Bug: 63866463
Test: TreeHugger
Test: m -j otapackage
Test: `m -j otatools-package`. Check bin/ota_from_target_files is
available. Build an OTA package with standalone otatools.
Change-Id: I533dee1c6997d233601e7f4eae637ff5743ed637
Taking an extracted target_files dir input is only needed for
add_img_to_target_files.py, in particular for the call from build
system. For the case of img_from_target_files.py, it goes much faster
with zip2zip (3m vs 7s in my local test). This CL drops the unneeded
code path in preparation for the switch to zip2zip.
Test: `python build/make/tools/releasetools/img_from_target_files.py \
-v aosp_taimen-target_files.zip aosp_taimen-img-test.zip`
Change-Id: I7f85d7d629d6fd1621a082f94a11cac7c3e6bbf2
The change in [1] allows brillo_update_payload to write to stdout/stderr
directly without buffering, to ensure dumping progress to screen
continously. However, it now unconditionally writes to stdout/stderr
even if caller doesn't specify `-v`. The behavior upsets
PythonUnitTestResultParser in [2], which doesn't want any unexpected
output from stderr for result parsing.
This CL updates the logic to only give continous outputs in verbose
mode.
[1] commit 2f7e11ef27
[2] https://android.googlesource.com/platform/tools/tradefederation/+/refs/heads/master/test_framework/com/android/tradefed/testtype/PythonUnitTestResultParser.java
Test: Run ota_from_target_files.py with `-v`. Check there's continous
output from brillo_update_payload.
Test: `python -m unittest -v test_ota_from_target_files > /dev/null`
doesn't show outputs from brillo_update_payload.
Change-Id: I3b851203ef011a5b4d982948cf52793f6fb6ad2d
Bug: 137853921
Bug: 138671115
Test: python -m unittest test_common
Test: python -m unittest test_add_img_to_target_files
Test: Ran 'merge_builds --build_vbmeta' for two devices, one with the
vbmeta struct on system.img and another with vbmeta_system.img. Flashed
the regenerated vbmeta.img files on devices, devices boot.
Change-Id: I8d7585c7af468be3d242d8aceeed6d27e6fc6d96
This allows test runner to take care of the external tools setup, then
to start the test without a lunch'd environment. This is needed before
having supports like python_test_helper that packs dependents into
releasetools_test module.
Bug: 138791766
Test: Don't lunch any target. Use `FORCE_RUN_RELEASETOOLS=1 python -m
unittest -v test_add_img_to_target_files` and check there's no
skipped testcases.
Change-Id: Iafeaba54fc228d8e1fc5ff3c91f7ffebef18ad7f
It used to be packed at IMAGES/recovery-two-step.img, but to serve OTA
purpose only.
Test: `m dist` with a non-A/B target. Check the file in the generated
target_files.zip.
Test: Create two-step package. Check that recovery-two-step.img is used.
Change-Id: Iec6a73c682e0f844cd8c0b758c9470fa35dd15d8
Based on the actual semantics, it actually wants an in-memory _bytes_
buffer (io.BytesIO), especially when running with Python 3. This CL
fixes the issue and adds a unittest.
Bug: 131631303
Test: python -m unittest test_sign_target_files_apks
Test: python3 -m unittest test_sign_target_files_apks
Change-Id: I3fb067acc26713f1842e831225607779fd0d1b7e
- Removes functions that can be replaced with one-line external methods
- Moves read_config_list to common alongside similar methods LoadDictionaryFrom*
- Runs pyformat on merge_target_files.py
Bug: 137853921
Test: python -m unittest test_merge_target_files
Test: Using merge_target_files.py to create a merged build, & booting.
Change-Id: I833c1086db41e1374057cc7447fc50d1915734a7
This helps to break the circular dependency between common and
blockimgdiff.
Bug: 32379627
Test: unit tests pass
Change-Id: I90b5ff34782acbfac86f36265bd96c207d898bf6
This allows sharing the same signing config on different target_files
zips. Nonexistent APEX will be ignored with a warning.
Bug: 137249701
Test: Run sign_target_files_apks with APEX overrides.
Change-Id: I2bad0f5c00753ed36ec5ae3431c7dc2ff1fc3e9c
Merged-In: I2bad0f5c00753ed36ec5ae3431c7dc2ff1fc3e9c
(cherry picked from commit b369c7226a)
For very long processes, we might want to keep stdout and stderr
by default to None.
So no redirection will occur in the child process as explained in:
https://docs.python.org/2/library/subprocess.html
That will result in the child process stdin and stderr to be same
than in common.py and avoid to have the logs blocked during the
child process execution and flushed only when child process terminates.
Since the logs are continously displayed, it allows to easily confirm
that the process is not blocked.
Bug: 133380588
Test: generate iota & Check that the logs are not blocked.
Change-Id: I6d6cb56547bf3a4a4334dfa22b6b2b05d2c36a5e
Signed-off-by: Regnier, Philippe <philippe.regnier@intel.com>
While in theory this could incur memory overhead for Python 2, the
impact is low for the existing use cases (plus we're moving away from
Python 2).
Bug: 131631303
Test: No additional occurrence of iteritems.
Test: Build with Python 3.
Change-Id: I0205c9edf25f46e3d85967c7dd2c1af035757741
And a few minor clean-ups to the styling.
Bug: 131631303
Test: python -m unittest test_merge_target_files
Test: python3 -m unittest test_merge_target_files
Test: Use `python merge_target_files` to merge two target_files zips.
Test: Use `python3 merge_target_files` to merge two target_files zips.
Change-Id: I8502dfb243408f658d022e8d5e5fbb60066e4ff0
Split merge_target_files function into several steps, so we can increate
readability and add conditional flows for other *SSI mixed build with less effort
Test: m -j & atest passed
Change-Id: I558f9dd5bca31b132a09cb36d9dfcd30c92efbc9
This CL changes the condition for building super_empty.img from
PRODUCT_BUILD_SUPER_PARTITION to PRODUCT_USE_DYNAMIC_PARTITIONS, as a
follow-up to the change in [1].
With the CL in [1], it skips building super.img and super_empty.img both
when turning off PRODUCT_BUILD_SUPER_PARTITION. However, the latter
should be mandatory whenever dynamic partitions is enabled. Because
fastboot relies on this file to properly flash dynamic partitions. Plus,
the cost for building super_empty.img is much lower than the one for
super.img.
As part of the change, it'll write group info into target_files when
building with PRODUCT_BUILD_SUPER_PARTITION == false. It's the work for
target_files merging script to determine the values to be picked up. The
current logic in merge_target_files.py always uses the one from vendor
target_files. This CL adds a testcase to ensure the behavior.
[1] https://android-review.googlesource.com/c/platform/build/+/928756
Bug: 135752763
Test: `m dist` with a target that sets PRODUCT_BUILD_SUPER_PARTITION to
false. Check the built artifacts contain super_empty.img. Verify
that the build can be flashed properly.
Change-Id: I277f087eab45663a6c3b33333d16e9e576c1c25c
This allows a consistent logic in using the avbtool which could be
board-specific.
Test: `atest releasetools_test`
Test: Run sign_target_files_apks.py on a target_files.zip.
Change-Id: I8cd93b8e71146985734f85c31f4662f5e2e9534c
This ensures a matching interface between sign_apex and apex_utils.
The test apex `testdata/foo.apex` is generated by running
`system/apex/apexer/runtests.sh`.
Test: python -m unittest test_sign_apex
Test: atest releasetools_test
Change-Id: I7c14b1df2a3038ad206aa3e5aac084c47baaa00b
There are some places defining same file open function and use
common.LoadDictionaryFromLines. This commit creates
LoadDictionaryFromFile to reduce some code redundancy.
Test: m -j & atest passed
Change-Id: I6a3fa48693095937f8c79ce6f3c110b6862a1967
In order to get a Python 2 and 3 compatible re-raise behavior, this CL
removes the stack traceback for the lines within apex_util module (i.e.
sys.exc_info()[2]). It's not a big loss in practice, since we only have
one line within the try-except block (`common.RunAndCheckOutput()`)
that's no longer reported in the traceback.
Using `six` module could better solve this, but only after building
releasetools as python_binary_host modules where we can properly handle
the module dependency.
Bug: 131631303
Test: TreeHugger
Test: `python -m unittest test_apex_utils`
Test: `python3 -m unittest test_apex_utils`
Change-Id: I0c5a72ec9fad5ff9d8c9c94d29e813e433ec2921
sign_target_files_apks.py only needs to take care of the current
release. The legacy paths of ODM/build.prop, VENDOR/odm/build.prop, and
BOOT/RAMDISK/default.prop no longer exist in the target_files.zip from
master.
The other two cases of ROOT/default.prop and
RECOVERY/RAMDISK/default.prop are still kept in the code, as they will
still exist (as symlink or conditionally).
Test: Run sign_target_files_apks.py against
aosp_taimen-target_files.zip. Check the rewritten prop files.
Test: `python -m unittest test_sign_target_files_apks`
Change-Id: I5e70bc2ccc0f3dcf0eace0718c59a3b0f89a9ff4
Python 2 and 3 behave differently when calling ZipFile.writestr() with
zinfo.external_attr being 0. Python 3 uses `0o600 << 16` as the value
for such a case (since
18ee29d0b8),
which seems to make more sense. Otherwise the entry will end up with
0o000 as the permission bits. This CL updates common.ZipWriteStr to
follow the logic in Python 3, in order to get consistent behavior
between using the two versions.
Bug: 131631303
Test: `python -m unittest test_common.CommonZipTest`
Test: `python3 -m unittest test_common.CommonZipTest`
Change-Id: If8429855d922ef1ad76591f703215a0ce5089f0f
Previously it was using regular dict.
Test: python -m unittest test_common.DynamicPartitionsDifferenceTest
Change-Id: If108a4512aeaf9d3c8775c030cad6e44342b9d3d
Previously, setting PRODUCT_BUILD_SUPER_PARTITION to false for a partial
build (with PRODUCT_USE_DYNAMIC_PARTITIONS == true) would fail to
include necessary keys in misc_info.txt that are required when merging
two partial builds to create a dynamic-partition-enabled mixed build.
This change ensures these necessary keys are included even when
PRODUCT_BUILD_SUPER_PARTITION is false. Setting
PRODUCT_BUILD_SUPER_PARTITION to false causes partial builds to skip
building super.img and super_empty.img, instead relying on these images
to come from the final merged build.
Bug: 134764140
Test: Building & booting a dynamic-partition-enabled mixed build, and
inspecting partial builds' logs / out folder to ensure that
super.img/super_empty.img were not created.
Change-Id: I99431a9a342e9b0617510e250597f3024ef39322
common.AVB_VBMETA_PARTITIONS was recently added (commit
08c190fc89) for the same purpose.
Test: TreeHugger
Change-Id: I65572d54c22a753fdef80677377fcc9b684ee16f
merge_target_files.py step.
Bug: 134681035
Test: Built a merged build and ensured that the new timestamp was
visible in the log.
Change-Id: Ia6bbda48c7f57afdb6482253eaf0b3b0ea067468
Also fixes small nit from previous change to write_sorted_data().
Bug: 132788610
Test: python -m unittest test_merge_target_files
Test: Creating and booting a merged build.
Change-Id: I3dc43a4fe55b86b436dec08feb5d70096d38de36
