Provide a means to include device-specific recovery modules that need to
be built (i.e. not pre-built). A list of recovery modules can be
specified by a device with:
TARGET_RECOVERY_DEVICE_MODULES := rec_mod_one rec_mod_two
Change-Id: Ibd19a71318863461d472471a4f7cfddfb1b9ae0d
It's installed to recovery, so it should use recovery variants.
Bug: 192312249
Test: boot and enter recovery mode
Change-Id: I99eafa756ba071e37c7ee60a8da210385378710b
The current fastbootd only supports USB protocol. But some Android TV
devices are built without USB port. The fastbootd cannot be used on
those ATV devices due to it. aosp/1295566 enables fastbootd over
ethernet.
This change adds an EthernetDevice to manage ethernet connection and set
fastbootd protcol property fastbootd.protocol to enable fastbootd over
ethernet in recovery mode. It uses IPv6 link-local address to not expose
the devices out of the network segment. The devices who want to use this
EthernetDevice should add
“TARGET_RECOVERY_UI_LIB := librecovery_ui_ethernet” into BoardConfig.mk.
BUG: 152544169
Test: Enter and exit fastboot mode and check eth0 IPv6 link-local address
on screen UI.
Change-Id: I73fe44be3790bdba5a6059fbba3f7264b21eed99
Remount will instead use overlayfs. If the device is not configured
to use overlayfs or if the device does not support dynamic partitions
but has chosed to setup an ext4-dedupe filesystem, e2fsck_static must
then be included in recovery.
Bug: 122115286
Test: fastboot flashall
Change-Id: I931282dbc67ff4ef53291bcbc5a078b500e5e807
It also reduces the space cost for devices using f2fs (e.g. crosshatch).
/sbin/mkfs.f2fs 722560 => /system/bin/make_f2fs 49568
/sbin/sload.f2fs 1182456 => /system/bin/sload_f2fs 150032
Test: Build and boot recovery on crosshatch. Factory reset.
Test: Install a non-A/B OTA package that formats a f2fs partition.
Change-Id: Ibe70c8d91a1d07e1c78ff9eac19b1f7955800161
The recovery-persist used to look for the related recovery logs in
persist storage, and copy them under /data/misc/recovery during the
normal boot process.
As we also want to find out the sideload information from last_install,
it makes more sense to move the parse & report of non-a/b metrics to
recovery-persist. Thus we can avoid the race condition of the file
system between the native code and RecoverySystem.
Bug: 114278989
Test: unit test pass, check the event buffer for metrics report
Change-Id: I32d7b2b831bc74a61a70af9a2f0b8a7e9b3e36ee
Also separate libupdater_defaults out to be shareable.
It turns out the `data` property in `cc_test` doesn't follow symlinks as
LOCAL_TEST_DATA does in Android.mk. This CL creates a filegroup in
top-level Android.bp in order to pick up the testdata for ResourcesTest.
Test: `mmma -j bootable/recovery` with aosp_marlin-userdebug
Test: Run recovery_{unit,component,manual}_test on marlin.
Test: Run recovery_host_test.
Change-Id: I4532ab25aeb83c0b0baa8051d5fe34ba7b910a35
Test: mmma -j bootable/recovery
Test: Run recovery_unit_test and recovery_component_test on marlin.
Change-Id: I2617b87d13c585addf0ed2fbae8c3ce443ea7200
Fixes: 110380063
Test: `mmma -j bootable/recovery` with aosp_taimen-userdebug
Test: Build and boot into recovery on taimen. Check the basic
functionalities (`Apply update from ADB`, `View recovery logs`,
`Run graphics test`).
Test: Run recovery_unit_test and recovery_component_test on marlin.
Test: Modify `recovery.cpp` locally to trigger the call to
is_battery_ok(). Check that the battery info is reported
correctly.
Test: `build/soong/build_test.bash --dist`
Change-Id: I391eb201d57c760e457ba2bf2410ceb72596795c
Bug: 110380063
Test: `m -j installclean && mmma -j bootable/recovery` with
aosp_taimen-userdebug
Test: Build (`m -j bootimage`) and boot into recovery. Check that
`adb sideload` and `Run graphics test` both work.
Test: Run recovery_unit_test and recovery_component_test on marlin.
Change-Id: Ie6ed0e7cafa352d5faff9d1b6ccef724a0415e65
This reverts commit 4fd4f89591.
The reverted CL has a side effect that unintentionally installs
a copy of libminadbd_services.so to the system image. This breaks the
check with `build/soong/build_test.bash --dist` which detects and
prevents vendor modules from installing files to the system image.
Prior to fully converting `recovery` to be built with Soong, we have to
statically link recovery-specific modules into `recovery`.
Bug: 110380063
Test: `m -j bootimage` with aosp_marlin-userdebug
Test: Run minadbd_test on marlin.
Test: Boot into recovery and verify that sideloading still works.
Test: `build/soong/build_test.bash --dist`
Change-Id: I290d55c82e17aa60a5afdf2ff7f896afc4dae8b3
The former `minadbd` module is now built as a shared library
(`libminadbd_services.so`) that serves sideloading under recovery, with
a dynamic dependency on `libadbd.so`.
This allows sharing and reusing libadbd code on device (both of `adbd`
and `recovery` now uses `libadbd.so`). As a result, it reduces the size
of `recovery` binary from 1407360-byte to (1272880 + 33032)-byte
(aosp_marlin-userdebug).
Bug: 78793464
Test: `m -j bootimage` with aosp_marlin-userdebug
Test: Run minadbd_test on marlin.
Test: Boot into recovery and verify that sideloading still works.
Change-Id: I6c2bc3d351d5af71220a9b9f956c8c039e52c781
We used to statically link the device-specific recovery UI extension
(`TARGET_RECOVERY_UI_LIB`) into `recovery`. Such a logic can't be easily
migrated to Soong, as modules specified by `TARGET_RECOVERY_UI_LIB` may
not be built with Soong.
Instead of porting all the device-specific codes over, this CL builds
and installs the UI lib as a shared library with Android.mk. `recovery`
dlopen(3)'s and dlsym(3)'s `make_device` to invoke the device-specific
UI lib on start.
Note that in order to make dlopen(3) actually working, we have to switch
`recovery` to be dynamically linked (we will make the move later
anyway).
Bug: 110380063
Test: Build and boot into marlin recovery image. Check that
device-specific recovery UI is successfully loaded.
Change-Id: Ia9861c7559a95f3f50676534540c0cb87cae4574
Note that although libminui says "shared_libs" in Android.bp file,
`recovery` binary will still statically link the libs, until we drop the
`LOCAL_FORCE_STATIC_EXECUTABLE := true` flag from `recovery` module.
Bug: 110380063
Test: `mmma -j bootable/recovery` with aosp_taimen-userdebug
Test: Boot into recovery and `Run graphics test`.
Change-Id: I48785d161dfe52eb01667e938d9c3f0a497b61a2
The matching change to build system now writes these values as build
properties for recovery image. This allows us dropping the dependency on
Android.mk (as well as having more flexibility to do UI customization).
Also rename a few constant names, as the naming doesn't fully follow the
style guide (which reads "whose value is fixed for the duration of the
program").
Bug: 110380063
Test: Build and flash recovery image on taimen, which uses custom margin
height. Check the UI and choose `Run graphics test`.
Change-Id: I2c50326123639cb36022f51b62cdeed925d77ba7
Executables should be in /system/bin
rather than sbin.
Bug: 78793464
Test: boot into recovery, try adb sideload
Change-Id: I194589119a099d29e56b0648f0906a5ae2aa6770
The two utilities are now converted to dynamic executables as shared
libraries are supported in recovery mode.
As part of the conversion, their location has moved from /sbin to
/system/bin. Reflect the change in the program 'recovery'
Bug: 79146551
Test: adb reboot recovery, and select 'Wipe data/factory reset'. The
data partition is formatted and there is no selinux denial.
Change-Id: Ie7cfc4c50ab1e6767e4a5170533ccf826ec7d7f3
This shortens the gap between A/B and non-A/B builds, by replacing the
dependency on build-time flag with runtime detection instead. It also
allows building and testing both paths regardless of the target OTA
type.
The size increase to /sbin/recovery looks negligible (< 0.01%).
- marlin: increased from 2084928 to 2085024;
- angler: increased from 2084776 to 2084896.
Test: Run recovery_component_test on angler and marlin.
Test: Sideload an A/B OTA package on marlin.
Test: Sideload a non-A/B OTA package on angler.
Change-Id: I1d927d1ede9713fb42f73b4fe324aa5705ee6f99
Allow "adb remount" on deduplicated filesystems to reboot into recovery
and run e2fsck to undo deduplication. The e2fsck binary is copied from
the system partition into tmpfs, and the system partition is unmounted
so e2fsck can run safely.
Bug: 64109868
Test: recovery with --fsck_unshare_blocks; adb remount
Change-Id: I7558749b018b58f3c4339e51a95831dbd5be1ae3
Move most source files into librecovery so they become testable. Only
recovery_main.cpp and logging.cpp are built into recovery module, as
they perform one-time setup (e.g. setting up logger).
Test: `mmma -j bootable/recovery` with
aosp_{angler,bullhead,fugu,dragon,marlin}-userdebug
Test: recovery_host_test; recovery_unit_test; recovery_component_test;
recovery_manual_test
Test: Build and boot into recovery image on angler.
Change-Id: Ic4444f87a2f123557c71085f81dc2b2764c05ed8
Merged-In: Ic4444f87a2f123557c71085f81dc2b2764c05ed8
Move most source files into librecovery so they become testable. Only
recovery_main.cpp and logging.cpp are built into recovery module, as
they perform one-time setup (e.g. setting up logger).
Test: `mmma -j bootable/recovery` with
aosp_{angler,bullhead,fugu,dragon,marlin}-userdebug
Test: recovery_host_test; recovery_unit_test; recovery_component_test;
recovery_manual_test
Test: Build and boot into recovery image on angler.
Change-Id: Ic4444f87a2f123557c71085f81dc2b2764c05ed8
(cherry picked from commit bf4c006d7bc8a4517c82399bbffd9cb09971c0b4)
Reorder librecovery and librecovery_ui, so that librecovery stays closer
to recovery (in preparation for later changes that move more files
between the two). For the libraries in LOCAL_STATIC_LIBRARIES, reorder
them based on the dependency - local modules coming first, with external
libraries near the end. Sort the local / external modules, unless a
specific order is needed.
In tests/Android.mk, split the monolithic list of LOCAL_STATIC_LIBRARIES
based on modules. This makes adding / finding libraries easier.
There's no functionality in this CL.
Test: mmma -j bootable/recovery
Change-Id: I6836be574df565001ae9cd3d466a2b6460d90d08
