platform_build/core/combo/TARGET_linux-arm.mk
Dan Willemsen db14f793bc Remove arm-specific -Wno-psabi
This flag was added to stop a GCC 4.4 specific warning. Since we've
upgraded, this flag is no longer necessary. It's already stripped for
clang builds, and I found no instances in the logs after removing it.

Change-Id: If5316d2eb8066dc43d7af7aebc7e4920b4ada192
2016-05-06 17:08:24 -07:00

182 lines
7.7 KiB
Makefile

#
# Copyright (C) 2006 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
# Configuration for Linux on ARM.
# Included by combo/select.mk
# You can set TARGET_ARCH_VARIANT to use an arch version other
# than ARMv5TE. Each value should correspond to a file named
# $(BUILD_COMBOS)/arch/<name>.mk which must contain
# makefile variable definitions. Their
# purpose is to allow module Android.mk files to selectively compile
# different versions of code based upon the funtionality and
# instructions available in a given architecture version.
#
# The blocks also define specific arch_variant_cflags, which
# include defines, and compiler settings for the given architecture
# version.
#
ifeq ($(strip $(TARGET_$(combo_2nd_arch_prefix)ARCH_VARIANT)),)
TARGET_$(combo_2nd_arch_prefix)ARCH_VARIANT := armv5te
endif
# Decouple NDK library selection with platform compiler version
$(combo_2nd_arch_prefix)TARGET_NDK_GCC_VERSION := 4.9
ifeq ($(strip $(TARGET_GCC_VERSION_EXP)),)
$(combo_2nd_arch_prefix)TARGET_GCC_VERSION := 4.9
else
$(combo_2nd_arch_prefix)TARGET_GCC_VERSION := $(TARGET_GCC_VERSION_EXP)
endif
TARGET_ARCH_SPECIFIC_MAKEFILE := $(BUILD_COMBOS)/arch/$(TARGET_$(combo_2nd_arch_prefix)ARCH)/$(TARGET_$(combo_2nd_arch_prefix)ARCH_VARIANT).mk
ifeq ($(strip $(wildcard $(TARGET_ARCH_SPECIFIC_MAKEFILE))),)
$(error Unknown ARM architecture version: $(TARGET_$(combo_2nd_arch_prefix)ARCH_VARIANT))
endif
include $(TARGET_ARCH_SPECIFIC_MAKEFILE)
include $(BUILD_SYSTEM)/combo/fdo.mk
# You can set TARGET_TOOLS_PREFIX to get gcc from somewhere else
ifeq ($(strip $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)),)
$(combo_2nd_arch_prefix)TARGET_TOOLCHAIN_ROOT := prebuilts/gcc/$(HOST_PREBUILT_TAG)/arm/arm-linux-androideabi-$($(combo_2nd_arch_prefix)TARGET_GCC_VERSION)
$(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX := $($(combo_2nd_arch_prefix)TARGET_TOOLCHAIN_ROOT)/bin/arm-linux-androideabi-
endif
$(combo_2nd_arch_prefix)TARGET_CC := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)gcc
$(combo_2nd_arch_prefix)TARGET_CXX := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)g++
$(combo_2nd_arch_prefix)TARGET_AR := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)ar
$(combo_2nd_arch_prefix)TARGET_OBJCOPY := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)objcopy
$(combo_2nd_arch_prefix)TARGET_LD := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)ld
$(combo_2nd_arch_prefix)TARGET_READELF := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)readelf
$(combo_2nd_arch_prefix)TARGET_STRIP := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)strip
$(combo_2nd_arch_prefix)TARGET_NM := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)nm
define $(combo_var_prefix)transform-shared-lib-to-toc
$(call _gen_toc_command_for_elf,$(1),$(2))
endef
$(combo_2nd_arch_prefix)TARGET_NO_UNDEFINED_LDFLAGS := -Wl,--no-undefined
$(combo_2nd_arch_prefix)TARGET_arm_CFLAGS := -O2 \
-fomit-frame-pointer \
-fstrict-aliasing \
-funswitch-loops
# Modules can choose to compile some source as thumb.
$(combo_2nd_arch_prefix)TARGET_thumb_CFLAGS := -mthumb \
-Os \
-fomit-frame-pointer \
-fno-strict-aliasing
# Set FORCE_ARM_DEBUGGING to "true" in your buildspec.mk
# or in your environment to force a full arm build, even for
# files that are normally built as thumb; this can make
# gdb debugging easier. Don't forget to do a clean build.
#
# NOTE: if you try to build a -O0 build with thumb, several
# of the libraries (libpv, libwebcore, libkjs) need to be built
# with -mlong-calls. When built at -O0, those libraries are
# too big for a thumb "BL <label>" to go from one end to the other.
ifeq ($(FORCE_ARM_DEBUGGING),true)
$(combo_2nd_arch_prefix)TARGET_arm_CFLAGS += -fno-omit-frame-pointer -fno-strict-aliasing
$(combo_2nd_arch_prefix)TARGET_thumb_CFLAGS += -marm -fno-omit-frame-pointer
endif
$(combo_2nd_arch_prefix)TARGET_GLOBAL_CFLAGS += \
-msoft-float \
-ffunction-sections \
-fdata-sections \
-funwind-tables \
-fstack-protector-strong \
-Wa,--noexecstack \
-Werror=format-security \
-D_FORTIFY_SOURCE=2 \
-fno-short-enums \
-no-canonical-prefixes \
-fno-canonical-system-headers \
$(arch_variant_cflags) \
# The "-Wunused-but-set-variable" option often breaks projects that enable
# "-Wall -Werror" due to a commom idiom "ALOGV(mesg)" where ALOGV is turned
# into no-op in some builds while mesg is defined earlier. So we explicitly
# disable "-Wunused-but-set-variable" here.
ifneq ($(filter 4.6 4.6.% 4.7 4.7.% 4.8 4.9, $($(combo_2nd_arch_prefix)TARGET_GCC_VERSION)),)
$(combo_2nd_arch_prefix)TARGET_GLOBAL_CFLAGS += -fno-builtin-sin \
-fno-strict-volatile-bitfields
endif
$(combo_2nd_arch_prefix)TARGET_GLOBAL_LDFLAGS += \
-Wl,-z,noexecstack \
-Wl,-z,relro \
-Wl,-z,now \
-Wl,--build-id=md5 \
-Wl,--warn-shared-textrel \
-Wl,--fatal-warnings \
-Wl,--icf=safe \
-Wl,--hash-style=gnu \
-Wl,--no-undefined-version \
$(arch_variant_ldflags)
$(combo_2nd_arch_prefix)TARGET_GLOBAL_CFLAGS += -mthumb-interwork
$(combo_2nd_arch_prefix)TARGET_GLOBAL_CPPFLAGS += -fvisibility-inlines-hidden
# More flags/options can be added here
$(combo_2nd_arch_prefix)TARGET_RELEASE_CFLAGS := \
-DNDEBUG \
-g \
-Wstrict-aliasing=2 \
-fgcse-after-reload \
-frerun-cse-after-loop \
-frename-registers
libc_root := bionic/libc
## on some hosts, the target cross-compiler is not available so do not run this command
ifneq ($(wildcard $($(combo_2nd_arch_prefix)TARGET_CC)),)
# We compile with the global cflags to ensure that
# any flags which affect libgcc are correctly taken
# into account.
$(combo_2nd_arch_prefix)TARGET_LIBGCC := $(shell $($(combo_2nd_arch_prefix)TARGET_CC) \
$($(combo_2nd_arch_prefix)TARGET_GLOBAL_CFLAGS) -print-libgcc-file-name)
$(combo_2nd_arch_prefix)TARGET_LIBATOMIC := $(shell $($(combo_2nd_arch_prefix)TARGET_CC) \
$($(combo_2nd_arch_prefix)TARGET_GLOBAL_CFLAGS) -print-file-name=libatomic.a)
$(combo_2nd_arch_prefix)TARGET_LIBGCOV := $(shell $($(combo_2nd_arch_prefix)TARGET_CC) \
$($(combo_2nd_arch_prefix)TARGET_GLOBAL_CFLAGS) -print-file-name=libgcov.a)
endif
KERNEL_HEADERS_COMMON := $(libc_root)/kernel/uapi
KERNEL_HEADERS_COMMON += $(libc_root)/kernel/common
KERNEL_HEADERS_ARCH := $(libc_root)/kernel/uapi/asm-$(TARGET_$(combo_2nd_arch_prefix)ARCH)
KERNEL_HEADERS := $(KERNEL_HEADERS_COMMON) $(KERNEL_HEADERS_ARCH)
$(combo_2nd_arch_prefix)TARGET_C_INCLUDES := \
$(libc_root)/arch-arm/include \
$(libc_root)/include \
$(KERNEL_HEADERS) \
$(combo_2nd_arch_prefix)TARGET_CRTBEGIN_STATIC_O := $($(combo_2nd_arch_prefix)TARGET_OUT_INTERMEDIATE_LIBRARIES)/crtbegin_static.o
$(combo_2nd_arch_prefix)TARGET_CRTBEGIN_DYNAMIC_O := $($(combo_2nd_arch_prefix)TARGET_OUT_INTERMEDIATE_LIBRARIES)/crtbegin_dynamic.o
$(combo_2nd_arch_prefix)TARGET_CRTEND_O := $($(combo_2nd_arch_prefix)TARGET_OUT_INTERMEDIATE_LIBRARIES)/crtend_android.o
$(combo_2nd_arch_prefix)TARGET_CRTBEGIN_SO_O := $($(combo_2nd_arch_prefix)TARGET_OUT_INTERMEDIATE_LIBRARIES)/crtbegin_so.o
$(combo_2nd_arch_prefix)TARGET_CRTEND_SO_O := $($(combo_2nd_arch_prefix)TARGET_OUT_INTERMEDIATE_LIBRARIES)/crtend_so.o
$(combo_2nd_arch_prefix)TARGET_PACK_MODULE_RELOCATIONS := true
$(combo_2nd_arch_prefix)TARGET_LINKER := /system/bin/linker