Fix printf usage in _wrap_build()

On some systems using floating-point instead of decimal results
in the build time being displayed as "nan:nan".

Test: m, "build completed successfully (02:26 (mm:ss))"
Change-Id: I7a2b401903b63117a7718cc5aa2a0d5610b57ca2

core/Makefile

@@ -1021,6 +1021,17 @@ else
   INSTALLED_KERNEL_TARGET :=
 endif
 
+ifdef INSTALLED_KERNEL_TARGET
+ifneq (,$(filter true,$(BOARD_USES_RECOVERY_AS_BOOT)))
+  INSTALLED_RECOVERY_KERNEL_TARGET := $(INSTALLED_KERNEL_TARGET)
+else ifneq (true,$(BOARD_EXCLUDE_KERNEL_FROM_RECOVERY_IMAGE))
+  ifneq "$(or $(TARGET_KERNEL_RECOVERY_CONFIG), $(TARGET_PREBUILT_RECOVERY_KERNEL))" ""
+    INSTALLED_RECOVERY_KERNEL_TARGET := $(PRODUCT_OUT)/recovery_kernel
+  else
+    INSTALLED_RECOVERY_KERNEL_TARGET := $(firstword $(INSTALLED_KERNEL_TARGET))
+  endif
+endif
+endif
 # -----------------------------------------------------------------
 # the root dir
 INSTALLED_FILES_OUTSIDE_IMAGES := $(filter-out $(TARGET_ROOT_OUT)/%, $(INSTALLED_FILES_OUTSIDE_IMAGES))
@@ -1197,6 +1208,10 @@ ifeq ($(BOARD_RAMDISK_USE_LZ4),true)
 COMPRESSION_COMMAND_DEPS := $(LZ4)
 COMPRESSION_COMMAND := $(LZ4) -l -12 --favor-decSpeed
 RAMDISK_EXT := .lz4
+else ifeq ($(BOARD_RAMDISK_USE_XZ),true)
+COMPRESSION_COMMAND_DEPS := $(XZ)
+COMPRESSION_COMMAND := $(XZ) -f -c --check=crc32 --lzma2=dict=32MiB
+RAMDISK_EXT := .xz
 else
 COMPRESSION_COMMAND_DEPS := $(GZIP)
 COMPRESSION_COMMAND := $(GZIP)
@@ -1343,10 +1358,18 @@ INTERNAL_MKBOOTIMG_VERSION_ARGS := \
   --os_version $(PLATFORM_VERSION_LAST_STABLE) \
   --os_patch_level $(PLATFORM_SECURITY_PATCH)
 
+ifeq ($(strip $(BOARD_KERNEL_SEPARATED_DT)),true)
+  INSTALLED_DTIMAGE_TARGET := $(PRODUCT_OUT)/dt.img
+  INTERNAL_BOOTIMAGE_ARGS += --dt $(INSTALLED_DTIMAGE_TARGET)
+  BOOTIMAGE_EXTRA_DEPS    := $(INSTALLED_DTIMAGE_TARGET)
+endif
+
 # Define these only if we are building boot
 ifdef BUILDING_BOOT_IMAGE
 INSTALLED_BOOTIMAGE_TARGET := $(BUILT_BOOTIMAGE_TARGET)
 
+ifndef BOARD_CUSTOM_BOOTIMG_MK
+
 ifeq ($(TARGET_BOOTIMAGE_USE_EXT2),true)
 $(error TARGET_BOOTIMAGE_USE_EXT2 is not supported anymore)
 endif # TARGET_BOOTIMAGE_USE_EXT2
@@ -1361,7 +1384,7 @@ define build_boot_board_avb_enabled
   $(call build_boot_from_kernel_avb_enabled,$(1),$(kernel))
 endef
 
-$(INSTALLED_BOOTIMAGE_TARGET): $(MKBOOTIMG) $(AVBTOOL) $(INTERNAL_BOOTIMAGE_FILES) $(BOARD_AVB_BOOT_KEY_PATH)
+$(INSTALLED_BOOTIMAGE_TARGET): $(MKBOOTIMG) $(AVBTOOL) $(INTERNAL_BOOTIMAGE_FILES) $(BOARD_AVB_BOOT_KEY_PATH) $(BOOTIMAGE_EXTRA_DEPS)
 	$(call pretty,"Target boot image: $@")
 	$(call build_boot_board_avb_enabled,$@)
 
@@ -1384,7 +1407,7 @@ define build_boot_supports_vboot
   $(call assert-max-image-size,$(1),$(call get-bootimage-partition-size,$(1),boot))
 endef
 
-$(INSTALLED_BOOTIMAGE_TARGET): $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_FILES) $(VBOOT_SIGNER) $(FUTILITY)
+$(INSTALLED_BOOTIMAGE_TARGET): $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_FILES) $(VBOOT_SIGNER) $(FUTILITY) $(BOOTIMAGE_EXTRA_DEPS)
 	$(call pretty,"Target boot image: $@")
 	$(call build_boot_supports_vboot,$@)
 
@@ -1406,7 +1429,7 @@ define build_boot_novboot
   $(call assert-max-image-size,$1,$(call get-bootimage-partition-size,$(1),boot))
 endef
 
-$(INSTALLED_BOOTIMAGE_TARGET): $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_FILES)
+$(INSTALLED_BOOTIMAGE_TARGET): $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_FILES) $(BOOTIMAGE_EXTRA_DEPS)
 	$(call pretty,"Target boot image: $@")
 	$(call build_boot_novboot,$@)
 
@@ -1421,6 +1444,7 @@ bootimage-nodeps: $(MKBOOTIMG)
 	$(foreach b,$(INSTALLED_BOOTIMAGE_TARGET),$(call build_boot_novboot,$(b)))
 
 endif # BOARD_AVB_ENABLE
+endif # BOARD_CUSTOM_BOOTIMG_MK not defined
 endif # BUILDING_BOOT_IMAGE
 
 else # TARGET_NO_KERNEL == "true"
@@ -2142,9 +2166,11 @@ $(if $(BOARD_$(_var)IMAGE_SQUASHFS_COMPRESSOR),$(hide) echo "$(1)_squashfs_compr
 $(if $(BOARD_$(_var)IMAGE_SQUASHFS_COMPRESSOR_OPT),$(hide) echo "$(1)_squashfs_compressor_opt=$(BOARD_$(_var)IMAGE_SQUASHFS_COMPRESSOR_OPT)" >> $(2))
 $(if $(BOARD_$(_var)IMAGE_SQUASHFS_DISABLE_4K_ALIGN),$(hide) echo "$(1)_squashfs_disable_4k_align=$(BOARD_$(_var)IMAGE_SQUASHFS_DISABLE_4K_ALIGN)" >> $(2))
 $(if $(PRODUCT_$(_var)_BASE_FS_PATH),$(hide) echo "$(1)_base_fs_file=$(PRODUCT_$(_var)_BASE_FS_PATH)" >> $(2))
-$(eval _size := $(BOARD_$(_var)IMAGE_PARTITION_SIZE))
-$(eval _reserved := $(BOARD_$(_var)IMAGE_PARTITION_RESERVED_SIZE))
-$(eval _headroom := $(PRODUCT_$(_var)_HEADROOM))
+$(if $(filter true,$(AB_OTA_UPDATER)),,\
+    $(eval _size := $(BOARD_$(_var)IMAGE_PARTITION_SIZE))
+    $(eval _reserved := $(BOARD_$(_var)IMAGE_PARTITION_RESERVED_SIZE))
+    $(eval _headroom := $(PRODUCT_$(_var)_HEADROOM))
+)
 $(if $(or $(_size), $(_reserved), $(_headroom)),,
     $(hide) echo "$(1)_disable_sparse=true" >> $(2))
 $(call add-common-flags-to-image-props,$(1),$(2))
@@ -2369,6 +2395,8 @@ ifdef BUILDING_RECOVERY_IMAGE
 
 INTERNAL_RECOVERYIMAGE_FILES := $(filter $(TARGET_RECOVERY_OUT)/%, \
     $(ALL_DEFAULT_INSTALLED_MODULES))
+INTERNAL_RECOVERYIMAGE_FILES += $(filter $(PRODUCT_OUT)/install/%, \
+    $(ALL_DEFAULT_INSTALLED_MODULES))
 
 INSTALLED_FILES_FILE_RECOVERY := $(PRODUCT_OUT)/installed-files-recovery.txt
 INSTALLED_FILES_JSON_RECOVERY := $(INSTALLED_FILES_FILE_RECOVERY:.txt=.json)
@@ -2417,10 +2445,14 @@ IGNORE_RECOVERY_SEPOLICY := $(patsubst $(TARGET_RECOVERY_OUT)/%,--exclude=/%,$(r
 
 # if building multiple boot images from multiple kernels, use the first kernel listed
 # for the recovery image
-recovery_kernel := $(firstword $(INSTALLED_KERNEL_TARGET))
+recovery_kernel := $(INSTALLED_RECOVERY_KERNEL_TARGET)
 recovery_ramdisk := $(PRODUCT_OUT)/ramdisk-recovery.img
+recovery_uncompressed_ramdisk := $(PRODUCT_OUT)/ramdisk-recovery.cpio
 recovery_resources_common := bootable/recovery/res
 
+ifneq (,$(TARGET_RECOVERY_DENSITY))
+recovery_density := $(filter %dpi,$(TARGET_RECOVERY_DENSITY))
+else
 # Set recovery_density to a density bucket based on TARGET_SCREEN_DENSITY, PRODUCT_AAPT_PREF_CONFIG,
 # or mdpi, in order of preference. We support both specific buckets (e.g. xdpi) and numbers,
 # which get remapped to a bucket.
@@ -2436,6 +2468,7 @@ recovery_density := $(strip \
        $(if $(filter $(shell echo $$(($(recovery_density_value) >= 280))),1),xhdpi),\
        $(if $(filter $(shell echo $$(($(recovery_density_value) >= 200))),1),hdpi,mdpi)))
 endif
+endif
 
 ifneq (,$(wildcard $(recovery_resources_common)-$(recovery_density)))
 recovery_resources_common := $(recovery_resources_common)-$(recovery_density)
@@ -2479,23 +2512,12 @@ RECOVERY_ERASING_TEXT_FILE := $(dir $(RECOVERY_INSTALLING_TEXT_FILE))/erasing_te
 RECOVERY_ERROR_TEXT_FILE := $(dir $(RECOVERY_INSTALLING_TEXT_FILE))/error_text.png
 RECOVERY_NO_COMMAND_TEXT_FILE := $(dir $(RECOVERY_INSTALLING_TEXT_FILE))/no_command_text.png
 
-RECOVERY_CANCEL_WIPE_DATA_TEXT_FILE := $(dir $(RECOVERY_INSTALLING_TEXT_FILE))/cancel_wipe_data_text.png
-RECOVERY_FACTORY_DATA_RESET_TEXT_FILE := $(dir $(RECOVERY_INSTALLING_TEXT_FILE))/factory_data_reset_text.png
-RECOVERY_TRY_AGAIN_TEXT_FILE := $(dir $(RECOVERY_INSTALLING_TEXT_FILE))/try_again_text.png
-RECOVERY_WIPE_DATA_CONFIRMATION_TEXT_FILE := $(dir $(RECOVERY_INSTALLING_TEXT_FILE))/wipe_data_confirmation_text.png
-RECOVERY_WIPE_DATA_MENU_HEADER_TEXT_FILE := $(dir $(RECOVERY_INSTALLING_TEXT_FILE))/wipe_data_menu_header_text.png
-
 generated_recovery_text_files := \
   $(RECOVERY_INSTALLING_TEXT_FILE) \
   $(RECOVERY_INSTALLING_SECURITY_TEXT_FILE) \
   $(RECOVERY_ERASING_TEXT_FILE) \
   $(RECOVERY_ERROR_TEXT_FILE) \
   $(RECOVERY_NO_COMMAND_TEXT_FILE) \
-  $(RECOVERY_CANCEL_WIPE_DATA_TEXT_FILE) \
-  $(RECOVERY_FACTORY_DATA_RESET_TEXT_FILE) \
-  $(RECOVERY_TRY_AGAIN_TEXT_FILE) \
-  $(RECOVERY_WIPE_DATA_CONFIRMATION_TEXT_FILE) \
-  $(RECOVERY_WIPE_DATA_MENU_HEADER_TEXT_FILE)
 
 resource_dir := bootable/recovery/tools/recovery_l10n/res/
 resource_dir_deps := $(sort $(shell find $(resource_dir) -name *.xml -not -name .*))
@@ -2513,12 +2535,6 @@ $(RECOVERY_INSTALLING_TEXT_FILE): PRIVATE_RECOVERY_BACKGROUND_TEXT_LIST := \
   recovery_erasing \
   recovery_error \
   recovery_no_command
-$(RECOVERY_INSTALLING_TEXT_FILE): PRIVATE_RECOVERY_WIPE_DATA_TEXT_LIST := \
-  recovery_cancel_wipe_data \
-  recovery_factory_data_reset \
-  recovery_try_again \
-  recovery_wipe_data_menu_header \
-  recovery_wipe_data_confirmation
 $(RECOVERY_INSTALLING_TEXT_FILE): .KATI_IMPLICIT_OUTPUTS := $(filter-out $(RECOVERY_INSTALLING_TEXT_FILE),$(generated_recovery_text_files))
 $(RECOVERY_INSTALLING_TEXT_FILE): $(image_generator_jar) $(resource_dir_deps) $(recovery_noto-fonts_dep) $(recovery_roboto-fonts_dep) $(zopflipng)
 	# Prepares the font directory.
@@ -2527,7 +2543,7 @@ $(RECOVERY_INSTALLING_TEXT_FILE): $(image_generator_jar) $(resource_dir_deps) $(
 	$(foreach filename,$(PRIVATE_SOURCE_FONTS), cp $(filename) $(PRIVATE_RECOVERY_FONT_FILES_DIR) &&) true
 	@rm -rf $(dir $@)
 	@mkdir -p $(dir $@)
-	$(foreach text_name,$(PRIVATE_RECOVERY_BACKGROUND_TEXT_LIST) $(PRIVATE_RECOVERY_WIPE_DATA_TEXT_LIST), \
+	$(foreach text_name,$(PRIVATE_RECOVERY_BACKGROUND_TEXT_LIST), \
 	  $(eval output_file := $(dir $@)/$(patsubst recovery_%,%_text.png,$(text_name))) \
 	  $(eval center_alignment := $(if $(filter $(text_name),$(PRIVATE_RECOVERY_BACKGROUND_TEXT_LIST)), --center_alignment)) \
 	  java -jar $(PRIVATE_IMAGE_GENERATOR_JAR) \
@@ -2543,13 +2559,18 @@ RECOVERY_INSTALLING_SECURITY_TEXT_FILE :=
 RECOVERY_ERASING_TEXT_FILE :=
 RECOVERY_ERROR_TEXT_FILE :=
 RECOVERY_NO_COMMAND_TEXT_FILE :=
-RECOVERY_CANCEL_WIPE_DATA_TEXT_FILE :=
-RECOVERY_FACTORY_DATA_RESET_TEXT_FILE :=
-RECOVERY_TRY_AGAIN_TEXT_FILE :=
-RECOVERY_WIPE_DATA_CONFIRMATION_TEXT_FILE :=
-RECOVERY_WIPE_DATA_MENU_HEADER_TEXT_FILE :=
 endif # TARGET_RECOVERY_UI_SCREEN_WIDTH
 
+ifneq ($(TARGET_RECOVERY_DEVICE_DIRS),)
+recovery_root_private := $(strip \
+  $(foreach d,$(TARGET_RECOVERY_DEVICE_DIRS), $(wildcard $(d)/recovery/root)))
+else
+recovery_root_private := $(strip $(wildcard $(TARGET_DEVICE_DIR)/recovery/root))
+endif
+ifneq ($(recovery_root_private),)
+recovery_root_deps := $(shell find $(recovery_root_private) -type f)
+endif
+
 ifndef TARGET_PRIVATE_RES_DIRS
 TARGET_PRIVATE_RES_DIRS := $(wildcard $(TARGET_DEVICE_DIR)/recovery/res)
 endif
@@ -2594,7 +2615,7 @@ endif
 
 ifeq (,$(filter true, $(BOARD_USES_FULL_RECOVERY_IMAGE) $(BOARD_USES_RECOVERY_AS_BOOT) \
   $(BOARD_INCLUDE_RECOVERY_DTBO) $(BOARD_INCLUDE_RECOVERY_ACPIO) \
-  $(BOARD_MOVE_RECOVERY_RESOURCES_TO_VENDOR_BOOT)))
+  $(BOARD_MOVE_RECOVERY_RESOURCES_TO_VENDOR_BOOT) $(BOARD_RAMDISK_USE_LZ4) $(BOARD_RAMDISK_USE_XZ)))
 # Named '.dat' so we don't attempt to use imgdiff for patching it.
 RECOVERY_RESOURCE_ZIP := $(TARGET_OUT_VENDOR)/etc/recovery-resource.dat
 ALL_DEFAULT_INSTALLED_MODULES += $(RECOVERY_RESOURCE_ZIP)
@@ -2606,6 +2627,7 @@ INSTALLED_RECOVERY_BUILD_PROP_TARGET := $(TARGET_RECOVERY_ROOT_OUT)/prop.default
 
 $(INSTALLED_RECOVERY_BUILD_PROP_TARGET): PRIVATE_RECOVERY_UI_PROPERTIES := \
     TARGET_RECOVERY_UI_ANIMATION_FPS:animation_fps \
+    TARGET_RECOVERY_UI_BLANK_UNBLANK_ON_INIT:blank_unblank_on_init \
     TARGET_RECOVERY_UI_MARGIN_HEIGHT:margin_height \
     TARGET_RECOVERY_UI_MARGIN_WIDTH:margin_width \
     TARGET_RECOVERY_UI_MENU_UNUSABLE_ROWS:menu_unusable_rows \
@@ -2702,7 +2724,12 @@ ifndef BOARD_RECOVERY_MKBOOTIMG_ARGS
   BOARD_RECOVERY_MKBOOTIMG_ARGS := $(BOARD_MKBOOTIMG_ARGS)
 endif
 
-$(INTERNAL_RECOVERY_RAMDISK_FILES_TIMESTAMP): $(MKBOOTFS) $(COMPRESSION_COMMAND_DEPS) \
+ifeq ($(strip $(BOARD_KERNEL_SEPARATED_DT)),true)
+  INTERNAL_RECOVERYIMAGE_ARGS += --dt $(INSTALLED_DTIMAGE_TARGET)
+  RECOVERYIMAGE_EXTRA_DEPS    := $(INSTALLED_DTIMAGE_TARGET)
+endif
+
+$(INTERNAL_RECOVERY_RAMDISK_FILES_TIMESTAMP): $(MKBOOTFS) \
 	    $(INTERNAL_ROOT_FILES) \
 	    $(INSTALLED_RAMDISK_TARGET) \
 	    $(INTERNAL_RECOVERYIMAGE_FILES) \
@@ -2710,7 +2737,7 @@ $(INTERNAL_RECOVERY_RAMDISK_FILES_TIMESTAMP): $(MKBOOTFS) $(COMPRESSION_COMMAND_
 	    $(INSTALLED_2NDBOOTLOADER_TARGET) \
 	    $(INSTALLED_RECOVERY_BUILD_PROP_TARGET) \
 	    $(INSTALLED_RECOVERY_RAMDISK_BUILD_PROP_TARGET) \
-	    $(recovery_resource_deps) \
+	    $(recovery_resource_deps) $(recovery_root_deps) \
 	    $(recovery_fstab)
 	# Making recovery image
 	mkdir -p $(TARGET_RECOVERY_OUT)
@@ -2729,10 +2756,12 @@ $(INTERNAL_RECOVERY_RAMDISK_FILES_TIMESTAMP): $(MKBOOTFS) $(COMPRESSION_COMMAND_
 	$(foreach recovery_text_file,$(generated_recovery_text_files), \
 	  cp -rf $(recovery_text_file) $(TARGET_RECOVERY_ROOT_OUT)/res/images/ &&) true
 	cp -f $(recovery_font) $(TARGET_RECOVERY_ROOT_OUT)/res/images/font.png
+	$(foreach item,$(recovery_root_private), \
+	  cp -rf $(item) $(TARGET_RECOVERY_OUT)/;)
 	$(foreach item,$(TARGET_PRIVATE_RES_DIRS), \
-	  cp -rf $(item) $(TARGET_RECOVERY_ROOT_OUT)/$(newline))
+	  cp -rf $(item) $(TARGET_RECOVERY_ROOT_OUT)/$(newline);)
 	$(foreach item,$(recovery_fstab), \
-	  cp -f $(item) $(TARGET_RECOVERY_ROOT_OUT)/system/etc/recovery.fstab)
+	  cp -f $(item) $(TARGET_RECOVERY_ROOT_OUT)/system/etc/recovery.fstab;)
 	$(if $(strip $(recovery_wipe)), \
 	  cp -f $(recovery_wipe) $(TARGET_RECOVERY_ROOT_OUT)/system/etc/recovery.wipe)
 	ln -sf prop.default $(TARGET_RECOVERY_ROOT_OUT)/default.prop
@@ -2741,8 +2770,13 @@ $(INTERNAL_RECOVERY_RAMDISK_FILES_TIMESTAMP): $(MKBOOTFS) $(COMPRESSION_COMMAND_
 	$(BOARD_RECOVERY_IMAGE_PREPARE)
 	$(hide) touch $@
 
-$(recovery_ramdisk): $(INTERNAL_RECOVERY_RAMDISK_FILES_TIMESTAMP)
-	$(MKBOOTFS) -d $(TARGET_OUT) $(TARGET_RECOVERY_ROOT_OUT) | $(COMPRESSION_COMMAND) > $(recovery_ramdisk)
+$(recovery_uncompressed_ramdisk): $(INTERNAL_RECOVERY_RAMDISK_FILES_TIMESTAMP)
+	@echo ----- Making uncompressed recovery ramdisk ------
+	$(MKBOOTFS) -d $(TARGET_OUT) $(TARGET_RECOVERY_ROOT_OUT) > $@
+
+$(recovery_ramdisk): $(recovery_uncompressed_ramdisk) $(COMPRESSION_COMMAND_DEPS)
+	@echo ----- Making compressed recovery ramdisk ------
+	$(COMPRESSION_COMMAND) < $(recovery_uncompressed_ramdisk) > $@
 
 # $(1): output file
 # $(2): optional kernel file
@@ -2798,9 +2832,13 @@ $(call declare-container-license-deps,$(INSTALLED_BOOTIMAGE_TARGET),$(recoveryim
 UNMOUNTED_NOTICE_VENDOR_DEPS+= $(INSTALLED_BOOTIMAGE_TARGET)
 endif # BOARD_USES_RECOVERY_AS_BOOT
 
-$(INSTALLED_RECOVERYIMAGE_TARGET): $(recoveryimage-deps)
+ifndef BOARD_CUSTOM_BOOTIMG_MK
+$(INSTALLED_RECOVERYIMAGE_TARGET): $(recoveryimage-deps) $(RECOVERYIMAGE_EXTRA_DEPS)
 	$(call build-recoveryimage-target, $@, \
 	  $(if $(filter true, $(BOARD_EXCLUDE_KERNEL_FROM_RECOVERY_IMAGE)),, $(recovery_kernel)))
+else
+INTERNAL_RECOVERYIMAGE_ARGS += --kernel $(recovery_kernel)
+endif # BOARD_CUSTOM_BOOTIMG_MK
 
 ifdef RECOVERY_RESOURCE_ZIP
 $(RECOVERY_RESOURCE_ZIP): $(INSTALLED_RECOVERYIMAGE_TARGET) | $(ZIPTIME)
@@ -2836,6 +2874,9 @@ ifneq ($(BOARD_NAND_SPARE_SIZE),)
 $(error MTD device is no longer supported and thus BOARD_NAND_SPARE_SIZE is deprecated.)
 endif
 
+ifdef BOARD_CUSTOM_BOOTIMG_MK
+include $(BOARD_CUSTOM_BOOTIMG_MK)
+endif
 
 # -----------------------------------------------------------------
 # Build debug ramdisk and debug boot image.
@@ -3423,12 +3464,14 @@ endef
 #   $(2): The partition's staging directory
 #   $(3): Files to include in the partition
 define write-partition-file-list
+$(1): PRIVATE_FILES := $(subst $(2)/,,$(filter $(2)/%,$(3)))
+$(1): PRIVATE_EXTRA_INSTALL_ZIPS := $(call relevant-extra-install-zips,$(filter $(2)/%,$(3)))
 $(1): $$(HOST_OUT_EXECUTABLES)/extra_install_zips_file_list $(foreach p,$(call relevant-extra-install-zips,$(filter $(2)/%,$(3))),$(call word-colon,3,$(p)))
 	@echo Writing $$@
 	rm -f $$@
 	echo -n > $$@
-	$$(foreach f,$(subst $(2)/,,$(filter $(2)/%,$(3))),echo "$$(f)" >> $$@$$(newline))
-	$$(HOST_OUT_EXECUTABLES)/extra_install_zips_file_list $(2) $(call relevant-extra-install-zips,$(filter $(2)/%,$(3))) >> $$@
+	$$(foreach f,$$(PRIVATE_FILES),echo "$$(f)" >> $$@$$(newline))
+	$$(HOST_OUT_EXECUTABLES)/extra_install_zips_file_list $(2) $$(PRIVATE_EXTRA_INSTALL_ZIPS) >> $$@
 endef
 
 # -----------------------------------------------------------------
@@ -3523,7 +3566,8 @@ INSTALLED_SYSTEMIMAGE := $(INSTALLED_SYSTEMIMAGE_TARGET)
 ifneq ($(INSTALLED_BOOTIMAGE_TARGET),)
 ifneq ($(INSTALLED_RECOVERYIMAGE_TARGET),)
 ifneq ($(BOARD_USES_FULL_RECOVERY_IMAGE),true)
-ifneq (,$(filter true,$(BOARD_INCLUDE_RECOVERY_DTBO) $(BOARD_INCLUDE_RECOVERY_ACPIO)))
+ifneq (,$(filter true,$(BOARD_INCLUDE_RECOVERY_DTBO) $(BOARD_INCLUDE_RECOVERY_ACPIO) \
+      $(BOARD_RAMDISK_USE_LZ4) $(BOARD_RAMDISK_USE_XZ)))
 diff_tool := $(HOST_OUT_EXECUTABLES)/bsdiff
 else
 diff_tool := $(HOST_OUT_EXECUTABLES)/imgdiff
@@ -5844,6 +5888,9 @@ endif
 ifeq ($(BOARD_RAMDISK_USE_LZ4),true)
 	echo "lz4_ramdisks=true" >> $@
 endif
+ifeq ($(BOARD_RAMDISK_USE_XZ),true)
+	echo "xz_ramdisks=true" >> $@
+endif
 ifneq ($(INSTALLED_VENDOR_BOOTIMAGE_TARGET),)
 	echo "vendor_boot=true" >> $@
 	echo "vendor_boot_size=$(BOARD_VENDOR_BOOTIMAGE_PARTITION_SIZE)" >> $@
@@ -5898,6 +5945,9 @@ endif
 ifeq ($(BOARD_USES_FULL_RECOVERY_IMAGE),true)
 	$(hide) echo "full_recovery_image=true" >> $@
 endif
+ifdef BUILDING_VENDOR_IMAGE
+	$(hide) echo "board_builds_vendorimage=true" >> $@
+endif
 ifdef BOARD_USES_VENDORIMAGE
 	$(hide) echo "board_uses_vendorimage=true" >> $@
 endif
@@ -6043,6 +6093,9 @@ endif
 ifeq ($(BUILDING_WITH_VSDK),true)
 	$(hide) echo "building_with_vsdk=true" >> $@
 endif
+ifneq ($(TARGET_OTA_ASSERT_DEVICE),)
+	$(hide) echo "ota_override_device=$(TARGET_OTA_ASSERT_DEVICE)" >> $@
+endif
 
 $(call declare-0p-target,$(INSTALLED_FASTBOOT_INFO_TARGET))
 
@@ -6296,6 +6349,10 @@ ifdef BUILDING_VENDOR_BOOT_IMAGE
   endif
 endif
 
+ifdef BUILDING_VENDOR_KERNEL_BOOT_IMAGE
+  $(BUILT_TARGET_FILES_PACKAGE): $(INSTALLED_FILES_FILE_VENDOR_KERNEL_RAMDISK)
+endif
+
 ifdef BUILDING_RECOVERY_IMAGE
   # TODO(b/30414428): Can't depend on INTERNAL_RECOVERYIMAGE_FILES alone like other
   # BUILT_TARGET_FILES_PACKAGE dependencies because currently there're cp/rsync/rm
@@ -6406,6 +6463,7 @@ $(BUILT_TARGET_FILES_DIR): \
 	    $(INSTALLED_PVMFW_EMBEDDED_AVBKEY_TARGET) \
 	    $(INSTALLED_CUSTOMIMAGES_TARGET) \
 	    $(INSTALLED_ANDROID_INFO_TXT_TARGET) \
+	    $(INSTALLED_RECOVERY_KERNEL_TARGET) \
 	    $(INSTALLED_KERNEL_TARGET) \
 	    $(INSTALLED_RAMDISK_TARGET) \
 	    $(INSTALLED_DTBIMAGE_TARGET) \
@@ -6449,12 +6507,12 @@ ifneq (true,$(BOARD_INCLUDE_RECOVERY_RAMDISK_IN_VENDOR_BOOT))
 	$(hide) $(call package_files-copy-root, \
 	    $(TARGET_RECOVERY_ROOT_OUT),$(zip_root)/$(PRIVATE_RECOVERY_OUT)/RAMDISK)
 endif
-ifdef INSTALLED_KERNEL_TARGET
-ifneq (,$(filter true,$(BOARD_USES_RECOVERY_AS_BOOT)))
-	cp $(INSTALLED_KERNEL_TARGET) $(zip_root)/$(PRIVATE_RECOVERY_OUT)/
-else ifneq (true,$(BOARD_EXCLUDE_KERNEL_FROM_RECOVERY_IMAGE))
-	cp $(firstword $(INSTALLED_KERNEL_TARGET)) $(zip_root)/$(PRIVATE_RECOVERY_OUT)/kernel
-endif
+	@# OTA install helpers
+	$(hide) $(call package_files-copy-root, \
+	    $(PRODUCT_OUT)/install,$(zip_root)/INSTALL)
+ifdef INSTALLED_RECOVERY_KERNEL_TARGET
+	# The python script that wraps it all up wants it to be named kernel, so do that
+	cp $(INSTALLED_RECOVERY_KERNEL_TARGET) $(zip_root)/$(PRIVATE_RECOVERY_OUT)/kernel
 endif
 ifneq (truetrue,$(strip $(BUILDING_VENDOR_BOOT_IMAGE))$(strip $(BOARD_USES_RECOVERY_AS_BOOT)))
 ifdef INSTALLED_2NDBOOTLOADER_TARGET
@@ -6484,6 +6542,9 @@ endif
 ifdef BOARD_KERNEL_PAGESIZE
 	echo "$(BOARD_KERNEL_PAGESIZE)" > $(zip_root)/$(PRIVATE_RECOVERY_OUT)/pagesize
 endif
+ifeq ($(strip $(BOARD_KERNEL_SEPARATED_DT)),true)
+	$(hide) $(ACP) $(INSTALLED_DTIMAGE_TARGET) $(zip_root)/$(PRIVATE_RECOVERY_OUT)/dt
+endif
 endif # not (BUILDING_VENDOR_BOOT_IMAGE and BOARD_USES_RECOVERY_AS_BOOT)
 endif # INSTALLED_RECOVERYIMAGE_TARGET defined or BOARD_USES_RECOVERY_AS_BOOT is true
 	@# Components of the boot image
@@ -6514,6 +6575,9 @@ endif
 ifdef BOARD_KERNEL_PAGESIZE
 	echo "$(BOARD_KERNEL_PAGESIZE)" > $(zip_root)/BOOT/pagesize
 endif
+ifeq ($(strip $(BOARD_KERNEL_SEPARATED_DT)),true)
+	$(hide) $(ACP) $(INSTALLED_DTIMAGE_TARGET) $(zip_root)/BOOT/dt
+endif
 endif # INSTALLED_VENDOR_BOOTIMAGE_TARGET == "" && BOARD_USES_GENERIC_KERNEL_IMAGE != true
 endif # BOARD_USES_RECOVERY_AS_BOOT not true
 	$(hide) $(foreach t,$(INSTALLED_RADIOIMAGE_TARGET),\
@@ -6563,6 +6627,14 @@ ifdef BOARD_KERNEL_PAGESIZE
 	echo "$(BOARD_KERNEL_PAGESIZE)" > $(zip_root)/VENDOR_KERNEL_BOOT/pagesize
 endif
 endif # INSTALLED_VENDOR_BOOTIMAGE_TARGET
+ifdef BOARD_CUSTOM_BOOTIMG
+	@# Prebuilt boot images
+	$(hide) mkdir -p $(zip_root)/BOOTABLE_IMAGES
+	$(hide) $(ACP) $(INSTALLED_BOOTIMAGE_TARGET) $(zip_root)/BOOTABLE_IMAGES/
+ifneq ($(INSTALLED_RECOVERYIMAGE_TARGET),)
+	$(hide) $(ACP) $(INSTALLED_RECOVERYIMAGE_TARGET) $(zip_root)/BOOTABLE_IMAGES/
+endif
+endif
 ifdef BUILDING_SYSTEM_IMAGE
 	@# Contents of the system image
 	$(hide) $(call package_files-copy-root, \
@@ -6936,6 +7008,7 @@ PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$(dir $(ZIP2ZIP)):$$PATH \
     $(OTA_FROM_TARGET_FILES) \
         --verbose \
         --path $(HOST_OUT) \
+        --backup=$(backuptool) \
         $(if $(OEM_OTA_CONFIG), --oem_settings $(OEM_OTA_CONFIG)) \
         $(if $(BOOT_VAR_OTA_CONFIG), --boot_variable_file $(BOOT_VAR_OTA_CONFIG)) \
         $(2) \
@@ -6953,6 +7026,16 @@ INTERNAL_OTA_METADATA := $(PRODUCT_OUT)/ota_metadata
 
 $(call declare-0p-target,$(INTERNAL_OTA_METADATA))
 
+ifeq ($(TARGET_BUILD_VARIANT),user)
+    $(INTERNAL_OTA_PACKAGE_TARGET): backuptool := false
+else
+ifneq ($(TEQUILA_BUILD),)
+    $(INTERNAL_OTA_PACKAGE_TARGET): backuptool := true
+else
+    $(INTERNAL_OTA_PACKAGE_TARGET): backuptool := false
+endif
+endif
+
 $(INTERNAL_OTA_PACKAGE_TARGET): KEY_CERT_PAIR := $(DEFAULT_KEY_CERT_PAIR)
 $(INTERNAL_OTA_PACKAGE_TARGET): .KATI_IMPLICIT_OUTPUTS := $(INTERNAL_OTA_METADATA)
 $(INTERNAL_OTA_PACKAGE_TARGET): $(BUILT_TARGET_FILES_DIR) $(OTA_FROM_TARGET_FILES) $(INTERNAL_OTATOOLS_FILES)
@@ -7311,7 +7394,7 @@ ifeq (true,$(PRODUCT_BUILD_SUPER_PARTITION))
 # BOARD_SUPER_PARTITION_SIZE must be defined to build super image.
 ifneq ($(BOARD_SUPER_PARTITION_SIZE),)
 
-ifneq (true,$(PRODUCT_RETROFIT_DYNAMIC_PARTITIONS))
+ifeq ($(words $(BOARD_SUPER_PARTITION_BLOCK_DEVICES)),1)
 
 # For real devices and for dist builds, build super image from target files to an intermediate directory.
 INTERNAL_SUPERIMAGE_DIST_TARGET := $(call intermediates-dir-for,PACKAGING,super.img)/super.img
@@ -7329,7 +7412,7 @@ endif
 .PHONY: superimage_dist
 superimage_dist: $(INTERNAL_SUPERIMAGE_DIST_TARGET)
 
-endif # PRODUCT_RETROFIT_DYNAMIC_PARTITIONS != "true"
+endif # $(words $(BOARD_SUPER_PARTITION_BLOCK_DEVICES)) == 1
 endif # BOARD_SUPER_PARTITION_SIZE != ""
 endif # PRODUCT_BUILD_SUPER_PARTITION == "true"
 
@@ -7338,7 +7421,7 @@ endif # PRODUCT_BUILD_SUPER_PARTITION == "true"
 
 ifeq (true,$(PRODUCT_BUILD_SUPER_PARTITION))
 ifneq ($(BOARD_SUPER_PARTITION_SIZE),)
-ifneq (true,$(PRODUCT_RETROFIT_DYNAMIC_PARTITIONS))
+ifeq ($(words $(BOARD_SUPER_PARTITION_BLOCK_DEVICES)),1)
 
 # Build super.img by using $(INSTALLED_*IMAGE_TARGET) to $(1)
 # $(1): built image path
@@ -7393,7 +7476,7 @@ superimage-nodeps supernod: | $(INSTALLED_SUPERIMAGE_DEPENDENCIES)
 	$(call build-superimage-target,$(INSTALLED_SUPERIMAGE_TARGET),\
 	  $(call intermediates-dir-for,PACKAGING,superimage-nodeps)/misc_info.txt)
 
-endif # PRODUCT_RETROFIT_DYNAMIC_PARTITIONS != "true"
+endif # $(words $(BOARD_SUPER_PARTITION_BLOCK_DEVICES)) == 1
 endif # BOARD_SUPER_PARTITION_SIZE != ""
 endif # PRODUCT_BUILD_SUPER_PARTITION == "true"
 

core/android_soong_config_vars.mk

@@ -29,6 +29,7 @@ $(call add_soong_config_namespace,ANDROID)
 $(call add_soong_config_var,ANDROID,BOARD_USES_ODMIMAGE)
 $(call add_soong_config_var,ANDROID,BOARD_USES_RECOVERY_AS_BOOT)
 $(call add_soong_config_var,ANDROID,CHECK_DEV_TYPE_VIOLATIONS)
+$(call add_soong_config_var,ANDROID,PLATFORM_SEPOLICY_VERSION)
 $(call add_soong_config_var,ANDROID,PLATFORM_SEPOLICY_COMPAT_VERSIONS)
 $(call add_soong_config_var,ANDROID,PRODUCT_INSTALL_DEBUG_POLICY_TO_SYSTEM_EXT)
 $(call add_soong_config_var,ANDROID,TARGET_DYNAMIC_64_32_DRMSERVER)
@@ -36,7 +37,7 @@ $(call add_soong_config_var,ANDROID,TARGET_ENABLE_MEDIADRM_64)
 $(call add_soong_config_var,ANDROID,TARGET_DYNAMIC_64_32_MEDIASERVER)
 
 # PRODUCT_PRECOMPILED_SEPOLICY defaults to true. Explicitly check if it's "false" or not.
-$(call add_soong_config_var_value,ANDROID,PRODUCT_PRECOMPILED_SEPOLICY,$(if $(filter false,$(PRODUCT_PRECOMPILED_SEPOLICY)),false,true))
+$(call soong_config_set_bool,ANDROID,PRODUCT_PRECOMPILED_SEPOLICY,$(if $(filter false,$(PRODUCT_PRECOMPILED_SEPOLICY)),false,true))
 
 ifdef ART_DEBUG_OPT_FLAG
 $(call soong_config_set,art_module,art_debug_opt_flag,$(ART_DEBUG_OPT_FLAG))

core/binary.mk

@@ -44,6 +44,33 @@ endif
 
 my_soong_problems :=
 
+# Automatically replace the old-style kernel header include with a dependency
+# on the generated_kernel_headers header library when building inline
+ifeq ($(INLINE_KERNEL_BUILDING),true)
+ifneq (,$(findstring $(TARGET_OUT_INTERMEDIATES)/KERNEL_OBJ/usr/include,$(LOCAL_C_INCLUDES)))
+  LOCAL_C_INCLUDES := $(patsubst $(TARGET_OUT_INTERMEDIATES)/KERNEL_OBJ/usr/include,,$(LOCAL_C_INCLUDES))
+  LOCAL_HEADER_LIBRARIES += generated_kernel_headers
+endif
+
+# Some qcom binaries use this weird -isystem include...
+ifneq (,$(findstring $(TARGET_OUT_INTERMEDIATES)/KERNEL_OBJ/usr/include,$(LOCAL_CFLAGS)))
+  LOCAL_CFLAGS := $(patsubst -isystem $(TARGET_OUT_INTERMEDIATES)/KERNEL_OBJ/usr/include,,$(LOCAL_CFLAGS))
+  LOCAL_HEADER_LIBRARIES += generated_kernel_headers
+endif
+
+# Remove KERNEL_OBJ/usr from any LOCAL_ADDITIONAL_DEPENDENCIES, we will
+# just include generated_kernel_headers which already has the proper
+# dependency
+ifneq (,$(findstring $(TARGET_OUT_INTERMEDIATES)/KERNEL_OBJ/usr,$(LOCAL_ADDITIONAL_DEPENDENCIES)))
+  LOCAL_ADDITIONAL_DEPENDENCIES := $(patsubst $(TARGET_OUT_INTERMEDIATES)/KERNEL_OBJ/usr,,$(LOCAL_ADDITIONAL_DEPENDENCIES))
+endif
+
+# Replace device_kernel_headers with generated_kernel_headers
+ifneq (,$(findstring device_kernel_headers,$(LOCAL_HEADER_LIBRARIES)))
+  LOCAL_HEADER_LIBRARIES := $(patsubst device_kernel_headers,generated_kernel_headers,$(LOCAL_HEADER_LIBRARIES))
+endif
+endif
+
 # The following LOCAL_ variables will be modified in this file.
 # Because the same LOCAL_ variables may be used to define modules for both 1st arch and 2nd arch,
 # we can't modify them in place.
@@ -1407,6 +1434,11 @@ my_tracked_gen_files :=
 $(foreach f,$(my_tracked_src_files),$(eval my_src_file_obj_$(s):=))
 my_tracked_src_files :=
 
+## Allow a device's own headers to take precedence over global ones
+ifneq ($(TARGET_SPECIFIC_HEADER_PATH),)
+my_c_includes := $(TOPDIR)$(TARGET_SPECIFIC_HEADER_PATH) $(my_c_includes)
+endif
+
 my_c_includes += $(TOPDIR)$(LOCAL_PATH) $(intermediates) $(generated_sources_dir)
 
 my_c_includes := $(foreach inc,$(my_c_includes),$(call clean-path,$(inc)))

core/config.mk

@@ -316,6 +316,19 @@ $(call soong_config_define_internal,$1,$2) \
 $(eval SOONG_CONFIG_$(strip $1)_$(strip $2):=$(strip $3))
 endef
 
+# soong_config_set_bool is the same as soong_config_set, but it will
+# also type the variable as a bool, so that when using select() expressions
+# in blueprint files they can use boolean values instead of strings.
+# It will only accept "true" for its value, any other value will be
+# treated as false.
+# $1 is the namespace. $2 is the variable name. $3 is the variable value.
+# Ex: $(call soong_config_set_bool,acme,COOL_FEATURE,true)
+define soong_config_set_bool
+$(call soong_config_define_internal,$1,$2) \
+$(eval SOONG_CONFIG_$(strip $1)_$(strip $2):=$(filter true,$3))
+$(eval SOONG_CONFIG_TYPE_$(strip $1)_$(strip $2):=bool)
+endef
+
 # soong_config_append appends to the value of the variable in the given Soong
 # config namespace. If the variable does not exist, it will be defined. If the
 # namespace does not  exist, it will be defined.
@@ -440,6 +453,10 @@ endif
 # See envsetup.mk for a description of SCAN_EXCLUDE_DIRS
 FIND_LEAVES_EXCLUDES := $(addprefix --prune=, $(SCAN_EXCLUDE_DIRS) .repo .git)
 
+ifneq ($(TEQUILA_BUILD),)
+include vendor/tequila/config/BoardConfigtequila.mk
+endif
+
 # The build system exposes several variables for where to find the kernel
 # headers:
 #   TARGET_DEVICE_KERNEL_HEADERS is automatically created for the current
@@ -1243,21 +1260,60 @@ BUILD_WARNING_BAD_OPTIONAL_USES_LIBS_ALLOWLIST := LegacyCamera Gallery2
 # in the source tree.
 dont_bother_goals := out product-graph
 
+ifeq ($(TARGET_SYSTEM_PROP),)
+TARGET_SYSTEM_PROP := $(wildcard $(TARGET_DEVICE_DIR)/system.prop)
+endif
+
+ifeq ($(TARGET_SYSTEM_EXT_PROP),)
+TARGET_SYSTEM_EXT_PROP := $(wildcard $(TARGET_DEVICE_DIR)/system_ext.prop)
+endif
+
+ifeq ($(TARGET_PRODUCT_PROP),)
+TARGET_PRODUCT_PROP := $(wildcard $(TARGET_DEVICE_DIR)/product.prop)
+endif
+
+ifeq ($(TARGET_ODM_PROP),)
+TARGET_ODM_PROP := $(wildcard $(TARGET_DEVICE_DIR)/odm.prop)
+endif
+
+.KATI_READONLY := \
+    TARGET_SYSTEM_PROP \
+    TARGET_SYSTEM_EXT_PROP \
+    TARGET_PRODUCT_PROP \
+    TARGET_ODM_PROP \
+
 include $(BUILD_SYSTEM)/sysprop_config.mk
 
 # Make ANDROID Soong config variables visible to Android.mk files, for
 # consistency with those defined in BoardConfig.mk files.
 include $(BUILD_SYSTEM)/android_soong_config_vars.mk
 
+ifneq ($(TEQUILA_BUILD),)
+ifneq ($(wildcard device/tequila/sepolicy/common/sepolicy.mk),)
+## We need to be sure the global selinux policies are included
+## last, to avoid accidental resetting by device configs
+$(eval include device/tequila/sepolicy/common/sepolicy.mk)
+endif
+endif
+
+SOONG_VARIABLES := $(SOONG_OUT_DIR)/soong.$(TARGET_PRODUCT).variables
+SOONG_EXTRA_VARIABLES := $(SOONG_OUT_DIR)/soong.$(TARGET_PRODUCT).extra.variables
+
 ifeq ($(CALLED_FROM_SETUP),true)
 include $(BUILD_SYSTEM)/ninja_config.mk
 include $(BUILD_SYSTEM)/soong_config.mk
 endif
 
+SOONG_VARIABLES :=
+SOONG_EXTRA_VARIABLES :=
+
 -include external/ltp/android/ltp_package_list.mk
 DEFAULT_DATA_OUT_MODULES := ltp $(ltp_packages)
 .KATI_READONLY := DEFAULT_DATA_OUT_MODULES
 
+# Include any vendor specific config.mk file
+-include vendor/*/build/core/config.mk
+
 include $(BUILD_SYSTEM)/dumpvar.mk
 
 ifdef BOARD_VNDK_VERSION

core/definitions.mk

@@ -3932,6 +3932,7 @@ $(foreach source,$(ENFORCE_RRO_SOURCES), \
   $(eval enforce_rro_partition := $(word 6,$(_o))) \
   $(eval include $(BUILD_SYSTEM)/generate_enforce_rro.mk) \
   $(eval ALL_MODULES.$$(enforce_rro_source_module).REQUIRED_FROM_TARGET += $$(LOCAL_PACKAGE_NAME)) \
+  $(eval ENFORCE_RRO_PACKAGES_$$(call to-upper,$(enforce_rro_partition)) += $$(LOCAL_PACKAGE_NAME)) \
 )
 endef
 

core/main.mk

@@ -252,6 +252,8 @@ $(readonly-final-product-vars)
 
 ifneq ($(PRODUCT_ENFORCE_RRO_TARGETS),)
 ENFORCE_RRO_SOURCES :=
+ENFORCE_RRO_PACKAGES_PRODUCT :=
+ENFORCE_RRO_PACKAGES_VENDOR :=
 endif
 
 # Color-coded warnings including current module info
@@ -325,6 +327,22 @@ endef
 # -------------------------------------------------------------------
 ifneq ($(PRODUCT_ENFORCE_RRO_TARGETS),)
 $(call generate_all_enforce_rro_packages)
+
+_modules_with_rro_suffix :=
+$(foreach m,$(PRODUCT_PACKAGES), \
+  $(eval _modules_with_rro_suffix += $$(m)__$(PRODUCT_NAME)__auto_generated_rro_%))
+
+include $(CLEAR_VARS)
+LOCAL_MODULE := enforce_rro_packages_product
+LOCAL_MODULE_TAGS := optional
+LOCAL_REQUIRED_MODULES := $(filter $(_modules_with_rro_suffix),$(ENFORCE_RRO_PACKAGES_PRODUCT))
+include $(BUILD_PHONY_PACKAGE)
+
+include $(CLEAR_VARS)
+LOCAL_MODULE := enforce_rro_packages_vendor
+LOCAL_MODULE_TAGS := optional
+LOCAL_REQUIRED_MODULES := $(filter $(_modules_with_rro_suffix),$(ENFORCE_RRO_PACKAGES_VENDOR))
+include $(BUILD_PHONY_PACKAGE)
 endif
 
 # -------------------------------------------------------------------

core/pathmap.mk

@@ -92,3 +92,5 @@ FRAMEWORKS_BASE_SUBDIRS := \
 #
 FRAMEWORKS_BASE_JAVA_SRC_DIRS := \
 	$(addprefix frameworks/base/,$(FRAMEWORKS_BASE_SUBDIRS))
+
+-include vendor/tequila/build/core/pathmap.mk

core/product.mk

@@ -550,12 +550,15 @@ endef
 
 # Makes including non-existent modules in PRODUCT_PACKAGES an error.
 # $(1): list of non-existent modules to allow.
+define enforce-product-packages-exist-internal
+  $(eval PRODUCTS.$(1).PRODUCT_ENFORCE_PACKAGES_EXIST := true) \
+  $(eval PRODUCTS.$(1).PRODUCT_ENFORCE_PACKAGES_EXIST_ALLOW_LIST := $(2)) \
+  $(eval .KATI_READONLY := PRODUCTS.$(1).PRODUCT_ENFORCE_PACKAGES_EXIST) \
+  $(eval .KATI_READONLY := PRODUCTS.$(1).PRODUCT_ENFORCE_PACKAGES_EXIST_ALLOW_LIST)
+endef
 define enforce-product-packages-exist
   $(eval current_mk := $(strip $(word 1,$(_include_stack)))) \
-  $(eval PRODUCTS.$(current_mk).PRODUCT_ENFORCE_PACKAGES_EXIST := true) \
-  $(eval PRODUCTS.$(current_mk).PRODUCT_ENFORCE_PACKAGES_EXIST_ALLOW_LIST := $(1)) \
-  $(eval .KATI_READONLY := PRODUCTS.$(current_mk).PRODUCT_ENFORCE_PACKAGES_EXIST) \
-  $(eval .KATI_READONLY := PRODUCTS.$(current_mk).PRODUCT_ENFORCE_PACKAGES_EXIST_ALLOW_LIST)
+  $(enforce-product-packages-exist-internal,$(current_mk),$(1))
 endef
 
 #
@@ -597,9 +600,11 @@ _readonly_late_variables := \
 
 # Modified internally in the build system
 _readonly_late_variables += \
+  PRODUCT_CFI_INCLUDE_PATHS \
   PRODUCT_COPY_FILES \
   PRODUCT_DEX_PREOPT_NEVER_ALLOW_STRIPPING \
   PRODUCT_DEX_PREOPT_BOOT_FLAGS \
+  PRODUCT_SOONG_NAMESPACES
 
 _readonly_early_variables := $(filter-out $(_readonly_late_variables),$(_product_var_list))
 

core/soong_config.mk

@@ -1,5 +1,4 @@
 SOONG_MAKEVARS_MK := $(SOONG_OUT_DIR)/make_vars-$(TARGET_PRODUCT).mk
-SOONG_VARIABLES := $(SOONG_OUT_DIR)/soong.$(TARGET_PRODUCT).variables
 SOONG_ANDROID_MK := $(SOONG_OUT_DIR)/Android-$(TARGET_PRODUCT).mk
 
 include $(BUILD_SYSTEM)/art_config.mk
@@ -30,6 +29,7 @@ $(call json_start)
 $(call add_json_str,  Make_suffix, -$(TARGET_PRODUCT))
 
 $(call add_json_str,  BuildId,                           $(BUILD_ID))
+$(call add_json_str,  BuildFingerprintFile,              build_fingerprint.txt)
 $(call add_json_str,  BuildNumberFile,                   build_number.txt)
 $(call add_json_str,  BuildHostnameFile,                 build_hostname.txt)
 $(call add_json_str,  BuildThumbprintFile,               build_thumbprint.txt)
@@ -147,12 +147,16 @@ $(call add_json_list, NativeCoverageExcludePaths,        $(NATIVE_COVERAGE_EXCLU
 $(call add_json_bool, ArtUseReadBarrier,                 $(call invert_bool,$(filter false,$(PRODUCT_ART_USE_READ_BARRIER))))
 $(call add_json_str,  BtConfigIncludeDir,                $(BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR))
 $(call add_json_list, DeviceKernelHeaders,               $(TARGET_DEVICE_KERNEL_HEADERS) $(TARGET_BOARD_KERNEL_HEADERS) $(TARGET_PRODUCT_KERNEL_HEADERS))
+$(call add_json_str,  TargetSpecificHeaderPath,          $(TARGET_SPECIFIC_HEADER_PATH))
 $(call add_json_str,  VendorApiLevel,                    $(BOARD_API_LEVEL))
 $(call add_json_list, ExtraVndkVersions,                 $(PRODUCT_EXTRA_VNDK_VERSIONS))
 $(call add_json_list, DeviceSystemSdkVersions,           $(BOARD_SYSTEMSDK_VERSIONS))
 $(call add_json_str,  RecoverySnapshotVersion,           $(RECOVERY_SNAPSHOT_VERSION))
 $(call add_json_list, Platform_systemsdk_versions,       $(PLATFORM_SYSTEMSDK_VERSIONS))
 $(call add_json_bool, Malloc_low_memory,                 $(findstring true,$(MALLOC_SVELTE) $(MALLOC_LOW_MEMORY)))
+$(call add_json_bool, Malloc_low_memory_libc32,          $(if $(MALLOC_SVELTE_FOR_LIBC32),\
+                                                            $(filter true,$(MALLOC_SVELTE_FOR_LIBC32)),\
+                                                            $(findstring true,$(MALLOC_SVELTE) $(MALLOC_LOW_MEMORY))))
 $(call add_json_bool, Malloc_zero_contents,              $(call invert_bool,$(filter false,$(MALLOC_ZERO_CONTENTS))))
 $(call add_json_bool, Malloc_pattern_fill_contents,      $(MALLOC_PATTERN_FILL_CONTENTS))
 $(call add_json_str,  Override_rs_driver,                $(OVERRIDE_RS_DRIVER))
@@ -262,6 +266,18 @@ $(foreach namespace,$(sort $(SOONG_CONFIG_NAMESPACES)),\
   $(call end_json_map))
 $(call end_json_map)
 
+# Add the types of the variables in VendorVars. Since this is much newer
+# than VendorVars, which has a history of just using string values for everything,
+# variables are assumed to be strings by default. For strings, SOONG_CONFIG_TYPE_*
+# will not be set, and they will not have an entry in the VendorVarTypes map.
+$(call add_json_map, VendorVarTypes)
+$(foreach namespace,$(sort $(SOONG_CONFIG_NAMESPACES)),\
+  $(call add_json_map, $(namespace))\
+  $(foreach key,$(sort $(SOONG_CONFIG_$(namespace))),\
+    $(if $(SOONG_CONFIG_TYPE_$(namespace)_$(key)),$(call add_json_str,$(key),$(subst ",\",$(SOONG_CONFIG_TYPE_$(namespace)_$(key))))))\
+  $(call end_json_map))
+$(call end_json_map)
+
 $(call add_json_bool, EnforceProductPartitionInterface,  $(filter true,$(PRODUCT_ENFORCE_PRODUCT_PARTITION_INTERFACE)))
 $(call add_json_str,  DeviceCurrentApiLevelForVendorModules,  $(BOARD_CURRENT_API_LEVEL_FOR_VENDOR_MODULES))
 
@@ -297,6 +313,7 @@ $(call add_json_bool, BuildBrokenVendorPropertyNamespace,  $(filter true,$(BUILD
 $(call add_json_bool, BuildBrokenIncorrectPartitionImages, $(filter true,$(BUILD_BROKEN_INCORRECT_PARTITION_IMAGES)))
 $(call add_json_list, BuildBrokenInputDirModules,          $(BUILD_BROKEN_INPUT_DIR_MODULES))
 $(call add_json_bool, BuildBrokenDontCheckSystemSdk,       $(filter true,$(BUILD_BROKEN_DONT_CHECK_SYSTEMSDK)))
+$(call add_json_bool, BuildBrokenDupSysprop,               $(filter true,$(BUILD_BROKEN_DUP_SYSPROP)))
 
 $(call add_json_list, BuildWarningBadOptionalUsesLibsAllowlist,    $(BUILD_WARNING_BAD_OPTIONAL_USES_LIBS_ALLOWLIST))
 
@@ -346,6 +363,22 @@ $(call add_json_bool, BoardUseVbmetaDigestInFingerprint, $(filter true,$(BOARD_U
 
 $(call add_json_list, OemProperties, $(PRODUCT_OEM_PROPERTIES))
 
+$(call add_json_list, SystemPropFiles, $(TARGET_SYSTEM_PROP))
+$(call add_json_list, SystemExtPropFiles, $(TARGET_SYSTEM_EXT_PROP))
+$(call add_json_list, ProductPropFiles, $(TARGET_PRODUCT_PROP))
+$(call add_json_list, OdmPropFiles, $(TARGET_ODM_PROP))
+
+# Do not set ArtTargetIncludeDebugBuild into any value if PRODUCT_ART_TARGET_INCLUDE_DEBUG_BUILD is not set,
+# to have the same behavior from runtime_libart.mk.
+ifneq ($(PRODUCT_ART_TARGET_INCLUDE_DEBUG_BUILD),)
+$(call add_json_bool, ArtTargetIncludeDebugBuild, $(PRODUCT_ART_TARGET_INCLUDE_DEBUG_BUILD))
+endif
+
+_config_enable_uffd_gc := \
+  $(firstword $(OVERRIDE_ENABLE_UFFD_GC) $(PRODUCT_ENABLE_UFFD_GC) default)
+$(call add_json_str, EnableUffdGc, $(_config_enable_uffd_gc))
+_config_enable_uffd_gc :=
+
 $(call json_end)
 
 $(file >$(SOONG_VARIABLES).tmp,$(json_contents))
@@ -356,4 +389,6 @@ $(shell if ! cmp -s $(SOONG_VARIABLES).tmp $(SOONG_VARIABLES); then \
 	  rm $(SOONG_VARIABLES).tmp; \
 	fi)
 
+include $(BUILD_SYSTEM)/soong_extra_config.mk
+
 endif # CONFIGURE_SOONG

core/soong_extra_config.mk

@@ -0,0 +1,108 @@
+$(call json_start)
+
+$(call add_json_str, DeviceCpuVariantRuntime,           $(TARGET_CPU_VARIANT_RUNTIME))
+$(call add_json_str, DeviceAbiList,                     $(TARGET_CPU_ABI_LIST))
+$(call add_json_str, DeviceAbiList32,                   $(TARGET_CPU_ABI_LIST_32_BIT))
+$(call add_json_str, DeviceAbiList64,                   $(TARGET_CPU_ABI_LIST_64_BIT))
+$(call add_json_str, DeviceSecondaryCpuVariantRuntime,  $(TARGET_2ND_CPU_VARIANT_RUNTIME))
+
+$(call add_json_str, Dex2oatTargetCpuVariantRuntime,         $(DEX2OAT_TARGET_CPU_VARIANT_RUNTIME))
+$(call add_json_str, Dex2oatTargetInstructionSetFeatures,    $(DEX2OAT_TARGET_INSTRUCTION_SET_FEATURES))
+$(call add_json_str, SecondaryDex2oatCpuVariantRuntime,      $($(TARGET_2ND_ARCH_VAR_PREFIX)DEX2OAT_TARGET_CPU_VARIANT_RUNTIME))
+$(call add_json_str, SecondaryDex2oatInstructionSetFeatures, $($(TARGET_2ND_ARCH_VAR_PREFIX)DEX2OAT_TARGET_INSTRUCTION_SET_FEATURES))
+
+$(call add_json_str, BoardPlatform,          $(TARGET_BOARD_PLATFORM))
+$(call add_json_str, BoardShippingApiLevel,  $(BOARD_SHIPPING_API_LEVEL))
+$(call add_json_str, ShippingApiLevel,       $(PRODUCT_SHIPPING_API_LEVEL))
+$(call add_json_str, ShippingVendorApiLevel, $(PRODUCT_SHIPPING_VENDOR_API_LEVEL))
+
+$(call add_json_str, ProductModel,                      $(PRODUCT_MODEL))
+$(call add_json_str, ProductModelForAttestation,        $(PRODUCT_MODEL_FOR_ATTESTATION))
+$(call add_json_str, ProductBrandForAttestation,        $(PRODUCT_BRAND_FOR_ATTESTATION))
+$(call add_json_str, ProductNameForAttestation,         $(PRODUCT_NAME_FOR_ATTESTATION))
+$(call add_json_str, ProductDeviceForAttestation,       $(PRODUCT_DEVICE_FOR_ATTESTATION))
+$(call add_json_str, ProductManufacturerForAttestation, $(PRODUCT_MANUFACTURER_FOR_ATTESTATION))
+
+$(call add_json_str, SystemBrand, $(PRODUCT_SYSTEM_BRAND))
+$(call add_json_str, SystemDevice, $(PRODUCT_SYSTEM_DEVICE))
+$(call add_json_str, SystemManufacturer, $(PRODUCT_SYSTEM_MANUFACTURER))
+$(call add_json_str, SystemModel, $(PRODUCT_SYSTEM_MODEL))
+$(call add_json_str, SystemName, $(PRODUCT_SYSTEM_NAME))
+
+# Collapses ?= and = operators for system property variables. Also removes double quotes to prevent
+# malformed JSON. This change aligns with the existing behavior of sysprop.mk, which passes property
+# variables to the echo command, effectively discarding surrounding double quotes.
+define collapse-prop-pairs
+$(subst ",,$(call collapse-pairs,$(call collapse-pairs,$$($(1)),?=),=))
+endef
+
+$(call add_json_list, PRODUCT_SYSTEM_PROPERTIES,         $(call collapse-prop-pairs,PRODUCT_SYSTEM_PROPERTIES))
+$(call add_json_list, PRODUCT_SYSTEM_DEFAULT_PROPERTIES, $(call collapse-prop-pairs,PRODUCT_SYSTEM_DEFAULT_PROPERTIES))
+$(call add_json_list, PRODUCT_SYSTEM_EXT_PROPERTIES,     $(call collapse-prop-pairs,PRODUCT_SYSTEM_EXT_PROPERTIES))
+$(call add_json_list, PRODUCT_VENDOR_PROPERTIES,         $(call collapse-prop-pairs,PRODUCT_VENDOR_PROPERTIES))
+$(call add_json_list, PRODUCT_PRODUCT_PROPERTIES,        $(call collapse-prop-pairs,PRODUCT_PRODUCT_PROPERTIES))
+$(call add_json_list, PRODUCT_ODM_PROPERTIES,            $(call collapse-prop-pairs,PRODUCT_ODM_PROPERTIES))
+$(call add_json_list, PRODUCT_PROPERTY_OVERRIDES,        $(call collapse-prop-pairs,PRODUCT_PROPERTY_OVERRIDES))
+
+$(call add_json_list, PRODUCT_BUILD_PROP_OVERRIDES,      $(call collapse-prop-pairs,PRODUCT_BUILD_PROP_OVERRIDES))
+
+$(call add_json_str, BootloaderBoardName, $(TARGET_BOOTLOADER_BOARD_NAME))
+
+$(call add_json_bool, SdkBuild, $(filter sdk sdk_addon,$(MAKECMDGOALS)))
+
+$(call add_json_str, SystemServerCompilerFilter, $(PRODUCT_SYSTEM_SERVER_COMPILER_FILTER))
+
+$(call add_json_bool, Product16KDeveloperOption, $(filter true,$(PRODUCT_16K_DEVELOPER_OPTION)))
+
+$(call add_json_str, RecoveryDefaultRotation, $(TARGET_RECOVERY_DEFAULT_ROTATION))
+$(call add_json_str, RecoveryOverscanPercent, $(TARGET_RECOVERY_OVERSCAN_PERCENT))
+$(call add_json_str, RecoveryPixelFormat, $(TARGET_RECOVERY_PIXEL_FORMAT))
+
+ifdef AB_OTA_UPDATER
+$(call add_json_bool, AbOtaUpdater, $(filter true,$(AB_OTA_UPDATER)))
+$(call add_json_str, AbOtaPartitions, $(subst $(space),$(comma),$(sort $(AB_OTA_PARTITIONS))))
+endif
+
+ifdef PRODUCT_USE_DYNAMIC_PARTITIONS
+$(call add_json_bool, UseDynamicPartitions, $(filter true,$(PRODUCT_USE_DYNAMIC_PARTITIONS)))
+endif
+
+ifdef PRODUCT_RETROFIT_DYNAMIC_PARTITIONS
+$(call add_json_bool, RetrofitDynamicPartitions, $(filter true,$(PRODUCT_RETROFIT_DYNAMIC_PARTITIONS)))
+endif
+
+$(call add_json_bool, DontUseVabcOta, $(filter true,$(BOARD_DONT_USE_VABC_OTA)))
+
+$(call add_json_bool, FullTreble, $(filter true,$(PRODUCT_FULL_TREBLE)))
+
+$(call add_json_bool, NoBionicPageSizeMacro, $(filter true,$(PRODUCT_NO_BIONIC_PAGE_SIZE_MACRO)))
+
+$(call add_json_bool, PropertySplitEnabled, $(filter true,$(BOARD_PROPERTY_OVERRIDES_SPLIT_ENABLED)))
+
+$(call add_json_str, ScreenDensity, $(TARGET_SCREEN_DENSITY))
+
+$(call add_json_bool, UsesVulkan, $(filter true,$(TARGET_USES_VULKAN)))
+
+$(call add_json_bool, ZygoteForce64, $(filter true,$(ZYGOTE_FORCE_64)))
+
+$(call add_json_str, VendorSecurityPatch,       $(VENDOR_SECURITY_PATCH))
+$(call add_json_str, VendorImageFileSystemType, $(BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE))
+
+$(call add_json_list, BuildVersionTags, $(BUILD_VERSION_TAGS))
+
+$(call add_json_bool, ProductNotDebuggableInUserdebug, $(PRODUCT_NOT_DEBUGGABLE_IN_USERDEBUG))
+
+$(call add_json_bool, UsesProductImage, $(filter true,$(BOARD_USES_PRODUCTIMAGE)))
+
+$(call add_json_bool, TargetBoots16K, $(filter true,$(TARGET_BOOTS_16K)))
+
+$(call json_end)
+
+$(shell mkdir -p $(dir $(SOONG_EXTRA_VARIABLES)))
+$(file >$(SOONG_EXTRA_VARIABLES).tmp,$(json_contents))
+
+$(shell if ! cmp -s $(SOONG_EXTRA_VARIABLES).tmp $(SOONG_EXTRA_VARIABLES); then \
+	  mv $(SOONG_EXTRA_VARIABLES).tmp $(SOONG_EXTRA_VARIABLES); \
+	else \
+	  rm $(SOONG_EXTRA_VARIABLES).tmp; \
+	fi)

core/sysprop.mk

@@ -29,38 +29,32 @@ POST_PROCESS_PROPS := $(HOST_OUT_EXECUTABLES)/post_process_props$(HOST_EXECUTABL
 # $(1): Partition name
 # $(2): Output file name
 define generate-common-build-props
+    bash -c '\
+    $(or $(PRODUCT_BUILD_PROP_OVERRIDES),:);\
     echo "####################################" >> $(2);\
     echo "# from generate-common-build-props" >> $(2);\
     echo "# These properties identify this partition image." >> $(2);\
     echo "####################################" >> $(2);\
-    $(if $(filter system,$(1)),\
-        echo "ro.product.$(1).brand=$(PRODUCT_SYSTEM_BRAND)" >> $(2);\
-        echo "ro.product.$(1).device=$(PRODUCT_SYSTEM_DEVICE)" >> $(2);\
-        echo "ro.product.$(1).manufacturer=$(PRODUCT_SYSTEM_MANUFACTURER)" >> $(2);\
-        echo "ro.product.$(1).model=$(PRODUCT_SYSTEM_MODEL)" >> $(2);\
-        echo "ro.product.$(1).name=$(PRODUCT_SYSTEM_NAME)" >> $(2);\
-      ,\
-        echo "ro.product.$(1).brand=$(PRODUCT_BRAND)" >> $(2);\
-        echo "ro.product.$(1).device=$(TARGET_DEVICE)" >> $(2);\
-        echo "ro.product.$(1).manufacturer=$(PRODUCT_MANUFACTURER)" >> $(2);\
-        echo "ro.product.$(1).model=$(PRODUCT_MODEL)" >> $(2);\
-        echo "ro.product.$(1).name=$(TARGET_PRODUCT)" >> $(2);\
-        if [ -n "$(strip $(PRODUCT_MODEL_FOR_ATTESTATION))" ]; then \
-            echo "ro.product.model_for_attestation=$(PRODUCT_MODEL_FOR_ATTESTATION)" >> $(2);\
-        fi; \
-        if [ -n "$(strip $(PRODUCT_BRAND_FOR_ATTESTATION))" ]; then \
-            echo "ro.product.brand_for_attestation=$(PRODUCT_BRAND_FOR_ATTESTATION)" >> $(2);\
-        fi; \
-        if [ -n "$(strip $(PRODUCT_NAME_FOR_ATTESTATION))" ]; then \
-            echo "ro.product.name_for_attestation=$(PRODUCT_NAME_FOR_ATTESTATION)" >> $(2);\
-        fi; \
-        if [ -n "$(strip $(PRODUCT_DEVICE_FOR_ATTESTATION))" ]; then \
-            echo "ro.product.device_for_attestation=$(PRODUCT_DEVICE_FOR_ATTESTATION)" >> $(2);\
-        fi; \
-        if [ -n "$(strip $(PRODUCT_MANUFACTURER_FOR_ATTESTATION))" ]; then \
-            echo "ro.product.manufacturer_for_attestation=$(PRODUCT_MANUFACTURER_FOR_ATTESTATION)" >> $(2);\
-        fi; \
-    )\
+    echo "ro.product.$(1).brand=$(PRODUCT_BRAND)" >> $(2);\
+    echo "ro.product.$(1).device=$${DeviceName:-$(TARGET_DEVICE)}" >> $(2);\
+    echo "ro.product.$(1).manufacturer=$(PRODUCT_MANUFACTURER)" >> $(2);\
+    echo "ro.product.$(1).model=$${ProductModel:-$(PRODUCT_MODEL)}" >> $(2);\
+    echo "ro.product.$(1).name=$${DeviceProduct:-$(TARGET_PRODUCT)}" >> $(2);\
+    if [ -n "$(strip $(PRODUCT_MODEL_FOR_ATTESTATION))" ]; then \
+        echo "ro.product.model_for_attestation=$(PRODUCT_MODEL_FOR_ATTESTATION)" >> $(2);\
+    fi; \
+    if [ -n "$(strip $(PRODUCT_BRAND_FOR_ATTESTATION))" ]; then \
+        echo "ro.product.brand_for_attestation=$(PRODUCT_BRAND_FOR_ATTESTATION)" >> $(2);\
+    fi; \
+    if [ -n "$(strip $(PRODUCT_NAME_FOR_ATTESTATION))" ]; then \
+        echo "ro.product.name_for_attestation=$(PRODUCT_NAME_FOR_ATTESTATION)" >> $(2);\
+    fi; \
+    if [ -n "$(strip $(PRODUCT_DEVICE_FOR_ATTESTATION))" ]; then \
+        echo "ro.product.device_for_attestation=$(PRODUCT_DEVICE_FOR_ATTESTATION)" >> $(2);\
+    fi; \
+    if [ -n "$(strip $(PRODUCT_MANUFACTURER_FOR_ATTESTATION))" ]; then \
+        echo "ro.product.manufacturer_for_attestation=$(PRODUCT_MANUFACTURER_FOR_ATTESTATION)" >> $(2);\
+    fi; \
     $(if $(filter true,$(ZYGOTE_FORCE_64)),\
         $(if $(filter vendor,$(1)),\
             echo "ro.$(1).product.cpu.abilist=$(TARGET_CPU_ABI_LIST_64_BIT)" >> $(2);\
@@ -76,10 +70,7 @@ define generate-common-build-props
     )\
     echo "ro.$(1).build.date=`$(DATE_FROM_FILE)`" >> $(2);\
     echo "ro.$(1).build.date.utc=`$(DATE_FROM_FILE) +%s`" >> $(2);\
-    # Allow optional assignments for ARC forward-declarations (b/249168657)
-    # TODO: Remove any tag-related inconsistencies once the goals from
-    # go/arc-android-sigprop-changes have been achieved.
-    echo "ro.$(1).build.fingerprint?=$(BUILD_FINGERPRINT_FROM_FILE)" >> $(2);\
+    echo "ro.$(1).build.fingerprint?=$${BuildFingerprint:-$(BUILD_FINGERPRINT_FROM_FILE)}" >> $(2);\
     echo "ro.$(1).build.id?=$(BUILD_ID)" >> $(2);\
     echo "ro.$(1).build.tags?=$(BUILD_VERSION_TAGS)" >> $(2);\
     echo "ro.$(1).build.type=$(TARGET_BUILD_VARIANT)" >> $(2);\
@@ -87,6 +78,7 @@ define generate-common-build-props
     echo "ro.$(1).build.version.release=$(PLATFORM_VERSION_LAST_STABLE)" >> $(2);\
     echo "ro.$(1).build.version.release_or_codename=$(PLATFORM_VERSION)" >> $(2);\
     echo "ro.$(1).build.version.sdk=$(PLATFORM_SDK_VERSION)" >> $(2);\
+    ';\
 
 endef
 
@@ -226,50 +218,11 @@ KNOWN_OEM_THUMBPRINT_PROPERTIES:=
 # -----------------------------------------------------------------
 # system/build.prop
 #
-# Note: parts of this file that can't be generated by the build-properties
-# macro are manually created as separate files and then fed into the macro
-
-buildinfo_prop := $(call intermediates-dir-for,ETC,buildinfo.prop)/buildinfo.prop
-
-ifdef TARGET_SYSTEM_PROP
-system_prop_file := $(TARGET_SYSTEM_PROP)
-else
-system_prop_file := $(wildcard $(TARGET_DEVICE_DIR)/system.prop)
-endif
-
-_prop_files_ := \
-  $(buildinfo_prop) \
-  $(system_prop_file)
-
-# Order matters here. When there are duplicates, the last one wins.
-# TODO(b/117892318): don't allow duplicates so that the ordering doesn't matter
-_prop_vars_ := \
-    ADDITIONAL_SYSTEM_PROPERTIES \
-    PRODUCT_SYSTEM_PROPERTIES
-
-# TODO(b/117892318): deprecate this
-_prop_vars_ += \
-    PRODUCT_SYSTEM_DEFAULT_PROPERTIES
-
-ifndef property_overrides_split_enabled
-_prop_vars_ += \
-    ADDITIONAL_VENDOR_PROPERTIES \
-    PRODUCT_VENDOR_PROPERTIES
-endif
+# system/build.prop is built by Soong. See system-build.prop module in
+# build/soong/Android.bp.
 
 INSTALLED_BUILD_PROP_TARGET := $(TARGET_OUT)/build.prop
 
-$(eval $(call build-properties,\
-    system,\
-    $(INSTALLED_BUILD_PROP_TARGET),\
-    $(_prop_files_),\
-    $(_prop_vars_),\
-    $(PRODUCT_SYSTEM_PROPERTY_BLACKLIST),\
-    $(empty),\
-    $(empty)))
-
-$(eval $(call declare-1p-target,$(INSTALLED_BUILD_PROP_TARGET)))
-
 # -----------------------------------------------------------------
 # vendor/build.prop
 #
@@ -313,83 +266,18 @@ $(eval $(call declare-1p-target,$(INSTALLED_VENDOR_BUILD_PROP_TARGET)))
 # -----------------------------------------------------------------
 # product/etc/build.prop
 #
-
-_prop_files_ := $(if $(TARGET_PRODUCT_PROP),\
-    $(TARGET_PRODUCT_PROP),\
-    $(wildcard $(TARGET_DEVICE_DIR)/product.prop))
-
-# Order matters here. When there are duplicates, the last one wins.
-# TODO(b/117892318): don't allow duplicates so that the ordering doesn't matter
-_prop_vars_ := \
-    ADDITIONAL_PRODUCT_PROPERTIES \
-    PRODUCT_PRODUCT_PROPERTIES
+# product/etc/build.prop is built by Soong. See product-build.prop module in
+# build/soong/Android.bp.
 
 INSTALLED_PRODUCT_BUILD_PROP_TARGET := $(TARGET_OUT_PRODUCT)/etc/build.prop
 
-ifdef PRODUCT_OEM_PROPERTIES
-import_oem_prop := $(call intermediates-dir-for,ETC,import_oem_prop)/oem.prop
-
-$(import_oem_prop):
-	$(hide) echo "####################################" >> $@; \
-	        echo "# PRODUCT_OEM_PROPERTIES" >> $@; \
-	        echo "####################################" >> $@;
-	$(hide) $(foreach prop,$(PRODUCT_OEM_PROPERTIES), \
-	    echo "import /oem/oem.prop $(prop)" >> $@;)
-
-_footers_ := $(import_oem_prop)
-else
-_footers_ :=
-endif
-
-# Skip common /product properties generation if device released before R and
-# has no product partition. This is the first part of the check.
-ifeq ($(call math_lt,$(if $(PRODUCT_SHIPPING_API_LEVEL),$(PRODUCT_SHIPPING_API_LEVEL),30),30), true)
-  _skip_common_properties := true
-endif
-
-# The second part of the check - always generate common properties for the
-# devices with product partition regardless of shipping level.
-ifneq ($(BOARD_USES_PRODUCTIMAGE),)
-  _skip_common_properties :=
-endif
-
-$(eval $(call build-properties,\
-    product,\
-    $(INSTALLED_PRODUCT_BUILD_PROP_TARGET),\
-    $(_prop_files_),\
-    $(_prop_vars_),\
-    $(empty),\
-    $(_footers_),\
-    $(_skip_common_properties)))
-
-$(eval $(call declare-1p-target,$(INSTALLED_PRODUCT_BUILD_PROP_TARGET)))
-
-_skip_common_properties :=
-
 # ----------------------------------------------------------------
 # odm/etc/build.prop
 #
-_prop_files_ := $(if $(TARGET_ODM_PROP),\
-    $(TARGET_ODM_PROP),\
-    $(wildcard $(TARGET_DEVICE_DIR)/odm.prop))
-
-# Order matters here. When there are duplicates, the last one wins.
-# TODO(b/117892318): don't allow duplicates so that the ordering doesn't matter
-_prop_vars_ := \
-    ADDITIONAL_ODM_PROPERTIES \
-    PRODUCT_ODM_PROPERTIES
+# odm/etc/build.prop is built by Soong. See odm-build.prop module in
+# build/soong/Android.bp.
 
 INSTALLED_ODM_BUILD_PROP_TARGET := $(TARGET_OUT_ODM)/etc/build.prop
-$(eval $(call build-properties,\
-    odm,\
-    $(INSTALLED_ODM_BUILD_PROP_TARGET),\
-    $(_prop_files_),\
-    $(_prop_vars_),\
-    $(empty),\
-    $(empty),\
-    $(empty)))
-
-$(eval $(call declare-1p-target,$(INSTALLED_ODM_BUILD_PROP_TARGET)))
 
 # ----------------------------------------------------------------
 # vendor_dlkm/etc/build.prop
@@ -442,25 +330,10 @@ $(eval $(call declare-1p-target,$(INSTALLED_SYSTEM_DLKM_BUILD_PROP_TARGET)))
 # -----------------------------------------------------------------
 # system_ext/etc/build.prop
 #
-_prop_files_ := $(if $(TARGET_SYSTEM_EXT_PROP),\
-    $(TARGET_SYSTEM_EXT_PROP),\
-    $(wildcard $(TARGET_DEVICE_DIR)/system_ext.prop))
-
-# Order matters here. When there are duplicates, the last one wins.
-# TODO(b/117892318): don't allow duplicates so that the ordering doesn't matter
-_prop_vars_ := PRODUCT_SYSTEM_EXT_PROPERTIES
+# system_ext/etc/build.prop is built by Soong. See system-build.prop module in
+# build/soong/Android.bp.
 
 INSTALLED_SYSTEM_EXT_BUILD_PROP_TARGET := $(TARGET_OUT_SYSTEM_EXT)/etc/build.prop
-$(eval $(call build-properties,\
-    system_ext,\
-    $(INSTALLED_SYSTEM_EXT_BUILD_PROP_TARGET),\
-    $(_prop_files_),\
-    $(_prop_vars_),\
-    $(empty),\
-    $(empty),\
-    $(empty)))
-
-$(eval $(call declare-1p-target,$(INSTALLED_SYSTEM_EXT_BUILD_PROP_TARGET)))
 
 # ----------------------------------------------------------------
 # ramdisk/boot/etc/build.prop

core/sysprop_config.mk

@@ -15,57 +15,9 @@ $(foreach name, $(_additional_prop_var_names),\
 )
 _additional_prop_var_names :=
 
-#
-# -----------------------------------------------------------------
-# Add the product-defined properties to the build properties.
-ifneq ($(BOARD_PROPERTY_OVERRIDES_SPLIT_ENABLED), true)
-  ADDITIONAL_SYSTEM_PROPERTIES += $(PRODUCT_PROPERTY_OVERRIDES)
-else
-  ifndef BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE
-    ADDITIONAL_SYSTEM_PROPERTIES += $(PRODUCT_PROPERTY_OVERRIDES)
-  endif
-endif
-
-ADDITIONAL_SYSTEM_PROPERTIES += ro.treble.enabled=${PRODUCT_FULL_TREBLE}
-
-# Set ro.llndk.api_level to show the maximum vendor API level that the LLNDK in
-# the system partition supports.
-ifdef RELEASE_BOARD_API_LEVEL
-ADDITIONAL_SYSTEM_PROPERTIES += ro.llndk.api_level=$(RELEASE_BOARD_API_LEVEL)
-endif
-
-# Sets ro.actionable_compatible_property.enabled to know on runtime whether the
-# allowed list of actionable compatible properties is enabled or not.
-ADDITIONAL_SYSTEM_PROPERTIES += ro.actionable_compatible_property.enabled=true
-
-# Add the system server compiler filter if they are specified for the product.
-ifneq (,$(PRODUCT_SYSTEM_SERVER_COMPILER_FILTER))
-ADDITIONAL_PRODUCT_PROPERTIES += dalvik.vm.systemservercompilerfilter=$(PRODUCT_SYSTEM_SERVER_COMPILER_FILTER)
-endif
-
-# Add the 16K developer option if it is defined for the product.
-ifeq ($(PRODUCT_16K_DEVELOPER_OPTION),true)
-ADDITIONAL_PRODUCT_PROPERTIES += ro.product.build.16k_page.enabled=true
-else
-ADDITIONAL_PRODUCT_PROPERTIES += ro.product.build.16k_page.enabled=false
-endif
-
-# Enable core platform API violation warnings on userdebug and eng builds.
-ifneq ($(TARGET_BUILD_VARIANT),user)
-ADDITIONAL_SYSTEM_PROPERTIES += persist.debug.dalvik.vm.core_platform_api_policy=just-warn
-endif
-
-# Define ro.sanitize.<name> properties for all global sanitizers.
-ADDITIONAL_SYSTEM_PROPERTIES += $(foreach s,$(SANITIZE_TARGET),ro.sanitize.$(s)=true)
-
-# Sets the default value of ro.postinstall.fstab.prefix to /system.
-# Device board config should override the value to /product when needed by:
-#
-#     PRODUCT_PRODUCT_PROPERTIES += ro.postinstall.fstab.prefix=/product
-#
-# It then uses ${ro.postinstall.fstab.prefix}/etc/fstab.postinstall to
-# mount system_other partition.
-ADDITIONAL_SYSTEM_PROPERTIES += ro.postinstall.fstab.prefix=/system
+$(KATI_obsolete_var ADDITIONAL_SYSTEM_PROPERTIES,Use build/soong/scripts/gen_build_prop.py instead)
+$(KATI_obsolete_var ADDITIONAL_ODM_PROPERTIES,Use build/soong/scripts/gen_build_prop.py instead)
+$(KATI_obsolete_var ADDITIONAL_PRODUCT_PROPERTIES,Use build/soong/scripts/gen_build_prop.py instead)
 
 # Add cpu properties for bionic and ART.
 ADDITIONAL_VENDOR_PROPERTIES += ro.bionic.arch=$(TARGET_ARCH)
@@ -178,118 +130,16 @@ ADDITIONAL_VENDOR_PROPERTIES += \
     ro.build.ab_update=$(AB_OTA_UPDATER)
 endif
 
-ADDITIONAL_PRODUCT_PROPERTIES += ro.build.characteristics=$(TARGET_AAPT_CHARACTERISTICS)
-
 ifeq ($(AB_OTA_UPDATER),true)
-ADDITIONAL_PRODUCT_PROPERTIES += ro.product.ab_ota_partitions=$(subst $(space),$(comma),$(sort $(AB_OTA_PARTITIONS)))
 ADDITIONAL_VENDOR_PROPERTIES += ro.vendor.build.ab_ota_partitions=$(subst $(space),$(comma),$(sort $(AB_OTA_PARTITIONS)))
 endif
 
-# Set this property for VTS to skip large page size tests on unsupported devices.
-ADDITIONAL_PRODUCT_PROPERTIES += \
-    ro.product.cpu.pagesize.max=$(TARGET_MAX_PAGE_SIZE_SUPPORTED)
-
-ifeq ($(PRODUCT_NO_BIONIC_PAGE_SIZE_MACRO),true)
-ADDITIONAL_PRODUCT_PROPERTIES += ro.product.build.no_bionic_page_size_macro=true
-endif
-
 user_variant := $(filter user userdebug,$(TARGET_BUILD_VARIANT))
-enable_target_debugging := true
-enable_dalvik_lock_contention_logging := true
-ifneq (,$(user_variant))
-  # Target is secure in user builds.
-  ADDITIONAL_SYSTEM_PROPERTIES += ro.secure=1
-  ADDITIONAL_SYSTEM_PROPERTIES += security.perf_harden=1
-
-  ifeq ($(user_variant),user)
-    ADDITIONAL_SYSTEM_PROPERTIES += ro.adb.secure=1
-  endif
-
-  ifneq ($(user_variant),userdebug)
-    # Disable debugging in plain user builds.
-    enable_target_debugging :=
-    enable_dalvik_lock_contention_logging :=
-  else
-    # Disable debugging in userdebug builds if PRODUCT_NOT_DEBUGGABLE_IN_USERDEBUG
-    # is set.
-    ifneq (,$(strip $(PRODUCT_NOT_DEBUGGABLE_IN_USERDEBUG)))
-      enable_target_debugging :=
-    endif
-  endif
-
-  # Disallow mock locations by default for user builds
-  ADDITIONAL_SYSTEM_PROPERTIES += ro.allow.mock.location=0
-
-else # !user_variant
-  # Turn on checkjni for non-user builds.
-  ADDITIONAL_SYSTEM_PROPERTIES += ro.kernel.android.checkjni=1
-  # Set device insecure for non-user builds.
-  ADDITIONAL_SYSTEM_PROPERTIES += ro.secure=0
-  # Allow mock locations by default for non user builds
-  ADDITIONAL_SYSTEM_PROPERTIES += ro.allow.mock.location=1
-endif # !user_variant
-
-ifeq (true,$(strip $(enable_dalvik_lock_contention_logging)))
-  # Enable Dalvik lock contention logging.
-  ADDITIONAL_SYSTEM_PROPERTIES += dalvik.vm.lockprof.threshold=500
-endif # !enable_dalvik_lock_contention_logging
-
-ifeq (true,$(strip $(enable_target_debugging)))
-  # Target is more debuggable and adbd is on by default
-  ADDITIONAL_SYSTEM_PROPERTIES += ro.debuggable=1
-else # !enable_target_debugging
-  # Target is less debuggable and adbd is off by default
-  ADDITIONAL_SYSTEM_PROPERTIES += ro.debuggable=0
-endif # !enable_target_debugging
-
-enable_target_debugging:=
-enable_dalvik_lock_contention_logging:=
-
-ifneq ($(filter sdk sdk_addon,$(MAKECMDGOALS)),)
-_is_sdk_build := true
-endif
-
-ifeq ($(TARGET_BUILD_VARIANT),eng)
-ifneq ($(filter ro.setupwizard.mode=ENABLED, $(call collapse-pairs, $(ADDITIONAL_SYSTEM_PROPERTIES))),)
-  # Don't require the setup wizard on eng builds
-  ADDITIONAL_SYSTEM_PROPERTIES := $(filter-out ro.setupwizard.mode=%,\
-          $(call collapse-pairs, $(ADDITIONAL_SYSTEM_PROPERTIES))) \
-          ro.setupwizard.mode=OPTIONAL
-endif
-ifndef _is_sdk_build
-  # To speedup startup of non-preopted builds, don't verify or compile the boot image.
-  ADDITIONAL_SYSTEM_PROPERTIES += dalvik.vm.image-dex2oat-filter=extract
-endif
-# b/323566535
-ADDITIONAL_SYSTEM_PROPERTIES += init.svc_debug.no_fatal.zygote=true
-endif
-
-ifdef _is_sdk_build
-ADDITIONAL_SYSTEM_PROPERTIES += xmpp.auto-presence=true
-ADDITIONAL_SYSTEM_PROPERTIES += ro.config.nocheckin=yes
-endif
-
-_is_sdk_build :=
-
-ADDITIONAL_SYSTEM_PROPERTIES += net.bt.name=Android
-
-# This property is set by flashing debug boot image, so default to false.
-ADDITIONAL_SYSTEM_PROPERTIES += ro.force.debuggable=0
 
 config_enable_uffd_gc := \
   $(firstword $(OVERRIDE_ENABLE_UFFD_GC) $(PRODUCT_ENABLE_UFFD_GC) default)
 
-# This is a temporary system property that controls the ART module. The plan is
-# to remove it by Aug 2025, at which time Mainline updates of the ART module
-# will ignore it as well.
-# If the value is "default", it will be mangled by post_process_props.py.
-ADDITIONAL_PRODUCT_PROPERTIES += ro.dalvik.vm.enable_uffd_gc=$(config_enable_uffd_gc)
-
-ADDITIONAL_SYSTEM_PROPERTIES := $(strip $(ADDITIONAL_SYSTEM_PROPERTIES))
-ADDITIONAL_PRODUCT_PROPERTIES := $(strip $(ADDITIONAL_PRODUCT_PROPERTIES))
 ADDITIONAL_VENDOR_PROPERTIES := $(strip $(ADDITIONAL_VENDOR_PROPERTIES))
 
 .KATI_READONLY += \
-    ADDITIONAL_SYSTEM_PROPERTIES \
-    ADDITIONAL_PRODUCT_PROPERTIES \
     ADDITIONAL_VENDOR_PROPERTIES

envsetup.sh

@@ -53,8 +53,8 @@ function build_build_var_cache()
 {
     local T=$(gettop)
     # Grep out the variable names from the script.
-    cached_vars=(`cat $T/build/envsetup.sh | tr '()' '  ' | awk '{for(i=1;i<=NF;i++) if($i~/_get_build_var_cached/) print $(i+1)}' | sort -u | tr '\n' ' '`)
-    cached_abs_vars=(`cat $T/build/envsetup.sh | tr '()' '  ' | awk '{for(i=1;i<=NF;i++) if($i~/_get_abs_build_var_cached/) print $(i+1)}' | sort -u | tr '\n' ' '`)
+    cached_vars=(`cat $T/build/envsetup.sh $T/vendor/tequila/build/envsetup.sh | tr '()' '  ' | awk '{for(i=1;i<=NF;i++) if($i~/_get_build_var_cached/) print $(i+1)}' | sort -u | tr '\n' ' '`)
+    cached_abs_vars=(`cat $T/build/envsetup.sh $T/vendor/tequila/build/envsetup.sh | tr '()' '  ' | awk '{for(i=1;i<=NF;i++) if($i~/_get_abs_build_var_cached/) print $(i+1)}' | sort -u | tr '\n' ' '`)
     # Call the build system to dump the "<val>=<value>" pairs as a shell script.
     build_dicts_script=`\builtin cd $T; build/soong/soong_ui.bash --dumpvars-mode \
                         --vars="${cached_vars[*]}" \
@@ -324,8 +324,6 @@ function set_stuff_for_environment()
 {
     set_lunch_paths
     set_sequence_number
-
-    export ANDROID_BUILD_TOP=$(gettop)
 }
 
 function set_sequence_number()
@@ -524,12 +522,21 @@ function _lunch_meat()
     # Note this is the string "release", not the value of the variable.
     export TARGET_BUILD_TYPE=release
 
+    local no_kernel=$(_get_build_var_cached TARGET_NO_KERNEL)
+    if [[ "$no_kernel" == "true" ]]; then
+        unset INLINE_KERNEL_BUILDING
+    else
+        export INLINE_KERNEL_BUILDING=true
+    fi
+
     [[ -n "${ANDROID_QUIET_BUILD:-}" ]] || echo
 
+    fixup_common_out_dir
+
     set_stuff_for_environment
     [[ -n "${ANDROID_QUIET_BUILD:-}" ]] || printconfig
 
-    if [[ -z "${ANDROID_QUIET_BUILD}" ]]; then
+    if [[ -z "${ANDROID_QUIET_BUILD}" && -z "${TEQUILA_BUILD}" ]]; then
         local spam_for_lunch=$(gettop)/build/make/tools/envsetup/spam_for_lunch
         if [[ -x $spam_for_lunch ]]; then
             $spam_for_lunch
@@ -1178,4 +1185,6 @@ set_global_paths
 source_vendorsetup
 addcompletions
 
+export ANDROID_BUILD_TOP=$(gettop)
 
+. $ANDROID_BUILD_TOP/vendor/tequila/build/envsetup.sh

shell_utils.sh

@@ -114,11 +114,11 @@ function _wrap_build()
         echo -n "${color_failed}#### failed to build some targets "
     fi
     if [ $hours -gt 0 ] ; then
-        printf "(%02g:%02g:%02g (hh:mm:ss))" $hours $mins $secs
+        printf "(%02d:%02d:%02d (hh:mm:ss))" $hours $mins $secs
     elif [ $mins -gt 0 ] ; then
-        printf "(%02g:%02g (mm:ss))" $mins $secs
+        printf "(%02d:%02d (mm:ss))" $mins $secs
     elif [ $secs -gt 0 ] ; then
-        printf "(%s seconds)" $secs
+        printf "(%d seconds)" $secs
     fi
     echo " ####${color_reset}"
     echo

target/board/BoardConfigMainlineCommon.mk

@@ -9,8 +9,6 @@ include build/make/target/product/build_variables.mk
 TARGET_NO_BOOTLOADER := true
 TARGET_NO_RECOVERY := true
 
-BOARD_EXT4_SHARE_DUP_BLOCKS := true
-
 TARGET_USERIMAGES_USE_EXT4 := true
 
 # Mainline devices must have /system_ext, /vendor and /product partitions.

target/product/aosp_product.mk

@@ -19,7 +19,9 @@ $(call inherit-product, $(SRC_TARGET_DIR)/product/handheld_product.mk)
 $(call inherit-product, $(SRC_TARGET_DIR)/product/telephony_product.mk)
 
 # Default AOSP sounds
+ifeq ($(TEQUILA_BUILD),)
 $(call inherit-product-if-exists, frameworks/base/data/sounds/AllAudio.mk)
+endif
 
 # Additional settings used in all AOSP builds
 PRODUCT_PRODUCT_PROPERTIES += \
@@ -37,5 +39,7 @@ PRODUCT_PACKAGES += \
 
 # Telephony:
 #   Provide a APN configuration to GSI product
+ifeq ($(TEQUILA_BUILD),)
 PRODUCT_COPY_FILES += \
     device/sample/etc/apns-full-conf.xml:$(TARGET_COPY_OUT_PRODUCT)/etc/apns-conf.xml
+endif

target/product/base_product.mk

@@ -25,3 +25,4 @@ PRODUCT_PACKAGES += \
     product_compatibility_matrix.xml \
     product_manifest.xml \
     selinux_policy_product \
+    product-build.prop \

target/product/base_system.mk

@@ -279,6 +279,7 @@ PRODUCT_PACKAGES += \
     storaged \
     surfaceflinger \
     svc \
+    system-build.prop \
     task_profiles.json \
     tc \
     telecom \
@@ -471,7 +472,6 @@ PRODUCT_PACKAGES_DEBUG := \
     ss \
     start_with_lockagent \
     strace \
-    su \
     sanitizer-status \
     tracepath \
     tracepath6 \
@@ -480,6 +480,11 @@ PRODUCT_PACKAGES_DEBUG := \
     unwind_reg_info \
     unwind_symbols \
 
+ifeq ($(TEQUILA_BUILD),)
+PRODUCT_PACKAGES_DEBUG += \
+    su
+endif
+
 # The set of packages whose code can be loaded by the system server.
 PRODUCT_SYSTEM_SERVER_APPS += \
     SettingsProvider \

target/product/base_system_ext.mk

@@ -24,6 +24,7 @@ PRODUCT_PACKAGES += \
     SatelliteClient \
     selinux_policy_system_ext \
     system_ext_manifest.xml \
+    system_ext-build.prop \
 
 # Base modules when shipping api level is less than or equal to 34
 PRODUCT_PACKAGES_SHIPPING_API_LEVEL_34 += \

target/product/base_vendor.mk

@@ -17,7 +17,6 @@
 # Base modules and settings for recovery.
 PRODUCT_PACKAGES += \
     adbd.recovery \
-    android.hardware.health@2.0-impl-default.recovery \
     build_flag_vendor \
     cgroups.recovery.json \
     charger.recovery \
@@ -73,6 +72,7 @@ PRODUCT_PACKAGES += \
     passwd_vendor \
     selinux_policy_nonsystem \
     shell_and_utilities_vendor \
+    odm-build.prop \
 
 # Base modules when shipping api level is less than or equal to 34
 PRODUCT_PACKAGES_SHIPPING_API_LEVEL_34 += \

target/product/default_art_config.mk

@@ -183,5 +183,3 @@ PRODUCT_SYSTEM_PROPERTIES += \
     dalvik.vm.image-dex2oat-Xmx=64m \
     dalvik.vm.dex2oat-Xms=64m \
     dalvik.vm.dex2oat-Xmx=512m \
-
-PRODUCT_ENABLE_UFFD_GC := default

target/product/full_base.mk

@@ -45,7 +45,9 @@ PRODUCT_VENDOR_PROPERTIES := \
 PRODUCT_LOCALES := en_US
 
 # Get some sounds
+ifeq ($(TEQUILA_BUILD),)
 $(call inherit-product-if-exists, frameworks/base/data/sounds/AllAudio.mk)
+endif
 
 # Get a list of languages.
 $(call inherit-product, $(SRC_TARGET_DIR)/product/languages_full.mk)

target/product/full_base_telephony.mk

@@ -24,8 +24,12 @@ PRODUCT_VENDOR_PROPERTIES := \
     ro.com.android.dataroaming?=true
 
 PRODUCT_COPY_FILES := \
-    device/sample/etc/apns-full-conf.xml:system/etc/apns-conf.xml \
     frameworks/native/data/etc/handheld_core_hardware.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/handheld_core_hardware.xml
 
+ifeq ($(TEQUILA_BUILD),)
+PRODUCT_COPY_FILES += \
+    device/sample/etc/apns-full-conf.xml:system/etc/apns-conf.xml
+endif
+
 $(call inherit-product, $(SRC_TARGET_DIR)/product/aosp_base.mk)
 $(call inherit-product, $(SRC_TARGET_DIR)/product/telephony.mk)

target/product/handheld_product.mk

@@ -28,12 +28,16 @@ PRODUCT_PACKAGES += \
     Contacts \
     DeskClock \
     Gallery2 \
-    LatinIME \
     Music \
     preinstalled-packages-platform-handheld-product.xml \
     QuickSearchBox \
     SettingsIntelligence \
     frameworks-base-overlays
 
+ifeq ($(TEQUILA_BUILD),)
+PRODUCT_PACKAGES += \
+    LatinIME
+endif
+
 PRODUCT_PACKAGES_DEBUG += \
     frameworks-base-overlays-debug

target/product/handheld_system.mk

@@ -45,7 +45,6 @@ PRODUCT_PACKAGES += \
     CertInstaller \
     CredentialManager \
     DeviceAsWebcam \
-    DeviceDiagnostics \
     DocumentsUI \
     DownloadProviderUi \
     EasterEgg \
@@ -70,7 +69,6 @@ PRODUCT_PACKAGES += \
     Telecom \
     TelephonyProvider \
     TeleService \
-    Traceur \
     UserDictionaryProvider \
     VpnDialogs \
     vr \
@@ -96,3 +94,7 @@ PRODUCT_VENDOR_PROPERTIES += \
     ro.carrier?=unknown \
     ro.config.notification_sound?=OnTheHunt.ogg \
     ro.config.alarm_alert?=Alarm_Classic.ogg
+
+# Traceur for debug only
+PRODUCT_PACKAGES_ENG += \
+    Traceur

tools/aconfig/aconfig_device_paths/src/lib.rs

@@ -30,9 +30,11 @@ fn read_partition_paths() -> Vec<PathBuf> {
         .collect()
 }
 
-/// Determine all paths that contain an aconfig protobuf file.
+/// Determines all paths that contain an aconfig protobuf file,
+/// filtering out nonexistent partition protobuf files.
 pub fn parsed_flags_proto_paths() -> Result<Vec<PathBuf>> {
-    let mut result: Vec<PathBuf> = read_partition_paths();
+    let mut result: Vec<PathBuf> =
+        read_partition_paths().into_iter().filter(|s| s.exists()).collect();
 
     for dir in fs::read_dir("/apex")? {
         let dir = dir?;

tools/releasetools/add_img_to_target_files.py

@@ -787,9 +787,16 @@ def AddSuperEmpty(output_zip):
   img = OutputFile(output_zip, OPTIONS.input_tmp, "IMAGES", "super_empty.img")
   if os.path.exists(img.name):
     logger.info("super_empty.img already exists; no need to rebuild...")
-    return
-  build_super_image.BuildSuperImage(OPTIONS.info_dict, img.name)
-  img.Write()
+  else:
+    build_super_image.BuildSuperImage(OPTIONS.info_dict, img.name)
+    img.Write()
+
+  unsparse_img = OutputFile(output_zip, OPTIONS.input_tmp, "IMAGES", "unsparse_super_empty.img")
+  if os.path.exists(unsparse_img.name):
+    logger.info("unsparse_super_empty.img already exists; no need to rebuild...")
+  else:
+    build_super_image.BuildSuperImage(OPTIONS.info_dict, unsparse_img.name, force_non_sparse=True)
+    unsparse_img.Write()
 
 
 def AddSuperSplit(output_zip):

tools/releasetools/build_image.py

@@ -312,7 +312,7 @@ def BuildImageMkfs(in_dir, prop_dict, out_file, target_out, fs_config):
       base_fs_file = ConvertBlockMapToBaseFs(prop_dict["base_fs_file"])
       build_command.extend(["-d", base_fs_file])
     build_command.extend(["-L", prop_dict["mount_point"]])
-    if "extfs_inode_count" in prop_dict:
+    if "extfs_inode_count" in prop_dict and int(prop_dict["extfs_inode_count"]) >= 0:
       build_command.extend(["-i", prop_dict["extfs_inode_count"]])
     if "extfs_rsv_pct" in prop_dict:
       build_command.extend(["-M", prop_dict["extfs_rsv_pct"]])
@@ -606,19 +606,20 @@ def BuildImage(in_dir, prop_dict, out_file, target_out=None):
           size = common.RoundUpTo4K(size)
         else:
           size = ((size + block_size - 1) // block_size) * block_size
-      extfs_inode_count = prop_dict["extfs_inode_count"]
-      inodes = int(fs_dict.get("Inode count", extfs_inode_count))
-      inodes -= int(fs_dict.get("Free inodes", "0"))
-      # add .2% margin or 1 inode, whichever is greater
-      spare_inodes = inodes * 2 // 1000
-      min_spare_inodes = 1
-      if spare_inodes < min_spare_inodes:
-        spare_inodes = min_spare_inodes
-      inodes += spare_inodes
-      prop_dict["extfs_inode_count"] = str(inodes)
+      if int(prop_dict["extfs_inode_count"]) >= 0:
+        extfs_inode_count = prop_dict["extfs_inode_count"]
+        inodes = int(fs_dict.get("Inode count", extfs_inode_count))
+        inodes -= int(fs_dict.get("Free inodes", "0"))
+        # add .2% margin or 1 inode, whichever is greater
+        spare_inodes = inodes * 2 // 1000
+        min_spare_inodes = 1
+        if spare_inodes < min_spare_inodes:
+          spare_inodes = min_spare_inodes
+        inodes += spare_inodes
+        prop_dict["extfs_inode_count"] = str(inodes)
+        logger.info(
+            "Allocating %d Inodes for %s.", inodes, out_file)
       prop_dict["partition_size"] = str(size)
-      logger.info(
-          "Allocating %d Inodes for %s.", inodes, out_file)
     elif fs_type.startswith("f2fs") and prop_dict.get("f2fs_compress") == "true":
       prop_dict["partition_size"] = str(size)
       prop_dict["image_size"] = str(size)

tools/releasetools/build_super_image.py

@@ -62,14 +62,14 @@ def GetArgumentsForImage(partition, group, image=None):
   image_size = sparse_img.GetImagePartitionSize(image) if image else 0
 
   cmd = ["--partition",
-         "{}:readonly:{}:{}".format(partition, image_size, group)]
+         "{}:none:{}:{}".format(partition, image_size, group)]
   if image:
     cmd += ["--image", "{}={}".format(partition, image)]
 
   return cmd
 
 
-def BuildSuperImageFromDict(info_dict, output):
+def BuildSuperImageFromDict(info_dict, output, force_non_sparse=False):
 
   cmd = [info_dict["lpmake"],
          "--metadata-size", "65536",
@@ -133,7 +133,7 @@ def BuildSuperImageFromDict(info_dict, output):
 
       cmd += GetArgumentsForImage(partition + "_b", group + "_b", other_image)
 
-  if info_dict.get("build_non_sparse_super_partition") != "true":
+  if info_dict.get("build_non_sparse_super_partition") != "true" and not force_non_sparse:
     cmd.append("--sparse")
 
   cmd += ["--output", output]
@@ -178,11 +178,11 @@ def BuildSuperImageFromTargetFiles(inp, out):
   return BuildSuperImageFromExtractedTargetFiles(input_tmp, out)
 
 
-def BuildSuperImage(inp, out):
+def BuildSuperImage(inp, out, force_non_sparse=False):
 
   if isinstance(inp, dict):
     logger.info("Building super image from info dict...")
-    return BuildSuperImageFromDict(inp, out)
+    return BuildSuperImageFromDict(inp, out, force_non_sparse=False)
 
   if isinstance(inp, str):
     if os.path.isdir(inp):

tools/releasetools/common.py

@@ -445,7 +445,7 @@ class BuildInfo(object):
           "system_other"] = self._partition_fingerprints["system"]
 
     # These two should be computed only after setting self._oem_props.
-    self._device = self.GetOemProperty("ro.product.device")
+    self._device = info_dict.get("ota_override_device", self.GetOemProperty("ro.product.device"))
     self._fingerprint = self.CalculateFingerprint()
     check_fingerprint(self._fingerprint)
 
@@ -675,7 +675,7 @@ class BuildInfo(object):
     return self.GetBuildProp(key)
 
   def GetPartitionFingerprint(self, partition):
-    return self._partition_fingerprints.get(partition, None)
+    return self._partition_fingerprints.get(partition, self.CalculateFingerprint())
 
   def CalculatePartitionFingerprint(self, partition):
     try:
@@ -832,11 +832,14 @@ def ExtractFromInputFile(input_file, fn):
 class RamdiskFormat(object):
   LZ4 = 1
   GZ = 2
+  XZ = 3
 
 
 def GetRamdiskFormat(info_dict):
   if info_dict.get('lz4_ramdisks') == 'true':
     ramdisk_format = RamdiskFormat.LZ4
+  elif info_dict.get('xz_ramdisks') == 'true':
+    ramdisk_format = RamdiskFormat.XZ
   else:
     ramdisk_format = RamdiskFormat.GZ
   return ramdisk_format
@@ -942,7 +945,11 @@ def LoadInfoDict(input_file, repacking=False):
     makeint(b.replace(".img", "_size"))
 
   # Load recovery fstab if applicable.
-  d["fstab"] = _FindAndLoadRecoveryFstab(d, input_file, read_helper)
+  if isinstance(input_file, str) and zipfile.is_zipfile(input_file):
+    with zipfile.ZipFile(input_file, 'r', allowZip64=True) as input_zip:
+      d["fstab"] = _FindAndLoadRecoveryFstab(d, input_zip, read_helper)
+  else:
+    d["fstab"] = _FindAndLoadRecoveryFstab(d, input_file, read_helper)
   ramdisk_format = GetRamdiskFormat(d)
 
   # Tries to load the build props for all partitions with care_map, including
@@ -1221,9 +1228,10 @@ def LoadRecoveryFSTab(read_helper, fstab_version, recovery_fstab_path):
         context = i
 
     mount_point = pieces[1]
-    d[mount_point] = Partition(mount_point=mount_point, fs_type=pieces[2],
-                               device=pieces[0], length=length, context=context,
-                               slotselect=slotselect)
+    if not d.get(mount_point):
+        d[mount_point] = Partition(mount_point=mount_point, fs_type=pieces[2],
+                                   device=pieces[0], length=length, context=context,
+                                   slotselect=slotselect)
 
   return d
 
@@ -1673,10 +1681,13 @@ def _MakeRamdisk(sourcedir, fs_config_file=None,
   if ramdisk_format == RamdiskFormat.LZ4:
     p2 = Run(["lz4", "-l", "-12", "--favor-decSpeed"], stdin=p1.stdout,
              stdout=ramdisk_img.file.fileno())
+  elif ramdisk_format == RamdiskFormat.XZ:
+    p2 = Run(["xz", "-f", "-c", "--check=crc32", "--lzma2=dict=32MiB"], stdin=p1.stdout,
+             stdout=ramdisk_img.file.fileno())
   elif ramdisk_format == RamdiskFormat.GZ:
     p2 = Run(["gzip"], stdin=p1.stdout, stdout=ramdisk_img.file.fileno())
   else:
-    raise ValueError("Only support lz4 or gzip ramdisk format.")
+    raise ValueError("Only support lz4, xz or gzip ramdisk format.")
 
   p2.wait()
   p1.wait()
@@ -1764,6 +1775,11 @@ def _BuildBootableImage(image_name, sourcedir, fs_config_file,
     cmd.append("--pagesize")
     cmd.append(open(fn).read().rstrip("\n"))
 
+  fn = os.path.join(sourcedir, "dt")
+  if os.access(fn, os.F_OK):
+    cmd.append("--dt")
+    cmd.append(fn)
+
   if partition_name == "recovery":
     args = info_dict.get("recovery_mkbootimg_args")
     if not args:
@@ -2861,6 +2877,7 @@ class PasswordManager(object):
   def __init__(self):
     self.editor = os.getenv("EDITOR")
     self.pwfile = os.getenv("ANDROID_PW_FILE")
+    self.secure_storage_cmd = os.getenv("ANDROID_SECURE_STORAGE_CMD", None)
 
   def GetPasswords(self, items):
     """Get passwords corresponding to each string in 'items',
@@ -2880,7 +2897,19 @@ class PasswordManager(object):
       missing = []
       for i in items:
         if i not in current or not current[i]:
-          missing.append(i)
+          # Attempt to load using ANDROID_SECURE_STORAGE_CMD
+          if self.secure_storage_cmd:
+            try:
+              os.environ["TMP__KEY_FILE_NAME"] = str(i)
+              ps = subprocess.Popen(self.secure_storage_cmd, shell=True, stdout=subprocess.PIPE)
+              output = ps.communicate()[0]
+              if ps.returncode == 0:
+                current[i] = output.decode('utf-8')
+            except Exception as e:
+              print(e)
+              pass
+          if i not in current or not current[i]:
+            missing.append(i)
       # Are all the passwords already in the file?
       if not missing:
         return current
@@ -3171,6 +3200,11 @@ class DeviceSpecificParams(object):
     used to install the image for the device's baseband processor."""
     return self._DoCall("FullOTA_InstallEnd")
 
+  def FullOTA_PostValidate(self):
+    """Called after installing and validating /system; typically this is
+    used to resize the system partition after a block based installation."""
+    return self._DoCall("FullOTA_PostValidate")
+
   def IncrementalOTA_Assertions(self):
     """Called after emitting the block of assertions at the top of an
     incremental OTA package.  Implementations can add whatever
@@ -3785,40 +3819,19 @@ def MakeRecoveryPatch(input_dir, output_sink, recovery_img, boot_img,
 
   full_recovery_image = info_dict.get("full_recovery_image") == "true"
   board_uses_vendorimage = info_dict.get("board_uses_vendorimage") == "true"
+  board_builds_vendorimage =  info_dict.get("board_builds_vendorimage") == "true"
 
-  if board_uses_vendorimage:
-    # In this case, the output sink is rooted at VENDOR
+  if board_builds_vendorimage or not board_uses_vendorimage:
     recovery_img_path = "etc/recovery.img"
-    recovery_resource_dat_path = "VENDOR/etc/recovery-resource.dat"
-    sh_dir = "bin"
   else:
-    # In this case the output sink is rooted at SYSTEM
-    recovery_img_path = "vendor/etc/recovery.img"
-    recovery_resource_dat_path = "SYSTEM/vendor/etc/recovery-resource.dat"
-    sh_dir = "vendor/bin"
+    logger.warning('Recovery patch generation is disable when prebuilt vendor image is used.')
+    return None
 
   if full_recovery_image:
     output_sink(recovery_img_path, recovery_img.data)
 
   else:
-    include_recovery_dtbo = info_dict.get("include_recovery_dtbo") == "true"
-    include_recovery_acpio = info_dict.get("include_recovery_acpio") == "true"
-    path = os.path.join(input_dir, recovery_resource_dat_path)
-    # Use bsdiff to handle mismatching entries (Bug: 72731506)
-    if include_recovery_dtbo or include_recovery_acpio:
-      diff_program = ["bsdiff"]
-      bonus_args = ""
-      assert not os.path.exists(path)
-    else:
-      diff_program = ["imgdiff"]
-      if os.path.exists(path):
-        diff_program.append("-b")
-        diff_program.append(path)
-        bonus_args = "--bonus /vendor/etc/recovery-resource.dat"
-      else:
-        bonus_args = ""
-
-    d = Difference(recovery_img, boot_img, diff_program=diff_program)
+    d = Difference(recovery_img, boot_img)
     _, _, patch = d.ComputePatch()
     output_sink("recovery-from-boot.p", patch)
 
@@ -3856,7 +3869,7 @@ fi
   else:
     sh = """#!/vendor/bin/sh
 if ! applypatch --check %(recovery_type)s:%(recovery_device)s:%(recovery_size)d:%(recovery_sha1)s; then
-  applypatch %(bonus_args)s \\
+  applypatch \\
           --patch /vendor/recovery-from-boot.p \\
           --source %(boot_type)s:%(boot_device)s:%(boot_size)d:%(boot_sha1)s \\
           --target %(recovery_type)s:%(recovery_device)s:%(recovery_size)d:%(recovery_sha1)s && \\
@@ -3872,16 +3885,11 @@ fi
        'boot_type': boot_type,
        'boot_device': boot_device + '$(getprop ro.boot.slot_suffix)',
        'recovery_type': recovery_type,
-       'recovery_device': recovery_device + '$(getprop ro.boot.slot_suffix)',
-       'bonus_args': bonus_args}
+       'recovery_device': recovery_device + '$(getprop ro.boot.slot_suffix)'}
 
   # The install script location moved from /system/etc to /system/bin in the L
   # release. In the R release it is in VENDOR/bin or SYSTEM/vendor/bin.
-  sh_location = os.path.join(sh_dir, "install-recovery.sh")
-
-  logger.info("putting script in %s", sh_location)
-
-  output_sink(sh_location, sh.encode())
+  output_sink("bin/install-recovery.sh", sh.encode())
 
 
 class DynamicPartitionUpdate(object):
@@ -3920,10 +3928,14 @@ class DynamicGroupUpdate(object):
 
 class DynamicPartitionsDifference(object):
   def __init__(self, info_dict, block_diffs, progress_dict=None,
-               source_info_dict=None):
+               source_info_dict=None, build_without_vendor=False):
     if progress_dict is None:
       progress_dict = {}
 
+    self._have_super_empty = \
+      info_dict.get("build_super_empty_partition") == "true"
+
+    self._build_without_vendor = build_without_vendor
     self._remove_all_before_apply = False
     if source_info_dict is None:
       self._remove_all_before_apply = True
@@ -4020,8 +4032,13 @@ class DynamicPartitionsDifference(object):
     ZipWrite(output_zip, op_list_path, "dynamic_partitions_op_list")
 
     script.Comment('Update dynamic partition metadata')
-    script.AppendExtra('assert(update_dynamic_partitions('
-                       'package_extract_file("dynamic_partitions_op_list")));')
+    if self._have_super_empty:
+      script.AppendExtra('assert(update_dynamic_partitions('
+                        'package_extract_file("dynamic_partitions_op_list"), '
+                        'package_extract_file("unsparse_super_empty.img")));')
+    else:
+      script.AppendExtra('assert(update_dynamic_partitions('
+                        'package_extract_file("dynamic_partitions_op_list")));')
 
     if write_verify_script:
       for p, u in self._partition_updates.items():
@@ -4048,6 +4065,17 @@ class DynamicPartitionsDifference(object):
     def comment(line):
       self._op_list.append("# %s" % line)
 
+    if self._build_without_vendor:
+      comment('System-only build, keep original vendor partition')
+      # When building without vendor, we do not want to override
+      # any partition already existing. In this case, we can only
+      # resize, but not remove / create / re-create any other
+      # partition.
+      for p, u in self._partition_updates.items():
+        comment('Resize partition %s to %s' % (p, u.tgt_size))
+        append('resize %s %s' % (p, u.tgt_size))
+      return
+
     if self._remove_all_before_apply:
       comment('Remove all existing dynamic partitions and groups before '
               'applying full OTA')
@@ -4130,8 +4158,14 @@ def GetBootImageBuildProp(boot_img, ramdisk_format=RamdiskFormat.LZ4):
           p2 = Run(['gzip', '-d'], stdin=input_stream.fileno(),
                    stdout=output_stream.fileno())
           p2.wait()
+    elif ramdisk_format == RamdiskFormat.XZ:
+      with open(ramdisk, 'rb') as input_stream:
+        with open(uncompressed_ramdisk, 'wb') as output_stream:
+          p2 = Run(['xz', '-d'], stdin=input_stream.fileno(),
+                   stdout=output_stream.fileno())
+          p2.wait()
     else:
-      logger.error('Only support lz4 or gzip ramdisk format.')
+      logger.error('Only support lz4, xz or gzip ramdisk format.')
       return None
 
     abs_uncompressed_ramdisk = os.path.abspath(uncompressed_ramdisk)

tools/releasetools/edify_generator.py

@@ -137,20 +137,39 @@ class EdifyGenerator(object):
 
   def AssertDevice(self, device):
     """Assert that the device identifier is the given string."""
-    cmd = ('getprop("ro.product.device") == "%s" || '
-           'abort("E%d: This package is for \\"%s\\" devices; '
-           'this is a \\"" + getprop("ro.product.device") + "\\".");') % (
-               device, common.ErrorCode.DEVICE_MISMATCH, device)
-    self.script.append(cmd)
+    cmd = ('assert(' +
+           ' || \0'.join(['getprop("ro.product.device") == "%s" || getprop("ro.build.product") == "%s"'
+                         % (i, i) for i in device.split(",")]) +
+           ' || abort("E%d: This package is for device: %s; ' +
+           'this device is " + getprop("ro.product.device") + ".");' +
+           ');') % (common.ErrorCode.DEVICE_MISMATCH, device)
+    self.script.append(self.WordWrap(cmd))
 
   def AssertSomeBootloader(self, *bootloaders):
-    """Asert that the bootloader version is one of *bootloaders."""
+    """Assert that the bootloader version is one of *bootloaders."""
     cmd = ("assert(" +
            " ||\0".join(['getprop("ro.bootloader") == "%s"' % (b,)
                          for b in bootloaders]) +
+           ' || abort("This package supports bootloader(s): ' +
+           ", ".join(["%s" % (b,) for b in bootloaders]) +
+           '; this device has bootloader " + getprop("ro.bootloader") + ".");' +
            ");")
     self.script.append(self.WordWrap(cmd))
 
+  def RunBackup(self, command, dynamic=False):
+    systemEntry = self.fstab["/system"]
+    if dynamic:
+      for p in ["vendor", "product", "system_ext"]:
+        fstabEntry = self.fstab.get("/"+p, None)
+        if fstabEntry:
+          self.script.append('map_partition("%s");' % (fstabEntry.device,))
+
+      self.script.append(('run_program("/tmp/install/bin/backuptool.sh", "%s", map_partition("%s"), "%s");' % (
+          command, systemEntry.device, systemEntry.fs_type)))
+    else:
+      self.script.append(('run_program("/tmp/install/bin/backuptool.sh", "%s", "%s", "%s");' % (
+          command, systemEntry.device, systemEntry.fs_type)))
+
   def ShowProgress(self, frac, dur):
     """Update the progress bar, advancing it over 'frac' over the next
     'dur' seconds.  'dur' may be zero to advance it via SetProgress
@@ -243,6 +262,17 @@ class EdifyGenerator(object):
           p.mount_point, mount_flags))
       self.mounts.add(p.mount_point)
 
+  def Unmount(self, mount_point):
+    """Unmount the partition with the given mount_point."""
+    if mount_point in self.mounts:
+      self.mounts.remove(mount_point)
+      self.script.append('unmount("%s");' % (mount_point,))
+
+  def UnpackPackageDir(self, src, dst):
+    """Unpack a given directory from the OTA package into the given
+    destination directory."""
+    self.script.append('package_extract_dir("%s", "%s");' % (src, dst))
+
   def Comment(self, comment):
     """Write a comment into the update script."""
     self.script.append("")
@@ -381,6 +411,21 @@ class EdifyGenerator(object):
         assert not entry.slotselect, \
           "Use %s because %s is slot suffixed" % (fn, lst[1])
 
+  def SetPermissionsRecursive(self, fn, uid, gid, dmode, fmode, selabel,
+                              capabilities):
+    """Recursively set path ownership and permissions."""
+    if capabilities is None:
+      capabilities = "0x0"
+    cmd = 'set_metadata_recursive("%s", "uid", %d, "gid", %d, ' \
+        '"dmode", 0%o, "fmode", 0%o' \
+        % (fn, uid, gid, dmode, fmode)
+    if not fn.startswith("/tmp"):
+      cmd += ', "capabilities", "%s"' % capabilities
+    if selabel is not None:
+      cmd += ', "selabel", "%s"' % selabel
+    cmd += ');'
+    self.script.append(cmd)
+
   def WriteRawImage(self, mount_point, fn, mapfn=None):
     """Write the given package file into the partition for the given
     mount point."""

tools/releasetools/make_recovery_patch.py

@@ -49,13 +49,19 @@ def main(argv):
 
   board_uses_vendorimage = OPTIONS.info_dict.get(
       "board_uses_vendorimage") == "true"
+  board_builds_vendorimage =  OPTIONS.info_dict.get(
+      "board_builds_vendorimage") == "true"
+  target_files_dir = None
 
-  if board_uses_vendorimage:
+  if board_builds_vendorimage:
     target_files_dir = "VENDOR"
-  else:
-    target_files_dir = "SYSTEM"
+  elif not board_uses_vendorimage:
+    target_files_dir = "SYSTEM/vendor"
 
   def output_sink(fn, data):
+    if target_files_dir is None:
+      return
+
     with open(os.path.join(output_dir, target_files_dir,
                            *fn.split("/")), "wb") as f:
       f.write(data)

tools/releasetools/non_ab_ota.py

@@ -109,6 +109,15 @@ def GetBlockDifferences(target_zip, source_zip, target_info, source_info,
   return block_diff_dict
 
 
+def CopyInstallTools(output_zip):
+  install_path = os.path.join(OPTIONS.input_tmp, "INSTALL")
+  for root, subdirs, files in os.walk(install_path):
+     for f in files:
+      install_source = os.path.join(root, f)
+      install_target = os.path.join("install", os.path.relpath(root, install_path), f)
+      output_zip.write(install_source, install_target)
+
+
 def WriteFullOTAPackage(input_zip, output_file):
   target_info = common.BuildInfo(OPTIONS.info_dict, OPTIONS.oem_dicts)
 
@@ -143,9 +152,9 @@ def WriteFullOTAPackage(input_zip, output_file):
   assert HasRecoveryPatch(input_zip, info_dict=OPTIONS.info_dict)
 
   # Assertions (e.g. downgrade check, device properties check).
-  ts = target_info.GetBuildProp("ro.build.date.utc")
-  ts_text = target_info.GetBuildProp("ro.build.date")
-  script.AssertOlderBuild(ts, ts_text)
+  #ts = target_info.GetBuildProp("ro.build.date.utc")
+  #ts_text = target_info.GetBuildProp("ro.build.date")
+  #script.AssertOlderBuild(ts, ts_text)
 
   target_info.WriteDeviceAssertions(script, OPTIONS.oem_no_mount)
   device_specific.FullOTA_Assertions()
@@ -177,6 +186,8 @@ def WriteFullOTAPackage(input_zip, output_file):
 
   recovery_img = common.GetBootableImage("recovery.img", "recovery.img",
                                          OPTIONS.input_tmp, "RECOVERY")
+  common.CheckSize(recovery_img.data, "recovery.img", target_info)
+  common.ZipWriteStr(output_zip, "recovery.img", recovery_img.data)
   if OPTIONS.two_step:
     if not target_info.get("multistage_support"):
       assert False, "two-step packages not supported by this build"
@@ -184,7 +195,6 @@ def WriteFullOTAPackage(input_zip, output_file):
     assert fs.fs_type.upper() == "EMMC", \
         "two-step packages only supported on devices with EMMC /misc partitions"
     bcb_dev = {"bcb_dev": fs.device}
-    common.ZipWriteStr(output_zip, "recovery.img", recovery_img.data)
     script.AppendExtra("""
 if get_stage("%(bcb_dev)s") == "2/3" then
 """ % bcb_dev)
@@ -206,6 +216,14 @@ else if get_stage("%(bcb_dev)s") == "3/3" then
 
   device_specific.FullOTA_InstallBegin()
 
+  CopyInstallTools(output_zip)
+  script.UnpackPackageDir("install", "/tmp/install")
+  script.SetPermissionsRecursive("/tmp/install", 0, 0, 0o755, 0o644, None, None)
+  script.SetPermissionsRecursive("/tmp/install/bin", 0, 0, 0o755, 0o755, None, None)
+
+  if OPTIONS.backuptool:
+    script.RunBackup("backup", target_info.get('use_dynamic_partitions') == "true")
+
   # All other partitions as well as the data wipe use 10% of the progress, and
   # the update of the system partition takes the remaining progress.
   system_progress = 0.9 - (len(block_diff_dict) - 1) * 0.1
@@ -215,12 +233,22 @@ else if get_stage("%(bcb_dev)s") == "3/3" then
   progress_dict["system"] = system_progress
 
   if target_info.get('use_dynamic_partitions') == "true":
+    # Add non-sparse super empty image to OTA package if it exists
+    if target_info.get('build_super_empty_partition') == "true":
+      unsparse_super_empty_image_name = "unsparse_super_empty.img"
+      unsparse_super_empty_image_path = os.path.join(OPTIONS.input_tmp, "IMAGES",
+          unsparse_super_empty_image_name)
+      unsparse_super_empty_image = common.File.FromLocalFile(
+          unsparse_super_empty_image_name, unsparse_super_empty_image_path)
+      common.ZipWriteStr(output_zip, unsparse_super_empty_image_name,
+          unsparse_super_empty_image.data)
     # Use empty source_info_dict to indicate that all partitions / groups must
     # be re-added.
     dynamic_partitions_diff = common.DynamicPartitionsDifference(
         info_dict=OPTIONS.info_dict,
         block_diffs=block_diff_dict.values(),
-        progress_dict=progress_dict)
+        progress_dict=progress_dict,
+        build_without_vendor=(not HasPartition(input_zip, "vendor")))
     dynamic_partitions_diff.WriteScript(script, output_zip,
                                         write_verify_script=OPTIONS.verify)
   else:
@@ -236,6 +264,12 @@ else if get_stage("%(bcb_dev)s") == "3/3" then
   common.CheckSize(boot_img.data, "boot.img", target_info)
   common.ZipWriteStr(output_zip, "boot.img", boot_img.data)
 
+  device_specific.FullOTA_PostValidate()
+
+  if OPTIONS.backuptool:
+    script.ShowProgress(0.02, 10)
+    script.RunBackup("restore", target_info.get('use_dynamic_partitions') == "true")
+
   script.WriteRawImage("/boot", "boot.img")
 
   script.ShowProgress(0.1, 10)
@@ -676,12 +710,17 @@ def _WriteRecoveryImageToBoot(script, output_zip):
 
 def HasRecoveryPatch(target_files_zip, info_dict):
   board_uses_vendorimage = info_dict.get("board_uses_vendorimage") == "true"
+  board_builds_vendorimage = info_dict.get("board_builds_vendorimage") == "true"
+  target_files_dir = None
 
-  if board_uses_vendorimage:
+  if board_builds_vendorimage:
     target_files_dir = "VENDOR"
-  else:
+  elif not board_uses_vendorimage:
     target_files_dir = "SYSTEM/vendor"
 
+  if target_files_dir is None:
+    return True
+
   patch = "%s/recovery-from-boot.p" % target_files_dir
   img = "%s/etc/recovery.img" % target_files_dir
 

tools/releasetools/ota_from_target_files.py

@@ -144,6 +144,10 @@ Non-A/B OTA specific options
       that any changes made to the system partition are done using the new
       recovery (new kernel, etc.).
 
+  --backup <boolean>
+      Enable or disable the execution of backuptool.sh.
+      Disabled by default.
+
 A/B OTA specific options
 
   --disable_fec_computation
@@ -304,6 +308,7 @@ OPTIONS.worker_threads = multiprocessing.cpu_count() // 2
 if OPTIONS.worker_threads == 0:
   OPTIONS.worker_threads = 1
 OPTIONS.two_step = False
+OPTIONS.backuptool = False
 OPTIONS.include_secondary = False
 OPTIONS.block_based = True
 OPTIONS.updater_binary = None
@@ -1221,6 +1226,8 @@ def main(argv):
                          "integers are allowed." % (a, o))
     elif o in ("-2", "--two_step"):
       OPTIONS.two_step = True
+    elif o == "--backup":
+      OPTIONS.backuptool = True
     elif o == "--include_secondary":
       OPTIONS.include_secondary = True
     elif o == "--no_signing":
@@ -1336,6 +1343,7 @@ def main(argv):
                                  "extra_script=",
                                  "worker_threads=",
                                  "two_step",
+                                 "backup=",
                                  "include_secondary",
                                  "no_signing",
                                  "block",

tools/releasetools/ota_utils.py

@@ -45,7 +45,7 @@ OPTIONS.boot_variable_file = None
 
 METADATA_NAME = 'META-INF/com/android/metadata'
 METADATA_PROTO_NAME = 'META-INF/com/android/metadata.pb'
-UNZIP_PATTERN = ['IMAGES/*', 'META/*', 'OTA/*',
+UNZIP_PATTERN = ['IMAGES/*', 'INSTALL/*', 'META/*', 'OTA/*',
                  'RADIO/*', '*/build.prop', '*/default.prop', '*/build.default', "*/etc/vintf/*"]
 SECURITY_PATCH_LEVEL_PROP_NAME = "ro.build.version.security_patch"
 TARGET_FILES_IMAGES_SUBDIR = ["IMAGES", "PREBUILT_IMAGES", "RADIO"]
@@ -223,9 +223,13 @@ def UpdateDeviceState(device_state, build_info, boot_variable_values,
       partition_devices = set()
       partition_fingerprints = set()
       for runtime_build_info in build_info_set:
-        partition_devices.add(
-            runtime_build_info.GetPartitionBuildProp('ro.product.device',
-                                                     partition))
+        try:
+            partition_devices.add(
+                runtime_build_info.GetPartitionBuildProp('ro.product.device',
+                                                         partition))
+        except common.ExternalError:
+            partition_devices.add(
+                runtime_build_info.GetBuildProp('ro.product.device'))
         partition_fingerprints.add(
             runtime_build_info.GetPartitionFingerprint(partition))
 

tools/releasetools/sign_target_files_apks.py

@@ -1221,6 +1221,7 @@ def BuildKeyMap(misc_info, key_mapping_options):
           devkeydir + "/platform": d + "/platform",
           devkeydir + "/networkstack": d + "/networkstack",
           devkeydir + "/sdk_sandbox": d + "/sdk_sandbox",
+          devkeydir + "/bluetooth": d + "/bluetooth",
       })
     else:
       OPTIONS.key_map[s] = d