# Put some miscellaneous rules here # HACK: clear LOCAL_PATH from including last build target before calling # intermedites-dir-for LOCAL_PATH := $(BUILD_SYSTEM) # ----------------------------------------------------------------- # Define rules to copy PRODUCT_COPY_FILES defined by the product. # PRODUCT_COPY_FILES contains words like :[:]. # is relative to $(PRODUCT_OUT), so it should look like, # e.g., "system/etc/file.xml". # The filter part means "only eval the copy-one-file rule if this # src:dest pair is the first one to match the same dest" #$(1): the src:dest pair define check-product-copy-files $(if $(filter %.apk, $(call word-colon, 2, $(1))),$(error \ Prebuilt apk found in PRODUCT_COPY_FILES: $(1), use BUILD_PREBUILT instead!)) endef # filter out the duplicate : pairs. unique_product_copy_files_pairs := $(foreach cf,$(PRODUCT_COPY_FILES), \ $(if $(filter $(unique_product_copy_files_pairs),$(cf)),,\ $(eval unique_product_copy_files_pairs += $(cf)))) unique_product_copy_files_destinations := product_copy_files_ignored := $(foreach cf,$(unique_product_copy_files_pairs), \ $(eval _src := $(call word-colon,1,$(cf))) \ $(eval _dest := $(call word-colon,2,$(cf))) \ $(call check-product-copy-files,$(cf)) \ $(if $(filter $(unique_product_copy_files_destinations),$(_dest)), \ $(eval product_copy_files_ignored += $(cf)), \ $(eval _fulldest := $(call append-path,$(PRODUCT_OUT),$(_dest))) \ $(if $(filter %.xml,$(_dest)),\ $(eval $(call copy-xml-file-checked,$(_src),$(_fulldest))),\ $(if $(and $(filter %.jar,$(_dest)),$(filter $(basename $(notdir $(_dest))),$(PRODUCT_LOADED_BY_PRIVILEGED_MODULES))),\ $(eval $(call copy-and-uncompress-dexs,$(_src),$(_fulldest))), \ $(eval $(call copy-one-file,$(_src),$(_fulldest))))) \ $(eval ALL_DEFAULT_INSTALLED_MODULES += $(_fulldest)) \ $(eval unique_product_copy_files_destinations += $(_dest)))) # Dump a list of overriden (and ignored PRODUCT_COPY_FILES entries) $(file >$(PRODUCT_OUT)/product_copy_files_ignored.txt,$(subst $(space),$(newline),$(strip $(product_copy_files_ignored)))) ifdef dist_goal $(file >$(DIST_DIR)/logs/product_copy_files_ignored.txt,$(subst $(space),$(newline),$(strip $(product_copy_files_ignored)))) endif product_copy_files_ignored := unique_product_copy_files_pairs := unique_product_copy_files_destinations := # ----------------------------------------------------------------- # Returns the max allowed size for an image suitable for hash verification # (e.g., boot.img, recovery.img, etc). # The value 69632 derives from MAX_VBMETA_SIZE + MAX_FOOTER_SIZE in $(AVBTOOL). # $(1): partition size to flash the image define get-hash-image-max-size $(if $(1), \ $(if $(filter true,$(BOARD_AVB_ENABLE)), \ $(eval _hash_meta_size := 69632), \ $(eval _hash_meta_size := 0)) \ $(1)-$(_hash_meta_size)) endef # ----------------------------------------------------------------- # Define rules to copy headers defined in copy_headers.mk # If more than one makefile declared a header, print a warning, # then copy the last one defined. This matches the previous make # behavior. $(foreach dest,$(ALL_COPIED_HEADERS), \ $(eval _srcs := $(ALL_COPIED_HEADERS.$(dest).SRC)) \ $(eval _src := $(word $(words $(_srcs)),$(_srcs))) \ $(if $(call streq,$(_src),$(_srcs)),, \ $(warning Duplicate header copy: $(dest)) \ $(warning Defined in: $(ALL_COPIED_HEADERS.$(dest).MAKEFILE))) \ $(eval $(call copy-one-header,$(_src),$(dest)))) all_copied_headers: $(ALL_COPIED_HEADERS) # ----------------------------------------------------------------- # docs/index.html ifeq (,$(TARGET_BUILD_APPS)) gen := $(OUT_DOCS)/index.html ALL_DOCS += $(gen) $(gen): frameworks/base/docs/docs-redirect-index.html @mkdir -p $(dir $@) @cp -f $< $@ endif ndk_doxygen_out := $(OUT_NDK_DOCS) ndk_headers := $(SOONG_OUT_DIR)/ndk/sysroot/usr/include ndk_docs_src_dir := frameworks/native/docs ndk_doxyfile := $(ndk_docs_src_dir)/Doxyfile ifneq ($(wildcard $(ndk_docs_src_dir)),) ndk_docs_srcs := $(addprefix $(ndk_docs_src_dir)/,\ $(call find-files-in-subdirs,$(ndk_docs_src_dir),"*",.)) $(ndk_doxygen_out)/index.html: $(ndk_docs_srcs) $(SOONG_OUT_DIR)/ndk.timestamp @mkdir -p $(ndk_doxygen_out) @echo "Generating NDK docs to $(ndk_doxygen_out)" @( cat $(ndk_doxyfile); \ echo "INPUT=$(ndk_headers)"; \ echo "HTML_OUTPUT=$(ndk_doxygen_out)" \ ) | doxygen - # Note: Not a part of the docs target because we don't have doxygen available. # You can run this target locally if you have doxygen installed. ndk-docs: $(ndk_doxygen_out)/index.html .PHONY: ndk-docs endif # ----------------------------------------------------------------- # property_overrides_split_enabled property_overrides_split_enabled := ifeq ($(BOARD_PROPERTY_OVERRIDES_SPLIT_ENABLED), true) property_overrides_split_enabled := true endif # ----------------------------------------------------------------- # FINAL_VENDOR_DEFAULT_PROPERTIES will be installed in vendor/default.prop if # property_overrides_split_enabled is true. Otherwise it will be installed in # ROOT/default.prop. ifdef BOARD_VNDK_VERSION ifeq ($(BOARD_VNDK_VERSION),current) FINAL_VENDOR_DEFAULT_PROPERTIES := ro.vndk.version=$(PLATFORM_VNDK_VERSION) else FINAL_VENDOR_DEFAULT_PROPERTIES := ro.vndk.version=$(BOARD_VNDK_VERSION) endif else FINAL_VENDOR_DEFAULT_PROPERTIES := endif FINAL_VENDOR_DEFAULT_PROPERTIES += \ $(call collapse-pairs, $(PRODUCT_DEFAULT_PROPERTY_OVERRIDES)) FINAL_VENDOR_DEFAULT_PROPERTIES := $(call uniq-pairs-by-first-component, \ $(FINAL_VENDOR_DEFAULT_PROPERTIES),=) # ----------------------------------------------------------------- # prop.default ifdef property_overrides_split_enabled INSTALLED_DEFAULT_PROP_TARGET := $(TARGET_OUT)/etc/prop.default INSTALLED_DEFAULT_PROP_OLD_TARGET := $(TARGET_ROOT_OUT)/default.prop ALL_DEFAULT_INSTALLED_MODULES += $(INSTALLED_DEFAULT_PROP_OLD_TARGET) $(INSTALLED_DEFAULT_PROP_OLD_TARGET): $(INSTALLED_DEFAULT_PROP_TARGET) else # legacy path INSTALLED_DEFAULT_PROP_TARGET := $(TARGET_ROOT_OUT)/default.prop endif ALL_DEFAULT_INSTALLED_MODULES += $(INSTALLED_DEFAULT_PROP_TARGET) FINAL_DEFAULT_PROPERTIES := \ $(call collapse-pairs, $(ADDITIONAL_DEFAULT_PROPERTIES)) \ $(call collapse-pairs, $(PRODUCT_SYSTEM_DEFAULT_PROPERTIES)) ifndef property_overrides_split_enabled FINAL_DEFAULT_PROPERTIES += \ $(call collapse-pairs, $(FINAL_VENDOR_DEFAULT_PROPERTIES)) endif FINAL_DEFAULT_PROPERTIES := $(call uniq-pairs-by-first-component, \ $(FINAL_DEFAULT_PROPERTIES),=) intermediate_system_build_prop := $(call intermediates-dir-for,ETC,system_build_prop)/build.prop $(INSTALLED_DEFAULT_PROP_TARGET): $(intermediate_system_build_prop) @echo Target buildinfo: $@ @mkdir -p $(dir $@) @rm -f $@ $(hide) echo "#" > $@; \ echo "# ADDITIONAL_DEFAULT_PROPERTIES" >> $@; \ echo "#" >> $@; $(hide) $(foreach line,$(FINAL_DEFAULT_PROPERTIES), \ echo "$(line)" >> $@;) $(hide) echo "#" >> $@; \ echo "# BOOTIMAGE_BUILD_PROPERTIES" >> $@; \ echo "#" >> $@; $(hide) echo ro.bootimage.build.date=`$(DATE_FROM_FILE)`>>$@ $(hide) echo ro.bootimage.build.date.utc=`$(DATE_FROM_FILE) +%s`>>$@ $(hide) echo ro.bootimage.build.fingerprint="$(BUILD_FINGERPRINT_FROM_FILE)">>$@ $(hide) build/make/tools/post_process_props.py $@ ifdef property_overrides_split_enabled $(hide) mkdir -p $(TARGET_ROOT_OUT) $(hide) ln -sf system/etc/prop.default $(INSTALLED_DEFAULT_PROP_OLD_TARGET) endif # ----------------------------------------------------------------- # vendor default.prop INSTALLED_VENDOR_DEFAULT_PROP_TARGET := ifdef property_overrides_split_enabled INSTALLED_VENDOR_DEFAULT_PROP_TARGET := $(TARGET_OUT_VENDOR)/default.prop ALL_DEFAULT_INSTALLED_MODULES += $(INSTALLED_VENDOR_DEFAULT_PROP_TARGET) $(INSTALLED_VENDOR_DEFAULT_PROP_TARGET): $(INSTALLED_DEFAULT_PROP_TARGET) @echo Target buildinfo: $@ @mkdir -p $(dir $@) $(hide) echo "#" > $@; \ echo "# ADDITIONAL VENDOR DEFAULT PROPERTIES" >> $@; \ echo "#" >> $@; $(hide) $(foreach line,$(FINAL_VENDOR_DEFAULT_PROPERTIES), \ echo "$(line)" >> $@;) $(hide) build/make/tools/post_process_props.py $@ endif # property_overrides_split_enabled # ----------------------------------------------------------------- # build.prop INSTALLED_BUILD_PROP_TARGET := $(TARGET_OUT)/build.prop ALL_DEFAULT_INSTALLED_MODULES += $(INSTALLED_BUILD_PROP_TARGET) FINAL_BUILD_PROPERTIES := \ $(call collapse-pairs, $(ADDITIONAL_BUILD_PROPERTIES)) FINAL_BUILD_PROPERTIES := $(call uniq-pairs-by-first-component, \ $(FINAL_BUILD_PROPERTIES),=) # A list of arbitrary tags describing the build configuration. # Force ":=" so we can use += BUILD_VERSION_TAGS := $(BUILD_VERSION_TAGS) ifeq ($(TARGET_BUILD_TYPE),debug) BUILD_VERSION_TAGS += debug endif # The "test-keys" tag marks builds signed with the old test keys, # which are available in the SDK. "dev-keys" marks builds signed with # non-default dev keys (usually private keys from a vendor directory). # Both of these tags will be removed and replaced with "release-keys" # when the target-files is signed in a post-build step. ifeq ($(DEFAULT_SYSTEM_DEV_CERTIFICATE),build/target/product/security/testkey) BUILD_KEYS := test-keys else BUILD_KEYS := dev-keys endif BUILD_VERSION_TAGS += $(BUILD_KEYS) BUILD_VERSION_TAGS := $(subst $(space),$(comma),$(sort $(BUILD_VERSION_TAGS))) # A human-readable string that descibes this build in detail. build_desc := $(TARGET_PRODUCT)-$(TARGET_BUILD_VARIANT) $(PLATFORM_VERSION) $(BUILD_ID) $(BUILD_NUMBER_FROM_FILE) $(BUILD_VERSION_TAGS) $(intermediate_system_build_prop): PRIVATE_BUILD_DESC := $(build_desc) # The string used to uniquely identify the combined build and product; used by the OTA server. ifeq (,$(strip $(BUILD_FINGERPRINT))) ifeq ($(strip $(HAS_BUILD_NUMBER)),false) BF_BUILD_NUMBER := $(USER)$$($(DATE_FROM_FILE) +%m%d%H%M) else BF_BUILD_NUMBER := $(file <$(BUILD_NUMBER_FILE)) endif BUILD_FINGERPRINT := $(PRODUCT_BRAND)/$(TARGET_PRODUCT)/$(TARGET_DEVICE):$(PLATFORM_VERSION)/$(BUILD_ID)/$(BF_BUILD_NUMBER):$(TARGET_BUILD_VARIANT)/$(BUILD_VERSION_TAGS) endif # unset it for safety. BF_BUILD_NUMBER := BUILD_FINGERPRINT_FILE := $(PRODUCT_OUT)/build_fingerprint.txt ifneq (,$(shell mkdir -p $(PRODUCT_OUT) && echo $(BUILD_FINGERPRINT) >$(BUILD_FINGERPRINT_FILE) && grep " " $(BUILD_FINGERPRINT_FILE))) $(error BUILD_FINGERPRINT cannot contain spaces: "$(file <$(BUILD_FINGERPRINT_FILE))") endif BUILD_FINGERPRINT_FROM_FILE := $$(cat $(BUILD_FINGERPRINT_FILE)) # unset it for safety. BUILD_FINGERPRINT := # The string used to uniquely identify the system build; used by the OTA server. # This purposefully excludes any product-specific variables. ifeq (,$(strip $(BUILD_THUMBPRINT))) BUILD_THUMBPRINT := $(PLATFORM_VERSION)/$(BUILD_ID)/$(BUILD_NUMBER_FROM_FILE):$(TARGET_BUILD_VARIANT)/$(BUILD_VERSION_TAGS) endif BUILD_THUMBPRINT_FILE := $(PRODUCT_OUT)/build_thumbprint.txt ifneq (,$(shell mkdir -p $(PRODUCT_OUT) && echo $(BUILD_THUMBPRINT) >$(BUILD_THUMBPRINT_FILE) && grep " " $(BUILD_THUMBPRINT_FILE))) $(error BUILD_THUMBPRINT cannot contain spaces: "$(file <$(BUILD_THUMBPRINT_FILE))") endif BUILD_THUMBPRINT_FROM_FILE := $$(cat $(BUILD_THUMBPRINT_FILE)) # unset it for safety. BUILD_THUMBPRINT := KNOWN_OEM_THUMBPRINT_PROPERTIES := \ ro.product.brand \ ro.product.name \ ro.product.device OEM_THUMBPRINT_PROPERTIES := $(filter $(KNOWN_OEM_THUMBPRINT_PROPERTIES),\ $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_OEM_PROPERTIES)) # Display parameters shown under Settings -> About Phone ifeq ($(TARGET_BUILD_VARIANT),user) # User builds should show: # release build number or branch.buld_number non-release builds # Dev. branches should have DISPLAY_BUILD_NUMBER set ifeq (true,$(DISPLAY_BUILD_NUMBER)) BUILD_DISPLAY_ID := $(BUILD_ID).$(BUILD_NUMBER_FROM_FILE) $(BUILD_KEYS) else BUILD_DISPLAY_ID := $(BUILD_ID) $(BUILD_KEYS) endif else # Non-user builds should show detailed build information BUILD_DISPLAY_ID := $(build_desc) endif # Accepts a whitespace separated list of product locales such as # (en_US en_AU en_GB...) and returns the first locale in the list with # underscores replaced with hyphens. In the example above, this will # return "en-US". define get-default-product-locale $(strip $(subst _,-, $(firstword $(1)))) endef BUILDINFO_SH := build/make/tools/buildinfo.sh VENDOR_BUILDINFO_SH := build/make/tools/vendor_buildinfo.sh # TARGET_BUILD_FLAVOR and ro.build.flavor are used only by the test # harness to distinguish builds. Only add _asan for a sanitized build # if it isn't already a part of the flavor (via a dedicated lunch # config for example). TARGET_BUILD_FLAVOR := $(TARGET_PRODUCT)-$(TARGET_BUILD_VARIANT) ifneq (, $(filter address, $(SANITIZE_TARGET))) ifeq (,$(findstring _asan,$(TARGET_BUILD_FLAVOR))) TARGET_BUILD_FLAVOR := $(TARGET_BUILD_FLAVOR)_asan endif endif ifdef TARGET_SYSTEM_PROP system_prop_file := $(TARGET_SYSTEM_PROP) else system_prop_file := $(wildcard $(TARGET_DEVICE_DIR)/system.prop) endif $(intermediate_system_build_prop): $(BUILDINFO_SH) $(INTERNAL_BUILD_ID_MAKEFILE) $(BUILD_SYSTEM)/version_defaults.mk $(system_prop_file) $(INSTALLED_ANDROID_INFO_TXT_TARGET) @echo Target buildinfo: $@ @mkdir -p $(dir $@) $(hide) echo > $@ ifneq ($(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_OEM_PROPERTIES),) $(hide) echo "#" >> $@; \ echo "# PRODUCT_OEM_PROPERTIES" >> $@; \ echo "#" >> $@; $(hide) $(foreach prop,$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_OEM_PROPERTIES), \ echo "import /oem/oem.prop $(prop)" >> $@;) endif $(hide) TARGET_BUILD_TYPE="$(TARGET_BUILD_VARIANT)" \ TARGET_BUILD_FLAVOR="$(TARGET_BUILD_FLAVOR)" \ TARGET_DEVICE="$(TARGET_DEVICE)" \ PRODUCT_NAME="$(TARGET_PRODUCT)" \ PRODUCT_BRAND="$(PRODUCT_BRAND)" \ PRODUCT_DEFAULT_LOCALE="$(call get-default-product-locale,$(PRODUCT_LOCALES))" \ PRODUCT_DEFAULT_WIFI_CHANNELS="$(PRODUCT_DEFAULT_WIFI_CHANNELS)" \ PRODUCT_MODEL="$(PRODUCT_MODEL)" \ PRODUCT_MANUFACTURER="$(PRODUCT_MANUFACTURER)" \ PRIVATE_BUILD_DESC="$(PRIVATE_BUILD_DESC)" \ BUILD_ID="$(BUILD_ID)" \ BUILD_DISPLAY_ID="$(BUILD_DISPLAY_ID)" \ DATE="$(DATE_FROM_FILE)" \ BUILD_NUMBER="$(BUILD_NUMBER_FROM_FILE)" \ BOARD_BUILD_SYSTEM_ROOT_IMAGE="$(BOARD_BUILD_SYSTEM_ROOT_IMAGE)" \ AB_OTA_UPDATER="$(AB_OTA_UPDATER)" \ PLATFORM_VERSION="$(PLATFORM_VERSION)" \ PLATFORM_SECURITY_PATCH="$(PLATFORM_SECURITY_PATCH)" \ PLATFORM_BASE_OS="$(PLATFORM_BASE_OS)" \ PLATFORM_SDK_VERSION="$(PLATFORM_SDK_VERSION)" \ PLATFORM_PREVIEW_SDK_VERSION="$(PLATFORM_PREVIEW_SDK_VERSION)" \ PLATFORM_VERSION_CODENAME="$(PLATFORM_VERSION_CODENAME)" \ PLATFORM_VERSION_ALL_CODENAMES="$(PLATFORM_VERSION_ALL_CODENAMES)" \ BUILD_VERSION_TAGS="$(BUILD_VERSION_TAGS)" \ BUILD_FINGERPRINT="$(BUILD_FINGERPRINT_FROM_FILE)" \ $(if $(OEM_THUMBPRINT_PROPERTIES),BUILD_THUMBPRINT="$(BUILD_THUMBPRINT_FROM_FILE)") \ TARGET_CPU_ABI_LIST="$(TARGET_CPU_ABI_LIST)" \ TARGET_CPU_ABI_LIST_32_BIT="$(TARGET_CPU_ABI_LIST_32_BIT)" \ TARGET_CPU_ABI_LIST_64_BIT="$(TARGET_CPU_ABI_LIST_64_BIT)" \ TARGET_CPU_ABI="$(TARGET_CPU_ABI)" \ TARGET_CPU_ABI2="$(TARGET_CPU_ABI2)" \ TARGET_AAPT_CHARACTERISTICS="$(TARGET_AAPT_CHARACTERISTICS)" \ bash $(BUILDINFO_SH) >> $@ $(hide) $(foreach file,$(system_prop_file), \ if [ -f "$(file)" ]; then \ echo "#" >> $@; \ echo Target buildinfo from: "$(file)"; \ echo "# from $(file)" >> $@; \ echo "#" >> $@; \ cat $(file) >> $@; \ fi;) $(if $(FINAL_BUILD_PROPERTIES), \ $(hide) echo >> $@; \ echo "#" >> $@; \ echo "# ADDITIONAL_BUILD_PROPERTIES" >> $@; \ echo "#" >> $@; ) $(hide) $(foreach line,$(FINAL_BUILD_PROPERTIES), \ echo "$(line)" >> $@;) $(hide) cat $(INSTALLED_ANDROID_INFO_TXT_TARGET) | grep 'require version-' | sed -e 's/require version-/ro.build.expect./g' >> $@ $(hide) build/make/tools/post_process_props.py $@ $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SYSTEM_PROPERTY_BLACKLIST) build_desc := ifeq (,$(filter true, $(TARGET_NO_KERNEL) $(TARGET_NO_RECOVERY))) INSTALLED_RECOVERYIMAGE_TARGET := $(PRODUCT_OUT)/recovery.img else INSTALLED_RECOVERYIMAGE_TARGET := endif $(INSTALLED_BUILD_PROP_TARGET): $(intermediate_system_build_prop) $(INSTALLED_RECOVERYIMAGE_TARGET) @echo "Target build info: $@" $(hide) grep -v 'ro.product.first_api_level' $(intermediate_system_build_prop) > $@ ifdef INSTALLED_RECOVERYIMAGE_TARGET $(hide) echo ro.expect.recovery_id=`cat $(RECOVERYIMAGE_ID_FILE)` >> $@ endif # ----------------------------------------------------------------- # vendor build.prop # # For verifying that the vendor build is what we think it is INSTALLED_VENDOR_BUILD_PROP_TARGET := $(TARGET_OUT_VENDOR)/build.prop ALL_DEFAULT_INSTALLED_MODULES += $(INSTALLED_VENDOR_BUILD_PROP_TARGET) ifdef property_overrides_split_enabled FINAL_VENDOR_BUILD_PROPERTIES += \ $(call collapse-pairs, $(PRODUCT_PROPERTY_OVERRIDES)) FINAL_VENDOR_BUILD_PROPERTIES := $(call uniq-pairs-by-first-component, \ $(FINAL_VENDOR_BUILD_PROPERTIES),=) endif # property_overrides_split_enabled $(INSTALLED_VENDOR_BUILD_PROP_TARGET): $(VENDOR_BUILDINFO_SH) $(intermediate_system_build_prop) @echo Target vendor buildinfo: $@ @mkdir -p $(dir $@) $(hide) echo > $@ $(hide) grep 'ro.product.first_api_level' $(intermediate_system_build_prop) >> $@ || true $(hide) echo ro.vendor.build.date=`$(DATE_FROM_FILE)`>>$@ $(hide) echo ro.vendor.build.date.utc=`$(DATE_FROM_FILE) +%s`>>$@ $(hide) echo ro.vendor.build.fingerprint="$(BUILD_FINGERPRINT_FROM_FILE)">>$@ $(hide) echo ro.vendor.product.cpu.abilist="$(TARGET_CPU_ABI_LIST)">>$@ $(hide) echo ro.vendor.product.cpu.abilist32="$(TARGET_CPU_ABI_LIST_32_BIT)">>$@ $(hide) echo ro.vendor.product.cpu.abilist64="$(TARGET_CPU_ABI_LIST_64_BIT)">>$@ $(hide) TARGET_DEVICE="$(TARGET_DEVICE)" \ PRODUCT_NAME="$(TARGET_PRODUCT)" \ PRODUCT_BRAND="$(PRODUCT_BRAND)" \ PRODUCT_MODEL="$(PRODUCT_MODEL)" \ PRODUCT_MANUFACTURER="$(PRODUCT_MANUFACTURER)" \ TARGET_BOOTLOADER_BOARD_NAME="$(TARGET_BOOTLOADER_BOARD_NAME)" \ TARGET_BOARD_PLATFORM="$(TARGET_BOARD_PLATFORM)" \ bash $(VENDOR_BUILDINFO_SH) >> $@ ifdef property_overrides_split_enabled $(hide) echo "#" >> $@; \ echo "# ADDITIONAL VENDOR BUILD PROPERTIES" >> $@; \ echo "#" >> $@; $(hide) $(foreach line,$(FINAL_VENDOR_BUILD_PROPERTIES), \ echo "$(line)" >> $@;) $(hide) build/make/tools/post_process_props.py $@ endif # property_overrides_split_enabled # ----------------------------------------------------------------- # product build.prop INSTALLED_PRODUCT_BUILD_PROP_TARGET := $(TARGET_OUT_PRODUCT)/build.prop ALL_DEFAULT_INSTALLED_MODULES += $(INSTALLED_PRODUCT_BUILD_PROP_TARGET) FINAL_PRODUCT_PROPERTIES += \ $(call collapse-pairs, $(PRODUCT_PRODUCT_PROPERTIES)) FINAL_PRODUCT_PROPERTIES := $(call uniq-pairs-by-first-component, \ $(FINAL_PRODUCT_PROPERTIES),=) $(INSTALLED_PRODUCT_BUILD_PROP_TARGET): @echo Target product buildinfo: $@ @mkdir -p $(dir $@) $(hide) echo > $@ ifdef BOARD_USES_PRODUCTIMAGE $(hide) echo ro.product.build.date=`$(DATE_FROM_FILE)`>>$@ $(hide) echo ro.product.build.date.utc=`$(DATE_FROM_FILE) +%s`>>$@ $(hide) echo ro.product.build.fingerprint="$(BUILD_FINGERPRINT_FROM_FILE)">>$@ endif # BOARD_USES_PRODUCTIMAGE $(hide) echo "#" >> $@; \ echo "# ADDITIONAL PRODUCT PROPERTIES" >> $@; \ echo "#" >> $@; $(hide) $(foreach line,$(FINAL_PRODUCT_PROPERTIES), \ echo "$(line)" >> $@;) $(hide) build/make/tools/post_process_props.py $@ # ---------------------------------------------------------------- # ----------------------------------------------------------------- # sdk-build.prop # # There are certain things in build.prop that we don't want to # ship with the sdk; remove them. # This must be a list of entire property keys followed by # "=" characters, without any internal spaces. sdk_build_prop_remove := \ ro.build.user= \ ro.build.host= \ ro.product.brand= \ ro.product.manufacturer= \ ro.product.device= # TODO: Remove this soon-to-be obsolete property sdk_build_prop_remove += ro.build.product= INSTALLED_SDK_BUILD_PROP_TARGET := $(PRODUCT_OUT)/sdk/sdk-build.prop $(INSTALLED_SDK_BUILD_PROP_TARGET): $(INSTALLED_BUILD_PROP_TARGET) @echo SDK buildinfo: $@ @mkdir -p $(dir $@) $(hide) grep -v "$(subst $(space),\|,$(strip \ $(sdk_build_prop_remove)))" $< > $@.tmp $(hide) for x in $(sdk_build_prop_remove); do \ echo "$$x"generic >> $@.tmp; done $(hide) mv $@.tmp $@ # ----------------------------------------------------------------- # package stats PACKAGE_STATS_FILE := $(PRODUCT_OUT)/package-stats.txt PACKAGES_TO_STAT := \ $(sort $(filter $(TARGET_OUT)/% $(TARGET_OUT_DATA)/%, \ $(filter %.jar %.apk, $(ALL_DEFAULT_INSTALLED_MODULES)))) $(PACKAGE_STATS_FILE): $(PACKAGES_TO_STAT) @echo Package stats: $@ @mkdir -p $(dir $@) $(hide) rm -f $@ ifeq ($(PACKAGES_TO_STAT),) # Create empty package stats file if target builds no jar(s) or apk(s). $(hide) touch $@ else $(hide) build/make/tools/dump-package-stats $^ > $@ endif .PHONY: package-stats package-stats: $(PACKAGE_STATS_FILE) # ----------------------------------------------------------------- # Cert-to-package mapping. Used by the post-build signing tools. # Use a macro to add newline to each echo command define _apkcerts_write_line $(hide) echo -n 'name="$(1).apk" certificate="$2" private_key="$3"' >> $5 $(if $(4), $(hide) echo -n ' compressed="$4"' >> $5) $(hide) echo '' >> $5 endef name := $(TARGET_PRODUCT) ifeq ($(TARGET_BUILD_TYPE),debug) name := $(name)_debug endif name := $(name)-apkcerts-$(FILE_NAME_TAG) intermediates := \ $(call intermediates-dir-for,PACKAGING,apkcerts) APKCERTS_FILE := $(intermediates)/$(name).txt # We don't need to really build all the modules. # TODO: rebuild APKCERTS_FILE if any app change its cert. $(APKCERTS_FILE): @echo APK certs list: $@ @mkdir -p $(dir $@) @rm -f $@ $(foreach p,$(PACKAGES),\ $(if $(PACKAGES.$(p).EXTERNAL_KEY),\ $(call _apkcerts_write_line,$(p),"EXTERNAL","",$(PACKAGES.$(p).COMPRESSED),$@),\ $(call _apkcerts_write_line,$(p),$(PACKAGES.$(p).CERTIFICATE),$(PACKAGES.$(p).PRIVATE_KEY),$(PACKAGES.$(p).COMPRESSED),$@))) # In case value of PACKAGES is empty. $(hide) touch $@ .PHONY: apkcerts-list apkcerts-list: $(APKCERTS_FILE) ifneq (,$(TARGET_BUILD_APPS)) $(call dist-for-goals, apps_only, $(APKCERTS_FILE):apkcerts.txt) endif # ----------------------------------------------------------------- # build system stats BUILD_SYSTEM_STATS := $(PRODUCT_OUT)/build_system_stats.txt $(BUILD_SYSTEM_STATS): @rm -f $@ @$(foreach s,$(STATS.MODULE_TYPE),echo "modules_type_make,$(s),$(words $(STATS.MODULE_TYPE.$(s)))" >>$@;) @$(foreach s,$(STATS.SOONG_MODULE_TYPE),echo "modules_type_soong,$(s),$(STATS.SOONG_MODULE_TYPE.$(s))" >>$@;) $(call dist-for-goals,droidcore,$(BUILD_SYSTEM_STATS)) # ----------------------------------------------------------------- # Modules ready to be converted to Soong, ordered by how many # modules depend on them. SOONG_CONV := $(sort $(SOONG_CONV)) SOONG_CONV_DATA := $(call intermediates-dir-for,PACKAGING,soong_conversion)/soong_conv_data $(SOONG_CONV_DATA): @rm -f $@ @$(foreach s,$(SOONG_CONV),echo "$(s),$(SOONG_CONV.$(s).TYPE),$(sort $(SOONG_CONV.$(s).PROBLEMS)),$(sort $(filter-out $(SOONG_ALREADY_CONV),$(SOONG_CONV.$(s).DEPS)))" >>$@;) SOONG_TO_CONVERT_SCRIPT := build/make/tools/soong_to_convert.py SOONG_TO_CONVERT := $(PRODUCT_OUT)/soong_to_convert.txt $(SOONG_TO_CONVERT): $(SOONG_CONV_DATA) $(SOONG_TO_CONVERT_SCRIPT) @rm -f $@ $(hide) $(SOONG_TO_CONVERT_SCRIPT) $< >$@ $(call dist-for-goals,droidcore,$(SOONG_TO_CONVERT)) # ----------------------------------------------------------------- # Modules use -Wno-error, or added default -Wall -Werror WALL_WERROR := $(PRODUCT_OUT)/wall_werror.txt $(WALL_WERROR): @rm -f $@ echo "# Modules using -Wno-error" >> $@ for m in $(sort $(SOONG_MODULES_USING_WNO_ERROR) $(MODULES_USING_WNO_ERROR)); do echo $$m >> $@; done echo "# Modules added default -Wall" >> $@ for m in $(sort $(SOONG_MODULES_ADDED_WALL) $(MODULES_ADDED_WALL)); do echo $$m >> $@; done $(call dist-for-goals,droidcore,$(WALL_WERROR)) # ----------------------------------------------------------------- # Modules missing profile files PGO_PROFILE_MISSING := $(PRODUCT_OUT)/pgo_profile_file_missing.txt $(PGO_PROFILE_MISSING): @rm -f $@ echo "# Modules missing PGO profile files" >> $@ for m in $(SOONG_MODULES_MISSING_PGO_PROFILE_FILE); do echo $$m >> $@; done $(call dist-for-goals,droidcore,$(PGO_PROFILE_MISSING)) # ----------------------------------------------------------------- # The dev key is used to sign this package, and as the key required # for future OTA packages installed by this system. Actual product # deliverables will be re-signed by hand. We expect this file to # exist with the suffixes ".x509.pem" and ".pk8". DEFAULT_KEY_CERT_PAIR := $(DEFAULT_SYSTEM_DEV_CERTIFICATE) # Rules that need to be present for the all targets, even # if they don't do anything. .PHONY: systemimage systemimage: # ----------------------------------------------------------------- .PHONY: event-log-tags # Produce an event logs tag file for everything we know about, in order # to properly allocate numbers. Then produce a file that's filtered # for what's going to be installed. all_event_log_tags_file := $(TARGET_OUT_COMMON_INTERMEDIATES)/all-event-log-tags.txt event_log_tags_file := $(TARGET_OUT)/etc/event-log-tags # Include tags from all packages that we know about all_event_log_tags_src := \ $(sort $(foreach m, $(ALL_MODULES), $(ALL_MODULES.$(m).EVENT_LOG_TAGS))) # PDK builds will already have a full list of tags that needs to get merged # in with the ones from source pdk_fusion_log_tags_file := $(patsubst $(PRODUCT_OUT)/%,$(_pdk_fusion_intermediates)/%,$(filter $(event_log_tags_file),$(ALL_PDK_FUSION_FILES))) $(all_event_log_tags_file): PRIVATE_SRC_FILES := $(all_event_log_tags_src) $(pdk_fusion_log_tags_file) $(all_event_log_tags_file): $(all_event_log_tags_src) $(pdk_fusion_log_tags_file) $(MERGETAGS) build/make/tools/event_log_tags.py $(hide) mkdir -p $(dir $@) $(hide) $(MERGETAGS) -o $@ $(PRIVATE_SRC_FILES) # Include tags from all packages included in this product, plus all # tags that are part of the system (ie, not in a vendor/ or device/ # directory). event_log_tags_src := \ $(sort $(foreach m,\ $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PACKAGES) \ $(call module-names-for-tag-list,user), \ $(ALL_MODULES.$(m).EVENT_LOG_TAGS)) \ $(filter-out vendor/% device/% out/%,$(all_event_log_tags_src))) $(event_log_tags_file): PRIVATE_SRC_FILES := $(event_log_tags_src) $(pdk_fusion_log_tags_file) $(event_log_tags_file): PRIVATE_MERGED_FILE := $(all_event_log_tags_file) $(event_log_tags_file): $(event_log_tags_src) $(all_event_log_tags_file) $(pdk_fusion_log_tags_file) $(MERGETAGS) build/make/tools/event_log_tags.py $(hide) mkdir -p $(dir $@) $(hide) $(MERGETAGS) -o $@ -m $(PRIVATE_MERGED_FILE) $(PRIVATE_SRC_FILES) event-log-tags: $(event_log_tags_file) ALL_DEFAULT_INSTALLED_MODULES += $(event_log_tags_file) # ################################################################# # Targets for boot/OS images # ################################################################# ifneq ($(strip $(TARGET_NO_BOOTLOADER)),true) INSTALLED_BOOTLOADER_MODULE := $(PRODUCT_OUT)/bootloader ifeq ($(strip $(TARGET_BOOTLOADER_IS_2ND)),true) INSTALLED_2NDBOOTLOADER_TARGET := $(PRODUCT_OUT)/2ndbootloader else INSTALLED_2NDBOOTLOADER_TARGET := endif else INSTALLED_BOOTLOADER_MODULE := INSTALLED_2NDBOOTLOADER_TARGET := endif # TARGET_NO_BOOTLOADER ifneq ($(strip $(TARGET_NO_KERNEL)),true) INSTALLED_KERNEL_TARGET := $(PRODUCT_OUT)/kernel else INSTALLED_KERNEL_TARGET := endif # ----------------------------------------------------------------- # the ramdisk INTERNAL_RAMDISK_FILES := $(filter $(TARGET_ROOT_OUT)/%, \ $(ALL_GENERATED_SOURCES) \ $(ALL_DEFAULT_INSTALLED_MODULES)) BUILT_RAMDISK_TARGET := $(PRODUCT_OUT)/ramdisk.img # We just build this directly to the install location. INSTALLED_RAMDISK_TARGET := $(BUILT_RAMDISK_TARGET) $(INSTALLED_RAMDISK_TARGET): $(MKBOOTFS) $(INTERNAL_RAMDISK_FILES) | $(MINIGZIP) $(call pretty,"Target ram disk: $@") $(hide) $(MKBOOTFS) -d $(TARGET_OUT) $(TARGET_ROOT_OUT) | $(MINIGZIP) > $@ .PHONY: ramdisk-nodeps ramdisk-nodeps: $(MKBOOTFS) | $(MINIGZIP) @echo "make $@: ignoring dependencies" $(hide) $(MKBOOTFS) -d $(TARGET_OUT) $(TARGET_ROOT_OUT) | $(MINIGZIP) > $(INSTALLED_RAMDISK_TARGET) INSTALLED_BOOTIMAGE_TARGET := $(PRODUCT_OUT)/boot.img ifneq ($(strip $(TARGET_NO_KERNEL)),true) # ----------------------------------------------------------------- # the boot image, which is a collection of other images. INTERNAL_BOOTIMAGE_ARGS := \ $(addprefix --second ,$(INSTALLED_2NDBOOTLOADER_TARGET)) \ --kernel $(INSTALLED_KERNEL_TARGET) ifneq ($(BOARD_BUILD_SYSTEM_ROOT_IMAGE),true) INTERNAL_BOOTIMAGE_ARGS += --ramdisk $(INSTALLED_RAMDISK_TARGET) endif INTERNAL_BOOTIMAGE_FILES := $(filter-out --%,$(INTERNAL_BOOTIMAGE_ARGS)) ifdef BOARD_KERNEL_BASE INTERNAL_BOOTIMAGE_ARGS += --base $(BOARD_KERNEL_BASE) endif ifdef BOARD_KERNEL_PAGESIZE INTERNAL_BOOTIMAGE_ARGS += --pagesize $(BOARD_KERNEL_PAGESIZE) endif ifeq ($(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VERITY),true) ifeq ($(BOARD_BUILD_SYSTEM_ROOT_IMAGE),true) VERITY_KEYID := veritykeyid=id:`openssl x509 -in $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VERITY_SIGNING_KEY).x509.pem -text \ | grep keyid | sed 's/://g' | tr -d '[:space:]' | tr '[:upper:]' '[:lower:]' | sed 's/keyid//g'` endif endif INTERNAL_KERNEL_CMDLINE := $(strip $(BOARD_KERNEL_CMDLINE) buildvariant=$(TARGET_BUILD_VARIANT) $(VERITY_KEYID)) ifdef INTERNAL_KERNEL_CMDLINE INTERNAL_BOOTIMAGE_ARGS += --cmdline "$(INTERNAL_KERNEL_CMDLINE)" endif INTERNAL_MKBOOTIMG_VERSION_ARGS := \ --os_version $(PLATFORM_VERSION) \ --os_patch_level $(PLATFORM_SECURITY_PATCH) # BOARD_USES_RECOVERY_AS_BOOT = true must have BOARD_BUILD_SYSTEM_ROOT_IMAGE = true. ifeq ($(BOARD_USES_RECOVERY_AS_BOOT),true) ifneq ($(BOARD_BUILD_SYSTEM_ROOT_IMAGE),true) $(error BOARD_BUILD_SYSTEM_ROOT_IMAGE must be enabled for BOARD_USES_RECOVERY_AS_BOOT.) endif endif # We build recovery as boot image if BOARD_USES_RECOVERY_AS_BOOT is true. ifneq ($(BOARD_USES_RECOVERY_AS_BOOT),true) ifeq ($(TARGET_BOOTIMAGE_USE_EXT2),true) $(error TARGET_BOOTIMAGE_USE_EXT2 is not supported anymore) else ifeq (true,$(BOARD_AVB_ENABLE)) # TARGET_BOOTIMAGE_USE_EXT2 != true $(INSTALLED_BOOTIMAGE_TARGET): $(MKBOOTIMG) $(AVBTOOL) $(INTERNAL_BOOTIMAGE_FILES) $(BOARD_AVB_BOOT_KEY_PATH) $(call pretty,"Target boot image: $@") $(hide) $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_ARGS) $(INTERNAL_MKBOOTIMG_VERSION_ARGS) $(BOARD_MKBOOTIMG_ARGS) --output $@ $(hide) $(call assert-max-image-size,$@,$(call get-hash-image-max-size,$(BOARD_BOOTIMAGE_PARTITION_SIZE))) $(hide) $(AVBTOOL) add_hash_footer \ --image $@ \ --partition_size $(BOARD_BOOTIMAGE_PARTITION_SIZE) \ --partition_name boot $(INTERNAL_AVB_BOOT_SIGNING_ARGS) \ $(BOARD_AVB_BOOT_ADD_HASH_FOOTER_ARGS) .PHONY: bootimage-nodeps bootimage-nodeps: $(MKBOOTIMG) $(AVBTOOL) $(BOARD_AVB_BOOT_KEY_PATH) @echo "make $@: ignoring dependencies" $(hide) $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_ARGS) $(INTERNAL_MKBOOTIMG_VERSION_ARGS) $(BOARD_MKBOOTIMG_ARGS) --output $(INSTALLED_BOOTIMAGE_TARGET) $(hide) $(call assert-max-image-size,$(INSTALLED_BOOTIMAGE_TARGET),$(call get-hash-image-max-size,$(BOARD_BOOTIMAGE_PARTITION_SIZE))) $(hide) $(AVBTOOL) add_hash_footer \ --image $(INSTALLED_BOOTIMAGE_TARGET) \ --partition_size $(BOARD_BOOTIMAGE_PARTITION_SIZE) \ --partition_name boot $(INTERNAL_AVB_BOOT_SIGNING_ARGS) \ $(BOARD_AVB_BOOT_ADD_HASH_FOOTER_ARGS) else ifeq (true,$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_BOOT_SIGNER)) # BOARD_AVB_ENABLE != true $(INSTALLED_BOOTIMAGE_TARGET): $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_FILES) $(BOOT_SIGNER) $(call pretty,"Target boot image: $@") $(hide) $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_ARGS) $(INTERNAL_MKBOOTIMG_VERSION_ARGS) $(BOARD_MKBOOTIMG_ARGS) --output $@ $(BOOT_SIGNER) /boot $@ $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VERITY_SIGNING_KEY).pk8 $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VERITY_SIGNING_KEY).x509.pem $@ $(hide) $(call assert-max-image-size,$@,$(BOARD_BOOTIMAGE_PARTITION_SIZE)) .PHONY: bootimage-nodeps bootimage-nodeps: $(MKBOOTIMG) $(BOOT_SIGNER) @echo "make $@: ignoring dependencies" $(hide) $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_ARGS) $(INTERNAL_MKBOOTIMG_VERSION_ARGS) $(BOARD_MKBOOTIMG_ARGS) --output $(INSTALLED_BOOTIMAGE_TARGET) $(BOOT_SIGNER) /boot $(INSTALLED_BOOTIMAGE_TARGET) $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VERITY_SIGNING_KEY).pk8 $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VERITY_SIGNING_KEY).x509.pem $(INSTALLED_BOOTIMAGE_TARGET) $(hide) $(call assert-max-image-size,$(INSTALLED_BOOTIMAGE_TARGET),$(BOARD_BOOTIMAGE_PARTITION_SIZE)) else ifeq (true,$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VBOOT)) # PRODUCT_SUPPORTS_BOOT_SIGNER != true $(INSTALLED_BOOTIMAGE_TARGET): $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_FILES) $(VBOOT_SIGNER) $(FUTILITY) $(call pretty,"Target boot image: $@") $(hide) $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_ARGS) $(INTERNAL_MKBOOTIMG_VERSION_ARGS) $(BOARD_MKBOOTIMG_ARGS) --output $@.unsigned $(VBOOT_SIGNER) $(FUTILITY) $@.unsigned $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VBOOT_SIGNING_KEY).vbpubk $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VBOOT_SIGNING_KEY).vbprivk $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VBOOT_SIGNING_SUBKEY).vbprivk $@.keyblock $@ $(hide) $(call assert-max-image-size,$@,$(BOARD_BOOTIMAGE_PARTITION_SIZE)) .PHONY: bootimage-nodeps bootimage-nodeps: $(MKBOOTIMG) $(VBOOT_SIGNER) $(FUTILITY) @echo "make $@: ignoring dependencies" $(hide) $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_ARGS) $(INTERNAL_MKBOOTIMG_VERSION_ARGS) $(BOARD_MKBOOTIMG_ARGS) --output $(INSTALLED_BOOTIMAGE_TARGET).unsigned $(VBOOT_SIGNER) $(FUTILITY) $(INSTALLED_BOOTIMAGE_TARGET).unsigned $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VBOOT_SIGNING_KEY).vbpubk $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VBOOT_SIGNING_KEY).vbprivk $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VBOOT_SIGNING_SUBKEY).vbprivk $(INSTALLED_BOOTIMAGE_TARGET).keyblock $(INSTALLED_BOOTIMAGE_TARGET) $(hide) $(call assert-max-image-size,$(INSTALLED_BOOTIMAGE_TARGET),$(BOARD_BOOTIMAGE_PARTITION_SIZE)) else # PRODUCT_SUPPORTS_VBOOT != true $(INSTALLED_BOOTIMAGE_TARGET): $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_FILES) $(call pretty,"Target boot image: $@") $(hide) $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_ARGS) $(INTERNAL_MKBOOTIMG_VERSION_ARGS) $(BOARD_MKBOOTIMG_ARGS) --output $@ $(hide) $(call assert-max-image-size,$@,$(BOARD_BOOTIMAGE_PARTITION_SIZE)) .PHONY: bootimage-nodeps bootimage-nodeps: $(MKBOOTIMG) @echo "make $@: ignoring dependencies" $(hide) $(MKBOOTIMG) $(INTERNAL_BOOTIMAGE_ARGS) $(INTERNAL_MKBOOTIMG_VERSION_ARGS) $(BOARD_MKBOOTIMG_ARGS) --output $(INSTALLED_BOOTIMAGE_TARGET) $(hide) $(call assert-max-image-size,$(INSTALLED_BOOTIMAGE_TARGET),$(BOARD_BOOTIMAGE_PARTITION_SIZE)) endif # TARGET_BOOTIMAGE_USE_EXT2 endif # BOARD_USES_RECOVERY_AS_BOOT else # TARGET_NO_KERNEL ifdef BOARD_PREBUILT_BOOTIMAGE ifneq ($(BOARD_BUILD_SYSTEM_ROOT_IMAGE),true) # Remove when b/63676296 is resolved. $(error Prebuilt bootimage is only supported for AB targets) endif $(eval $(call copy-one-file,$(BOARD_PREBUILT_BOOTIMAGE),$(INSTALLED_BOOTIMAGE_TARGET))) else INTERNAL_KERNEL_CMDLINE := $(strip $(BOARD_KERNEL_CMDLINE)) # HACK: The top-level targets depend on the bootimage. Not all targets # can produce a bootimage, though, and emulator targets need the ramdisk # instead. Fake it out by calling the ramdisk the bootimage. # TODO: make the emulator use bootimages, and make mkbootimg accept # kernel-less inputs. INSTALLED_BOOTIMAGE_TARGET := $(INSTALLED_RAMDISK_TARGET) endif endif # ----------------------------------------------------------------- # NOTICE files # # We are required to publish the licenses for all code under BSD, GPL and # Apache licenses (and possibly other more exotic ones as well). We err on the # side of caution, so the licenses for other third-party code are included here # too. # # This needs to be before the systemimage rules, because it adds to # ALL_DEFAULT_INSTALLED_MODULES, which those use to pick which files # go into the systemimage. .PHONY: notice_files # Create the rule to combine the files into text and html/xml forms # $(1) - xml_excluded_vendor|xml_vendor|html # $(2) - Plain text output file # $(3) - HTML/XML output file # $(4) - File title # $(5) - Directory to use. Notice files are all $(4)/src. Other # directories in there will be used for scratch # $(6) - Dependencies for the output files # # The algorithm here is that we go collect a hash for each of the notice # files and write the names of the files that match that hash. Then # to generate the real files, we go print out all of the files and their # hashes. # # These rules are fairly complex, so they depend on this makefile so if # it changes, they'll run again. # # TODO: We could clean this up so that we just record the locations of the # original notice files instead of making rules to copy them somwehere. # Then we could traverse that without quite as much bash drama. define combine-notice-files $(2) $(3): PRIVATE_MESSAGE := $(4) $(2) $(3): PRIVATE_DIR := $(5) $(2) : $(3) $(3) : $(6) $(BUILD_SYSTEM)/Makefile build/make/tools/generate-notice-files.py build/make/tools/generate-notice-files.py --text-output $(2) \ $(if $(filter $(1),xml_excluded_vendor),-e vendor --xml-output, \ $(if $(filter $(1),xml_vendor),-i vendor --xml-output, \ --html-output)) $(3) \ -t $$(PRIVATE_MESSAGE) -s $$(PRIVATE_DIR)/src notice_files: $(2) $(3) endef # TODO These intermediate NOTICE.txt/NOTICE.html files should go into # TARGET_OUT_NOTICE_FILES now that the notice files are gathered from # the src subdirectory. target_notice_file_txt := $(TARGET_OUT_INTERMEDIATES)/NOTICE.txt target_notice_file_html_or_xml := $(TARGET_OUT_INTERMEDIATES)/NOTICE.html target_notice_file_html_or_xml_gz := $(TARGET_OUT_INTERMEDIATES)/NOTICE.html.gz installed_notice_html_or_xml_gz := $(TARGET_OUT)/etc/NOTICE.html.gz tools_notice_file_txt := $(HOST_OUT_INTERMEDIATES)/NOTICE.txt tools_notice_file_html := $(HOST_OUT_INTERMEDIATES)/NOTICE.html # TODO(b/69865032): Make PRODUCT_NOTICE_SPLIT the default behavior. ifeq ($(PRODUCT_NOTICE_SPLIT),true) target_notice_file_html_or_xml := $(TARGET_OUT_INTERMEDIATES)/NOTICE.xml target_notice_file_html_or_xml_gz := $(TARGET_OUT_INTERMEDIATES)/NOTICE.xml.gz installed_notice_html_or_xml_gz := $(TARGET_OUT)/etc/NOTICE.xml.gz target_vendor_notice_file_txt := $(TARGET_OUT_INTERMEDIATES)/NOTICE_VENDOR.txt target_vendor_notice_file_xml := $(TARGET_OUT_INTERMEDIATES)/NOTICE_VENDOR.xml target_vendor_notice_file_xml_gz := $(TARGET_OUT_INTERMEDIATES)/NOTICE_VENDOR.xml.gz installed_vendor_notice_xml_gz := $(TARGET_OUT_VENDOR)/etc/NOTICE.xml.gz endif ifndef TARGET_BUILD_APPS kernel_notice_file := $(TARGET_OUT_NOTICE_FILES)/src/kernel.txt winpthreads_notice_file := $(TARGET_OUT_NOTICE_FILES)/src/winpthreads.txt pdk_fusion_notice_files := $(filter $(TARGET_OUT_NOTICE_FILES)/%, $(ALL_PDK_FUSION_FILES)) ifdef target_vendor_notice_file_xml_gz $(eval $(call combine-notice-files, xml_excluded_vendor, \ $(target_notice_file_txt), \ $(target_notice_file_html_or_xml), \ "Notices for files contained in the filesystem images in this directory:", \ $(TARGET_OUT_NOTICE_FILES), \ $(ALL_DEFAULT_INSTALLED_MODULES) $(kernel_notice_file) $(pdk_fusion_notice_files))) $(eval $(call combine-notice-files, xml_vendor, \ $(target_vendor_notice_file_txt), \ $(target_vendor_notice_file_xml), \ "Notices for files contained in the vendor filesystem image in this directory:", \ $(TARGET_OUT_NOTICE_FILES), \ $(target_notice_file_html_or_xml))) else $(eval $(call combine-notice-files, html, \ $(target_notice_file_txt), \ $(target_notice_file_html_or_xml), \ "Notices for files contained in the filesystem images in this directory:", \ $(TARGET_OUT_NOTICE_FILES), \ $(ALL_DEFAULT_INSTALLED_MODULES) $(kernel_notice_file) $(pdk_fusion_notice_files))) endif $(eval $(call combine-notice-files, html, \ $(tools_notice_file_txt), \ $(tools_notice_file_html), \ "Notices for files contained in the tools directory:", \ $(HOST_OUT_NOTICE_FILES), \ $(ALL_DEFAULT_INSTALLED_MODULES) \ $(winpthreads_notice_file))) # Install the html file at /system/etc/NOTICE.html.gz. # This is not ideal, but this is very late in the game, after a lot of # the module processing has already been done -- in fact, we used the # fact that all that has been done to get the list of modules that we # need notice files for. $(target_notice_file_html_or_xml_gz): $(target_notice_file_html_or_xml) | $(MINIGZIP) $(hide) $(MINIGZIP) -9 < $< > $@ $(installed_notice_html_or_xml_gz): $(target_notice_file_html_or_xml_gz) $(copy-file-to-target) ifdef target_vendor_notice_file_xml_gz # Install the vendor html file at /vendor/etc/NOTICE.xml.gz. $(target_vendor_notice_file_xml_gz): $(target_vendor_notice_file_xml) | $(MINIGZIP) $(hide) $(MINIGZIP) -9 < $< > $@ $(installed_vendor_notice_xml_gz): $(target_vendor_notice_file_xml_gz) $(copy-file-to-target) endif # if we've been run my mm, mmm, etc, don't reinstall this every time ifeq ($(ONE_SHOT_MAKEFILE),) ALL_DEFAULT_INSTALLED_MODULES += $(installed_notice_html_or_xml_gz) ifdef target_vendor_notice_file_xml_gz ALL_DEFAULT_INSTALLED_MODULES += $(installed_vendor_notice_xml_gz) endif endif endif # TARGET_BUILD_APPS # The kernel isn't really a module, so to get its module file in there, we # make the target NOTICE files depend on this particular file too, which will # then be in the right directory for the find in combine-notice-files to work. $(kernel_notice_file): \ $(BUILD_SYSTEM)/LINUX_KERNEL_COPYING \ | $(ACP) @echo Copying: $@ $(hide) mkdir -p $(dir $@) $(hide) $(ACP) $< $@ $(winpthreads_notice_file): \ $(BUILD_SYSTEM)/WINPTHREADS_COPYING \ | $(ACP) @echo Copying: $@ $(hide) mkdir -p $(dir $@) $(hide) $(ACP) $< $@ # ----------------------------------------------------------------- # Build a keystore with the authorized keys in it, used to verify the # authenticity of downloaded OTA packages. # # This rule adds to ALL_DEFAULT_INSTALLED_MODULES, so it needs to come # before the rules that use that variable to build the image. ALL_DEFAULT_INSTALLED_MODULES += $(TARGET_OUT_ETC)/security/otacerts.zip $(TARGET_OUT_ETC)/security/otacerts.zip: KEY_CERT_PAIR := $(DEFAULT_KEY_CERT_PAIR) $(TARGET_OUT_ETC)/security/otacerts.zip: $(addsuffix .x509.pem,$(DEFAULT_KEY_CERT_PAIR)) | $(ZIPTIME) $(hide) rm -f $@ $(hide) mkdir -p $(dir $@) $(hide) zip -qjX $@ $< $(remove-timestamps-from-package) # Carry the public key for update_engine if it's a non-IoT target that # uses the AB updater. We use the same key as otacerts but in RSA public key # format. ifeq ($(AB_OTA_UPDATER),true) ifneq ($(PRODUCT_IOT),true) ALL_DEFAULT_INSTALLED_MODULES += $(TARGET_OUT_ETC)/update_engine/update-payload-key.pub.pem $(TARGET_OUT_ETC)/update_engine/update-payload-key.pub.pem: $(addsuffix .x509.pem,$(DEFAULT_KEY_CERT_PAIR)) $(hide) rm -f $@ $(hide) mkdir -p $(dir $@) $(hide) openssl x509 -pubkey -noout -in $< > $@ ALL_DEFAULT_INSTALLED_MODULES += $(TARGET_RECOVERY_ROOT_OUT)/etc/update_engine/update-payload-key.pub.pem $(TARGET_RECOVERY_ROOT_OUT)/etc/update_engine/update-payload-key.pub.pem: $(TARGET_OUT_ETC)/update_engine/update-payload-key.pub.pem $(hide) cp -f $< $@ endif endif .PHONY: otacerts otacerts: $(TARGET_OUT_ETC)/security/otacerts.zip # ################################################################# # Targets for user images # ################################################################# INTERNAL_USERIMAGES_EXT_VARIANT := ifeq ($(TARGET_USERIMAGES_USE_EXT2),true) INTERNAL_USERIMAGES_USE_EXT := true INTERNAL_USERIMAGES_EXT_VARIANT := ext2 else ifeq ($(TARGET_USERIMAGES_USE_EXT3),true) INTERNAL_USERIMAGES_USE_EXT := true INTERNAL_USERIMAGES_EXT_VARIANT := ext3 else ifeq ($(TARGET_USERIMAGES_USE_EXT4),true) INTERNAL_USERIMAGES_USE_EXT := true INTERNAL_USERIMAGES_EXT_VARIANT := ext4 endif endif endif # These options tell the recovery updater/installer how to mount the partitions writebale. # =[|]... # fstype_opts := [,]... # opt := [=] # The following worked on Nexus devices with Kernel 3.1, 3.4, 3.10 DEFAULT_TARGET_RECOVERY_FSTYPE_MOUNT_OPTIONS := ext4=max_batch_time=0,commit=1,data=ordered,barrier=1,errors=panic,nodelalloc ifneq (true,$(TARGET_USERIMAGES_SPARSE_EXT_DISABLED)) INTERNAL_USERIMAGES_SPARSE_EXT_FLAG := -s endif ifeq ($(INTERNAL_USERIMAGES_USE_EXT),true) INTERNAL_USERIMAGES_DEPS := $(SIMG2IMG) INTERNAL_USERIMAGES_DEPS += $(MKEXTUSERIMG) $(MAKE_EXT4FS) $(E2FSCK) ifeq ($(TARGET_USERIMAGES_USE_F2FS),true) INTERNAL_USERIMAGES_DEPS += $(MKF2FSUSERIMG) $(MAKE_F2FS) endif endif ifeq ($(BOARD_AVB_ENABLE),true) INTERNAL_USERIMAGES_DEPS += $(AVBTOOL) endif ifneq (true,$(TARGET_USERIMAGES_SPARSE_SQUASHFS_DISABLED)) INTERNAL_USERIMAGES_SPARSE_SQUASHFS_FLAG := -s endif ifneq ($(filter $(BOARD_PRODUCTIMAGE_FILE_SYSTEM_TYPE) $(BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE) $(BOARD_SYSTEMIMAGE_FILE_SYSTEM_TYPE),squashfs),) INTERNAL_USERIMAGES_DEPS += $(MAKE_SQUASHFS) $(MKSQUASHFSUSERIMG) $(IMG2SIMG) endif INTERNAL_USERIMAGES_BINARY_PATHS := $(sort $(dir $(INTERNAL_USERIMAGES_DEPS))) ifeq (true,$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VERITY)) INTERNAL_USERIMAGES_DEPS += $(BUILD_VERITY_TREE) $(APPEND2SIMG) $(VERITY_SIGNER) ifeq (true,$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VERITY_FEC)) INTERNAL_USERIMAGES_DEPS += $(FEC) endif endif SELINUX_FC := $(call intermediates-dir-for,ETC,file_contexts.bin)/file_contexts.bin INTERNAL_USERIMAGES_DEPS += $(SELINUX_FC) INTERNAL_USERIMAGES_DEPS += $(BLK_ALLOC_TO_BASE_FS) ifeq ($(INTERNAL_USERIMAGES_USE_EXT),true) INTERNAL_USERIMAGES_DEPS += $(MKE2FS_CONF) endif # $(1): the path of the output dictionary file # $(2): additional "key=value" pairs to append to the dictionary file. define generate-userimage-prop-dictionary $(hide) echo "ext_mkuserimg=$(notdir $(MKEXTUSERIMG))" >> $(1) $(if $(INTERNAL_USERIMAGES_EXT_VARIANT),$(hide) echo "fs_type=$(INTERNAL_USERIMAGES_EXT_VARIANT)" >> $(1)) $(if $(BOARD_SYSTEMIMAGE_PARTITION_SIZE),$(hide) echo "system_size=$(BOARD_SYSTEMIMAGE_PARTITION_SIZE)" >> $(1)) $(if $(BOARD_SYSTEMIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "system_fs_type=$(BOARD_SYSTEMIMAGE_FILE_SYSTEM_TYPE)" >> $(1)) $(if $(BOARD_SYSTEMIMAGE_EXTFS_INODE_COUNT),$(hide) echo "system_extfs_inode_count=$(BOARD_SYSTEMIMAGE_EXTFS_INODE_COUNT)" >> $(1)) $(if $(BOARD_SYSTEMIMAGE_JOURNAL_SIZE),$(hide) echo "system_journal_size=$(BOARD_SYSTEMIMAGE_JOURNAL_SIZE)" >> $(1)) $(if $(BOARD_EXT4_SHARE_DUP_BLOCKS),$(hide) echo "ext4_share_dup_blocks=$(BOARD_EXT4_SHARE_DUP_BLOCKS)" >> $(1)) $(if $(BOARD_SYSTEMIMAGE_SQUASHFS_COMPRESSOR),$(hide) echo "system_squashfs_compressor=$(BOARD_SYSTEMIMAGE_SQUASHFS_COMPRESSOR)" >> $(1)) $(if $(BOARD_SYSTEMIMAGE_SQUASHFS_COMPRESSOR_OPT),$(hide) echo "system_squashfs_compressor_opt=$(BOARD_SYSTEMIMAGE_SQUASHFS_COMPRESSOR_OPT)" >> $(1)) $(if $(BOARD_SYSTEMIMAGE_SQUASHFS_BLOCK_SIZE),$(hide) echo "system_squashfs_block_size=$(BOARD_SYSTEMIMAGE_SQUASHFS_BLOCK_SIZE)" >> $(1)) $(if $(BOARD_SYSTEMIMAGE_SQUASHFS_DISABLE_4K_ALIGN),$(hide) echo "system_squashfs_disable_4k_align=$(BOARD_SYSTEMIMAGE_SQUASHFS_DISABLE_4K_ALIGN)" >> $(1)) $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SYSTEM_BASE_FS_PATH),$(hide) echo "system_base_fs_file=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SYSTEM_BASE_FS_PATH)" >> $(1)) $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SYSTEM_HEADROOM),$(hide) echo "system_headroom=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SYSTEM_HEADROOM)" >> $(1)) $(if $(BOARD_USERDATAIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "userdata_fs_type=$(BOARD_USERDATAIMAGE_FILE_SYSTEM_TYPE)" >> $(1)) $(if $(BOARD_USERDATAIMAGE_PARTITION_SIZE),$(hide) echo "userdata_size=$(BOARD_USERDATAIMAGE_PARTITION_SIZE)" >> $(1)) $(if $(BOARD_FLASH_LOGICAL_BLOCK_SIZE), $(hide) echo "flash_logical_block_size=$(BOARD_FLASH_LOGICAL_BLOCK_SIZE)" >> $(1)) $(if $(BOARD_FLASH_ERASE_BLOCK_SIZE), $(hide) echo "flash_erase_block_size=$(BOARD_FLASH_ERASE_BLOCK_SIZE)" >> $(1)) $(if $(BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "cache_fs_type=$(BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE)" >> $(1)) $(if $(BOARD_CACHEIMAGE_PARTITION_SIZE),$(hide) echo "cache_size=$(BOARD_CACHEIMAGE_PARTITION_SIZE)" >> $(1)) $(if $(BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "vendor_fs_type=$(BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE)" >> $(1)) $(if $(BOARD_VENDORIMAGE_EXTFS_INODE_COUNT),$(hide) echo "vendor_extfs_inode_count=$(BOARD_VENDORIMAGE_EXTFS_INODE_COUNT)" >> $(1)) $(if $(BOARD_VENDORIMAGE_PARTITION_SIZE),$(hide) echo "vendor_size=$(BOARD_VENDORIMAGE_PARTITION_SIZE)" >> $(1)) $(if $(BOARD_VENDORIMAGE_JOURNAL_SIZE),$(hide) echo "vendor_journal_size=$(BOARD_VENDORIMAGE_JOURNAL_SIZE)" >> $(1)) $(if $(BOARD_VENDORIMAGE_SQUASHFS_COMPRESSOR),$(hide) echo "vendor_squashfs_compressor=$(BOARD_VENDORIMAGE_SQUASHFS_COMPRESSOR)" >> $(1)) $(if $(BOARD_VENDORIMAGE_SQUASHFS_COMPRESSOR_OPT),$(hide) echo "vendor_squashfs_compressor_opt=$(BOARD_VENDORIMAGE_SQUASHFS_COMPRESSOR_OPT)" >> $(1)) $(if $(BOARD_VENDORIMAGE_SQUASHFS_BLOCK_SIZE),$(hide) echo "vendor_squashfs_block_size=$(BOARD_VENDORIMAGE_SQUASHFS_BLOCK_SIZE)" >> $(1)) $(if $(BOARD_VENDORIMAGE_SQUASHFS_DISABLE_4K_ALIGN),$(hide) echo "vendor_squashfs_disable_4k_align=$(BOARD_VENDORIMAGE_SQUASHFS_DISABLE_4K_ALIGN)" >> $(1)) $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VENDOR_BASE_FS_PATH),$(hide) echo "vendor_base_fs_file=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VENDOR_BASE_FS_PATH)" >> $(1)) $(if $(BOARD_PRODUCTIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "product_fs_type=$(BOARD_PRODUCTIMAGE_FILE_SYSTEM_TYPE)" >> $(1)) $(if $(BOARD_PRODUCTIMAGE_EXTFS_INODE_COUNT),$(hide) echo "product_extfs_inode_count=$(BOARD_PRODUCTIMAGE_EXTFS_INODE_COUNT)" >> $(1)) $(if $(BOARD_PRODUCTIMAGE_PARTITION_SIZE),$(hide) echo "product_size=$(BOARD_PRODUCTIMAGE_PARTITION_SIZE)" >> $(1)) $(if $(BOARD_PRODUCTIMAGE_JOURNAL_SIZE),$(hide) echo "product_journal_size=$(BOARD_PRODUCTIMAGE_JOURNAL_SIZE)" >> $(1)) $(if $(BOARD_PRODUCTIMAGE_SQUASHFS_COMPRESSOR),$(hide) echo "product_squashfs_compressor=$(BOARD_PRODUCTIMAGE_SQUASHFS_COMPRESSOR)" >> $(1)) $(if $(BOARD_PRODUCTIMAGE_SQUASHFS_COMPRESSOR_OPT),$(hide) echo "product_squashfs_compressor_opt=$(BOARD_PRODUCTIMAGE_SQUASHFS_COMPRESSOR_OPT)" >> $(1)) $(if $(BOARD_PRODUCTIMAGE_SQUASHFS_BLOCK_SIZE),$(hide) echo "product_squashfs_block_size=$(BOARD_PRODUCTIMAGE_SQUASHFS_BLOCK_SIZE)" >> $(1)) $(if $(BOARD_PRODUCTIMAGE_SQUASHFS_DISABLE_4K_ALIGN),$(hide) echo "product_squashfs_disable_4k_align=$(BOARD_PRODUCTIMAGE_SQUASHFS_DISABLE_4K_ALIGN)" >> $(1)) $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PRODUCT_BASE_FS_PATH),$(hide) echo "product_base_fs_file=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PRODUCT_BASE_FS_PATH)" >> $(1)) $(if $(BOARD_OEMIMAGE_PARTITION_SIZE),$(hide) echo "oem_size=$(BOARD_OEMIMAGE_PARTITION_SIZE)" >> $(1)) $(if $(BOARD_OEMIMAGE_JOURNAL_SIZE),$(hide) echo "oem_journal_size=$(BOARD_OEMIMAGE_JOURNAL_SIZE)" >> $(1)) $(if $(BOARD_OEMIMAGE_EXTFS_INODE_COUNT),$(hide) echo "oem_extfs_inode_count=$(BOARD_OEMIMAGE_EXTFS_INODE_COUNT)" >> $(1)) $(if $(INTERNAL_USERIMAGES_SPARSE_EXT_FLAG),$(hide) echo "extfs_sparse_flag=$(INTERNAL_USERIMAGES_SPARSE_EXT_FLAG)" >> $(1)) $(if $(INTERNAL_USERIMAGES_SPARSE_SQUASHFS_FLAG),$(hide) echo "squashfs_sparse_flag=$(INTERNAL_USERIMAGES_SPARSE_SQUASHFS_FLAG)" >> $(1)) $(hide) echo "selinux_fc=$(SELINUX_FC)" >> $(1) $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_BOOT_SIGNER),$(hide) echo "boot_signer=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_BOOT_SIGNER)" >> $(1)) $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VERITY),$(hide) echo "verity=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VERITY)" >> $(1)) $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VERITY),$(hide) echo "verity_key=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VERITY_SIGNING_KEY)" >> $(1)) $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VERITY),$(hide) echo "verity_signer_cmd=$(notdir $(VERITY_SIGNER))" >> $(1)) $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VERITY_FEC),$(hide) echo "verity_fec=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VERITY_FEC)" >> $(1)) $(if $(filter eng, $(TARGET_BUILD_VARIANT)),$(hide) echo "verity_disable=true" >> $(1)) $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SYSTEM_VERITY_PARTITION),$(hide) echo "system_verity_block_device=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SYSTEM_VERITY_PARTITION)" >> $(1)) $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VENDOR_VERITY_PARTITION),$(hide) echo "vendor_verity_block_device=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VENDOR_VERITY_PARTITION)" >> $(1)) $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PRODUCT_VERITY_PARTITION),$(hide) echo "product_verity_block_device=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PRODUCT_VERITY_PARTITION)" >> $(1)) $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VBOOT),$(hide) echo "vboot=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VBOOT)" >> $(1)) $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VBOOT),$(hide) echo "vboot_key=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VBOOT_SIGNING_KEY)" >> $(1)) $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VBOOT),$(hide) echo "vboot_subkey=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VBOOT_SIGNING_SUBKEY)" >> $(1)) $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VBOOT),$(hide) echo "futility=$(notdir $(FUTILITY))" >> $(1)) $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VBOOT),$(hide) echo "vboot_signer_cmd=$(VBOOT_SIGNER)" >> $(1)) $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_avbtool=$(notdir $(AVBTOOL))" >> $(1)) $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_system_hashtree_enable=$(BOARD_AVB_ENABLE)" >> $(1)) $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_system_add_hashtree_footer_args=$(BOARD_AVB_SYSTEM_ADD_HASHTREE_FOOTER_ARGS)" >> $(1)) $(if $(BOARD_AVB_ENABLE),\ $(if $(BOARD_AVB_SYSTEM_KEY_PATH),\ $(hide) echo "avb_system_key_path=$(BOARD_AVB_SYSTEM_KEY_PATH)" >> $(1) $(hide) echo "avb_system_algorithm=$(BOARD_AVB_SYSTEM_ALGORITHM)" >> $(1) $(hide) echo "avb_system_rollback_index_location=$(BOARD_AVB_SYSTEM_ROLLBACK_INDEX_LOCATION)" >> $(1))) $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_vendor_hashtree_enable=$(BOARD_AVB_ENABLE)" >> $(1)) $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_vendor_add_hashtree_footer_args=$(BOARD_AVB_VENDOR_ADD_HASHTREE_FOOTER_ARGS)" >> $(1)) $(if $(BOARD_AVB_ENABLE),\ $(if $(BOARD_AVB_VENDOR_KEY_PATH),\ $(hide) echo "avb_vendor_key_path=$(BOARD_AVB_VENDOR_KEY_PATH)" >> $(1) $(hide) echo "avb_vendor_algorithm=$(BOARD_AVB_VENDOR_ALGORITHM)" >> $(1) $(hide) echo "avb_vendor_rollback_index_location=$(BOARD_AVB_VENDOR_ROLLBACK_INDEX_LOCATION)" >> $(1))) $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_product_hashtree_enable=$(BOARD_AVB_ENABLE)" >> $(1)) $(if $(BOARD_AVB_ENABLE),$(hide) echo "avb_product_add_hashtree_footer_args=$(BOARD_AVB_PRODUCT_ADD_HASHTREE_FOOTER_ARGS)" >> $(1)) $(if $(BOARD_AVB_ENABLE),\ $(if $(BOARD_AVB_PRODUCT_KEY_PATH),\ $(hide) echo "avb_product_key_path=$(BOARD_AVB_PRODUCT_KEY_PATH)" >> $(1) $(hide) echo "avb_product_algorithm=$(BOARD_AVB_PRODUCT_ALGORITHM)" >> $(1) $(hide) echo "avb_product_rollback_index_location=$(BOARD_AVB_PRODUCT_ROLLBACK_INDEX_LOCATION)" >> $(1))) $(if $(filter true,$(BOARD_USES_RECOVERY_AS_BOOT)),\ $(hide) echo "recovery_as_boot=true" >> $(1)) $(if $(filter true,$(BOARD_BUILD_SYSTEM_ROOT_IMAGE)),\ $(hide) echo "system_root_image=true" >> $(1);\ echo "ramdisk_dir=$(TARGET_ROOT_OUT)" >> $(1)) $(if $(2),$(hide) $(foreach kv,$(2),echo "$(kv)" >> $(1);)) endef # $(1): modules list # $(2): output dir # $(3): mount point # $(4): staging dir # Depmod requires a well-formed kernel version so 0.0 is used as a placeholder. define build-image-kernel-modules $(hide) rm -rf $(2)/lib/modules $(hide) mkdir -p $(2)/lib/modules $(hide) cp $(1) $(2)/lib/modules/ $(hide) rm -rf $(4) $(hide) mkdir -p $(4)/lib/modules/0.0/$(3)lib/modules $(hide) cp $(1) $(4)/lib/modules/0.0/$(3)lib/modules $(hide) $(DEPMOD) -b $(4) 0.0 $(hide) sed -e 's/\(.*modules.*\):/\/\1:/g' -e 's/ \([^ ]*modules[^ ]*\)/ \/\1/g' $(4)/lib/modules/0.0/modules.dep > $(2)/lib/modules/modules.dep $(hide) cp $(4)/lib/modules/0.0/modules.alias $(2)/lib/modules endef # ----------------------------------------------------------------- # Recovery image # Recovery image exists if we are building recovery, or building recovery as boot. ifneq (,$(INSTALLED_RECOVERYIMAGE_TARGET)$(filter true,$(BOARD_USES_RECOVERY_AS_BOOT))) INTERNAL_RECOVERYIMAGE_FILES := $(filter $(TARGET_RECOVERY_OUT)/%, \ $(ALL_DEFAULT_INSTALLED_MODULES)) recovery_initrc := $(call include-path-for, recovery)/etc/init.rc recovery_sepolicy := \ $(TARGET_RECOVERY_ROOT_OUT)/sepolicy \ $(TARGET_RECOVERY_ROOT_OUT)/plat_file_contexts \ $(TARGET_RECOVERY_ROOT_OUT)/vendor_file_contexts \ $(TARGET_RECOVERY_ROOT_OUT)/plat_property_contexts \ $(TARGET_RECOVERY_ROOT_OUT)/vendor_property_contexts # Passed into rsync from non-recovery root to recovery root, to avoid overwriting recovery-specific # SELinux files IGNORE_RECOVERY_SEPOLICY := $(patsubst $(TARGET_RECOVERY_OUT)/%,--exclude=/%,$(recovery_sepolicy)) recovery_kernel := $(INSTALLED_KERNEL_TARGET) # same as a non-recovery system recovery_ramdisk := $(PRODUCT_OUT)/ramdisk-recovery.img recovery_build_props := $(intermediate_system_build_prop) ifdef property_overrides_split_enabled recovery_build_props += $(INSTALLED_VENDOR_BUILD_PROP_TARGET) endif ifdef BOARD_USES_PRODUCTIMAGE recovery_build_props += $(INSTALLED_PRODUCT_BUILD_PROP_TARGET) endif recovery_resources_common := $(call include-path-for, recovery)/res # Set recovery_density to the density bucket of the device. recovery_density := unknown ifneq (,$(PRODUCT_AAPT_PREF_CONFIG)) # If PRODUCT_AAPT_PREF_CONFIG includes a dpi bucket, then use that value. recovery_density := $(filter %dpi,$(PRODUCT_AAPT_PREF_CONFIG)) else # Otherwise, use the default medium density. recovery_densities := mdpi endif ifneq (,$(wildcard $(recovery_resources_common)-$(recovery_density))) recovery_resources_common := $(recovery_resources_common)-$(recovery_density) else recovery_resources_common := $(recovery_resources_common)-xhdpi endif # Select the 18x32 font on high-density devices (xhdpi and up); and # the 12x22 font on other devices. Note that the font selected here # can be overridden for a particular device by putting a font.png in # its private recovery resources. ifneq (,$(filter xxxhdpi 560dpi xxhdpi 400dpi xhdpi,$(recovery_density))) recovery_font := $(call include-path-for, recovery)/fonts/18x32.png else recovery_font := $(call include-path-for, recovery)/fonts/12x22.png endif ifndef TARGET_PRIVATE_RES_DIRS TARGET_PRIVATE_RES_DIRS := $(wildcard $(TARGET_DEVICE_DIR)/recovery/res) endif recovery_resource_deps := $(shell find $(recovery_resources_common) \ $(TARGET_PRIVATE_RES_DIRS) -type f) ifdef TARGET_RECOVERY_FSTAB recovery_fstab := $(TARGET_RECOVERY_FSTAB) else recovery_fstab := $(strip $(wildcard $(TARGET_DEVICE_DIR)/recovery.fstab)) endif ifdef TARGET_RECOVERY_WIPE recovery_wipe := $(TARGET_RECOVERY_WIPE) else recovery_wipe := endif # Prior to A/B update, we used to have: # boot.img + recovery-from-boot.p + recovery-resource.dat = recovery.img. # recovery-resource.dat is needed only if we carry a patch of the boot and # recovery images and invoke install-recovery.sh on the first boot post an # OTA update. # # We no longer need that if one of the following conditions holds: # a) We carry a full copy of the recovery image # (BOARD_USES_FULL_RECOVERY_IMAGE = true); # b) We build a single image that contains boot and recovery both # (BOARD_USES_RECOVERY_AS_BOOT = true). ifeq (,$(filter true, $(BOARD_USES_FULL_RECOVERY_IMAGE) $(BOARD_USES_RECOVERY_AS_BOOT))) # Named '.dat' so we don't attempt to use imgdiff for patching it. RECOVERY_RESOURCE_ZIP := $(TARGET_OUT)/etc/recovery-resource.dat else RECOVERY_RESOURCE_ZIP := endif INTERNAL_RECOVERYIMAGE_ARGS := \ $(addprefix --second ,$(INSTALLED_2NDBOOTLOADER_TARGET)) \ --kernel $(recovery_kernel) \ --ramdisk $(recovery_ramdisk) # Assumes this has already been stripped ifdef INTERNAL_KERNEL_CMDLINE INTERNAL_RECOVERYIMAGE_ARGS += --cmdline "$(INTERNAL_KERNEL_CMDLINE)" endif ifdef BOARD_KERNEL_BASE INTERNAL_RECOVERYIMAGE_ARGS += --base $(BOARD_KERNEL_BASE) endif ifdef BOARD_KERNEL_PAGESIZE INTERNAL_RECOVERYIMAGE_ARGS += --pagesize $(BOARD_KERNEL_PAGESIZE) endif # Keys authorized to sign OTA packages this build will accept. The # build always uses dev-keys for this; release packaging tools will # substitute other keys for this one. OTA_PUBLIC_KEYS := $(DEFAULT_SYSTEM_DEV_CERTIFICATE).x509.pem # Generate a file containing the keys that will be read by the # recovery binary. RECOVERY_INSTALL_OTA_KEYS := \ $(call intermediates-dir-for,PACKAGING,ota_keys)/keys DUMPKEY_JAR := $(HOST_OUT_JAVA_LIBRARIES)/dumpkey.jar $(RECOVERY_INSTALL_OTA_KEYS): PRIVATE_OTA_PUBLIC_KEYS := $(OTA_PUBLIC_KEYS) $(RECOVERY_INSTALL_OTA_KEYS): extra_keys := $(patsubst %,%.x509.pem,$(PRODUCT_EXTRA_RECOVERY_KEYS)) $(RECOVERY_INSTALL_OTA_KEYS): $(OTA_PUBLIC_KEYS) $(DUMPKEY_JAR) $(extra_keys) @echo "DumpPublicKey: $@ <= $(PRIVATE_OTA_PUBLIC_KEYS) $(extra_keys)" @rm -rf $@ @mkdir -p $(dir $@) $(JAVA) -jar $(DUMPKEY_JAR) $(PRIVATE_OTA_PUBLIC_KEYS) $(extra_keys) > $@ RECOVERYIMAGE_ID_FILE := $(PRODUCT_OUT)/recovery.id # $(1): output file define build-recoveryimage-target # Making recovery image $(hide) mkdir -p $(TARGET_RECOVERY_OUT) $(hide) mkdir -p $(TARGET_RECOVERY_ROOT_OUT)/etc $(TARGET_RECOVERY_ROOT_OUT)/sdcard $(TARGET_RECOVERY_ROOT_OUT)/tmp # Copying baseline ramdisk... # Use rsync because "cp -Rf" fails to overwrite broken symlinks on Mac. $(hide) rsync -a --exclude=etc --exclude=sdcard $(IGNORE_RECOVERY_SEPOLICY) $(IGNORE_CACHE_LINK) $(TARGET_ROOT_OUT) $(TARGET_RECOVERY_OUT) # Copy adbd from system/bin to recovery/root/sbin $(hide) cp -f $(TARGET_OUT_EXECUTABLES)/adbd $(TARGET_RECOVERY_ROOT_OUT)/sbin/adbd # Modifying ramdisk contents... $(if $(BOARD_RECOVERY_KERNEL_MODULES), \ $(call build-image-kernel-modules,$(BOARD_RECOVERY_KERNEL_MODULES),$(TARGET_RECOVERY_ROOT_OUT),,$(call intermediates-dir-for,PACKAGING,depmod_recovery))) # Removes $(TARGET_RECOVERY_ROOT_OUT)/init*.rc EXCEPT init.recovery*.rc. $(hide) find $(TARGET_RECOVERY_ROOT_OUT) -maxdepth 1 -name 'init*.rc' -type f -not -name "init.recovery.*.rc" | xargs rm -f $(hide) cp -f $(recovery_initrc) $(TARGET_RECOVERY_ROOT_OUT)/ $(hide) cp $(TARGET_ROOT_OUT)/init.recovery.*.rc $(TARGET_RECOVERY_ROOT_OUT)/ || true # Ignore error when the src file doesn't exist. $(hide) mkdir -p $(TARGET_RECOVERY_ROOT_OUT)/res $(hide) rm -rf $(TARGET_RECOVERY_ROOT_OUT)/res/* $(hide) cp -rf $(recovery_resources_common)/* $(TARGET_RECOVERY_ROOT_OUT)/res $(hide) cp -f $(recovery_font) $(TARGET_RECOVERY_ROOT_OUT)/res/images/font.png $(hide) $(foreach item,$(TARGET_PRIVATE_RES_DIRS), \ cp -rf $(item) $(TARGET_RECOVERY_ROOT_OUT)/$(newline)) $(hide) $(foreach item,$(recovery_fstab), \ cp -f $(item) $(TARGET_RECOVERY_ROOT_OUT)/etc/recovery.fstab) $(if $(strip $(recovery_wipe)), \ $(hide) cp -f $(recovery_wipe) $(TARGET_RECOVERY_ROOT_OUT)/etc/recovery.wipe) $(hide) cp $(RECOVERY_INSTALL_OTA_KEYS) $(TARGET_RECOVERY_ROOT_OUT)/res/keys $(hide) cat $(INSTALLED_DEFAULT_PROP_TARGET) \ > $(TARGET_RECOVERY_ROOT_OUT)/prop.default $(if $(INSTALLED_VENDOR_DEFAULT_PROP_TARGET), \ $(hide) cat $(INSTALLED_VENDOR_DEFAULT_PROP_TARGET) \ >> $(TARGET_RECOVERY_ROOT_OUT)/prop.default) $(hide) cat $(recovery_build_props) \ >> $(TARGET_RECOVERY_ROOT_OUT)/prop.default $(hide) ln -sf prop.default $(TARGET_RECOVERY_ROOT_OUT)/default.prop $(BOARD_RECOVERY_IMAGE_PREPARE) $(if $(filter true,$(BOARD_BUILD_SYSTEM_ROOT_IMAGE)), \ $(hide) mkdir -p $(TARGET_RECOVERY_ROOT_OUT)/system_root; \ rm -rf $(TARGET_RECOVERY_ROOT_OUT)/system; \ ln -sf /system_root/system $(TARGET_RECOVERY_ROOT_OUT)/system) # Mount the system_root_image to /system_root and symlink /system. $(hide) $(MKBOOTFS) -d $(TARGET_OUT) $(TARGET_RECOVERY_ROOT_OUT) | $(MINIGZIP) > $(recovery_ramdisk) $(if $(filter true,$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VBOOT)), \ $(hide) $(MKBOOTIMG) $(INTERNAL_RECOVERYIMAGE_ARGS) $(INTERNAL_MKBOOTIMG_VERSION_ARGS) $(BOARD_MKBOOTIMG_ARGS) --output $(1).unsigned, \ $(hide) $(MKBOOTIMG) $(INTERNAL_RECOVERYIMAGE_ARGS) $(INTERNAL_MKBOOTIMG_VERSION_ARGS) $(BOARD_MKBOOTIMG_ARGS) --output $(1) --id > $(RECOVERYIMAGE_ID_FILE)) $(if $(filter true,$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_BOOT_SIGNER)),\ $(if $(filter true,$(BOARD_USES_RECOVERY_AS_BOOT)),\ $(BOOT_SIGNER) /boot $(1) $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VERITY_SIGNING_KEY).pk8 $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VERITY_SIGNING_KEY).x509.pem $(1),\ $(BOOT_SIGNER) /recovery $(1) $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VERITY_SIGNING_KEY).pk8 $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VERITY_SIGNING_KEY).x509.pem $(1)\ )\ ) $(if $(filter true,$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VBOOT)), \ $(VBOOT_SIGNER) $(FUTILITY) $(1).unsigned $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VBOOT_SIGNING_KEY).vbpubk $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VBOOT_SIGNING_KEY).vbprivk $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VBOOT_SIGNING_SUBKEY).vbprivk $(1).keyblock $(1)) $(if $(filter true,$(BOARD_USES_RECOVERY_AS_BOOT)), \ $(hide) $(call assert-max-image-size,$(1),$(call get-hash-image-max-size,$(BOARD_BOOTIMAGE_PARTITION_SIZE))), \ $(hide) $(call assert-max-image-size,$(1),$(call get-hash-image-max-size,$(BOARD_RECOVERYIMAGE_PARTITION_SIZE)))) $(if $(filter true,$(BOARD_AVB_ENABLE)), \ $(if $(filter true,$(BOARD_USES_RECOVERY_AS_BOOT)), \ $(hide) $(AVBTOOL) add_hash_footer --image $(1) --partition_size $(BOARD_BOOTIMAGE_PARTITION_SIZE) --partition_name boot $(INTERNAL_AVB_BOOT_SIGNING_ARGS) $(BOARD_AVB_BOOT_ADD_HASH_FOOTER_ARGS),\ $(hide) $(AVBTOOL) add_hash_footer --image $(1) --partition_size $(BOARD_RECOVERYIMAGE_PARTITION_SIZE) --partition_name recovery $(INTERNAL_AVB_RECOVERY_SIGNING_ARGS) $(BOARD_AVB_RECOVERY_ADD_HASH_FOOTER_ARGS))) endef ADBD := $(TARGET_OUT_EXECUTABLES)/adbd ifeq ($(BOARD_USES_RECOVERY_AS_BOOT),true) ifeq (true,$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_BOOT_SIGNER)) $(INSTALLED_BOOTIMAGE_TARGET) : $(BOOT_SIGNER) endif ifeq (true,$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VBOOT)) $(INSTALLED_BOOTIMAGE_TARGET) : $(VBOOT_SIGNER) endif ifeq (true,$(BOARD_AVB_ENABLE)) $(INSTALLED_BOOTIMAGE_TARGET) : $(AVBTOOL) $(BOARD_AVB_BOOT_KEY_PATH) endif $(INSTALLED_BOOTIMAGE_TARGET): $(MKBOOTFS) $(MKBOOTIMG) $(MINIGZIP) $(ADBD) \ $(INSTALLED_RAMDISK_TARGET) \ $(INTERNAL_RECOVERYIMAGE_FILES) \ $(recovery_initrc) $(recovery_sepolicy) $(recovery_kernel) \ $(INSTALLED_2NDBOOTLOADER_TARGET) \ $(recovery_build_props) $(recovery_resource_deps) \ $(recovery_fstab) \ $(RECOVERY_INSTALL_OTA_KEYS) \ $(INSTALLED_VENDOR_DEFAULT_PROP_TARGET) \ $(BOARD_RECOVERY_KERNEL_MODULES) \ $(DEPMOD) $(call pretty,"Target boot image from recovery: $@") $(call build-recoveryimage-target, $@) endif $(INSTALLED_RECOVERYIMAGE_TARGET): $(MKBOOTFS) $(MKBOOTIMG) $(MINIGZIP) $(ADBD) \ $(INSTALLED_RAMDISK_TARGET) \ $(INSTALLED_BOOTIMAGE_TARGET) \ $(INTERNAL_RECOVERYIMAGE_FILES) \ $(recovery_initrc) $(recovery_sepolicy) $(recovery_kernel) \ $(INSTALLED_2NDBOOTLOADER_TARGET) \ $(recovery_build_props) $(recovery_resource_deps) \ $(recovery_fstab) \ $(RECOVERY_INSTALL_OTA_KEYS) \ $(INSTALLED_VENDOR_DEFAULT_PROP_TARGET) \ $(BOARD_RECOVERY_KERNEL_MODULES) \ $(DEPMOD) $(call build-recoveryimage-target, $@) ifdef RECOVERY_RESOURCE_ZIP $(RECOVERY_RESOURCE_ZIP): $(INSTALLED_RECOVERYIMAGE_TARGET) | $(ZIPTIME) $(hide) mkdir -p $(dir $@) $(hide) find $(TARGET_RECOVERY_ROOT_OUT)/res -type f | sort | zip -0qrjX $@ -@ $(remove-timestamps-from-package) endif .PHONY: recoveryimage-nodeps recoveryimage-nodeps: @echo "make $@: ignoring dependencies" $(call build-recoveryimage-target, $(INSTALLED_RECOVERYIMAGE_TARGET)) else # INSTALLED_RECOVERYIMAGE_TARGET not defined RECOVERY_RESOURCE_ZIP := endif .PHONY: recoveryimage recoveryimage: $(INSTALLED_RECOVERYIMAGE_TARGET) $(RECOVERY_RESOURCE_ZIP) ifneq ($(BOARD_NAND_PAGE_SIZE),) $(error MTD device is no longer supported and thus BOARD_NAND_PAGE_SIZE is deprecated.) endif ifneq ($(BOARD_NAND_SPARE_SIZE),) $(error MTD device is no longer supported and thus BOARD_NAND_SPARE_SIZE is deprecated.) endif # ----------------------------------------------------------------- # system image # # Remove overridden packages from $(ALL_PDK_FUSION_FILES) PDK_FUSION_SYSIMG_FILES := \ $(filter-out $(foreach p,$(overridden_packages),$(p) %/$(p).apk), \ $(ALL_PDK_FUSION_FILES)) INTERNAL_SYSTEMIMAGE_FILES := $(filter $(TARGET_OUT)/%, \ $(ALL_GENERATED_SOURCES) \ $(ALL_DEFAULT_INSTALLED_MODULES) \ $(PDK_FUSION_SYSIMG_FILES) \ $(RECOVERY_RESOURCE_ZIP)) FULL_SYSTEMIMAGE_DEPS := $(INTERNAL_SYSTEMIMAGE_FILES) $(INTERNAL_USERIMAGES_DEPS) # ASAN libraries in the system image - add dependency. ASAN_IN_SYSTEM_INSTALLED := $(TARGET_OUT)/asan.tar.bz2 ifneq (,$(SANITIZE_TARGET)) ifeq (true,$(SANITIZE_TARGET_SYSTEM)) FULL_SYSTEMIMAGE_DEPS += $(ASAN_IN_SYSTEM_INSTALLED) endif endif # ----------------------------------------------------------------- # installed file list # Depending on anything that $(BUILT_SYSTEMIMAGE) depends on. # We put installed-files.txt ahead of image itself in the dependency graph # so that we can get the size stat even if the build fails due to too large # system image. INSTALLED_FILES_FILE := $(PRODUCT_OUT)/installed-files.txt $(INSTALLED_FILES_FILE): $(FULL_SYSTEMIMAGE_DEPS) $(FILESLIST) @echo Installed file list: $@ @mkdir -p $(dir $@) @rm -f $@ $(hide) $(FILESLIST) $(TARGET_OUT) > $(@:.txt=.json) $(hide) build/make/tools/fileslist_util.py -c $(@:.txt=.json) > $@ .PHONY: installed-file-list installed-file-list: $(INSTALLED_FILES_FILE) $(call dist-for-goals, sdk win_sdk sdk_addon, $(INSTALLED_FILES_FILE)) systemimage_intermediates := \ $(call intermediates-dir-for,PACKAGING,systemimage) BUILT_SYSTEMIMAGE := $(systemimage_intermediates)/system.img # Create symlink /system/vendor to /vendor if necessary. ifdef BOARD_USES_VENDORIMAGE define create-system-vendor-symlink $(hide) if [ -d $(TARGET_OUT)/vendor ] && [ ! -h $(TARGET_OUT)/vendor ]; then \ echo 'Non-symlink $(TARGET_OUT)/vendor detected!' 1>&2; \ echo 'You cannot install files to $(TARGET_OUT)/vendor while building a separate vendor.img!' 1>&2; \ exit 1; \ fi $(hide) ln -sf /vendor $(TARGET_OUT)/vendor endef else define create-system-vendor-symlink endef endif # Create symlink /system/product to /product if necessary. ifdef BOARD_USES_PRODUCTIMAGE define create-system-product-symlink $(hide) if [ -d $(TARGET_OUT)/product ] && [ ! -h $(TARGET_OUT)/product ]; then \ echo 'Non-symlink $(TARGET_OUT)/product detected!' 1>&2; \ echo 'You cannot install files to $(TARGET_OUT)/product while building a separate product.img!' 1>&2; \ exit 1; \ fi $(hide) ln -sf /product $(TARGET_OUT)/product endef else define create-system-product-symlink endef endif # $(1): output file define build-systemimage-target @echo "Target system fs image: $(1)" $(call create-system-vendor-symlink) $(call create-system-product-symlink) @mkdir -p $(dir $(1)) $(systemimage_intermediates) && rm -rf $(systemimage_intermediates)/system_image_info.txt $(call generate-userimage-prop-dictionary, $(systemimage_intermediates)/system_image_info.txt, \ skip_fsck=true) $(hide) PATH=$(foreach p,$(INTERNAL_USERIMAGES_BINARY_PATHS),$(p):)$$PATH \ build/make/tools/releasetools/build_image.py \ $(TARGET_OUT) $(systemimage_intermediates)/system_image_info.txt $(1) $(TARGET_OUT) \ || ( echo "Out of space? the tree size of $(TARGET_OUT) is (MB): " 1>&2 ;\ du -sm $(TARGET_OUT) 1>&2;\ if [ "$(INTERNAL_USERIMAGES_EXT_VARIANT)" == "ext4" ]; then \ maxsize=$(BOARD_SYSTEMIMAGE_PARTITION_SIZE); \ echo "The max is $$(( maxsize / 1048576 )) MB." 1>&2 ;\ else \ echo "The max is $$(( $(BOARD_SYSTEMIMAGE_PARTITION_SIZE) / 1048576 )) MB." 1>&2 ;\ fi; \ mkdir -p $(DIST_DIR); cp $(INSTALLED_FILES_FILE) $(DIST_DIR)/installed-files-rescued.txt; \ exit 1 ) endef $(BUILT_SYSTEMIMAGE): $(FULL_SYSTEMIMAGE_DEPS) $(INSTALLED_FILES_FILE) $(BUILD_IMAGE_SRCS) $(call build-systemimage-target,$@) INSTALLED_SYSTEMIMAGE := $(PRODUCT_OUT)/system.img SYSTEMIMAGE_SOURCE_DIR := $(TARGET_OUT) # The system partition needs room for the recovery image as well. We # now store the recovery image as a binary patch using the boot image # as the source (since they are very similar). Generate the patch so # we can see how big it's going to be, and include that in the system # image size check calculation. ifneq ($(INSTALLED_RECOVERYIMAGE_TARGET),) ifneq ($(BOARD_USES_FULL_RECOVERY_IMAGE),true) intermediates := $(call intermediates-dir-for,PACKAGING,recovery_patch) RECOVERY_FROM_BOOT_PATCH := $(intermediates)/recovery_from_boot.p $(RECOVERY_FROM_BOOT_PATCH): $(INSTALLED_RECOVERYIMAGE_TARGET) \ $(INSTALLED_BOOTIMAGE_TARGET) \ $(HOST_OUT_EXECUTABLES)/imgdiff \ $(HOST_OUT_EXECUTABLES)/bsdiff @echo "Construct recovery from boot" mkdir -p $(dir $@) PATH=$(HOST_OUT_EXECUTABLES):$$PATH $(HOST_OUT_EXECUTABLES)/imgdiff $(INSTALLED_BOOTIMAGE_TARGET) $(INSTALLED_RECOVERYIMAGE_TARGET) $@ else # $(BOARD_USES_FULL_RECOVERY_IMAGE) == true RECOVERY_FROM_BOOT_PATCH := $(INSTALLED_RECOVERYIMAGE_TARGET) endif endif $(INSTALLED_SYSTEMIMAGE): $(BUILT_SYSTEMIMAGE) $(RECOVERY_FROM_BOOT_PATCH) @echo "Install system fs image: $@" $(copy-file-to-target) $(hide) $(call assert-max-image-size,$@ $(RECOVERY_FROM_BOOT_PATCH),$(BOARD_SYSTEMIMAGE_PARTITION_SIZE)) systemimage: $(INSTALLED_SYSTEMIMAGE) .PHONY: systemimage-nodeps snod systemimage-nodeps snod: $(filter-out systemimage-nodeps snod,$(MAKECMDGOALS)) \ | $(INTERNAL_USERIMAGES_DEPS) @echo "make $@: ignoring dependencies" $(call build-systemimage-target,$(INSTALLED_SYSTEMIMAGE)) $(hide) $(call assert-max-image-size,$(INSTALLED_SYSTEMIMAGE),$(BOARD_SYSTEMIMAGE_PARTITION_SIZE)) ifneq (,$(filter systemimage-nodeps snod, $(MAKECMDGOALS))) ifeq (true,$(WITH_DEXPREOPT)) $(warning Warning: with dexpreopt enabled, you may need a full rebuild.) endif endif .PHONY: sync sync: $(INTERNAL_SYSTEMIMAGE_FILES) ####### ## system tarball define build-systemtarball-target $(call pretty,"Target system fs tarball: $(INSTALLED_SYSTEMTARBALL_TARGET)") $(call create-system-vendor-symlink) $(call create-system-product-symlink) $(MKTARBALL) $(FS_GET_STATS) \ $(PRODUCT_OUT) system $(PRIVATE_SYSTEM_TAR) \ $(INSTALLED_SYSTEMTARBALL_TARGET) $(TARGET_OUT) endef ifndef SYSTEM_TARBALL_FORMAT SYSTEM_TARBALL_FORMAT := bz2 endif system_tar := $(PRODUCT_OUT)/system.tar INSTALLED_SYSTEMTARBALL_TARGET := $(system_tar).$(SYSTEM_TARBALL_FORMAT) $(INSTALLED_SYSTEMTARBALL_TARGET): PRIVATE_SYSTEM_TAR := $(system_tar) $(INSTALLED_SYSTEMTARBALL_TARGET): $(FS_GET_STATS) $(INTERNAL_SYSTEMIMAGE_FILES) $(build-systemtarball-target) .PHONY: systemtarball-nodeps systemtarball-nodeps: $(FS_GET_STATS) \ $(filter-out systemtarball-nodeps stnod,$(MAKECMDGOALS)) $(build-systemtarball-target) .PHONY: stnod stnod: systemtarball-nodeps # ----------------------------------------------------------------- ## platform.zip: system, plus other files to be used in PDK fusion build, ## in a zip file ## ## PDK_PLATFORM_ZIP_PRODUCT_BINARIES is used to store specified files to platform.zip. ## The variable will be typically set from BoardConfig.mk. ## Files under out dir will be rejected to prevent possible conflicts with other rules. pdk_odex_javalibs := $(strip $(foreach m,$(DEXPREOPT.MODULES.JAVA_LIBRARIES),\ $(if $(filter $(DEXPREOPT.$(m).INSTALLED),$(ALL_DEFAULT_INSTALLED_MODULES)),$(m)))) pdk_odex_apps := $(strip $(foreach m,$(DEXPREOPT.MODULES.APPS),\ $(if $(filter $(DEXPREOPT.$(m).INSTALLED),$(ALL_DEFAULT_INSTALLED_MODULES)),$(m)))) pdk_classes_dex := $(strip \ $(foreach m,$(pdk_odex_javalibs),$(call intermediates-dir-for,JAVA_LIBRARIES,$(m),,COMMON)/javalib.jar) \ $(foreach m,$(pdk_odex_apps),$(call intermediates-dir-for,APPS,$(m))/package.dex.apk)) pdk_odex_config_mk := $(PRODUCT_OUT)/pdk_dexpreopt_config.mk $(pdk_odex_config_mk): PRIVATE_JAVA_LIBRARIES := $(pdk_odex_javalibs) $(pdk_odex_config_mk): PRIVATE_APPS := $(pdk_odex_apps) $(pdk_odex_config_mk) : @echo "PDK odex config makefile: $@" $(hide) mkdir -p $(dir $@) $(hide) echo "# Auto-generated. Do not modify." > $@ $(hide) echo "PDK.DEXPREOPT.JAVA_LIBRARIES:=$(PRIVATE_JAVA_LIBRARIES)" >> $@ $(hide) echo "PDK.DEXPREOPT.APPS:=$(PRIVATE_APPS)" >> $@ $(foreach m,$(PRIVATE_JAVA_LIBRARIES),\ $(hide) echo "PDK.DEXPREOPT.$(m).SRC:=$(patsubst $(OUT_DIR)/%,%,$(call intermediates-dir-for,JAVA_LIBRARIES,$(m),,COMMON)/javalib.jar)" >> $@$(newline)\ $(hide) echo "PDK.DEXPREOPT.$(m).DEX_PREOPT:=$(DEXPREOPT.$(m).DEX_PREOPT)" >> $@$(newline)\ $(hide) echo "PDK.DEXPREOPT.$(m).MULTILIB:=$(DEXPREOPT.$(m).MULTILIB)" >> $@$(newline)\ $(hide) echo "PDK.DEXPREOPT.$(m).DEX_PREOPT_FLAGS:=$(DEXPREOPT.$(m).DEX_PREOPT_FLAGS)" >> $@$(newline)\ ) $(foreach m,$(PRIVATE_APPS),\ $(hide) echo "PDK.DEXPREOPT.$(m).SRC:=$(patsubst $(OUT_DIR)/%,%,$(call intermediates-dir-for,APPS,$(m))/package.dex.apk)" >> $@$(newline)\ $(hide) echo "PDK.DEXPREOPT.$(m).DEX_PREOPT:=$(DEXPREOPT.$(m).DEX_PREOPT)" >> $@$(newline)\ $(hide) echo "PDK.DEXPREOPT.$(m).MULTILIB:=$(DEXPREOPT.$(m).MULTILIB)" >> $@$(newline)\ $(hide) echo "PDK.DEXPREOPT.$(m).DEX_PREOPT_FLAGS:=$(DEXPREOPT.$(m).DEX_PREOPT_FLAGS)" >> $@$(newline)\ $(hide) echo "PDK.DEXPREOPT.$(m).PRIVILEGED_MODULE:=$(DEXPREOPT.$(m).PRIVILEGED_MODULE)" >> $@$(newline)\ $(hide) echo "PDK.DEXPREOPT.$(m).VENDOR_MODULE:=$(DEXPREOPT.$(m).VENDOR_MODULE)" >> $@$(newline)\ $(hide) echo "PDK.DEXPREOPT.$(m).TARGET_ARCH:=$(DEXPREOPT.$(m).TARGET_ARCH)" >> $@$(newline)\ $(hide) echo "PDK.DEXPREOPT.$(m).STRIPPED_SRC:=$(patsubst $(PRODUCT_OUT)/%,%,$(DEXPREOPT.$(m).INSTALLED_STRIPPED))" >> $@$(newline)\ ) PDK_PLATFORM_ZIP_PRODUCT_BINARIES := $(filter-out $(OUT_DIR)/%,$(PDK_PLATFORM_ZIP_PRODUCT_BINARIES)) INSTALLED_PLATFORM_ZIP := $(PRODUCT_OUT)/platform.zip $(INSTALLED_PLATFORM_ZIP): PRIVATE_DEX_FILES := $(pdk_classes_dex) $(INSTALLED_PLATFORM_ZIP): PRIVATE_ODEX_CONFIG := $(pdk_odex_config_mk) $(INSTALLED_PLATFORM_ZIP) : $(INTERNAL_SYSTEMIMAGE_FILES) $(pdk_odex_config_mk) $(call pretty,"Platform zip package: $(INSTALLED_PLATFORM_ZIP)") $(hide) rm -f $@ $(hide) cd $(dir $@) && zip -qryX $(notdir $@) \ $(TARGET_COPY_OUT_SYSTEM) \ $(patsubst $(PRODUCT_OUT)/%, %, $(TARGET_OUT_NOTICE_FILES)) \ $(addprefix symbols/,$(PDK_SYMBOL_FILES_LIST)) ifdef BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE $(hide) cd $(dir $@) && zip -qryX $(notdir $@) \ $(TARGET_COPY_OUT_VENDOR) endif ifdef BOARD_PRODUCTIMAGE_FILE_SYSTEM_TYPE $(hide) cd $(dir $@) && zip -qryX $(notdir $@) \ $(TARGET_COPY_OUT_PRODUCT) endif ifneq ($(PDK_PLATFORM_JAVA_ZIP_CONTENTS),) $(hide) cd $(OUT_DIR) && zip -qryX $(patsubst $(OUT_DIR)/%,%,$@) $(PDK_PLATFORM_JAVA_ZIP_CONTENTS) endif ifneq ($(PDK_PLATFORM_ZIP_PRODUCT_BINARIES),) $(hide) zip -qryX $@ $(PDK_PLATFORM_ZIP_PRODUCT_BINARIES) endif @# Add dex-preopt files and config. $(if $(PRIVATE_DEX_FILES),$(hide) cd $(OUT_DIR) && zip -qryX $(patsubst $(OUT_DIR)/%,%,$@ $(PRIVATE_DEX_FILES))) $(hide) zip -qryXj $@ $(PRIVATE_ODEX_CONFIG) .PHONY: platform platform: $(INSTALLED_PLATFORM_ZIP) .PHONY: platform-java platform-java: platform # Dist the platform.zip ifneq (,$(filter platform platform-java, $(MAKECMDGOALS))) $(call dist-for-goals, platform platform-java, $(INSTALLED_PLATFORM_ZIP)) endif # ----------------------------------------------------------------- ## boot tarball define build-boottarball-target $(hide) echo "Target boot fs tarball: $(INSTALLED_BOOTTARBALL_TARGET)" $(hide) mkdir -p $(PRODUCT_OUT)/boot $(hide) cp -f $(INTERNAL_BOOTIMAGE_FILES) $(PRODUCT_OUT)/boot/. $(hide) echo $(INTERNAL_KERNEL_CMDLINE) > $(PRODUCT_OUT)/boot/cmdline $(hide) $(MKTARBALL) $(FS_GET_STATS) \ $(PRODUCT_OUT) boot $(PRIVATE_BOOT_TAR) \ $(INSTALLED_BOOTTARBALL_TARGET) $(TARGET_OUT) endef ifndef BOOT_TARBALL_FORMAT BOOT_TARBALL_FORMAT := bz2 endif boot_tar := $(PRODUCT_OUT)/boot.tar INSTALLED_BOOTTARBALL_TARGET := $(boot_tar).$(BOOT_TARBALL_FORMAT) $(INSTALLED_BOOTTARBALL_TARGET): PRIVATE_BOOT_TAR := $(boot_tar) $(INSTALLED_BOOTTARBALL_TARGET): $(FS_GET_STATS) $(INTERNAL_BOOTIMAGE_FILES) $(build-boottarball-target) .PHONY: boottarball-nodeps btnod boottarball-nodeps btnod: $(FS_GET_STATS) \ $(filter-out boottarball-nodeps btnod,$(MAKECMDGOALS)) $(build-boottarball-target) # ----------------------------------------------------------------- # data partition image INTERNAL_USERDATAIMAGE_FILES := \ $(filter $(TARGET_OUT_DATA)/%,$(ALL_DEFAULT_INSTALLED_MODULES)) # Don't build userdata.img if it's extfs but no partition size skip_userdata.img := ifdef INTERNAL_USERIMAGES_EXT_VARIANT ifndef BOARD_USERDATAIMAGE_PARTITION_SIZE skip_userdata.img := true endif endif ifneq ($(skip_userdata.img),true) userdataimage_intermediates := \ $(call intermediates-dir-for,PACKAGING,userdata) BUILT_USERDATAIMAGE_TARGET := $(PRODUCT_OUT)/userdata.img define build-userdataimage-target $(call pretty,"Target userdata fs image: $(INSTALLED_USERDATAIMAGE_TARGET)") @mkdir -p $(TARGET_OUT_DATA) @mkdir -p $(userdataimage_intermediates) && rm -rf $(userdataimage_intermediates)/userdata_image_info.txt $(call generate-userimage-prop-dictionary, $(userdataimage_intermediates)/userdata_image_info.txt, skip_fsck=true) $(hide) PATH=$(foreach p,$(INTERNAL_USERIMAGES_BINARY_PATHS),$(p):)$$PATH \ build/make/tools/releasetools/build_image.py \ $(TARGET_OUT_DATA) $(userdataimage_intermediates)/userdata_image_info.txt $(INSTALLED_USERDATAIMAGE_TARGET) $(TARGET_OUT) $(hide) $(call assert-max-image-size,$(INSTALLED_USERDATAIMAGE_TARGET),$(BOARD_USERDATAIMAGE_PARTITION_SIZE)) endef # We just build this directly to the install location. INSTALLED_USERDATAIMAGE_TARGET := $(BUILT_USERDATAIMAGE_TARGET) INSTALLED_USERDATAIMAGE_TARGET_DEPS := \ $(INTERNAL_USERIMAGES_DEPS) \ $(INTERNAL_USERDATAIMAGE_FILES) \ $(BUILD_IMAGE_SRCS) $(INSTALLED_USERDATAIMAGE_TARGET): $(INSTALLED_USERDATAIMAGE_TARGET_DEPS) $(build-userdataimage-target) .PHONY: userdataimage-nodeps userdataimage-nodeps: | $(INTERNAL_USERIMAGES_DEPS) $(build-userdataimage-target) endif # not skip_userdata.img skip_userdata.img := # ASAN libraries in the system image - build rule. ASAN_OUT_DIRS_FOR_SYSTEM_INSTALL := $(sort $(patsubst $(PRODUCT_OUT)/%,%,\ $(TARGET_OUT_SHARED_LIBRARIES) \ $(2ND_TARGET_OUT_SHARED_LIBRARIES) \ $(TARGET_OUT_VENDOR_SHARED_LIBRARIES) \ $(2ND_TARGET_OUT_VENDOR_SHARED_LIBRARIES))) # Extra options: Enforce the system user for the files to avoid having to change ownership. ASAN_SYSTEM_INSTALL_OPTIONS := --owner=1000 --group=1000 # Note: experimentally, it seems not worth it to try to get "best" compression. We don't save # enough space. $(ASAN_IN_SYSTEM_INSTALLED): $(INSTALLED_USERDATAIMAGE_TARGET_DEPS) tar cfj $(ASAN_IN_SYSTEM_INSTALLED) $(ASAN_SYSTEM_INSTALL_OPTIONS) -C $(TARGET_OUT_DATA)/.. $(ASAN_OUT_DIRS_FOR_SYSTEM_INSTALL) >/dev/null ####### ## data partition tarball define build-userdatatarball-target $(call pretty,"Target userdata fs tarball: " \ "$(INSTALLED_USERDATATARBALL_TARGET)") $(MKTARBALL) $(FS_GET_STATS) \ $(PRODUCT_OUT) data $(PRIVATE_USERDATA_TAR) \ $(INSTALLED_USERDATATARBALL_TARGET) $(TARGET_OUT) endef userdata_tar := $(PRODUCT_OUT)/userdata.tar INSTALLED_USERDATATARBALL_TARGET := $(userdata_tar).bz2 $(INSTALLED_USERDATATARBALL_TARGET): PRIVATE_USERDATA_TAR := $(userdata_tar) $(INSTALLED_USERDATATARBALL_TARGET): $(FS_GET_STATS) $(INTERNAL_USERDATAIMAGE_FILES) $(build-userdatatarball-target) $(call dist-for-goals,userdatatarball,$(INSTALLED_USERDATATARBALL_TARGET)) .PHONY: userdatatarball-nodeps userdatatarball-nodeps: $(FS_GET_STATS) $(build-userdatatarball-target) # ----------------------------------------------------------------- # partition table image ifdef BOARD_BPT_INPUT_FILES BUILT_BPTIMAGE_TARGET := $(PRODUCT_OUT)/partition-table.img BUILT_BPTJSON_TARGET := $(PRODUCT_OUT)/partition-table.bpt INTERNAL_BVBTOOL_MAKE_TABLE_ARGS := \ --output_gpt $(BUILT_BPTIMAGE_TARGET) \ --output_json $(BUILT_BPTJSON_TARGET) \ $(foreach file, $(BOARD_BPT_INPUT_FILES), --input $(file)) ifdef BOARD_BPT_DISK_SIZE INTERNAL_BVBTOOL_MAKE_TABLE_ARGS += --disk_size $(BOARD_BPT_DISK_SIZE) endif define build-bptimage-target $(call pretty,"Target partition table image: $(INSTALLED_BPTIMAGE_TARGET)") $(hide) $(BPTTOOL) make_table $(INTERNAL_BVBTOOL_MAKE_TABLE_ARGS) $(BOARD_BPT_MAKE_TABLE_ARGS) endef INSTALLED_BPTIMAGE_TARGET := $(BUILT_BPTIMAGE_TARGET) $(BUILT_BPTJSON_TARGET): $(INSTALLED_BPTIMAGE_TARGET) $(hide) touch -c $(BUILT_BPTJSON_TARGET) $(INSTALLED_BPTIMAGE_TARGET): $(BPTTOOL) $(BOARD_BPT_INPUT_FILES) $(build-bptimage-target) .PHONY: bptimage-nodeps bptimage-nodeps: $(build-bptimage-target) endif # BOARD_BPT_INPUT_FILES # ----------------------------------------------------------------- # cache partition image ifdef BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE INTERNAL_CACHEIMAGE_FILES := \ $(filter $(TARGET_OUT_CACHE)/%,$(ALL_DEFAULT_INSTALLED_MODULES)) cacheimage_intermediates := \ $(call intermediates-dir-for,PACKAGING,cache) BUILT_CACHEIMAGE_TARGET := $(PRODUCT_OUT)/cache.img define build-cacheimage-target $(call pretty,"Target cache fs image: $(INSTALLED_CACHEIMAGE_TARGET)") @mkdir -p $(TARGET_OUT_CACHE) @mkdir -p $(cacheimage_intermediates) && rm -rf $(cacheimage_intermediates)/cache_image_info.txt $(call generate-userimage-prop-dictionary, $(cacheimage_intermediates)/cache_image_info.txt, skip_fsck=true) $(hide) PATH=$(foreach p,$(INTERNAL_USERIMAGES_BINARY_PATHS),$(p):)$$PATH \ build/make/tools/releasetools/build_image.py \ $(TARGET_OUT_CACHE) $(cacheimage_intermediates)/cache_image_info.txt $(INSTALLED_CACHEIMAGE_TARGET) $(TARGET_OUT) $(hide) $(call assert-max-image-size,$(INSTALLED_CACHEIMAGE_TARGET),$(BOARD_CACHEIMAGE_PARTITION_SIZE)) endef # We just build this directly to the install location. INSTALLED_CACHEIMAGE_TARGET := $(BUILT_CACHEIMAGE_TARGET) $(INSTALLED_CACHEIMAGE_TARGET): $(INTERNAL_USERIMAGES_DEPS) $(INTERNAL_CACHEIMAGE_FILES) $(BUILD_IMAGE_SRCS) $(build-cacheimage-target) .PHONY: cacheimage-nodeps cacheimage-nodeps: | $(INTERNAL_USERIMAGES_DEPS) $(build-cacheimage-target) else # BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE # we need to ignore the broken cache link when doing the rsync IGNORE_CACHE_LINK := --exclude=cache endif # BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE # ----------------------------------------------------------------- # system_other partition image ifeq ($(BOARD_USES_SYSTEM_OTHER_ODEX),true) BOARD_USES_SYSTEM_OTHER := true # Marker file to identify that odex files are installed INSTALLED_SYSTEM_OTHER_ODEX_MARKER := $(TARGET_OUT_SYSTEM_OTHER)/system-other-odex-marker ALL_DEFAULT_INSTALLED_MODULES += $(INSTALLED_SYSTEM_OTHER_ODEX_MARKER) $(INSTALLED_SYSTEM_OTHER_ODEX_MARKER): $(hide) touch $@ endif ifdef BOARD_USES_SYSTEM_OTHER INTERNAL_SYSTEMOTHERIMAGE_FILES := \ $(filter $(TARGET_OUT_SYSTEM_OTHER)/%,\ $(ALL_DEFAULT_INSTALLED_MODULES)\ $(ALL_PDK_FUSION_FILES)) INSTALLED_FILES_FILE_SYSTEMOTHER := $(PRODUCT_OUT)/installed-files-system-other.txt $(INSTALLED_FILES_FILE_SYSTEMOTHER) : $(INTERNAL_SYSTEMOTHERIMAGE_FILES) $(FILESLIST) @echo Installed file list: $@ @mkdir -p $(dir $@) @rm -f $@ $(hide) $(FILESLIST) $(TARGET_OUT_SYSTEM_OTHER) > $(@:.txt=.json) $(hide) build/make/tools/fileslist_util.py -c $(@:.txt=.json) > $@ systemotherimage_intermediates := \ $(call intermediates-dir-for,PACKAGING,system_other) BUILT_SYSTEMOTHERIMAGE_TARGET := $(PRODUCT_OUT)/system_other.img # Note that we assert the size is SYSTEMIMAGE_PARTITION_SIZE since this is the 'b' system image. define build-systemotherimage-target $(call pretty,"Target system_other fs image: $(INSTALLED_SYSTEMOTHERIMAGE_TARGET)") @mkdir -p $(TARGET_OUT_SYSTEM_OTHER) @mkdir -p $(systemotherimage_intermediates) && rm -rf $(systemotherimage_intermediates)/system_other_image_info.txt $(call generate-userimage-prop-dictionary, $(systemotherimage_intermediates)/system_other_image_info.txt, skip_fsck=true) $(hide) PATH=$(foreach p,$(INTERNAL_USERIMAGES_BINARY_PATHS),$(p):)$$PATH \ build/make/tools/releasetools/build_image.py \ $(TARGET_OUT_SYSTEM_OTHER) $(systemotherimage_intermediates)/system_other_image_info.txt $(INSTALLED_SYSTEMOTHERIMAGE_TARGET) $(TARGET_OUT) $(hide) $(call assert-max-image-size,$(INSTALLED_SYSTEMOTHERIMAGE_TARGET),$(BOARD_SYSTEMIMAGE_PARTITION_SIZE)) endef # We just build this directly to the install location. INSTALLED_SYSTEMOTHERIMAGE_TARGET := $(BUILT_SYSTEMOTHERIMAGE_TARGET) ifneq (true,$(SANITIZE_LITE)) # Only create system_other when not building the second stage of a SANITIZE_LITE build. $(INSTALLED_SYSTEMOTHERIMAGE_TARGET): $(INTERNAL_USERIMAGES_DEPS) $(INTERNAL_SYSTEMOTHERIMAGE_FILES) $(INSTALLED_FILES_FILE_SYSTEMOTHER) $(build-systemotherimage-target) endif .PHONY: systemotherimage-nodeps systemotherimage-nodeps: | $(INTERNAL_USERIMAGES_DEPS) $(build-systemotherimage-target) endif # BOARD_USES_SYSTEM_OTHER # ----------------------------------------------------------------- # vendor partition image ifdef BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE INTERNAL_VENDORIMAGE_FILES := \ $(filter $(TARGET_OUT_VENDOR)/%,\ $(ALL_DEFAULT_INSTALLED_MODULES)\ $(ALL_PDK_FUSION_FILES)) # platform.zip depends on $(INTERNAL_VENDORIMAGE_FILES). $(INSTALLED_PLATFORM_ZIP) : $(INTERNAL_VENDORIMAGE_FILES) INSTALLED_FILES_FILE_VENDOR := $(PRODUCT_OUT)/installed-files-vendor.txt $(INSTALLED_FILES_FILE_VENDOR) : $(INTERNAL_VENDORIMAGE_FILES) $(FILESLIST) @echo Installed file list: $@ @mkdir -p $(dir $@) @rm -f $@ $(hide) $(FILESLIST) $(TARGET_OUT_VENDOR) > $(@:.txt=.json) $(hide) build/make/tools/fileslist_util.py -c $(@:.txt=.json) > $@ vendorimage_intermediates := \ $(call intermediates-dir-for,PACKAGING,vendor) BUILT_VENDORIMAGE_TARGET := $(PRODUCT_OUT)/vendor.img define build-vendorimage-target $(call pretty,"Target vendor fs image: $(INSTALLED_VENDORIMAGE_TARGET)") @mkdir -p $(TARGET_OUT_VENDOR) @mkdir -p $(vendorimage_intermediates) && rm -rf $(vendorimage_intermediates)/vendor_image_info.txt $(call generate-userimage-prop-dictionary, $(vendorimage_intermediates)/vendor_image_info.txt, skip_fsck=true) $(if $(BOARD_VENDOR_KERNEL_MODULES), \ $(call build-image-kernel-modules,$(BOARD_VENDOR_KERNEL_MODULES),$(TARGET_OUT_VENDOR),vendor/,$(call intermediates-dir-for,PACKAGING,depmod_vendor))) $(hide) PATH=$(foreach p,$(INTERNAL_USERIMAGES_BINARY_PATHS),$(p):)$$PATH \ build/make/tools/releasetools/build_image.py \ $(TARGET_OUT_VENDOR) $(vendorimage_intermediates)/vendor_image_info.txt $(INSTALLED_VENDORIMAGE_TARGET) $(TARGET_OUT) $(hide) $(call assert-max-image-size,$(INSTALLED_VENDORIMAGE_TARGET),$(BOARD_VENDORIMAGE_PARTITION_SIZE)) endef # We just build this directly to the install location. INSTALLED_VENDORIMAGE_TARGET := $(BUILT_VENDORIMAGE_TARGET) $(INSTALLED_VENDORIMAGE_TARGET): $(INTERNAL_USERIMAGES_DEPS) $(INTERNAL_VENDORIMAGE_FILES) $(INSTALLED_FILES_FILE_VENDOR) $(BUILD_IMAGE_SRCS) $(DEPMOD) $(BOARD_VENDOR_KERNEL_MODULES) $(build-vendorimage-target) .PHONY: vendorimage-nodeps vnod vendorimage-nodeps vnod: | $(INTERNAL_USERIMAGES_DEPS) $(DEPMOD) $(build-vendorimage-target) sync: $(INTERNAL_VENDORIMAGE_FILES) else ifdef BOARD_PREBUILT_VENDORIMAGE INSTALLED_VENDORIMAGE_TARGET := $(PRODUCT_OUT)/vendor.img $(eval $(call copy-one-file,$(BOARD_PREBUILT_VENDORIMAGE),$(INSTALLED_VENDORIMAGE_TARGET))) endif # ----------------------------------------------------------------- # product partition image ifdef BOARD_PRODUCTIMAGE_FILE_SYSTEM_TYPE INTERNAL_PRODUCTIMAGE_FILES := \ $(filter $(TARGET_OUT_PRODUCT)/%,\ $(ALL_DEFAULT_INSTALLED_MODULES)\ $(ALL_PDK_FUSION_FILES)) # platform.zip depends on $(INTERNAL_PRODUCTIMAGE_FILES). $(INSTALLED_PLATFORM_ZIP) : $(INTERNAL_PRODUCTIMAGE_FILES) INSTALLED_FILES_FILE_PRODUCT := $(PRODUCT_OUT)/installed-files-product.txt $(INSTALLED_FILES_FILE_PRODUCT) : $(INTERNAL_PRODUCTIMAGE_FILES) $(FILESLIST) @echo Installed file list: $@ @mkdir -p $(dir $@) @rm -f $@ $(hide) $(FILESLIST) $(TARGET_OUT_PRODUCT) > $(@:.txt=.json) $(hide) build/tools/fileslist_util.py -c $(@:.txt=.json) > $@ productimage_intermediates := \ $(call intermediates-dir-for,PACKAGING,product) BUILT_PRODUCTIMAGE_TARGET := $(PRODUCT_OUT)/product.img define build-productimage-target $(call pretty,"Target product fs image: $(INSTALLED_PRODUCTIMAGE_TARGET)") @mkdir -p $(TARGET_OUT_PRODUCT) @mkdir -p $(productimage_intermediates) && rm -rf $(productimage_intermediates)/product_image_info.txt $(call generate-userimage-prop-dictionary, $(productimage_intermediates)/product_image_info.txt, skip_fsck=true) $(hide) PATH=$(foreach p,$(INTERNAL_USERIMAGES_BINARY_PATHS),$(p):)$$PATH \ ./build/tools/releasetools/build_image.py \ $(TARGET_OUT_PRODUCT) $(productimage_intermediates)/product_image_info.txt $(INSTALLED_PRODUCTIMAGE_TARGET) $(TARGET_OUT) $(hide) $(call assert-max-image-size,$(INSTALLED_PRODUCTIMAGE_TARGET),$(BOARD_PRODUCTIMAGE_PARTITION_SIZE)) endef # We just build this directly to the install location. INSTALLED_PRODUCTIMAGE_TARGET := $(BUILT_PRODUCTIMAGE_TARGET) $(INSTALLED_PRODUCTIMAGE_TARGET): $(INTERNAL_USERIMAGES_DEPS) $(INTERNAL_PRODUCTIMAGE_FILES) $(INSTALLED_FILES_FILE_PRODUCT) $(BUILD_IMAGE_SRCS) $(build-productimage-target) .PHONY: productimage-nodeps pnod productimage-nodeps pnod: | $(INTERNAL_USERIMAGES_DEPS) $(build-productimage-target) sync: $(INTERNAL_PRODUCTIMAGE_FILES) else ifdef BOARD_PREBUILT_PRODUCTIMAGE INSTALLED_PRODUCTIMAGE_TARGET := $(PRODUCT_OUT)/product.img $(eval $(call copy-one-file,$(BOARD_PREBUILT_PRODUCTIMAGE),$(INSTALLED_PRODUCTIMAGE_TARGET))) endif # ----------------------------------------------------------------- # dtbo image ifdef BOARD_PREBUILT_DTBOIMAGE INSTALLED_DTBOIMAGE_TARGET := $(PRODUCT_OUT)/dtbo.img ifeq ($(BOARD_AVB_ENABLE),true) $(INSTALLED_DTBOIMAGE_TARGET): $(BOARD_PREBUILT_DTBOIMAGE) $(AVBTOOL) $(BOARD_AVB_DTBO_KEY_PATH) cp $(BOARD_PREBUILT_DTBOIMAGE) $@ $(AVBTOOL) add_hash_footer \ --image $@ \ --partition_size $(BOARD_DTBOIMG_PARTITION_SIZE) \ --partition_name dtbo $(INTERNAL_AVB_DTBO_SIGNING_ARGS) \ $(BOARD_AVB_DTBO_ADD_HASH_FOOTER_ARGS) else $(INSTALLED_DTBOIMAGE_TARGET): $(BOARD_PREBUILT_DTBOIMAGE) cp $(BOARD_PREBUILT_DTBOIMAGE) $@ endif endif # ----------------------------------------------------------------- # vbmeta image ifeq ($(BOARD_AVB_ENABLE),true) BUILT_VBMETAIMAGE_TARGET := $(PRODUCT_OUT)/vbmeta.img AVB_CHAIN_KEY_DIR := $(TARGET_OUT_INTERMEDIATES)/avb_chain_keys ifdef BOARD_AVB_KEY_PATH $(if $(BOARD_AVB_ALGORITHM),,$(error BOARD_AVB_ALGORITHM is not defined)) else # If key path isn't specified, use the 4096-bit test key. BOARD_AVB_ALGORITHM := SHA256_RSA4096 BOARD_AVB_KEY_PATH := external/avb/test/data/testkey_rsa4096.pem endif INTERNAL_AVB_SIGNING_ARGS := \ --algorithm $(BOARD_AVB_ALGORITHM) --key $(BOARD_AVB_KEY_PATH) BOOT_FOOTER_ARGS := BOARD_AVB_BOOT_ADD_HASH_FOOTER_ARGS DTBO_FOOTER_ARGS := BOARD_AVB_DTBO_ADD_HASH_FOOTER_ARGS SYSTEM_FOOTER_ARGS := BOARD_AVB_SYSTEM_ADD_HASHTREE_FOOTER_ARGS VENDOR_FOOTER_ARGS := BOARD_AVB_VENDOR_ADD_HASHTREE_FOOTER_ARGS RECOVERY_FOOTER_ARGS := BOARD_AVB_RECOVERY_ADD_HASH_FOOTER_ARGS PRODUCT_FOOTER_ARGS := BOARD_AVB_PRODUCT_ADD_HASHTREE_FOOTER_ARGS # Check and set required build variables for a chain partition. # $(1): the partition to enable AVB chain, e.g., BOOT or SYSTEM. define check-and-set-avb-chain-args $(eval PART := $(1)) $(eval part=$(call to-lower,$(PART))) $(eval _key_path := BOARD_AVB_$(PART)_KEY_PATH) $(eval _signing_algorithm := BOARD_AVB_$(PART)_ALGORITHM) $(eval _rollback_index := BOARD_AVB_$(PART)_ROLLBACK_INDEX) $(eval _rollback_index_location := BOARD_AVB_$(PART)_ROLLBACK_INDEX_LOCATION) $(if $($(_key_path)),,$(error $(_key_path) is not defined)) $(if $($(_signing_algorithm)),,$(error $(_signing_algorithm) is not defined)) $(if $($(_rollback_index)),,$(error $(_rollback_index) is not defined)) $(if $($(_rollback_index_location)),,$(error $(_rollback_index_location) is not defined)) # Set INTERNAL_AVB_(PART)_SIGNING_ARGS $(eval _signing_args := INTERNAL_AVB_$(PART)_SIGNING_ARGS) $(eval $(_signing_args) := \ --algorithm $($(_signing_algorithm)) --key $($(_key_path))) $(eval INTERNAL_AVB_MAKE_VBMETA_IMAGE_ARGS += \ --chain_partition $(part):$($(_rollback_index_location)):$(AVB_CHAIN_KEY_DIR)/$(part).avbpubkey) # Set rollback_index via footer args $(eval _footer_args := $(PART)_FOOTER_ARGS) $(eval $($(_footer_args)) += --rollback_index $($(_rollback_index))) endef ifdef BOARD_AVB_BOOT_KEY_PATH $(eval $(call check-and-set-avb-chain-args,BOOT)) else INTERNAL_AVB_MAKE_VBMETA_IMAGE_ARGS += \ --include_descriptors_from_image $(INSTALLED_BOOTIMAGE_TARGET) endif ifdef BOARD_AVB_SYSTEM_KEY_PATH $(eval $(call check-and-set-avb-chain-args,SYSTEM)) else INTERNAL_AVB_MAKE_VBMETA_IMAGE_ARGS += \ --include_descriptors_from_image $(INSTALLED_SYSTEMIMAGE) endif ifdef INSTALLED_VENDORIMAGE_TARGET ifdef BOARD_AVB_VENDOR_KEY_PATH $(eval $(call check-and-set-avb-chain-args,VENDOR)) else INTERNAL_AVB_MAKE_VBMETA_IMAGE_ARGS += \ --include_descriptors_from_image $(INSTALLED_VENDORIMAGE_TARGET) endif endif ifdef INSTALLED_PRODUCTIMAGE_TARGET ifdef BOARD_AVB_PRODUCT_KEY_PATH $(eval $(call check-and-set-avb-chain-args,PRODUCT)) else INTERNAL_AVB_MAKE_VBMETA_IMAGE_ARGS += \ --include_descriptors_from_image $(INSTALLED_PRODUCTIMAGE_TARGET) endif endif ifdef INSTALLED_DTBOIMAGE_TARGET ifdef BOARD_AVB_DTBO_KEY_PATH $(eval $(call check-and-set-avb-chain-args,DTBO)) else INTERNAL_AVB_MAKE_VBMETA_IMAGE_ARGS += \ --include_descriptors_from_image $(INSTALLED_DTBOIMAGE_TARGET) endif endif ifdef INSTALLED_RECOVERYIMAGE_TARGET ifdef BOARD_AVB_RECOVERY_KEY_PATH $(eval $(call check-and-set-avb-chain-args,RECOVERY)) else INTERNAL_AVB_MAKE_VBMETA_IMAGE_ARGS += \ --include_descriptors_from_image $(INSTALLED_RECOVERYIMAGE_TARGET) endif endif BOARD_AVB_MAKE_VBMETA_IMAGE_ARGS += --padding_size 4096 # Add kernel cmdline descriptor for kernel to mount system.img as root with # dm-verity. This works when system.img is either chained or not-chained: # - chained: The --setup_as_rootfs_from_kernel option will add dm-verity kernel # cmdline descriptor to system.img # - not-chained: The --include_descriptors_from_image option for make_vbmeta_image # will include the kernel cmdline descriptor from system.img into vbmeta.img ifeq ($(BOARD_BUILD_SYSTEM_ROOT_IMAGE),true) BOARD_AVB_SYSTEM_ADD_HASHTREE_FOOTER_ARGS += --setup_as_rootfs_from_kernel endif ifdef BOARD_AVB_ROLLBACK_INDEX BOARD_AVB_MAKE_VBMETA_IMAGE_ARGS += --rollback_index $(BOARD_AVB_ROLLBACK_INDEX) endif ifndef BOARD_BOOTIMAGE_PARTITION_SIZE $(error BOARD_BOOTIMAGE_PARTITION_SIZE must be set for BOARD_AVB_ENABLE) endif ifndef BOARD_SYSTEMIMAGE_PARTITION_SIZE $(error BOARD_SYSTEMIMAGE_PARTITION_SIZE must be set for BOARD_AVB_ENABLE) endif # $(1): the directory to extract public keys to define extract-avb-chain-public-keys $(if $(BOARD_AVB_BOOT_KEY_PATH),\ $(hide) $(AVBTOOL) extract_public_key --key $(BOARD_AVB_BOOT_KEY_PATH) \ --output $(1)/boot.avbpubkey) $(if $(BOARD_AVB_SYSTEM_KEY_PATH),\ $(hide) $(AVBTOOL) extract_public_key --key $(BOARD_AVB_SYSTEM_KEY_PATH) \ --output $(1)/system.avbpubkey) $(if $(BOARD_AVB_VENDOR_KEY_PATH),\ $(hide) $(AVBTOOL) extract_public_key --key $(BOARD_AVB_VENDOR_KEY_PATH) \ --output $(1)/vendor.avbpubkey) $(if $(BOARD_AVB_PRODUCT_KEY_PATH),\ $(hide) $(AVBTOOL) extract_public_key --key $(BOARD_AVB_PRODUCT_KEY_PATH) \ --output $(1)/product.avbpubkey) $(if $(BOARD_AVB_DTBO_KEY_PATH),\ $(hide) $(AVBTOOL) extract_public_key --key $(BOARD_AVB_DTBO_KEY_PATH) \ --output $(1)/dtbo.avbpubkey) $(if $(BOARD_AVB_RECOVERY_KEY_PATH),\ $(hide) $(AVBTOOL) extract_public_key --key $(BOARD_AVB_RECOVERY_KEY_PATH) \ --output $(1)/recovery.avbpubkey) endef define build-vbmetaimage-target $(call pretty,"Target vbmeta image: $(INSTALLED_VBMETAIMAGE_TARGET)") $(hide) mkdir -p $(AVB_CHAIN_KEY_DIR) $(call extract-avb-chain-public-keys, $(AVB_CHAIN_KEY_DIR)) $(hide) $(AVBTOOL) make_vbmeta_image \ $(INTERNAL_AVB_MAKE_VBMETA_IMAGE_ARGS) \ $(INTERNAL_AVB_SIGNING_ARGS) \ $(BOARD_AVB_MAKE_VBMETA_IMAGE_ARGS) \ --output $@ $(hide) rm -rf $(AVB_CHAIN_KEY_DIR) endef INSTALLED_VBMETAIMAGE_TARGET := $(BUILT_VBMETAIMAGE_TARGET) $(INSTALLED_VBMETAIMAGE_TARGET): \ $(AVBTOOL) \ $(INSTALLED_BOOTIMAGE_TARGET) \ $(INSTALLED_SYSTEMIMAGE) \ $(INSTALLED_VENDORIMAGE_TARGET) \ $(INSTALLED_PRODUCTIMAGE_TARGET) \ $(INSTALLED_DTBOIMAGE_TARGET) \ $(INSTALLED_RECOVERYIMAGE_TARGET) \ $(BOARD_AVB_KEY_PATH) $(build-vbmetaimage-target) .PHONY: vbmetaimage-nodeps vbmetaimage-nodeps: $(build-vbmetaimage-target) else ifeq (true,$(BOARD_BUILD_DISABLED_VBMETAIMAGE)) BUILT_DISABLED_VBMETAIMAGE := $(PRODUCT_OUT)/vbmeta.img INSTALLED_VBMETAIMAGE_TARGET := $(BUILT_DISABLED_VBMETAIMAGE) $(INSTALLED_VBMETAIMAGE_TARGET): $(AVBTOOL) $(hide) $(AVBTOOL) make_vbmeta_image \ --flag 2 --padding_size 4096 --output $@ endif # BOARD_AVB_ENABLE # ----------------------------------------------------------------- # bring in the installer image generation defines if necessary ifeq ($(TARGET_USE_DISKINSTALLER),true) include bootable/diskinstaller/config.mk endif # ----------------------------------------------------------------- # host tools needed to build dist and OTA packages build_ota_package := true ifeq ($(TARGET_SKIP_OTA_PACKAGE),true) build_ota_package := false endif ifeq ($(BUILD_OS),darwin) build_ota_package := false endif ifneq ($(strip $(SANITIZE_TARGET)),) build_ota_package := false endif ifeq ($(TARGET_PRODUCT),sdk) build_ota_package := false endif ifneq ($(filter generic%,$(TARGET_DEVICE)),) build_ota_package := false endif ifeq ($(TARGET_NO_KERNEL),true) build_ota_package := false endif ifeq ($(recovery_fstab),) build_ota_package := false endif ifeq ($(TARGET_BUILD_PDK),true) build_ota_package := false endif ifeq ($(build_ota_package),true) OTATOOLS := $(HOST_OUT_EXECUTABLES)/minigzip \ $(HOST_OUT_EXECUTABLES)/aapt \ $(HOST_OUT_EXECUTABLES)/checkvintf \ $(HOST_OUT_EXECUTABLES)/mkbootfs \ $(HOST_OUT_EXECUTABLES)/mkbootimg \ $(HOST_OUT_EXECUTABLES)/fs_config \ $(HOST_OUT_EXECUTABLES)/zipalign \ $(HOST_OUT_EXECUTABLES)/bsdiff \ $(HOST_OUT_EXECUTABLES)/imgdiff \ $(HOST_OUT_JAVA_LIBRARIES)/dumpkey.jar \ $(HOST_OUT_JAVA_LIBRARIES)/signapk.jar \ $(HOST_OUT_JAVA_LIBRARIES)/BootSignature.jar \ $(HOST_OUT_JAVA_LIBRARIES)/VeritySigner.jar \ $(HOST_OUT_EXECUTABLES)/mke2fs \ $(HOST_OUT_EXECUTABLES)/mkuserimg_mke2fs.sh \ $(HOST_OUT_EXECUTABLES)/e2fsdroid \ $(HOST_OUT_EXECUTABLES)/mksquashfsimage.sh \ $(HOST_OUT_EXECUTABLES)/mksquashfs \ $(HOST_OUT_EXECUTABLES)/mkf2fsuserimg.sh \ $(HOST_OUT_EXECUTABLES)/make_f2fs \ $(HOST_OUT_EXECUTABLES)/sload_f2fs \ $(HOST_OUT_EXECUTABLES)/simg2img \ $(HOST_OUT_EXECUTABLES)/e2fsck \ $(HOST_OUT_EXECUTABLES)/build_verity_tree \ $(HOST_OUT_EXECUTABLES)/generate_verity_key \ $(HOST_OUT_EXECUTABLES)/verity_signer \ $(HOST_OUT_EXECUTABLES)/verity_verifier \ $(HOST_OUT_EXECUTABLES)/append2simg \ $(HOST_OUT_EXECUTABLES)/img2simg \ $(HOST_OUT_EXECUTABLES)/boot_signer \ $(HOST_OUT_EXECUTABLES)/fec \ $(HOST_OUT_EXECUTABLES)/brillo_update_payload \ $(HOST_OUT_EXECUTABLES)/lib/shflags/shflags \ $(HOST_OUT_EXECUTABLES)/delta_generator \ $(AVBTOOL) \ $(BLK_ALLOC_TO_BASE_FS) \ $(BROTLI) ifeq (true,$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VBOOT)) OTATOOLS += \ $(FUTILITY) \ $(VBOOT_SIGNER) endif # Shared libraries. OTATOOLS += \ $(HOST_LIBRARY_PATH)/libc++$(HOST_SHLIB_SUFFIX) \ $(HOST_LIBRARY_PATH)/liblog$(HOST_SHLIB_SUFFIX) \ $(HOST_LIBRARY_PATH)/libcutils$(HOST_SHLIB_SUFFIX) \ $(HOST_LIBRARY_PATH)/libselinux$(HOST_SHLIB_SUFFIX) \ $(HOST_LIBRARY_PATH)/libcrypto_utils$(HOST_SHLIB_SUFFIX) \ $(HOST_LIBRARY_PATH)/libcrypto-host$(HOST_SHLIB_SUFFIX) \ $(HOST_LIBRARY_PATH)/libext2fs-host$(HOST_SHLIB_SUFFIX) \ $(HOST_LIBRARY_PATH)/libext2_blkid-host$(HOST_SHLIB_SUFFIX) \ $(HOST_LIBRARY_PATH)/libext2_com_err-host$(HOST_SHLIB_SUFFIX) \ $(HOST_LIBRARY_PATH)/libext2_e2p-host$(HOST_SHLIB_SUFFIX) \ $(HOST_LIBRARY_PATH)/libext2_misc$(HOST_SHLIB_SUFFIX) \ $(HOST_LIBRARY_PATH)/libext2_profile-host$(HOST_SHLIB_SUFFIX) \ $(HOST_LIBRARY_PATH)/libext2_quota-host$(HOST_SHLIB_SUFFIX) \ $(HOST_LIBRARY_PATH)/libext2_uuid-host$(HOST_SHLIB_SUFFIX) \ $(HOST_LIBRARY_PATH)/libconscrypt_openjdk_jni$(HOST_SHLIB_SUFFIX) \ $(HOST_LIBRARY_PATH)/libbrillo$(HOST_SHLIB_SUFFIX) \ $(HOST_LIBRARY_PATH)/libbrillo-stream$(HOST_SHLIB_SUFFIX) \ $(HOST_LIBRARY_PATH)/libchrome$(HOST_SHLIB_SUFFIX) \ $(HOST_LIBRARY_PATH)/libcurl-host$(HOST_SHLIB_SUFFIX) \ $(HOST_LIBRARY_PATH)/libevent-host$(HOST_SHLIB_SUFFIX) \ $(HOST_LIBRARY_PATH)/libprotobuf-cpp-lite$(HOST_SHLIB_SUFFIX) \ $(HOST_LIBRARY_PATH)/libssl-host$(HOST_SHLIB_SUFFIX) \ $(HOST_LIBRARY_PATH)/libz-host$(HOST_SHLIB_SUFFIX) \ $(HOST_LIBRARY_PATH)/libsparse-host$(HOST_SHLIB_SUFFIX) \ $(HOST_LIBRARY_PATH)/libbase$(HOST_SHLIB_SUFFIX) \ $(HOST_LIBRARY_PATH)/libpcre2$(HOST_SHLIB_SUFFIX) \ $(HOST_LIBRARY_PATH)/libbrotli$(HOST_SHLIB_SUFFIX) .PHONY: otatools otatools: $(OTATOOLS) BUILT_OTATOOLS_PACKAGE := $(PRODUCT_OUT)/otatools.zip $(BUILT_OTATOOLS_PACKAGE): zip_root := $(call intermediates-dir-for,PACKAGING,otatools)/otatools OTATOOLS_DEPS := \ system/extras/verity/build_verity_metadata.py \ system/extras/ext4_utils/mke2fs.conf \ external/avb/test/data/testkey_rsa4096.pem \ $(sort $(shell find system/update_engine/scripts -name \*.pyc -prune -o -type f -print)) \ $(sort $(shell find build/target/product/security -type f -name \*.x509.pem -o -name \*.pk8 -o \ -name verity_key)) \ $(sort $(shell find device $(wildcard vendor) -type f -name \*.pk8 -o -name verifiedboot\* -o \ -name \*.x509.pem -o -name oem\*.prop)) OTATOOLS_RELEASETOOLS := \ $(sort $(shell find build/make/tools/releasetools -name \*.pyc -prune -o -type f)) ifeq (true,$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VBOOT)) OTATOOLS_DEPS += \ $(sort $(shell find external/vboot_reference/tests/devkeys -type f)) endif $(BUILT_OTATOOLS_PACKAGE): $(OTATOOLS) $(OTATOOLS_DEPS) $(OTATOOLS_RELEASETOOLS) | $(ACP) @echo "Package OTA tools: $@" $(hide) rm -rf $@ $(zip_root) $(hide) mkdir -p $(dir $@) $(zip_root)/bin $(zip_root)/framework $(zip_root)/releasetools $(call copy-files-with-structure,$(OTATOOLS),$(HOST_OUT)/,$(zip_root)) $(hide) $(ACP) -r -d -p build/make/tools/releasetools/* $(zip_root)/releasetools $(hide) rm -rf $@ $(zip_root)/releasetools/*.pyc $(hide) (cd $(zip_root) && zip -qryX $(abspath $@) *) $(hide) echo $(OTATOOLS_DEPS) | xargs zip -qryX $(abspath $@)>/dev/null || true .PHONY: otatools-package otatools-package: $(BUILT_OTATOOLS_PACKAGE) endif # build_ota_package # ----------------------------------------------------------------- # A zip of the directories that map to the target filesystem. # This zip can be used to create an OTA package or filesystem image # as a post-build step. # name := $(TARGET_PRODUCT) ifeq ($(TARGET_BUILD_TYPE),debug) name := $(name)_debug endif name := $(name)-target_files-$(FILE_NAME_TAG) intermediates := $(call intermediates-dir-for,PACKAGING,target_files) BUILT_TARGET_FILES_PACKAGE := $(intermediates)/$(name).zip $(BUILT_TARGET_FILES_PACKAGE): intermediates := $(intermediates) $(BUILT_TARGET_FILES_PACKAGE): \ zip_root := $(intermediates)/$(name) # $(1): Directory to copy # $(2): Location to copy it to # The "ls -A" is to prevent "acp s/* d" from failing if s is empty. define package_files-copy-root if [ -d "$(strip $(1))" -a "$$(ls -A $(1))" ]; then \ mkdir -p $(2) && \ $(ACP) -rd $(strip $(1))/* $(2); \ fi endef built_ota_tools := # We can't build static executables when SANITIZE_TARGET=address ifeq ($(strip $(SANITIZE_TARGET)),) built_ota_tools += \ $(call intermediates-dir-for,EXECUTABLES,updater,,,$(TARGET_PREFER_32_BIT))/updater endif $(BUILT_TARGET_FILES_PACKAGE): PRIVATE_OTA_TOOLS := $(built_ota_tools) $(BUILT_TARGET_FILES_PACKAGE): PRIVATE_RECOVERY_API_VERSION := $(RECOVERY_API_VERSION) $(BUILT_TARGET_FILES_PACKAGE): PRIVATE_RECOVERY_FSTAB_VERSION := $(RECOVERY_FSTAB_VERSION) ifeq ($(TARGET_RELEASETOOLS_EXTENSIONS),) # default to common dir for device vendor tool_extensions := $(TARGET_DEVICE_DIR)/../common else tool_extensions := $(TARGET_RELEASETOOLS_EXTENSIONS) endif tool_extension := $(wildcard $(tool_extensions)/releasetools.py) $(BUILT_TARGET_FILES_PACKAGE): PRIVATE_TOOL_EXTENSIONS := $(tool_extensions) $(BUILT_TARGET_FILES_PACKAGE): PRIVATE_TOOL_EXTENSION := $(tool_extension) ifeq ($(AB_OTA_UPDATER),true) updater_dep := system/update_engine/update_engine.conf else # Build OTA tools if not using the AB Updater. updater_dep := $(built_ota_tools) endif $(BUILT_TARGET_FILES_PACKAGE): $(updater_dep) # If we are using recovery as boot, output recovery files to BOOT/. ifeq ($(BOARD_USES_RECOVERY_AS_BOOT),true) $(BUILT_TARGET_FILES_PACKAGE): PRIVATE_RECOVERY_OUT := BOOT else $(BUILT_TARGET_FILES_PACKAGE): PRIVATE_RECOVERY_OUT := RECOVERY endif ifeq ($(AB_OTA_UPDATER),true) ifdef BRILLO_VENDOR_PARTITIONS $(BUILT_TARGET_FILES_PACKAGE): $(foreach p,$(BRILLO_VENDOR_PARTITIONS),\ $(call word-colon,1,$(p))/$(call word-colon,2,$(p))) endif ifdef OSRELEASED_DIRECTORY $(BUILT_TARGET_FILES_PACKAGE): $(TARGET_OUT_OEM)/$(OSRELEASED_DIRECTORY)/product_id $(BUILT_TARGET_FILES_PACKAGE): $(TARGET_OUT_OEM)/$(OSRELEASED_DIRECTORY)/product_version $(BUILT_TARGET_FILES_PACKAGE): $(TARGET_OUT_ETC)/$(OSRELEASED_DIRECTORY)/system_version endif endif # Run fs_config while creating the target files package # $1: root directory # $2: add prefix define fs_config (cd $(1); find . -type d | sed 's,$$,/,'; find . \! -type d) | cut -c 3- | sort | sed 's,^,$(2),' | $(HOST_OUT_EXECUTABLES)/fs_config -C -D $(TARGET_OUT) -S $(SELINUX_FC) endef # Depending on the various images guarantees that the underlying # directories are up-to-date. $(BUILT_TARGET_FILES_PACKAGE): \ $(INSTALLED_BOOTIMAGE_TARGET) \ $(INSTALLED_RADIOIMAGE_TARGET) \ $(INSTALLED_RECOVERYIMAGE_TARGET) \ $(FULL_SYSTEMIMAGE_DEPS) \ $(INSTALLED_USERDATAIMAGE_TARGET) \ $(INSTALLED_CACHEIMAGE_TARGET) \ $(INSTALLED_VENDORIMAGE_TARGET) \ $(INSTALLED_PRODUCTIMAGE_TARGET) \ $(INSTALLED_VBMETAIMAGE_TARGET) \ $(INSTALLED_DTBOIMAGE_TARGET) \ $(INTERNAL_SYSTEMOTHERIMAGE_FILES) \ $(INSTALLED_ANDROID_INFO_TXT_TARGET) \ $(INSTALLED_KERNEL_TARGET) \ $(INSTALLED_2NDBOOTLOADER_TARGET) \ $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SYSTEM_BASE_FS_PATH) \ $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VENDOR_BASE_FS_PATH) \ $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PRODUCT_BASE_FS_PATH) \ $(SELINUX_FC) \ $(APKCERTS_FILE) \ $(SOONG_ZIP) \ $(HOST_OUT_EXECUTABLES)/fs_config \ $(HOST_OUT_EXECUTABLES)/imgdiff \ $(HOST_OUT_EXECUTABLES)/bsdiff \ $(BUILD_IMAGE_SRCS) \ $(BUILT_VENDOR_MANIFEST) \ $(BUILT_VENDOR_MATRIX) \ | $(ACP) @echo "Package target files: $@" $(call create-system-vendor-symlink) $(call create-system-product-symlink) $(hide) rm -rf $@ $@.list $(zip_root) $(hide) mkdir -p $(dir $@) $(zip_root) ifneq (,$(INSTALLED_RECOVERYIMAGE_TARGET)$(filter true,$(BOARD_USES_RECOVERY_AS_BOOT))) @# Components of the recovery image $(hide) mkdir -p $(zip_root)/$(PRIVATE_RECOVERY_OUT) $(hide) $(call package_files-copy-root, \ $(TARGET_RECOVERY_ROOT_OUT),$(zip_root)/$(PRIVATE_RECOVERY_OUT)/RAMDISK) ifdef INSTALLED_KERNEL_TARGET $(hide) cp $(INSTALLED_KERNEL_TARGET) $(zip_root)/$(PRIVATE_RECOVERY_OUT)/kernel endif ifdef INSTALLED_2NDBOOTLOADER_TARGET $(hide) cp $(INSTALLED_2NDBOOTLOADER_TARGET) $(zip_root)/$(PRIVATE_RECOVERY_OUT)/second endif ifdef INTERNAL_KERNEL_CMDLINE $(hide) echo "$(INTERNAL_KERNEL_CMDLINE)" > $(zip_root)/$(PRIVATE_RECOVERY_OUT)/cmdline endif ifdef BOARD_KERNEL_BASE $(hide) echo "$(BOARD_KERNEL_BASE)" > $(zip_root)/$(PRIVATE_RECOVERY_OUT)/base endif ifdef BOARD_KERNEL_PAGESIZE $(hide) echo "$(BOARD_KERNEL_PAGESIZE)" > $(zip_root)/$(PRIVATE_RECOVERY_OUT)/pagesize endif endif # INSTALLED_RECOVERYIMAGE_TARGET defined or BOARD_USES_RECOVERY_AS_BOOT is true @# Components of the boot image $(hide) mkdir -p $(zip_root)/BOOT ifeq ($(BOARD_BUILD_SYSTEM_ROOT_IMAGE),true) $(hide) mkdir -p $(zip_root)/ROOT $(hide) $(call package_files-copy-root, \ $(TARGET_ROOT_OUT),$(zip_root)/ROOT) else $(hide) $(call package_files-copy-root, \ $(TARGET_ROOT_OUT),$(zip_root)/BOOT/RAMDISK) endif @# If we are using recovery as boot, this is already done when processing recovery. ifneq ($(BOARD_USES_RECOVERY_AS_BOOT),true) ifdef INSTALLED_KERNEL_TARGET $(hide) cp $(INSTALLED_KERNEL_TARGET) $(zip_root)/BOOT/kernel endif ifdef INSTALLED_2NDBOOTLOADER_TARGET $(hide) cp $(INSTALLED_2NDBOOTLOADER_TARGET) $(zip_root)/BOOT/second endif ifdef INTERNAL_KERNEL_CMDLINE $(hide) echo "$(INTERNAL_KERNEL_CMDLINE)" > $(zip_root)/BOOT/cmdline endif ifdef BOARD_KERNEL_BASE $(hide) echo "$(BOARD_KERNEL_BASE)" > $(zip_root)/BOOT/base endif ifdef BOARD_KERNEL_PAGESIZE $(hide) echo "$(BOARD_KERNEL_PAGESIZE)" > $(zip_root)/BOOT/pagesize endif endif # BOARD_USES_RECOVERY_AS_BOOT $(hide) $(foreach t,$(INSTALLED_RADIOIMAGE_TARGET),\ mkdir -p $(zip_root)/RADIO; \ cp $(t) $(zip_root)/RADIO/$(notdir $(t));) @# Contents of the system image $(hide) $(call package_files-copy-root, \ $(SYSTEMIMAGE_SOURCE_DIR),$(zip_root)/SYSTEM) @# Contents of the data image $(hide) $(call package_files-copy-root, \ $(TARGET_OUT_DATA),$(zip_root)/DATA) ifdef BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE @# Contents of the vendor image $(hide) $(call package_files-copy-root, \ $(TARGET_OUT_VENDOR),$(zip_root)/VENDOR) endif ifdef BOARD_PRODUCTIMAGE_FILE_SYSTEM_TYPE @# Contents of the product image $(hide) $(call package_files-copy-root, \ $(TARGET_OUT_PRODUCT),$(zip_root)/PRODUCT) endif ifdef INSTALLED_SYSTEMOTHERIMAGE_TARGET @# Contents of the system_other image $(hide) $(call package_files-copy-root, \ $(TARGET_OUT_SYSTEM_OTHER),$(zip_root)/SYSTEM_OTHER) endif @# Extra contents of the OTA package $(hide) mkdir -p $(zip_root)/OTA $(hide) cp $(INSTALLED_ANDROID_INFO_TXT_TARGET) $(zip_root)/OTA/ ifneq ($(AB_OTA_UPDATER),true) ifneq ($(built_ota_tools),) $(hide) mkdir -p $(zip_root)/OTA/bin $(hide) cp $(PRIVATE_OTA_TOOLS) $(zip_root)/OTA/bin/ endif endif @# Files that do not end up in any images, but are necessary to @# build them. $(hide) mkdir -p $(zip_root)/META $(hide) cp $(APKCERTS_FILE) $(zip_root)/META/apkcerts.txt ifneq ($(tool_extension),) $(hide) cp $(PRIVATE_TOOL_EXTENSION) $(zip_root)/META/ endif $(hide) echo "$(PRODUCT_OTA_PUBLIC_KEYS)" > $(zip_root)/META/otakeys.txt $(hide) cp $(SELINUX_FC) $(zip_root)/META/file_contexts.bin $(hide) echo "recovery_api_version=$(PRIVATE_RECOVERY_API_VERSION)" > $(zip_root)/META/misc_info.txt $(hide) echo "fstab_version=$(PRIVATE_RECOVERY_FSTAB_VERSION)" >> $(zip_root)/META/misc_info.txt ifdef BOARD_FLASH_BLOCK_SIZE $(hide) echo "blocksize=$(BOARD_FLASH_BLOCK_SIZE)" >> $(zip_root)/META/misc_info.txt endif ifdef BOARD_BOOTIMAGE_PARTITION_SIZE $(hide) echo "boot_size=$(BOARD_BOOTIMAGE_PARTITION_SIZE)" >> $(zip_root)/META/misc_info.txt endif ifeq ($(INSTALLED_RECOVERYIMAGE_TARGET),) $(hide) echo "no_recovery=true" >> $(zip_root)/META/misc_info.txt endif ifdef BOARD_RECOVERYIMAGE_PARTITION_SIZE $(hide) echo "recovery_size=$(BOARD_RECOVERYIMAGE_PARTITION_SIZE)" >> $(zip_root)/META/misc_info.txt endif ifdef TARGET_RECOVERY_FSTYPE_MOUNT_OPTIONS @# TARGET_RECOVERY_FSTYPE_MOUNT_OPTIONS can be empty to indicate that nothing but defaults should be used. $(hide) echo "recovery_mount_options=$(TARGET_RECOVERY_FSTYPE_MOUNT_OPTIONS)" >> $(zip_root)/META/misc_info.txt else $(hide) echo "recovery_mount_options=$(DEFAULT_TARGET_RECOVERY_FSTYPE_MOUNT_OPTIONS)" >> $(zip_root)/META/misc_info.txt endif $(hide) echo "tool_extensions=$(PRIVATE_TOOL_EXTENSIONS)" >> $(zip_root)/META/misc_info.txt $(hide) echo "default_system_dev_certificate=$(DEFAULT_SYSTEM_DEV_CERTIFICATE)" >> $(zip_root)/META/misc_info.txt ifdef PRODUCT_EXTRA_RECOVERY_KEYS $(hide) echo "extra_recovery_keys=$(PRODUCT_EXTRA_RECOVERY_KEYS)" >> $(zip_root)/META/misc_info.txt endif $(hide) echo 'mkbootimg_args=$(BOARD_MKBOOTIMG_ARGS)' >> $(zip_root)/META/misc_info.txt $(hide) echo 'mkbootimg_version_args=$(INTERNAL_MKBOOTIMG_VERSION_ARGS)' >> $(zip_root)/META/misc_info.txt $(hide) echo "multistage_support=1" >> $(zip_root)/META/misc_info.txt $(hide) echo "blockimgdiff_versions=3,4" >> $(zip_root)/META/misc_info.txt ifneq ($(OEM_THUMBPRINT_PROPERTIES),) # OTA scripts are only interested in fingerprint related properties $(hide) echo "oem_fingerprint_properties=$(OEM_THUMBPRINT_PROPERTIES)" >> $(zip_root)/META/misc_info.txt endif ifneq ($(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SYSTEM_BASE_FS_PATH),) $(hide) cp $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SYSTEM_BASE_FS_PATH) \ $(zip_root)/META/$(notdir $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SYSTEM_BASE_FS_PATH)) endif ifneq ($(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VENDOR_BASE_FS_PATH),) $(hide) cp $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VENDOR_BASE_FS_PATH) \ $(zip_root)/META/$(notdir $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VENDOR_BASE_FS_PATH)) endif ifneq ($(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PRODUCT_BASE_FS_PATH),) $(hide) cp $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PRODUCT_BASE_FS_PATH) \ $(zip_root)/META/$(notdir $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PRODUCT_BASE_FS_PATH)) endif ifneq ($(strip $(SANITIZE_TARGET)),) # We need to create userdata.img with real data because the instrumented libraries are in userdata.img. $(hide) echo "userdata_img_with_data=true" >> $(zip_root)/META/misc_info.txt endif ifeq ($(BOARD_USES_FULL_RECOVERY_IMAGE),true) $(hide) echo "full_recovery_image=true" >> $(zip_root)/META/misc_info.txt endif ifeq ($(BOARD_AVB_ENABLE),true) $(hide) echo "avb_enable=true" >> $(zip_root)/META/misc_info.txt $(hide) echo "avb_vbmeta_key_path=$(BOARD_AVB_KEY_PATH)" >> $(zip_root)/META/misc_info.txt $(hide) echo "avb_vbmeta_algorithm=$(BOARD_AVB_ALGORITHM)" >> $(zip_root)/META/misc_info.txt $(hide) echo "avb_vbmeta_args=$(BOARD_AVB_MAKE_VBMETA_IMAGE_ARGS)" >> $(zip_root)/META/misc_info.txt $(hide) echo "avb_boot_add_hash_footer_args=$(BOARD_AVB_BOOT_ADD_HASH_FOOTER_ARGS)" >> $(zip_root)/META/misc_info.txt ifdef BOARD_AVB_BOOT_KEY_PATH $(hide) echo "avb_boot_key_path=$(BOARD_AVB_BOOT_KEY_PATH)" >> $(zip_root)/META/misc_info.txt $(hide) echo "avb_boot_algorithm=$(BOARD_AVB_BOOT_ALGORITHM)" >> $(zip_root)/META/misc_info.txt $(hide) echo "avb_boot_rollback_index_location=$(BOARD_AVB_BOOT_ROLLBACK_INDEX_LOCATION)" >> $(zip_root)/META/misc_info.txt endif # BOARD_AVB_BOOT_KEY_PATH $(hide) echo "avb_recovery_add_hash_footer_args=$(BOARD_AVB_RECOVERY_ADD_HASH_FOOTER_ARGS)" >> $(zip_root)/META/misc_info.txt ifdef BOARD_AVB_RECOVERY_KEY_PATH $(hide) echo "avb_recovery_key_path=$(BOARD_AVB_RECOVERY_KEY_PATH)" >> $(zip_root)/META/misc_info.txt $(hide) echo "avb_recovery_algorithm=$(BOARD_AVB_RECOVERY_ALGORITHM)" >> $(zip_root)/META/misc_info.txt $(hide) echo "avb_recovery_rollback_index_location=$(BOARD_AVB_RECOVERY_ROLLBACK_INDEX_LOCATION)" >> $(zip_root)/META/misc_info.txt endif # BOARD_AVB_RECOVERY_KEY_PATH endif # BOARD_AVB_ENABLE ifdef BOARD_BPT_INPUT_FILES $(hide) echo "board_bpt_enable=true" >> $(zip_root)/META/misc_info.txt $(hide) echo "board_bpt_make_table_args=$(BOARD_BPT_MAKE_TABLE_ARGS)" >> $(zip_root)/META/misc_info.txt $(hide) echo "board_bpt_input_files=$(BOARD_BPT_INPUT_FILES)" >> $(zip_root)/META/misc_info.txt endif ifdef BOARD_BPT_DISK_SIZE $(hide) echo "board_bpt_disk_size=$(BOARD_BPT_DISK_SIZE)" >> $(zip_root)/META/misc_info.txt endif $(call generate-userimage-prop-dictionary, $(zip_root)/META/misc_info.txt) ifneq ($(INSTALLED_RECOVERYIMAGE_TARGET),) $(hide) PATH=$(foreach p,$(INTERNAL_USERIMAGES_BINARY_PATHS),$(p):)$$PATH MKBOOTIMG=$(MKBOOTIMG) \ build/make/tools/releasetools/make_recovery_patch $(zip_root) $(zip_root) endif ifeq ($(AB_OTA_UPDATER),true) @# When using the A/B updater, include the updater config files in the zip. $(hide) cp $(TOPDIR)system/update_engine/update_engine.conf $(zip_root)/META/update_engine_config.txt $(hide) for part in $(AB_OTA_PARTITIONS); do \ echo "$${part}" >> $(zip_root)/META/ab_partitions.txt; \ done $(hide) for conf in $(AB_OTA_POSTINSTALL_CONFIG); do \ echo "$${conf}" >> $(zip_root)/META/postinstall_config.txt; \ done @# Include the build type in META/misc_info.txt so the server can easily differentiate production builds. $(hide) echo "build_type=$(TARGET_BUILD_VARIANT)" >> $(zip_root)/META/misc_info.txt $(hide) echo "ab_update=true" >> $(zip_root)/META/misc_info.txt ifdef BRILLO_VENDOR_PARTITIONS $(hide) mkdir -p $(zip_root)/VENDOR_IMAGES $(hide) for f in $(BRILLO_VENDOR_PARTITIONS); do \ pair1="$$(echo $$f | awk -F':' '{print $$1}')"; \ pair2="$$(echo $$f | awk -F':' '{print $$2}')"; \ src=$${pair1}/$${pair2}; \ dest=$(zip_root)/VENDOR_IMAGES/$${pair2}; \ mkdir -p $$(dirname "$${dest}"); \ cp $${src} $${dest}; \ done; endif ifdef OSRELEASED_DIRECTORY $(hide) cp $(TARGET_OUT_OEM)/$(OSRELEASED_DIRECTORY)/product_id $(zip_root)/META/product_id.txt $(hide) cp $(TARGET_OUT_OEM)/$(OSRELEASED_DIRECTORY)/product_version $(zip_root)/META/product_version.txt $(hide) cp $(TARGET_OUT_ETC)/$(OSRELEASED_DIRECTORY)/system_version $(zip_root)/META/system_version.txt endif endif ifeq ($(BREAKPAD_GENERATE_SYMBOLS),true) @# If breakpad symbols have been generated, add them to the zip. $(hide) $(ACP) -r $(TARGET_OUT_BREAKPAD) $(zip_root)/BREAKPAD endif # BOARD_BUILD_DISABLED_VBMETAIMAGE is used to build a special vbmeta.img # that disables AVB verification. The content is fixed and we can just copy # it to $(zip_root)/IMAGES without passing some info into misc_info.txt for # regeneration. ifeq (true,$(BOARD_BUILD_DISABLED_VBMETAIMAGE)) $(hide) mkdir -p $(zip_root)/IMAGES $(hide) cp $(INSTALLED_VBMETAIMAGE_TARGET) $(zip_root)/IMAGES/ endif ifdef BOARD_PREBUILT_VENDORIMAGE $(hide) mkdir -p $(zip_root)/IMAGES $(hide) cp $(INSTALLED_VENDORIMAGE_TARGET) $(zip_root)/IMAGES/ endif ifdef BOARD_PREBUILT_PRODUCTIMAGE $(hide) mkdir -p $(zip_root)/IMAGES $(hide) cp $(INSTALLED_PRODUCTIMAGE_TARGET) $(zip_root)/IMAGES/ endif ifdef BOARD_PREBUILT_BOOTIMAGE $(hide) mkdir -p $(zip_root)/IMAGES $(hide) cp $(INSTALLED_BOOTIMAGE_TARGET) $(zip_root)/IMAGES/ endif ifdef BOARD_PREBUILT_DTBOIMAGE $(hide) mkdir -p $(zip_root)/PREBUILT_IMAGES $(hide) cp $(INSTALLED_DTBOIMAGE_TARGET) $(zip_root)/PREBUILT_IMAGES/ $(hide) echo "has_dtbo=true" >> $(zip_root)/META/misc_info.txt ifeq ($(BOARD_AVB_ENABLE),true) $(hide) echo "dtbo_size=$(BOARD_DTBOIMG_PARTITION_SIZE)" >> $(zip_root)/META/misc_info.txt $(hide) echo "avb_dtbo_add_hash_footer_args=$(BOARD_AVB_DTBO_ADD_HASH_FOOTER_ARGS)" >> $(zip_root)/META/misc_info.txt ifdef BOARD_AVB_DTBO_KEY_PATH $(hide) echo "avb_dtbo_key_path=$(BOARD_AVB_DTBO_KEY_PATH)" >> $(zip_root)/META/misc_info.txt $(hide) echo "avb_dtbo_algorithm=$(BOARD_AVB_DTBO_ALGORITHM)" >> $(zip_root)/META/misc_info.txt $(hide) echo "avb_dtbo_rollback_index_location=$(BOARD_AVB_DTBO_ROLLBACK_INDEX_LOCATION)" \ >> $(zip_root)/META/misc_info.txt endif # BOARD_AVB_DTBO_KEY_PATH endif # BOARD_AVB_ENABLE endif # BOARD_PREBUILT_DTBOIMAGE @# The radio images in BOARD_PACK_RADIOIMAGES will be additionally copied from RADIO/ into @# IMAGES/, which then will be added into -img.zip. Such images must be listed in @# INSTALLED_RADIOIMAGE_TARGET. $(hide) $(foreach part,$(BOARD_PACK_RADIOIMAGES), \ echo $(part) >> $(zip_root)/META/pack_radioimages.txt;) @# Run fs_config on all the system, vendor, boot ramdisk, @# and recovery ramdisk files in the zip, and save the output $(hide) $(call fs_config,$(zip_root)/SYSTEM,system/) > $(zip_root)/META/filesystem_config.txt ifdef BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE $(hide) $(call fs_config,$(zip_root)/VENDOR,vendor/) > $(zip_root)/META/vendor_filesystem_config.txt endif ifdef BOARD_PRODUCTIMAGE_FILE_SYSTEM_TYPE $(hide) $(call fs_config,$(zip_root)/PRODUCT,product/) > $(zip_root)/META/product_filesystem_config.txt endif ifeq ($(BOARD_BUILD_SYSTEM_ROOT_IMAGE),true) $(hide) $(call fs_config,$(zip_root)/ROOT,) > $(zip_root)/META/root_filesystem_config.txt endif $(hide) $(call fs_config,$(zip_root)/BOOT/RAMDISK,) > $(zip_root)/META/boot_filesystem_config.txt ifneq ($(INSTALLED_RECOVERYIMAGE_TARGET),) $(hide) $(call fs_config,$(zip_root)/RECOVERY/RAMDISK,) > $(zip_root)/META/recovery_filesystem_config.txt endif ifdef INSTALLED_SYSTEMOTHERIMAGE_TARGET $(hide) $(call fs_config,$(zip_root)/SYSTEM_OTHER,system/) > $(zip_root)/META/system_other_filesystem_config.txt endif @# Metadata for compatibility verification. $(hide) cp $(BUILT_SYSTEM_MANIFEST) $(zip_root)/META/system_manifest.xml $(hide) cp $(BUILT_SYSTEM_COMPATIBILITY_MATRIX) $(zip_root)/META/system_matrix.xml ifdef BUILT_VENDOR_MANIFEST $(hide) cp $(BUILT_VENDOR_MANIFEST) $(zip_root)/META/vendor_manifest.xml endif ifdef BUILT_VENDOR_MATRIX $(hide) cp $(BUILT_VENDOR_MATRIX) $(zip_root)/META/vendor_matrix.xml endif $(hide) PATH=$(foreach p,$(INTERNAL_USERIMAGES_BINARY_PATHS),$(p):)$$PATH MKBOOTIMG=$(MKBOOTIMG) \ build/make/tools/releasetools/add_img_to_target_files -a -v -p $(HOST_OUT) $(zip_root) @# Zip everything up, preserving symlinks and placing META/ files first to @# help early validation of the .zip file while uploading it. $(hide) find $(zip_root)/META | sort >$@.list $(hide) find $(zip_root) -path $(zip_root)/META -prune -o -print | sort >>$@.list $(hide) $(SOONG_ZIP) -d -o $@ -C $(zip_root) -l $@.list .PHONY: target-files-package target-files-package: $(BUILT_TARGET_FILES_PACKAGE) ifneq ($(filter $(MAKECMDGOALS),target-files-package),) $(call dist-for-goals, target-files-package, $(BUILT_TARGET_FILES_PACKAGE)) endif # ----------------------------------------------------------------- # NDK Sysroot Package NDK_SYSROOT_TARGET := $(PRODUCT_OUT)/ndk_sysroot.tar.bz2 $(NDK_SYSROOT_TARGET): ndk @echo Package NDK sysroot... $(hide) tar cjf $@ -C $(SOONG_OUT_DIR) ndk $(call dist-for-goals,sdk,$(NDK_SYSROOT_TARGET)) ifeq ($(build_ota_package),true) # ----------------------------------------------------------------- # OTA update package name := $(TARGET_PRODUCT) ifeq ($(TARGET_BUILD_TYPE),debug) name := $(name)_debug endif name := $(name)-ota-$(FILE_NAME_TAG) INTERNAL_OTA_PACKAGE_TARGET := $(PRODUCT_OUT)/$(name).zip $(INTERNAL_OTA_PACKAGE_TARGET): KEY_CERT_PAIR := $(DEFAULT_KEY_CERT_PAIR) ifeq ($(AB_OTA_UPDATER),true) $(INTERNAL_OTA_PACKAGE_TARGET): $(BRILLO_UPDATE_PAYLOAD) else $(INTERNAL_OTA_PACKAGE_TARGET): $(BROTLI) endif $(INTERNAL_OTA_PACKAGE_TARGET): $(BUILT_TARGET_FILES_PACKAGE) \ build/make/tools/releasetools/ota_from_target_files @echo "Package OTA: $@" $(hide) PATH=$(foreach p,$(INTERNAL_USERIMAGES_BINARY_PATHS),$(p):)$$PATH MKBOOTIMG=$(MKBOOTIMG) \ build/make/tools/releasetools/ota_from_target_files -v \ --block \ --extracted_input_target_files $(patsubst %.zip,%,$(BUILT_TARGET_FILES_PACKAGE)) \ -p $(HOST_OUT) \ -k $(KEY_CERT_PAIR) \ $(if $(OEM_OTA_CONFIG), -o $(OEM_OTA_CONFIG)) \ $(BUILT_TARGET_FILES_PACKAGE) $@ .PHONY: otapackage otapackage: $(INTERNAL_OTA_PACKAGE_TARGET) endif # build_ota_package # ----------------------------------------------------------------- # The update package name := $(TARGET_PRODUCT) ifeq ($(TARGET_BUILD_TYPE),debug) name := $(name)_debug endif name := $(name)-img-$(FILE_NAME_TAG) INTERNAL_UPDATE_PACKAGE_TARGET := $(PRODUCT_OUT)/$(name).zip $(INTERNAL_UPDATE_PACKAGE_TARGET): $(BUILT_TARGET_FILES_PACKAGE) $(ZIP2ZIP) @echo "Package: $@" $(hide) $(ZIP2ZIP) -i $(BUILT_TARGET_FILES_PACKAGE) -o $@ \ OTA/android-info.txt:android-info.txt "IMAGES/*.img:." .PHONY: updatepackage updatepackage: $(INTERNAL_UPDATE_PACKAGE_TARGET) # ----------------------------------------------------------------- # A zip of the symbols directory. Keep the full paths to make it # more obvious where these files came from. # name := $(TARGET_PRODUCT) ifeq ($(TARGET_BUILD_TYPE),debug) name := $(name)_debug endif name := $(name)-symbols-$(FILE_NAME_TAG) SYMBOLS_ZIP := $(PRODUCT_OUT)/$(name).zip # For apps_only build we'll establish the dependency later in build/make/core/main.mk. ifndef TARGET_BUILD_APPS $(SYMBOLS_ZIP): $(INSTALLED_SYSTEMIMAGE) \ $(INSTALLED_BOOTIMAGE_TARGET) \ $(INSTALLED_USERDATAIMAGE_TARGET) \ $(INSTALLED_VENDORIMAGE_TARGET) \ $(INSTALLED_PRODUCTIMAGE_TARGET) \ $(updater_dep) endif $(SYMBOLS_ZIP): PRIVATE_LIST_FILE := $(call intermediates-dir-for,PACKAGING,symbols)/filelist $(SYMBOLS_ZIP): $(SOONG_ZIP) @echo "Package symbols: $@" $(hide) rm -rf $@ $(PRIVATE_LIST_FILE) $(hide) mkdir -p $(dir $@) $(TARGET_OUT_UNSTRIPPED) $(dir $(PRIVATE_LIST_FILE)) $(hide) find $(TARGET_OUT_UNSTRIPPED) | sort >$(PRIVATE_LIST_FILE) $(hide) $(SOONG_ZIP) -d -o $@ -C $(OUT_DIR)/.. -l $(PRIVATE_LIST_FILE) # ----------------------------------------------------------------- # A zip of the coverage directory. # name := $(TARGET_PRODUCT) ifeq ($(TARGET_BUILD_TYPE),debug) name := $(name)_debug endif name := $(name)-coverage-$(FILE_NAME_TAG) COVERAGE_ZIP := $(PRODUCT_OUT)/$(name).zip ifndef TARGET_BUILD_APPS $(COVERAGE_ZIP): $(INSTALLED_SYSTEMIMAGE) \ $(INSTALLED_BOOTIMAGE_TARGET) \ $(INSTALLED_USERDATAIMAGE_TARGET) \ $(INSTALLED_VENDORIMAGE_TARGET) \ $(INSTALLED_PRODUCTIMAGE_TARGET) endif $(COVERAGE_ZIP): PRIVATE_LIST_FILE := $(call intermediates-dir-for,PACKAGING,coverage)/filelist $(COVERAGE_ZIP): $(SOONG_ZIP) @echo "Package coverage: $@" $(hide) rm -rf $@ $(PRIVATE_LIST_FILE) $(hide) mkdir -p $(dir $@) $(TARGET_OUT_COVERAGE) $(dir $(PRIVATE_LIST_FILE)) $(hide) find $(TARGET_OUT_COVERAGE) | sort >$(PRIVATE_LIST_FILE) $(hide) $(SOONG_ZIP) -d -o $@ -C $(TARGET_OUT_COVERAGE) -l $(PRIVATE_LIST_FILE) # ----------------------------------------------------------------- # A zip of the Android Apps. Not keeping full path so that we don't # include product names when distributing # name := $(TARGET_PRODUCT) ifeq ($(TARGET_BUILD_TYPE),debug) name := $(name)_debug endif name := $(name)-apps-$(FILE_NAME_TAG) APPS_ZIP := $(PRODUCT_OUT)/$(name).zip $(APPS_ZIP): $(INSTALLED_SYSTEMIMAGE) @echo "Package apps: $@" $(hide) rm -rf $@ $(hide) mkdir -p $(dir $@) $(hide) apps_to_zip=`find $(TARGET_OUT_APPS) $(TARGET_OUT_APPS_PRIVILEGED) -mindepth 2 -maxdepth 3 -name "*.apk"`; \ if [ -z "$$apps_to_zip" ]; then \ echo "No apps to zip up. Generating empty apps archive." ; \ a=$$(mktemp /tmp/XXXXXXX) && touch $$a && zip $@ $$a && zip -d $@ $$a; \ else \ zip -qjX $@ $$apps_to_zip; \ fi ifeq (true,$(EMMA_INSTRUMENT)) #------------------------------------------------------------------ # An archive of classes for use in generating code-coverage reports # These are the uninstrumented versions of any classes that were # to be instrumented. # Any dependencies are set up later in build/make/core/main.mk. JACOCO_REPORT_CLASSES_ALL := $(PRODUCT_OUT)/jacoco-report-classes-all.jar $(JACOCO_REPORT_CLASSES_ALL) : @echo "Collecting uninstrumented classes" $(hide) find $(TARGET_COMMON_OUT_ROOT) $(HOST_COMMON_OUT_ROOT) -name "jacoco-report-classes.jar" | \ zip -@ -0 -q -X $@ # Meaning of these options: # -@ scan stdin for file paths to add to the zip # -0 don't do any compression # -q supress most output # -X skip storing extended file attributes endif # EMMA_INSTRUMENT=true #------------------------------------------------------------------ # A zip of Proguard obfuscation dictionary files. # Only for apps_only build. # ifdef TARGET_BUILD_APPS PROGUARD_DICT_ZIP := $(PRODUCT_OUT)/$(TARGET_PRODUCT)-proguard-dict-$(FILE_NAME_TAG).zip # the dependency will be set up later in build/make/core/main.mk. $(PROGUARD_DICT_ZIP) : @echo "Packaging Proguard obfuscation dictionary files." $(hide) dict_files=`find $(TARGET_OUT_COMMON_INTERMEDIATES)/APPS -name proguard_dictionary`; \ if [ -n "$$dict_files" ]; then \ unobfuscated_jars=$${dict_files//proguard_dictionary/classes.jar}; \ zip -qX $@ $$dict_files $$unobfuscated_jars; \ else \ touch $(dir $@)/zipdummy; \ (cd $(dir $@) && zip -q $(notdir $@) zipdummy); \ zip -qd $@ zipdummy; \ rm $(dir $@)/zipdummy; \ fi endif # TARGET_BUILD_APPS # ----------------------------------------------------------------- # dalvik something .PHONY: dalvikfiles dalvikfiles: $(INTERNAL_DALVIK_MODULES) ifeq ($(BUILD_QEMU_IMAGES),true) INSTALLED_QEMU_SYSTEMIMAGE := $(PRODUCT_OUT)/system-qemu.img MK_QEMU_IMAGE_SH := device/generic/goldfish/tools/mk_qemu_image.sh SGDISK_HOST := $(HOST_OUT_EXECUTABLES)/sgdisk $(INSTALLED_QEMU_SYSTEMIMAGE): $(INSTALLED_SYSTEMIMAGE) $(MK_QEMU_IMAGE_SH) $(SGDISK_HOST) @echo Create system-qemu.img (export SGDISK=$(SGDISK_HOST); $(MK_QEMU_IMAGE_SH) ${PRODUCT_OUT}/system.img) systemimage: $(INSTALLED_QEMU_SYSTEMIMAGE) droidcore: $(INSTALLED_QEMU_SYSTEMIMAGE) ifeq ($(BOARD_USES_VENDORIMAGE),true) INSTALLED_QEMU_VENDORIMAGE := $(PRODUCT_OUT)/vendor-qemu.img $(INSTALLED_QEMU_VENDORIMAGE): $(INSTALLED_VENDORIMAGE_TARGET) $(MK_QEMU_IMAGE_SH) $(SGDISK_HOST) @echo Create vendor-qemu.img (export SGDISK=$(SGDISK_HOST); $(MK_QEMU_IMAGE_SH) ${PRODUCT_OUT}/vendor.img) vendorimage: $(INSTALLED_QEMU_VENDORIMAGE) droidcore: $(INSTALLED_QEMU_VENDORIMAGE) endif ifeq ($(BOARD_USES_PRODUCTIMAGE),true) INSTALLED_QEMU_PRODUCTIMAGE := $(PRODUCT_OUT)/product-qemu.img $(INSTALLED_QEMU_PRODUCTIMAGE): $(INSTALLED_PRODUCTIMAGE_TARGET) $(MK_QEMU_IMAGE_SH) $(SGDISK_HOST) @echo Create product-qemu.img (export SGDISK=$(SGDISK_HOST); $(MK_QEMU_IMAGE_SH) ${PRODUCT_OUT}/product.img) productimage: $(INSTALLED_QEMU_PRODUCTIMAGE) droidcore: $(INSTALLED_QEMU_PRODUCTIMAGE) endif endif # ----------------------------------------------------------------- # The emulator package ifeq ($(BUILD_EMULATOR),true) INTERNAL_EMULATOR_PACKAGE_FILES += \ $(HOST_OUT_EXECUTABLES)/emulator$(HOST_EXECUTABLE_SUFFIX) \ prebuilts/qemu-kernel/$(TARGET_ARCH)/kernel-qemu \ $(INSTALLED_RAMDISK_TARGET) \ $(INSTALLED_SYSTEMIMAGE) \ $(INSTALLED_USERDATAIMAGE_TARGET) name := $(TARGET_PRODUCT)-emulator-$(FILE_NAME_TAG) INTERNAL_EMULATOR_PACKAGE_TARGET := $(PRODUCT_OUT)/$(name).zip $(INTERNAL_EMULATOR_PACKAGE_TARGET): $(INTERNAL_EMULATOR_PACKAGE_FILES) @echo "Package: $@" $(hide) zip -qjX $@ $(INTERNAL_EMULATOR_PACKAGE_FILES) endif # ----------------------------------------------------------------- # Old PDK stuffs, retired # The pdk package (Platform Development Kit) #ifneq (,$(filter pdk,$(MAKECMDGOALS))) # include development/pdk/Pdk.mk #endif # ----------------------------------------------------------------- # The SDK # The SDK includes host-specific components, so it belongs under HOST_OUT. sdk_dir := $(HOST_OUT)/sdk/$(TARGET_PRODUCT) # Build a name that looks like: # # linux-x86 --> android-sdk_12345_linux-x86 # darwin-x86 --> android-sdk_12345_mac-x86 # windows-x86 --> android-sdk_12345_windows # sdk_name := android-sdk_$(FILE_NAME_TAG) ifeq ($(HOST_OS),darwin) INTERNAL_SDK_HOST_OS_NAME := mac else INTERNAL_SDK_HOST_OS_NAME := $(HOST_OS) endif ifneq ($(HOST_OS),windows) INTERNAL_SDK_HOST_OS_NAME := $(INTERNAL_SDK_HOST_OS_NAME)-$(SDK_HOST_ARCH) endif sdk_name := $(sdk_name)_$(INTERNAL_SDK_HOST_OS_NAME) sdk_dep_file := $(sdk_dir)/sdk_deps.mk ATREE_FILES := -include $(sdk_dep_file) # if we don't have a real list, then use "everything" ifeq ($(strip $(ATREE_FILES)),) ATREE_FILES := \ $(ALL_DEFAULT_INSTALLED_MODULES) \ $(INSTALLED_RAMDISK_TARGET) \ $(ALL_DOCS) \ $(ALL_SDK_FILES) endif atree_dir := development/build sdk_atree_files := \ $(atree_dir)/sdk.exclude.atree \ $(atree_dir)/sdk-$(HOST_OS)-$(SDK_HOST_ARCH).atree # development/build/sdk-android-.atree is used to differentiate # between architecture models (e.g. ARMv5TE versus ARMv7) when copying # files like the kernel image. We use TARGET_CPU_ABI because we don't # have a better way to distinguish between CPU models. ifneq (,$(strip $(wildcard $(atree_dir)/sdk-android-$(TARGET_CPU_ABI).atree))) sdk_atree_files += $(atree_dir)/sdk-android-$(TARGET_CPU_ABI).atree endif ifneq ($(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SDK_ATREE_FILES),) sdk_atree_files += $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SDK_ATREE_FILES) else sdk_atree_files += $(atree_dir)/sdk.atree endif include $(BUILD_SYSTEM)/sdk_font.mk deps := \ $(target_notice_file_txt) \ $(tools_notice_file_txt) \ $(OUT_DOCS)/offline-sdk-timestamp \ $(SYMBOLS_ZIP) \ $(COVERAGE_ZIP) \ $(INSTALLED_SYSTEMIMAGE) \ $(INSTALLED_QEMU_SYSTEMIMAGE) \ $(INSTALLED_QEMU_VENDORIMAGE) \ $(INSTALLED_USERDATAIMAGE_TARGET) \ $(INSTALLED_RAMDISK_TARGET) \ $(INSTALLED_SDK_BUILD_PROP_TARGET) \ $(INSTALLED_BUILD_PROP_TARGET) \ $(ATREE_FILES) \ $(sdk_atree_files) \ $(HOST_OUT_EXECUTABLES)/atree \ $(HOST_OUT_EXECUTABLES)/line_endings \ $(SDK_FONT_DEPS) INTERNAL_SDK_TARGET := $(sdk_dir)/$(sdk_name).zip $(INTERNAL_SDK_TARGET): PRIVATE_NAME := $(sdk_name) $(INTERNAL_SDK_TARGET): PRIVATE_DIR := $(sdk_dir)/$(sdk_name) $(INTERNAL_SDK_TARGET): PRIVATE_DEP_FILE := $(sdk_dep_file) $(INTERNAL_SDK_TARGET): PRIVATE_INPUT_FILES := $(sdk_atree_files) # Set SDK_GNU_ERROR to non-empty to fail when a GNU target is built. # #SDK_GNU_ERROR := true $(INTERNAL_SDK_TARGET): $(deps) @echo "Package SDK: $@" $(hide) rm -rf $(PRIVATE_DIR) $@ $(hide) for f in $(target_gnu_MODULES); do \ if [ -f $$f ]; then \ echo SDK: $(if $(SDK_GNU_ERROR),ERROR:,warning:) \ including GNU target $$f >&2; \ FAIL=$(SDK_GNU_ERROR); \ fi; \ done; \ if [ $$FAIL ]; then exit 1; fi $(hide) echo $(notdir $(SDK_FONT_DEPS)) | tr " " "\n" > $(SDK_FONT_TEMP)/fontsInSdk.txt $(hide) ( \ ATREE_STRIP="strip -x" \ $(HOST_OUT_EXECUTABLES)/atree \ $(addprefix -f ,$(PRIVATE_INPUT_FILES)) \ -m $(PRIVATE_DEP_FILE) \ -I . \ -I $(PRODUCT_OUT) \ -I $(HOST_OUT) \ -I $(TARGET_COMMON_OUT_ROOT) \ -v "PLATFORM_NAME=android-$(PLATFORM_VERSION)" \ -v "OUT_DIR=$(OUT_DIR)" \ -v "HOST_OUT=$(HOST_OUT)" \ -v "TARGET_ARCH=$(TARGET_ARCH)" \ -v "TARGET_CPU_ABI=$(TARGET_CPU_ABI)" \ -v "DLL_EXTENSION=$(HOST_SHLIB_SUFFIX)" \ -v "FONT_OUT=$(SDK_FONT_TEMP)" \ -o $(PRIVATE_DIR) && \ cp -f $(target_notice_file_txt) \ $(PRIVATE_DIR)/system-images/android-$(PLATFORM_VERSION)/$(TARGET_CPU_ABI)/NOTICE.txt && \ cp -f $(tools_notice_file_txt) $(PRIVATE_DIR)/platform-tools/NOTICE.txt && \ HOST_OUT_EXECUTABLES=$(HOST_OUT_EXECUTABLES) HOST_OS=$(HOST_OS) \ development/build/tools/sdk_clean.sh $(PRIVATE_DIR) && \ chmod -R ug+rwX $(PRIVATE_DIR) && \ cd $(dir $@) && zip -rqX $(notdir $@) $(PRIVATE_NAME) \ ) || ( rm -rf $(PRIVATE_DIR) $@ && exit 44 ) # Is a Windows SDK requested? If so, we need some definitions from here # in order to find the Linux SDK used to create the Windows one. MAIN_SDK_NAME := $(sdk_name) MAIN_SDK_DIR := $(sdk_dir) MAIN_SDK_ZIP := $(INTERNAL_SDK_TARGET) ifneq ($(filter win_sdk winsdk-tools,$(MAKECMDGOALS)),) include $(TOPDIR)development/build/tools/windows_sdk.mk endif # ----------------------------------------------------------------- # Findbugs INTERNAL_FINDBUGS_XML_TARGET := $(PRODUCT_OUT)/findbugs.xml INTERNAL_FINDBUGS_HTML_TARGET := $(PRODUCT_OUT)/findbugs.html $(INTERNAL_FINDBUGS_XML_TARGET): $(ALL_FINDBUGS_FILES) @echo UnionBugs: $@ $(hide) $(FINDBUGS_DIR)/unionBugs $(ALL_FINDBUGS_FILES) \ > $@ $(INTERNAL_FINDBUGS_HTML_TARGET): $(INTERNAL_FINDBUGS_XML_TARGET) @echo ConvertXmlToText: $@ $(hide) $(FINDBUGS_DIR)/convertXmlToText -html:fancy.xsl \ $(INTERNAL_FINDBUGS_XML_TARGET) > $@ # ----------------------------------------------------------------- # Findbugs # ----------------------------------------------------------------- # These are some additional build tasks that need to be run. ifneq ($(dont_bother),true) include $(sort $(wildcard $(BUILD_SYSTEM)/tasks/*.mk)) -include $(sort $(wildcard vendor/*/build/tasks/*.mk)) -include $(sort $(wildcard device/*/build/tasks/*.mk)) -include $(sort $(wildcard product/*/build/tasks/*.mk)) # Also the project-specific tasks -include $(sort $(wildcard vendor/*/*/build/tasks/*.mk)) -include $(sort $(wildcard device/*/*/build/tasks/*.mk)) -include $(sort $(wildcard product/*/*/build/tasks/*.mk)) # Also add test specifc tasks include $(sort $(wildcard platform_testing/build/tasks/*.mk)) include $(sort $(wildcard test/vts/tools/build/tasks/*.mk)) endif include $(BUILD_SYSTEM)/product-graph.mk # ----------------------------------------------------------------- # Create SDK repository packages. Must be done after tasks/* since # we need the addon rules defined. ifneq ($(sdk_repo_goal),) include $(TOPDIR)development/build/tools/sdk_repo.mk endif #------------------------------------------------------------------ # Find lsdump paths FIND_LSDUMPS_FILE := $(PRODUCT_OUT)/lsdump_paths.txt $(FIND_LSDUMPS_FILE) : $(LSDUMP_PATHS) $(hide) rm -rf $@ && echo "$^" > $@