tequilaOS/platform_build
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
platform_build/tools/applypatch/applypatch.sh
Doug Zongker ef85ea6086 allow separate source and target files for applypatch 
Allow applypatch to use different filenames for the source and target.
(Using the same filename is still fine; in fact the target filename
can be specified as "-" to mean "same as the source file.)  This will
allow us to still use diffs in the case of files being renamed, and
will allow us to use diffs for the boot and recovery images.
2009-05-08 15:43:26 -07:00

345 lines
13 KiB
Bash
Executable file
Raw Blame History

#!/bin/bash
#
# A test suite for applypatch. Run in a client where you have done
# envsetup, choosecombo, etc.
#
# DO NOT RUN THIS ON A DEVICE YOU CARE ABOUT. It will mess up your
# system partition.
#
#
# TODO: find some way to get this run regularly along with the rest of
# the tests.
EMULATOR_PORT=5580
DATA_DIR=$ANDROID_BUILD_TOP/build/tools/applypatch/testdata
# This must be the filename that applypatch uses for its copies.
CACHE_TEMP_SOURCE=/cache/saved.file
# Put all binaries and files here. We use /cache because it's a
# temporary filesystem in the emulator; it's created fresh each time
# the emulator starts.
WORK_DIR=/system
# partition that WORK_DIR is located on, without the leading slash
WORK_FS=system
# set to 0 to use a device instead
USE_EMULATOR=1
# ------------------------
tmpdir=$(mktemp -d)
if [ "$USE_EMULATOR" == 1 ]; then
emulator -wipe-data -noaudio -no-window -port $EMULATOR_PORT &
pid_emulator=$!
ADB="adb -s emulator-$EMULATOR_PORT "
else
ADB="adb -d "
fi
echo "waiting to connect to device"
$ADB wait-for-device
echo "device is available"
$ADB remount
# free up enough space on the system partition for the test to run.
$ADB shell rm -r /system/media
# run a command on the device; exit with the exit status of the device
# command.
run_command() {
$ADB shell "$@" \; echo \$? | awk '{if (b) {print a}; a=$0; b=1} END {exit a}'
}
testname() {
echo
echo "$1"...
testname="$1"
}
fail() {
echo
echo FAIL: $testname
echo
[ "$open_pid" == "" ] || kill $open_pid
[ "$pid_emulator" == "" ] || kill $pid_emulator
exit 1
}
sha1() {
sha1sum $1 | awk '{print $1}'
}
free_space() {
run_command df | awk "/$1/ {print gensub(/K/, \"\", \"g\", \$6)}"
}
cleanup() {
# not necessary if we're about to kill the emulator, but nice for
# running on real devices or already-running emulators.
testname "removing test files"
run_command rm $WORK_DIR/bloat.dat
run_command rm $WORK_DIR/old.file
run_command rm $WORK_DIR/patch.bsdiff
run_command rm $WORK_DIR/applypatch
run_command rm $CACHE_TEMP_SOURCE
run_command rm /cache/bloat*.dat
[ "$pid_emulator" == "" ] || kill $pid_emulator
rm -rf $tmpdir
}
cleanup
$ADB push $ANDROID_PRODUCT_OUT/system/bin/applypatch $WORK_DIR/applypatch
BAD1_SHA1=$(printf "%040x" $RANDOM)
BAD2_SHA1=$(printf "%040x" $RANDOM)
OLD_SHA1=$(sha1 $DATA_DIR/old.file)
NEW_SHA1=$(sha1 $DATA_DIR/new.file)
NEW_SIZE=$(stat -c %s $DATA_DIR/new.file)
# --------------- basic execution ----------------------
testname "usage message"
run_command $WORK_DIR/applypatch && fail
testname "display license"
run_command $WORK_DIR/applypatch -l | grep -q -i copyright || fail
# --------------- check mode ----------------------
$ADB push $DATA_DIR/old.file $WORK_DIR
testname "check mode single"
run_command $WORK_DIR/applypatch -c $WORK_DIR/old.file $OLD_SHA1 || fail
testname "check mode multiple"
run_command $WORK_DIR/applypatch -c $WORK_DIR/old.file $BAD1_SHA1 $OLD_SHA1 $BAD2_SHA1|| fail
testname "check mode failure"
run_command $WORK_DIR/applypatch -c $WORK_DIR/old.file $BAD2_SHA1 $BAD1_SHA1 && fail
$ADB push $DATA_DIR/old.file $CACHE_TEMP_SOURCE
# put some junk in the old file
run_command dd if=/dev/urandom of=$WORK_DIR/old.file count=100 bs=1024 || fail
testname "check mode cache (corrupted) single"
run_command $WORK_DIR/applypatch -c $WORK_DIR/old.file $OLD_SHA1 || fail
testname "check mode cache (corrupted) multiple"
run_command $WORK_DIR/applypatch -c $WORK_DIR/old.file $BAD1_SHA1 $OLD_SHA1 $BAD2_SHA1|| fail
testname "check mode cache (corrupted) failure"
run_command $WORK_DIR/applypatch -c $WORK_DIR/old.file $BAD2_SHA1 $BAD1_SHA1 && fail
# remove the old file entirely
run_command rm $WORK_DIR/old.file
testname "check mode cache (missing) single"
run_command $WORK_DIR/applypatch -c $WORK_DIR/old.file $OLD_SHA1 || fail
testname "check mode cache (missing) multiple"
run_command $WORK_DIR/applypatch -c $WORK_DIR/old.file $BAD1_SHA1 $OLD_SHA1 $BAD2_SHA1|| fail
testname "check mode cache (missing) failure"
run_command $WORK_DIR/applypatch -c $WORK_DIR/old.file $BAD2_SHA1 $BAD1_SHA1 && fail
# --------------- apply patch ----------------------
$ADB push $DATA_DIR/old.file $WORK_DIR
$ADB push $DATA_DIR/patch.bsdiff $WORK_DIR
# Check that the partition has enough space to apply the patch without
# copying. If it doesn't, we'll be testing the low-space condition
# when we intend to test the not-low-space condition.
testname "apply patches (with enough space)"
free_kb=$(free_space $WORK_FS)
echo "${free_kb}kb free on /$WORK_FS."
if (( free_kb * 1024 < NEW_SIZE * 3 / 2 )); then
echo "Not enough space on /$WORK_FS to patch test file."
echo
echo "This doesn't mean that applypatch is necessarily broken;"
echo "just that /$WORK_FS doesn't have enough free space to"
echo "properly run this test."
exit 1
fi
testname "apply bsdiff patch"
run_command $WORK_DIR/applypatch $WORK_DIR/old.file - $NEW_SHA1 $NEW_SIZE $BAD1_SHA1:$WORK_DIR/foo $OLD_SHA1:$WORK_DIR/patch.bsdiff || fail
$ADB pull $WORK_DIR/old.file $tmpdir/patched
diff -q $DATA_DIR/new.file $tmpdir/patched || fail
testname "reapply bsdiff patch"
run_command $WORK_DIR/applypatch $WORK_DIR/old.file - $NEW_SHA1 $NEW_SIZE $BAD1_SHA1:$WORK_DIR/foo $OLD_SHA1:$WORK_DIR/patch.bsdiff || fail
$ADB pull $WORK_DIR/old.file $tmpdir/patched
diff -q $DATA_DIR/new.file $tmpdir/patched || fail
# --------------- apply patch in new location ----------------------
$ADB push $DATA_DIR/old.file $WORK_DIR
$ADB push $DATA_DIR/patch.bsdiff $WORK_DIR
# Check that the partition has enough space to apply the patch without
# copying. If it doesn't, we'll be testing the low-space condition
# when we intend to test the not-low-space condition.
testname "apply patch to new location (with enough space)"
free_kb=$(free_space $WORK_FS)
echo "${free_kb}kb free on /$WORK_FS."
if (( free_kb * 1024 < NEW_SIZE * 3 / 2 )); then
echo "Not enough space on /$WORK_FS to patch test file."
echo
echo "This doesn't mean that applypatch is necessarily broken;"
echo "just that /$WORK_FS doesn't have enough free space to"
echo "properly run this test."
exit 1
fi
run_command rm $WORK_DIR/new.file
run_command rm $CACHE_TEMP_SOURCE
testname "apply bsdiff patch to new location"
run_command $WORK_DIR/applypatch $WORK_DIR/old.file $WORK_DIR/new.file $NEW_SHA1 $NEW_SIZE $BAD1_SHA1:$WORK_DIR/foo $OLD_SHA1:$WORK_DIR/patch.bsdiff || fail
$ADB pull $WORK_DIR/new.file $tmpdir/patched
diff -q $DATA_DIR/new.file $tmpdir/patched || fail
testname "reapply bsdiff patch to new location"
run_command $WORK_DIR/applypatch $WORK_DIR/old.file $WORK_DIR/new.file $NEW_SHA1 $NEW_SIZE $BAD1_SHA1:$WORK_DIR/foo $OLD_SHA1:$WORK_DIR/patch.bsdiff || fail
$ADB pull $WORK_DIR/new.file $tmpdir/patched
diff -q $DATA_DIR/new.file $tmpdir/patched || fail
$ADB push $DATA_DIR/old.file $CACHE_TEMP_SOURCE
# put some junk in the old file
run_command dd if=/dev/urandom of=$WORK_DIR/old.file count=100 bs=1024 || fail
testname "apply bsdiff patch to new location with corrupted source"
run_command $WORK_DIR/applypatch $WORK_DIR/old.file $WORK_DIR/new.file $NEW_SHA1 $NEW_SIZE $OLD_SHA1:$WORK_DIR/patch.bsdiff $BAD1_SHA1:$WORK_DIR/foo || fail
$ADB pull $WORK_DIR/new.file $tmpdir/patched
diff -q $DATA_DIR/new.file $tmpdir/patched || fail
# put some junk in the cache copy, too
run_command dd if=/dev/urandom of=$CACHE_TEMP_SOURCE count=100 bs=1024 || fail
run_command rm $WORK_DIR/new.file
testname "apply bsdiff patch to new location with corrupted source and copy (no new file)"
run_command $WORK_DIR/applypatch $WORK_DIR/old.file $WORK_DIR/new.file $NEW_SHA1 $NEW_SIZE $OLD_SHA1:$WORK_DIR/patch.bsdiff $BAD1_SHA1:$WORK_DIR/foo && fail
# put some junk in the new file
run_command dd if=/dev/urandom of=$WORK_DIR/new.file count=100 bs=1024 || fail
testname "apply bsdiff patch to new location with corrupted source and copy (bad new file)"
run_command $WORK_DIR/applypatch $WORK_DIR/old.file $WORK_DIR/new.file $NEW_SHA1 $NEW_SIZE $OLD_SHA1:$WORK_DIR/patch.bsdiff $BAD1_SHA1:$WORK_DIR/foo && fail
# --------------- apply patch with low space on /system ----------------------
$ADB push $DATA_DIR/old.file $WORK_DIR
$ADB push $DATA_DIR/patch.bsdiff $WORK_DIR
free_kb=$(free_space $WORK_FS)
echo "${free_kb}kb free on /$WORK_FS; we'll soon fix that."
echo run_command dd if=/dev/zero of=$WORK_DIR/bloat.dat count=$((free_kb-512)) bs=1024 || fail
run_command dd if=/dev/zero of=$WORK_DIR/bloat.dat count=$((free_kb-512)) bs=1024 || fail
free_kb=$(free_space $WORK_FS)
echo "${free_kb}kb free on /$WORK_FS now."
testname "apply bsdiff patch with low space"
run_command $WORK_DIR/applypatch $WORK_DIR/old.file - $NEW_SHA1 $NEW_SIZE $BAD1_SHA1:$WORK_DIR/foo $OLD_SHA1:$WORK_DIR/patch.bsdiff || fail
$ADB pull $WORK_DIR/old.file $tmpdir/patched
diff -q $DATA_DIR/new.file $tmpdir/patched || fail
testname "reapply bsdiff patch with low space"
run_command $WORK_DIR/applypatch $WORK_DIR/old.file - $NEW_SHA1 $NEW_SIZE $BAD1_SHA1:$WORK_DIR/foo $OLD_SHA1:$WORK_DIR/patch.bsdiff || fail
$ADB pull $WORK_DIR/old.file $tmpdir/patched
diff -q $DATA_DIR/new.file $tmpdir/patched || fail
# --------------- apply patch with low space on /system and /cache ----------------------
$ADB push $DATA_DIR/old.file $WORK_DIR
$ADB push $DATA_DIR/patch.bsdiff $WORK_DIR
free_kb=$(free_space $WORK_FS)
echo "${free_kb}kb free on /$WORK_FS"
run_command mkdir /cache/subdir
run_command 'echo > /cache/subdir/a.file'
run_command 'echo > /cache/a.file'
run_command mkdir /cache/recovery /cache/recovery/otatest
run_command 'echo > /cache/recovery/otatest/b.file'
run_command "echo > $CACHE_TEMP_SOURCE"
free_kb=$(free_space cache)
echo "${free_kb}kb free on /cache; we'll soon fix that."
run_command dd if=/dev/zero of=/cache/bloat_small.dat count=128 bs=1024 || fail
run_command dd if=/dev/zero of=/cache/bloat_large.dat count=$((free_kb-640)) bs=1024 || fail
free_kb=$(free_space cache)
echo "${free_kb}kb free on /cache now."
testname "apply bsdiff patch with low space, full cache, can't delete enough"
$ADB shell 'cat >> /cache/bloat_large.dat' & open_pid=$!
echo "open_pid is $open_pid"
# size check should fail even though it deletes some stuff
run_command $WORK_DIR/applypatch -s $NEW_SIZE && fail
run_command ls /cache/bloat_small.dat && fail # was deleted
run_command ls /cache/a.file && fail # was deleted
run_command ls /cache/recovery/otatest/b.file && fail # was deleted
run_command ls /cache/bloat_large.dat || fail # wasn't deleted because it was open
run_command ls /cache/subdir/a.file || fail # wasn't deleted because it's in a subdir
run_command ls $CACHE_TEMP_SOURCE || fail # wasn't deleted because it's the source file copy
# should fail; not enough files can be deleted
run_command $WORK_DIR/applypatch $WORK_DIR/old.file - $NEW_SHA1 $NEW_SIZE $BAD1_SHA1:$WORK_DIR/foo $OLD_SHA1:$WORK_DIR/patch.bsdiff && fail
run_command ls /cache/bloat_large.dat || fail # wasn't deleted because it was open
run_command ls /cache/subdir/a.file || fail # wasn't deleted because it's in a subdir
run_command ls $CACHE_TEMP_SOURCE || fail # wasn't deleted because it's the source file copy
kill $open_pid # /cache/bloat_large.dat is no longer open
testname "apply bsdiff patch with low space, full cache, can delete enough"
# should succeed after deleting /cache/bloat_large.dat
run_command $WORK_DIR/applypatch -s $NEW_SIZE || fail
run_command ls /cache/bloat_large.dat && fail # was deleted
run_command ls /cache/subdir/a.file || fail # still wasn't deleted because it's in a subdir
run_command ls $CACHE_TEMP_SOURCE || fail # wasn't deleted because it's the source file copy
# should succeed
run_command $WORK_DIR/applypatch $WORK_DIR/old.file - $NEW_SHA1 $NEW_SIZE $BAD1_SHA1:$WORK_DIR/foo $OLD_SHA1:$WORK_DIR/patch.bsdiff || fail
$ADB pull $WORK_DIR/old.file $tmpdir/patched
diff -q $DATA_DIR/new.file $tmpdir/patched || fail
run_command ls /cache/subdir/a.file || fail # still wasn't deleted because it's in a subdir
run_command ls $CACHE_TEMP_SOURCE && fail # was deleted because patching overwrote it, then deleted it
# --------------- apply patch from cache ----------------------
$ADB push $DATA_DIR/old.file $CACHE_TEMP_SOURCE
# put some junk in the old file
run_command dd if=/dev/urandom of=$WORK_DIR/old.file count=100 bs=1024 || fail
testname "apply bsdiff patch from cache (corrupted source) with low space"
run_command $WORK_DIR/applypatch $WORK_DIR/old.file - $NEW_SHA1 $NEW_SIZE $BAD1_SHA1:$WORK_DIR/foo $OLD_SHA1:$WORK_DIR/patch.bsdiff || fail
$ADB pull $WORK_DIR/old.file $tmpdir/patched
diff -q $DATA_DIR/new.file $tmpdir/patched || fail
$ADB push $DATA_DIR/old.file $CACHE_TEMP_SOURCE
# remove the old file entirely
run_command rm $WORK_DIR/old.file
testname "apply bsdiff patch from cache (missing source) with low space"
run_command $WORK_DIR/applypatch $WORK_DIR/old.file - $NEW_SHA1 $NEW_SIZE $BAD1_SHA1:$WORK_DIR/foo $OLD_SHA1:$WORK_DIR/patch.bsdiff || fail
$ADB pull $WORK_DIR/old.file $tmpdir/patched
diff -q $DATA_DIR/new.file $tmpdir/patched || fail
# --------------- cleanup ----------------------
cleanup
echo
echo PASS
echo
Reference in a new issue View git blame Copy permalink