This change removes the kuser_helper note from building automatically
with any binary but leaves the note.
Also fixes a typo in the note.
Original patch adding the note:
Ib8366e2a0810092b71381d57dee4bdaa56369a24
Bug: 34815073
Test: Manual - Note is no longer added to binaries
Change-Id: Ieb81f9d9127d1f8a522434a31c696d743238e2a5
No-one is directly upgrading from pre-K to O...
Also move more implementation details out of the header file.
Bug: http://b/33926793
Test: boots
Change-Id: I7a0936acbb1cea8a3b2cd6797ec53ba7e4a050f3
A kernel change is going in for 64bit arm to disable kuser_helper vector
pages for 32bit processes. This change adds a special elf note to
all arm32 binaries built with bionic. This note tells the kernel to
load the kuser_helper vector page for the process.
Bug: 33689037
Test: Manual - Phone boots, 32bit binaries have the notes, 64bit
binaries do not.
Change-Id: Ib8366e2a0810092b71381d57dee4bdaa56369a24
android_filesystem_config.h comes from a directory outside bionic/libc
so it can't be referenced directly, add it as a source file through
a filegroup module.
Bug: 34283327
Test: builds
Test: libc rebuilds after touch system/core/include/private/android_filesystem_config.h
Change-Id: I90f6b7b25b70842b8619d558074449f13e6e6b03
Another release, another attempt to fix this bug.
This change affects pthread_detach, pthread_getcpuclockid,
pthread_getschedparam/pthread_setschedparam, pthread_join, and pthread_kill:
instead of returning ESRCH when passed an invalid pthread_t, they'll now SEGV.
Note that this doesn't change behavior as much as you might think: the old
lookup only held the global thread list lock for the duration of the lookup,
so there was still a race between that and the dereference in the caller,
given that callers actually need the tid to pass to some syscall or other,
and sometimes update fields in the pthread_internal_t struct too.
We can't check thread->tid against 0 to see whether a pthread_t is still
valid because a dead thread gets its thread struct unmapped along with its
stack, so the dereference isn't safe.
Taking the affected functions one by one:
* pthread_getcpuclockid and pthread_getschedparam/pthread_setschedparam
should be fine. Unsafe calls to those seem highly unlikely.
* Unsafe pthread_detach callers probably want to switch to
pthread_attr_setdetachstate instead, or using pthread_detach(pthread_self())
from the new thread's start routine rather than doing the detach in the
parent.
* pthread_join calls should be safe anyway, because a joinable thread won't
actually exit and unmap until it's joined. If you're joining an
unjoinable thread, the fix is to stop marking it detached. If you're
joining an already-joined thread, you need to rethink your design.
* Unsafe pthread_kill calls aren't portably fixable. (And are obviously
inherently non-portable as-is.) The best alternative on Android is to
use pthread_gettid_np at some point that you know the thread to be alive,
and then call kill/tgkill directly. That's still not completely safe
because if you're too late, the tid may have been reused, but then your
code is inherently unsafe anyway.
If we find too much code is still broken, we can come back and disable
the global thread list lookups for anything targeting >= O and then have
another go at really removing this in P...
Bug: http://b/19636317
Test: N6P boots, bionic tests pass
Change-Id: Ia92641212f509344b99ee2a9bfab5383147fcba6
This is to prevent situations when libgcc.a calls into incorrect
implementation of dl_iterate_phdr.
Bug: http://b/27106625
Test: build && run bionic-unit-tests --getst_filter=dl*:Dl*
Change-Id: I4cba8c4a156f91f17ba3d95c39cb80f9b70c9d8f
Generate the android_ids array and include into the
build.
Test: The bionic is built and that core AIDs work as
expected with commands like chown, mkdir and init services
and builtins.
Bug: 27999086
Change-Id: Ib575bf85326c91801c5674db475dcb9cf44c00dc
Signed-off-by: William Roberts <william.c.roberts@intel.com>
Some PoS internal system can't cope with more than 4 stack frames,
so the fact that our abort(3) implementation takes 4 frames by itself
makes it useless.
Re-reading POSIX, it only says "behaves as if", so the previous
implementation chain wasn't mandatory and we can just go straight to
calling tgkill...
Before:
#00 pc 0000000000069be4 /system/lib64/libc.so (tgkill+8)
#01 pc 0000000000066d50 /system/lib64/libc.so (pthread_kill+64)
#02 pc 0000000000028110 /system/lib64/libc.so (raise+24)
#03 pc 000000000001d4ec /system/lib64/libc.so (abort+52)
After:
#00 pc 0000000000069bc8 /system/lib64/libc.so (tgkill+8)
#01 pc 000000000001d4c8 /system/lib64/libc.so (abort+80)
#02 pc 0000000000001494 /system/xbin/crasher64 (_ZL9do_actionPKc+872)
#03 pc 00000000000010e0 /system/xbin/crasher64 (main+88)
This is less useful on 32-bit ARM because there there's an extra trampoline
from an assembler abort(3) implementation, so you'll still only get one
meaningful stack frame. But every other architecture will now get two!
But wait!
It turns out that the assembler hack isn't needed any more. Here we are
unwinding just fine all the way through the 32-bit ARM crasher:
Before (with direct call to tgkill but still using the assembler):
#00 pc 00049e7c /system/lib/libc.so (tgkill+12)
#01 pc 00019c6f /system/lib/libc.so (__libc_android_abort+50)
#02 pc 000181f8 /system/lib/libc.so (abort+4)
#03 pc 00001025 /system/xbin/crasher (_ZL9do_actionPKc+656)
#04 pc 00017721 /system/lib/libc.so (__libc_init+48)
#05 pc 00000b38 /system/xbin/crasher (_start+96)
After:
#00 pc 00049e6c /system/lib/libc.so (tgkill+12)
#01 pc 00019c5f /system/lib/libc.so (abort+50)
#02 pc 00001025 /system/xbin/crasher (_ZL9do_actionPKc+656)
#03 pc 00017721 /system/lib/libc.so (__libc_init+48)
#04 pc 00000b38 /system/xbin/crasher (_start+96)
(As you can see, the fact that we see __libc_init rather than main was true
with the assembler stub too, so that's not a regression even if it does seem
odd...)
Bug: N/A
Test: ran crasher64
Change-Id: I9dd5b214c495604c8b502c7ec0de3631080d8c29
Disables debuggerd integration unless building for android.
Bug: 31559095
Test: Diff out/soong/build.ninja before/after, only change is moving
linker's libdebuggerd_client static lib to the beginning of the
list.
Test: lunch aosp_arm64-eng; mmma -j bionic
Change-Id: I62e725f7a9b98b7fe31637d0a835fd5846b0aff0
Pretty useless, because the POSIX APIs are useless for actually
internationalization, but it lets us put this to bed for good.
Bug: http://b/18492914
Test: bionic tests
Change-Id: I4dd0aff66c44b5547039be3ffea806c865b9014a
Test: Changed angler target to use cortex-a7 and I compiled.
Test: Booted this version on angler and ran bionic-unit-tests.
Change-Id: Ice7f6ea38a2569582161a8e659d7877918c1a45a
* Bionic benchmarks results at the bottom
* This is a squash of the following commits:
libc: ARM64: optimize memset.
This is an optimized memset for AArch64. Memset is split into 4 main
cases: small sets of up to 16 bytes, medium of 16..96 bytes which are
fully unrolled. Large memsets of more than 96 bytes align the
destination and use an unrolled loop processing 64 bytes per
iteration. Memsets of zero of more than 256 use the dc zva
instruction, and there are faster versions for the common ZVA sizes 64
or 128. STP of Q registers is used to reduce codesize without loss of
performance.
Change-Id: I0c5b5ec5ab8a1fd0f23eee8fbacada0be08e841f
libc: ARM64: improve performance in strlen
Change-Id: Ic20f93a0052a49bd76cd6795f51e8606ccfbf11c
libc: ARM64: Optimize memcpy.
This is an optimized memcpy for AArch64. Copies are split into 3 main
cases: small copies of up to 16 bytes, medium copies of 17..96 bytes
which are fully unrolled. Large copies of more than 96 bytes align
the destination and use an unrolled loop processing 64 bytes per
iteration. In order to share code with memmove, small and medium
copies read all data before writing, allowing any kind of overlap. On
a random copy test memcpy is 40.8% faster on A57 and 28.4% on A53.
Change-Id: Ibb9483e45bbc0e8ca3d5ce98a31c55dfd8a5ac28
libc: AArch64: Tune memcpy
* Further tuning for performance.
Change-Id: Id08eaab885f9743fa7575077924a947c1b88e4ff
libc: ARM64: optimize memmove for Cortex-A53
* Sadly does not work on Denver or Kryo, so can't go to generic
This is an optimized memmove for AArch64. All copies of up to 96
bytes and all backward copies are done by the new memcpy. The only
remaining case is large forward copies which are done in the same way
as the memcpy loop, but copying from the end rather than the start.
Tested on the Nextbit Robin with MSM8992 (Snapdragon 808):
Before
BM_string_memcmp/8 1000k 27 0.286 GiB/s
BM_string_memcmp/64 50M 20 3.053 GiB/s
BM_string_memcmp/512 20M 126 4.060 GiB/s
BM_string_memcmp/1024 10M 234 4.372 GiB/s
BM_string_memcmp/8Ki 1000k 1726 4.745 GiB/s
BM_string_memcmp/16Ki 500k 3711 4.415 GiB/s
BM_string_memcmp/32Ki 200k 8276 3.959 GiB/s
BM_string_memcmp/64Ki 100k 16351 4.008 GiB/s
BM_string_memcpy/8 1000k 13 0.612 GiB/s
BM_string_memcpy/64 1000k 8 7.187 GiB/s
BM_string_memcpy/512 50M 38 13.311 GiB/s
BM_string_memcpy/1024 20M 86 11.858 GiB/s
BM_string_memcpy/8Ki 5M 620 13.203 GiB/s
BM_string_memcpy/16Ki 1000k 1265 12.950 GiB/s
BM_string_memcpy/32Ki 500k 2977 11.004 GiB/s
BM_string_memcpy/64Ki 500k 8003 8.188 GiB/s
BM_string_memmove/8 1000k 11 0.684 GiB/s
BM_string_memmove/64 1000k 16 3.855 GiB/s
BM_string_memmove/512 50M 57 8.915 GiB/s
BM_string_memmove/1024 20M 117 8.720 GiB/s
BM_string_memmove/8Ki 2M 853 9.594 GiB/s
BM_string_memmove/16Ki 1000k 1731 9.462 GiB/s
BM_string_memmove/32Ki 500k 3566 9.189 GiB/s
BM_string_memmove/64Ki 500k 7708 8.501 GiB/s
BM_string_memset/8 1000k 16 0.487 GiB/s
BM_string_memset/64 1000k 16 3.995 GiB/s
BM_string_memset/512 50M 37 13.489 GiB/s
BM_string_memset/1024 50M 58 17.405 GiB/s
BM_string_memset/8Ki 5M 451 18.160 GiB/s
BM_string_memset/16Ki 2M 883 18.554 GiB/s
BM_string_memset/32Ki 1000k 2181 15.022 GiB/s
BM_string_memset/64Ki 500k 4563 14.362 GiB/s
BM_string_strlen/8 1000k 8 0.965 GiB/s
BM_string_strlen/64 1000k 16 3.855 GiB/s
BM_string_strlen/512 20M 92 5.540 GiB/s
BM_string_strlen/1024 10M 167 6.111 GiB/s
BM_string_strlen/8Ki 1000k 1237 6.620 GiB/s
BM_string_strlen/16Ki 1000k 2765 5.923 GiB/s
BM_string_strlen/32Ki 500k 6135 5.341 GiB/s
BM_string_strlen/64Ki 200k 13168 4.977 GiB/s
After
BM_string_memcmp/8 1000k 21 0.369 GiB/s
BM_string_memcmp/64 1000k 28 2.272 GiB/s
BM_string_memcmp/512 20M 128 3.983 GiB/s
BM_string_memcmp/1024 10M 234 4.375 GiB/s
BM_string_memcmp/8Ki 1000k 1732 4.728 GiB/s
BM_string_memcmp/16Ki 500k 3485 4.701 GiB/s
BM_string_memcmp/32Ki 500k 7031 4.660 GiB/s
BM_string_memcmp/64Ki 200k 14296 4.584 GiB/s
BM_string_memcpy/8 1000k 5 1.458 GiB/s
BM_string_memcpy/64 1000k 7 8.952 GiB/s
BM_string_memcpy/512 50M 36 13.907 GiB/s
BM_string_memcpy/1024 20M 80 12.750 GiB/s
BM_string_memcpy/8Ki 5M 572 14.307 GiB/s
BM_string_memcpy/16Ki 1000k 1165 14.053 GiB/s
BM_string_memcpy/32Ki 500k 3141 10.430 GiB/s
BM_string_memcpy/64Ki 500k 7008 9.351 GiB/s
BM_string_memmove/8 50M 7 1.074 GiB/s
BM_string_memmove/64 1000k 9 6.593 GiB/s
BM_string_memmove/512 50M 37 13.502 GiB/s
BM_string_memmove/1024 20M 80 12.656 GiB/s
BM_string_memmove/8Ki 5M 573 14.281 GiB/s
BM_string_memmove/16Ki 1000k 1168 14.018 GiB/s
BM_string_memmove/32Ki 1000k 2825 11.599 GiB/s
BM_string_memmove/64Ki 500k 6548 10.008 GiB/s
BM_string_memset/8 1000k 7 1.038 GiB/s
BM_string_memset/64 1000k 8 7.151 GiB/s
BM_string_memset/512 1000k 29 17.272 GiB/s
BM_string_memset/1024 50M 53 18.969 GiB/s
BM_string_memset/8Ki 5M 424 19.300 GiB/s
BM_string_memset/16Ki 2M 846 19.350 GiB/s
BM_string_memset/32Ki 1000k 2028 16.156 GiB/s
BM_string_memset/64Ki 500k 4514 14.517 GiB/s
BM_string_strlen/8 1000k 7 1.120 GiB/s
BM_string_strlen/64 1000k 16 3.918 GiB/s
BM_string_strlen/512 50M 64 7.894 GiB/s
BM_string_strlen/1024 20M 104 9.815 GiB/s
BM_string_strlen/8Ki 5M 664 12.337 GiB/s
BM_string_strlen/16Ki 1000k 1291 12.682 GiB/s
BM_string_strlen/32Ki 1000k 2940 11.143 GiB/s
BM_string_strlen/64Ki 500k 6440 10.175 GiB/s
Change-Id: I635bd2798a755256f748b2af19b1a56fb85a40c6
POSIX locale only, as usual.
The GNU YESSTR and NOSTR extensions return the empty string in the C locale,
so I haven't bothered supporting them.
Bug: http://b/1401872
Test: bionic tests
Change-Id: I6846839e4f9f1812344ed5dce0b93f83c0c20eb3
Ic9125cc1bc4c9ba9eb20d030de72e3ce1fb86fa6 disabled relocation packing
in libc.so, but the flag was dropped when we switched to Android.bp
in Ib0ba2d28bff88483b505426ba61606da314e03ab.
Bug: 20645321
Bug: 20655855
Bug: 32750616
Test: builds
Test: inspect out/build-aosp_angler.ninja
Test: run app that crashes with packed libc.so
Change-Id: Ib0630f2e342afa543bb88303fec8f9695ac583e9
Strings like cflags in Android.bp files are parsed by blueprint,
written to build.ninja files, parsed by ninja, and then passed to
/bin/sh -c. This had resulted in a combination of blueprint
(\"), ninja ($$), and shell (\$) escaping being necessary.
Soong has been updated to automatically handle ninja and shell
escaping, remove extra escaping from Android.bp files.
Bug: 31221587
Test: m -j
Change-Id: Ib58a51dee8d22296b69ec21768ba6a49dd60e980
The parsefloat routines -- which let us pass NaNs and infinities on to
strto(f|d|ld) -- come from NetBSD.
Also fix LP64's strtold to return a NaN, and fix all the architectures
to return quiet NaNs.
Also fix wcstof/wcstod/wcstold to use parsefloat so they support hex
floats.
Lots of new tests.
Bug: http://b/31101647
Change-Id: Id7d46ac2d8acb8770b5e8c445e87cfabfde6f111
When arc4random can get entropy (which is true for basically everyone
but init on kernels that don't support getrandom), use it instead of
AT_RANDOM.
Bug: http://b/29622562
Change-Id: I6932803af2c477e65562ff531bd959f199fad1df
Also fix <sys/ipc.h>.
Not useful except to systems/bringup folks for testing. Trivial tests
added, and double-checked under strace to see that things look right.
x86 -- which works differently to everything else -- tested on the host.
Bug: http://b/27952303
Change-Id: I328534e994ae9e90755f545478fba03038c0bb94
exec and realpath both have PATH_MAX buffers (which is a bug in its own
right, since PATH_MAX isn't a real limit). The printf/scanf implementation
has a few large functions, and the DNS implementation is a complete 1970s
C nightmare.
Bug: http://b/30032507
Change-Id: I4b9daa552123c16bbe84f0632b2b32eba17a9dbd
Hiding our legacy cruft seemed like a good idea, but in practice it will only
mean worse interoperability.
Plus we got it wrong, as the recent `putw` example showed.
Change-Id: I167c7168eff133889028089c22a7a0dfb8d6d0cf
