Warning messages like, "libart_fake: framework library must be installed
to system/lib64 but requested to be installed at system/fake-libs64.
Please fix.", are temporarily muted since some of those warnings might
be false alarms.
Let's just silence the warning for everybody and investigate the cases
internally by turning on the build flag SHOW_MODULE_PATH_WARNINGS.
Test: the warning messages should not be shown unless built with
SHOW_MODULE_PATH_WARNINGS=true.
Change-Id: I5eb3ab3385c92a5192723ff1008277c321162191
This file is no longer needed because it was needed for supporting
reloadable/dynamic SELinux policy which is no longer supported.
Test: Clean build, flash, device boots without additional denials.
Reboot to recovery works, no additional denials.
Bug: 33642277
Change-Id: Ie65e74b8c8437694bc1ea019ab844f60f9e89ade
Compute PLATFORM_VERSION and PLATFORM_VERSION_CODENAME from
TARGET_PLATFORM_VERSION. Add explicit values for O, even though
they are the same as the fall backs, as placeholders for future
values.
Bug: 35445510
Test: manual
Merged-In: I30a7142f732c85b637d2ce072373bc867cedcd42
Change-Id: I30a7142f732c85b637d2ce072373bc867cedcd42
Using ; to join commands in a rule causes failures to be ignored by
make. Use && instead, and add true at the end as the second operand
to the last && operator.
Also inline copy-test-in-batch, batching is no longer necessary as
kati will fall back to a shell script if the recipe is too long to
fit in a command line.
Test: builds
Change-Id: I4a2528bf2a15106cfabaae0336662c4a0464271d
/file_contexts.bin is needed only by devices which do not have
PRODUCT_FULL_TREBLE set to true. Adding this file to devices which
have PRODUCT_FULL_TREBLE set to true causes confusion and wastes
about 800 kB of space.
/file_contexts.bin was being added unconditionally to all devices due
to the build system needing the combined file_contexts file for
host-side labelling of filesystems in images and for inclusion into
target files ZIP (again, to be used for host-side labelling later).
This change switches these targets to depend on the same file, but
from intermediates directory. As a result, everything continues to
work just fine, but without pulling in /file_contexts.bin. On devices
which need /file_contexts.bin, it is pulled in by
system/core/init/Android.mk.
Test: /file_contexts.bin still there on bullhead, but not there on
sailfish with PRODUCT_FULL_TREBLE set to true.
Test: Clean build, device boots up with, no new denials.
Reboot to recovery, recovery boots up fine too, no denials.
This was tested on sailfish-eng and marlin-eng.
Bug: 36002414
Change-Id: I9bbbb08bbf7d874bba0bafcc19bcbf9eec564326
This makes recoveryimage/bootimage targets explicitly depend on SELinux
policy artifacts needed by recovery. Prior to this change, the
dependency was contrived: these targets would rely on copying these
files from "root" directory, and then overwriting sepolicy file with
sepolicy.recovery.
Test: Clean build, flash, device boots up just fine. No new denials.
Reboot into recovery, recovery boot up just fine, no denials.
This was tested on bullhead (non A/B device) and sailfish (A/B
device).
Bug: 33642277
Change-Id: Id2369253d0c7e02e079ae01ac7140b41880fd5ad
Shared libraries are now installed to different directories depending on
their types.
* NDK libraries: /system/lib/ndk (with symlink from /system/lib)
* VNDK libraries: /system/lib/vndk
* VNDK-ext libraries: /system/lib/vndk-ext
* Framework-only libraries: /system/lib
* Vendor-only libraries: /vendor/lib
* Same-process HALs: /vendor/lib/sameprocess
However, if LOCAL_MODULE_PATH is explicitly set, then it is respected,
with a warning message. Module owners are highly encouraged to
investigate the warnings and use alternatives to LOCAL_MODULE_PATH;
combination of LOCAL_[PROPRIETARY|OEM|ODM]_MODULE, LOCAL_MODULE_CLASS
and LOCAL_RELATIVE_PATH will cover most of the cases.
Furthermore, for each shared libraries whose path is changed, a symolic
link from the original path to the new path is *temporarily* generated.
e.g. /system/lib/libbase.so -> vndk/libbase.so. This is
to prevent sudden breakage of the code expecting the lib from the old
path. This symbolic links will eventually be removed before O launch
(b/34917183).
Finally, BOARD_SAME_PROCESS_HAL_DEPS is added. It contains the list of
shared libraries implementing the same-process HALs and its internal sub
libraries. This is designed to be defined in BoardConfig.mk
Bug: 33681361
Test: build & run. Libraries must be in the correct directories.
Symlinks from the old path to the new path must exist.
Change-Id: I46130aac09ae65400fd4d0abbc2e12dddd154fb1
This also makes the resulting zip files more repeatable -- the file list
is sorted and the entries have static timestamps.
On my machine, this saves ~30 seconds for android-cts.zip, it now takes
less than a second.
Test: m -j cts; compare output from without this change
Change-Id: Ia71e35878ff98ba9775115860530e87eee47739f
This change adds default implementation of configstore@1.0 HAL to all
embedded devices.
Bug: 34314793
Test: build. make sure /system/bin/hw has file
android.hardware.configstore@1.0-service
cherry-picked
1d6ab958c configstore: add default implementation of configstore@1.0 HAL
Merged-in: I65f416560de9d65c57e6cfcb9a6fe26b0140d4a6
Change-Id: Ib68fa325a0f0ce60db0701e16a5a9056411fb398
The line was unintentionally removed in commit 7f804ba.
Test: ota_from_target_files.py generates a full OTA. Check the package
metadata.
Change-Id: Icae88e2a9bb2bfc450a3d0d7ab524d6a6eac9df5
BBOTA v1 and v2 (introduced in L and L MR1 respectively) don't support
resumable OTA. We shouldn't generate packages using v1/v2 at the risk of
bricking devices.
BBOTA v3 (since M) and v4 (since N) both support resumable OTAs. BBOTA
v4 additionally supports using FEC to possibly recover a corrupted
image.
Bug: 33694730
Test: Generate full and incremental OTAs w/ and w/o the CL. They should
give identical packages (in v4).
Change-Id: Ib89d9cd63ba08e8e9aa4131bed18876b89d244c0
Test: Marlin and Bullhead build and boot with no new denials.
Test: Marlin and Bullhead recovery boots with no new denials.
Test: Bullhead boots with file_contexts.bin in /
Test: Marlin boot with /system/etc/selinux/plat_file_contexts and
/vendor/etc/selinux/nonplat_file_contexts.
Bug: 36002414
Change-Id: I25af653e060c0c72ea6ad08db8869132885adff8
Remove the following functions that are needed for file-based OTAs only:
- SetPermissions()
- SetPermissionsRecursive()
- MakeSymlinks()
- DeleteFiles()
- DeleteFilesIfNotMatching()
- RenameFiles()
- SkipNextActionIfTargetExists()
Bug: 35853185
Test: Verified there's no reference to these functions.
Change-Id: Iff24a9d705476211effaef28eed2a147fa5fcbce
For aosp_marlin (on AOSP), this speeds up target files creation from
~57 seconds to ~15 seconds.
For marlin-userdebug (on internal master), this speeds up target files
creation from ~300 seconds to ~95 seconds.
This does make some minor changes to the resulting target_files zip:
* All of the META files are actually at the beginning of the zip now,
previously the ones created by add_img_to_target_files would be at
the end.
* The images are slightly larger. Go's zip implementation in soong_zip
isn't quite as good as the `zip` tool.
* vendor_filesystem_config.txt isn't present if we're not building a
vendor image.
Test: aosp_marlin target_files zip changes look reasonable
Test: marlin target_files zip changes look reasonable
Test: bullhead target_files zip changes look reasonable
Change-Id: Ia5ce6870b85559d65107c3b94332391b4b43a0ea
In addition to the current behavior of add_img_to_target_files working
on an existing zip file, allow passing in a directory where the target
files have already been extracted. When in this mode, it writes the
images out to that directory instead of the zip file.
This allows us to call add_img_to_target_files on the temp directory
used during the build to create the target files package, saving the
time and space of unzipping what we just zipped. This also allows us to
use the parallel soong_zip, which compresses the images much faster.
Test: aosp_marlin target_files zip is the same before/after this change
Test: marlin target_files zip is the same before/after this change
Test: bullhead target_files zip is the same before/after this change
Change-Id: I155654cdc7ad7754ba4ef76ec69c31f504a58198
We have stopped shipping devices with file-based OTAs, and are not
actively maintaining the support. Devices using file-based OTAs
should be moved to block-based, if not A/B OTAs.
We will also need to clean up EdifyGenerator class, which will be
handled in follow-up CLs.
Bug: 35853185
Test: Generate full and incremental OTAs w/ and w/o the CL, and they
give identical packages.
Test: Not specifying --block also generates block-base OTAs.
Change-Id: I3b0fc8ce5600e109f3251fe41f655534aaa298c7
We must have created the images (system.img, system.map etc) prior to
calling ota_from_target_files.py (added by commit
2e0d8fcf08, into Lollipop).
Remove the obsolete suppport for handling "old" target_files zips that
don't have such images. This simplies the logic for BuildSystem() and
BuildVendor(), which now would only be called by
add_img_to_target_files.py itself.
Test: Generating full and incremental OTAs give the same results, w/ and
w/o this CL.
Change-Id: I0ea243d09d3378249d7982701ae4ec339b04b7b8
Otherwise it doesn't work for incremental builds.
Bug: 34929159
Bug: 35997300
Test: repo sync && m
Change-Id: I78ead57cf89a9d0f26dbf4f3a225a9357bdca1b3
The first one in WriteVerifyPackage() is mismatching function parameters
that can be trivially fixed.
The other one is in WriteABOTAPackageWithBrilloScript(), where we don't
have edify script instance.
Test: `pylint --rcfile=pylintrc ota_from_target_files.py`.
Change-Id: Ie238ef5b296dfe9e725b61376992447b662d2376
The major issue with the existing implementation is unnecessarily
holding too much data in memory, such as HashBlocks() which first reads
in *all* the data to a list before hashing. We can leverage generator
functions to stream such operations.
This CL makes the following changes to reduce the peak memory use.
- Adding RangeSha1() and WriteRangeDataToFd() to Image classes. These
functions perform the operations on-the-fly.
- Caching the computed SHA-1 values for a Transfer instance.
As a result, this CL reduces the peak memory use by ~80% (e.g. reducing
from 5.85GB to 1.16GB for the same incremental, as shown by "Maximum
resident set size" from `/usr/bin/time -v`). It also effectively
improves the (package generation) performance by ~30%.
Bug: 35768998
Bug: 32312123
Test: Generating the same incremental w/ and w/o the CL give identical
output packages.
Change-Id: Ia5c6314b41da73dd6fe1dbe2ca81bbd89b517cec
