Currently bootimage_test_harness is only built on a few targets
on release branches. However, we might have a last minute build
breakage on release branches as bootimage_test_harness is not
built on dev branches. Moving it to droidcore so we can have more
completed build coverage on pre-submit/post-submit builds.
Bug: 183865297
Test: `make` then check $OUT
Change-Id: I496609401a9444706726256d2f7b45c6bb69ee94
Otherwise the check fails, as it depend on non-existent dexpreopt.config
files. This CL fixes broken build cf_x86_phone-userdebug_coverage.
Bug: 183931403
Bug: 132357300
Test: forrest build for cf_x86_phone-userdebug_coverage.
Change-Id: I6f977c1e0c2d2160b1813d2d1c36459f0641235e
After aosp/1184262 is submitted, PRODUCT_CHECK_ELF_FILES is deprecated
and nobody is using this variable anymore.
Bug: 149715904
Test: Presubmit; Should be noop
Change-Id: Iaf4a6ae1fe4062684a9699b7ef999030ff483e16
This reverts commit ccfea17fb7.
Reason for revert: Original bug was resolved by updating branch config
Change-Id: I2327092261a2147fa8f2be3d878db04228e65511
For consistency with android-11 GKI boot-debug.img, we should
put debug resources under the 'fisrt_stage_ramdisk' dir. This is
needed for devices with `androidboot.force_normal_boot=1` in the
kernel cmdline, where init will chroot into /fisrt_stage_ramdisk.
For devices without force_normal_boot, they still can use their
vendor_boot-debug.img for debugging purpose.
Bug: 183670217
Test: `make bootimage_debug`, then use unpack_bootimg and
`lz4 -d -c ramdisk | toybox cpio -i` to unpack the ramdisk
for inspection.
Change-Id: I0a79440dafd091141a1203a2c2c7be5bc1bfc836
For now the config is always set to false (updatable boot jars are
excluded), but this may change in the future.
Bug: 178467404
Test: lunch aosp_cf_x86_64_phone-userdebug && m
Change-Id: I1b45a89748e065a29130efbf8b54dddfae69e48b
This change doesn't change the condition for building super_empty.img,
it just add a toggle PRODUCT_BUILD_SUPER_EMPTY_IMAGE that product
makefiles can use to skip building super_empty.img.
Products that don't use super_empty at all, for example GSI, can set
this option to ensure the super_empty.img is not built.
Bug: 183068624
Test: "m dist" on GSI and check the build artifacts under OUT and DIST
directories, and check the contents of *-img-*.zip
Change-Id: I54943952873d2d297fd9d18cbe14742bc12ae9c6
add_json_bool converts non-empty string to true, and empty string to
false. But some of boolean variables are meant to be set either "true"
or "false". In that case "false" may lead to a mismatch. This adds
filter to boolean variables which are directly compared to "true", like
ifeq ($(VAR),true)
Bug: 183483152
Test: build
Change-Id: I0dc4a05293a3233ae4958335781a19e6445a3799
If set to true, it disables <uses-library> checks for a product. It is
possible to override with environment variable RELAX_USES_LIBRARY_CHECK
on the command-line.
Per product configuration is needed rather than per board configuration
(such as BUILD_BROKEN_* variables) because of the specifics of
<uses-library> checks: they depend on the product packages list, and
not on the board config.
One example of a product family that needs to disable the checks are
the SDK builds (e.g. sdk_gphone_x86_64), see b/183339664.
Bug: 183339664
Bug: 132357300
Test: treehugger
Change-Id: Ia58559e4e70163da94e9eb7b8a6133e0cbecd459
It should be "filtered" by "true" because all non-empty values become
true when using add_json_bool.
Test: m selinux_policy on sc-arc
Change-Id: I35d5881d83746230793cf8ced76885607e82334a
Link against the libunwind.a shipped with the NDK so it matches what's
linked into the NDK's libc++_shared.so.
For arm32, binary.mk and cxx_stl_setup.mk had been adding two different
versions of the LLVM unwinder to the same linker command-line. Remove
the duplicate one from cxx_stl_setup.mk.
-Wl,--exclude-libs is now unnecessary because the symbols are marked
hidden in the archive itself.
Bug: http://b/153025717
Test: device boots, manually inspect some linker command lines
Change-Id: Ie7182bd565014348b16448976dc6587d2885ba99
PlatformSepolicyVersion and BoardSepolicyVers haven't assigned correctly
so far. Below is the reason why it hasn't been discovered yet.
DeviceConfig.PlatformSepolicyVersion() was added to support mixed
sepolicy build (setting BOARD_SEPOLICY_VERS and building vendor sepolicy
with old plat policy files). Soong compares PlatformSepolicyVersion()
and BoardSepolicyVers(), and used old vendor sources if both are
different. Back then, the only place where such logic played a role was
selinux contexts. Test codes were running as intended: after setting
BOARD_SEPOLICY_VERS the context files were built against old policies.
But there were two mistakes:
1) PlatformSepolicyVersion() was not added to soong_config.mk, so it was
always empty.
2) BOARD_SEPOLICY_VERS was set to default in system/sepolicy/Android.mk,
which was processed after soong_config. So if BOARD_SEPOLICY_VERS was
not set in BoardConfig.mk, BoardSepolicyVers() was empty, not
PLATFORM_SEPOLICY_VERSION.
And there were no issues as Soong only checked equality.
To fix the issue correctly, this commit adds the variable
PlatformSepolicyVersion, and then handles BoardSepolicyVers correctly by
returning PlatformSepolicyVersion if it's empty.
Test: set BOARD_SEPOLICY_VERS and see vendor_file_contexts changes
Change-Id: I4e306ec1f5225094a39f0c8d94f5e7683d70d60e
This is needed for test mapping to have module-info.json built out for
device targets so that test harness can do some checks to ensure the
test is properly configured in TEST_MAPPING files.
module-info has alreay depended on droidcore, which will be
built out in the infrastructure.
Verified in a forrest run: https://android-build.googleplex.com/builds/forrest/run/L81000000840964024
Bug: 154931418
Test: m -j droidcore
m -j module-info
Change-Id: I76b97debe3fbd51c2dc033c91ed9c2eb73cfa8a2
If system and vendor are built separately, none of the two
builds contained kernel information. The process of extracting
kernel information shouldn't depend on system and vendor
builds, but on the existance of the kernel image.
With this change, one of system or vendor build may have
INSTALLED_KERNEL_IMAGE defined and the other has
PRODUCT_OTA_ENFORCE_VINTF_KERNEL_REQUIREMENTS defined. The one
with INSTALLED_KERNEL_IMAGE defined will contain kernel information
in target files.
After target files are merged, check_target_files_vintf will kick
in to do the checks properly.
Test: forrest
Bug: 180475190
Change-Id: I8d887dd94e1171ab277f02f25534caf098e3faae
Compatibility library "android.hidl.manager-V1.0-java" should go
before "android.hidl.base-V1.0-java" in class loader context for
dexpreopt, because this is the order used by PackageManager when it
constructs class loader context on device.
This allows to avoid "ClassLoaderContext classpath element mismatch"
errors on first boot for Calendar and messaging apps, which have old
enough targetSdkVersion to need HIDL compatibility libraries. Previously
the errors were masked because these apps used the deprecated
&-classpath hack.
Bug: 132357300
Test: lunch aosp_cf_x86_64_phone-userdebug && m && launch_cvd \
adb wait-for-device && adb root && adb logcat \
| grep -E 'ClassLoaderContext [a-z ]+ mismatch'
# empty grep output, no errors
Change-Id: Ibde9a4578cd86b85a9e7f11d8752716b6567e51e
Java modules that are defined in makefiles are not processed in
topological order, so it is necessary to communicate information from
dependencies via dexpreopt.config files. This has already been done in
make/core/dex_preopt_config_merger.py, and now manifest_check.py also
needs to get library names from their dexpreopt.config files.
This is to accommodate Java libraries which name differs from their
modules name. Soong properties `uses_libs`/`optional_uses_libs` and
makefile vars `LOCAL_USES_LIBRARIES`/`LOCAL_OPTIONAL_USES_LIBRARIES`
contain module names, not library names, so it is necessary to translate
them when comparing against library names in the manifest.
Bug: 132357300
Test: lunch cf_x86_64_phone-userdebug && m
Change-Id: I769b508a927d87a5ffbabf9aa45eebfb954b8bd2
Move manifest_check (a.k.a. verify_uses_libraries check) from makefiles
for specific module types to common makefile dex_preopt_odex_install.mk,
which is included by all Java modules that may require dexpreopt. If a
modules locally disables dexpreopt, it still goes through manifest_check
(unless dexpreopt is globally disabled or the module has no Java code).
This CL allows to have manifest_check and dexpreopt in the same makefile
(which is needed for a follow-up CL that will reuse dexpreopt variables
for manifest_check).
Bug: 132357300
Test: lunch cf_x86_64_phone-userdebug && m
Change-Id: Ia217cfc247ae43d8fc716bfc1fe9dcce1d00aa7f
Commit I9967d06bde0e18a12b84b5b0b568db09765fe305 supports adding a
generic boot_signature into boot.img v4. This change allows replacing
the boot_signture signing key with a release key during the release
process.
The default GKI signing key can be specified in a BoardConfig.mk via:
BOARD_GKI_SIGNING_KEY_PATH := external/avb/test/data/testkey_rsa2048.pem
BOARD_GKI_SIGNING_ALGORITHM := SHA256_RSA2048
BOARD_GKI_SIGNING_SIGNATURE_ARGS := --prop foo:bar
The release signing key/algorithm can be specified by the following options
when invoking sign_target_files_apks:
--gki_signing_key=external/avb/test/data/testkey_rsa4096.pem
--gki_signing_algorithm=SHA256_RSA4096
Additional arguments for generating the GKI signature can be
specified as below:
--gki_signing_extra_args="--prop gki:prop1 --prop gki:prop2"
Bug: 177862434
Test: make dist
Test: sign_target_files_apks \
--gki_signing_key=external/avb/test/data/testkey_rsa4096.pem \
--gki_signing_algorithm=SHA256_RSA4096 \
--gki_signing_extra_args="--prop gki:prop1 --prop gki:prop2" \
./out/dist/*-target_files-eng.*.zip signed.zip
Test: Checks GKI boot_signature is expected after signing:
`unzip signed.zip IMAGES/boot.img`
`unpack_bootimg --boot_img IMAGES/boot.img --out unpack`
`avbtool info_image --image unpack/boot_signature`
Test: unit test: releasetools_test and releasetools_py3_test
Change-Id: I61dadbc242360e4cab3dc70295931b4a5b9422a9
