Modules declare 'vintf_fragments' much like
they declare 'rc_file'. These are verified
in mass during a device build.
Test: `m` can cause verify_vintf_matrices to
pass or fail.
Test: build OTA package and check to make sure it
contains the correct assembled matrices.
Bug: 66917623
Change-Id: I504985100069456a0ca4d0180387d271bb283d49
If a static android library lib1 has LOCAL_STATIC_ANDROID_LIBRARIES
lib2, then the R.class files for packages in lib2 will be merged
into the jar for lib1. If an app has lib1 in its
LOCAL_STATIC_ANDROID_LIBRARIES it will get the R.class files from
lib2 through lib1, instead of regenerating the R.java files with
numbering that matches the resource table of the app.
This was worked around for support libraries by keeping a
fix_dependencies.mk that added transitive static support libraries
to the direct static dependencies of apps. Instead, propagate
the packages that aapt2 generated R.java files for up as
--extra-packages arguments to the next aapt2 invocation, which
will force aapt2 to regenerate the R.java files for those packages.
Bug: 78300023
Test: m checkbuild
Change-Id: I7375e13241b4c4f2933032409fb7935abe133bfc
They should be depended on by specifying LOCAL_SDK_VERSION. Depending
on them directly makes it difficult to rename or modify these targets,
as I've found when working on b/77525052.
This list can be further extended to other libraries that should not
be depended on directly.
Bug: b/77525052
Test: make
Change-Id: I911bcc8a5a90995b3607599388dc6119eb88ea96
During a build, we load product configuration three different times --
to dump some initial variables, when parsing the CleanSpec.mk files, and
again when we parse the Android.mk files.
The BoardConfig.mk find commands use -path, which isn't supported by the
Kati find optimizer, so we end up spending ~125ms in each of the above
cases (on my machine, internal master -- aosp is closer to 30ms).
Instead, do the search during the initial dumping of variables, and pass
in TARGET_DEVICE_DIR into the later runs, using that to load the
BoardConfig.mk file.
Bug: 78020936
Test: out/build-taimen.ninja is identical
Test: out/soong.log shows that we're not running these finds again
Change-Id: I6f186e1879aa362528b48b8a00be3f7a9f88bfc5
This saves ~300ms from get_build_var on our internal tree (1.3s ->
1.0s). On AOSP, it only saves ~60ms (0.60s -> 0.54s).
It's also ran during lunch, and twice during every build (though the
second time it was run with Kati's find emulator, which significantly
reduces the overhead).
Bug: 78020936
Test: diff out/.module_paths/AndroidProducts.mk.list with existing find
results
Change-Id: I195b2840854122e41275e24e886ca8c8cda13dac
find .... -name oem\*.prop
Kati can't emulate this command -- it can't currently handle backslashes
in the middle of an argument, only at the beginning or end. So this
falls back to actually calling find, which can take a few seconds if
you've got a large vendor tree. Just switch all of these over to quoted
arguments instead of escaping the *.
Bug: 78020936
Test: Check out/soong.log for timing info
Test: out/build-taimen.ninja is identical
Change-Id: Ifde75948f677ad95107d9419a462649024f544b8
Files in this partition aren't actually installed, so we don't need to
use the BUILD_PREBUILT logic for APKs.
Bug: 66960479
Test: try PRODUCT_COPY_FILES of an apk into system, errors
Test: try PRODUCT_COPY_FILES of an apk into system_other, accepted
Change-Id: Ie721d2b884c6badfbe0e46f55c265b770bed618b
* changes:
sdk lib name can be in LOCAL_[STATIC_]JAVA_LIBRARIES
java_sdk_library supports test as another API scope
Support LOCAL_SDK_LIBRARIES for "current" builds.
When an sdk lib name (a module defined with java_sdk_library{...}) is
listed in LOCAL_JAVA_LIBRARIES or LOCAL_STATIC_JAVA_LIBRARIES, the name
is translated to the stubs lib name of the sdk lib.
We have to support this at least until all existing references to sdk
libs are all correctly converted to LOCAL_SDK_LIBRARIES.
Bug: 77575606
Test: m -j
Change-Id: I8cff668afd6b5f265cc7ae6fe6f5fa36b76b8334
When a module built with LOCAL_SDK_VERSION := test_current, then
it is linked against test variant of the sdk stubs library.
Bug: 77575606
Test: m -j
Change-Id: I08ce120d8e4774722a95bfc4e200ad7d123abc70
Soong uses lists of proguard flags files from dependencies instead
of a single concatenated file. Allow Soong to pass the list to
make, which will concatenate it.
Move the check inside ifdef LOCAL_SOONG_RESOURCE_EXPORT_PACKAGE
in case Soong exports an Android library with an empty
LOCAL_SOONG_EXPORT_PROGUARD_FLAGS.
Bug: 73724997
Test: m checkbuild
Change-Id: Ia8f229ec5f9fc99a23bd471dfa70c9de7316de94
Resolve these using the naming scheme from sdk_library.go, added
in I4a4ccf6e730e041703c63bb275d8860d0de96887.
Also re-write the LOCAL_SDK_VERSION logic, as it was becoming a
real mess.
Bug: 77575476
Test: With uiautomator in a follow-on CL
Change-Id: I11bd10c02df3d458a4ed6de90114e27fabe8d9e0
* changes:
Pass --dex-location when processing prebuilt profiles
Fix speed-profile compilation for prebuilds
Update profile rules to support binary profiles
The apk name does not match the install location at the stage we are
processing profiles. This causes the wrong profile key to be used in the
final profile which may generate an empty app image.
Test: m; flash, dumpsys dexopt and check for speed-profile
check that the app image is not empty
Bug: 78515726
(cherry picked from commit 60216615f4)
Merged-In: Ic5d71296583be71d96f0e7a2dd59753f1d23c350
Change-Id: Ieb7386701b631d53d452336d1ad22653e4daee42
We were testing the wrong variable when setting the dex2oat flags
Test: m; flash, dumpsys dexopt and check for speed-profile
Bug: 78515726
(cherry picked from commit 7d701355e9)
Merged-In: I57c0e11aab2e4879c3ba3b2851f356b5864f5da9
Change-Id: I2e2f9da1dc9ed71977ec1d698433674c731f78bc
Use full binary profiles instead or relying on text-based profiles. This
makes it easier to import actual profiles and do not require two rounds of
transformation.
Text based profiled probably didn't help too much anyway because if the
apps are updated the proguard names will change.
Modules are still free to define a text based profile using
LOCAL_DEX_PREOPT_PROFILE_CLASS_LISTING. This is used for frameworks jars.
Test: make
Bug: 73313191
(cherry picked from commit f99ab7580f)
Merged-In: Ifd23dde21559fbcd015020905052bc588e275356
Change-Id: I13c6b3891cbf1232f1f07d0a17f019257f7118e6
This reverts commit 2a40cc6996.
Reason for revert: Broke a bunch of builds, platform/system/tools/bpt must be missing from more manifests.
Change-Id: I4c367a1fec5c62c247544227e9d3b596227e31da
* changes:
Write combined bpt definition directly into META/partition-table.bpt
Support regenerating partition table with bpttool in sign_target_files_apks
Don't suppress stderr for 'avbtool make_vbmeta_image'
Include default Android Things AVB keys in otatools.zip
This file has been copied into a 'public' subdir. Use that, so that
the old file can be deleted. Also introduce a new macro to avoid
duplicating this path in a bunch of places.
Bug: 77525052
Test: m checkbuild
Change-Id: Ifcf59c6fb357769b2765e417c8dd56d2ad9b97aa
For Android Things targets (or any other target which has
BOARD_BPT_INPUT_FILES defined), add_img_to_target_files will generate a
partition-table.img using bpttool. It also adds the final combined .bpt
definition file into target-files in IMAGES/partition-table.bpt.
When we're signing using sign_target_files_apks, add_img_to_target_files
needs to regenerate the partition table, but META/misc_info.txt still
contains the original list of bpt input files from the build that aren't
available. This change extracts the final bpt from the input
target-files, adds it to META/ in the output target-files, and then
updates the board_bpt_input_files property to point to it.
Bug: 72837107
Test: Local sign_target_files_apks run of locally built target-files
Change-Id: Id79125208f31c78b1ac2079172f9c91a9203849b
Android Things has an extension on AVB and thus uses different test
keys, along with a public key metadata file. See external/avb/README.md.
Bug: 72837107
Test: Local sign_target_files_apks run of locally built target-files
Change-Id: I769e09a971b9b6b2c9cb0f3272f756b1857eb286
* See upstream status of lld for Mach-O at https://lld.llvm.org/AtomLLD.html
Bug: 73768157
Test: make checkbuild
Change-Id: I20330bd59cc8b3d0ed0fa08d3f1c2be7b8656849
This is a first attempt to enable build system support to include
vndk_package automatically (if BOARD_VNDK_VERSION is set), so devices
don't need to add it via PRODUCT_PACKAGE manually.
Bug: b/67002788
Test: Booted on the x86 emulator and a physical device and checked
their /system/lib*/vndk-* directories for vndk_package libraries.
# The commands below are for the x86 emulator:
$ lunch aosp_x86_64-userdebug; m -j
Change-Id: Iea927b9535c7ee1b64ca130a4ac54f0fd8b3f758
Merged-In: Iea927b9535c7ee1b64ca130a4ac54f0fd8b3f758
(cherry picked from commit 5364f5a298)
Defaults the reserved blocks for root to 0% on read only partitions
(system, system_other, vendor, oem). It also adds support for
explicitly specifying the extfs reserved percentage via
BOARD_{SYSTEM,VENDOR,OEM,PRODUCT}IMAGE_EXTFS_RSV_PCT.
This eventually translates down to the -m option for mkfs.
Removing the reserved space can save at least 5% from the default.
dumpe2fs system:
Reserved blocks uid: 0 (user root)
Reserved blocks gid: 0 (group root)
Bug: 75975085
Test: Build, verify reserved space is changed accordingly
Change-Id: I212d82741908b636db0d658a1c4847bbaadfd5ba
(cherry picked from commit 5ff758799c)
This commit adds ".vendor" suffix to the modules specified in
LOCAL_REQUIRED_MODULES when BOARD_VNDK_VERSION is not empty and it is
building the vendor variant.
Test: Create a vendor module with LOCAL_REQUIRED_MODULES to a
vendor_available shared library.
Change-Id: If448f682572157d0687cda3a72f9bab0f34d7f0d
This directory is getting deleted.
Also remove the variable, the other uses are being removed in this cl:
I1d4e87e7840e979b83779a2aefe176e7c1ed1527
Bug: 77525052
Test: Verified value of last_released_sdk_version variable.
Change-Id: I69b10ad83a8c06d337606df91e8d3b604adfef70
This new variable allows specifying libraries like this:
LOCAL_SDK_VERISON := 25
LOCAL_SDK_LIBRARIES := org.apache.http.legacy,
which would automatically pick up the prebuilt OAHL prebuilt
from prebuilts/sdk/25/public/org.apache.http.legacy.jar
Test: In master with uiautomator.
Bug: 77575476
Change-Id: Id8d92176f5b608c2bcea622b6aed4aa27c32e000
BUG: 74844131
Test: cd bionic/; mm (auto generating the test config in out/)
atest bionic-benchmarks (full testing in atest)
Change-Id: I0497eed876640893d0b82d4cde384d3608cf4875
Pass PLATFORM_VERSION_CODENAME as Platform_sdk_codename, and
set Platform_sdk_final if PLATFORM_VERSION_CODENAME is REL.
Bug: 78224641
Test: m checkbuild
Change-Id: Ic082ca756d877ba51f45e89aa2ac267781a8d854
It was initially introduced in commit
2e735ca34e, where it packs additional
vendor images into target_files zip in order to generate OTAs. We can
acheive the same goal with INSTALLED_RADIOIMAGE_TARGET, which is the way
being actively used across all targets, including IoT (the former
Brillo) targets.
Bug: 78201540
Test: `m dist` with aosp_marlin-userdebug
Test: Code search shows no active user of BRILLO_VENDOR_PARTITIONS.
Test: `python -m unittest test_add_img_to_target_files`
Change-Id: I8803d5377b5a39304a701cceafb243f9a228347d
There are a couple more places throughout the tree that use the old
modules, and I will update those next before deleting the old module
definitions.
Bug: 77525052
Test: make droid
Change-Id: I9385ae34cc1646cbd4e249d9e96a0116296f139a
When USE_CLANG_LLD is true, my_use_clang_lld is true,
and *GLOBAL_LLDFLAGS will be used instead of *GLOBAL_LDFLAGS.
Bug: 73768157
Test: make checkbuild
Change-Id: I2598b72e9edde32f8e57df860571fd107c005540
A test can be disabled in two ways:
1. Add the test name to ALL_DISABLED_PRESUBMIT_TESTS variable.
Integration tests (tests inside TradeFed) can only be disabled in
this way.
2. In module config, set LOCAL_PRESUBMIT_DISABLED to true. This works
for tests with build target.
This change allows tests to be skipped in presubmit check to be saved in
a list that's included in test-mappings.zip build artifact.
Bug: 74971025
Test: m dist -j test-mapping
Change-Id: I6e3016b017ce1ade024dc4ded72a10c778b88e7f
These shouldn't be changed by anyone after this point, and this will
prevent random Android.mk from re-including this file.
Test: m nothing
Test: failed on hikey w/o https://android-review.googlesource.com/662764
Change-Id: I7ba4db3594af5b18b98fafee81b64531a40df396
Merged-In: I7ba4db3594af5b18b98fafee81b64531a40df396
It's not necessary, and all the tools that read this file have been
updated.
Bug: 73959648
Test: cs for uses
Change-Id: Ic203e83ab437beecf07760660f2b3ac7c67e9ded
Merged-In: Ic203e83ab437beecf07760660f2b3ac7c67e9ded
This will work for both R8 and Proguard
Test: m -j Settings && "manually check .../proguard_coniguration file"
Change-Id: I1da7c3426b3511e2d5ad69852da8cec3245d7e54
* Current default is not using lld.
* When USE_CLANG_LLD or LOCAL_USE_CLANG_LLD is true or 1,
* Use *GLOBAL_LLDFLAGS instead of *GLOBAL_LDFLAGS.
GLOBAL_LLDFLAGS should call lld and with correct lld flags.
* set my_pack_module_relocations to false.
Bug: 73768157
Test: make checkbuild
Change-Id: I3e63cf8ae0865d01d2bc1f36e9304f4a5d092cb8
Vendor apks should be able to reference native vendor libraries.
Vendor apks have worked around this by building without
LOCAL_SDK_VERSION, which then allowed to use all libs. However,
since vendor apks now needs to be built with SystemSDK, that
workaround can no longer be used.
Bug: 76398918
Test: BOARD_SYSTEMSDK_VERSION=P m -j
Change-Id: Idb13d5db71f4dfd542658483b6a24e7ece18ce26
This change allows removing some vendor properties from
(vendor|system/vendor)/build.prop file based on a blacklist.
For WearOS Unified Builds, which can change the product name depending on
the chosen locale, we use runtime-generated value for ro.build.fingerprint,
but since the ro.vendor.build.fingerprint cannot be generated the same way,
we always hit a "Mismatched fingerprints" error.
Bug: 71555551
Test: manual
Change-Id: Ifad793187e930a28fbf9325b03468c7ea86076b7
Currently the build system will automatically attribute a NOTICE
file with the target of $(BUILD_PHONY_PACKAGE). This shouldn't
be the case.
Disable notice file inclusion for fake targets so that the
/fake_packages/blah_blah-timestamp paths don't show up in
NOTICE.xml.gz.
Bug: 77910458
Test: NOTICE files are not attributed to fake targets.
Change-Id: Ia942cac41b750efbd5a23d896d85ac0820ee8b4e
There is an extra ) in the implicit output path for R.txt, which causes
the rule to rerun every time because of a missing output file. There
is already an implicit output for R.txt on line 180 (which is why
the incorrect path didn't cause an immediate "No rule to generate R.txt"
error), so just remove the incorrect one.
Bug: 77244156
Test: m checkbuild && m checkbuild
Change-Id: Id960ee211b89a9a5f5104cdcac23bc3124742145
I'm making some changes to it, and found the names are scattered
in various places. Make a macro and re-use the logic instead.
Bug: 77525052
Test: make droid
Change-Id: I0f2da80b8b4d427353509b27ec720d024eee7a6e
Instead of passing the entire contents of
$(COMPATIBILITY.$(suite).FILES) to eval, which may keep that string
around, delay the evaluation of that, and the new files until inside the
eval.
This saves ~2.8GB: 7.4GB -> 4.6GB of ckati max resident memory for a
relatively small internal build. It also saves ~10% of the makefile
loading time (81 -> 73 seconds).
Test: build-aosp_arm.ninja is identical
Change-Id: If45a4796f1bbf6d67dff388ea877a6115a4e06f4
Many boards have warnings like this, saying that we defined a build
rule, but later something else came in and overrode it with something
else:
art/build/Android.gtest.mk:677: warning: overriding commands for target `test-art-target-gtest-cmdline_parser_test'
art/build/Android.gtest.mk:674: warning: ignoring old commands for target `test-art-target-gtest-cmdline_parser_test'
Beyond the obvious problem of replacing the rule with something else,
target-specific variables can be combined as well, leading to some very
strange problems.
Since so many boards still have problems like this, but we don't
currently have any global problems, add a flag so that we can mark
boards as not broken. This should prevent regressions while we clean up
the individual problems.
Once the non-broken devices number significantly more than the broken
devices, we'll switch this default. And once they're all cleaned up this
variable will become obsolete, and these warnings will always be errors.
Bug: 77611511
Test: lunch aosp_arm-eng; m nothing
Test: lunch aosp_marlin-eng; m nothing
Test: build_test on all downstream branches
Change-Id: I43b645658f468c23a5b9ebcfcd9d4516537db540
Our binary was rather old, and for a variety of reasons we haven't kept
it updated. We've been running into a handful of reliability issues that
would have been fixed with an update, and a few reproducibility /
correctness issues that may or may not be fixed with newer versions.
For local no-change full rebuilds, ccache can still save ~35% of the
build time (but adds a few minutes to initially populate the cache). But
most local uses should be using incremental builds anyways, not clean
rebuilds. Or you're doing builds of different configurations, which
wouldn't be cache hits either, and would make your cache even larger.
At a large scale, we haven't seen a significant performance difference
between having ccache on or off. This may be different if you've got
very good build locality, or a very large cache -- but if you've got
good build locality, it's reasonable to do incremental builds (not for
release builds, and while running `m installclean` in between builds).
So for our cases, we'd prefer the stability and correctness of not using
ccache, but if you still want to use ccache, continue setting USE_CCACHE
and also set CCACHE_EXEC to the path of your ccache executable.
Bug: 32748498
Bug: 72408185
Test: performance testing of USE_CCACHE=false vs true locally
Test: turned off ccache for a collection of targets
Test: CCACHE_EXEC=/usr/bin/ccache USE_CCACHE=true m
Change-Id: I7117fe3107bd98521051ae343038a38f7e855502
LOCAL_VINTF_FRAGMENTS/vintf_fragments are
used to specify what manifest fragments should be installed
by a target.
Test: fragments get installed to the right location
Test: broken fragment gets detected
Test: boot device and verify service is working and manifest is updated
Test: verify OTA package contains fragments
Bug: 66917623
Change-Id: I21abe65a31b8c3d255c8ccd80e102ff3acb23105
Start deprecating add_lunch_combo, preferring a list of common choices
in each AndroidProducts.mk file.
This list will be validated so that we don't have typos:
https://android-review.git.corp.google.com/c/device/generic/car/+/619533
Or targets that no longer exist.
Bug: 77599627
Test: lunch
Test: lunch 34
Test: lunch aosp_x86_64-eng
Test: lunch aosp_<tab>
Change-Id: Ie0ddaa94cbd6cee26584f56f1706a8ec1333f87e
The function along with LOCAL_TEST_DATA are very helpful, but it took me
some extra minutes to figure out the issue with the arguments.
Test: N/A
Change-Id: I2c2878fca99ab77ea881d86635c27c34f9ecf855
This is a list of modules which should be installed by default, but only on
builds which are set up for Address Sanitizer (via SANITIZE_TARGET=address).
Additionally, add sanitizer-status to PRODUCT_PACKAGES_DEBUG so that all
userdebug builds will have the binary. Currently, the module has the
"debug" tag but it may go away in the future.
Change-Id: I0bea4faf9c2a65380292471437e51ef8324b5af3
Normally, when building with VNDK, platform modules are not allowed to
link against vendor libraries, because the ABI of the vendor libraries
are not guaranteed to be stable and may differ across multiple vendor
images.
However, the vendor public libraries are the exceptions. Vendor public
libraries are vendor libraries that are exposed to 3rd party apps and
listed in /vendor/etc/public.libraries.txt. Since they are intended to
be exposed to public, their ABI stability is guaranteed (by definition,
though it is up to the vendor to actually guarantee it).
This change allows platform modules to link to vendor public libraries.
When the name of a vendor public libraries (whose stub is defined via
vendor_public_library in Android.bp) is listed in
LOCAL_SHARED_LIBRARIES, it is actually linked to the stub library which
is available to platform modules.
Bug: 74275385
Test: m -j
Change-Id: I063b43431196190b59332b1bcad59f267073f89f
This CL changes PRODUCT_CFI_INCLUDE_PATHS to be included in all
product configs by default. To maintain the status quo, the sanitizer
logic has been modified to only respect this product config for Arm64
devices (where this was previously enabled).
Bug: 63926619
Test: m -j60 # the device still has CFI enabled thanks to the default
opt-in
Change-Id: I22788d92be881d3290568488f5458c85e02ee8c7
If there are no symbols to keep (i.e. all function symbols are also in
the dynsym table), then the $@.keep_symbols file has size 0.
When objcopy parses a --keep-symbols file, it has a special case for
0-sized files where it silently fails (exits with status 1, no error
message). On the other hand, objcopy is happy with a file containing no
symbols, as long as there is some whitespace or a comment. Avoid the
special case by appending a newline to keep_symbols.
Bug: b/62815515
Bug: b/77242617
Test: manual
Change-Id: I348593164fe78ece5c85db3d28c7daccce3a52fb
AUX modules are not necessarily using the same toolchain
as the TARGET modules. they don't have to depend on
this library.
Change-Id: Ib50cf0eb26c257ae3eb69a43aa1a12c41d5d39b0
Signed-off-by: Alexey Polyudov <apolyudov@google.com>
This variable is equal to the sepolicy version for tip-of-tree development.
Bug: 74622750
Test: ./build/soong/soong_ui.bash --dumpvars-mode -vars PLATFORM_SEPOLICY_VERSION
is unchanged.
Change-Id: I2a62f7399fe245ec0c681e9a789da6b1b83dd9d8
When BOARD_SYSTEMSDK_VERSIONS is set, any apk in the vendor partition
is force built against SystemSDK (or Android SDK if LOCAL_SDK_VERSION is
set to current). However, there should be one exception to this: RRO for
framework-res.apk. This is because the RRO is currently overriding
resources that are not part of SystemSDK. Until SystemSDK is expanded to
cover resources that are eligible for overriding, let's allow the direct
dependency from RRO to framework-res.apk.
Bug: 35859726
Bug: 76398918
Test: m -j
Merged-In: Ib9981b107d78691eef21f4525ebdac9866d5c50e
Change-Id: Ib9981b107d78691eef21f4525ebdac9866d5c50e
(cherry picked from commit d8c4c30ba4)
javadoc expects directories on the sourcepath, not jar files.
The original commit 88b607994a
in 2009 was already passing the jar files, and every revision
since then seems to have kept this habit through cargo cult.
This CL removes the superfluous jar file arguments from the
sourcepath argument to javadoc.
Test: Treehugger
Bug: 76436487
Change-Id: I44b4b8ba248ad4deafbb6462e6f7398f15bd2845
When building vendor modules with BOARD_VNDK_VERSION=current, the
API of the vendor modules will be current PLATFORM_VNDK_VERSION.
__ANDROID_API_FUTURE__ will be used as before if the version is a
CODENAME.
If BOARD_VNDK_VERSION is not "current", that means the VNDK version
of the vendor modules is BOARD_VNDK_VERSION.
Bug: 74833244
Test: Build and check boot.
Change-Id: Iccc603f1b5ffa066e74ba1357f3fbbcc13c58f76
Non-A/B devices need to include the DTBO image
within the recovery partition to be self-sufficient
and prevent OTA failures.
Test: Ran 'm dist' and verified that the DTBO image
was included in recovery.img using unpack_bootimg.
Also ran 'make' and verified that the DTBO image was
included in recovery.img using unpack_bootimg.
Also tested that aosp_angler-userdebug could
boot into recovery(including a fake dtbo.img
in recovery image).
Bug: 74763691
Change-Id: I38c9c395c95d21f4da42cfa646063bd4416f6bd8
With project Treble, it's possible to only update system.img across
Android major releases without changing other partitions. However,
for non-A/B devices, ramdisk cannot be updated via a system-only OTA
because it resides in /boot partition.
This leads to two major incompatibility issues:
- The older /init in ramdisk might not be able to parse the *.rc files
on /system.
- The ramdisk contains /init.rc, which also may be out of date compared to
what is required for the new /system.
Therefore, for new devices launched in P with full Treble support, ramdisk
should be merged into system.img by setting
BOARD_BUILD_SYSTEM_ROOT_IMAGE := True.
Upgrading devices can keep using non-system-as-root configuration.
Bug: 64194858
Test: manual makefile prodding
Change-Id: Ic04c63bd2aac3afa686a6f5cb124beebbcd6a5ee
Add PRODUCT_OTHER_JAVA_DEBUG_INFO similar to PRODUCT_SYSTEM_SERVER_DEBUG_INFO.
Use WITH_DEXPREOPT_DEBUG_INFO as global default, and allow the product
to opt out by setting the above to "false."
Bug: 75259124
Test: m
Change-Id: Id4a2e5d00a1b73a7e7a0a65146042c0aa0c1b411
This allows the integer_overflow LOCAL_SANITIZE setting to be used with
static targets, to mirror Soong.
Bug: 73283972
Test: make SANITIZE_TARGET{,_DIAG}=integer_overflow
Test: Enabled sanitizer in a static target and tested for SIGABRT.
Change-Id: I0103dc3485b63b86a3dd36a7277b5001813b37fd
build_image.py used to invoke build_verity_metadata.py with a hard-coded
path of 'system/extras/verity/build_verity_metadata.py', which makes it
hard to run unittests from non-$(ANDROID_BUILD_TOP) directory.
This CL adds the dependency on the tool, so that it gets installed to
$(HOST_OUT_EXECUTABLES), then removes the hard-coded path.
Bug: 74544459
Bug: 76015688
Test: `m dist`
Test: python -m unittest test_validate_target_files
Change-Id: I0dcf4eb067a0db6f099cb589eb99a151a05c7f2b
* changes:
Add asan-specific CleanSpec
Use a srcjar for aapt and aapt2 output
Move R.txt and make aapt2 generate it
Move aapt2.mk before java.mk
Remove redundant renderscript_target_api computation
Move java renderscript support to java_renderscript.mk
Use srcjar and resource zip as output of renderscript rules
Dumping files in the *_intermediates/src causes incremental build
problems, because we don't know when to delete them if they are
no longer generated. Switch to outputting a srcjar instead, and
pass it in to the turbine and javac compiles.
Bug: 73885582
Test: m checkbuild
Change-Id: Ibef28507522339d930c09426d0c98372eb864cb6
Merged-In: Ibef28507522339d930c09426d0c98372eb864cb6
(cherry picked from commit 2d1cddd567)
Move R.txt from $(intermediates.COMMON)/src to $(intermediates.COMMON)
in preparation for moving aapt/aapt2 java files out of src. Also
make aapt2 generate R.txt, and make it an implicit output of the rule
and and input to the aar rule.
Bug: 73885582
Test: m out/target/common/obj/JAVA_LIBRARIES/SettingsLib_intermediates/javalib.aar
Test: m checkbuild
Change-Id: Ia858de226355965b69794c002f841333df16a612
Merged-In: Ia858de226355965b69794c002f841333df16a612
(cherry picked from commit 7c24f8ec85)
aapt2.mk will export a srcjar that will be compiled by java.mk, so
it needs to be evaluated first. Also move java_renderscript.mk
before aapt2.mk so that the generated resoures are available.
Bug: 73885582
Test: m checkbuild
Test: rm -rf out/target/common/obj/APPS/RsHelloCompute_intermediates &&
m out/target/common/obj/APPS/RsHelloCompute_intermediates/src/R.stamp
Change-Id: Ide3050ec993a945f7077b75e952c3b3532306ede
Merged-In: Ide3050ec993a945f7077b75e952c3b3532306ede
(cherry picked from commit 8528eabbba)
renderscript_target_api is set by java_renderscript.mk, it doesn't
need to be computed again in static_java_library.mk and
package_internal.mk.
Bug: 73885582
Test: no change to ninja file
Change-Id: Ib6e00be425c385f4911def19ed5042a740f2c79b
Merged-In: Ib6e00be425c385f4911def19ed5042a740f2c79b
(cherry picked from commit 55cce23360)
Move java renderscript support to java_renderscript.mk in
preparation to moving it before aapt. Filter *.rs files
out of LOCAL_SRC_FILES and forbid them in java_common.mk
so that using *.rs files is an error if java_renderscript.mk
was not included.
Bug: 73885582
Test: m checkbuild
Change-Id: Ib37ce89daee58b025dec98f733c5a08149641afd
Merged-In: Ib37ce89daee58b025dec98f733c5a08149641afd
(cherry picked from commit 71822d6fb9)
Replace RenderScript.stamp with a srcjar, with a resource zip as
an implicit output. This makes the renderscript rules self contained,
which will make it easier to move them before aapt.
Bug: 73885582
Test: m checkbuild
Change-Id: I12d33e52019aebac6ea33271939228e4690a4173
Merged-In: I12d33e52019aebac6ea33271939228e4690a4173
(cherry picked from commit e00e2fae52)
Old droiddoc will install the *-docs.zip & API files to the dist.
And also remove INTERNAL_PLATFORM_*API_FILE variables from config.mk and
get rid of the dependencies on api-stubs, system-api-stubs, test-api-stubs
timestamp.
Test: m -j api-stubs-docs
Bug: b/70351683
Change-Id: I08923bb5f62d2f55961d9a2865723d7b3fae7206
Merged-In: I08923bb5f62d2f55961d9a2865723d7b3fae7206
Tradefed depends on Loganalysis so it should also be part
of cts. Luckily there was no overlap (cts never called a
part of TF that use loganalysis) so it never failed
with classNotFound before.
Test: build cts
Bug: 75979908
Change-Id: I2542ecd077149f7165aff120d67054943df20b54
This CL handles a path that uses system-root-image on non-A/B device.
For this path, we can't generate recovery-from-boot patch with imgdiff,
because boot/recovery images contain different number of entries (only
recovery iamge has ramdisk image now).
Using BOARD_USES_FULL_RECOVERY_IMAGE can work around the issue, at the
cost of extra size. Compared to carrying full recovery image, this CL
saves the cost of the kernel size, by putting a patch that's roughly the
size of the recovery ramdisk.
The applypatch executable already detects and handles a bsdiff patch
automatically. No change required to that end.
Note that it won't further reduce the patch size by handling that
ramdisk entry specially, because (a) that's the only difference between
the two images; and (b) there's no corresponding data in boot image to
be diff'd against.
Bug: 72731506
Test: `m dist` with aosp_angler-userdebug. Check the device can install
recovery image successfully (after intentionally corrupting the
recovery image).
Test: Build aosp_angler-userdebug with BOARD_BUILD_SYSTEM_ROOT_IMAGE set.
Verify the generated patch files.
Test: Run validate_target_files.py with the target_files.zips.
Change-Id: I69c06f51ba8c39ae059c5e9a6872a9f10600cf17
If HOST_CROSS_OUT_TESTCASES is not defined, then a module that
builds for windows and has a test config will attempt to install
the config file to /<module>/<module>.config.
Fixes:
[ 54% 99/183] Copy: /simpleperf_unit_test/x86/simpleperf_unit_test.exeninja: error: mkdir(/simpleperf_unit_test): Permission denied
Test: m simpleperf_unit_test
Change-Id: I07dcecbce9c710b29fec5fbdedc462be3245b578
This time around we're really deprecating the 32-bit
binder interface (v7), even for 32-bit devices.
Upgrading devices can keep using it.
Bug: 69775513
Test: manual makefile prodding
Change-Id: I3850418ca267e72593f5f12b940e5382b29b024a
Merged-In: I3850418ca267e72593f5f12b940e5382b29b024a
Use zipsync instead of extract_srcjars.sh.
Also fixes an issue where unzipping a resource zip would
ignore anything that wasn't a *.java file.
Bug: 73885582
Test: m checkbuild
Change-Id: I1c25f65afa196614879071c8655866febebac185
Some javac and turbine compiles have no source files but sources
from srcjars. Continue with compilation if the java source list
is empty but the srcjar source list is not.
Bug: 73885582
Test: m checkbuild
Change-Id: Ica412de2dd1b1bfc12c01c3eafca884220d42771
The latest version of turbine requires a -- after the javac
options, and uses multiple --bootclasspath arguments instead
of a javac-style colon separated list.
Test: m javac-check
Bug: 74339924
Change-Id: I3f694ac375eab61954d4fe63c1166a18314bf75f
* changes:
Allow aapt2 rules to take zipped resource files
Add LOCAL_SRCJARS support
Remove unused .fs file suppport
Remove unused file lists
Remove sharding support from make
Move aapt flags from java_common.mk to aapt_flags.mk
Allow aapt2 rules to take zipped resource files similar to the
way the javac rules take srcjars. For now, unzip the files using
extract_srcjars.sh, and then use aapt2 compile --dir. Eventually
it could be done with aapt2 compile --zip.
Bug: 73885582
Bug: 74574557
Test: m checkbuild
Change-Id: I97ea3ff305e7a9ef2a908b4cf0bca903af62c6b1
Fixed bugs which was discovered in the last attempt.
Bug: 74508478
Test: m -j PRODUCT-taimen-userdebug
Test: m -j PRODUCT-elfin-userdebug
Test: Check that some .vdex files built have R8 generated code
(cherry picked from commit a3b796d998)
Change-Id: Ibe08137cd6db94b1fc487267e169d3f5ee598846
Merged-In: I2a8e0e5cad1d698ae73ba152e34a08a496112d7d
Allow java modules to take jars containing .java files as an input.
For turbine, pass them directly to turbine. For javac, extract them
to a directory and pass a list of the files to javac.
Bug: 73885582
Test: m checkbuild
Change-Id: Ib4351a5b4b165a55e5fb02ee2680466db368983a
RS_FILES and AIDL_FILES were used for cleaning up the intermediate
src dir, but are no longer used after
If7529979de6fa62a651933a3a974f47b033851d6 and
I01feff7cc399ac5b88b83333a1ac86928d0a81e6.
Bug: 73885582
Test: m checkbuild
Change-Id: If2653f846b568fd2587c8e055ef820e17760f133
Sharding is not used in make any more, the large java modules
(libcore and framework) have moved to Soong. Keeping sharding
support complicates java compiling, so remove it.
Bug: 73885582
Test: m checkbuild
Change-Id: I2932f9e96bfc8f2ebf82095b16d6c0b3c51613f0
The aapt flags were being set in java_common.mk, which is used by
various entry points. host_dalvik_java_library.mk and
host_java_library.mk, and java_library.mk don't support aapt, only
package_internal.mk and static_java_library.mk do. Move the aapt
flags into aapt_flags.mk, and include it from package_internal.mk
and static_java_library.mk.
Bug: 73885582
Test: no change to build-${TARGET_PRODUCT}.ninja
Change-Id: I124393846d37b9bbc941272cce4274121ac235ef
Setting LOCAL_AAPT_NAMESPACES := true enables
namespaces for an app and requires any library resources
to be fully qualified by their package.
Test: manual
Bug: 73885582
Change-Id: Ia6bfc82ee8b8d6335f8e7c2abe94ce36467a012d
Merged-In: Ia6bfc82ee8b8d6335f8e7c2abe94ce36467a012d
For APCT auto-generated configuration, the template will
include the test-suite-tag that will allow it to be
picked up automatically.
Test: none
Bug: 74440293
Change-Id: Ia82e8287f212f4daec97523394517bfbbe7a86d3
There isn't an Address Sanitizer prebuilt of xz, so always use the same
xz prebuilt.
Bug: 36130900
Test: SANITIZE_HOST=address m nothing; check ninja file
Test: m libc
Change-Id: Iba3599d4289ad5afb573dbec5ac8fc463668b1c6
Pre-extracting the zip files are more sustainable for git, so that
objects can be shared if unchanged, rather than the 900MB zip file
changing on every build.
This also has the advantage that we could put an Android.bp file inside
the PDK, and Soong would just pick it up.
Bug: 68767391
Test: Build mini_arm64 PDK with platform.zip
Test: Build mini_arm64 PDK with extracted zip file
Change-Id: I16db030a731aea55b69c1d6e2260dbd70b167544
All apps in master comply with this now, but new offenders
are being added daily. This will ensure compliance going
forward.
Test: build/soong/build_test.bash
Bug: 73535841
Change-Id: If28049750a9787bf455f72402e624dbddf842253
Modules from Soong do not have dependency specified (via
LOCAL_JAVA_LIBRARIES). So, link-type check 'from' them doesn't make
sense. Resetting my_warn_types and my_allowed_types
Bug: 69899800
Test: m -j checkbuild on aosp_walleye, aosp_sailfish
Test: build/soong/build_test.bash --dist
Change-Id: I2a409e64f388bd8cb9336be589bf6af33e48a6f4
This prevents cases where system_server is running in interpreter
only mode.
Removed unused flag in product.mk
(cherry-picked from commit 27f4287406)
Bug: 74209329
Test: WITH_DEXPREOPT=false make
Merged-In: I4ab3afed95a5baf77d0cd089dafaa18bcc1913e5
Change-Id: I4ab3afed95a5baf77d0cd089dafaa18bcc1913e5
Not all native tests have the "tests" tag so adjust the logic to be:
NATIVE_TESTS||NATIVE_BENCHMARKS||(APPS&&tags==tests)
Bug: 74339384
Test: Rebuilt module-info.json, verified native tests now have
their suite set to null-suite and have auto_test_config=True
Double checked a frameworks App unittest as well.
Change-Id: Idea00adcebfc1a78b0c6d8ade40feddb1e90ed83
PRODUCT_AAPT_FLAGS was removed by Iacc914114616b5bd19d9a1011802f4f9bca9bc19,
remove one more that it missed.
Test: m checkbuild
Change-Id: I31ea4954f5af5af37f13210925ed5d622625d71b
Silence warnings when merging header jars that were missed by
Ifb67dbf7734b5f53941d110f578c4fe642e36005.
Bug: 69316739
Test: m checkbuild
Change-Id: I5cfea62e46d99f9b315a589d8915bf62307220aa
framework_res_package_export is now always either the prebuilt
android.jar from an SDK or a package-export.apk generated by
Soong, so the dependency on R.stamp is never useful. Remove
all assignments to framework_res_package_export_deps, and replace
usages with frameworks_res_package_export.
Test: m checkbuild
Change-Id: If484e9eb08061cb0ed0697755f13db71d741aaab
This reverts commit 86a596c711.
Reverting as that commit breaks ART tests' results (see
b/73804944).
Test: m test-art-host
Bug: 73804944
Bug: 26275726
Change-Id: I06af4b170d845d3e55e044c28ec22d4b3ca3dede
Adds Make support for -fsanitze-minimal-runtime when using
the integer overflow sanitizers. This makes the crashes due to these
sanitizers less mysterious. This also cleans up the handling of the
integer_overflow flag.
Bug: 64091660
Test: Compiled and checked the generated compiler commands
Test: Checked program that overflows for the abort reason
Test: Checked integer_overflow flag still emits overflow checks
Change-Id: I11012ed0cbbf51935f549a08bd17109b5ce6f330
if BOARD_BUILD_SYSTEM_ROOT_IMAGE != true: # case A
- BOOT/RAMDISK corresponds to the / under normal boot, with matching
fs_config in META/boot_filesystem_config.txt.
- RECOVERY/RAMDISK corresponds to the / under recovery, with fs_config
in META/recovery_filesystem_config.txt.
else:
if BOARD_USES_RECOVERY_AS_BOOT == true: # case B
- ROOT/ corresponds to the / under normal boot, with fs_config in
META/root_filesystem_config.txt.
- BOOT/RAMDISK corresponds to the / under recovery, with fs_config
in META/boot_filesystem_config.txt.
else: # case C
- ROOT/ corresponds to the / under normal boot, with fs_config in
META/root_filesystem_config.txt.
- RECOVERY/RAMDISK corresponds to the / under recovery, with fs_config
in META/recovery_filesystem_config.txt.
- BOOT/RAMDISK doesn't exist.
This CL fixes case C, where we shouldn't try to generate
'META/boot_filesystem_config.txt' for BOOT/RAMDISK. It wouldn't be fatal
without this fix, but would wrongly scan the current directory and
include a large fs_config output into target-files.zip.
Bug: 72731506
Test: `lunch aosp_bullhead-userdebug` and `m dist`. (case A)
Test: `lunch aosp_marlin-userdebug` and `m dist`. (case B)
Test: Define 'BOARD_BUILD_SYSTEM_ROOT_IMAGE := true' for angler. `m
dist` and check the generated target-files.zip. (case C)
Change-Id: I5582ce8cca464d535af0718be0fd8e65791bd6c2
Typical failure case for boot image dex2oat is an inconsistent boot
classpath left over from incomplete build dependencies. Give advice
to run a top-level build.
Bug: 73749543
Test: m
Change-Id: I81c4ce9d02b2b360fe867b594d0a2b21c763e473
Factor out ANDROID_LOG_TAGS for boot image compilation. Do not use
the setting when ART_BOOT_IMAGE_EXTRA_ARGS is set.
Bug: 73749543
Test: m
Test: ART_BOOT_IMAGE_EXTRA_ARGS="--runtime-arg -verbose:verifier" m art-boot-image
Change-Id: Ia599381991f74f243fee966184715b0172742e78
I plan on turning the error on for APPS in AOSP soon, and in preparation for
that I'm introducing a finer granularity of warning/error control.
Also add an almost-empty whitelist, which will likely need to be expanded
in the future.
Bug: 73535841
Test: make
Change-Id: I2fc6700a504b7af50aa7bde727047bc56b167937
$(OUT_DIR)/target/product/$(TARGET_DEVICE)/lsdump_paths.txt will contain all
.lsdump paths relative to $(ANDROID_BUILD_TOP). This helps faster lookup while
running scripts to generate reference dumps.
Test: m -j findlsdumps for aosp_arm64_ab.
$OUT_DIR/lsdump_paths/generic_arm64_ab/paths.txt has paths to lsdump files
generated for the build.
Test: m -j findlsdumps for aosp_arm_ab.
$OUT_DIR/target/product/generic_arm_ab/lsump_paths.txt has paths to
lsdump files generated for the build.
Change-Id: Iab1640f57bf9d0af5e88e6dda64a610fedcbe87e
Bug: 72552006
Test: Make a module with no source files,
run `m -j nothing`, notice that the error tells
which module has no sources
Change-Id: Ib169e7b3cb86d840a3acd644e42cd1f9f65e1304
If there's a prebuilt with LOCAL_MULTILIB := true, but only a single
LOCAL_SRC_FILES entry, we end up with a weird build error where `cp`
is trying to copy the local directory. Exit early with an error in this
case.
Bug: 73904572
Test: build-aosp_marlin.ninja is identical
Change-Id: Ie2821817c237087a96e87fb9602e430e0f86584a
Instead of relying on whatever version of xmllint is on the host system,
build and use the version in external/libxml2.
Test: diff build_aosp-marlin.ninja, expected changes.
Test: m $(xmllint targets in build_aosp-marlin.ninja)
Test: introduce xml error, build fails
Change-Id: I39579f06db3777e3b5c8dda7c7541c25a35887b2
Before this CL, the build could fail with error messages such as:
Error: out/target/common/obj/JAVA_LIBRARIES/core-oj_intermediates/classes.jar
contains class file jdk/internal/HotSpotIntrinsicCandidate.class, which is not
in the whitelist
This error message was only moderately helpful because it left a few
questions unanswered or misled ("Whitelist for what?", "Where does the
whitelist live?", "Is it a whitelist of class files or of packages?").
This CL clarifies that:
- it's a whitelist of packages allowed on the bootclasspath,
- where it lives (currently
build/make/core/tasks/check_boot_jars/package_whitelist.txt)
which makes the error message more actionable.
Test: manually checked that the error message now looks okay.
Bug: 17434570
Change-Id: I2f52a5e2eb532bc4945bedf9811de5857f67a9a3
<Two phase commits> Since internal master code has more places that use
BUILD_NUMBER (mostly in vendor/) than AOSP (conflict). We can't
deprecate BUILD_NUMBER directly. Therefore, we try to switch to
BUILD_NUMBER_FROM_FILE as much as possible at first. Then we will do
a one-off deprecation for BUILD_NUMBER in internal master next step.
Test: m -j
Bug: b/70351683
Change-Id: I14ffee7381933c9fde14c4bde8c0c14e45fe98bf
Added product property: PRODUCT_DEX_PREOPT_GENERATE_DM_FILES.
If this property is true, APKs compiled as verify will have the dex
files left compressed and the vdex put in a dm file. The vdex file
and oat files are not copied to system partition in this case.
Bug: 70934104
Test: manual
Change-Id: Ie137e14f14642b803a506162de6db8ac65a43f46
The only enforcement right now is that modules don't specify both
LOCAL_SDK_VERSION and LOCAL_PRIVATE_PLATFORM_APIS, but a warning
can be turned on by setting the JAVA_SDK_ENFORCEMENT_WARNING variable.
Bug: 73535841
Test: make w/ and wo/ flag.
Change-Id: I3cc720bf060e2bc789e10884ff888d527b91cb50
Change Ibe4ceb1b224c5e8f3e1a8a59cfee89217765a901 caused kati to
regenerate on every build:
$(shell cat out/build_date.txt) was changed, regenerating...
Switch back to $(shell date +%s) which is special cased in kati
to not cause a regeneration. Everything besides DATE will still
use BUILD_DATETIME_FROM_FILE from soong_ui.
Once BUILD_NUMBER is moved to soong_ui $(DATE) is no longer
necessary and the whole thing can be removed.
Bug: 70351683
Bug: 73352417
Test: m && m doesn't regenerate
Test: m BUILD_DATETIME=1234 shows up in ro.build.version.incremental
Change-Id: I8444beb2b47a49095ef760083fc85f220821bffe
LOCAL_RES_LIBRARIES and LOCAL_APK_LIBRARIES should still be honored.
Test: make CtsDevicePrereleaseSdkApp
Change-Id: I3360d0fe2f7e2f3038e48f41905923a72609ceec
export Android.mk config vars to Soong, and export stubs.jar to Make
after compiling Droiddoc from Soong.
Bug: b/70351683
Test: Convert libcore docs Android.mk to Soong manually.
Change-Id: I749b4b3e1e50abce8a757130987c18d7135a3859
Move application of module flags to host_java_library_common.mk
so that dalvik host builds can also have flags.
Bug: 72451126
Test: m javac-check RUN_ERROR_PRONE=true
Change-Id: Idbf43afd886536cc7ea674aa4487da3c22987850
* Use the definitions of ClangDefaultBase and ClangDefaultVersion
in build/soong/cc/config/global.go.
* scan-build is too old;
replaced by better clang-tidy's -clang-analyzer-* checks.
* WITH_STATIC_ANALYZER is still effective
to invoke ccc-analyzer or c++-analyzer.
Test: make checkbuild
Change-Id: Ifd159dd28e529d5d3c9807f5e391911365da8cdb
There are too many duplicates warnings, disable them until someone
is actually looking at them.
Bug: 69316739
Test: m checkbuild
Change-Id: Ifb67dbf7734b5f53941d110f578c4fe642e36005
When LOCAL_NO_STANDARD_LIBRARIES is set to true, droiddoc only omits
framework libraries from the required libs. This enables us to use
droiddoc even when frameworks/base is absent (i.e. master-art branch).
Test: m -j core.current.stubs
Test: build in master-art branch
Change-Id: Ia9f0b8bda84b006881b3e62e6573a7784ca56a8c
patchoat was already ignoring the basename part of the filename passed
to it for both --output-image-file and --output-image-relocation-file.
We can therefore just pass in the directories instead.
Bug: 72828459
Test: make test-art-host-gtest-patchoat_test
Change-Id: I50f2e19fec1fd27433d3e6ec82df0cfb04c43f21
This variable can be set in BoardConfig.mk to specify a list of
additional paths that contain PGO profiles. These directories are
searched before the predefined paths in soong/cc/pgo.go while finding
PGO profiles.
Test: Set this variable in a BoardConfig and verify that such profiles
are found and that these paths are searched before the predefined paths
in soong/cc/pgo.go.
Change-Id: Ied3ebf0ce6e6e2ead57f4828998e9617424e4573
Create only one vdex file and share between different ISAs.
By sharing vdex file, zygote32 and zygote64 can share the same file and
the system partition size is reduced by about 32MB.
Test: make framework & check boot.vdex and boot-*.vdex files
Test: test system boots with no selinux violations
Bug: 64211239
Change-Id: I31ede4b6aa342f2047d9309b8c631217e6699202
This reverts commit 30d6869faf.
Fixes an issue with the original change where proguard files without
newlines at the end of the file would get merged with the next file.
Most of the time the next file started with a comment, which worked
fine, but sometimes it was a syntax error.
Bug: 72969557
Test: m
Test: build on an internal tree that failed last time
Change-Id: I66f13ae80ee0f96b456e526bfbfc2cdcf82c3f3a
The art targets don't check MAKECMDGOALS any more, remove them
from PARSE_TIME_MAKE_GOALS.
Bug: 26275726
Test: m clean-oat
Test: m test-art-host-run-test-dependencies
Change-Id: I75869495c91f142bf8eff681e6e764c9b0464031
So they can be used by art/test/Android.run-test.mk.
Also remove the line wrapping, which was inserting extra characters
at the beginning of the result, and add a sanity check.
Bug: 26275726
Test: no change to out/build-hikey960-test-art.ninja
Change-Id: I35b54c258a1dc76bb1a8a758ec4a08915a2b226d
