# Only use ANDROID_BUILD_SHELL to wrap around bash. # DO NOT use other shells such as zsh. ifdef ANDROID_BUILD_SHELL SHELL := $(ANDROID_BUILD_SHELL) else # Use bash, not whatever shell somebody has installed as /bin/sh # This is repeated in config.mk, since envsetup.sh runs that file # directly. SHELL := /bin/bash endif # this turns off the suffix rules built into make .SUFFIXES: # If a rule fails, delete $@. .DELETE_ON_ERROR: # Figure out where we are. #TOP := $(dir $(word $(words $(MAKEFILE_LIST)),$(MAKEFILE_LIST))) #TOP := $(patsubst %/,%,$(TOP)) # TOPDIR is the normal variable you should use, because # if we are executing relative to the current directory # it can be "", whereas TOP must be "." which causes # pattern matching probles when make strips off the # trailing "./" from paths in various places. #ifeq ($(TOP),.) #TOPDIR := #else #TOPDIR := $(TOP)/ #endif # check for broken versions of make ifeq (0,$(shell expr $$(echo $(MAKE_VERSION) | sed "s/[^0-9\.].*//") \>= 3.81)) $(warning ********************************************************************************) $(warning * You are using version $(MAKE_VERSION) of make.) $(warning * You must upgrade to version 3.81 or greater.) $(warning * see http://source.android.com/source/download.html) $(warning ********************************************************************************) $(error stopping) endif TOP := . TOPDIR := BUILD_SYSTEM := $(TOPDIR)build/core # This is the default target. It must be the first declared target. .PHONY: droid DEFAULT_GOAL := droid $(DEFAULT_GOAL): # Used to force goals to build. Only use for conditionally defined goals. .PHONY: FORCE FORCE: # Set up various standard variables based on configuration # and host information. include $(BUILD_SYSTEM)/config.mk # This allows us to force a clean build - included after the config.make # environment setup is done, but before we generate any dependencies. This # file does the rm -rf inline so the deps which are all done below will # be generated correctly include $(BUILD_SYSTEM)/cleanbuild.mk VERSION_CHECK_SEQUENCE_NUMBER := 2 -include $(OUT_DIR)/versions_checked.mk ifneq ($(VERSION_CHECK_SEQUENCE_NUMBER),$(VERSIONS_CHECKED)) $(info Checking build tools versions...) ifeq ($(BUILD_OS),linux) build_arch := $(shell uname -m) ifneq (64,$(findstring 64,$(build_arch))) $(warning ************************************************************) $(warning You are attempting to build on a 32-bit system.) $(warning Only 64-bit build environments are supported now.) $(warning ************************************************************) $(error stop) endif endif ifneq ($(HOST_OS),windows) ifneq ($(HOST_OS)-$(HOST_ARCH),darwin-ppc) # check for a case sensitive file system ifneq (a,$(shell mkdir -p $(OUT_DIR) ; \ echo a > $(OUT_DIR)/casecheck.txt; \ echo B > $(OUT_DIR)/CaseCheck.txt; \ cat $(OUT_DIR)/casecheck.txt)) $(warning ************************************************************) $(warning You are building on a case-insensitive filesystem.) $(warning Please move your source tree to a case-sensitive filesystem.) $(warning ************************************************************) $(error Case-insensitive filesystems not supported) endif endif endif # Make sure that there are no spaces in the absolute path; the # build system can't deal with them. ifneq ($(words $(shell pwd)),1) $(warning ************************************************************) $(warning You are building in a directory whose absolute path contains) $(warning a space character:) $(warning $(space)) $(warning "$(shell pwd)") $(warning $(space)) $(warning Please move your source tree to a path that does not contain) $(warning any spaces.) $(warning ************************************************************) $(error Directory names containing spaces not supported) endif # Check for the correct version of java java_version := $(shell java -version 2>&1 | head -n 1 | grep '[ "]1\.6[\. "$$]') ifeq ($(strip $(java_version)),) $(info ************************************************************) $(info You are attempting to build with the incorrect version) $(info of java.) $(info $(space)) $(info Your version is: $(shell java -version 2>&1 | head -n 1).) $(info The correct version is: 1.6.) $(info $(space)) $(info Please follow the machine setup instructions at) $(info $(space)$(space)$(space)$(space)http://source.android.com/source/download.html) $(info ************************************************************) $(error stop) endif # Check for the correct version of javac javac_version := $(shell javac -version 2>&1 | head -n 1 | grep '[ "]1\.6[\. "$$]') ifeq ($(strip $(javac_version)),) $(info ************************************************************) $(info You are attempting to build with the incorrect version) $(info of javac.) $(info $(space)) $(info Your version is: $(shell javac -version 2>&1 | head -n 1).) $(info The correct version is: 1.6.) $(info $(space)) $(info Please follow the machine setup instructions at) $(info $(space)$(space)$(space)$(space)http://source.android.com/source/download.html) $(info ************************************************************) $(error stop) endif $(shell echo 'VERSIONS_CHECKED := $(VERSION_CHECK_SEQUENCE_NUMBER)' \ > $(OUT_DIR)/versions_checked.mk) endif # These are the modifier targets that don't do anything themselves, but # change the behavior of the build. # (must be defined before including definitions.make) INTERNAL_MODIFIER_TARGETS := showcommands checkbuild # Bring in standard build system definitions. include $(BUILD_SYSTEM)/definitions.mk ifneq ($(filter eng user userdebug tests,$(MAKECMDGOALS)),) $(info ***************************************************************) $(info ***************************************************************) $(info Don't pass '$(filter eng user userdebug tests,$(MAKECMDGOALS))' on \ the make command line.) # XXX The single quote on this line fixes gvim's syntax highlighting. # Without which, the rest of this file is impossible to read. $(info Set TARGET_BUILD_VARIANT in buildspec.mk, or use lunch or) $(info choosecombo.) $(info ***************************************************************) $(info ***************************************************************) $(error stopping) endif ifneq ($(filter-out $(INTERNAL_VALID_VARIANTS),$(TARGET_BUILD_VARIANT)),) $(info ***************************************************************) $(info ***************************************************************) $(info Invalid variant: $(TARGET_BUILD_VARIANT) $(info Valid values are: $(INTERNAL_VALID_VARIANTS) $(info ***************************************************************) $(info ***************************************************************) $(error stopping) endif ### ### In this section we set up the things that are different ### between the build variants ### is_sdk_build := ifneq ($(filter sdk,$(MAKECMDGOALS)),) is_sdk_build := true endif ifneq ($(filter win_sdk,$(MAKECMDGOALS)),) is_sdk_build := true endif ifneq ($(filter sdk_addon,$(MAKECMDGOALS)),) is_sdk_build := true endif ## user/userdebug ## user_variant := $(filter userdebug user,$(TARGET_BUILD_VARIANT)) enable_target_debugging := true ifneq (,$(user_variant)) # Target is secure in user builds. ADDITIONAL_DEFAULT_PROPERTIES += ro.secure=1 tags_to_install := user ifeq ($(user_variant),userdebug) # Pick up some extra useful tools tags_to_install += debug # Enable Dalvik lock contention logging for userdebug builds. ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.lockprof.threshold=500 else # Disable debugging in plain user builds. enable_target_debugging := endif # TODO: Always set WITH_DEXPREOPT (for user builds) once it works on OSX. # Also, remove the corresponding block in config/product_config.make. ifeq ($(HOST_OS)-$(WITH_DEXPREOPT_buildbot),linux-true) WITH_DEXPREOPT := true endif # Disallow mock locations by default for user builds ADDITIONAL_DEFAULT_PROPERTIES += ro.allow.mock.location=0 else # !user_variant # Turn on checkjni for non-user builds. ADDITIONAL_BUILD_PROPERTIES += ro.kernel.android.checkjni=1 # Set device insecure for non-user builds. ADDITIONAL_DEFAULT_PROPERTIES += ro.secure=0 # Allow mock locations by default for non user builds ADDITIONAL_DEFAULT_PROPERTIES += ro.allow.mock.location=1 endif # !user_variant ifeq (true,$(strip $(enable_target_debugging))) # Target is more debuggable and adbd is on by default ADDITIONAL_DEFAULT_PROPERTIES += ro.debuggable=1 persist.service.adb.enable=1 # Include the debugging/testing OTA keys in this build. INCLUDE_TEST_OTA_KEYS := true else # !enable_target_debugging # Target is less debuggable and adbd is off by default ADDITIONAL_DEFAULT_PROPERTIES += ro.debuggable=0 persist.service.adb.enable=0 endif # !enable_target_debugging ## eng ## ifeq ($(TARGET_BUILD_VARIANT),eng) tags_to_install := user debug eng # Don't require the setup wizard on eng builds ADDITIONAL_BUILD_PROPERTIES := $(filter-out ro.setupwizard.mode=%,\ $(call collapse-pairs, $(ADDITIONAL_BUILD_PROPERTIES))) \ ro.setupwizard.mode=OPTIONAL endif ## tests ## ifeq ($(TARGET_BUILD_VARIANT),tests) tags_to_install := user debug eng tests endif ## sdk ## ifdef is_sdk_build ifneq ($(words $(filter-out $(INTERNAL_MODIFIER_TARGETS),$(MAKECMDGOALS))),1) $(error The 'sdk' target may not be specified with any other targets) endif # TODO: this should be eng I think. Since the sdk is built from the eng # variant. tags_to_install := user debug eng ADDITIONAL_BUILD_PROPERTIES += xmpp.auto-presence=true ADDITIONAL_BUILD_PROPERTIES += ro.config.nocheckin=yes else # !sdk endif ## precise GC ## ifneq ($(filter dalvik.gc.type-precise,$(PRODUCT_TAGS)),) # Enabling type-precise GC results in larger optimized DEX files. The # additional storage requirements for ".odex" files can cause /system # to overflow on some devices, so this is configured separately for # each product. ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.dexopt-flags=m=y endif ifeq (,$(TARGET_BUILD_APPS)) # Install an apns-conf.xml file if one's not already being installed. ifeq (,$(filter %:system/etc/apns-conf.xml, $(PRODUCT_COPY_FILES))) PRODUCT_COPY_FILES += \ development/data/etc/apns-conf_sdk.xml:system/etc/apns-conf.xml ifeq ($(filter eng tests,$(TARGET_BUILD_VARIANT)),) $(warning implicitly installing apns-conf_sdk.xml) endif endif # If we're on an eng or tests build, but not on the sdk, and we have # a better one, use that instead. ifneq ($(filter eng tests,$(TARGET_BUILD_VARIANT)),) ifndef is_sdk_build apns_to_use := $(wildcard vendor/google/etc/apns-conf.xml) ifneq ($(strip $(apns_to_use)),) PRODUCT_COPY_FILES := \ $(filter-out %:system/etc/apns-conf.xml,$(PRODUCT_COPY_FILES)) \ $(strip $(apns_to_use)):system/etc/apns-conf.xml endif endif endif endif # !TARGET_BUILD_APPS ADDITIONAL_BUILD_PROPERTIES += net.bt.name=Android # enable vm tracing in files for now to help track # the cause of ANRs in the content process ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.stack-trace-file=/data/anr/traces.txt # ------------------------------------------------------------ # Define a function that, given a list of module tags, returns # non-empty if that module should be installed in /system. # For most goals, anything not tagged with the "tests" tag should # be installed in /system. define should-install-to-system $(if $(filter tests,$(1)),,true) endef ifdef is_sdk_build # For the sdk goal, anything with the "samples" tag should be # installed in /data even if that module also has "eng"/"debug"/"user". define should-install-to-system $(if $(filter samples tests,$(1)),,true) endef endif # If they only used the modifier goals (showcommands, checkbuild), we'll actually # build the default target. ifeq ($(filter-out $(INTERNAL_MODIFIER_TARGETS),$(MAKECMDGOALS)),) .PHONY: $(INTERNAL_MODIFIER_TARGETS) $(INTERNAL_MODIFIER_TARGETS): $(DEFAULT_GOAL) endif # These targets are going to delete stuff, don't bother including # the whole directory tree if that's all we're going to do ifeq ($(MAKECMDGOALS),clean) dont_bother := true endif ifeq ($(MAKECMDGOALS),clobber) dont_bother := true endif ifeq ($(MAKECMDGOALS),dataclean) dont_bother := true endif ifeq ($(MAKECMDGOALS),installclean) dont_bother := true endif # Bring in all modules that need to be built. ifneq ($(dont_bother),true) ifeq ($(HOST_OS)-$(HOST_ARCH),darwin-ppc) SDK_ONLY := true $(info Building the SDK under darwin-ppc is actually obsolete and unsupported.) $(error stop) endif ifeq ($(HOST_OS),windows) SDK_ONLY := true endif ifeq ($(SDK_ONLY),true) # ----- SDK for Windows ------ # These configure the build targets that are available for the SDK under Windows. # The first section defines all the C/C++ tools that can be compiled in C/C++, # the second section defines all the Java ones (assuming javac is available.) subdirs := \ prebuilt \ build/libs/host \ build/tools/zipalign \ dalvik/dexdump \ dalvik/libdex \ dalvik/tools/dmtracedump \ dalvik/tools/hprof-conv \ development/tools/line_endings \ development/tools/etc1tool \ sdk/emulator/mksdcard \ sdk/sdklauncher \ development/host \ external/expat \ external/libpng \ external/qemu \ external/sqlite/dist \ external/zlib \ frameworks/base \ system/core/adb \ system/core/fastboot \ system/core/libcutils \ system/core/liblog \ system/core/libzipfile # The following can only be built if "javac" is available. # This check is used when building parts of the SDK under Cygwin. ifneq (,$(shell which javac 2>/dev/null)) subdirs += \ build/tools/signapk \ dalvik/dx \ libcore \ sdk/archquery \ sdk/androidprefs \ sdk/apkbuilder \ sdk/jarutils \ sdk/layoutlib_api \ sdk/layoutlib_utils \ sdk/ninepatch \ sdk/sdkstats \ sdk/sdkmanager \ sdk/layoutopt \ sdk/ddms \ development/apps \ development/tools/mkstubs \ packages else $(warning SDK_ONLY: javac not available.) endif # Exclude tools/acp when cross-compiling windows under linux ifeq ($(findstring Linux,$(UNAME)),) subdirs += build/tools/acp endif else # !SDK_ONLY ifeq ($(BUILD_TINY_ANDROID), true) # TINY_ANDROID is a super-minimal build configuration, handy for board # bringup and very low level debugging subdirs := \ bionic \ system/core \ build/libs \ build/target \ build/tools/acp \ build/tools/apriori \ build/tools/kcm \ build/tools/soslim \ external/elfcopy \ external/elfutils \ external/yaffs2 \ external/zlib else # !BUILD_TINY_ANDROID # # Typical build; include any Android.mk files we can find. # subdirs := $(TOP) FULL_BUILD := true endif # !BUILD_TINY_ANDROID endif # !SDK_ONLY ifneq ($(ONE_SHOT_MAKEFILE),) # We've probably been invoked by the "mm" shell function # with a subdirectory's makefile. include $(ONE_SHOT_MAKEFILE) # Change CUSTOM_MODULES to include only modules that were # defined by this makefile; this will install all of those # modules as a side-effect. Do this after including ONE_SHOT_MAKEFILE # so that the modules will be installed in the same place they # would have been with a normal make. CUSTOM_MODULES := $(sort $(call get-tagged-modules,$(ALL_MODULE_TAGS))) FULL_BUILD := # Stub out the notice targets, which probably aren't defined # when using ONE_SHOT_MAKEFILE. NOTICE-HOST-%: ; NOTICE-TARGET-%: ; else # ONE_SHOT_MAKEFILE # # Include all of the makefiles in the system # # Can't use first-makefiles-under here because # --mindepth=2 makes the prunes not work. subdir_makefiles := \ $(shell build/tools/findleaves.py --prune=out --prune=.repo --prune=.git $(subdirs) Android.mk) include $(subdir_makefiles) endif # ONE_SHOT_MAKEFILE # ------------------------------------------------------------------- # All module makefiles have been included at this point. # ------------------------------------------------------------------- # ------------------------------------------------------------------- # Include any makefiles that must happen after the module makefiles # have been included. # TODO: have these files register themselves via a global var rather # than hard-coding the list here. ifdef FULL_BUILD # Only include this during a full build, otherwise we can't be # guaranteed that any policies were included. -include frameworks/policies/base/PolicyConfig.mk endif # ------------------------------------------------------------------- # Fix up CUSTOM_MODULES to refer to installed files rather than # just bare module names. Leave unknown modules alone in case # they're actually full paths to a particular file. known_custom_modules := $(filter $(ALL_MODULES),$(CUSTOM_MODULES)) unknown_custom_modules := $(filter-out $(ALL_MODULES),$(CUSTOM_MODULES)) CUSTOM_MODULES := \ $(call module-installed-files,$(known_custom_modules)) \ $(unknown_custom_modules) # ------------------------------------------------------------------- # Define dependencies for modules that require other modules. # This can only happen now, after we've read in all module makefiles. # # TODO: deal with the fact that a bare module name isn't # unambiguous enough. Maybe declare short targets like # APPS:Quake or HOST:SHARED_LIBRARIES:libutils. # BUG: the system image won't know to depend on modules that are # brought in as requirements of other modules. define add-required-deps $(1): $(2) endef $(foreach m,$(ALL_MODULES), \ $(eval r := $(ALL_MODULES.$(m).REQUIRED)) \ $(if $(r), \ $(eval r := $(call module-installed-files,$(r))) \ $(eval $(call add-required-deps,$(ALL_MODULES.$(m).INSTALLED),$(r))) \ ) \ ) m := r := add-required-deps := # ------------------------------------------------------------------- # Figure out our module sets. # Of the modules defined by the component makefiles, # determine what we actually want to build. Default_MODULES := $(sort $(ALL_DEFAULT_INSTALLED_MODULES) \ $(CUSTOM_MODULES)) # TODO: Remove the 3 places in the tree that use # ALL_DEFAULT_INSTALLED_MODULES and get rid of it from this list. ifdef FULL_BUILD # The base list of modules to build for this product is specified # by the appropriate product definition file, which was included # by product_config.make. user_PACKAGES := $(call module-installed-files, \ $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PACKAGES)) ifeq (0,1) $(info user packages for $(TARGET_DEVICE) ($(INTERNAL_PRODUCT)):) $(foreach p,$(user_PACKAGES),$(info : $(p))) $(error done) endif else # We're not doing a full build, and are probably only including # a subset of the module makefiles. Don't try to build any modules # requested by the product, because we probably won't have rules # to build them. user_PACKAGES := endif # Use tags to get the non-APPS user modules. Use the product # definition files to get the APPS user modules. user_MODULES := $(sort $(call get-tagged-modules,user)) user_MODULES := $(user_MODULES) $(user_PACKAGES) eng_MODULES := $(sort $(call get-tagged-modules,eng)) debug_MODULES := $(sort $(call get-tagged-modules,debug)) tests_MODULES := $(sort $(call get-tagged-modules,tests)) ifeq ($(strip $(tags_to_install)),) $(error ASSERTION FAILED: tags_to_install should not be empty) endif modules_to_install := $(sort $(Default_MODULES) \ $(foreach tag,$(tags_to_install),$($(tag)_MODULES))) # Some packages may override others using LOCAL_OVERRIDES_PACKAGES. # Filter out (do not install) any overridden packages. overridden_packages := $(call get-package-overrides,$(modules_to_install)) ifdef overridden_packages # old_modules_to_install := $(modules_to_install) modules_to_install := \ $(filter-out $(foreach p,$(overridden_packages),$(p) %/$(p).apk), \ $(modules_to_install)) endif #$(error filtered out # $(filter-out $(modules_to_install),$(old_modules_to_install))) # Don't include any GNU targets in the SDK. It's ok (and necessary) # to build the host tools, but nothing that's going to be installed # on the target (including static libraries). ifdef is_sdk_build target_gnu_MODULES := \ $(filter \ $(TARGET_OUT_INTERMEDIATES)/% \ $(TARGET_OUT)/% \ $(TARGET_OUT_DATA)/%, \ $(sort $(call get-tagged-modules,gnu))) $(info Removing from sdk:)$(foreach d,$(target_gnu_MODULES),$(info : $(d))) modules_to_install := \ $(filter-out $(target_gnu_MODULES),$(modules_to_install)) endif # build/core/Makefile contains extra stuff that we don't want to pollute this # top-level makefile with. It expects that ALL_DEFAULT_INSTALLED_MODULES # contains everything that's built during the current make, but it also further # extends ALL_DEFAULT_INSTALLED_MODULES. ALL_DEFAULT_INSTALLED_MODULES := $(modules_to_install) include $(BUILD_SYSTEM)/Makefile modules_to_install := $(sort $(ALL_DEFAULT_INSTALLED_MODULES)) ALL_DEFAULT_INSTALLED_MODULES := endif # dont_bother # These are additional goals that we build, in order to make sure that there # is as little code as possible in the tree that doesn't build. modules_to_check := $(foreach m,$(ALL_MODULES),$(ALL_MODULES.$(m).CHECKED)) # If you would like to build all goals, and not skip any intermediate # steps, you can pass the "all" modifier goal on the commandline. ifneq ($(filter all,$(MAKECMDGOALS)),) modules_to_check += $(foreach m,$(ALL_MODULES),$(ALL_MODULES.$(m).BUILT)) endif # for easier debugging modules_to_check := $(sort $(modules_to_check)) #$(error modules_to_check $(modules_to_check)) # ------------------------------------------------------------------- # This is used to to get the ordering right, you can also use these, # but they're considered undocumented, so don't complain if their # behavior changes. .PHONY: prebuilt prebuilt: $(ALL_PREBUILT) # An internal target that depends on all copied headers # (see copy_headers.make). Other targets that need the # headers to be copied first can depend on this target. .PHONY: all_copied_headers all_copied_headers: ; $(ALL_C_CPP_ETC_OBJECTS): | all_copied_headers # All the droid stuff, in directories .PHONY: files files: prebuilt \ $(modules_to_install) \ $(modules_to_check) \ $(INSTALLED_ANDROID_INFO_TXT_TARGET) # ------------------------------------------------------------------- .PHONY: checkbuild checkbuild: $(modules_to_check) .PHONY: ramdisk ramdisk: $(INSTALLED_RAMDISK_TARGET) .PHONY: systemtarball systemtarball: $(INSTALLED_SYSTEMTARBALL_TARGET) .PHONY: boottarball boottarball: $(INSTALLED_BOOTTARBALL_TARGET) .PHONY: userdataimage userdataimage: $(INSTALLED_USERDATAIMAGE_TARGET) .PHONY: userdatatarball userdatatarball: $(INSTALLED_USERDATATARBALL_TARGET) .PHONY: bootimage bootimage: $(INSTALLED_BOOTIMAGE_TARGET) ifeq ($(BUILD_TINY_ANDROID), true) INSTALLED_RECOVERYIMAGE_TARGET := endif # Build files and then package it into the rom formats .PHONY: droidcore droidcore: files \ systemimage \ $(INSTALLED_BOOTIMAGE_TARGET) \ $(INSTALLED_RECOVERYIMAGE_TARGET) \ $(INSTALLED_USERDATAIMAGE_TARGET) \ $(INSTALLED_FILES_FILE) # dist_libraries only for putting your library into the dist directory with a full build. .PHONY: dist_libraries ifeq ($(EMMA_INSTRUMENT),true) $(call dist-for-goals, droid, $(EMMA_META_ZIP)) endif # Dist for droid if droid is among the cmd goals, or no cmd goal is given. ifneq ($(filter droid,$(MAKECMDGOALS))$(filter ||,|$(filter-out $(INTERNAL_MODIFIER_TARGETS),$(MAKECMDGOALS))|),) ifneq ($(TARGET_BUILD_APPS),) # If this build is just for apps, only build apps and not the full system by default. unbundled_build_modules := ifneq ($(filter all,$(TARGET_BUILD_APPS)),) # If they used the magic goal "all" then build all apps in the source tree. unbundled_build_modules := $(foreach m,$(sort $(ALL_MODULES)),$(if $(filter APPS,$(ALL_MODULES.$(m).CLASS)),$(m))) else unbundled_build_modules := $(TARGET_BUILD_APPS) endif # dist the unbundled app. $(call dist-for-goals,apps_only, \ $(foreach m,$(unbundled_build_modules),$(ALL_MODULES.$(m).INSTALLED)) \ ) .PHONY: apps_only apps_only: $(unbundled_build_modules) droid: apps_only else # TARGET_BUILD_APPS $(call dist-for-goals, droidcore, \ $(INTERNAL_UPDATE_PACKAGE_TARGET) \ $(INTERNAL_OTA_PACKAGE_TARGET) \ $(SYMBOLS_ZIP) \ $(APPS_ZIP) \ $(INTERNAL_EMULATOR_PACKAGE_TARGET) \ $(PACKAGE_STATS_FILE) \ $(INSTALLED_FILES_FILE) \ $(INSTALLED_BUILD_PROP_TARGET) \ $(BUILT_TARGET_FILES_PACKAGE) \ $(INSTALLED_ANDROID_INFO_TXT_TARGET) \ $(INSTALLED_RAMDISK_TARGET) \ ) # Tests are installed in userdata.img. If we're building the tests # variant, copy it for "make tests dist". Also copy a zip of the # contents of userdata.img, so that people can easily extract a # single .apk. ifeq ($(TARGET_BUILD_VARIANT),tests) $(call dist-for-goals, droid, \ $(INSTALLED_USERDATAIMAGE_TARGET) \ $(BUILT_TESTS_ZIP_PACKAGE) \ ) endif # Building a full system-- the default is to build droidcore droid: droidcore dist_libraries endif # TARGET_BUILD_APPS endif # droid in $(MAKECMDGOALS) .PHONY: droid tests tests: droidcore .PHONY: docs docs: $(ALL_DOCS) .PHONY: sdk ALL_SDK_TARGETS := $(INTERNAL_SDK_TARGET) sdk: $(ALL_SDK_TARGETS) ifneq ($(filter sdk,$(MAKECMDGOALS)),) $(call dist-for-goals,sdk, \ $(ALL_SDK_TARGETS) \ $(SYMBOLS_ZIP) \ ) endif .PHONY: samplecode sample_MODULES := $(sort $(call get-tagged-modules,samples)) sample_APKS_DEST_PATH := $(TARGET_COMMON_OUT_ROOT)/samples sample_APKS_COLLECTION := \ $(foreach module,$(sample_MODULES),$(sample_APKS_DEST_PATH)/$(notdir $(module))) $(foreach module,$(sample_MODULES),$(eval $(call \ copy-one-file,$(module),$(sample_APKS_DEST_PATH)/$(notdir $(module))))) sample_ADDITIONAL_INSTALLED := \ $(filter-out $(modules_to_install) $(modules_to_check) $(ALL_PREBUILT),$(sample_MODULES)) samplecode: $(sample_APKS_COLLECTION) @echo "Collect sample code apks: $^" # remove apks that are not intended to be installed. rm -f $(sample_ADDITIONAL_INSTALLED) .PHONY: findbugs findbugs: $(INTERNAL_FINDBUGS_HTML_TARGET) $(INTERNAL_FINDBUGS_XML_TARGET) .PHONY: clean dirs_to_clean := \ $(PRODUCT_OUT) \ $(TARGET_COMMON_OUT_ROOT) \ $(HOST_OUT) \ $(HOST_COMMON_OUT_ROOT) clean: @for dir in $(dirs_to_clean) ; do \ echo "Cleaning $$dir..."; \ rm -rf $$dir; \ done @echo "Clean."; \ .PHONY: clobber clobber: @rm -rf $(OUT_DIR) @echo "Entire build directory removed." # The rules for dataclean and installclean are defined in cleanbuild.mk. #xxx scrape this from ALL_MODULE_NAME_TAGS .PHONY: modules modules: @echo "Available sub-modules:" @echo "$(call module-names-for-tag-list,$(ALL_MODULE_TAGS))" | \ tr -s ' ' '\n' | sort -u | $(COLUMN) .PHONY: showcommands showcommands: @echo >/dev/null