am: 94f576d
* commit '94f576d18cb61e672bcc849a324eab244dd4f3f8':
Fix emulator specific SELinux denials related to qemu.gles
Change-Id: Iba1c077238ec1c41434c87e8ac96467a081383fc
This type is never used in core policy, only by emulators.
Move the definition of this type to where it's used.
Bug: 28221393
Change-Id: I38dbc12dbe9813f323d4bcd5f07679db57b2fd4a
This is to allow surfaceflinger to always load vendor provided
egl libraries first and fall back to software renderer, and then
set the qemu.gles to correct value reflecting what libraries
are actually used.
bug: 27273457
Change-Id: Ifaca31aa2e562f50baa41fd228df9836bc3b1667
Use global default USE_CLANG_PLATFORM_BUILD set in core/envsetup.mk,
or user provided environment variable USE_CLANG_PLATFORM_BUILD.
BUG: 26102335
Change-Id: I7e12219a60f36bb44797bb028b4a5873a67c9210
Currently, properties that begin with "ro." are special cased to skip
over the "ro." part of the prefix before matching with entries in
property_contexts. A change to init is removing this special case and
therefore, the "ro." prefixes must be explicitly added to
property_contexts.
Bug 26425619
Change-Id: I735eb9fc208eeec284cda8d778db946eeec24192
This commit fixes the avc denied issues in the emulators:
- goldfish_setup is granted for network access
- netd dontaudit for sys_module
- qemu_prop is granted domain for get_prop
Critical issue was that SELinux denied reading the lcd_density property
by SurfaceFlinger via qemu_prop and this commit fixes it.
Change-Id: I633d96f4d2ee6659f18482a53e21f816abde2a5f
Signed-off-by: Miroslav Tisma <miroslav.tisma@imgtec.com>
These boot properties are used by android wear emulator to configure
round and chin shaped devices.
Bug: 23324757
Change-Id: I812da02d771bba0ffc63b14459c7de7cbdeed142
Addresses the following denial:
init: avc: denied { set } for property=opengles.version scontext=u:r:qemu_props:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service
Bug: 25148690
Change-Id: I4b197eeabfe37e794104e4e686e9e388b5bc3e0c
When the toolbox domain was introduced, we allowed all domains to exec it
to avoid breakage. However, only domains that were previously allowed the
ability to exec /system files would have been able to do this prior to the
introduction of the toolbox domain. Remove the rule from domain.te and add
rules to all domains that are already allowed execute_no_trans to system_file.
Requires coordination with device-specific policy changes with the same Change-Id.
Change-Id: Ie46209f0412f9914857dc3d7c6b0917b7031aae5
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
This fixes the issue with the emulator "-shell" option.
Init tries to open the console which is passed through
the kernel androidboot.console property, but fails to
open it because "avc" denies it. Init only has permissions
to open console_device in rw mode. This ensures that
/dev/ttyS2 is properly labeled as console_device.
Replaced tabs with spaces.
Change-Id: I9ef94576799bb724fc22f6be54f12de10ed56768
Deal with a build failure in conflict with cl/152105
(cherrypicked from commit 1cc7735ffa)
Bug: 19608716
Change-Id: I1078046db3b159c1baf0a22435c3e777424453a1
The goldfish-setup service (essentially /system/etc/init.goldfish.sh)
executes the following commands when certain conditions are met:
setprop ro.radio.noril yes
stop ril-daemon
so as to stop the RIL daemon and emulate a WiFi-only device. Both would
fail, though, because goldfish-setup does not have the permissions to
set relevant properties.
This CL modifies the emulator's SELinux policy to grant the necessary
permissions. It is a step towards fixing the ril-daemon-keeps-getting-
killed-and-restarted problem with the new ("ranchu") emulator, which
does not support telephony emulation yet. (The other step is to have
init start goldfish-setup, which will be done in a seperate CL.)
(cherrypicked from commit 33dca8090f)
Change-Id: Ice7e7898804b7353ac4a8c49d871b1b2571d7a5f
Signed-off-by: Yu Ning <yu.ning@intel.com>
(cherrypicked from commit cccc901639)
Change-Id: I630ba0178439c935d08062892990d43a3cc1239e
Signed-off-by: William Roberts <william.c.roberts@linux.intel.com>
The goldfish-setup service (essentially /system/etc/init.goldfish.sh)
executes the following commands when certain conditions are met:
setprop ro.radio.noril yes
stop ril-daemon
so as to stop the RIL daemon and emulate a WiFi-only device. Both would
fail, though, because goldfish-setup does not have the permissions to
set relevant properties.
This CL modifies the emulator's SELinux policy to grant the necessary
permissions. It is a step towards fixing the ril-daemon-keeps-getting-
killed-and-restarted problem with the new ("ranchu") emulator, which
does not support telephony emulation yet. (The other step is to have
init start goldfish-setup, which will be done in a seperate CL.)
Change-Id: Ice7e7898804b7353ac4a8c49d871b1b2571d7a5f
Signed-off-by: Yu Ning <yu.ning@intel.com>
In goldfish kernel 3.10, the goldfish_tty device instantiates virtual
serial ports as /dev/ttyGF* (e.g. /dev/ttyGF0), not as /dev/ttyS* as in
goldfish kernel 3.4. However, in the emulator's SELinux security policy,
there is no specific security context assigned to /dev/ttyGF*, and the
one inherited from /dev (u:object_r:device:s0) prevents services such as
qemud and goldfish-logcat from reading and writing ttyGF*. Consequently,
qemud terminates abnormally on the classic x86_64 emulator:
init: Service 'qemud' (pid XXX) exited with status 1
Fix this issue by assigning /dev/ttyGF* the same security context as
/dev/ttyS*.
(cherrypicked from commit 4783467922)
Change-Id: Ia7394dc217bd82f566c4d1b7eda3cc8ce3ac612f
Signed-off-by: Yu Ning <yu.ning@intel.com>
In goldfish kernel 3.10, the goldfish_tty device instantiates virtual
serial ports as /dev/ttyGF* (e.g. /dev/ttyGF0), not as /dev/ttyS* as in
goldfish kernel 3.4. However, in the emulator's SELinux security policy,
there is no specific security context assigned to /dev/ttyGF*, and the
one inherited from /dev (u:object_r:device:s0) prevents services such as
qemud and goldfish-logcat from reading and writing ttyGF*. Consequently,
qemud terminates abnormally on the classic x86_64 emulator:
init: Service 'qemud' (pid XXX) exited with status 1
Fix this issue by assigning /dev/ttyGF* the same security context as
/dev/ttyS*.
Change-Id: Ia7394dc217bd82f566c4d1b7eda3cc8ce3ac612f
Signed-off-by: Yu Ning <yu.ning@intel.com>
In goldfish kernel 3.10, qemu_pipe has been renamed to goldfish_pipe.
However, in the emulator's SELinux policy, there is no specific security
context assigned to /dev/goldfish_pipe, and the one inherited from /dev
(u:object_r:device:s0) prevents various processes (qemud, qemu-props,
etc.) from reading and writing goldfish_pipe. Consequently, the classic
x86_64 emulator will not boot if GPU emulation is enabled ("-gpu host"),
and does not render the UI correctly if launched with "-gpu off".
Fix this issue by assigning /dev/goldfish_pipe the same security context
as /dev/qemu_pipe.
This CL also benefits the new ("ranchu") emulator, where all supported
ABIs (arm64, mips64, x86 and x86_64) use 3.10-based kernels. Without
this fix, the new emulator boots and works, but there are avc denials
related to goldfish_pipe.
Last but not least, it is now possible to boot the classic x86 emulator
with a 3.10-based kernel instead of the current 3.4-based one, without
disabling SELinux.
(cherry-pick of commit: a5053e6b35)
Change-Id: I52e75c94d3ae3758cbbf5bc0e1d84254fdf5c6cb
Signed-off-by: Yu Ning <yu.ning@intel.com>
In goldfish kernel 3.10, qemu_pipe has been renamed to goldfish_pipe.
However, in the emulator's SELinux policy, there is no specific security
context assigned to /dev/goldfish_pipe, and the one inherited from /dev
(u:object_r:device:s0) prevents various processes (qemud, qemu-props,
etc.) from reading and writing goldfish_pipe. Consequently, the classic
x86_64 emulator will not boot if GPU emulation is enabled ("-gpu host"),
and does not render the UI correctly if launched with "-gpu off".
Fix this issue by assigning /dev/goldfish_pipe the same security context
as /dev/qemu_pipe.
This CL also benefits the new ("ranchu") emulator, where all supported
ABIs (arm64, mips64, x86 and x86_64) use 3.10-based kernels. Without
this fix, the new emulator boots and works, but there are avc denials
related to goldfish_pipe.
Last but not least, it is now possible to boot the classic x86 emulator
with a 3.10-based kernel instead of the current 3.4-based one, without
disabling SELinux.
Change-Id: Iad979c0ee9d0a410be12b83ac1bef9476b50a6dc
Signed-off-by: Yu Ning <yu.ning@intel.com>
As suggested in the comments on
https://android-review.googlesource.com/#/c/141560/
drop BOARD_SEPOLICY_UNION and simplify the build_policy logic.
Union all files found under BOARD_SEPOLICY_DIRS.
Change-Id: I4214893c999c23631f5456cb1b8edd59771ef13b
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
When building a generic arm 32-bit target, we also want to include
support for the ranchu board model for the updated Android emulator
based on recent upstream QEMU.
Since the emulator.mk file is included by both the generic and
generic_arm64 targets and already defines a PRODUCT_COPY_FILES and
PRODUCT_PACKAGES, move duplicate entries from
target/board/generic*/device.mk to target/product/emulator.mk.
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Change-Id: I7922ec0c4097776a185dbb245301d760ff332386
Switch the qemud domain from unconfined_domain() to
permissive_or_unconfined() so that we can start collecting and
addressing denials in -userdebug/-eng builds.
Also allow access to the serial device.
Change-Id: I9c7a6ddc8c2e64bfc6c5bb896eed1729ab205d60
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
