The vendor image will have more than just proprietary modules in it
under Treble, so let's stop marking open source code as proprietary just
to move it to vendor.
Bug: 36452052
Test: compare build-aosp_arm.ninja before/after, no changes.
Test: Try defining LOCAL_VENDOR_MODULE / LOCAL_PROPRIETARY_MODULE in the
same and different ways, ensure it works.
Change-Id: I0ab046bcb7563a20d44ed00667e18497ef0873a8
This means that we won't have to rebuild the odex files after an
installclean.
Test: profile.prof is identical before/after
Test: m -j; m installclean; m -j
Change-Id: I53c630ce0c5a985d856e26bd7bb3d8c76958aaab
This reverts commit 842a985f90. It's
causing test failures, warnings and complaints, so backing it out and
we'll resolve those before putting it back in.
This also bundles in the revert of a minor warning/error fixup for this
code, and does the correct thing with the CleanSpec.mk (which can't just
be reverted).
Bug: 33681361
Test: m -j
Change-Id: Ic889ce6a4737a497ad6bf633424ce1860713f7d0
system_root_image has been dead since commit
2ce63edab7.
Test: pylint --rcfile=pylintrc add_img_to_target_files.py
Change-Id: Id791747b7313923b82279a21d264a998455a92d4
Warning messages like, "libart_fake: framework library must be installed
to system/lib64 but requested to be installed at system/fake-libs64.
Please fix.", are temporarily muted since some of those warnings might
be false alarms.
Let's just silence the warning for everybody and investigate the cases
internally by turning on the build flag SHOW_MODULE_PATH_WARNINGS.
Test: the warning messages should not be shown unless built with
SHOW_MODULE_PATH_WARNINGS=true.
Change-Id: I5eb3ab3385c92a5192723ff1008277c321162191
This file is no longer needed because it was needed for supporting
reloadable/dynamic SELinux policy which is no longer supported.
Test: Clean build, flash, device boots without additional denials.
Reboot to recovery works, no additional denials.
Bug: 33642277
Change-Id: Ie65e74b8c8437694bc1ea019ab844f60f9e89ade
When bsdiff/imgdiff fails, dump the output along with the src/tgt
filenames and block ranges. Also, exit the script gracefully instead
of raising an exception about iterating over 'NoneType'.
Bug: 31381530
Test: Package generates successfully for angler, and error outputs
correctly with error injection.
Change-Id: I06a2dfe545fbdff7043de05fee34b378453a9291
Compute PLATFORM_VERSION and PLATFORM_VERSION_CODENAME from
TARGET_PLATFORM_VERSION. Add explicit values for O, even though
they are the same as the fall backs, as placeholders for future
values.
Bug: 35445510
Test: manual
Merged-In: I30a7142f732c85b637d2ce072373bc867cedcd42
Change-Id: I30a7142f732c85b637d2ce072373bc867cedcd42
Using ; to join commands in a rule causes failures to be ignored by
make. Use && instead, and add true at the end as the second operand
to the last && operator.
Also inline copy-test-in-batch, batching is no longer necessary as
kati will fall back to a shell script if the recipe is too long to
fit in a command line.
Test: builds
Change-Id: I4a2528bf2a15106cfabaae0336662c4a0464271d
/file_contexts.bin is needed only by devices which do not have
PRODUCT_FULL_TREBLE set to true. Adding this file to devices which
have PRODUCT_FULL_TREBLE set to true causes confusion and wastes
about 800 kB of space.
/file_contexts.bin was being added unconditionally to all devices due
to the build system needing the combined file_contexts file for
host-side labelling of filesystems in images and for inclusion into
target files ZIP (again, to be used for host-side labelling later).
This change switches these targets to depend on the same file, but
from intermediates directory. As a result, everything continues to
work just fine, but without pulling in /file_contexts.bin. On devices
which need /file_contexts.bin, it is pulled in by
system/core/init/Android.mk.
Test: /file_contexts.bin still there on bullhead, but not there on
sailfish with PRODUCT_FULL_TREBLE set to true.
Test: Clean build, device boots up with, no new denials.
Reboot to recovery, recovery boots up fine too, no denials.
This was tested on sailfish-eng and marlin-eng.
Bug: 36002414
Change-Id: I9bbbb08bbf7d874bba0bafcc19bcbf9eec564326
This makes recoveryimage/bootimage targets explicitly depend on SELinux
policy artifacts needed by recovery. Prior to this change, the
dependency was contrived: these targets would rely on copying these
files from "root" directory, and then overwriting sepolicy file with
sepolicy.recovery.
Test: Clean build, flash, device boots up just fine. No new denials.
Reboot into recovery, recovery boot up just fine, no denials.
This was tested on bullhead (non A/B device) and sailfish (A/B
device).
Bug: 33642277
Change-Id: Id2369253d0c7e02e079ae01ac7140b41880fd5ad
Shared libraries are now installed to different directories depending on
their types.
* NDK libraries: /system/lib/ndk (with symlink from /system/lib)
* VNDK libraries: /system/lib/vndk
* VNDK-ext libraries: /system/lib/vndk-ext
* Framework-only libraries: /system/lib
* Vendor-only libraries: /vendor/lib
* Same-process HALs: /vendor/lib/sameprocess
However, if LOCAL_MODULE_PATH is explicitly set, then it is respected,
with a warning message. Module owners are highly encouraged to
investigate the warnings and use alternatives to LOCAL_MODULE_PATH;
combination of LOCAL_[PROPRIETARY|OEM|ODM]_MODULE, LOCAL_MODULE_CLASS
and LOCAL_RELATIVE_PATH will cover most of the cases.
Furthermore, for each shared libraries whose path is changed, a symolic
link from the original path to the new path is *temporarily* generated.
e.g. /system/lib/libbase.so -> vndk/libbase.so. This is
to prevent sudden breakage of the code expecting the lib from the old
path. This symbolic links will eventually be removed before O launch
(b/34917183).
Finally, BOARD_SAME_PROCESS_HAL_DEPS is added. It contains the list of
shared libraries implementing the same-process HALs and its internal sub
libraries. This is designed to be defined in BoardConfig.mk
Bug: 33681361
Test: build & run. Libraries must be in the correct directories.
Symlinks from the old path to the new path must exist.
Change-Id: I46130aac09ae65400fd4d0abbc2e12dddd154fb1
This also makes the resulting zip files more repeatable -- the file list
is sorted and the entries have static timestamps.
On my machine, this saves ~30 seconds for android-cts.zip, it now takes
less than a second.
Test: m -j cts; compare output from without this change
Change-Id: Ia71e35878ff98ba9775115860530e87eee47739f
This change adds default implementation of configstore@1.0 HAL to all
embedded devices.
Bug: 34314793
Test: build. make sure /system/bin/hw has file
android.hardware.configstore@1.0-service
cherry-picked
1d6ab958c configstore: add default implementation of configstore@1.0 HAL
Merged-in: I65f416560de9d65c57e6cfcb9a6fe26b0140d4a6
Change-Id: Ib68fa325a0f0ce60db0701e16a5a9056411fb398
The line was unintentionally removed in commit 7f804ba.
Test: ota_from_target_files.py generates a full OTA. Check the package
metadata.
Change-Id: Icae88e2a9bb2bfc450a3d0d7ab524d6a6eac9df5
BBOTA v1 and v2 (introduced in L and L MR1 respectively) don't support
resumable OTA. We shouldn't generate packages using v1/v2 at the risk of
bricking devices.
BBOTA v3 (since M) and v4 (since N) both support resumable OTAs. BBOTA
v4 additionally supports using FEC to possibly recover a corrupted
image.
Bug: 33694730
Test: Generate full and incremental OTAs w/ and w/o the CL. They should
give identical packages (in v4).
Change-Id: Ib89d9cd63ba08e8e9aa4131bed18876b89d244c0
