Similar to the musl strstr. This patch also increases test coverage for
memmem, again similar to the strstr tests.
Test: treehugger
Change-Id: I7f4a2ab93a610cb692994d06d2512976e657ae9f
Even with formatting off, clang still tries to rearrange the include
files or the using statements, so disable that too.
Test: Verified that the include directories are not rearranged.
Change-Id: I991a1b2bfa94a8202c5a486664658d654f1c7811
Use the .clang-format-2 found in system/core instead of this which is
not actually being used.
Also, enable clang-format running by default.
All upstream directories are marked as ignoring formatting so that
their source files are not modified.
Test: NA
Change-Id: Icee6030f373fa5f072df162f97e6f34320e3d89a
As it turns out, our "generic" arm64 implementations of certain string.h
functions are not actually generic, since they will eagerly read memory
possibly outside of the bounds of an MTE granule, which may lead to a segfault
on MTE-enabled hardware. Therefore, move the implementations into a "default"
directory and use ifuncs to select between them and a new set of "mte"
implementations, conditional on whether the hardware and kernel support MTE.
The MTE implementations are currently naive implementations written in C
but will later be replaced with a set of optimized assembly implementations.
Bug: 135772972
Change-Id: Ife37c4e0e6fd60ff20a34594cc09c541af4d1dd7
The tables in the BSD tolower/toupper are slower for ASCII than just
doing the bit twiddling.
We can't actually remove the tables on LP32, so move them into the
"cruft" we keep around for backwards compatibility (but remove them for
LP64 where they were never exposed).
I noticed that the new bit-twiddling tolower(3) was performing better
on arm64 than toupper(3). The 0xdf constant was requiring an extra MOV,
and there isn't a BIC that takes an immediate value. Since we've already
done the comparison to check that we're in the right range (where the
bit is always set), though, we can EOR 0x20 to get the same result as
the missing BIC 0x20 in just one instruction.
I've applied that same optimization to towupper(3) too.
Before:
BM_ctype_tolower_n 3.30 ns 3.30 ns 212353035
BM_ctype_tolower_y 3.31 ns 3.30 ns 211234204
BM_ctype_toupper_n 3.30 ns 3.29 ns 214161246
BM_ctype_toupper_y 3.29 ns 3.28 ns 207643473
BM_wctype_towupper_ascii_n 3.53 ns 3.53 ns 195944444
BM_wctype_towupper_ascii_y 3.48 ns 3.48 ns 199233248
After:
BM_ctype_tolower_n 2.93 ns 2.92 ns 242373703
BM_ctype_tolower_y 2.88 ns 2.87 ns 245365309
BM_ctype_toupper_n 2.93 ns 2.93 ns 243049353
BM_ctype_toupper_y 2.89 ns 2.89 ns 245072521
BM_wctype_towupper_ascii_n 3.34 ns 3.33 ns 212951912
BM_wctype_towupper_ascii_y 3.29 ns 3.29 ns 214651254
(Why do both the "y" and "n" variants speed up with the EOR
change? Because the compiler transforms the code so that we
unconditionally do the bit twiddling and then use CSEL to decide whether
or not to actually use the result.)
We also save 1028 bytes of data in the LP64 libc.so.
Test: ran the bionic benchmarks and tests
Change-Id: I7829339f8cb89a58efe539c2a01c51807413aa2d
NetBSD seems to be the least well maintained of our three BSD upstreams,
and it's already the one we use the least. Let's push a little further
in that direction...
Test: new smoke tests
Change-Id: Idfebd11794445fe14cbfa07177a7392a7b36a5e4
Originally a BSD extension, now in glibc too. We've used it internally
for a while.
(cherry-pick of e4b13f7e3ca68edfcc5faedc5e7d4e13c4e8edb9.)
Bug: http://b/112163459
Test: ran tests
Change-Id: I813c3a62b13ddb91ba41e32a5a853d09207ea6bc
Merged-In: I813c3a62b13ddb91ba41e32a5a853d09207ea6bc
We've copied & pasted these to too many places. And if we're going to
have another go at upstreaming these, that's probably yet another reason
to have the *values* in just one place. (Even if upstream wants different
names, we'll likely keep the legacy names around for a while for source
compatibility.)
Bug: http://b/111903542
Test: ran tests
Change-Id: I8ccc557453d69530e5b74f865cbe0b458c84e3ba
pclose(3) is now an alias for fclose(3). We could add a FORTIFY check
that you use pclose(3) if and only if you used popen(3), but there seems
little value to that when we can just do the right thing.
This patch also adds the missing locking to _fwalk --- we need to lock
both the global list of FILE*s and also each FILE* we touch. POSIX says
that "The popen() function shall ensure that any streams from previous
popen() calls that remain open in the parent process are closed in the
new child process", which we implement via _fwalk(fclose) in the child,
but we might want to just make *all* popen(3) file descriptors O_CLOEXEC
in all cases.
Ignore fewer errors in popen(3) failure cases.
Improve popen(3) test coverage.
Bug: http://b/72470344
Test: ran tests
Change-Id: Ic937594bf28ec88b375f7e5825b9c05f500af438
We saw crashes from pthread_exit+debuggerd on LP32
(https://issuetracker.google.com/72291624), and it seems like the
equivalent problem should exist with system(3). I fixed posix_spawn(3)
as part of that bug, so the easiest fix is probably to reuse that.
Bug: http://b/72470344
Test: ran tests
Change-Id: I05f838706f2b4a14ac3ee21292833e6c8579b0d4
Now that we have a clang that supports transparent overloads, we can
kill all of this cruft, and restore our upstream sources to their
untouched glory. Woohoo!
Bug: 12231437
Test: Built aosp_marlin; no obvious patch-related aosp_mips issues.
Change-Id: I520a19d014f12137f80e43f973dccd6711c571cd
This is also slightly faster for the no VDSO case (56ns vs 66ns).
Bug: N/A
Test: ran tests, benchmarks
Change-Id: I2b0edd06ee6942eb57c32678279278a53ca5ee9b
There are no meaningful changes here, just a minimal conversion to two
C++ templates to make further changes easier.
Bug: N/A
Test: ran tests, benchmarks
Change-Id: I958fbf17a85f19dd8f17bfb4bbb9314d220daa3b
Also simplify trivial one-liners like perror/puts/fputs, and clean up
fread/fwrite slightly.
Fix perror to match POSIX.
Add basic perror and *_unlocked tests.
Bug: N/A
Test: ran tests
Change-Id: I63f83c8e0c15c3c4096509d17421ac331b6fc23d
iOS 10 has <sys/random.h> with getentropy, glibc >= 2.25 has
<sys/random.h> with getentropy and getrandom. (glibc also pollutes
<unistd.h>, but that seems like a bad idea.)
Also, all supported devices now have kernels with the getrandom system
call.
We've had these available internally for a while, but it seems like the
time is ripe to expose them.
Bug: http://b/67014255
Test: ran tests
Change-Id: I76dde1e3a2d0bc82777eea437ac193f96964f138
(Where errno is relevant.)
Also consistently use -1 as the fd for anonymous mmaps. (It doesn't matter,
but it's more common, and potentially more intention-revealing.)
Bug: http://b/65608572
Test: ran tests
Change-Id: Ie9a207632d8242f42086ba3ca862519014c3c102
Library calls like system() and popen() invoke the shell executable
pointed to by '_PATH_BSHELL' in order to run the command passed into the
function. The _PATH_BSHELL points to /system/bin/sh by default and thus
breaks any vendor process trying to use system() / popen(), as they are
denied access to system shell by selinux.
This CL make necessary changes, so the implmentations of system() and popen()
can use the appropriate shell (e.g. /vendor/bin/sh for processes running
out of /vendor partition). Also, changes the implementation of system()
and popen().
Bug: 64832610
Test: Manual, Using a test program running from /system/bin and
/vendor/bin to ensure correct shell is being used.
Change-Id: Ie7168d69decb1ae98284446ae7db34dec930dc33
Merged-In: Ie7168d69decb1ae98284446ae7db34dec930dc33
Signed-off-by: Sandeep Patil <sspatil@google.com>
(cherry picked from commit aa3e32422c)
Almost all of our w* functions come from FreeBSD already. The one downside is
that we can't take all our w* functions from FreeBSD because FreeBSD handles
locales very differently from us.
Bug: N/A
Test: ran tests
Change-Id: I177b4332499992babd5d5afe5b3f469f8c4345a5
Upstream's killpg is diverging further from glibc behavior, so let's just fork.
Bug: N/A
Test: ran tests
Change-Id: I70a3543018bc0a5c0bbf019ac527043b90568fda
__isthreaded is annoying for ARC++ and useless for everyone. Just hard-code
the value in ndk_cruft for LP32 and be done with it.
Bug: N/A
Test: builds
Change-Id: I08f11a404bbec55ed57cb1e18b5116163c7d7d13
This library is used by a number of different libraries in the system.
Make it easy for platform libraries to use this library and create
an actual exported include file.
Change the names of the functions to reflect the new name of the library.
Run clang_format on the async_safe_log.cpp file since the formatting is
all over the place.
Bug: 31919199
Test: Compiled for angler/bullhead, and booted.
Test: Ran bionic unit tests.
Test: Ran the malloc debug tests.
Change-Id: I8071bf690c17b0ea3bc8dc5749cdd5b6ad58478a
This patch adds clang-style FORTIFY to Bionic. For more information on
FORTIFY, please see https://goo.gl/8HS2dW . This implementation works
for versions of clang that don't support diagnose_if, so please see the
"without diagnose_if" sections. We plan to swap to a diagnose_if-based
FORTIFY later this year (since it doesn't really add any features; it
just simplifies the implementation a lot, and it gives us much prettier
diagnostics)
Bug: 32073964
Test: Builds on angler, bullhead, marlin, sailfish. Bionic CTS tests
pass on Angler and Bullhead.
Change-Id: I607aecbeee81529709b1eee7bef5b0836151eb2b
POSIX locale only, as usual.
The GNU YESSTR and NOSTR extensions return the empty string in the C locale,
so I haven't bothered supporting them.
Bug: http://b/1401872
Test: bionic tests
Change-Id: I6846839e4f9f1812344ed5dce0b93f83c0c20eb3
The parsefloat routines -- which let us pass NaNs and infinities on to
strto(f|d|ld) -- come from NetBSD.
Also fix LP64's strtold to return a NaN, and fix all the architectures
to return quiet NaNs.
Also fix wcstof/wcstod/wcstold to use parsefloat so they support hex
floats.
Lots of new tests.
Bug: http://b/31101647
Change-Id: Id7d46ac2d8acb8770b5e8c445e87cfabfde6f111