platform_bionic/libc/bionic/malloc_common.cpp

282 lines
9.9 KiB
C++
Raw Normal View History

Malloc debug rewrite. The major components of the rewrite: - Completely remove the qemu shared library code. Nobody was using it and it appears to have broken at some point. - Adds the ability to enable/disable different options independently. - Adds a new option that can enable the backtrace on alloc/free when a process gets a specific signal. - Adds a new way to enable malloc debug. If a special property is set, and the process has an environment variable set, then debug malloc will be enabled. This allows something that might be a derivative of app_process to be started with an environment variable being enabled. - get_malloc_leak_info() used to return one element for each pointer that had the exact same backtrace. The new version returns information for every one of the pointers with same backtrace. It turns out ddms already automatically coalesces these, so the old method simply hid the fact that there where multiple pointers with the same amount of backtrace. - Moved all of the malloc debug specific code into the library. Nothing related to the malloc debug data structures remains in libc. - Removed the calls to the debug malloc cleanup routine. Instead, I added an atexit call with the debug malloc cleanup routine. This gets around most problems related to the timing of doing the cleanup. The new properties and environment variables: libc.debug.malloc.options Set by option name (such as "backtrace"). Setting this to a bad value will cause a usage statement to be printed to the log. libc.debug.malloc.program Same as before. If this is set, then only the program named will be launched with malloc debug enabled. This is not a complete match, but if any part of the property is in the program name, malloc debug is enabled. libc.debug.malloc.env_enabled If set, then malloc debug is only enabled if the running process has the environment variable LIBC_DEBUG_MALLOC_ENABLE set. Bug: 19145921 Change-Id: I7b0e58cc85cc6d4118173fe1f8627a391b64c0d7
2015-11-17 02:30:32 +01:00
/*
* Copyright (C) 2009 The Android Open Source Project
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
// Contains a thin layer that calls whatever real native allocator
// has been defined. For the libc shared library, this allows the
// implementation of a debug malloc that can intercept all of the allocation
// calls and add special debugging code to attempt to catch allocation
// errors. All of the debugging code is implemented in a separate shared
// library that is only loaded when the property "libc.debug.malloc.options"
// is set to a non-zero value.
Malloc debug rewrite. The major components of the rewrite: - Completely remove the qemu shared library code. Nobody was using it and it appears to have broken at some point. - Adds the ability to enable/disable different options independently. - Adds a new option that can enable the backtrace on alloc/free when a process gets a specific signal. - Adds a new way to enable malloc debug. If a special property is set, and the process has an environment variable set, then debug malloc will be enabled. This allows something that might be a derivative of app_process to be started with an environment variable being enabled. - get_malloc_leak_info() used to return one element for each pointer that had the exact same backtrace. The new version returns information for every one of the pointers with same backtrace. It turns out ddms already automatically coalesces these, so the old method simply hid the fact that there where multiple pointers with the same amount of backtrace. - Moved all of the malloc debug specific code into the library. Nothing related to the malloc debug data structures remains in libc. - Removed the calls to the debug malloc cleanup routine. Instead, I added an atexit call with the debug malloc cleanup routine. This gets around most problems related to the timing of doing the cleanup. The new properties and environment variables: libc.debug.malloc.options Set by option name (such as "backtrace"). Setting this to a bad value will cause a usage statement to be printed to the log. libc.debug.malloc.program Same as before. If this is set, then only the program named will be launched with malloc debug enabled. This is not a complete match, but if any part of the property is in the program name, malloc debug is enabled. libc.debug.malloc.env_enabled If set, then malloc debug is only enabled if the running process has the environment variable LIBC_DEBUG_MALLOC_ENABLE set. Bug: 19145921 Change-Id: I7b0e58cc85cc6d4118173fe1f8627a391b64c0d7
2015-11-17 02:30:32 +01:00
#include <errno.h>
#include <stdint.h>
#include <stdio.h>
Malloc debug rewrite. The major components of the rewrite: - Completely remove the qemu shared library code. Nobody was using it and it appears to have broken at some point. - Adds the ability to enable/disable different options independently. - Adds a new option that can enable the backtrace on alloc/free when a process gets a specific signal. - Adds a new way to enable malloc debug. If a special property is set, and the process has an environment variable set, then debug malloc will be enabled. This allows something that might be a derivative of app_process to be started with an environment variable being enabled. - get_malloc_leak_info() used to return one element for each pointer that had the exact same backtrace. The new version returns information for every one of the pointers with same backtrace. It turns out ddms already automatically coalesces these, so the old method simply hid the fact that there where multiple pointers with the same amount of backtrace. - Moved all of the malloc debug specific code into the library. Nothing related to the malloc debug data structures remains in libc. - Removed the calls to the debug malloc cleanup routine. Instead, I added an atexit call with the debug malloc cleanup routine. This gets around most problems related to the timing of doing the cleanup. The new properties and environment variables: libc.debug.malloc.options Set by option name (such as "backtrace"). Setting this to a bad value will cause a usage statement to be printed to the log. libc.debug.malloc.program Same as before. If this is set, then only the program named will be launched with malloc debug enabled. This is not a complete match, but if any part of the property is in the program name, malloc debug is enabled. libc.debug.malloc.env_enabled If set, then malloc debug is only enabled if the running process has the environment variable LIBC_DEBUG_MALLOC_ENABLE set. Bug: 19145921 Change-Id: I7b0e58cc85cc6d4118173fe1f8627a391b64c0d7
2015-11-17 02:30:32 +01:00
#include <private/bionic_config.h>
#include <platform/bionic/malloc.h>
Malloc debug rewrite. The major components of the rewrite: - Completely remove the qemu shared library code. Nobody was using it and it appears to have broken at some point. - Adds the ability to enable/disable different options independently. - Adds a new option that can enable the backtrace on alloc/free when a process gets a specific signal. - Adds a new way to enable malloc debug. If a special property is set, and the process has an environment variable set, then debug malloc will be enabled. This allows something that might be a derivative of app_process to be started with an environment variable being enabled. - get_malloc_leak_info() used to return one element for each pointer that had the exact same backtrace. The new version returns information for every one of the pointers with same backtrace. It turns out ddms already automatically coalesces these, so the old method simply hid the fact that there where multiple pointers with the same amount of backtrace. - Moved all of the malloc debug specific code into the library. Nothing related to the malloc debug data structures remains in libc. - Removed the calls to the debug malloc cleanup routine. Instead, I added an atexit call with the debug malloc cleanup routine. This gets around most problems related to the timing of doing the cleanup. The new properties and environment variables: libc.debug.malloc.options Set by option name (such as "backtrace"). Setting this to a bad value will cause a usage statement to be printed to the log. libc.debug.malloc.program Same as before. If this is set, then only the program named will be launched with malloc debug enabled. This is not a complete match, but if any part of the property is in the program name, malloc debug is enabled. libc.debug.malloc.env_enabled If set, then malloc debug is only enabled if the running process has the environment variable LIBC_DEBUG_MALLOC_ENABLE set. Bug: 19145921 Change-Id: I7b0e58cc85cc6d4118173fe1f8627a391b64c0d7
2015-11-17 02:30:32 +01:00
#include "malloc_common.h"
#include "malloc_limit.h"
// =============================================================================
// Global variables instantations.
// =============================================================================
Malloc debug rewrite. The major components of the rewrite: - Completely remove the qemu shared library code. Nobody was using it and it appears to have broken at some point. - Adds the ability to enable/disable different options independently. - Adds a new option that can enable the backtrace on alloc/free when a process gets a specific signal. - Adds a new way to enable malloc debug. If a special property is set, and the process has an environment variable set, then debug malloc will be enabled. This allows something that might be a derivative of app_process to be started with an environment variable being enabled. - get_malloc_leak_info() used to return one element for each pointer that had the exact same backtrace. The new version returns information for every one of the pointers with same backtrace. It turns out ddms already automatically coalesces these, so the old method simply hid the fact that there where multiple pointers with the same amount of backtrace. - Moved all of the malloc debug specific code into the library. Nothing related to the malloc debug data structures remains in libc. - Removed the calls to the debug malloc cleanup routine. Instead, I added an atexit call with the debug malloc cleanup routine. This gets around most problems related to the timing of doing the cleanup. The new properties and environment variables: libc.debug.malloc.options Set by option name (such as "backtrace"). Setting this to a bad value will cause a usage statement to be printed to the log. libc.debug.malloc.program Same as before. If this is set, then only the program named will be launched with malloc debug enabled. This is not a complete match, but if any part of the property is in the program name, malloc debug is enabled. libc.debug.malloc.env_enabled If set, then malloc debug is only enabled if the running process has the environment variable LIBC_DEBUG_MALLOC_ENABLE set. Bug: 19145921 Change-Id: I7b0e58cc85cc6d4118173fe1f8627a391b64c0d7
2015-11-17 02:30:32 +01:00
// Malloc hooks globals.
void* (*volatile __malloc_hook)(size_t, const void*);
void* (*volatile __realloc_hook)(void*, size_t, const void*);
void (*volatile __free_hook)(void*, const void*);
void* (*volatile __memalign_hook)(size_t, size_t, const void*);
// =============================================================================
Malloc debug rewrite. The major components of the rewrite: - Completely remove the qemu shared library code. Nobody was using it and it appears to have broken at some point. - Adds the ability to enable/disable different options independently. - Adds a new option that can enable the backtrace on alloc/free when a process gets a specific signal. - Adds a new way to enable malloc debug. If a special property is set, and the process has an environment variable set, then debug malloc will be enabled. This allows something that might be a derivative of app_process to be started with an environment variable being enabled. - get_malloc_leak_info() used to return one element for each pointer that had the exact same backtrace. The new version returns information for every one of the pointers with same backtrace. It turns out ddms already automatically coalesces these, so the old method simply hid the fact that there where multiple pointers with the same amount of backtrace. - Moved all of the malloc debug specific code into the library. Nothing related to the malloc debug data structures remains in libc. - Removed the calls to the debug malloc cleanup routine. Instead, I added an atexit call with the debug malloc cleanup routine. This gets around most problems related to the timing of doing the cleanup. The new properties and environment variables: libc.debug.malloc.options Set by option name (such as "backtrace"). Setting this to a bad value will cause a usage statement to be printed to the log. libc.debug.malloc.program Same as before. If this is set, then only the program named will be launched with malloc debug enabled. This is not a complete match, but if any part of the property is in the program name, malloc debug is enabled. libc.debug.malloc.env_enabled If set, then malloc debug is only enabled if the running process has the environment variable LIBC_DEBUG_MALLOC_ENABLE set. Bug: 19145921 Change-Id: I7b0e58cc85cc6d4118173fe1f8627a391b64c0d7
2015-11-17 02:30:32 +01:00
// =============================================================================
// Allocation functions
// =============================================================================
extern "C" void* calloc(size_t n_elements, size_t elem_size) {
auto dispatch_table = GetDispatchTable();
if (__predict_false(dispatch_table != nullptr)) {
return dispatch_table->calloc(n_elements, elem_size);
Malloc debug rewrite. The major components of the rewrite: - Completely remove the qemu shared library code. Nobody was using it and it appears to have broken at some point. - Adds the ability to enable/disable different options independently. - Adds a new option that can enable the backtrace on alloc/free when a process gets a specific signal. - Adds a new way to enable malloc debug. If a special property is set, and the process has an environment variable set, then debug malloc will be enabled. This allows something that might be a derivative of app_process to be started with an environment variable being enabled. - get_malloc_leak_info() used to return one element for each pointer that had the exact same backtrace. The new version returns information for every one of the pointers with same backtrace. It turns out ddms already automatically coalesces these, so the old method simply hid the fact that there where multiple pointers with the same amount of backtrace. - Moved all of the malloc debug specific code into the library. Nothing related to the malloc debug data structures remains in libc. - Removed the calls to the debug malloc cleanup routine. Instead, I added an atexit call with the debug malloc cleanup routine. This gets around most problems related to the timing of doing the cleanup. The new properties and environment variables: libc.debug.malloc.options Set by option name (such as "backtrace"). Setting this to a bad value will cause a usage statement to be printed to the log. libc.debug.malloc.program Same as before. If this is set, then only the program named will be launched with malloc debug enabled. This is not a complete match, but if any part of the property is in the program name, malloc debug is enabled. libc.debug.malloc.env_enabled If set, then malloc debug is only enabled if the running process has the environment variable LIBC_DEBUG_MALLOC_ENABLE set. Bug: 19145921 Change-Id: I7b0e58cc85cc6d4118173fe1f8627a391b64c0d7
2015-11-17 02:30:32 +01:00
}
void* result = Malloc(calloc)(n_elements, elem_size);
if (__predict_false(result == nullptr)) {
warning_log("calloc(%zu, %zu) failed: returning null pointer", n_elements, elem_size);
}
return result;
Malloc debug rewrite. The major components of the rewrite: - Completely remove the qemu shared library code. Nobody was using it and it appears to have broken at some point. - Adds the ability to enable/disable different options independently. - Adds a new option that can enable the backtrace on alloc/free when a process gets a specific signal. - Adds a new way to enable malloc debug. If a special property is set, and the process has an environment variable set, then debug malloc will be enabled. This allows something that might be a derivative of app_process to be started with an environment variable being enabled. - get_malloc_leak_info() used to return one element for each pointer that had the exact same backtrace. The new version returns information for every one of the pointers with same backtrace. It turns out ddms already automatically coalesces these, so the old method simply hid the fact that there where multiple pointers with the same amount of backtrace. - Moved all of the malloc debug specific code into the library. Nothing related to the malloc debug data structures remains in libc. - Removed the calls to the debug malloc cleanup routine. Instead, I added an atexit call with the debug malloc cleanup routine. This gets around most problems related to the timing of doing the cleanup. The new properties and environment variables: libc.debug.malloc.options Set by option name (such as "backtrace"). Setting this to a bad value will cause a usage statement to be printed to the log. libc.debug.malloc.program Same as before. If this is set, then only the program named will be launched with malloc debug enabled. This is not a complete match, but if any part of the property is in the program name, malloc debug is enabled. libc.debug.malloc.env_enabled If set, then malloc debug is only enabled if the running process has the environment variable LIBC_DEBUG_MALLOC_ENABLE set. Bug: 19145921 Change-Id: I7b0e58cc85cc6d4118173fe1f8627a391b64c0d7
2015-11-17 02:30:32 +01:00
}
extern "C" void free(void* mem) {
auto dispatch_table = GetDispatchTable();
if (__predict_false(dispatch_table != nullptr)) {
dispatch_table->free(mem);
Malloc debug rewrite. The major components of the rewrite: - Completely remove the qemu shared library code. Nobody was using it and it appears to have broken at some point. - Adds the ability to enable/disable different options independently. - Adds a new option that can enable the backtrace on alloc/free when a process gets a specific signal. - Adds a new way to enable malloc debug. If a special property is set, and the process has an environment variable set, then debug malloc will be enabled. This allows something that might be a derivative of app_process to be started with an environment variable being enabled. - get_malloc_leak_info() used to return one element for each pointer that had the exact same backtrace. The new version returns information for every one of the pointers with same backtrace. It turns out ddms already automatically coalesces these, so the old method simply hid the fact that there where multiple pointers with the same amount of backtrace. - Moved all of the malloc debug specific code into the library. Nothing related to the malloc debug data structures remains in libc. - Removed the calls to the debug malloc cleanup routine. Instead, I added an atexit call with the debug malloc cleanup routine. This gets around most problems related to the timing of doing the cleanup. The new properties and environment variables: libc.debug.malloc.options Set by option name (such as "backtrace"). Setting this to a bad value will cause a usage statement to be printed to the log. libc.debug.malloc.program Same as before. If this is set, then only the program named will be launched with malloc debug enabled. This is not a complete match, but if any part of the property is in the program name, malloc debug is enabled. libc.debug.malloc.env_enabled If set, then malloc debug is only enabled if the running process has the environment variable LIBC_DEBUG_MALLOC_ENABLE set. Bug: 19145921 Change-Id: I7b0e58cc85cc6d4118173fe1f8627a391b64c0d7
2015-11-17 02:30:32 +01:00
} else {
Malloc(free)(mem);
}
}
extern "C" struct mallinfo mallinfo() {
auto dispatch_table = GetDispatchTable();
if (__predict_false(dispatch_table != nullptr)) {
return dispatch_table->mallinfo();
Malloc debug rewrite. The major components of the rewrite: - Completely remove the qemu shared library code. Nobody was using it and it appears to have broken at some point. - Adds the ability to enable/disable different options independently. - Adds a new option that can enable the backtrace on alloc/free when a process gets a specific signal. - Adds a new way to enable malloc debug. If a special property is set, and the process has an environment variable set, then debug malloc will be enabled. This allows something that might be a derivative of app_process to be started with an environment variable being enabled. - get_malloc_leak_info() used to return one element for each pointer that had the exact same backtrace. The new version returns information for every one of the pointers with same backtrace. It turns out ddms already automatically coalesces these, so the old method simply hid the fact that there where multiple pointers with the same amount of backtrace. - Moved all of the malloc debug specific code into the library. Nothing related to the malloc debug data structures remains in libc. - Removed the calls to the debug malloc cleanup routine. Instead, I added an atexit call with the debug malloc cleanup routine. This gets around most problems related to the timing of doing the cleanup. The new properties and environment variables: libc.debug.malloc.options Set by option name (such as "backtrace"). Setting this to a bad value will cause a usage statement to be printed to the log. libc.debug.malloc.program Same as before. If this is set, then only the program named will be launched with malloc debug enabled. This is not a complete match, but if any part of the property is in the program name, malloc debug is enabled. libc.debug.malloc.env_enabled If set, then malloc debug is only enabled if the running process has the environment variable LIBC_DEBUG_MALLOC_ENABLE set. Bug: 19145921 Change-Id: I7b0e58cc85cc6d4118173fe1f8627a391b64c0d7
2015-11-17 02:30:32 +01:00
}
return Malloc(mallinfo)();
}
extern "C" int malloc_info(int options, FILE* fp) {
auto dispatch_table = GetDispatchTable();
if (__predict_false(dispatch_table != nullptr)) {
return dispatch_table->malloc_info(options, fp);
}
return Malloc(malloc_info)(options, fp);
}
extern "C" int mallopt(int param, int value) {
auto dispatch_table = GetDispatchTable();
if (__predict_false(dispatch_table != nullptr)) {
return dispatch_table->mallopt(param, value);
}
return Malloc(mallopt)(param, value);
}
Malloc debug rewrite. The major components of the rewrite: - Completely remove the qemu shared library code. Nobody was using it and it appears to have broken at some point. - Adds the ability to enable/disable different options independently. - Adds a new option that can enable the backtrace on alloc/free when a process gets a specific signal. - Adds a new way to enable malloc debug. If a special property is set, and the process has an environment variable set, then debug malloc will be enabled. This allows something that might be a derivative of app_process to be started with an environment variable being enabled. - get_malloc_leak_info() used to return one element for each pointer that had the exact same backtrace. The new version returns information for every one of the pointers with same backtrace. It turns out ddms already automatically coalesces these, so the old method simply hid the fact that there where multiple pointers with the same amount of backtrace. - Moved all of the malloc debug specific code into the library. Nothing related to the malloc debug data structures remains in libc. - Removed the calls to the debug malloc cleanup routine. Instead, I added an atexit call with the debug malloc cleanup routine. This gets around most problems related to the timing of doing the cleanup. The new properties and environment variables: libc.debug.malloc.options Set by option name (such as "backtrace"). Setting this to a bad value will cause a usage statement to be printed to the log. libc.debug.malloc.program Same as before. If this is set, then only the program named will be launched with malloc debug enabled. This is not a complete match, but if any part of the property is in the program name, malloc debug is enabled. libc.debug.malloc.env_enabled If set, then malloc debug is only enabled if the running process has the environment variable LIBC_DEBUG_MALLOC_ENABLE set. Bug: 19145921 Change-Id: I7b0e58cc85cc6d4118173fe1f8627a391b64c0d7
2015-11-17 02:30:32 +01:00
extern "C" void* malloc(size_t bytes) {
auto dispatch_table = GetDispatchTable();
if (__predict_false(dispatch_table != nullptr)) {
return dispatch_table->malloc(bytes);
Malloc debug rewrite. The major components of the rewrite: - Completely remove the qemu shared library code. Nobody was using it and it appears to have broken at some point. - Adds the ability to enable/disable different options independently. - Adds a new option that can enable the backtrace on alloc/free when a process gets a specific signal. - Adds a new way to enable malloc debug. If a special property is set, and the process has an environment variable set, then debug malloc will be enabled. This allows something that might be a derivative of app_process to be started with an environment variable being enabled. - get_malloc_leak_info() used to return one element for each pointer that had the exact same backtrace. The new version returns information for every one of the pointers with same backtrace. It turns out ddms already automatically coalesces these, so the old method simply hid the fact that there where multiple pointers with the same amount of backtrace. - Moved all of the malloc debug specific code into the library. Nothing related to the malloc debug data structures remains in libc. - Removed the calls to the debug malloc cleanup routine. Instead, I added an atexit call with the debug malloc cleanup routine. This gets around most problems related to the timing of doing the cleanup. The new properties and environment variables: libc.debug.malloc.options Set by option name (such as "backtrace"). Setting this to a bad value will cause a usage statement to be printed to the log. libc.debug.malloc.program Same as before. If this is set, then only the program named will be launched with malloc debug enabled. This is not a complete match, but if any part of the property is in the program name, malloc debug is enabled. libc.debug.malloc.env_enabled If set, then malloc debug is only enabled if the running process has the environment variable LIBC_DEBUG_MALLOC_ENABLE set. Bug: 19145921 Change-Id: I7b0e58cc85cc6d4118173fe1f8627a391b64c0d7
2015-11-17 02:30:32 +01:00
}
void* result = Malloc(malloc)(bytes);
if (__predict_false(result == nullptr)) {
warning_log("malloc(%zu) failed: returning null pointer", bytes);
}
return result;
Malloc debug rewrite. The major components of the rewrite: - Completely remove the qemu shared library code. Nobody was using it and it appears to have broken at some point. - Adds the ability to enable/disable different options independently. - Adds a new option that can enable the backtrace on alloc/free when a process gets a specific signal. - Adds a new way to enable malloc debug. If a special property is set, and the process has an environment variable set, then debug malloc will be enabled. This allows something that might be a derivative of app_process to be started with an environment variable being enabled. - get_malloc_leak_info() used to return one element for each pointer that had the exact same backtrace. The new version returns information for every one of the pointers with same backtrace. It turns out ddms already automatically coalesces these, so the old method simply hid the fact that there where multiple pointers with the same amount of backtrace. - Moved all of the malloc debug specific code into the library. Nothing related to the malloc debug data structures remains in libc. - Removed the calls to the debug malloc cleanup routine. Instead, I added an atexit call with the debug malloc cleanup routine. This gets around most problems related to the timing of doing the cleanup. The new properties and environment variables: libc.debug.malloc.options Set by option name (such as "backtrace"). Setting this to a bad value will cause a usage statement to be printed to the log. libc.debug.malloc.program Same as before. If this is set, then only the program named will be launched with malloc debug enabled. This is not a complete match, but if any part of the property is in the program name, malloc debug is enabled. libc.debug.malloc.env_enabled If set, then malloc debug is only enabled if the running process has the environment variable LIBC_DEBUG_MALLOC_ENABLE set. Bug: 19145921 Change-Id: I7b0e58cc85cc6d4118173fe1f8627a391b64c0d7
2015-11-17 02:30:32 +01:00
}
extern "C" size_t malloc_usable_size(const void* mem) {
auto dispatch_table = GetDispatchTable();
if (__predict_false(dispatch_table != nullptr)) {
return dispatch_table->malloc_usable_size(mem);
Malloc debug rewrite. The major components of the rewrite: - Completely remove the qemu shared library code. Nobody was using it and it appears to have broken at some point. - Adds the ability to enable/disable different options independently. - Adds a new option that can enable the backtrace on alloc/free when a process gets a specific signal. - Adds a new way to enable malloc debug. If a special property is set, and the process has an environment variable set, then debug malloc will be enabled. This allows something that might be a derivative of app_process to be started with an environment variable being enabled. - get_malloc_leak_info() used to return one element for each pointer that had the exact same backtrace. The new version returns information for every one of the pointers with same backtrace. It turns out ddms already automatically coalesces these, so the old method simply hid the fact that there where multiple pointers with the same amount of backtrace. - Moved all of the malloc debug specific code into the library. Nothing related to the malloc debug data structures remains in libc. - Removed the calls to the debug malloc cleanup routine. Instead, I added an atexit call with the debug malloc cleanup routine. This gets around most problems related to the timing of doing the cleanup. The new properties and environment variables: libc.debug.malloc.options Set by option name (such as "backtrace"). Setting this to a bad value will cause a usage statement to be printed to the log. libc.debug.malloc.program Same as before. If this is set, then only the program named will be launched with malloc debug enabled. This is not a complete match, but if any part of the property is in the program name, malloc debug is enabled. libc.debug.malloc.env_enabled If set, then malloc debug is only enabled if the running process has the environment variable LIBC_DEBUG_MALLOC_ENABLE set. Bug: 19145921 Change-Id: I7b0e58cc85cc6d4118173fe1f8627a391b64c0d7
2015-11-17 02:30:32 +01:00
}
return Malloc(malloc_usable_size)(mem);
}
extern "C" void* memalign(size_t alignment, size_t bytes) {
auto dispatch_table = GetDispatchTable();
if (__predict_false(dispatch_table != nullptr)) {
return dispatch_table->memalign(alignment, bytes);
Malloc debug rewrite. The major components of the rewrite: - Completely remove the qemu shared library code. Nobody was using it and it appears to have broken at some point. - Adds the ability to enable/disable different options independently. - Adds a new option that can enable the backtrace on alloc/free when a process gets a specific signal. - Adds a new way to enable malloc debug. If a special property is set, and the process has an environment variable set, then debug malloc will be enabled. This allows something that might be a derivative of app_process to be started with an environment variable being enabled. - get_malloc_leak_info() used to return one element for each pointer that had the exact same backtrace. The new version returns information for every one of the pointers with same backtrace. It turns out ddms already automatically coalesces these, so the old method simply hid the fact that there where multiple pointers with the same amount of backtrace. - Moved all of the malloc debug specific code into the library. Nothing related to the malloc debug data structures remains in libc. - Removed the calls to the debug malloc cleanup routine. Instead, I added an atexit call with the debug malloc cleanup routine. This gets around most problems related to the timing of doing the cleanup. The new properties and environment variables: libc.debug.malloc.options Set by option name (such as "backtrace"). Setting this to a bad value will cause a usage statement to be printed to the log. libc.debug.malloc.program Same as before. If this is set, then only the program named will be launched with malloc debug enabled. This is not a complete match, but if any part of the property is in the program name, malloc debug is enabled. libc.debug.malloc.env_enabled If set, then malloc debug is only enabled if the running process has the environment variable LIBC_DEBUG_MALLOC_ENABLE set. Bug: 19145921 Change-Id: I7b0e58cc85cc6d4118173fe1f8627a391b64c0d7
2015-11-17 02:30:32 +01:00
}
void* result = Malloc(memalign)(alignment, bytes);
if (__predict_false(result == nullptr)) {
warning_log("memalign(%zu, %zu) failed: returning null pointer", alignment, bytes);
}
return result;
Malloc debug rewrite. The major components of the rewrite: - Completely remove the qemu shared library code. Nobody was using it and it appears to have broken at some point. - Adds the ability to enable/disable different options independently. - Adds a new option that can enable the backtrace on alloc/free when a process gets a specific signal. - Adds a new way to enable malloc debug. If a special property is set, and the process has an environment variable set, then debug malloc will be enabled. This allows something that might be a derivative of app_process to be started with an environment variable being enabled. - get_malloc_leak_info() used to return one element for each pointer that had the exact same backtrace. The new version returns information for every one of the pointers with same backtrace. It turns out ddms already automatically coalesces these, so the old method simply hid the fact that there where multiple pointers with the same amount of backtrace. - Moved all of the malloc debug specific code into the library. Nothing related to the malloc debug data structures remains in libc. - Removed the calls to the debug malloc cleanup routine. Instead, I added an atexit call with the debug malloc cleanup routine. This gets around most problems related to the timing of doing the cleanup. The new properties and environment variables: libc.debug.malloc.options Set by option name (such as "backtrace"). Setting this to a bad value will cause a usage statement to be printed to the log. libc.debug.malloc.program Same as before. If this is set, then only the program named will be launched with malloc debug enabled. This is not a complete match, but if any part of the property is in the program name, malloc debug is enabled. libc.debug.malloc.env_enabled If set, then malloc debug is only enabled if the running process has the environment variable LIBC_DEBUG_MALLOC_ENABLE set. Bug: 19145921 Change-Id: I7b0e58cc85cc6d4118173fe1f8627a391b64c0d7
2015-11-17 02:30:32 +01:00
}
extern "C" int posix_memalign(void** memptr, size_t alignment, size_t size) {
auto dispatch_table = GetDispatchTable();
if (__predict_false(dispatch_table != nullptr)) {
return dispatch_table->posix_memalign(memptr, alignment, size);
Malloc debug rewrite. The major components of the rewrite: - Completely remove the qemu shared library code. Nobody was using it and it appears to have broken at some point. - Adds the ability to enable/disable different options independently. - Adds a new option that can enable the backtrace on alloc/free when a process gets a specific signal. - Adds a new way to enable malloc debug. If a special property is set, and the process has an environment variable set, then debug malloc will be enabled. This allows something that might be a derivative of app_process to be started with an environment variable being enabled. - get_malloc_leak_info() used to return one element for each pointer that had the exact same backtrace. The new version returns information for every one of the pointers with same backtrace. It turns out ddms already automatically coalesces these, so the old method simply hid the fact that there where multiple pointers with the same amount of backtrace. - Moved all of the malloc debug specific code into the library. Nothing related to the malloc debug data structures remains in libc. - Removed the calls to the debug malloc cleanup routine. Instead, I added an atexit call with the debug malloc cleanup routine. This gets around most problems related to the timing of doing the cleanup. The new properties and environment variables: libc.debug.malloc.options Set by option name (such as "backtrace"). Setting this to a bad value will cause a usage statement to be printed to the log. libc.debug.malloc.program Same as before. If this is set, then only the program named will be launched with malloc debug enabled. This is not a complete match, but if any part of the property is in the program name, malloc debug is enabled. libc.debug.malloc.env_enabled If set, then malloc debug is only enabled if the running process has the environment variable LIBC_DEBUG_MALLOC_ENABLE set. Bug: 19145921 Change-Id: I7b0e58cc85cc6d4118173fe1f8627a391b64c0d7
2015-11-17 02:30:32 +01:00
}
return Malloc(posix_memalign)(memptr, alignment, size);
}
extern "C" void* aligned_alloc(size_t alignment, size_t size) {
auto dispatch_table = GetDispatchTable();
if (__predict_false(dispatch_table != nullptr)) {
return dispatch_table->aligned_alloc(alignment, size);
}
void* result = Malloc(aligned_alloc)(alignment, size);
if (__predict_false(result == nullptr)) {
warning_log("aligned_alloc(%zu, %zu) failed: returning null pointer", alignment, size);
}
return result;
}
extern "C" __attribute__((__noinline__)) void* realloc(void* old_mem, size_t bytes) {
auto dispatch_table = GetDispatchTable();
if (__predict_false(dispatch_table != nullptr)) {
return dispatch_table->realloc(old_mem, bytes);
Malloc debug rewrite. The major components of the rewrite: - Completely remove the qemu shared library code. Nobody was using it and it appears to have broken at some point. - Adds the ability to enable/disable different options independently. - Adds a new option that can enable the backtrace on alloc/free when a process gets a specific signal. - Adds a new way to enable malloc debug. If a special property is set, and the process has an environment variable set, then debug malloc will be enabled. This allows something that might be a derivative of app_process to be started with an environment variable being enabled. - get_malloc_leak_info() used to return one element for each pointer that had the exact same backtrace. The new version returns information for every one of the pointers with same backtrace. It turns out ddms already automatically coalesces these, so the old method simply hid the fact that there where multiple pointers with the same amount of backtrace. - Moved all of the malloc debug specific code into the library. Nothing related to the malloc debug data structures remains in libc. - Removed the calls to the debug malloc cleanup routine. Instead, I added an atexit call with the debug malloc cleanup routine. This gets around most problems related to the timing of doing the cleanup. The new properties and environment variables: libc.debug.malloc.options Set by option name (such as "backtrace"). Setting this to a bad value will cause a usage statement to be printed to the log. libc.debug.malloc.program Same as before. If this is set, then only the program named will be launched with malloc debug enabled. This is not a complete match, but if any part of the property is in the program name, malloc debug is enabled. libc.debug.malloc.env_enabled If set, then malloc debug is only enabled if the running process has the environment variable LIBC_DEBUG_MALLOC_ENABLE set. Bug: 19145921 Change-Id: I7b0e58cc85cc6d4118173fe1f8627a391b64c0d7
2015-11-17 02:30:32 +01:00
}
void* result = Malloc(realloc)(old_mem, bytes);
if (__predict_false(result == nullptr && bytes != 0)) {
warning_log("realloc(%p, %zu) failed: returning null pointer", old_mem, bytes);
}
return result;
Malloc debug rewrite. The major components of the rewrite: - Completely remove the qemu shared library code. Nobody was using it and it appears to have broken at some point. - Adds the ability to enable/disable different options independently. - Adds a new option that can enable the backtrace on alloc/free when a process gets a specific signal. - Adds a new way to enable malloc debug. If a special property is set, and the process has an environment variable set, then debug malloc will be enabled. This allows something that might be a derivative of app_process to be started with an environment variable being enabled. - get_malloc_leak_info() used to return one element for each pointer that had the exact same backtrace. The new version returns information for every one of the pointers with same backtrace. It turns out ddms already automatically coalesces these, so the old method simply hid the fact that there where multiple pointers with the same amount of backtrace. - Moved all of the malloc debug specific code into the library. Nothing related to the malloc debug data structures remains in libc. - Removed the calls to the debug malloc cleanup routine. Instead, I added an atexit call with the debug malloc cleanup routine. This gets around most problems related to the timing of doing the cleanup. The new properties and environment variables: libc.debug.malloc.options Set by option name (such as "backtrace"). Setting this to a bad value will cause a usage statement to be printed to the log. libc.debug.malloc.program Same as before. If this is set, then only the program named will be launched with malloc debug enabled. This is not a complete match, but if any part of the property is in the program name, malloc debug is enabled. libc.debug.malloc.env_enabled If set, then malloc debug is only enabled if the running process has the environment variable LIBC_DEBUG_MALLOC_ENABLE set. Bug: 19145921 Change-Id: I7b0e58cc85cc6d4118173fe1f8627a391b64c0d7
2015-11-17 02:30:32 +01:00
}
extern "C" void* reallocarray(void* old_mem, size_t item_count, size_t item_size) {
size_t new_size;
if (__builtin_mul_overflow(item_count, item_size, &new_size)) {
warning_log("reallocaray(%p, %zu, %zu) failed: returning null pointer",
old_mem, item_count, item_size);
errno = ENOMEM;
return nullptr;
}
return realloc(old_mem, new_size);
}
Malloc debug rewrite. The major components of the rewrite: - Completely remove the qemu shared library code. Nobody was using it and it appears to have broken at some point. - Adds the ability to enable/disable different options independently. - Adds a new option that can enable the backtrace on alloc/free when a process gets a specific signal. - Adds a new way to enable malloc debug. If a special property is set, and the process has an environment variable set, then debug malloc will be enabled. This allows something that might be a derivative of app_process to be started with an environment variable being enabled. - get_malloc_leak_info() used to return one element for each pointer that had the exact same backtrace. The new version returns information for every one of the pointers with same backtrace. It turns out ddms already automatically coalesces these, so the old method simply hid the fact that there where multiple pointers with the same amount of backtrace. - Moved all of the malloc debug specific code into the library. Nothing related to the malloc debug data structures remains in libc. - Removed the calls to the debug malloc cleanup routine. Instead, I added an atexit call with the debug malloc cleanup routine. This gets around most problems related to the timing of doing the cleanup. The new properties and environment variables: libc.debug.malloc.options Set by option name (such as "backtrace"). Setting this to a bad value will cause a usage statement to be printed to the log. libc.debug.malloc.program Same as before. If this is set, then only the program named will be launched with malloc debug enabled. This is not a complete match, but if any part of the property is in the program name, malloc debug is enabled. libc.debug.malloc.env_enabled If set, then malloc debug is only enabled if the running process has the environment variable LIBC_DEBUG_MALLOC_ENABLE set. Bug: 19145921 Change-Id: I7b0e58cc85cc6d4118173fe1f8627a391b64c0d7
2015-11-17 02:30:32 +01:00
#if defined(HAVE_DEPRECATED_MALLOC_FUNCS)
extern "C" void* pvalloc(size_t bytes) {
auto dispatch_table = GetDispatchTable();
if (__predict_false(dispatch_table != nullptr)) {
return dispatch_table->pvalloc(bytes);
Malloc debug rewrite. The major components of the rewrite: - Completely remove the qemu shared library code. Nobody was using it and it appears to have broken at some point. - Adds the ability to enable/disable different options independently. - Adds a new option that can enable the backtrace on alloc/free when a process gets a specific signal. - Adds a new way to enable malloc debug. If a special property is set, and the process has an environment variable set, then debug malloc will be enabled. This allows something that might be a derivative of app_process to be started with an environment variable being enabled. - get_malloc_leak_info() used to return one element for each pointer that had the exact same backtrace. The new version returns information for every one of the pointers with same backtrace. It turns out ddms already automatically coalesces these, so the old method simply hid the fact that there where multiple pointers with the same amount of backtrace. - Moved all of the malloc debug specific code into the library. Nothing related to the malloc debug data structures remains in libc. - Removed the calls to the debug malloc cleanup routine. Instead, I added an atexit call with the debug malloc cleanup routine. This gets around most problems related to the timing of doing the cleanup. The new properties and environment variables: libc.debug.malloc.options Set by option name (such as "backtrace"). Setting this to a bad value will cause a usage statement to be printed to the log. libc.debug.malloc.program Same as before. If this is set, then only the program named will be launched with malloc debug enabled. This is not a complete match, but if any part of the property is in the program name, malloc debug is enabled. libc.debug.malloc.env_enabled If set, then malloc debug is only enabled if the running process has the environment variable LIBC_DEBUG_MALLOC_ENABLE set. Bug: 19145921 Change-Id: I7b0e58cc85cc6d4118173fe1f8627a391b64c0d7
2015-11-17 02:30:32 +01:00
}
void* result = Malloc(pvalloc)(bytes);
if (__predict_false(result == nullptr)) {
warning_log("pvalloc(%zu) failed: returning null pointer", bytes);
}
return result;
Malloc debug rewrite. The major components of the rewrite: - Completely remove the qemu shared library code. Nobody was using it and it appears to have broken at some point. - Adds the ability to enable/disable different options independently. - Adds a new option that can enable the backtrace on alloc/free when a process gets a specific signal. - Adds a new way to enable malloc debug. If a special property is set, and the process has an environment variable set, then debug malloc will be enabled. This allows something that might be a derivative of app_process to be started with an environment variable being enabled. - get_malloc_leak_info() used to return one element for each pointer that had the exact same backtrace. The new version returns information for every one of the pointers with same backtrace. It turns out ddms already automatically coalesces these, so the old method simply hid the fact that there where multiple pointers with the same amount of backtrace. - Moved all of the malloc debug specific code into the library. Nothing related to the malloc debug data structures remains in libc. - Removed the calls to the debug malloc cleanup routine. Instead, I added an atexit call with the debug malloc cleanup routine. This gets around most problems related to the timing of doing the cleanup. The new properties and environment variables: libc.debug.malloc.options Set by option name (such as "backtrace"). Setting this to a bad value will cause a usage statement to be printed to the log. libc.debug.malloc.program Same as before. If this is set, then only the program named will be launched with malloc debug enabled. This is not a complete match, but if any part of the property is in the program name, malloc debug is enabled. libc.debug.malloc.env_enabled If set, then malloc debug is only enabled if the running process has the environment variable LIBC_DEBUG_MALLOC_ENABLE set. Bug: 19145921 Change-Id: I7b0e58cc85cc6d4118173fe1f8627a391b64c0d7
2015-11-17 02:30:32 +01:00
}
extern "C" void* valloc(size_t bytes) {
auto dispatch_table = GetDispatchTable();
if (__predict_false(dispatch_table != nullptr)) {
return dispatch_table->valloc(bytes);
Malloc debug rewrite. The major components of the rewrite: - Completely remove the qemu shared library code. Nobody was using it and it appears to have broken at some point. - Adds the ability to enable/disable different options independently. - Adds a new option that can enable the backtrace on alloc/free when a process gets a specific signal. - Adds a new way to enable malloc debug. If a special property is set, and the process has an environment variable set, then debug malloc will be enabled. This allows something that might be a derivative of app_process to be started with an environment variable being enabled. - get_malloc_leak_info() used to return one element for each pointer that had the exact same backtrace. The new version returns information for every one of the pointers with same backtrace. It turns out ddms already automatically coalesces these, so the old method simply hid the fact that there where multiple pointers with the same amount of backtrace. - Moved all of the malloc debug specific code into the library. Nothing related to the malloc debug data structures remains in libc. - Removed the calls to the debug malloc cleanup routine. Instead, I added an atexit call with the debug malloc cleanup routine. This gets around most problems related to the timing of doing the cleanup. The new properties and environment variables: libc.debug.malloc.options Set by option name (such as "backtrace"). Setting this to a bad value will cause a usage statement to be printed to the log. libc.debug.malloc.program Same as before. If this is set, then only the program named will be launched with malloc debug enabled. This is not a complete match, but if any part of the property is in the program name, malloc debug is enabled. libc.debug.malloc.env_enabled If set, then malloc debug is only enabled if the running process has the environment variable LIBC_DEBUG_MALLOC_ENABLE set. Bug: 19145921 Change-Id: I7b0e58cc85cc6d4118173fe1f8627a391b64c0d7
2015-11-17 02:30:32 +01:00
}
void* result = Malloc(valloc)(bytes);
if (__predict_false(result == nullptr)) {
warning_log("valloc(%zu) failed: returning null pointer", bytes);
}
return result;
Malloc debug rewrite. The major components of the rewrite: - Completely remove the qemu shared library code. Nobody was using it and it appears to have broken at some point. - Adds the ability to enable/disable different options independently. - Adds a new option that can enable the backtrace on alloc/free when a process gets a specific signal. - Adds a new way to enable malloc debug. If a special property is set, and the process has an environment variable set, then debug malloc will be enabled. This allows something that might be a derivative of app_process to be started with an environment variable being enabled. - get_malloc_leak_info() used to return one element for each pointer that had the exact same backtrace. The new version returns information for every one of the pointers with same backtrace. It turns out ddms already automatically coalesces these, so the old method simply hid the fact that there where multiple pointers with the same amount of backtrace. - Moved all of the malloc debug specific code into the library. Nothing related to the malloc debug data structures remains in libc. - Removed the calls to the debug malloc cleanup routine. Instead, I added an atexit call with the debug malloc cleanup routine. This gets around most problems related to the timing of doing the cleanup. The new properties and environment variables: libc.debug.malloc.options Set by option name (such as "backtrace"). Setting this to a bad value will cause a usage statement to be printed to the log. libc.debug.malloc.program Same as before. If this is set, then only the program named will be launched with malloc debug enabled. This is not a complete match, but if any part of the property is in the program name, malloc debug is enabled. libc.debug.malloc.env_enabled If set, then malloc debug is only enabled if the running process has the environment variable LIBC_DEBUG_MALLOC_ENABLE set. Bug: 19145921 Change-Id: I7b0e58cc85cc6d4118173fe1f8627a391b64c0d7
2015-11-17 02:30:32 +01:00
}
#endif
// =============================================================================
// =============================================================================
// Exported for use by libmemunreachable.
// =============================================================================
// Calls callback for every allocation in the anonymous heap mapping
// [base, base+size). Must be called between malloc_disable and malloc_enable.
extern "C" int malloc_iterate(uintptr_t base, size_t size,
void (*callback)(uintptr_t base, size_t size, void* arg), void* arg) {
auto dispatch_table = GetDispatchTable();
if (__predict_false(dispatch_table != nullptr)) {
return dispatch_table->iterate(base, size, callback, arg);
}
return Malloc(iterate)(base, size, callback, arg);
}
// Disable calls to malloc so malloc_iterate gets a consistent view of
// allocated memory.
extern "C" void malloc_disable() {
auto dispatch_table = GetDispatchTable();
if (__predict_false(dispatch_table != nullptr)) {
return dispatch_table->malloc_disable();
}
return Malloc(malloc_disable)();
}
// Re-enable calls to malloc after a previous call to malloc_disable.
extern "C" void malloc_enable() {
auto dispatch_table = GetDispatchTable();
if (__predict_false(dispatch_table != nullptr)) {
return dispatch_table->malloc_enable();
}
return Malloc(malloc_enable)();
}
#if defined(LIBC_STATIC)
extern "C" ssize_t malloc_backtrace(void*, uintptr_t*, size_t) {
return 0;
}
#endif
#if __has_feature(hwaddress_sanitizer)
// FIXME: implement these in HWASan allocator.
extern "C" int __sanitizer_iterate(uintptr_t base __unused, size_t size __unused,
void (*callback)(uintptr_t base, size_t size, void* arg) __unused,
void* arg __unused) {
return 0;
}
extern "C" void __sanitizer_malloc_disable() {
}
extern "C" void __sanitizer_malloc_enable() {
}
extern "C" int __sanitizer_malloc_info(int, FILE*) {
errno = ENOTSUP;
return -1;
}
#endif
// =============================================================================
// =============================================================================
// Platform-internal mallopt variant.
// =============================================================================
#if defined(LIBC_STATIC)
extern "C" bool android_mallopt(int opcode, void* arg, size_t arg_size) {
if (opcode == M_SET_ALLOCATION_LIMIT_BYTES) {
return LimitEnable(arg, arg_size);
}
errno = ENOTSUP;
return false;
}
#endif
// =============================================================================