Throw an error if run into a module without a name when generating
contexts.
Test: context_test.go
Change-Id: I3976d86d1f15b8ac10a7a38aa42ae277740a8f3b
Instead of sometimes re-running minibp/the primary builder during the
next phase, run bpglob earlier to check dependencies.
We've run into issues where the environment is slightly different
between bootstrapping phase and the main build phase. It's also a
problem because our primary builder (Soong) exports information used by
another tool (Kati) that runs in between the bootstrapping phases and
the main phase. When Soong would run in the main phase, it could get out
of sync, and would require the build to be run again.
To do this, add a "subninja" include a build-globs.ninja file to each
build.ninja file. The first time, this will be an empty file, but we'll
always run minibp / the primary builder anyway. When the builder runs,
in addition to writing a dependency file, write out the
build-globs.ninja file with the rules to run bpglob.
Since bpglob may need to be run very early, before it would normally be
built, build it with microfactory.
Change-Id: I89fcd849a8729e892f163d40060ab90b5d4dfa5d
WalkDeps was following every possible path through the dependency
tree, which can be enormous. Modify it to only call visit for
any particular (child, parent) pair once for each direct dependency
by not recursing into child if visitDown returns true but child
has already been visited.
Test: TestWalkDeps, TestWalkDepsDuplicates
Change-Id: Ieef28399bd10e744417cdeb661dfa04fbeb4ec60
Allow adding multiple dependencies on the same module. Adds a flag
to Context.walkDeps to determine whether dependencies should be
visited multiple times, and clarifies the behavior of
VisitDepsDepthFirst (continues to visit each module once, even if
there are multiple dependencies on it) and VisitDirectDeps (may
visit a module multiple times).
Test: TestWalkDepsDuplicates, TestVisit
Change-Id: I58afbe90490aca102d242d63e185386e1fe55d73
Running with the data race detector enabled hits a 8192 active
goroutine limit. Reduce the maximum number of active goroutines
by limiting parallelVisit to 1000 goroutines. Also rewrite
cloneModule in terms of parallelVisit.
Change-Id: Icdd63648e8e010557b624e12592156490b40adb9
This makes it easy for users of Glob to detect whether the match is a
file or directory. Doing the check at this level means that the filelist
file used as a dependency will be updated if a directory is replaced
with a file of the same name, or vice versa.
Change-Id: I79ebba39327218bcdcf50b393498306119de9d6c
Bug: 65683273
Test: build/soong/scripts/diff_build_graphs.sh \
'build/blueprint:work^^^' 'build/blueprint:work'
Test: put a syntax error in a file and see that the
reported error reports the location of the violation
Change-Id: Iaeedb91ea8e816cb8e9ee954f21cd6c6bc4afa48
To allow it to validate that the filename equals Android.bp
Bug: 65683273
Test: m -j nothing # which runs tests
Change-Id: I171dddd102590df558053b615d39c75c00b6ac6e
in facilitate moving name resolution to Soong
Bug: 65683273
Test: build/soong/scripts/diff_build_graphs.sh \
--products=aosp_arm \
'build/blueprint:work^' 'build/blueprint:work'
# and see that the only changes were:
# 1. adding the name_interface.go file
# 2. changing some line numbers
Change-Id: Ifa7603cca59b3b3d592f2f146fdafe57012bd4b9
PreSingletons use the same interface as Singletons, but run after
parsing all the blueprint files but before running any mutators
or GenerateBuildActions. They can be used to perform global setup,
including generating rules, that may be referenced by later
mutator or generate passes.
Test: m checkbuild
Change-Id: I4b93425a724e739f5b8843262efb8804b3bf3531
because there some symlinks named Android.bp that point to
files named Android.bp that contain <subdir> entries that
are supposed to be interpreted relative to the original
symlink. It's more convenient to just skip following subdirs.
Bug: 64363847
Test: make -j
Change-Id: Ib15f1d1c7d511191fd841b1a29ceed559dd6cdbb
Bug: 64600838
Test: mkdir errtest \
&& ln -s /tmp/dontexist errtest/Android.bp \
# and add errtest to ./Android.bp \
&& m nothing \
# and check that the error message mentions a symlink
Change-Id: I841ec12d613f61ccc3396538062bee48c8c1ca27
Propagate extra ninja file deps through mutators so that they
can use ctx.AddNinjaFileDeps.
Test: blueprint tests
Change-Id: I299a0665c3f63b020ae345889fd78b91b91b215a
Allow a module to create other modules as if they were specified
in a blueprint file. CreateModule takes the name of a module type,
calls the factory function the module type, and then inserts
properties into the property structs returned by the factory.
Bug: 64161749
Test: TestCreateModule
Change-Id: Ic1903305d6b08eae1edc7f0fb4137e85544aac0f
The next patch will introduce creating new modules, so rename the
current variable that contains new variations of existing modules
to avoid confusion.
Test: blueprint tests
Change-Id: Ic1d3824e54e51c282a08f8ecef8fc658cc503a65
Darwin has a default limit of 256 open files per process. Parsing
too many blueprint files in parallel can hit the limit. Cap the
concurrency at 200.
Test: manual testing with limit set to 32
Change-Id: Ic64d21d2c0ffd7c86bf3f02fb51216ee5684a80c
Instead of just saying:
error: .../Android.bp:48:1: dependency "libc++" of "libtest" missing variant "arch:android_arm_armv7-a, link:shared, vndk:"
Include a list of currently existing variants:
error: .../Android.bp:48:1: dependency "libc++" of "libtest" missing variant:
arch:android_arm_armv7-a, link:shared, vndk:
available variants:
arch:android_arm_armv7-a, link:shared
arch:linux_x86, link:shared
arch:linux_x86_64, link:shared
arch:windows_x86, link:shared
arch:windows_x86_64, link:shared
This still isn't the best experience for users, but it at least provides
enough information for someone more familiar with the build to
understand the problem.
It is not allowed to directly use BaseDependencyTag as customized
user dependency tag passed down to BP since it might cause issues
that different type of modules will be mixed when fetched based on
Tag.
Add globbing to filesystem mocking so that more code can be tested
against the mock. Also moves the filesystem mock to pathtools,
and renames pathtools.GlobWithExcludes to pathtools.Glob, replacing
the existing pathtools.Glob.
Test: blueprint tests
Change-Id: I722df8121bc870c4a861d7c249245c57dcb607be
Mutator context goroutines appending directly to the global Context's
replacements list causes a data race. Send them over a channel
instead.
The renames and replacements are local to the mutator, so move them
out of Context and into the runMutator method.
Change-Id: I797edb1e27ee29f8946c58101b40fcfb50a32eb9
Bypassing c.glob() and using filepath.Glob() directly for non-glob
paths does not add dependencies on directories that contain missing
files. For optional_subdirs, this means no dependency is added to
rerun the primary builder when an Android.bp file is added to an
optional_subdirs directory. Always use c.glob(), for the non-optional
case it will not insert any dependencies if the file exists (as tested
by glob_test.go's no-wild tests), and if the file doesn't exist the
len(matches) == 0 will error out.
Change-Id: I370479c6e89f5ff590897702e256256a4dca6952
Add globbing with dependency checking to blueprint. Calling
ModuleContext.GlobWithDeps or SingletonContext.GlobWithDeps will return
a list of files that match the globs, while also adding efficient
dependencies to rerun the primary builder if a file that matches the
glob is added or removed.
Also use the globbing support for optional_subdirs=, subdirs= and build=
lines in blueprints files. The globbing slightly changes the behavior
of subname= lines, it no longer falls back to looking for a file called
"Blueprints". Blueprint files that need to include a subdirectory with
a different name can use build= instead of subdir= to directly include
them. The Blueprints file is updated to reset subname="Blueprints" in
case we want to include subdirectories inside blueprint and the primary
builder has changed the subname.
Also adds a new test directory that contains a simple primary builder
tree to test regeneration for globbing, and runs the tests in travis.
Change-Id: I83ce525fd11e11579cc58ba5308d01ca8eea7bc6
ReplaceDependencies allows a module to replace dependencies on a
matching variant of a target module with itself.
Change-Id: I22946dec23c38ed5e1ad23b87121d72668268c01
Allow modules to be renamed by mutators. This will allow modules to
dynamically adapt to the presence or absence of modules with the same
name. For example, if a source module does not exist, a prebuilt module
could rename itself to the name of the source module so that
dependenices on the module name are satisified.
Change-Id: I44004604c6d9db041bb7d38fe6c1ca877bc7d6f1
Remove the assumed Name and Deps properties. Instead, ask the Module
for the Name, and require them to use the existing replacements for
Deps.
Change-Id: I729045d86277686078b3aa0bba71c67d612ead2c
Blueprint files included with build= statements were not adding a
dependency to cause regenerating when they were changed.
Bug: 32085516
Test: touch external/boringssl/sources.bp && mmma -j external/boringssl
Change-Id: Id4fdf3b6788ae5c1e94547dc63ec6b55424a66a0
Don't add a "_" to the variant name if the variation name is empty. For
example, when splitting a variant with name "foo" into variations "" and
"bar", the new variants would be named "foo" and "foo_bar" instead of
"foo_" and "foo_bar".
Change-Id: I82342d57e2a8e9f2d65a7d8d2872dcb7b3512899
runMutators was sending the wrong value into errsCh, hiding all errors.
parallelVisit had a data race on error, send the cancel signal over a
channel instead of writing to a bool from a goroutine.
Change-Id: I18919d71464c094db5846badbfac80f99366d70c
Convert parallelVisitAllBottomUp into a generic parallelVisit that takes
a visitOrderer to select top down or bottom up. Combine
runTopDownMutator and runBottomUpMutator into runMutators that takes a
mutatorDirection to select the visitOrderer for parallelVisit and which
function pointer in the mutatorInfo to run. Optimize out the
updateDependencies to only run if dependencies have been modified to
avoid running it after TopDownMutators that cannot modify dependencies.
Change-Id: Ib00302db1108ebab2ce8e01b20aa026140d382a4
cloneModules duplicates every module, which can be slow. Spawn a new
goroutine for each module to spread the factory and CopyProperties calls
over multiple cpus.
Change-Id: I2597f921dadfd321ccb705aec9a904c71b75f9ef
