The expression "!fd" calls the implicit conversion to int, but comparing
the raw fd against 0 does not work, since open() and other POSIX calls
returning a file descriptor use -1 to signal an error.
Test: m recovery
Change-Id: I0847c276f39cb9dd09c7ffb96951276113418fc8
bootable/recovery/applypatch/imgpatch.cpp:57:3: error: comparison of integers of different signs: 'unsigned int' and 'int' [-Werror,-Wsign-compare]
CHECK_GT(expected_target_length, 0);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
bootable/recovery/applypatch/freecache.cpp:145:50: error: comparison of integers of different signs: 'long' and '__fsblkcnt64_t' (aka 'unsigned long') [-Werror,-Wsign-compare]
if (sf.f_bsize == 0 || free_space / sf.f_bsize != sf.f_bavail) {
~~~~~~~~~~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~
bootable/recovery/applypatch/freecache.cpp:190:16: error: comparison of integers of different signs: 'int64_t' (aka 'long') and 'size_t' (aka 'unsigned long') [-Werror,-Wsign-compare]
if (free_now >= bytes_needed) {
~~~~~~~~ ^ ~~~~~~~~~~~~
bootable/recovery/applypatch/freecache.cpp:233:18: error: comparison of integers of different signs: 'int64_t' (aka 'long') and 'size_t' (aka 'unsigned long') [-Werror,-Wsign-compare]
if (free_now >= bytes_needed) {
~~~~~~~~ ^ ~~~~~~~~~~~~
Test: `mmma -j bootable/recovery/applypatch` with -Wsign-compare
Test: Run recovery_unit_test on marlin.
Change-Id: I4aa1fd0f9b7205b9e4e50874fc4bccb62951e7fe
applypatch() was initially designed for file-based OTA, operating on
individual files. It was later extended to allow patching eMMC targets
as a whole, in favor of block-based updates.
As we have deprecated file-based OTA since Oreo, part of the code in
applypatch() has become obsolete. This CL refactors the related
functions, by removing the obsolete logic and focusing on eMMC targets.
Since this CL substantially changes applypatch APIs, it adds new
functions to avoid unintentionally mixing them together. In particular,
it removes `applypatch()`, `applypatch_check()`, `applypatch_flash()`,
and adds `PatchPartition()`, `PatchPartitionCheck()`, `FlashPartition()`
and `CheckPartition()`. It also replaces the old Edify functions
`apply_patch()` and `apply_patch_check()` with `patch_partition()` and
`patch_partition_check()` respectively.
This CL requires matching changes to OTA generation script (in the same
topic).
Bug: 110106408
Test: Run recovery_unit_test and recovery_component_test on marlin.
Test: `m dist` with non-A/B target. Verify
/system/bin/install-recovery.sh on device.
Test: `m dist` with non-A/B target using BOARD_USES_FULL_RECOVERY_IMAGE.
Verify /system/bin/install-recovery.sh on device.
Test: Install an incremental OTA with the new updater and scripts.
Change-Id: Ia34a90114bb227f4216eb478c22dc98c8194cb7f
Now it's less beneficial to inject I/O faults since we don't see many of
them. Remove the library that mocks I/O failures. And switch to android::base
I/O when possible.
Bug: 113032079
Test: unit tests pass
Change-Id: I9f2a92b7ba80f4da6ff9e2abc27f2680138f942c
This applies to the standalone applypatch executable
(/system/bin/applypatch on device). This executable is only used when
installing (via patching or flashing) a recovery image on non-A/B
device.
This CL removes the support for patching non-eMMC targets from
applypatch that has been deprecated as part of file-based OTA. For
patching eMMC targets, it also drops the support for accepting multiple
patches (not useful, since the source file must be fixed).
This CL needs the matching change in the same topic, which writes the
script of "/system/bin/install-recovery.sh". Note that this CL doesn't
chanage the applypatch API signatures, in order to minimize the CL size.
*BEFORE*
usage: /system/bin/applypatch [-b <bonus-file>] <src-file> <tgt-file> <tgt-sha1> <tgt-size> [<src-sha1>:<patch> ...]
or /system/bin/applypatch -c <file> [<sha1> ...]
or /system/bin/applypatch -l
Filenames may be of the form
EMMC:<partition>:<len_1>:<sha1_1>:<len_2>:<sha1_2>:...
to specify reading from or writing to an EMMC partition.
*AFTER*
Usage:
check mode
applypatch --check EMMC:<target-file>:<target-size>:<target-sha1>
flash mode
applypatch --flash <source-file>
--target EMMC:<target-file>:<target-size>:<target-sha1>
patch mode
applypatch [--bonus <bonus-file>]
--patch <patch-file>
--target EMMC:<target-file>:<target-size>:<target-sha1>
--source EMMC:<source-file>:<source-size>:<source-sha1>
show license
applypatch --license
Bug: 110106408
Test: Run recovery_component_test and recovery_unit_test on marlin.
Test: Build a non-A/B target that has /system/bin/install-recovery.sh.
Verify that it installs recovery image successfully.
Test: Build a non-A/B target that has /system/bin/install-recovery.sh in
flashing mode. Verify that it installs recovery image successfully.
Change-Id: I71f9a71fb457e6f663e0b5511946949e65b4b78c
They are doing exactly the same thing, except for the slightly different
error return value (1 vs -1).
int CacheSizeCheck(size_t bytes);
int MakeFreeSpaceOnCache(size_t bytes_needed);
This CL consolidates the two functions and uses bool as its return type.
// Checks whether /cache partition has at least 'bytes'-byte free space. Returns true immediately
// if so. Otherwise, it will try to free some space by removing older logs, checks again and
// returns the checking result.
bool CheckAndFreeSpaceOnCache(size_t bytes);
Test: Run recovery_unit_test and recovery_component_test on marlin.
Change-Id: I94a96934d2b18713f8f39ad5aa96a02c98d87963
Prior to this CL, FreeSpaceForFile() was returning `size_t`, which may
overflow on ILP32 when called on a partition with 4GiB+ free space.
Additionally, it was returning static_cast<size_t>(-1) on error, but the
caller in freecache.cpp didn't check for that.
This CL changes its return type to `int64_t`, and moves the function
into freecache.cpp since there's no external caller.
Test: Run recovery_unit_test on marlin.
Test: Code search shows no external user of FreeSpaceForFile().
Change-Id: I00f501a057726e1f1ab69f367c46c77b30f2d774
We already know the flakiness happens in bspatch, and the issue is
tracked in b/80193170.
Bug: 67849209
Test: unit tests pass
Change-Id: Ib4772b8f2f0225125096fe7407d083b5bb542cfb
Test: mmma -j bootable/recovery
Test: Run recovery_component_test and recovery_unit_test on marlin.
Change-Id: I4b240e3e771c387b9694be9c0f2f74e0265ab4cb
Also fix an error-pone behavior in previous code when verifying an eMMC
target. As long as it loads the partition content successfully according
to the SHAs embedded in the filename, it shouldn't further check against
the SHAs given in the second argument. Because the loaded contents
relate to a specific partition size.
For example:
apply_patch_check(
"EMMC:/boot.img:src_size:src_hash:tgt_size:tgt_hash",
"src_hash");
Assume "/boot.img" already has the desired hash of "tgt_hash", the
previous code would give wrong verification result. The issue can be
addressed by additionally listing "tgt_hash" as one of the desired SHAs
(or by applying this CL).
Bug: 110106408
Test: Run recovery_unit_test and recovery_component_test on marlin.
Change-Id: I8daafdbecd083f687e24d563ab089caa25667633
Note that the code exists in debugging path only, and won't be hit
unless device has flaky flash.
Test: Run recovery_unit_test and recovery_component_test on marlin.
Change-Id: I0c71adc271f08f00e3eabd9d14cd8af3186c5bae
Also two minor changes (other than renaming some parameters):
- Added constness to the first parameter of FindMatchingPatch();
- Declared WriteToPartition() as static.
Bug: 110106408
Test: mmma -j bootable/recovery
Change-Id: I388958c944a23ce4a38a757ce2249f6a89dd4f03
The imgpatch will fail on empty deflates because the bspatch won't call
the sink function if the target length is zero.
Instead of compressing an empty string, it's cleaner to not generate such
empty deflate chunks in the patch. Therefore, we can just convert the
chunk type to raw if the target length is smaller than the patch data.
Also adjust some unit tests and add the testdata gzipped_source &
gzipped_target. These two files are ~1K each and are generated by
gzipping two slightly different regular files.
Bug: 79265132
Test: unit tests pass, imgpatch applys successfully on the given src/tgt
Change-Id: I6bfff3251918137f6762a6f9e9551642371a1124
Save the target file to tempfile upon unittest failures so that we can
try to decompress the deflate chunks in the flaky unittests. And print
the zlib version in case that gets changed.
Also the SHA1 of the uncompressed data seems correct; so only keep the
final SHA1 to double confirm.
Bug: 67849209
Test: recovery_component_test
Change-Id: Ic6447c2b75c29379d6844cd23a0ff1c4305694a0
We have a general need for overriding more paths (e.g. "/tmp"), mostly
for testing purpose. Rename CacheLocation to Paths, and use that to
manage TEMPORARY_{INSTALL,LOG}_FILE.
Test: mmma -j bootable/recovery
Test: recovery_component_test
Change-Id: Ia8ce8e5695df37ca434f13ac4d3206de1e8e9396
Dump the SHA1 of the uncompressed data in applypatch to confirm if we
are at least doing the bspatch part correctly. (I expect so since the actual
length of the uncompressed data matches the expected length).
Also try to decompress the deflate chunk inside the recovery image for
these two flacky tests. In theory, there shouldn't be randomness in
zlib; so we would know if we process the data wrongly if the deflate fails
to decompress.
Bug: 67849209
Test: recovery_component_test
Change-Id: Id947522153b1eeb0d10d161298a96fb045f92018
The apply patch test should have a deterministic way to append patch
data. Add debug logs to dump the length and SHA1 of each step to further
track down the flakiness.
Also redirect the debug logging to stdout in case the logcat becomes too
chatty.
Bug: 67849209
Test: Run recovery_component_test
Change-Id: I42bafef2d9dee599719ae57840b3d8c00d243ebd
As they're accepting the SinkFn callback, it makes more sense to leave
the work to their callers.
Test: mmma -j bootable/recovery
Test: Run recovery_component_test on marlin.
Test: No other active user of the two functions.
Change-Id: I8d67b38ce037925442296f136b483e0c71983777
After splitting the previously flaky
ApplyPatchModesTest#PatchModeEmmcTarget tests,
PatchModeEmmcTargetWithMultiplePatches now becomes the sole victim. This
CL dumps additional info to narrow down the cause.
Bug: 67849209
Test: `recovery_component_test` on marlin.
Test: It dumps additional info after using corrupt bonus.file.
Change-Id: Ic5436de457cc882a51d03f49d5cee70077f7d3df
We set the limit of the max stash size to 80% of cache size. But the
cache space can still be insufficient for the update if the log files
occupy a large chunk of /cache. So remove the old logs for now to make
room for the update.
Bug: 77528881
Test: unit tests pass
Change-Id: Ia8bcb0ace11f8164ad9290bfb360e08e31d282cb
This class allows us to set the following locations dynamically:
cache_temp_source, last_command_file, stash_directory_base.
In the updater's main function, we reset the values of these variables
to their default locations in /cache; while we can set them to temp
files in unit tests or host simulation.
Test: unit tests pass
Change-Id: I528652650caa41373617ab055d41b1f1a4ec0f87
In the split mode of imgdiff, we used to assume that the size of a split
target chunk is always greater than the blocksize i.e. 4096. This may
lead to the following assertion failure:
I0221 04:57:33.451323 818464 common.py:205 imgdiff F 02-21 04:57:33 821203 821203 imgdiff.cpp:999]
Check failed: tgt_size >= BLOCK_SIZE (tgt_size=476, BLOCK_SIZE=4096)
This CL removes the assumption and handles the edge cases.
Test: generate and verify the incremental update for TFs in the bug; unit test passes
Bug: 73757557
Bug: 73711365
Change-Id: Iadbb4ee658995f5856cd488f3793980881a59620
The sdk_mac on build server fails with the error:
bootable/recovery/applypatch/freecache.cpp:23:10: fatal error: 'sys/statfs.h' file not found
So we will disable libapplypatch on mac.
Test: the library still builds on linux; and check the other host targets in the same cl.
Change-Id: Ie4a30708726e51c810f7ad7f1085d38154076cca
When running the update simulation, we choose to skip the cache size
check for now due to the lack of "/cache" on host. And in later cls we
can implement a cache size estimator to make the check more constrained.
Also build the host version of support libraries.
Test: unit test pass
Change-Id: I3ed93c857fd02f7b62f5baba9130f75c3236e717
It used to keep track of the stat(2) info (e.g. st_mode/st_gid/st_uid)
while patching a file in file-based OTA.
Test: Build and use the new updater to apply an update on bullhead.
Change-Id: Ibf8f0f4b14298a9489bf24a2678bb279c5d9c8f3
Also add a verbose option. And we won't print messages of 'info'
severity unless '-v' is present.
Test: run imgdiff and check the logs.
Change-Id: I1b90874baea8e72e2a2323a0b63bc5d35e653e6b
It used to be "const Value*", but nullptr won't be a valid input.
Test: recovery_host_test; recovery_component_test
Change-Id: I904b5689ac3e64504088bf0544c9fb5d45a52243
The function ApplyBSDiffPatch() defined in bspatch.cpp is declared in
applypatch.h, but it includes "bspatch.h" from the bsdiff/ project,
which is at least confusing. There is no "bspatch.h" in this repo, so
the include actually reffers to the one in bsdiff. This patch uses the
"bsdiff/bspatch.h" form instead to avoid confusion.
Bug: None
Test: It builds.
Change-Id: I6b6ffd6725b2b34ff644aed93683f69779103661
We encountered segfaults in Imgdiff host tests due to the failure to
reset states of getopt. The problem can be solved by switching to use
bionic's gtest where a new process is forked for each test.
Also modify the recovery_component_test to make sure it runs in parallel.
Changes include:
1. Merge the writes to misc partition into one single test.
2. Change the hard coded location "/cache/saved.file" into a configurable
variable.
Bug: 67849209
Test: recovery tests pass
Change-Id: I165d313f32b83393fb7922c5078636ac40b50bc2
$ valgrind --leak-check=full out/host/linux-x86/nativetest64/recovery_host_test/recovery_host_test
==36755== 112 bytes in 1 blocks are definitely lost in loss record 4 of 16
==36755== at 0x40307C4: malloc (valgrind/coregrind/m_replacemalloc/vg_replace_malloc.c:270)
==36755== by 0x40C1669: operator new(unsigned long) (external/libcxxabi/src/cxa_new_delete.cpp:46)
==36755== by 0x18D6A8: ApplyImagePatch(unsigned char const*, unsigned long, Value const*, std::__1::function<unsigned long (unsigned char const*, unsigned long)>, sha_state_st*, Value const*) (bootable/recovery/applypatch/imgpatch.cpp:62)
==36755== by 0x18D02B: ApplyImagePatch(unsigned char const*, unsigned long, unsigned char const*, unsigned long, std::__1::function<unsigned long (unsigned char const*, unsigned long)>) (bootable/recovery/applypatch/imgpatch.cpp:134)
==36755== by 0x160D15: GenerateTarget(std::__1::basic_string<char, std::__1::char_traits<char>, std::__1::allocator<char> > const&, std::__1::basic_string<char, std::__1::char_traits<char>, std::__1::allocator<char> > const&, std::__1::basic_string<char, std::__1::char_traits<char>, std::__1::allocator<char> >*) (bootable/recovery/tests/component/imgdiff_test.cpp:85)
==36755== by 0x11FA7D: verify_patched_image(std::__1::basic_string<char, std::__1::char_traits<char>, std::__1::allocator<char> > const&, std::__1::basic_string<char, std::__1::char_traits<char>, std::__1::allocator<char> > const&, std::__1::basic_string<char, std::__1::char_traits<char>, std::__1::allocator<char> > const&) (bootable/recovery/tests/component/imgdiff_test.cpp:96)
==36755== by 0x12966C: ImgdiffTest_zip_mode_smoke_trailer_zeros_Test::TestBody() (bootable/recovery/tests/component/imgdiff_test.cpp:295)
==36755== by 0x235EF9: testing::Test::Run() (external/googletest/googletest/src/gtest.cc:2455)
==36755== by 0x236CBF: testing::TestInfo::Run() (external/googletest/googletest/src/gtest.cc:2653)
==36755== by 0x2372D6: testing::TestCase::Run() (external/googletest/googletest/src/gtest.cc:2771)
==36755== by 0x23EEE6: testing::internal::UnitTestImpl::RunAllTests() (external/googletest/googletest/src/gtest.cc:4648)
==36755== by 0x23EB45: testing::UnitTest::Run() (external/googletest/googletest/src/gtest.cc:2455)
std::unique_ptr<z_stream, decltype(&deflateEnd)> strm(new z_stream(), deflateEnd);
Only the internally allocated buffers inside 'strm' would be free'd by
deflateEnd(), but not 'strm' itself.
This CL fixes the issue by moving 'strm' to stack variable. Note that we
only need to call deflateEnd() on successful return of deflateInit2().
Test: recovery_host_test && recovery_component_test
Change-Id: I39b9bdf62376b8029f95cab82c8542bfcb874009
bsdiff interface is changing such that it hides the suffix array
pointer from the public interface. This allows to use a different
suffix array data size depending on the input size, running much faster
in the normal case.
Bug: 34220646
Test: `make checkbuild`; Ran an incremental update generation on a non-A/B device.
Change-Id: I78e766da56cf28bc7774b8c8e58527bc11d919fb
Since it has grown much larger, users of the header shouldn't compile
and carry their full copies.
Also add missing header includes in imgdiff.cpp and imgdiff_test.cpp.
Test: mmma bootable/recovery
Test: recovery_unit_test; recovery_component_test; recovery_host_test
Change-Id: I88ca54171765e5606ab0d61580fbc1ada578fd7d
We have shared lib target for libbz now (and libbz.so is already on
device because of /system/bin/bzip2).
Test: m applypatch
Change-Id: I5fe2468a8d535840245f081a92d436240dddbf6b
