The SYNC tagging level enables stack trace collection for allocations and
deallocations, which allows allocation and deallocation stack traces to
appear in tombstones when encountering a tag check fault in synchronous tag
checking mode.
Bug: 135772972
Change-Id: Ibda9f51b29d2c8e2c993fc74425dea7bfa23ab1e
The tag level may now be async, which is now the default. When the tag level
is set to none, memory tagging is disabled in the allocator using the new
API proposed in https://reviews.llvm.org/D70762 .
Bug: 135772972
Change-Id: I847f5822a70913c446ed9ffa13792177bbfc96af
Scudo implemented malloc_info for the primary allocator, so add some
small amount of validation.
Test: Ran the malloc_info tests and verified they pass.
Change-Id: Ib7c609e46cc1ed73fa5c042df92fa9b568880f21
The alloc after fork is a test that should pass, but jemalloc
doesn't right now. Leave the test disabled until the native
allocator can pass this.
Test: Ran the test 1000 times on glibc to verify it passes.
Test: On device, verified it does not run.
Change-Id: I482af4db2fee81c947ac081c7a6f25a2aff80350
This patch refactors heapprofd_malloc to make it easier to reuse the
reserved signal for multiple purposes. We define a new generic signal
handler for profilers, which dispatches to more specific logic based on
the signal's payload (si_value).
The profiler signal handler is installed during libc preinit, after
malloc initialization (so races against synchronous heapprofd
initialization need not be considered). In terms of code organization, I
copied the existing approach with a loosely referenced function in
bionic_globals.h. Do tell if you'd rather a different approach here.
The profileability of a process is quite tied to the malloc
files/interfaces in bionic - in particular, it's set through
android_mallopt. I do not change that, but instead introduce a new
android_mallopt option to be able to query profileability of the
process (which is now used by the new profiler signal handler). As part
of that, gZygoteChildProfileable is moved from heapprofd_malloc to
common (alongside gZygoteChild).
I've removed the masking and reraising of the heapprofd signal when
racing against malloc_limit init. We're ok with taking a simpler
approach and dropping the heapprofd signal in such an unlikely race.
Note: this requires a corresponding change in heapprofd to use sigqueue()
instead of kill(), as the latter leaves the si_value uninitialized(?) on
the receiving side.
Bug: 144281346
Change-Id: I93bb2e82cff5870e5ca499cf86439860aca9dfa5
Bug: 146576216
Test: Ran the test on jemalloc and glibc.
Test: Ran the test on scudo and verified that failed without the align
Test: change.
Change-Id: I31a96f8672c6bce2423210300288a13df1eda42a
When using a FILE object for some malloc debug functions, calling
fprintf will trigger an allocation to be put in the object. The problem
is that these allocations were not allocated by the malloc debug
wrapper and they get freed during the fclose as if they are malloc
debug allocation. In most cases, the code will detect the bad pointer
and leak the memory, but it might also cause a crash.
The fix is to avoid using fprintf so that no allocations are made
in the object that survive and need to be freed in the fclose call.
Change the MallocXmlElem.h to use a file decsriptor not a FILE object.
Add new unit and system tests to detect this case.
Bug: 143742907
Test: Ran unit and system tests.
Test: Ran bionic unit tests.
Change-Id: I524392de822a29483aa5be8f14c680e70033eba2
As the first pass, the malloc_info for scudo doesn't return anything.
This feature is hardly ever used, so this seems fine for the first
revision.
Bug: 137795072
Test: Ran unit tests on a taimen using scudo and a taimen using jemalloc.
Change-Id: I675386ae17ba5505c27bd9da12c60242d795464a
Instead of having platform directories directly include the
private header, create a platform header directory and export it.
Bug: 130763340
Test: Builds.
Change-Id: Ie0f092b3fe077a3de8b90266c0b28bfbc20d0dfa
Merged-In: Ie0f092b3fe077a3de8b90266c0b28bfbc20d0dfa
(cherry picked from commit 8f582ef2f8)
In order for cts to enumerate tests, even tests that are not supported
need to run and be skipped. Make this true for pvalloc/valloc
tests.
Change-Id: I863a179ee6810824a7117f44cc9aa3f86d01eb5b
Test: Ran tests in 32 bit and 64 bit and verified tests are skipped in
Test: 64 bit and run properly in 32 bit.
Also change the names of some of the functions to make it very obvious
that the functions being called are in je code.
Write new test to make sure mallinfo and malloc_info match.
Bug: 131864803
Test: New unit tests pass (along with all other bionic unit tests).
Change-Id: I26eda7e64f57a8c56cc8d70e3ed6a29dcb87f630
Merged-In: I26eda7e64f57a8c56cc8d70e3ed6a29dcb87f630
(cherry picked from commit 125d32cb46)
Introduce an M_SET_ALLOCATION_LIMIT enumerator for android_mallopt(),
which can be used to set an upper bound on the total size of all
allocations made using the memory allocation APIs.
This is useful for programs such as audioextractor and mediaserver
which need to set such a limit as a security mitigation. Currently
these programs are using setrlimit(RLIMIT_AS) which isn't exactly
what these programs want to control. RLIMIT_AS is also problematic
under sanitizers which allocate large amounts of address space as
shadow memory, and is especially problematic under shadow call stack,
which requires 16MB of address space per thread.
Add new unit tests for bionic.
Add new unit tests for malloc debug that verify that when the limit
is enabled, malloc debug still functions for nearly every allocation
function.
Bug: 118642754
Test: Ran bionic-unit-tests/bionic-unit-tests-static.
Test: Ran malloc debug tests and perfetto integration tests.
Change-Id: I735403c4d2c87f00fb2cdef81d00af0af446b2bb
malloc_info needs to be per native allocator, but the code treated it
like a global function that doesn't depend on the native memory allocator.
Update malloc debug to dump the actual pointers that it has been tracking.
Test: bionic-unit-tests pass.
Test: malloc debug tests pass.
Test: malloc hook tests pass.
Change-Id: I3b0d4d748489dd84c16d16933479dc8b8d79013e
Merged-In: I3b0d4d748489dd84c16d16933479dc8b8d79013e
(cherry picked from commit a3656a98b1)
The pieces:
- The malloc common shared by static and dynamic code (malloc_common.cpp).
- The code for shared libraries that includes any dlopen'ing
(malloc_common_dynamic.cpp).
- The implementation of perfetto's heapprofd (malloc_heapprofd.cpp).
This makes it easier to see what's going on in the many different areas.
It should also make it easier to add the allocation capping option.
Other related changes:
- Update the unit tests for android_mallopt. All of the current options
don't work on static binaries, so make sure that is reflected in the test.
- A few names changes to make sure that all code is consistent.
Test: Ran tests (malloc hooks/malloc debug/perfetto/bionic unit tests).
Change-Id: I0893bfbc0f83d82506fac5d1f37cf92fbdef6f59
The test was really only supposed to verify that mallinfo eventually
increase after allocations of certain sizes. Sometimes the mallinfo
returned decreases due to some compaction event, so don't fail in that
case.
Bug: 124060188
Test: Ran the test 2000 times (32 bit and 64 bit). It would fail within about
Test: 200 test iterations before.
Change-Id: Ie019107be163dcf275cedf4d1bc5759278def483
The tests were patched earlier to run with tagging heap allocator.
This change enables hwasan code instrumentation in the tests themselves,
and fixes the issues that arise, mainly in the code that:
* compares addresses of unrelated stack variables
* compares address of a stack variable with stack limits as found in
/proc/self/maps
* writes address of a stack variable to a hardware watchpoint register
etc.
Note that static tests are broken at the moment, like all static
binaries. Dynamic tests pass 100% with this change.
Bug: 114279110, 124007027
Test: SANITIZE_TARGET=hwaddress; run dynamic bionic tests
Change-Id: I68b8df9dd3e30b47734ddc083811a75a7f27deaa
On user builds, heapprofd should only be allowed to profile apps that
are either debuggable, or profileable (according to the manifest). This
change exposes extra zygote-specific knowledge to bionic, and makes the
dedicated signal handler check for the special case of being in a zygote child.
With this & the corresponding framework change, we should now be
handling the 4 combinations of:
{java, native} x {profile_at_runtime, profile_at_startup}.
See internal go/heapprofd-java-trigger for further context.
Test: on-device unit tests (shared & static) on blueline-userdebug.
Test: flashed blueline-userdebug, confirmed that java profiling activates from startup and at runtime.
Bug: 120409382
Change-Id: Ic251afeca4324dc650ac1d4f46976b526eae692a
(cherry picked from commit 998792e2b6)
Merged-In: Ic251afeca4324dc650ac1d4f46976b526eae692a
* HWASan report invalid use of the allocator api (like alignment not
being power of two, or allocation size too large) in a way tests do not
expect.
* Code in .preinit_array runs before HWASan shadow is initialized and
needs to be excluded from instrumentation.
* It looks that mm system calls (mmap/mprotect/etc) will not allow
tagged pointers. In fact, the use of mprotect on malloc()ed memory is
doubtful - one can imagine some kind of speculative load from such
memory, as compiler knows that it is addressable.
Bug: 114279110
Test: bionic-unit-tests with hwasan
Change-Id: I6ba4b46a0d554de77c923ad134cf156ce4ddba1b
Originally a BSD extension, now in glibc too. We've used it internally
for a while.
(cherry-pick of e4b13f7e3ca68edfcc5faedc5e7d4e13c4e8edb9.)
Bug: http://b/112163459
Test: ran tests
Change-Id: I813c3a62b13ddb91ba41e32a5a853d09207ea6bc
Merged-In: I813c3a62b13ddb91ba41e32a5a853d09207ea6bc
Move all tests into stdlib_test.cpp since that's where the definition lives
in bionic.
Add a sweep test and a various size test.
Test: Run new unit tests on glibc and angler.
Change-Id: Ief1301f402bea82ce90240500dd6a01636dbdbae
Add the mallopt function, and only a single option so far.
Bug: 36401135
Test: Built and booted bullhead.
Test: Ran jemalloc unit tests.
Test: Ran bionic unit tests.
Test: Ran a test that allocated and free'd a large piece of memory,
Test: and verified that after changing the parameter, the PSS
Test: sticks around (decay timer set to 1), the PSS is purged (decay
Test: timer set to 0).
Change-Id: I6927929b0c539c1023d34772d9e26bb6a8a45877
In order to enforce this constraint:
The pointer returned if the allocation succeeds shall be suitably
aligned so that it may be assigned to a pointer to any type of object
and then used to access such an object in the space allocated.
Force all allocations on 32 bit systems to have 8 byte alignment,
and all allocations on 64 bit systems to have 16 byte alignment.
Add a test to verify that the allocator returns the correct alignments.
Bug: 26739265
Change-Id: I9af53279617408676b94e4ec6481b3ed7ffafc6a
POSIX lets us return null and set errno, but that would be annoying and
surprising.
Bug: http://b/27101951
Change-Id: I320a8a14884abb806a8d30e3e6cf1ede28b49335
Under some circumstances, doing a calloc will make sure that the memory
returned will be zero up to the size of the requested size. However, if
there is more usable size than the requested size, that extra part
of the allocation will not be zeroed. This change fixes it so that the
entire usable memory is always zeroed.
Change-Id: I8a66d6767c074023c4ba3568bf2705e1886740fc
This allows an easier way to share config parameters between unit tests
and the bionic code.
It also fixes a problem where the 32 bit bionic tests based on glibc, or
the cts list executable did not have the pvalloc,valloc tests.
Change-Id: Ib47942cb8a278252faa7498a6ef23e9578db544f
These were removed from POSIX 2004. Hides the header declarations for all
targets, and hides the symbols for LP64.
Bug: 13935372
Change-Id: Id592f67e9b7051517a05f536e1373b30162e669c
Implement these new functions for all of the debug malloc types.
Fix a number of bugs in the debug malloc functions related to overflow
conditions.
Fix a bug in dlpvalloc due to an overflow condition.
Fix various other bugs in the debug malloc functions.
Add new tests for malloc functions.
Bug: 11225066
Change-Id: Idf50f389603e2157645565bc15cd9365eec2e9dd
To use jemalloc, add MALLOC_IMPL = jemalloc in a board config file
and you get the new version automatically.
Update the pthread_create_key tests since jemalloc uses a few keys.
Add a new test to verify memalign works as expected.
Bug: 981363
Change-Id: I16eb152b291a95bd2499e90492fc6b4bd7053836
- Implemented chk_memalign.
- Fixed a few bugs in leak_memalign.
- Implemented {leak,fill,check,qemu}_malloc_usable_size.
- Make malloc_usable_size update at run time.
- Add malloc_test.cpp as a small set of tests for the
malloc debug routines.
- Fix the qemu routines since it's been broken since it moved to C++.
- Add support for the %u format to the out_vformat in libc_logging.cpp.
This is used by the emulator code.
Tested using the bionic-unit-tests with setprop libc.debug.malloc
set to 1, 5, and 10.
I tested as much as possible on the emulator, but tracing doesn't appear
to be working properly.
Bug: 6143477
Merge change from internal master.
(cherry-picked from commit 3d594c2580)
Change-Id: I4ae00fffba82315a8c283f35893fd554460722fb
