0013f55ef4
The two new debugging images adds additional files based on
boot.img and ramdisk.img/ramdisk-recovery.img, respectively.
File /force_debuggable is to trigger special logic in /init to load an
userdebug version of sepolicy and an additional property file from this
ramdisk to allow adb root, if the device is unlocked.
It's intentional to skip signing for boot-debug.img, as it can
only be used if the device is unlocked, where verification error
is allowed.
Those debugging images allows adb root on user build
system.img, vendor.img, product.img, etc. This can facilitate more
automated testings on user builds and is helpful to narrow down the
delta between what's being tested v.s. what's being shipped.
Bug: 126493225
Test: `make dist`, checks both boot-debug.img and ramdisk-debug.img
are in $OUT/ and out/dist.
Test: `make dist`, checks installed-files-ramdisk-debug.{json,txt} are
in out/dist.
Test: `system/core/mkbootimg/unpack_bootimg.py --boot_img $OUT/boot-debug.img`,
checks the extracted out/ramdisk is as expected
Test: Run `gunzip -c ramdisk | cpio -idm` for the ramdisk extracted from
$OUT/boot-debug.img and $OUT/boot.img, respectively.
Then compare the root dirs of both, e.g.,
`diff -rq --no-dereference ./ramdisk ./ramdisk-debug`
Test: `make ramdisk_debug-nodeps` and `make bootimage_debug-nodeps`
Change-Id: I30137c3caef91805d9143d404e5e4d06c0fccc30
1198 lines
49 KiB
Makefile
1198 lines
49 KiB
Makefile
# This is included by the top-level Makefile.
|
|
# It sets up standard variables based on the
|
|
# current configuration and platform, which
|
|
# are not specific to what is being built.
|
|
|
|
ifndef KATI
|
|
$(warning Directly using config.mk from make is no longer supported.)
|
|
$(warning )
|
|
$(warning If you are just attempting to build, you probably need to re-source envsetup.sh:)
|
|
$(warning )
|
|
$(warning $$ source build/envsetup.sh)
|
|
$(warning )
|
|
$(warning If you are attempting to emulate get_build_var, use one of the following:)
|
|
$(warning $$ build/soong/soong_ui.bash --dumpvar-mode)
|
|
$(warning $$ build/soong/soong_ui.bash --dumpvars-mode)
|
|
$(warning )
|
|
$(error done)
|
|
endif
|
|
|
|
BUILD_SYSTEM :=$= build/make/core
|
|
BUILD_SYSTEM_COMMON :=$= build/make/common
|
|
|
|
include $(BUILD_SYSTEM_COMMON)/core.mk
|
|
|
|
# Mark variables that should be coming as environment variables from soong_ui
|
|
# as readonly
|
|
.KATI_READONLY := OUT_DIR TMPDIR BUILD_DATETIME_FILE
|
|
ifdef CALLED_FROM_SETUP
|
|
.KATI_READONLY := CALLED_FROM_SETUP
|
|
endif
|
|
ifdef KATI_PACKAGE_MK_DIR
|
|
.KATI_READONLY := KATI_PACKAGE_MK_DIR
|
|
endif
|
|
|
|
# Mark variables deprecated/obsolete
|
|
CHANGES_URL := https://android.googlesource.com/platform/build/+/master/Changes.md
|
|
.KATI_READONLY := CHANGES_URL
|
|
$(KATI_obsolete_var PATH,Do not use PATH directly. See $(CHANGES_URL)#PATH)
|
|
$(KATI_obsolete_var PYTHONPATH,Do not use PYTHONPATH directly. See $(CHANGES_URL)#PYTHONPATH)
|
|
$(KATI_obsolete_var OUT,Use OUT_DIR instead. See $(CHANGES_URL)#OUT)
|
|
$(KATI_obsolete_var ANDROID_HOST_OUT,Use HOST_OUT instead. See $(CHANGES_URL)#ANDROID_HOST_OUT)
|
|
$(KATI_obsolete_var ANDROID_PRODUCT_OUT,Use PRODUCT_OUT instead. See $(CHANGES_URL)#ANDROID_PRODUCT_OUT)
|
|
$(KATI_obsolete_var ANDROID_HOST_OUT_TESTCASES,Use HOST_OUT_TESTCASES instead. See $(CHANGES_URL)#ANDROID_HOST_OUT_TESTCASES)
|
|
$(KATI_obsolete_var ANDROID_TARGET_OUT_TESTCASES,Use TARGET_OUT_TESTCASES instead. See $(CHANGES_URL)#ANDROID_TARGET_OUT_TESTCASES)
|
|
$(KATI_obsolete_var ANDROID_BUILD_TOP,Use '.' instead. See $(CHANGES_URL)#ANDROID_BUILD_TOP)
|
|
$(KATI_obsolete_var \
|
|
ANDROID_TOOLCHAIN \
|
|
ANDROID_TOOLCHAIN_2ND_ARCH \
|
|
ANDROID_DEV_SCRIPTS \
|
|
ANDROID_EMULATOR_PREBUILTS \
|
|
ANDROID_PRE_BUILD_PATHS \
|
|
,See $(CHANGES_URL)#other_envsetup_variables)
|
|
$(KATI_obsolete_var PRODUCT_COMPATIBILITY_MATRIX_LEVEL_OVERRIDE,Set FCM Version in device manifest instead. See $(CHANGES_URL)#PRODUCT_COMPATIBILITY_MATRIX_LEVEL_OVERRIDE)
|
|
$(KATI_obsolete_var USE_CLANG_PLATFORM_BUILD,Clang is the only supported Android compiler. See $(CHANGES_URL)#USE_CLANG_PLATFORM_BUILD)
|
|
$(KATI_obsolete_var BUILD_DROIDDOC,Droiddoc is only supported in Soong. See details on build/soong/java/droiddoc.go)
|
|
$(KATI_obsolete_var BUILD_APIDIFF,Apidiff is only supported in Soong. See details on build/soong/java/droiddoc.go)
|
|
$(KATI_obsolete_var \
|
|
DEFAULT_GCC_CPP_STD_VERSION \
|
|
HOST_GLOBAL_CFLAGS 2ND_HOST_GLOBAL_CFLAGS \
|
|
HOST_GLOBAL_CONLYFLAGS 2ND_HOST_GLOBAL_CONLYFLAGS \
|
|
HOST_GLOBAL_CPPFLAGS 2ND_HOST_GLOBAL_CPPFLAGS \
|
|
HOST_GLOBAL_LDFLAGS 2ND_HOST_GLOBAL_LDFLAGS \
|
|
HOST_GLOBAL_LLDFLAGS 2ND_HOST_GLOBAL_LLDFLAGS \
|
|
HOST_CLANG_SUPPORTED 2ND_HOST_CLANG_SUPPORTED \
|
|
HOST_CC 2ND_HOST_CC \
|
|
HOST_CXX 2ND_HOST_CXX \
|
|
HOST_CROSS_GLOBAL_CFLAGS 2ND_HOST_CROSS_GLOBAL_CFLAGS \
|
|
HOST_CROSS_GLOBAL_CONLYFLAGS 2ND_HOST_CROSS_GLOBAL_CONLYFLAGS \
|
|
HOST_CROSS_GLOBAL_CPPFLAGS 2ND_HOST_CROSS_GLOBAL_CPPFLAGS \
|
|
HOST_CROSS_GLOBAL_LDFLAGS 2ND_HOST_CROSS_GLOBAL_LDFLAGS \
|
|
HOST_CROSS_GLOBAL_LLDFLAGS 2ND_HOST_CROSS_GLOBAL_LLDFLAGS \
|
|
HOST_CROSS_CLANG_SUPPORTED 2ND_HOST_CROSS_CLANG_SUPPORTED \
|
|
HOST_CROSS_CC 2ND_HOST_CROSS_CC \
|
|
HOST_CROSS_CXX 2ND_HOST_CROSS_CXX \
|
|
TARGET_GLOBAL_CFLAGS 2ND_TARGET_GLOBAL_CFLAGS \
|
|
TARGET_GLOBAL_CONLYFLAGS 2ND_TARGET_GLOBAL_CONLYFLAGS \
|
|
TARGET_GLOBAL_CPPFLAGS 2ND_TARGET_GLOBAL_CPPFLAGS \
|
|
TARGET_GLOBAL_LDFLAGS 2ND_TARGET_GLOBAL_LDFLAGS \
|
|
TARGET_GLOBAL_LLDFLAGS 2ND_TARGET_GLOBAL_LLDFLAGS \
|
|
TARGET_CLANG_SUPPORTED 2ND_TARGET_CLANG_SUPPORTED \
|
|
TARGET_CC 2ND_TARGET_CC \
|
|
TARGET_CXX 2ND_TARGET_CXX \
|
|
TARGET_TOOLCHAIN_ROOT 2ND_TARGET_TOOLCHAIN_ROOT \
|
|
HOST_TOOLCHAIN_ROOT 2ND_HOST_TOOLCHAIN_ROOT \
|
|
HOST_CROSS_TOOLCHAIN_ROOT 2ND_HOST_CROSS_TOOLCHAIN_ROOT \
|
|
HOST_TOOLS_PREFIX 2ND_HOST_TOOLS_PREFIX \
|
|
HOST_CROSS_TOOLS_PREFIX 2ND_HOST_CROSS_TOOLS_PREFIX \
|
|
HOST_GCC_VERSION 2ND_HOST_GCC_VERSION \
|
|
HOST_CROSS_GCC_VERSION 2ND_HOST_CROSS_GCC_VERSION \
|
|
TARGET_NDK_GCC_VERSION 2ND_TARGET_NDK_GCC_VERSION \
|
|
GLOBAL_CFLAGS_NO_OVERRIDE GLOBAL_CPPFLAGS_NO_OVERRIDE \
|
|
,GCC support has been removed. Use Clang instead)
|
|
$(KATI_obsolete_var DIST_DIR dist_goal,Use dist-for-goals instead. See $(CHANGES_URL)#dist)
|
|
$(KATI_obsolete_var TARGET_ANDROID_FILESYSTEM_CONFIG_H,Use TARGET_FS_CONFIG_GEN instead)
|
|
$(KATI_deprecated_var USER,Use BUILD_USERNAME instead. See $(CHANGES_URL)#USER)
|
|
$(KATI_obsolete_var TARGET_ROOT_OUT_SBIN,/sbin has been removed, use /system/bin instead)
|
|
$(KATI_obsolete_var TARGET_ROOT_OUT_SBIN_UNSTRIPPED,/sbin has been removed, use /system/bin instead)
|
|
$(KATI_obsolete_var BUILD_BROKEN_PHONY_TARGETS)
|
|
$(KATI_obsolete_var BUILD_BROKEN_DUP_COPY_HEADERS)
|
|
|
|
# This is marked as obsolete in envsetup.mk after reading the BoardConfig.mk
|
|
$(KATI_deprecate_export It is a global setting. See $(CHANGES_URL)#export_keyword)
|
|
|
|
# Used to force goals to build. Only use for conditionally defined goals.
|
|
.PHONY: FORCE
|
|
FORCE:
|
|
|
|
ORIGINAL_MAKECMDGOALS := $(MAKECMDGOALS)
|
|
|
|
UNAME := $(shell uname -sm)
|
|
|
|
SRC_TARGET_DIR := $(TOPDIR)build/make/target
|
|
|
|
# Some specific paths to tools
|
|
SRC_DROIDDOC_DIR := $(TOPDIR)build/make/tools/droiddoc
|
|
|
|
# Mark some inputs as readonly
|
|
ifdef TARGET_DEVICE_DIR
|
|
.KATI_READONLY := TARGET_DEVICE_DIR
|
|
endif
|
|
|
|
# Set up efficient math functions which are used in make.
|
|
# Here since this file is included by envsetup as well as during build.
|
|
include $(BUILD_SYSTEM_COMMON)/math.mk
|
|
|
|
include $(BUILD_SYSTEM_COMMON)/strings.mk
|
|
|
|
include $(BUILD_SYSTEM_COMMON)/json.mk
|
|
|
|
# Various mappings to avoid hard-coding paths all over the place
|
|
include $(BUILD_SYSTEM)/pathmap.mk
|
|
|
|
# Allow projects to define their own globally-available variables
|
|
include $(BUILD_SYSTEM)/project_definitions.mk
|
|
|
|
# ###############################################################
|
|
# Build system internal files
|
|
# ###############################################################
|
|
|
|
BUILD_COMBOS :=$= $(BUILD_SYSTEM)/combo
|
|
|
|
CLEAR_VARS :=$= $(BUILD_SYSTEM)/clear_vars.mk
|
|
|
|
BUILD_HOST_STATIC_LIBRARY :=$= $(BUILD_SYSTEM)/host_static_library.mk
|
|
BUILD_HOST_SHARED_LIBRARY :=$= $(BUILD_SYSTEM)/host_shared_library.mk
|
|
BUILD_STATIC_LIBRARY :=$= $(BUILD_SYSTEM)/static_library.mk
|
|
BUILD_HEADER_LIBRARY :=$= $(BUILD_SYSTEM)/header_library.mk
|
|
BUILD_AUX_STATIC_LIBRARY :=$= $(BUILD_SYSTEM)/aux_static_library.mk
|
|
BUILD_AUX_EXECUTABLE :=$= $(BUILD_SYSTEM)/aux_executable.mk
|
|
BUILD_SHARED_LIBRARY :=$= $(BUILD_SYSTEM)/shared_library.mk
|
|
BUILD_EXECUTABLE :=$= $(BUILD_SYSTEM)/executable.mk
|
|
BUILD_HOST_EXECUTABLE :=$= $(BUILD_SYSTEM)/host_executable.mk
|
|
BUILD_PACKAGE :=$= $(BUILD_SYSTEM)/package.mk
|
|
BUILD_PHONY_PACKAGE :=$= $(BUILD_SYSTEM)/phony_package.mk
|
|
BUILD_RRO_PACKAGE :=$= $(BUILD_SYSTEM)/build_rro_package.mk
|
|
BUILD_HOST_PREBUILT :=$= $(BUILD_SYSTEM)/host_prebuilt.mk
|
|
BUILD_PREBUILT :=$= $(BUILD_SYSTEM)/prebuilt.mk
|
|
BUILD_MULTI_PREBUILT :=$= $(BUILD_SYSTEM)/multi_prebuilt.mk
|
|
BUILD_JAVA_LIBRARY :=$= $(BUILD_SYSTEM)/java_library.mk
|
|
BUILD_STATIC_JAVA_LIBRARY :=$= $(BUILD_SYSTEM)/static_java_library.mk
|
|
BUILD_HOST_JAVA_LIBRARY :=$= $(BUILD_SYSTEM)/host_java_library.mk
|
|
BUILD_COPY_HEADERS :=$= $(BUILD_SYSTEM)/copy_headers.mk
|
|
BUILD_NATIVE_TEST :=$= $(BUILD_SYSTEM)/native_test.mk
|
|
BUILD_NATIVE_BENCHMARK :=$= $(BUILD_SYSTEM)/native_benchmark.mk
|
|
BUILD_HOST_NATIVE_TEST :=$= $(BUILD_SYSTEM)/host_native_test.mk
|
|
BUILD_FUZZ_TEST :=$= $(BUILD_SYSTEM)/fuzz_test.mk
|
|
BUILD_HOST_FUZZ_TEST :=$= $(BUILD_SYSTEM)/host_fuzz_test.mk
|
|
|
|
BUILD_SHARED_TEST_LIBRARY :=$= $(BUILD_SYSTEM)/shared_test_lib.mk
|
|
BUILD_HOST_SHARED_TEST_LIBRARY :=$= $(BUILD_SYSTEM)/host_shared_test_lib.mk
|
|
BUILD_STATIC_TEST_LIBRARY :=$= $(BUILD_SYSTEM)/static_test_lib.mk
|
|
BUILD_HOST_STATIC_TEST_LIBRARY :=$= $(BUILD_SYSTEM)/host_static_test_lib.mk
|
|
|
|
BUILD_NOTICE_FILE :=$= $(BUILD_SYSTEM)/notice_files.mk
|
|
BUILD_HOST_DALVIK_JAVA_LIBRARY :=$= $(BUILD_SYSTEM)/host_dalvik_java_library.mk
|
|
BUILD_HOST_DALVIK_STATIC_JAVA_LIBRARY :=$= $(BUILD_SYSTEM)/host_dalvik_static_java_library.mk
|
|
|
|
BUILD_HOST_TEST_CONFIG :=$= $(BUILD_SYSTEM)/host_test_config.mk
|
|
BUILD_TARGET_TEST_CONFIG :=$= $(BUILD_SYSTEM)/target_test_config.mk
|
|
|
|
include $(BUILD_SYSTEM)/deprecation.mk
|
|
|
|
# ###############################################################
|
|
# Parse out any modifier targets.
|
|
# ###############################################################
|
|
|
|
hide := @
|
|
|
|
################################################################
|
|
# Tools needed in product configuration makefiles.
|
|
################################################################
|
|
NORMALIZE_PATH := build/make/tools/normalize_path.py
|
|
|
|
# $(1): the paths to be normalized
|
|
define normalize-paths
|
|
$(if $(1),$(shell $(NORMALIZE_PATH) $(1)))
|
|
endef
|
|
|
|
# ###############################################################
|
|
# Set common values
|
|
# ###############################################################
|
|
|
|
# Initialize SOONG_CONFIG_NAMESPACES so that it isn't recursive.
|
|
SOONG_CONFIG_NAMESPACES :=
|
|
|
|
# Set the extensions used for various packages
|
|
COMMON_PACKAGE_SUFFIX := .zip
|
|
COMMON_JAVA_PACKAGE_SUFFIX := .jar
|
|
COMMON_ANDROID_PACKAGE_SUFFIX := .apk
|
|
|
|
ifdef TMPDIR
|
|
JAVA_TMPDIR_ARG := -Djava.io.tmpdir=$(TMPDIR)
|
|
else
|
|
JAVA_TMPDIR_ARG :=
|
|
endif
|
|
|
|
# ###############################################################
|
|
# Include sub-configuration files
|
|
# ###############################################################
|
|
|
|
# ---------------------------------------------------------------
|
|
# Try to include buildspec.mk, which will try to set stuff up.
|
|
# If this file doesn't exist, the environment variables will
|
|
# be used, and if that doesn't work, then the default is an
|
|
# arm build
|
|
ifndef ANDROID_BUILDSPEC
|
|
ANDROID_BUILDSPEC := $(TOPDIR)buildspec.mk
|
|
endif
|
|
-include $(ANDROID_BUILDSPEC)
|
|
|
|
# ---------------------------------------------------------------
|
|
# Define most of the global variables. These are the ones that
|
|
# are specific to the user's build configuration.
|
|
include $(BUILD_SYSTEM)/envsetup.mk
|
|
|
|
# Pruned directory options used when using findleaves.py
|
|
# See envsetup.mk for a description of SCAN_EXCLUDE_DIRS
|
|
FIND_LEAVES_EXCLUDES := $(addprefix --prune=, $(SCAN_EXCLUDE_DIRS) .repo .git)
|
|
|
|
# The build system exposes several variables for where to find the kernel
|
|
# headers:
|
|
# TARGET_DEVICE_KERNEL_HEADERS is automatically created for the current
|
|
# device being built. It is set as $(TARGET_DEVICE_DIR)/kernel-headers,
|
|
# e.g. device/samsung/tuna/kernel-headers. This directory is not
|
|
# explicitly set by anyone, the build system always adds this subdir.
|
|
#
|
|
# TARGET_BOARD_KERNEL_HEADERS is specified by the BoardConfig.mk file
|
|
# to allow other directories to be included. This is useful if there's
|
|
# some common place where a few headers are being kept for a group
|
|
# of devices. For example, device/<vendor>/common/kernel-headers could
|
|
# contain some headers for several of <vendor>'s devices.
|
|
#
|
|
# TARGET_PRODUCT_KERNEL_HEADERS is generated by the product inheritance
|
|
# graph. This allows architecture products to provide headers for the
|
|
# devices using that architecture. For example,
|
|
# hardware/ti/omap4xxx/omap4.mk will specify
|
|
# PRODUCT_VENDOR_KERNEL_HEADERS variable that specify where the omap4
|
|
# specific headers are, e.g. hardware/ti/omap4xxx/kernel-headers.
|
|
# The build system then combines all the values specified by all the
|
|
# PRODUCT_VENDOR_KERNEL_HEADERS directives in the product inheritance
|
|
# tree and then exports a TARGET_PRODUCT_KERNEL_HEADERS variable.
|
|
#
|
|
# The layout of subdirs in any of the kernel-headers dir should mirror the
|
|
# layout of the kernel include/ directory. For example,
|
|
# device/samsung/tuna/kernel-headers/linux/,
|
|
# hardware/ti/omap4xxx/kernel-headers/media/,
|
|
# etc.
|
|
#
|
|
# NOTE: These directories MUST contain post-processed headers using the
|
|
# bionic/libc/kernel/tools/clean_header.py tool. Additionally, the original
|
|
# kernel headers must also be checked in, but in a different subdirectory. By
|
|
# convention, the originals should be checked into original-kernel-headers
|
|
# directory of the same parent dir. For example,
|
|
# device/samsung/tuna/kernel-headers <----- post-processed
|
|
# device/samsung/tuna/original-kernel-headers <----- originals
|
|
#
|
|
TARGET_DEVICE_KERNEL_HEADERS := $(strip $(wildcard $(TARGET_DEVICE_DIR)/kernel-headers))
|
|
|
|
define validate-kernel-headers
|
|
$(if $(firstword $(foreach hdr_dir,$(1),\
|
|
$(filter-out kernel-headers,$(notdir $(hdr_dir))))),\
|
|
$(error Kernel header dirs must be end in kernel-headers: $(1)))
|
|
endef
|
|
# also allow the board config to provide additional directories since
|
|
# there could be device/oem/base_hw and device/oem/derived_hw
|
|
# that both are valid devices but derived_hw needs to use kernel headers
|
|
# from base_hw.
|
|
TARGET_BOARD_KERNEL_HEADERS := $(strip $(wildcard $(TARGET_BOARD_KERNEL_HEADERS)))
|
|
TARGET_BOARD_KERNEL_HEADERS := $(patsubst %/,%,$(TARGET_BOARD_KERNEL_HEADERS))
|
|
$(call validate-kernel-headers,$(TARGET_BOARD_KERNEL_HEADERS))
|
|
|
|
# then add product-inherited includes, to allow for
|
|
# hardware/sivendor/chip/chip.mk to include their own headers
|
|
TARGET_PRODUCT_KERNEL_HEADERS := $(strip $(wildcard $(PRODUCT_VENDOR_KERNEL_HEADERS)))
|
|
TARGET_PRODUCT_KERNEL_HEADERS := $(patsubst %/,%,$(TARGET_PRODUCT_KERNEL_HEADERS))
|
|
$(call validate-kernel-headers,$(TARGET_PRODUCT_KERNEL_HEADERS))
|
|
.KATI_READONLY := TARGET_DEVICE_KERNEL_HEADERS TARGET_BOARD_KERNEL_HEADERS TARGET_PRODUCT_KERNEL_HEADERS
|
|
|
|
# Commands to generate .toc file common to ELF .so files.
|
|
define _gen_toc_command_for_elf
|
|
$(hide) ($($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)READELF) -d $(1) | grep SONAME || echo "No SONAME for $1") > $(2)
|
|
$(hide) $($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)READELF) --dyn-syms $(1) | awk '{$$2=""; $$3=""; print}' >> $(2)
|
|
endef
|
|
|
|
# Commands to generate .toc file from Darwin dynamic library.
|
|
define _gen_toc_command_for_macho
|
|
$(hide) $(HOST_OTOOL) -l $(1) | grep LC_ID_DYLIB -A 5 > $(2)
|
|
$(hide) $(HOST_NM) -gP $(1) | cut -f1-2 -d" " | (grep -v U$$ >> $(2) || true)
|
|
endef
|
|
|
|
ifeq ($(CALLED_FROM_SETUP),true)
|
|
include $(BUILD_SYSTEM)/ccache.mk
|
|
include $(BUILD_SYSTEM)/goma.mk
|
|
endif
|
|
|
|
ifdef TARGET_PREFER_32_BIT
|
|
TARGET_PREFER_32_BIT_APPS := true
|
|
TARGET_PREFER_32_BIT_EXECUTABLES := true
|
|
endif
|
|
|
|
# GCC version selection
|
|
TARGET_GCC_VERSION := 4.9
|
|
ifdef TARGET_2ND_ARCH
|
|
2ND_TARGET_GCC_VERSION := 4.9
|
|
endif
|
|
|
|
# Normalize WITH_STATIC_ANALYZER
|
|
ifeq ($(strip $(WITH_STATIC_ANALYZER)),0)
|
|
WITH_STATIC_ANALYZER :=
|
|
endif
|
|
|
|
# Unset WITH_TIDY_ONLY if global WITH_TIDY_ONLY is not true nor 1.
|
|
ifeq (,$(filter 1 true,$(WITH_TIDY_ONLY)))
|
|
WITH_TIDY_ONLY :=
|
|
endif
|
|
|
|
# Pick a Java compiler.
|
|
include $(BUILD_SYSTEM)/combo/javac.mk
|
|
|
|
# ---------------------------------------------------------------
|
|
# Check that the configuration is current. We check that
|
|
# BUILD_ENV_SEQUENCE_NUMBER is current against this value.
|
|
# Don't fail if we're called from envsetup, so they have a
|
|
# chance to update their environment.
|
|
|
|
ifeq (,$(strip $(CALLED_FROM_SETUP)))
|
|
ifneq (,$(strip $(BUILD_ENV_SEQUENCE_NUMBER)))
|
|
ifneq ($(BUILD_ENV_SEQUENCE_NUMBER),$(CORRECT_BUILD_ENV_SEQUENCE_NUMBER))
|
|
$(warning BUILD_ENV_SEQUENCE_NUMBER is set incorrectly.)
|
|
$(info *** If you use envsetup/lunch/choosecombo:)
|
|
$(info *** - Re-execute envsetup (". envsetup.sh"))
|
|
$(info *** - Re-run lunch or choosecombo)
|
|
$(info *** If you use buildspec.mk:)
|
|
$(info *** - Look at buildspec.mk.default to see what has changed)
|
|
$(info *** - Update BUILD_ENV_SEQUENCE_NUMBER to "$(CORRECT_BUILD_ENV_SEQUENCE_NUMBER)")
|
|
$(error bailing..)
|
|
endif
|
|
endif
|
|
endif
|
|
|
|
# Set up PDK so we can use TARGET_BUILD_PDK to select prebuilt tools below
|
|
.PHONY: pdk fusion
|
|
pdk fusion: $(DEFAULT_GOAL)
|
|
|
|
# What to build:
|
|
# pdk fusion if:
|
|
# 1) PDK_FUSION_PLATFORM_ZIP / PDK_FUSION_PLATFORM_DIR is passed in from the environment
|
|
# or
|
|
# 2) the platform.zip / pdk.mk exists in the default location
|
|
# or
|
|
# 3) fusion is a command line build goal,
|
|
# PDK_FUSION_PLATFORM_ZIP is needed anyway, then do we need the 'fusion' goal?
|
|
# otherwise pdk only if:
|
|
# 1) pdk is a command line build goal
|
|
# or
|
|
# 2) TARGET_BUILD_PDK is passed in from the environment
|
|
|
|
# if PDK_FUSION_PLATFORM_ZIP or PDK_FUSION_PLATFORM_DIR is specified, do not override.
|
|
ifeq (,$(strip $(PDK_FUSION_PLATFORM_ZIP)$(PDK_FUSION_PLATFORM_DIR)))
|
|
# Most PDK project paths should be using vendor/pdk/TARGET_DEVICE
|
|
# but some legacy ones (e.g. mini_armv7a_neon generic PDK) were setup
|
|
# with vendor/pdk/TARGET_PRODUCT.
|
|
# Others are set up with vendor/pdk/TARGET_DEVICE/TARGET_DEVICE-userdebug
|
|
_pdk_fusion_search_paths := \
|
|
vendor/pdk/$(TARGET_DEVICE)/$(TARGET_DEVICE)-$(TARGET_BUILD_VARIANT)/platform \
|
|
vendor/pdk/$(TARGET_DEVICE)/$(TARGET_PRODUCT)-$(TARGET_BUILD_VARIANT)/platform \
|
|
vendor/pdk/$(TARGET_DEVICE)/$(patsubst aosp_%,full_%,$(TARGET_PRODUCT))-$(TARGET_BUILD_VARIANT)/platform \
|
|
vendor/pdk/$(TARGET_PRODUCT)/$(TARGET_PRODUCT)-$(TARGET_BUILD_VARIANT)/platform \
|
|
vendor/pdk/$(TARGET_PRODUCT)/$(patsubst aosp_%,full_%,$(TARGET_PRODUCT))-$(TARGET_BUILD_VARIANT)/platform
|
|
|
|
_pdk_fusion_default_platform_zip := $(strip $(foreach p,$(_pdk_fusion_search_paths),$(wildcard $(p)/platform.zip)))
|
|
ifneq (,$(_pdk_fusion_default_platform_zip))
|
|
PDK_FUSION_PLATFORM_ZIP := $(word 1, $(_pdk_fusion_default_platform_zip))
|
|
_pdk_fusion_default_platform_zip :=
|
|
else
|
|
_pdk_fusion_default_platform_mk := $(strip $(foreach p,$(_pdk_fusion_search_paths),$(wildcard $(p)/pdk.mk)))
|
|
ifneq (,$(_pdk_fusion_default_platform_mk))
|
|
PDK_FUSION_PLATFORM_DIR := $(dir $(word 1,$(_pdk_fusion_default_platform_mk)))
|
|
_pdk_fusion_default_platform_mk :=
|
|
endif
|
|
endif # _pdk_fusion_default_platform_zip
|
|
_pdk_fusion_search_paths :=
|
|
endif # !PDK_FUSION_PLATFORM_ZIP && !PDK_FUSION_PLATFORM_DIR
|
|
|
|
ifneq (,$(PDK_FUSION_PLATFORM_ZIP))
|
|
ifneq (,$(PDK_FUSION_PLATFORM_DIR))
|
|
$(error Only one of PDK_FUSION_PLATFORM_ZIP or PDK_FUSION_PLATFORM_DIR may be specified)
|
|
endif
|
|
endif
|
|
|
|
ifneq (,$(filter pdk fusion, $(MAKECMDGOALS)))
|
|
TARGET_BUILD_PDK := true
|
|
ifneq (,$(filter fusion, $(MAKECMDGOALS)))
|
|
ifeq (,$(strip $(PDK_FUSION_PLATFORM_ZIP)$(PDK_FUSION_PLATFORM_DIR)))
|
|
$(error Specify PDK_FUSION_PLATFORM_ZIP or PDK_FUSION_PLATFORM_DIR to do a PDK fusion.)
|
|
endif
|
|
endif # fusion
|
|
endif # pdk or fusion
|
|
|
|
ifdef PDK_FUSION_PLATFORM_ZIP
|
|
TARGET_BUILD_PDK := true
|
|
ifeq (,$(wildcard $(PDK_FUSION_PLATFORM_ZIP)))
|
|
ifneq (,$(wildcard $(patsubst %.zip,%,$(PDK_FUSION_PLATFORM_ZIP))/pdk.mk))
|
|
PDK_FUSION_PLATFORM_DIR := $(patsubst %.zip,%,$(PDK_FUSION_PLATFORM_ZIP))
|
|
PDK_FUSION_PLATFORM_ZIP :=
|
|
else
|
|
$(error Cannot find file $(PDK_FUSION_PLATFORM_ZIP).)
|
|
endif
|
|
endif
|
|
endif
|
|
|
|
ifdef PDK_FUSION_PLATFORM_DIR
|
|
TARGET_BUILD_PDK := true
|
|
ifeq (,$(wildcard $(PDK_FUSION_PLATFORM_DIR)/pdk.mk))
|
|
$(error Cannot find file $(PDK_FUSION_PLATFORM_DIR)/pdk.mk.)
|
|
endif
|
|
endif
|
|
|
|
BUILD_PLATFORM_ZIP := $(filter platform platform-java,$(MAKECMDGOALS))
|
|
|
|
# ---------------------------------------------------------------
|
|
# Whether we can expect a full build graph
|
|
ALLOW_MISSING_DEPENDENCIES := $(filter true,$(ALLOW_MISSING_DEPENDENCIES))
|
|
ifneq ($(TARGET_BUILD_APPS),)
|
|
ALLOW_MISSING_DEPENDENCIES := true
|
|
endif
|
|
ifeq ($(TARGET_BUILD_PDK),true)
|
|
ALLOW_MISSING_DEPENDENCIES := true
|
|
endif
|
|
ifneq ($(filter true,$(SOONG_ALLOW_MISSING_DEPENDENCIES)),)
|
|
ALLOW_MISSING_DEPENDENCIES := true
|
|
endif
|
|
ifneq ($(ONE_SHOT_MAKEFILE),)
|
|
ALLOW_MISSING_DEPENDENCIES := true
|
|
endif
|
|
.KATI_READONLY := ALLOW_MISSING_DEPENDENCIES
|
|
|
|
TARGET_BUILD_APPS_USE_PREBUILT_SDK :=
|
|
ifdef TARGET_BUILD_APPS
|
|
ifndef UNBUNDLED_BUILD_SDKS_FROM_SOURCE
|
|
TARGET_BUILD_APPS_USE_PREBUILT_SDK := true
|
|
endif
|
|
endif
|
|
|
|
prebuilt_sdk_tools := prebuilts/sdk/tools
|
|
prebuilt_sdk_tools_bin := $(prebuilt_sdk_tools)/$(HOST_OS)/bin
|
|
|
|
# Always use prebuilts for ckati and makeparallel
|
|
prebuilt_build_tools := prebuilts/build-tools
|
|
prebuilt_build_tools_wrappers := prebuilts/build-tools/common/bin
|
|
prebuilt_build_tools_jars := prebuilts/build-tools/common/framework
|
|
prebuilt_build_tools_bin_noasan := $(prebuilt_build_tools)/$(HOST_PREBUILT_TAG)/bin
|
|
ifeq ($(filter address,$(SANITIZE_HOST)),)
|
|
prebuilt_build_tools_bin := $(prebuilt_build_tools_bin_noasan)
|
|
else
|
|
prebuilt_build_tools_bin := $(prebuilt_build_tools)/$(HOST_PREBUILT_TAG)/asan/bin
|
|
endif
|
|
|
|
USE_PREBUILT_SDK_TOOLS_IN_PLACE := true
|
|
|
|
# Work around for b/68406220
|
|
# This should match the soong version.
|
|
USE_D8 := true
|
|
.KATI_READONLY := USE_D8
|
|
|
|
#
|
|
# Tools that are prebuilts for TARGET_BUILD_APPS
|
|
#
|
|
ifeq (,$(TARGET_BUILD_APPS)$(filter true,$(TARGET_BUILD_PDK)))
|
|
AIDL := $(HOST_OUT_EXECUTABLES)/aidl
|
|
AAPT := $(HOST_OUT_EXECUTABLES)/aapt
|
|
AAPT2 := $(HOST_OUT_EXECUTABLES)/aapt2
|
|
MAINDEXCLASSES := $(HOST_OUT_EXECUTABLES)/mainDexClasses
|
|
SIGNAPK_JAR := $(HOST_OUT_JAVA_LIBRARIES)/signapk$(COMMON_JAVA_PACKAGE_SUFFIX)
|
|
SIGNAPK_JNI_LIBRARY_PATH := $(HOST_OUT_SHARED_LIBRARIES)
|
|
ZIPALIGN := $(HOST_OUT_EXECUTABLES)/zipalign
|
|
|
|
else # TARGET_BUILD_APPS || TARGET_BUILD_PDK
|
|
AIDL := $(prebuilt_build_tools_bin)/aidl
|
|
AAPT := $(prebuilt_sdk_tools_bin)/aapt
|
|
AAPT2 := $(prebuilt_sdk_tools_bin)/aapt2
|
|
MAINDEXCLASSES := $(prebuilt_sdk_tools)/mainDexClasses
|
|
SIGNAPK_JAR := $(prebuilt_sdk_tools)/lib/signapk$(COMMON_JAVA_PACKAGE_SUFFIX)
|
|
SIGNAPK_JNI_LIBRARY_PATH := $(prebuilt_sdk_tools)/$(HOST_OS)/lib64
|
|
ZIPALIGN := $(prebuilt_build_tools_bin)/zipalign
|
|
endif # TARGET_BUILD_APPS || TARGET_BUILD_PDK
|
|
|
|
ifeq (,$(TARGET_BUILD_APPS))
|
|
# Use RenderScript prebuilts for unbundled builds but not PDK builds
|
|
LLVM_RS_CC := $(HOST_OUT_EXECUTABLES)/llvm-rs-cc
|
|
BCC_COMPAT := $(HOST_OUT_EXECUTABLES)/bcc_compat
|
|
else
|
|
LLVM_RS_CC := $(prebuilt_sdk_tools_bin)/llvm-rs-cc
|
|
BCC_COMPAT := $(prebuilt_sdk_tools_bin)/bcc_compat
|
|
endif # TARGET_BUILD_PDK
|
|
|
|
prebuilt_sdk_tools :=
|
|
prebuilt_sdk_tools_bin :=
|
|
|
|
ACP := $(prebuilt_build_tools_bin)/acp
|
|
CKATI := $(prebuilt_build_tools_bin)/ckati
|
|
DEPMOD := $(HOST_OUT_EXECUTABLES)/depmod
|
|
FILESLIST := $(SOONG_HOST_OUT_EXECUTABLES)/fileslist
|
|
HOST_INIT_VERIFIER := $(HOST_OUT_EXECUTABLES)/host_init_verifier
|
|
MAKEPARALLEL := $(prebuilt_build_tools_bin)/makeparallel
|
|
SOONG_JAVAC_WRAPPER := $(SOONG_HOST_OUT_EXECUTABLES)/soong_javac_wrapper
|
|
SOONG_ZIP := $(SOONG_HOST_OUT_EXECUTABLES)/soong_zip
|
|
MERGE_ZIPS := $(SOONG_HOST_OUT_EXECUTABLES)/merge_zips
|
|
XMLLINT := $(SOONG_HOST_OUT_EXECUTABLES)/xmllint
|
|
ZIP2ZIP := $(SOONG_HOST_OUT_EXECUTABLES)/zip2zip
|
|
ZIPTIME := $(prebuilt_build_tools_bin)/ziptime
|
|
|
|
# ---------------------------------------------------------------
|
|
# Generic tools.
|
|
|
|
LEX := $(prebuilt_build_tools_bin_noasan)/flex
|
|
# The default PKGDATADIR built in the prebuilt bison is a relative path
|
|
# prebuilts/build-tools/common/bison.
|
|
# To run bison from elsewhere you need to set up enviromental variable
|
|
# BISON_PKGDATADIR.
|
|
BISON_PKGDATADIR := $(PWD)/prebuilts/build-tools/common/bison
|
|
BISON := $(prebuilt_build_tools_bin_noasan)/bison
|
|
YACC := $(BISON) -d
|
|
BISON_DATA := $(wildcard $(BISON_PKGDATADIR)/* $(BISON_PKGDATADIR)/*/*)
|
|
|
|
YASM := prebuilts/misc/$(BUILD_OS)-$(HOST_PREBUILT_ARCH)/yasm/yasm
|
|
|
|
DOXYGEN:= doxygen
|
|
ifeq ($(HOST_OS),linux)
|
|
BREAKPAD_DUMP_SYMS := $(HOST_OUT_EXECUTABLES)/dump_syms
|
|
else
|
|
# For non-supported hosts, do not generate breakpad symbols.
|
|
BREAKPAD_GENERATE_SYMBOLS := false
|
|
endif
|
|
PROTOC := $(HOST_OUT_EXECUTABLES)/aprotoc$(HOST_EXECUTABLE_SUFFIX)
|
|
NANOPB_SRCS := $(HOST_OUT_EXECUTABLES)/protoc-gen-nanopb
|
|
VTSC := $(HOST_OUT_EXECUTABLES)/vtsc$(HOST_EXECUTABLE_SUFFIX)
|
|
MKBOOTFS := $(HOST_OUT_EXECUTABLES)/mkbootfs$(HOST_EXECUTABLE_SUFFIX)
|
|
MINIGZIP := $(HOST_OUT_EXECUTABLES)/minigzip$(HOST_EXECUTABLE_SUFFIX)
|
|
BROTLI := $(HOST_OUT_EXECUTABLES)/brotli$(HOST_EXECUTABLE_SUFFIX)
|
|
ifeq (,$(strip $(BOARD_CUSTOM_MKBOOTIMG)))
|
|
MKBOOTIMG := $(HOST_OUT_EXECUTABLES)/mkbootimg$(HOST_EXECUTABLE_SUFFIX)
|
|
else
|
|
MKBOOTIMG := $(BOARD_CUSTOM_MKBOOTIMG)
|
|
endif
|
|
ifeq (,$(strip $(BOARD_CUSTOM_BPTTOOL)))
|
|
BPTTOOL := $(HOST_OUT_EXECUTABLES)/bpttool$(HOST_EXECUTABLE_SUFFIX)
|
|
else
|
|
BPTTOOL := $(BOARD_CUSTOM_BPTTOOL)
|
|
endif
|
|
ifeq (,$(strip $(BOARD_CUSTOM_AVBTOOL)))
|
|
AVBTOOL := $(HOST_OUT_EXECUTABLES)/avbtool$(HOST_EXECUTABLE_SUFFIX)
|
|
else
|
|
AVBTOOL := $(BOARD_CUSTOM_AVBTOOL)
|
|
endif
|
|
APICHECK := $(HOST_OUT_JAVA_LIBRARIES)/metalava$(COMMON_JAVA_PACKAGE_SUFFIX)
|
|
FS_GET_STATS := $(HOST_OUT_EXECUTABLES)/fs_get_stats$(HOST_EXECUTABLE_SUFFIX)
|
|
MAKE_EXT4FS := $(HOST_OUT_EXECUTABLES)/mke2fs$(HOST_EXECUTABLE_SUFFIX)
|
|
MKEXTUSERIMG := $(HOST_OUT_EXECUTABLES)/mkuserimg_mke2fs
|
|
MKE2FS_CONF := system/extras/ext4_utils/mke2fs.conf
|
|
BLK_ALLOC_TO_BASE_FS := $(HOST_OUT_EXECUTABLES)/blk_alloc_to_base_fs$(HOST_EXECUTABLE_SUFFIX)
|
|
MAKE_SQUASHFS := $(HOST_OUT_EXECUTABLES)/mksquashfs$(HOST_EXECUTABLE_SUFFIX)
|
|
MKSQUASHFSUSERIMG := $(HOST_OUT_EXECUTABLES)/mksquashfsimage.sh
|
|
MAKE_F2FS := $(HOST_OUT_EXECUTABLES)/make_f2fs$(HOST_EXECUTABLE_SUFFIX)
|
|
MKF2FSUSERIMG := $(HOST_OUT_EXECUTABLES)/mkf2fsuserimg.sh
|
|
SIMG2IMG := $(HOST_OUT_EXECUTABLES)/simg2img$(HOST_EXECUTABLE_SUFFIX)
|
|
IMG2SIMG := $(HOST_OUT_EXECUTABLES)/img2simg$(HOST_EXECUTABLE_SUFFIX)
|
|
E2FSCK := $(HOST_OUT_EXECUTABLES)/e2fsck$(HOST_EXECUTABLE_SUFFIX)
|
|
MKTARBALL := build/make/tools/mktarball.sh
|
|
TUNE2FS := $(HOST_OUT_EXECUTABLES)/tune2fs$(HOST_EXECUTABLE_SUFFIX)
|
|
JARJAR := $(HOST_OUT_JAVA_LIBRARIES)/jarjar.jar
|
|
DATA_BINDING_COMPILER := $(HOST_OUT_JAVA_LIBRARIES)/databinding-compiler.jar
|
|
FAT16COPY := build/make/tools/fat16copy.py
|
|
CHECK_LINK_TYPE := build/make/tools/check_link_type.py
|
|
CHECK_ELF_FILE := build/make/tools/check_elf_file.py
|
|
LPMAKE := $(HOST_OUT_EXECUTABLES)/lpmake$(HOST_EXECUTABLE_SUFFIX)
|
|
BUILD_SUPER_IMAGE := build/make/tools/releasetools/build_super_image.py
|
|
|
|
PROGUARD_HOME := external/proguard
|
|
PROGUARD := $(PROGUARD_HOME)/bin/proguard.sh
|
|
PROGUARD_DEPS := $(PROGUARD) $(PROGUARD_HOME)/lib/proguard.jar
|
|
JAVATAGS := build/make/tools/java-event-log-tags.py
|
|
MERGETAGS := build/make/tools/merge-event-log-tags.py
|
|
BUILD_IMAGE_SRCS := $(wildcard build/make/tools/releasetools/*.py)
|
|
APPEND2SIMG := $(HOST_OUT_EXECUTABLES)/append2simg
|
|
VERITY_SIGNER := $(HOST_OUT_EXECUTABLES)/verity_signer
|
|
BUILD_VERITY_METADATA := $(HOST_OUT_EXECUTABLES)/build_verity_metadata.py
|
|
BUILD_VERITY_TREE := $(HOST_OUT_EXECUTABLES)/build_verity_tree
|
|
BOOT_SIGNER := $(HOST_OUT_EXECUTABLES)/boot_signer
|
|
FUTILITY := $(HOST_OUT_EXECUTABLES)/futility-host
|
|
VBOOT_SIGNER := prebuilts/misc/scripts/vboot_signer/vboot_signer.sh
|
|
FEC := $(HOST_OUT_EXECUTABLES)/fec
|
|
BRILLO_UPDATE_PAYLOAD := $(HOST_OUT_EXECUTABLES)/brillo_update_payload
|
|
|
|
DEXDUMP := $(HOST_OUT_EXECUTABLES)/dexdump$(BUILD_EXECUTABLE_SUFFIX)
|
|
PROFMAN := $(HOST_OUT_EXECUTABLES)/profman
|
|
|
|
FINDBUGS_DIR := external/owasp/sanitizer/tools/findbugs/bin
|
|
FINDBUGS := $(FINDBUGS_DIR)/findbugs
|
|
|
|
JETIFIER := prebuilts/sdk/tools/jetifier/jetifier-standalone/bin/jetifier-standalone
|
|
|
|
EXTRACT_KERNEL := build/make/tools/extract_kernel.py
|
|
|
|
USE_OPENJDK9 := true
|
|
|
|
ifeq ($(EXPERIMENTAL_USE_OPENJDK9),)
|
|
TARGET_OPENJDK9 :=
|
|
else ifeq ($(EXPERIMENTAL_USE_OPENJDK9),1.8)
|
|
TARGET_OPENJDK9 :=
|
|
else ifeq ($(EXPERIMENTAL_USE_OPENJDK9),true)
|
|
TARGET_OPENJDK9 := true
|
|
endif
|
|
|
|
# Path to tools.jar
|
|
HOST_JDK_TOOLS_JAR := $(ANDROID_JAVA8_HOME)/lib/tools.jar
|
|
|
|
# It's called md5 on Mac OS and md5sum on Linux
|
|
ifeq ($(HOST_OS),darwin)
|
|
MD5SUM:=md5 -q
|
|
else
|
|
MD5SUM:=md5sum
|
|
endif
|
|
|
|
APICHECK_COMMAND := $(JAVA) -Xmx4g -jar $(APICHECK) --no-banner --compatible-output=yes
|
|
|
|
# Boolean variable determining if the whitelist for compatible properties is enabled
|
|
PRODUCT_COMPATIBLE_PROPERTY := false
|
|
ifneq ($(PRODUCT_COMPATIBLE_PROPERTY_OVERRIDE),)
|
|
PRODUCT_COMPATIBLE_PROPERTY := $(PRODUCT_COMPATIBLE_PROPERTY_OVERRIDE)
|
|
else ifeq ($(PRODUCT_SHIPPING_API_LEVEL),)
|
|
#$(warning no product shipping level defined)
|
|
else ifneq ($(call math_lt,27,$(PRODUCT_SHIPPING_API_LEVEL)),)
|
|
PRODUCT_COMPATIBLE_PROPERTY := true
|
|
endif
|
|
|
|
.KATI_READONLY := \
|
|
PRODUCT_COMPATIBLE_PROPERTY
|
|
|
|
# Boolean variable determining if Treble is fully enabled
|
|
PRODUCT_FULL_TREBLE := false
|
|
ifneq ($(PRODUCT_FULL_TREBLE_OVERRIDE),)
|
|
PRODUCT_FULL_TREBLE := $(PRODUCT_FULL_TREBLE_OVERRIDE)
|
|
else ifeq ($(PRODUCT_SHIPPING_API_LEVEL),)
|
|
#$(warning no product shipping level defined)
|
|
else ifneq ($(call math_gt_or_eq,$(PRODUCT_SHIPPING_API_LEVEL),26),)
|
|
PRODUCT_FULL_TREBLE := true
|
|
endif
|
|
|
|
# TODO(b/69865032): Make PRODUCT_NOTICE_SPLIT the default behavior and remove
|
|
# references to it here and below.
|
|
ifdef PRODUCT_NOTICE_SPLIT_OVERRIDE
|
|
$(error PRODUCT_NOTICE_SPLIT_OVERRIDE cannot be set.)
|
|
endif
|
|
|
|
requirements := \
|
|
PRODUCT_TREBLE_LINKER_NAMESPACES \
|
|
PRODUCT_SEPOLICY_SPLIT \
|
|
PRODUCT_ENFORCE_VINTF_MANIFEST \
|
|
PRODUCT_NOTICE_SPLIT
|
|
|
|
# If it is overriden, then the requirement override is taken, otherwise it's
|
|
# PRODUCT_FULL_TREBLE
|
|
$(foreach req,$(requirements),$(eval \
|
|
$(req) := $(if $($(req)_OVERRIDE),$($(req)_OVERRIDE),$(PRODUCT_FULL_TREBLE))))
|
|
# If the requirement is false for any reason, then it's not PRODUCT_FULL_TREBLE
|
|
$(foreach req,$(requirements),$(eval \
|
|
PRODUCT_FULL_TREBLE := $(if $(filter false,$($(req))),false,$(PRODUCT_FULL_TREBLE))))
|
|
|
|
PRODUCT_FULL_TREBLE_OVERRIDE ?=
|
|
$(foreach req,$(requirements),$(eval $(req)_OVERRIDE ?=))
|
|
|
|
# TODO(b/114488870): disallow PRODUCT_FULL_TREBLE_OVERRIDE from being used.
|
|
.KATI_READONLY := \
|
|
PRODUCT_FULL_TREBLE_OVERRIDE \
|
|
$(foreach req,$(requirements),$(req)_OVERRIDE) \
|
|
$(requirements) \
|
|
PRODUCT_FULL_TREBLE \
|
|
|
|
$(KATI_obsolete_var $(foreach req,$(requirements),$(req)_OVERRIDE) \
|
|
,This should be referenced without the _OVERRIDE suffix.)
|
|
|
|
requirements :=
|
|
|
|
# BOARD_PROPERTY_OVERRIDES_SPLIT_ENABLED can be true only if early-mount of
|
|
# partitions is supported. But the early-mount must be supported for full
|
|
# treble products, and so BOARD_PROPERTY_OVERRIDES_SPLIT_ENABLED should be set
|
|
# by default for full treble products.
|
|
ifeq ($(PRODUCT_FULL_TREBLE),true)
|
|
BOARD_PROPERTY_OVERRIDES_SPLIT_ENABLED ?= true
|
|
endif
|
|
|
|
# If PRODUCT_USE_VNDK is true and BOARD_VNDK_VERSION is not defined yet,
|
|
# BOARD_VNDK_VERSION will be set to "current" as default.
|
|
# PRODUCT_USE_VNDK will be true in Android-P or later launching devices.
|
|
PRODUCT_USE_VNDK := false
|
|
ifneq ($(PRODUCT_USE_VNDK_OVERRIDE),)
|
|
PRODUCT_USE_VNDK := $(PRODUCT_USE_VNDK_OVERRIDE)
|
|
else ifeq ($(PRODUCT_SHIPPING_API_LEVEL),)
|
|
# No shipping level defined
|
|
else ifeq ($(call math_gt_or_eq,27,$(PRODUCT_SHIPPING_API_LEVEL)),)
|
|
PRODUCT_USE_VNDK := $(PRODUCT_FULL_TREBLE)
|
|
endif
|
|
|
|
ifeq ($(PRODUCT_USE_VNDK),true)
|
|
ifndef BOARD_VNDK_VERSION
|
|
BOARD_VNDK_VERSION := current
|
|
endif
|
|
endif
|
|
|
|
$(KATI_obsolete_var PRODUCT_USE_VNDK_OVERRIDE,Use PRODUCT_USE_VNDK instead)
|
|
.KATI_READONLY := \
|
|
PRODUCT_USE_VNDK
|
|
|
|
# Set BOARD_SYSTEMSDK_VERSIONS to the latest SystemSDK version starting from P-launching
|
|
# devices if unset.
|
|
ifndef BOARD_SYSTEMSDK_VERSIONS
|
|
ifdef PRODUCT_SHIPPING_API_LEVEL
|
|
ifneq ($(call math_gt_or_eq,$(PRODUCT_SHIPPING_API_LEVEL),28),)
|
|
ifeq (REL,$(PLATFORM_VERSION_CODENAME))
|
|
BOARD_SYSTEMSDK_VERSIONS := $(PLATFORM_SDK_VERSION)
|
|
else
|
|
BOARD_SYSTEMSDK_VERSIONS := $(PLATFORM_VERSION_CODENAME)
|
|
endif
|
|
endif
|
|
endif
|
|
endif
|
|
|
|
|
|
ifdef PRODUCT_SHIPPING_API_LEVEL
|
|
ifneq ($(call numbers_less_than,$(PRODUCT_SHIPPING_API_LEVEL),$(BOARD_SYSTEMSDK_VERSIONS)),)
|
|
$(error BOARD_SYSTEMSDK_VERSIONS ($(BOARD_SYSTEMSDK_VERSIONS)) must all be greater than or equal to PRODUCT_SHIPPING_API_LEVEL ($(PRODUCT_SHIPPING_API_LEVEL)))
|
|
endif
|
|
ifneq ($(call math_gt_or_eq,$(PRODUCT_SHIPPING_API_LEVEL),28),)
|
|
ifneq ($(TARGET_IS_64_BIT), true)
|
|
ifneq ($(TARGET_USES_64_BIT_BINDER), true)
|
|
$(error When PRODUCT_SHIPPING_API_LEVEL >= 28, TARGET_USES_64_BIT_BINDER must be true)
|
|
endif
|
|
endif
|
|
endif
|
|
ifneq ($(call math_gt_or_eq,$(PRODUCT_SHIPPING_API_LEVEL),29),)
|
|
ifneq ($(BOARD_OTA_FRAMEWORK_VBMETA_VERSION_OVERRIDE),)
|
|
$(error When PRODUCT_SHIPPING_API_LEVEL >= 29, BOARD_OTA_FRAMEWORK_VBMETA_VERSION_OVERRIDE cannot be set)
|
|
endif
|
|
endif
|
|
endif
|
|
|
|
# The default key if not set as LOCAL_CERTIFICATE
|
|
ifdef PRODUCT_DEFAULT_DEV_CERTIFICATE
|
|
DEFAULT_SYSTEM_DEV_CERTIFICATE := $(PRODUCT_DEFAULT_DEV_CERTIFICATE)
|
|
else
|
|
DEFAULT_SYSTEM_DEV_CERTIFICATE := build/make/target/product/security/testkey
|
|
endif
|
|
.KATI_READONLY := DEFAULT_SYSTEM_DEV_CERTIFICATE
|
|
|
|
BUILD_NUMBER_FROM_FILE := $$(cat $(OUT_DIR)/build_number.txt)
|
|
BUILD_DATETIME_FROM_FILE := $$(cat $(BUILD_DATETIME_FILE))
|
|
|
|
# SEPolicy versions
|
|
|
|
# PLATFORM_SEPOLICY_VERSION is a number of the form "NN.m" with "NN" mapping to
|
|
# PLATFORM_SDK_VERSION and "m" as a minor number which allows for SELinux
|
|
# changes independent of PLATFORM_SDK_VERSION. This value will be set to
|
|
# 10000.0 to represent tip-of-tree development that is inherently unstable and
|
|
# thus designed not to work with any shipping vendor policy. This is similar in
|
|
# spirit to how DEFAULT_APP_TARGET_SDK is set.
|
|
# The minor version ('m' component) must be updated every time a platform release
|
|
# is made which breaks compatibility with the previous platform sepolicy version,
|
|
# not just on every increase in PLATFORM_SDK_VERSION. The minor version should
|
|
# be reset to 0 on every bump of the PLATFORM_SDK_VERSION.
|
|
sepolicy_major_vers := 28
|
|
sepolicy_minor_vers := 0
|
|
|
|
ifneq ($(sepolicy_major_vers), $(PLATFORM_SDK_VERSION))
|
|
$(error sepolicy_major_version does not match PLATFORM_SDK_VERSION, please update.)
|
|
endif
|
|
|
|
TOT_SEPOLICY_VERSION := 10000.0
|
|
ifneq (REL,$(PLATFORM_VERSION_CODENAME))
|
|
PLATFORM_SEPOLICY_VERSION := $(TOT_SEPOLICY_VERSION)
|
|
else
|
|
PLATFORM_SEPOLICY_VERSION := $(join $(addsuffix .,$(sepolicy_major_vers)), $(sepolicy_minor_vers))
|
|
endif
|
|
sepolicy_major_vers :=
|
|
sepolicy_minor_vers :=
|
|
|
|
# A list of SEPolicy versions, besides PLATFORM_SEPOLICY_VERSION, that the framework supports.
|
|
PLATFORM_SEPOLICY_COMPAT_VERSIONS := \
|
|
26.0 \
|
|
27.0 \
|
|
28.0 \
|
|
|
|
.KATI_READONLY := \
|
|
PLATFORM_SEPOLICY_COMPAT_VERSIONS \
|
|
PLATFORM_SEPOLICY_VERSION \
|
|
TOT_SEPOLICY_VERSION \
|
|
|
|
ifeq ($(PRODUCT_OTA_ENFORCE_VINTF_KERNEL_REQUIREMENTS),)
|
|
ifdef PRODUCT_SHIPPING_API_LEVEL
|
|
ifeq (true,$(call math_gt_or_eq,$(PRODUCT_SHIPPING_API_LEVEL),29))
|
|
PRODUCT_OTA_ENFORCE_VINTF_KERNEL_REQUIREMENTS := true
|
|
endif
|
|
endif
|
|
endif
|
|
.KATI_READONLY := PRODUCT_OTA_ENFORCE_VINTF_KERNEL_REQUIREMENTS
|
|
|
|
ifeq ($(PRODUCT_RETROFIT_DYNAMIC_PARTITIONS),true)
|
|
ifneq ($(PRODUCT_USE_DYNAMIC_PARTITIONS),true)
|
|
$(error PRODUCT_USE_DYNAMIC_PARTITIONS must be true when PRODUCT_RETROFIT_DYNAMIC_PARTITIONS \
|
|
is set)
|
|
endif
|
|
ifdef PRODUCT_SHIPPING_API_LEVEL
|
|
ifeq (true,$(call math_gt_or_eq,$(PRODUCT_SHIPPING_API_LEVEL),29))
|
|
$(error Devices with shipping API level $(PRODUCT_SHIPPING_API_LEVEL) must not set \
|
|
PRODUCT_RETROFIT_DYNAMIC_PARTITIONS)
|
|
endif
|
|
endif
|
|
endif
|
|
|
|
ifeq ($(PRODUCT_USE_DYNAMIC_PARTITIONS),true)
|
|
ifeq ($(BOARD_BUILD_SYSTEM_ROOT_IMAGE),true)
|
|
$(error BOARD_BUILD_SYSTEM_ROOT_IMAGE cannot be true for devices with dynamic partitions)
|
|
endif
|
|
ifneq ($(PRODUCT_USE_DYNAMIC_PARTITION_SIZE),true)
|
|
$(error PRODUCT_USE_DYNAMIC_PARTITION_SIZE must be true for devices with dynamic partitions)
|
|
endif
|
|
endif
|
|
|
|
ifeq ($(PRODUCT_BUILD_SUPER_PARTITION),true)
|
|
ifneq ($(PRODUCT_USE_DYNAMIC_PARTITIONS),true)
|
|
$(error Can only build super partition for devices with dynamic partitions)
|
|
endif
|
|
endif
|
|
|
|
|
|
ifeq ($(PRODUCT_USE_DYNAMIC_PARTITION_SIZE),true)
|
|
|
|
ifneq ($(BOARD_SYSTEMIMAGE_PARTITION_SIZE),)
|
|
ifneq ($(BOARD_SYSTEMIMAGE_PARTITION_RESERVED_SIZE),)
|
|
$(error Should not define BOARD_SYSTEMIMAGE_PARTITION_SIZE and \
|
|
BOARD_SYSTEMIMAGE_PARTITION_RESERVED_SIZE together)
|
|
endif
|
|
endif
|
|
|
|
ifneq ($(BOARD_VENDORIMAGE_PARTITION_SIZE),)
|
|
ifneq ($(BOARD_VENDORIMAGE_PARTITION_RESERVED_SIZE),)
|
|
$(error Should not define BOARD_VENDORIMAGE_PARTITION_SIZE and \
|
|
BOARD_VENDORIMAGE_PARTITION_RESERVED_SIZE together)
|
|
endif
|
|
endif
|
|
|
|
ifneq ($(BOARD_ODMIMAGE_PARTITION_SIZE),)
|
|
ifneq ($(BOARD_ODMIMAGE_PARTITION_RESERVED_SIZE),)
|
|
$(error Should not define BOARD_ODMIMAGE_PARTITION_SIZE and \
|
|
BOARD_ODMIMAGE_PARTITION_RESERVED_SIZE together)
|
|
endif
|
|
endif
|
|
|
|
ifneq ($(BOARD_PRODUCTIMAGE_PARTITION_SIZE),)
|
|
ifneq ($(BOARD_PRODUCTIMAGE_PARTITION_RESERVED_SIZE),)
|
|
$(error Should not define BOARD_PRODUCTIMAGE_PARTITION_SIZE and \
|
|
BOARD_PRODUCTIMAGE_PARTITION_RESERVED_SIZE together)
|
|
endif
|
|
endif
|
|
|
|
ifneq ($(BOARD_PRODUCT_SERVICESIMAGE_PARTITION_SIZE),)
|
|
ifneq ($(BOARD_PRODUCT_SERVICESIMAGE_PARTITION_RESERVED_SIZE),)
|
|
$(error Should not define BOARD_PRODUCT_SERVICESIMAGE_PARTITION_SIZE and \
|
|
BOARD_PRODUCT_SERVICESIMAGE_PARTITION_RESERVED_SIZE together)
|
|
endif
|
|
endif
|
|
|
|
endif # PRODUCT_USE_DYNAMIC_PARTITION_SIZE
|
|
|
|
ifeq ($(PRODUCT_USE_DYNAMIC_PARTITIONS),true)
|
|
|
|
# BOARD_SUPER_PARTITION_GROUPS defines a list of "updatable groups". Each updatable group is a
|
|
# group of partitions that share the same pool of free spaces.
|
|
# For each group in BOARD_SUPER_PARTITION_GROUPS, a BOARD_{GROUP}_SIZE and
|
|
# BOARD_{GROUP}_PARTITION_PARTITION_LIST may be defined.
|
|
# - BOARD_{GROUP}_SIZE: The maximum sum of sizes of all partitions in the group.
|
|
# Must not be empty.
|
|
# - BOARD_{GROUP}_PARTITION_PARTITION_LIST: the list of partitions that belongs to this group.
|
|
# If empty, no partitions belong to this group, and the sum of sizes is effectively 0.
|
|
$(foreach group,$(call to-upper,$(BOARD_SUPER_PARTITION_GROUPS)), \
|
|
$(eval BOARD_$(group)_PARTITION_LIST ?=) \
|
|
$(eval .KATI_READONLY := BOARD_$(group)_PARTITION_LIST) \
|
|
)
|
|
ifeq ($(PRODUCT_BUILD_SUPER_PARTITION),true)
|
|
$(foreach group,$(call to-upper,$(BOARD_SUPER_PARTITION_GROUPS)), \
|
|
$(eval BOARD_$(group)_SIZE := $(strip $(BOARD_$(group)_SIZE))) \
|
|
$(if $(BOARD_$(group)_SIZE),,$(error BOARD_$(group)_SIZE must not be empty)) \
|
|
$(eval .KATI_READONLY := BOARD_$(group)_SIZE) \
|
|
)
|
|
endif # PRODUCT_BUILD_SUPER_PARTITION
|
|
|
|
# BOARD_*_PARTITION_LIST: a list of the following tokens
|
|
valid_super_partition_list := system vendor product product_services odm
|
|
$(foreach group,$(call to-upper,$(BOARD_SUPER_PARTITION_GROUPS)), \
|
|
$(if $(filter-out $(valid_super_partition_list),$(BOARD_$(group)_PARTITION_LIST)), \
|
|
$(error BOARD_$(group)_PARTITION_LIST contains invalid partition name \
|
|
$(filter-out $(valid_super_partition_list),$(BOARD_$(group)_PARTITION_LIST)). \
|
|
Valid names are $(valid_super_partition_list))))
|
|
valid_super_partition_list :=
|
|
|
|
|
|
# Define BOARD_SUPER_PARTITION_PARTITION_LIST, the sum of all BOARD_*_PARTITION_LIST
|
|
ifdef BOARD_SUPER_PARTITION_PARTITION_LIST
|
|
$(error BOARD_SUPER_PARTITION_PARTITION_LIST should not be defined, but computed from \
|
|
BOARD_SUPER_PARTITION_GROUPS and BOARD_*_PARTITION_LIST)
|
|
endif
|
|
BOARD_SUPER_PARTITION_PARTITION_LIST := \
|
|
$(foreach group,$(call to-upper,$(BOARD_SUPER_PARTITION_GROUPS)), \
|
|
$(BOARD_$(group)_PARTITION_LIST))
|
|
.KATI_READONLY := BOARD_SUPER_PARTITION_PARTITION_LIST
|
|
|
|
endif # PRODUCT_USE_DYNAMIC_PARTITIONS
|
|
|
|
ifeq ($(PRODUCT_BUILD_SUPER_PARTITION),true)
|
|
|
|
ifneq ($(BOARD_SUPER_PARTITION_SIZE),)
|
|
ifeq ($(PRODUCT_RETROFIT_DYNAMIC_PARTITIONS),true)
|
|
|
|
# The metadata device must be specified manually for retrofitting.
|
|
ifeq ($(BOARD_SUPER_PARTITION_METADATA_DEVICE),)
|
|
$(error Must specify BOARD_SUPER_PARTITION_METADATA_DEVICE if PRODUCT_RETROFIT_DYNAMIC_PARTITIONS=true.)
|
|
endif
|
|
|
|
# The super partition block device list must be specified manually for retrofitting.
|
|
ifeq ($(BOARD_SUPER_PARTITION_BLOCK_DEVICES),)
|
|
$(error Must specify BOARD_SUPER_PARTITION_BLOCK_DEVICES if PRODUCT_RETROFIT_DYNAMIC_PARTITIONS=true.)
|
|
endif
|
|
|
|
# The metadata device must be included in the super partition block device list.
|
|
ifeq (,$(filter $(BOARD_SUPER_PARTITION_METADATA_DEVICE),$(BOARD_SUPER_PARTITION_BLOCK_DEVICES)))
|
|
$(error BOARD_SUPER_PARTITION_METADATA_DEVICE is not listed in BOARD_SUPER_PARTITION_BLOCK_DEVICES.)
|
|
endif
|
|
|
|
# The metadata device must be supplied to init via the kernel command-line.
|
|
INTERNAL_KERNEL_CMDLINE += androidboot.super_partition=$(BOARD_SUPER_PARTITION_METADATA_DEVICE)
|
|
|
|
BOARD_BUILD_RETROFIT_DYNAMIC_PARTITIONS_OTA_PACKAGE := true
|
|
|
|
# If "vendor" is listed as one of the dynamic partitions but without its image available (e.g. an
|
|
# AOSP target built without vendor image), don't build the retrofit full OTA package. Because we
|
|
# won't be able to build meaningful super_* images for retrofitting purpose.
|
|
ifneq (,$(filter vendor,$(BOARD_SUPER_PARTITION_PARTITION_LIST)))
|
|
ifndef BUILDING_VENDOR_IMAGE
|
|
ifndef BOARD_PREBUILT_VENDORIMAGE
|
|
BOARD_BUILD_RETROFIT_DYNAMIC_PARTITIONS_OTA_PACKAGE :=
|
|
endif # BOARD_PREBUILT_VENDORIMAGE
|
|
endif # BUILDING_VENDOR_IMAGE
|
|
endif # BOARD_SUPER_PARTITION_PARTITION_LIST
|
|
|
|
else # PRODUCT_RETROFIT_DYNAMIC_PARTITIONS
|
|
|
|
# For normal devices, we populate BOARD_SUPER_PARTITION_BLOCK_DEVICES so the
|
|
# build can handle both cases consistently.
|
|
ifeq ($(BOARD_SUPER_PARTITION_METADATA_DEVICE),)
|
|
BOARD_SUPER_PARTITION_METADATA_DEVICE := super
|
|
endif
|
|
|
|
ifeq ($(BOARD_SUPER_PARTITION_BLOCK_DEVICES),)
|
|
BOARD_SUPER_PARTITION_BLOCK_DEVICES := $(BOARD_SUPER_PARTITION_METADATA_DEVICE)
|
|
endif
|
|
|
|
# If only one super block device, default to super partition size.
|
|
ifeq ($(word 2,$(BOARD_SUPER_PARTITION_BLOCK_DEVICES)),)
|
|
BOARD_SUPER_PARTITION_$(call to-upper,$(strip $(BOARD_SUPER_PARTITION_BLOCK_DEVICES)))_DEVICE_SIZE ?= \
|
|
$(BOARD_SUPER_PARTITION_SIZE)
|
|
endif
|
|
|
|
ifneq ($(BOARD_SUPER_PARTITION_METADATA_DEVICE),super)
|
|
INTERNAL_KERNEL_CMDLINE += androidboot.super_partition=$(BOARD_SUPER_PARTITION_METADATA_DEVICE)
|
|
endif
|
|
BOARD_BUILD_RETROFIT_DYNAMIC_PARTITIONS_OTA_PACKAGE :=
|
|
|
|
endif # PRODUCT_RETROFIT_DYNAMIC_PARTITIONS
|
|
endif # BOARD_SUPER_PARTITION_SIZE
|
|
.KATI_READONLY := BOARD_SUPER_PARTITION_BLOCK_DEVICES
|
|
.KATI_READONLY := BOARD_SUPER_PARTITION_METADATA_DEVICE
|
|
.KATI_READONLY := BOARD_BUILD_RETROFIT_DYNAMIC_PARTITIONS_OTA_PACKAGE
|
|
|
|
$(foreach device,$(call to-upper,$(BOARD_SUPER_PARTITION_BLOCK_DEVICES)), \
|
|
$(eval BOARD_SUPER_PARTITION_$(device)_DEVICE_SIZE := $(strip $(BOARD_SUPER_PARTITION_$(device)_DEVICE_SIZE))) \
|
|
$(if $(BOARD_SUPER_PARTITION_$(device)_DEVICE_SIZE),, \
|
|
$(error BOARD_SUPER_PARTITION_$(device)_DEVICE_SIZE must not be empty)) \
|
|
$(eval .KATI_READONLY := BOARD_SUPER_PARTITION_$(device)_DEVICE_SIZE))
|
|
|
|
endif # PRODUCT_BUILD_SUPER_PARTITION
|
|
|
|
# ###############################################################
|
|
# Set up final options.
|
|
# ###############################################################
|
|
|
|
# We run gcc/clang with PWD=/proc/self/cwd to remove the $TOP
|
|
# from the debug output. That way two builds in two different
|
|
# directories will create the same output.
|
|
# /proc doesn't exist on Darwin.
|
|
ifeq ($(HOST_OS),linux)
|
|
RELATIVE_PWD := PWD=/proc/self/cwd
|
|
else
|
|
RELATIVE_PWD :=
|
|
endif
|
|
|
|
TARGET_PROJECT_INCLUDES :=
|
|
TARGET_PROJECT_SYSTEM_INCLUDES := \
|
|
$(TARGET_DEVICE_KERNEL_HEADERS) $(TARGET_BOARD_KERNEL_HEADERS) \
|
|
$(TARGET_PRODUCT_KERNEL_HEADERS)
|
|
|
|
ifdef TARGET_2ND_ARCH
|
|
$(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_PROJECT_INCLUDES := $(TARGET_PROJECT_INCLUDES)
|
|
$(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_PROJECT_SYSTEM_INCLUDES := $(TARGET_PROJECT_SYSTEM_INCLUDES)
|
|
endif
|
|
|
|
# Flags for DEX2OAT
|
|
first_non_empty_of_three = $(if $(1),$(1),$(if $(2),$(2),$(3)))
|
|
DEX2OAT_TARGET_ARCH := $(TARGET_ARCH)
|
|
DEX2OAT_TARGET_CPU_VARIANT := $(call first_non_empty_of_three,$(TARGET_CPU_VARIANT),$(TARGET_ARCH_VARIANT),default)
|
|
DEX2OAT_TARGET_CPU_VARIANT_RUNTIME := $(call first_non_empty_of_three,$(TARGET_CPU_VARIANT_RUNTIME),$(TARGET_ARCH_VARIANT),default)
|
|
DEX2OAT_TARGET_INSTRUCTION_SET_FEATURES := default
|
|
|
|
ifdef TARGET_2ND_ARCH
|
|
$(TARGET_2ND_ARCH_VAR_PREFIX)DEX2OAT_TARGET_ARCH := $(TARGET_2ND_ARCH)
|
|
$(TARGET_2ND_ARCH_VAR_PREFIX)DEX2OAT_TARGET_CPU_VARIANT := $(call first_non_empty_of_three,$(TARGET_2ND_CPU_VARIANT),$(TARGET_2ND_ARCH_VARIANT),default)
|
|
$(TARGET_2ND_ARCH_VAR_PREFIX)DEX2OAT_TARGET_CPU_VARIANT_RUNTIME := $(call first_non_empty_of_three,$(TARGET_2ND_CPU_VARIANT_RUNTIME),$(TARGET_2ND_ARCH_VARIANT),default)
|
|
$(TARGET_2ND_ARCH_VAR_PREFIX)DEX2OAT_TARGET_INSTRUCTION_SET_FEATURES := default
|
|
endif
|
|
|
|
# ###############################################################
|
|
# Collect a list of the SDK versions that we could compile against
|
|
# For use with the LOCAL_SDK_VERSION variable for include $(BUILD_PACKAGE)
|
|
# ###############################################################
|
|
|
|
HISTORICAL_SDK_VERSIONS_ROOT := $(TOPDIR)prebuilts/sdk
|
|
HISTORICAL_NDK_VERSIONS_ROOT := $(TOPDIR)prebuilts/ndk
|
|
|
|
# The path where app can reference the support library resources.
|
|
ifdef TARGET_BUILD_APPS
|
|
SUPPORT_LIBRARY_ROOT := $(HISTORICAL_SDK_VERSIONS_ROOT)/current/support
|
|
else
|
|
SUPPORT_LIBRARY_ROOT := frameworks/support
|
|
endif
|
|
|
|
get-sdk-version = $(if $(findstring _,$(1)),$(subst core_,,$(subst system_,,$(subst test_,,$(1)))),$(1))
|
|
get-sdk-api = $(if $(findstring _,$(1)),$(patsubst %_$(call get-sdk-version,$(1)),%,$(1)),public)
|
|
get-prebuilt-sdk-dir = $(HISTORICAL_SDK_VERSIONS_ROOT)/$(call get-sdk-version,$(1))/$(call get-sdk-api,$(1))
|
|
|
|
# Resolve LOCAL_SDK_VERSION to prebuilt module name, e.g.:
|
|
# 23 -> sdk_public_23_android
|
|
# system_current -> sdk_system_current_android
|
|
# $(1): An sdk version (LOCAL_SDK_VERSION)
|
|
# $(2): optional library name (default: android)
|
|
define resolve-prebuilt-sdk-module
|
|
$(if $(findstring _,$(1)),\
|
|
sdk_$(1)_$(or $(2),android),\
|
|
sdk_public_$(1)_$(or $(2),android))
|
|
endef
|
|
|
|
# Resolve LOCAL_SDK_VERSION to prebuilt android.jar
|
|
# $(1): LOCAL_SDK_VERSION
|
|
resolve-prebuilt-sdk-jar-path = $(call get-prebuilt-sdk-dir,$(1))/android.jar
|
|
|
|
# Resolve LOCAL_SDK_VERSION to prebuilt framework.aidl
|
|
# $(1): An sdk version (LOCAL_SDK_VERSION)
|
|
resolve-prebuilt-sdk-aidl-path = $(call get-prebuilt-sdk-dir,$(call get-sdk-version,$(1)))/framework.aidl
|
|
|
|
# Historical SDK version N is stored in $(HISTORICAL_SDK_VERSIONS_ROOT)/N.
|
|
# The 'current' version is whatever this source tree is.
|
|
#
|
|
# sgrax is the opposite of xargs. It takes the list of args and puts them
|
|
# on each line for sort to process.
|
|
# sort -g is a numeric sort, so 1 2 3 10 instead of 1 10 2 3.
|
|
|
|
# Numerically sort a list of numbers
|
|
# $(1): the list of numbers to be sorted
|
|
define numerically_sort
|
|
$(shell function sgrax() { \
|
|
while [ -n "$$1" ] ; do echo $$1 ; shift ; done \
|
|
} ; \
|
|
( sgrax $(1) | sort -g ) )
|
|
endef
|
|
|
|
# This produces a list like "current/core current/public current/system 4/public"
|
|
TARGET_AVAILABLE_SDK_VERSIONS := $(wildcard $(HISTORICAL_SDK_VERSIONS_ROOT)/*/*/android.jar)
|
|
TARGET_AVAILABLE_SDK_VERSIONS := $(patsubst $(HISTORICAL_SDK_VERSIONS_ROOT)/%/android.jar,%,$(TARGET_AVAILABLE_SDK_VERSIONS))
|
|
# Strips and reorganizes the "public", "core" and "system" subdirs.
|
|
TARGET_AVAILABLE_SDK_VERSIONS := $(subst /public,,$(TARGET_AVAILABLE_SDK_VERSIONS))
|
|
TARGET_AVAILABLE_SDK_VERSIONS := $(patsubst %/core,core_%,$(TARGET_AVAILABLE_SDK_VERSIONS))
|
|
TARGET_AVAILABLE_SDK_VERSIONS := $(patsubst %/system,system_%,$(TARGET_AVAILABLE_SDK_VERSIONS))
|
|
# No prebuilt for test_current.
|
|
TARGET_AVAILABLE_SDK_VERSIONS += test_current
|
|
TARGET_AVAIALBLE_SDK_VERSIONS := $(call numerically_sort,$(TARGET_AVAILABLE_SDK_VERSIONS))
|
|
|
|
TARGET_SDK_VERSIONS_WITHOUT_JAVA_18_SUPPORT := $(call numbers_less_than,24,$(TARGET_AVAILABLE_SDK_VERSIONS))
|
|
TARGET_SDK_VERSIONS_WITHOUT_JAVA_19_SUPPORT := $(call numbers_less_than,27,$(TARGET_AVAILABLE_SDK_VERSIONS))
|
|
|
|
ifndef INTERNAL_PLATFORM_PRIVATE_API_FILE
|
|
INTERNAL_PLATFORM_PRIVATE_API_FILE := $(TARGET_OUT_COMMON_INTERMEDIATES)/PACKAGING/private.txt
|
|
endif
|
|
ifndef INTERNAL_PLATFORM_PRIVATE_DEX_API_FILE
|
|
INTERNAL_PLATFORM_PRIVATE_DEX_API_FILE := $(TARGET_OUT_COMMON_INTERMEDIATES)/PACKAGING/private-dex.txt
|
|
endif
|
|
ifndef INTERNAL_PLATFORM_SYSTEM_PRIVATE_API_FILE
|
|
INTERNAL_PLATFORM_SYSTEM_PRIVATE_API_FILE := $(TARGET_OUT_COMMON_INTERMEDIATES)/PACKAGING/system-private.txt
|
|
endif
|
|
ifndef INTERNAL_PLATFORM_SYSTEM_PRIVATE_DEX_API_FILE
|
|
INTERNAL_PLATFORM_SYSTEM_PRIVATE_DEX_API_FILE := $(TARGET_OUT_COMMON_INTERMEDIATES)/PACKAGING/system-private-dex.txt
|
|
endif
|
|
|
|
# Missing optional uses-libraries so that the platform doesn't create build rules that depend on
|
|
# them. See setup_one_odex.mk.
|
|
INTERNAL_PLATFORM_MISSING_USES_LIBRARIES := com.google.android.ble com.google.android.wearable
|
|
|
|
# This is the standard way to name a directory containing prebuilt target
|
|
# objects. E.g., prebuilt/$(TARGET_PREBUILT_TAG)/libc.so
|
|
TARGET_PREBUILT_TAG := android-$(TARGET_ARCH)
|
|
ifdef TARGET_2ND_ARCH
|
|
TARGET_2ND_PREBUILT_TAG := android-$(TARGET_2ND_ARCH)
|
|
endif
|
|
|
|
# Set up RS prebuilt variables for compatibility library
|
|
|
|
RS_PREBUILT_CLCORE := prebuilts/sdk/renderscript/lib/$(TARGET_ARCH)/librsrt_$(TARGET_ARCH).bc
|
|
RS_PREBUILT_COMPILER_RT := prebuilts/sdk/renderscript/lib/$(TARGET_ARCH)/libcompiler_rt.a
|
|
|
|
# API Level lists for Renderscript Compat lib.
|
|
RSCOMPAT_32BIT_ONLY_API_LEVELS := 8 9 10 11 12 13 14 15 16 17 18 19 20
|
|
RSCOMPAT_NO_USAGEIO_API_LEVELS := 8 9 10 11 12 13
|
|
|
|
# Add BUILD_NUMBER to apps default version name if it's unbundled build.
|
|
ifdef TARGET_BUILD_APPS
|
|
TARGET_BUILD_WITH_APPS_VERSION_NAME := true
|
|
endif
|
|
|
|
ifdef TARGET_BUILD_WITH_APPS_VERSION_NAME
|
|
APPS_DEFAULT_VERSION_NAME := $(PLATFORM_VERSION)-$(BUILD_NUMBER_FROM_FILE)
|
|
else
|
|
APPS_DEFAULT_VERSION_NAME := $(PLATFORM_VERSION)
|
|
endif
|
|
|
|
# ANDROID_WARNING_ALLOWED_PROJECTS is generated by build/soong.
|
|
define find_warning_allowed_projects
|
|
$(filter $(ANDROID_WARNING_ALLOWED_PROJECTS),$(1)/)
|
|
endef
|
|
|
|
# These goals don't need to collect and include Android.mks/CleanSpec.mks
|
|
# in the source tree.
|
|
dont_bother_goals := out \
|
|
snod systemimage-nodeps \
|
|
stnod systemtarball-nodeps \
|
|
userdataimage-nodeps userdatatarball-nodeps \
|
|
cacheimage-nodeps \
|
|
bptimage-nodeps \
|
|
vnod vendorimage-nodeps \
|
|
pnod productimage-nodeps \
|
|
psnod productservicesimage-nodeps \
|
|
onod odmimage-nodeps \
|
|
systemotherimage-nodeps \
|
|
ramdisk-nodeps \
|
|
ramdisk_debug-nodeps \
|
|
bootimage-nodeps \
|
|
bootimage_debug-nodeps \
|
|
recoveryimage-nodeps \
|
|
vbmetaimage-nodeps \
|
|
product-graph dump-products
|
|
|
|
ifeq ($(CALLED_FROM_SETUP),true)
|
|
include $(BUILD_SYSTEM)/ninja_config.mk
|
|
include $(BUILD_SYSTEM)/soong_config.mk
|
|
endif
|
|
|
|
-include external/linux-kselftest/android/kselftest_test_list.mk
|
|
-include external/ltp/android/ltp_package_list.mk
|
|
DEFAULT_DATA_OUT_MODULES := ltp $(ltp_packages) $(kselftest_modules)
|
|
.KATI_READONLY := DEFAULT_DATA_OUT_MODULES
|
|
|
|
include $(BUILD_SYSTEM)/dumpvar.mk
|