Move these tools from $buildDir/.bootstrap/bin to $buildDir/bin
(configurable by the primary builder).
Also delay building them until the main stage, and give them a phony
target "blueprint_tools".
Primary builder logic is becoming complicated due to the two pass nature
of mutators that add dependencies and GenerateBuildActions that handle
the dependencies. The reason why the dependency was added is lost by
the time GenerateBuildActions is called, resulting in build logic that
has to recreate all the dependencies and try to match them up to the
modules returned by VisitDirectDeps.
Change the API of AddDependency to take a DependencyTag interface, which
is satisifed by anything that embeds BaseDependencyTag. Mutators and
GenerateBuildActions that call VisitDirectDeps can pass each Module to
ctx.OtherModuleDependencyTag to retreive the DependencyTag that was
passed when adding the dependency.
Change-Id: I0814dcd26d1670302d340b77e8dc8704ed7b60bf
A common pattern in mutators is to set a property on a module to be used
later in GenerateBuildActions. A common anti-pattern is to set a member
variable instead of a property. Setting member variables will appear to
work until a mutator calls CreateVariations after the member variable is
set. The first variant will have the member variables, but any other
variants will have zero values for all member variables.
To catch this common case early, replace all modules with clones after
running all the mutators but before GenerateBuildActions.
This catches the anti-pattern used in bootstrap, replace the buildStage
member variable with a property.
Change-Id: I6ff37580783a6227ebba2b46d577b443566a79bb
Removing abandoned files needs to know where the .ninja_log file is
stored. Export the ninja builddir value from Context and use it to
determine the .ninja_log path in any stage.
The ninja builddir (where ninja stores its .ninja_log and .ninja_deps
files) and the bootstrap.BuildDir (where build output files are written)
are distinct, so to reduce confusion replace SetBuildDir with
SetNinjaBuildDir.
For implicit dependencies that will be common to all users of a Rule,
add a new field 'CommandDeps' to the RuleParam. This is a list of
strings to be prepended to the implicit dependencies in each BuildParam.
This lets us have the dependencies declared next to where they are used,
instead of duplicated in areas that may be far apart.
I looked at passing this information down to ninja too, but it only
saves us a few percent of ninja file, and requires a modification to the
ninja file format.
Change-Id: Ifd910dee1506d4e32a76ed06206f853c4caec622
This removes the need to use $OLDPWD when running tests, which means
that the builddir may be an absolute or relative directory. It also
filters out the "PASS" message on successful test runs to clean up our
output.
Change-Id: I4ab937c7a87b74fe997a47cc0311e2f357f9f7e9
It's difficult for wrapping scripts to handle -b properly. Just pass
BUILDDIR instead, which is easier to handle. This still accepts -b, so
that incremental builds work across this change.
Now that we have multi-stage bootstrapping, we can make the primary
builder build more dynamic. Add the concept of plugins that will be
linked and loaded into bootstrap_go_binary or bootstrap_go_package
modules. It's expected that the plugin's init() functions will do
whatever registration is necessary.
Example Blueprint definition:
bootstrap_go_binary {
name: "builder",
...
}
bootstrap_go_package {
name: "plugin1",
pluginFor: ["builder"],
}
A package may specify more than one plugin if it will be inserted into
more than one go module.
Change-Id: I109835f444196b66fc4018c3fa36ba0875823184
With the introduction of $buildDir in bootstrapDir, the ninja cleanup
step hasn't been able to cleanup during the bootstrap stages. The main
stage was unaffected, as long as you were using "." as your buildDir.
Change-Id: I277dd7864989f9052d96cab9ce377548a1391a80
The go compiler and linker changed in v1.5 -- to 'go tool compile' and
'go tool link' instead of 6g and 6l. Move the selection logic to
bootstrap.bash, and have it use compile/link if 6g/6l are missing. This
way the build.ninja.in will continue working with either go 1.4 or 1.5.
Travis and the test suite will fail under 1.5, since the build.ninja.in
is still generated with 1.4, and the function names in the comments
differ between 1.4 and 1.5.
To provide a consistent __FILE__ behavior with cpp, we want to be able
to run with SRCDIR="." and the outputs be saved elsewhere. Other tools
within android also expect to be run from $TOP.
Change-Id: I572bce5c9086b0c3310b42065ae98cbf5a1c6399
API Change -- will require changes to any code using bootstrap.BinDir
This way we can put references to other variables in BinDir, and still
be used properly by other packages.
Change-Id: I497424cb254b3a170401ac9420fa0adbf8d11d1e
This splits the current bootstrap stage into two stages:
A bootstrap stage, which like today, a reference is checked into the
tree. It just builds the "core" blueprint binaries -- minibp,
gotestmain, and choosestage. Just enough to build the next stage's ninja
file.
A primary builder stage. This builds the primary builder, the main ninja
file, and any other bootstrap binaries (bpfmt, etc).
The main advantage here is that the checked in file really only contains
references to blueprint -- not the primary builder. This will allow us
to make the primary builder more dynamic, by loading more module types
that may or may not exist in all trees.
It's even possible to reuse the build.ninja.in in the blueprint repo
directly now. We don't currently do that, since we still want to turn on
tests.
Change-Id: I18683891ed7348b0d7af93084e3a68a04fbd5dbc
This simplifies the bootstrap process while making it more flexible by
moving the stage selection into a go binary(choosestage). It will now be
possible to have more than two build stages.
Now each stage has a ninja template(main.ninja.in) and a timestamp
file(main.ninja.in.timestamp). The timestamp file may be updated by any
build stage that wishes to regenerate the ninja template. If the
choosestage binaries sees that the timestamp is newer than the template,
it will choose the prior stage.
The main stage no longer writes to the source tree to update the
build.ninja.in file. This was a problem for read-only source trees.
Instead, the choosestage binary first checks to see if that file is
newer than the last bootstrap.ninja.in, copies it in place, and starts
the boostrap stage.
The bootstrap stage regenerates it's own ninja template, but that
required a loop through the main stage to actually run it. The
choosestage binary now detects if the template has changed for the
current stage, and will restart the stage.
One change is that if dependencies do get messed up, instead of silently
failing, there's a higher chance that the bootstrap step will just
continue looping, doing nothing. This can happen if the main stage
has a dependency that triggers the bootstrap stage, but the bootstrap
stage doesn't see anything required to rebuild the main ninja file. A
side effect of this requirement is that changes to test code will now
rebuild the main ninja file.
Change-Id: I9965cfba79dc0dbbd3af05f5944f7653054455a2
This only checks to make sure that for a given updated file, the
bootstrap stage is properly run. It doesn't actually check to make sure
that anything was rebuilt.
Change-Id: I9cb6ff1d483264da30e43d5580361d93b148f42c
The workaround no longer works with the new stage selector. We may run
bootstrap.ninja.in twice before running the next stage, but we can't
encode whether to run another ninja instance in the checked in
build.ninja.in.
This can likely be solved, but now that there's an official release with
support for multiple passes, just push up the required version.
Change-Id: I76e321912e323d60e462aabec61bdfcc7118cd5e
The primary builder will now generate a rule to call itself with
--docs=.bootstrap/docs/<name>.html to produce an automatically
generated documentation file.
The documentation generation process is:
- Call each factory once to get empty property structs associated
with the module type
- Use reflection to determine the names of the type of each property
struct
- Use the bootstrap_go_package modules from reading the Blueprints files
to find the source files for each Go package used to build the primary
builder
- Use the go/parser module to find the type declaration for each
property struct
- Extract comments for the property struct and each property declaration
- Format all the comments into HTML
Change-Id: Icae9307cc10549a30bfc14d6922824099de5a9b0
Users that want to enable this option can use the '-t' option to
bootstrap.bash when passing '-r'. Builders that want to enable this can
set the RUN_TESTS environment variable in their bootstrap.bash.
The gotestmain tools is needed to write the main functions for the test
binaries, since 'go test' doesn't work well in this environment.
Change-Id: Iec5c2b5c9c3f5e3ba0ac8677fb88f5e963f9bd3f
Make integrating with go tools easier by putting the blueprint package
files in the top level directory of the git project instead of in a
subdirectory called blueprint.
Change-Id: I35c144c5fe7ddf34e478d0c47c50b2f6c92c2a03
2015-01-23 14:23:27 -08:00
Renamed from blueprint/bootstrap/bootstrap.go (Browse further)
