Commit adeb41a8c0 has switched the
argument for recovery. This CL handles the case for updater.
Note that there's a chance the updater may run against the old
recovery (and f2fs 1.4.1 binary). Not sending a 0-sector argument to
f2fs 1.4.1 also works.
Bug: 37758867
Test: Make an OTA package that calls format f2fs, with mkfs.f2fs 1.8.0
and 1.4.1 binaries respectively.
Change-Id: I4d4bbe8c57544d1c514b7aa37fbf22a0aab14e2c
We didn't report error/cause codes unless there's an explict "Abort()"
call inside the updater script. As a result, some cause codes set by
ErrorAbort() didn't show up in last_install.
To fix the issue, add a default error code when the script terminates
abnormally (i.e. with non zero status).
Bug: 37912405
Test: error/cause code shows up in last_install when argument parsing fails
Change-Id: Ic6d3bd1855b853aeaa0760071e593a00cf6f0209
Bug: 37401320
Test: build and push OTA and hit adb reboot recovery,quiescent. The screen should remain off throughout the upgrade process.
Change-Id: Ibed3795c09e26c4fa73684d40b94e40c78394d3f
Right now the update stuck in a deadlock if there's less new data than
expection. Add some checkers and abort the update if such case happens.
Also add a corresponding test.
Bug: 36787146
Test: update aborts correctly on bullhead && recovery_component_test passes
Change-Id: I914e4a2a4cf157b99ef2fc65bd21c6981e38ca47
This CL makes the following changes to RangeSet:
- Uses std::pair<size_t, size_t> to represent a Range;
- Uses std::vector<Range> to represent a RangeSet;
- Provides const iterators (forward and reverse);
- Provides const accessor;
- 'blocks()' returns the number of blocks (formerly 'size');
- 'size()' returns the number of Range's (formerly 'count').
Test: recovery_unit_test
Test: Apply an incremental update with the new updater.
Change-Id: Ia1fbb343370a152e1f7aa050cf914c2da09b1396
We don't need to take raw pointers out of the parsed arguments.
std::unique_ptr handles the dereferencing automatically.
Test: mmma bootable/recovery
Change-Id: I1beabf6e04dc350bdad7b36cee5fb345c82b28f2
Also move RangeSet into a header file to make it testable, and add unit
tests.
In RangeSet::Parse() (the former parse_range()), use libbase logging to
do assertions. This has the same effect as the previous
exit(EXIT_FAILURE) to terminate the updater process and abort an update.
The difference lies in the exit status code (i.e. WEXITSTATUS(status) in
install.cpp), which changes from 1 (i.e. EXIT_FAILURE) to 0.
Test: recovery_unit_test
Test: Apply an incremental update with the new updater.
Change-Id: Ie8393c78b0d8ae0fd5f0ca0646d871308d71fff0
LOG(INFO) already appends a newline. Don't print redundant newline.
Test: No extra blank lines when calling ui_print(). And on-screen UI
shows the same.
Change-Id: I74e9a8504a7146a6cb3dae02fe2406d0dd54069b
Then rename RangeSinkState to RangeSinkWriter. RangeSinkWriter reads
data from the given FD, and writes them to the desination RangeSet.
Test: Apply an incremental with the new updater.
Change-Id: I5e3ab6fc082efa1726562c55b56e2d418fe4acaf
Mostly for applypatch family APIs like ApplyBSDiffPatch() and
ApplyImagePatch(). Changing to size_t doesn't indicate they would
necessarily work with very large size_t (e.g. > ssize_t), just
similar to write(2). But otherwise accepting negative length doesn't
make much sense.
Also change the return type of SinkFn from ssize_t to size_t. Callers
tell a successful sink by comparing the number of written bytes against
the desired value. Negative return values like -1 are not needed. This
also makes it consistent with bsdiff::bspatch interface.
Test: recovery_component_test
Test: Apply an incremental with the new updater.
Change-Id: I7ff1615203a5c9854134f75d019e266f4ea6e714
Rename to LoadSourceBlocks() by moving the target blocks parsing part
into the caller. This allows detecting whether the target blocks have
already had the expected data before loading the source blocks. It
doesn't affect anything when applying an update package for the first
time, but it skips loading the unneeded source blocks when resuming an
update. It additionally avoids unnecessarily dumping the "corrupt"
source/stash blocks when resuming an update.
Bug: 33694730
Test: Apply an incremental update with the new updater.
Test: Resume an incremental update with the new updater.
Change-Id: I794fd0d1045be7b3b7f8619285dc0dade01398d0
Clean up a few functions that take CommandParameters& as the first
parameter. We don't need to take duplicate arguments if they always come
from CommandParameters. This redundancy came from the point we replaced
strtok()s (commit baad2d454d).
Test: Apply an incremental update with the new updater.
Change-Id: I2912b8ce6bc7580bf7f566e125f12270e679e155
The script support for BBOTA v1 and v2 has been dropped in commit
8fad03e7712082eb880ffaaffb69eb13252ce220 (platform/build).
Bug: 33694730
Test: Apply an incremental with the new updater.
Test: recovery_component_test
Change-Id: I038b1bf8d10f030cab8ec0aa6ee565c5a9545dfd
As of C++ specification size_type erase( const key_type& key );
removes the element (if one exists). There is no need to perform
the check twice.
Change-Id: I4b057c08526abc7c2a483a60f9e166e4d8f56a74
It's valid to provide only 1 argument to apply_patch_check(). We
shouldn't fail the argument parsing.
Bug: 36541737
Test: recovery_component_test passes.
Test: recovery_component_test captures the failure without the fix.
Test: The previously failed update applies successfully.
Change-Id: Iee4c54ed33b877fc4885945b085341ec5c64f663
And switch them to std::vector & std::unique_ptr
Bug: 32117870
Test: recovery tests passed on sailfish
Change-Id: I5a45951c4bdf895be311d6d760e52e7a1b0798c3
Our updater created the stashes with root permission. This causes an
access denial when the RecoverySystem service tries to clean up these
blocks after a failing update. As a result, the subsequent OTA updates
may fail due to insufficient cache space.
Bug: 36457133
Test: stashed blocks cleaned successfully after reboot
Change-Id: If0ca99638cdfa1033646f29d9cc92b5ff1bacac1
Since this was putting the intermediate file in obj/PACKAGING, every
installclean was removing it and triggering updater to rebuild. Instead,
use the standard generated-sources-dir. The dep file can also be removed
now that ninja will re-run the generator if the command line changes.
Test: m -j updater; m installclean; m -j updater
Test: Only change to aosp_fugu updater before/after is the debug info
Change-Id: I20928bd2049d4a3d4e21f83fd64d16cfdc541958
This reverts commit 90eff6a340.
Also fix the bug where stashed blocks are not freed.
Bug: 21124445
Test: Previous failed update succeeded on bullhead
Change-Id: I23d232331a2beb51b6dcc82c957c87bc247d0268
Test: Apply an incremental BBOTA package with the new updater.
Test: Resume an interrupted BBOTA (so it cleans up the partial stash).
Change-Id: I620cc57ee6366845bcffbc19210f7a01e2196052
This reverts commit bb0cd75a0e.
Broke the 'free' command that deletes a stash.
Bug: 36242722
Test: The previously failed incremental applies successfully.
Change-Id: I1237cb0a33adfbeea57e0465b629704862ba13aa
It will be helpful for debug if we know which blocks are corrupted after
a verification failure. This CL prints the SHA-1 for each source block
in a transfer command if these blocks don't have an expected hash. And
along with the correct SHA-1, we will catch the corrupted blocks.
Bug: 21124445
Test: Printed the mismatched SHA-1 for bullhead during an update.
Change-Id: I683d4bdaf9a335035045b3f532b3a265b2fcbbfc
This CL removes the updater support for delete(), symlink(), rename(),
set_metadata() and set_metadata_recursive(). Such functions have been
removed from the generation script in commit
f388104eaacd05cfa075d6478369e1d0df5ddbf3 (platform/build).
Note: This CL also removes delete_recursive() which seems to have never
been supported in generation script.
Bug: 35853185
Test: recovery_component_test passes.
Change-Id: I51e1ec946fa73761118fa1eaa082423df6d588e9
-1 is not a valid exit status.
Also replace a few exit(1) with exit(EXIT_FAILURE).
Test: mmma bootable/recovery
Change-Id: I4596c8328b770bf95acccc06a4401bd5cabd4bfd
Now ApplyBSDiffPatch() will stream the output to sink as we go instead
of sinking everything at the end.
Test: recovery_host_test
Bug: 26982501
Change-Id: I05b6ed40d45e4b1b19ae72784cf705b731b976e3
Currently the ui_print command between the recovery and updater doesn't
append newline. Updater has to send an extra "ui_print" command without
any argument to get the line break. This looks unnecessary. And not all
the callers (including the ones in bootable/recovery) are following this
protocol when sending the ui_print command.
This CL simplifies the protocol to always print with a newline for
ui_print command. When updating from an old recovery with the new
updater, all the ui_print'd strings would appear in one line as a side
effect. But a) it would only affect the text-mode UI, which won't be
shown to users; b) log files won't be affected.
Bug: 32305035
Test: Apply an update with the new updater on top of an old and new
recovery image respectively.
Change-Id: I305a0ffc6f180daf60919cf99d24d1495d68749b
We could inject I/O faults during an OTA update for test purpose. But we
should skip the injection if the update is an retry. Otherwise the
update test will simply keeps failing.
Bug: 34159970
Test: Apply the same package on angler and the update succeeds on the 2nd try.
Change-Id: Id274e5475e3bc8d25d50a8cf61a77d2e32c569d6
Returning the parsed RangeSet directly (as opposed to using some pointer
parameter) to make the code cleaner.
Test: Apply an incremental with the new updater.
Change-Id: I8c99e701f189eb6a3eacc0d647e5a3a85fbeb3eb
Change the stash size computation from int to size_t.
Test: Apply an incremental BBOTA with the new updater.
Change-Id: Ib45b71b826fec6aa0ffafc67c17735825634eae0
