platform_bionic/libc/arch-mips64/bionic/_setjmp.S

/*	$OpenBSD: _setjmp.S,v 1.4 2005/08/07 16:40:15 espie Exp $ */

/*
 * Copyright (c) 2002 Opsycon AB  (www.opsycon.se / www.opsycon.com)
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. Neither the name of Opsycon AB nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
 * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 */

#include <private/bionic_asm.h>
#include <machine/regnum.h>
#include <machine/signal.h>

/*
 * _setjmp, _longjmp (not restoring signal state)
 *
 * XXX FPSET should probably be taken from SR setting. hmmm...
 *  GPOFF and FRAMESIZE must be the same for both _setjmp and _longjmp!
 *
 */

FRAMESZ= MKFSIZ(0,4)
GPOFF= FRAMESZ-2*REGSZ

#define FPREG64_S(FPR, OFF, BASE)       \
        swc1    FPR, OFF(BASE)  ;       \
        mfhc1   t0, FPR         ;       \
        sw      t0, OFF+4(BASE) ;

#define FPREG64_L(FPR, OFF, BASE)       \
        lw      t0, OFF+4(BASE) ;       \
        lw      t1, OFF(BASE)   ;       \
        mtc1    t1, FPR         ;       \
        mthc1   t0, FPR         ;       \

LEAF(_setjmp, FRAMESZ)
	PTR_SUBU sp, FRAMESZ
	SETUP_GP64(GPOFF, _setjmp)
	SAVE_GP(GPOFF)
	.set	noreorder
#if defined(__mips64)
	dli	v0, 0xACEDBADE			# sigcontext magic number
#else
	li	v0, 0xACEDBADE			# sigcontext magic number
#endif
	REG_S	v0, SC_REGS+ZERO*REGSZ(a0)
	REG_S	s0, SC_REGS+S0*REGSZ(a0)
	REG_S	s1, SC_REGS+S1*REGSZ(a0)
	REG_S	s2, SC_REGS+S2*REGSZ(a0)
	REG_S	s3, SC_REGS+S3*REGSZ(a0)
	REG_S	s4, SC_REGS+S4*REGSZ(a0)
	REG_S	s5, SC_REGS+S5*REGSZ(a0)
	REG_S	s6, SC_REGS+S6*REGSZ(a0)
	REG_S	s7, SC_REGS+S7*REGSZ(a0)
	REG_S	s8, SC_REGS+S8*REGSZ(a0)
	REG_L	v0, GPOFF(sp)
	REG_S	v0, SC_REGS+GP*REGSZ(a0)
	PTR_ADDU v0, sp, FRAMESZ
	REG_S	v0, SC_REGS+SP*REGSZ(a0)
	REG_S	ra, SC_PC(a0)

#if !defined(SOFTFLOAT)
	li	v0, 1				# be nice if we could tell
	REG_S	v0, SC_FPUSED(a0)		# sc_fpused = 1
	cfc1	v0, $31
#if _MIPS_FPSET == 32
        FPREG64_S($f20, SC_FPREGS+((F20-F0)*REGSZ_FP), a0)
        FPREG64_S($f21, SC_FPREGS+((F21-F0)*REGSZ_FP), a0)
        FPREG64_S($f22, SC_FPREGS+((F22-F0)*REGSZ_FP), a0)
        FPREG64_S($f23, SC_FPREGS+((F23-F0)*REGSZ_FP), a0)
        FPREG64_S($f24, SC_FPREGS+((F24-F0)*REGSZ_FP), a0)
        FPREG64_S($f25, SC_FPREGS+((F25-F0)*REGSZ_FP), a0)
        FPREG64_S($f26, SC_FPREGS+((F26-F0)*REGSZ_FP), a0)
        FPREG64_S($f27, SC_FPREGS+((F27-F0)*REGSZ_FP), a0)
        FPREG64_S($f28, SC_FPREGS+((F28-F0)*REGSZ_FP), a0)
        FPREG64_S($f29, SC_FPREGS+((F29-F0)*REGSZ_FP), a0)
        FPREG64_S($f30, SC_FPREGS+((F30-F0)*REGSZ_FP), a0)
        FPREG64_S($f31, SC_FPREGS+((F31-F0)*REGSZ_FP), a0)
#else
        swc1    $f20, SC_FPREGS+((F20-F0)*REGSZ_FP)(a0)
        swc1    $f21, SC_FPREGS+((F21-F0)*REGSZ_FP)(a0)
        swc1    $f22, SC_FPREGS+((F22-F0)*REGSZ_FP)(a0)
        swc1    $f23, SC_FPREGS+((F23-F0)*REGSZ_FP)(a0)
        swc1    $f24, SC_FPREGS+((F24-F0)*REGSZ_FP)(a0)
        swc1    $f25, SC_FPREGS+((F25-F0)*REGSZ_FP)(a0)
        swc1    $f26, SC_FPREGS+((F26-F0)*REGSZ_FP)(a0)
        swc1    $f27, SC_FPREGS+((F27-F0)*REGSZ_FP)(a0)
        swc1    $f28, SC_FPREGS+((F28-F0)*REGSZ_FP)(a0)
        swc1    $f29, SC_FPREGS+((F29-F0)*REGSZ_FP)(a0)
        swc1    $f30, SC_FPREGS+((F30-F0)*REGSZ_FP)(a0)
        swc1    $f31, SC_FPREGS+((F31-F0)*REGSZ_FP)(a0)
#endif
	REG_S	v0, SC_FPREGS+((FSR-F0)*REGSZ)(a0)
#endif /* !SOFTFLOAT */
	RESTORE_GP64
	PTR_ADDU sp, FRAMESZ
	j	ra
	 move	v0, zero
END(_setjmp)

LEAF(_longjmp, FRAMESZ)
	PTR_SUBU sp, FRAMESZ
	SETUP_GP64(GPOFF, _longjmp)
	SAVE_GP(GPOFF)
	.set    noreorder
	REG_L	v0, SC_REGS+ZERO*REGSZ(a0)
	bne	v0, 0xACEDBADE, botch		# jump if error
	REG_L	ra, SC_PC(a0)
	REG_L	v0, SC_FPREGS+((FSR-F0)*REGSZ)(a0)
	REG_L	s0, SC_REGS+S0*REGSZ(a0)
	REG_L	s1, SC_REGS+S1*REGSZ(a0)
	REG_L	s2, SC_REGS+S2*REGSZ(a0)
	REG_L	s3, SC_REGS+S3*REGSZ(a0)
	REG_L	s4, SC_REGS+S4*REGSZ(a0)
	REG_L	s5, SC_REGS+S5*REGSZ(a0)
	REG_L	s6, SC_REGS+S6*REGSZ(a0)
	REG_L	s7, SC_REGS+S7*REGSZ(a0)
	REG_L	s8, SC_REGS+S8*REGSZ(a0)
	REG_L	gp, SC_REGS+GP*REGSZ(a0)
	REG_L	sp, SC_REGS+SP*REGSZ(a0)
#if !defined(SOFTFLOAT)
	ctc1	v0, $31
#if _MIPS_FPSET == 32
        FPREG64_L($f20, SC_FPREGS+((F20-F0)*REGSZ_FP), a0)
        FPREG64_L($f21, SC_FPREGS+((F21-F0)*REGSZ_FP), a0)
        FPREG64_L($f22, SC_FPREGS+((F22-F0)*REGSZ_FP), a0)
        FPREG64_L($f23, SC_FPREGS+((F23-F0)*REGSZ_FP), a0)
        FPREG64_L($f24, SC_FPREGS+((F24-F0)*REGSZ_FP), a0)
        FPREG64_L($f25, SC_FPREGS+((F25-F0)*REGSZ_FP), a0)
        FPREG64_L($f26, SC_FPREGS+((F26-F0)*REGSZ_FP), a0)
        FPREG64_L($f27, SC_FPREGS+((F27-F0)*REGSZ_FP), a0)
        FPREG64_L($f28, SC_FPREGS+((F28-F0)*REGSZ_FP), a0)
        FPREG64_L($f29, SC_FPREGS+((F29-F0)*REGSZ_FP), a0)
        FPREG64_L($f30, SC_FPREGS+((F30-F0)*REGSZ_FP), a0)
        FPREG64_L($f31, SC_FPREGS+((F31-F0)*REGSZ_FP), a0)
#else
        lwc1    $f20, SC_FPREGS+((F20-F0)*REGSZ_FP)(a0)
        lwc1    $f21, SC_FPREGS+((F21-F0)*REGSZ_FP)(a0)
        lwc1    $f22, SC_FPREGS+((F22-F0)*REGSZ_FP)(a0)
        lwc1    $f23, SC_FPREGS+((F23-F0)*REGSZ_FP)(a0)
        lwc1    $f24, SC_FPREGS+((F24-F0)*REGSZ_FP)(a0)
        lwc1    $f25, SC_FPREGS+((F25-F0)*REGSZ_FP)(a0)
        lwc1    $f26, SC_FPREGS+((F26-F0)*REGSZ_FP)(a0)
        lwc1    $f27, SC_FPREGS+((F27-F0)*REGSZ_FP)(a0)
        lwc1    $f28, SC_FPREGS+((F28-F0)*REGSZ_FP)(a0)
        lwc1    $f29, SC_FPREGS+((F29-F0)*REGSZ_FP)(a0)
        lwc1    $f30, SC_FPREGS+((F30-F0)*REGSZ_FP)(a0)
        lwc1    $f31, SC_FPREGS+((F31-F0)*REGSZ_FP)(a0)
#endif
#endif /* !SOFTFLOAT */
	bne	a1, zero, 1f
	 nop
	li	a1, 1			# never return 0!
1:
	j	ra
	 move	v0, a1

botch:
	jal	longjmperror
	nop
	jal	abort
	nop
	RESTORE_GP64
	PTR_ADDU sp, FRAMESZ
END(_longjmp)