Wait for socket to close before exit(), so that last "DONEDONE" message
is correctly sent.
Test: enter recovery, sideload an OTA, verify that no read error occured
on client side. Repeat 5 times.
Bug: 155158483
Change-Id: Ibb02548d8c03fb77f8f60cb69cff84c33903adc0
Reduce the amount of wasted space on the recovery image by statically
linking all of the adb libraries into minadbd.
Bug: http://b/150317254
Test: booted aosp_walleye-eng into recovery
Change-Id: I5233b1a23c14f9d478bb77c25ebdbb0ce45bcc5a
We start minadbd and rescue services in two processes. In particular,
minadbd handles the requests from host, then communicates with rescue
service to do install/wipe works. When resuce service doesn't see any
request in a pre-defined timeout (currently 300s), rescue service will
exit to avoid endless waiting.
This CL changes minadbd to additionally send a no-op command to rescue
service as a heartbeat signal, so that host side can finish
time-consuming operations (e.g. downloading over network) while keeping
rescue service alive.
Bug: 136457446
Test: Enter resuce mode on blueline. Send `adb rescue getprop
ro.build.fingerprint` and check that rescue service doesn't exit.
Test: Stop sending the getprop command. Check that rescue service exits
after 300s.
Change-Id: Ib9d5ed710cfa94ecfe6cf393a71a0b67b2539531
This change addresses the comment in [1], which makes the results of
`adb shell getprop foo` and `adb rescue getprop foo` more consistent.
That is, both will return newline-terminated results now.
[1] https://r.android.com/c/platform/bootable/recovery/+/976340/3/minadbd/minadbd_services.cpp#188
Test: Run the following commands on taimen (under rescue mode):
`adb rescue getprop ro.build.fingerprint`
`adb rescue getprop ro.nonexistent`
`adb rescue getprop`
Change-Id: I5af47f8ea4d569b8507e259daef87749c0945f47
It dumps all the allowed properties, similar to `adb shell getprop`.
Bug: 134027350
Test: Run the command under rescue mode.
Change-Id: Ic0864ca0fb51505ec1e4f38af2464591aa576201
Most of these properties are already part of the fingerprint. This CL
allows querying them directly, instead of encouraging users to decode
from fingerprints.
Bug: 134027350
Test: Boot into rescue mode on taimen. Run `adb rescue getprop` with new
props.
Change-Id: Id4667fcaf0e908c391085b22e22c957acd01d9c4
Ass some unit tests to check if the minadbd service exit correctly in
the failure case. Also start the fuse and verify the socket communication
between minadbd with adb host, and minadbd with recovery.
Bug: 131037235
Test: run unit tests repeatedly, injects some errors and test fails
without dangling process.
Change-Id: I2f073b701b25d7f1aafc59868a7a91a8cbefaf49
This leaves the FD implementation details to subclasses. In particular,
it allows minadbd to do additional works with the FD after sideloading.
Bug: 128415917
Test: atest recovery_component_test
Test: atest minadbd_test
Test: Sideload package on taimen.
Change-Id: I106bbaad05201227bbc5fe28890bbbb06fdcb67e
This cl adds a socket pair to support the communication between recovery
and minadbd. Therefore, minadbd will be able to issue multiple commands
to recovery and get back the status of each command.
This cl also switches the adb sideload from the recovery menu to use
this protocol; and moves minadbd to a separate binary.
Bug: 130166585
Test: sideload a package
Change-Id: I80d36d5c4e6fe1ae3ea23640907bc50c0dc0d482
It's no longer needed with the newly added FuseDataProvider class. Also
cleans up the parameters for run_fuse_sideload.
Bug: 127071893
Test: unit tests pass, run a sideload
Change-Id: I1ccd6798d187cfc6ac9f559ffb3f3edf08dad55c
The fuse data provider for adb/sdcard shares common code and structures.
This cl creates a FuseDataProvider base class and provides
implementations for adb and sdcard.
In the follow cls, we can kill the provider_vtab struct; and also add
another implementation to parse a block map file and provides data.
Test: unit tests pass, sideload a package, apply a package from sdcard
Change-Id: If8311666a52a2e3c0fbae0ee9688fa6d01e4ad09
The caller of daemon_service_to_fd() in core adb has switched to
std::string_view in [1]. The mismatch breaks the sideload service, as it
picks up the wrong daemon_service_to_fd() when serving sideload.
[1] https://android-review.googlesource.com/c/platform/system/core/+/850392
Bug: 122171762
Test: `adb sideload` on taimen.
Change-Id: Ie828400768523c35c5576e2c029e38fc0ad0aff9
At present, multiple partitions such as vendor have been added,
which reduces the coupling between mobile phone manufacturers
and Android systems. However, it may increase the generated
package size substantially (e.g. from ~200MB to ~800MB).
Causes the package size to exceed the int limit (2147483647 bytes).
Change the int length parameters to long.
Bug: http://b/112003354
Test: adb sideload ota.zip (ota.zip bigger than 2147483647 bytes)
Change-Id: Ifb656431f7b961ac0e91754107578dc8b89ff14e
Signed-off-by: katao <katao@xiaomi.com>
Previously, we were relying on linker ordering pulling in minadbd's
copy of services_to_fd instead of libadbd's, which breaks when we
switch to dynamically linking. Separate out libadbd's services into a
separate function that's in a file that isn't built into libadbd, so
that we can provide our own here.
Bug: http://b/111831478
Test: mma
Change-Id: I2479947b2d81db5e750020fffc2c2c770cb31a78
Switch some function signatures to std::string to avoid memory leak.
Bug: 30039381
Test: sideload a package on angler
Change-Id: Iae1e75871a782d6e5d6dde5dcf3f18469eb63f7d
static_cast is preferable to reinterpret_cast when casting from void*
pointers returned by malloc/calloc/realloc/mmap calls.
Discovered while looking at compiler warnings (b/26936282).
Test: WITH_TIDY=1 WITH_STATIC_ANALYZER=1 mma
Change-Id: Iaffd537784aa857108f6981fdfd82d0496eb5592
Merged-In: I151642d5a60c94f312d0611576ad0143c249ba3d
Distinguish our "services.cpp" more clearly from the regular adbd
"services.cpp", and remove a few useless includes of "sysdeps.h".
Change-Id: Ided4945a3ac5916133322ca7e95fa51add9abaa4
