This was ok for apk because they are in different parent directory.
Test: marlin built
Bug: 63920015
Bug: 30972906
Change-Id: I5ed00824fda9e7e0a99c825402753c21a06ba6c5
Since Clang-4579689, crt libraries use i386 instead of i686. Update the
hardcoded paths to the new names.
Bug: 72942266
Test: N/A
Change-Id: I24f8f5742ac2fecd374fdaa3be8a11f410d31cbf
If PRODUCT_TREBLE_LINKER_NAMESPACES is not true when
BOARD_VNDK_VERSION is defined, report a build error.
To enable VNDK, linker namespace must be configured.
Bug: 72704254
Test: Try to build with one of them is missing
Change-Id: I804704e2f48fa44c8f998183508741d5cc40e4ce
The module name of system_$(VER) prebuilt file is system_sdk_v$(VER).
But this is inconsistent with sdk_v$(LOCAL_SDK_VERSION) in prebuilts/sdk.
So, system_sdk_v$(VER) is changed to sdk_vsystem_$(VER) to use the same
naming policy.
Bug: 72031391
Test: build
Change-Id: I379c0f9aa0de7407489eeec2b07ee7727e81d69d
'monotonic' has been non-optional since [1] (L-MR1). Fix the comment in
RangeSet.parse(), as well as the use in blockimgdiff.py.
[1] commit 8b72aefb5a.
Test: Generate an incremental BBOTA package.
Change-Id: I7f95231683473b4f0f07f9c83fccc0e36a1340cb
Allows target modules to directly request host modules they
require to be built and installed as well.
Bug: 72761631
Test: Added LOCAL_HOST_REQUIRED_MODULES to a target apk test and
the host module was built.
Change-Id: I5aca11b3ba8b54676f068d337f1c9ba0e0b01997
Prior to this CL, the call to delta_generator in
check_ota_package_signature.VerifyAbOtaPayload() didn't redirect stderr.
The logs (mostly INFO) on successful verification added noise to the
normal output, which also upset the unittest result parser.
This CL captures stderr outputs from delta_generator, and will only dump
them on error.
Bug: 72884343
Test: `python -m unittest -v test_ota_from_target_files > /dev/null`
gives clean output.
Test: Inject error into delta_generator. The call to
check_ota_package_signature correctly dumps both of stdout and
stderr outputs.
Change-Id: I014a4b21bf758dcf0a4b9963259d6019851935ee
Kati's find emulator doesn't understand "| sort", so use use the make
function instead so that we can emulate the find commands.
before: *kati*: shell time (regen): 1.316989 / 187
after: *kati*: shell time (regen): 1.249748 / 184
The time has a lot of variance, the important change is the reduction in
number of shell commands. Kati has other issues with some of these (it
doesn't support find's implicit -a), which is why it only goes down by
3. I'll be fixing Kati separately to handle those cases.
Test: diff out/build-aosp_taimen.ninja before&after
Change-Id: I5c8c2993f01a8a6af84963e903a8a0c186a61e82
This is a list of sepolicy versions that the framework supports.
Test: build framework compatibility matrix
Test: boots
Bug: 67920434
Change-Id: I82365742172b653eadb7b5315398e06cace4e000
This prevents them from mistakenly bleeding between test targets.
Bug: 72384841
Test: make Run_TeleService_robotests
Change-Id: Ie2c047be1450420f8e27b8b45e9416e96b477b45
By default, an A/B OTA package doesn't contain the images for the
secondary slot (e.g. system_other.img). Specifying
"--include_secondary" that's introduced in this CL allows generating
a separate payload that will install secondary slot images. Both
payloads will be added to the generated A/B OTA package.
An example A/B OTA package with secondary payload
|
+-- payload.bin
|
+-- payload_properties.txt
|
+-- secondary/payload.bin
|
+-- secondary/payload_properties.txt
|
+-- ...
Such a package needs to be applied in a two-stage manner. During the
first stage, the updater applies the primary payload only. Upon
finishing, it reboots the device into the newly updated slot. It then
continues to install the secondary payload to the inactive slot, but
without switching the active slot at the end (needs the matching support
in update_engine, i.e. SWITCH_SLOT_ON_REBOOT flag).
Due to the special install procedure, the secondary payload will be
always generated as a full payload.
Bug: 35724498
Test: Generate full and incremental OTAs with --include_secondary. Check
the generated OTAs.
Test: python -m unittest test_ota_from_target_files
Change-Id: I975e826bec492e86eb400f99de0c355a32420127
This makefile specifies a configuration that only starts a 64 bit
zygote (as opposed to both 64/32, as standard 64 bit builds do).
It should be inherited by products that only supports 64 bit apps.
Bug: 72810053
Test: Manual, using product in https://android-review.googlesource.com/608276
Change-Id: Ib88eccf8d4c575bfd93d6edb130348aeca4ae3f8
When calling 'openssl x509 -pubkey' to extract the public key from a
certificate, openssl 1.0 and 1.1 handle the '-out' parameter
differently. openssl 1.0 doesn't write the output into the specified
filename, which leads to the payload verification failure in
check_ota_package_signature.VerifyAbOtaPayload(). This CL addresses
the issue by always collecting the output from stdout instead.
It also refactors the two copies into common.ExtractPublicKey(), and
adds unittest. get_testdata_dir() is moved into test_utils.py that holds
common utils for running the unittests.
Bug: 72884343
Test: python -m unittest test_common
Test: python -m unittest test_ota_from_target_files
Test: Run sign_target_files_apks with '--replace_ota_keys' on marlin
target_files zip. Check the payload pubkey replacement.
Test: Trigger the tests with forrest, and tests no longer fail on
machines with openssl 1.0.1.
Change-Id: Ib0389b360f064053e9aa7cc0546d718e7b23003b
This breaks down the current WriteABOTAPackageWithBrilloScript() into
smaller and testable units, which also prepares for the work in
b/35724498.
Bug: 35724498
Test: python -m unittest test_ota_from_target_files
Test: Get identical A/B OTA packages w/ and w/o the CL.
Change-Id: I2ea45ce98e2d2baa58e94fb829b7242f6fe685a7
Merged-In: I2ea45ce98e2d2baa58e94fb829b7242f6fe685a7
(cherry picked from commit 036d721812)
This adds the Traceur app to all builds on phones and tablets.
Previously, it was included on userdebug builds on specific devices only.
Bug: 64762598
Test: Flashed a user build and a userdebug build and saw Traceur on both
builds.
Change-Id: I9bf7d68c737845a519f57f8f60ee9064bf33a2f5
The same thing has been set in GetPackageMetadata(), so they are no-op.
Also replace an occurrence of 'OPTIONS.source_info_dict' with
source_info, which has been missed from previous clean-up CLs.
Test: Generate an A/B OTA package, and an incremental BBOTA with
--wipe_user_data. Check the metadata.
Test: Generate a two-step incremental BBOTA successfully.
Change-Id: I4bb491cac9064d93fb86d12e617c8f38f040e01e
The info comes from the build.prop file of the target build (thus no
backward compatibility concerns). OTA server and client can optionally
use these info to understand the expected behavior of an OTA package.
Bug: 72751683
Test: python -m unittest test_ota_from_target_files
Test: `m dist`, then check the metadata in the generated OTA package.
Change-Id: I5935f67684d2486bb5f00d67ce4bc756589a56ed
