Changes:
- Cut off "prebuilt_" prefix from `dep`, not `libName`, because `dep` is
used to replace library name in `usesLibraryProperties`, and these
properties are specified without "prebuilt_" prefix.
- Do not remove "prebuilt_" prefix on the return value of
`ProvidesUsesLib()`: this boils down to `provides_uses_lib` property
which is specified without the prefix.
Bug: 193425964
Test: $ lunch aosp_cf_x86_64_phone-userdebug && m && launch_cvd
$ adb wait-for-device && \
adb root && \
adb logcat | \
grep -E 'ClassLoaderContext [a-z ]+ mismatch' -C1
# empty output, no errors
Change-Id: I6cb65040027023d12ca0bc132d60c2c245174c40
Previously, the java_import and java_sdk_library_import modules did not
make their permitted_packages available to the rule that generates the
updatable-bcp-packages.txt file. This change corrects that.
Bug: 193763688
Test: m nothing
- Added unit tests, which all failed and then fixed the tests.
Change-Id: If0706e4551a331b48d383123088e63924dded48b
Previously, permitted_packages were not copied to the sdk snapshot.
This change corrects that.
Bug: 193763688
Test: m nothing
- Added unit tests, which all failed and then fixed the tests.
Change-Id: I4560987f746f78c0ae706058195b6db4bea438aa
There is no need to check as `TrimPrefix` does nothing if the prefix
doesn't match (see https://pkg.go.dev/strings#TrimPrefix).
Bug: 193425964
Test: m nothing
Change-Id: Ieb82e72a471800e29eb6bb54308041a9ab4173e5
Bug: 188179858
Test: compare dexpreopt_config.zip files from
1. TARGET_BUILD_UNBUNDLED_IMAGE=true m dexpreopt_config_zip
2. m dexpreopt_config_zip
(note that m clean should run between steps)
Change-Id: I36a6e8b10b9922cc5522accaf90af1aa05049a86
Even though actual installed module path is the same as source module,
it uses impl's one.
Bug: 188179858
Bug: 193082464
Test: compare dexpreopt_config.zip files from
1. TARGET_BUILD_UNBUNDLED_IMAGE=true m dexpreopt_config_zip
2. m dexpreopt_config_zip
(note that m clean should run between steps)
Test: build aosp_cf_x86_64_phone, launch_cvd, and then
adb wait-for-device \
&& adb root \
&& adb logcat \
| grep -E 'ClassLoaderContext [a-z ]+ mismatch' -C 1
and then check if there is no message.
Change-Id: I34ffd9a2d214a6614c2befc35b2beec003cfcd25
This change moves the definitions of the following libraries which
directly include ART, conscrypt and i18n stubs, and their associated
java_system_modules from libcore to build/soong/java/core-libraries.
* core.current.stubs
* core-current-stubs-system-modules
* core.module_lib.stubs
* core-module-lib-stubs-system-modules
* legacy.core.platform.api.stubs
* legacy-core-platform-api-stubs-system-modules
* stable.core.platform.api.stubs
* stable-core-platform-api-stubs-system-modules
Bug: 193311122
Test: m droid
Change-Id: I42c4a0b5322897d40ecf41de088152dbdc526c96
Previously, when building from prebuilts boot no rules were created to
produce the boot image files for the host, i.e. the OS on which the
build was running. That caused problems with checkbuilds. No rules were
produced as there was no host variant of a prebuilt apex to provide
them.
This change restructures the code to allow the prebuilt bootclasspath
fragment to build the host variants of the files from the dex files
provided by the prebuilt APEX. The generated files will not be the same
as they would be if built from source as there is no boot image profile
to use but it should be sufficient to satisfy the checkbuild target and
allow for host side testing.
Bug: 192575099
Test: m SOONG_CONFIG_art_module_source_build=false droid dist checkbuild
Change-Id: I6af00f19bb71aa18dd462f5eac6aa38e3e721023
Previously, boot image generation used GetCachedGlobalSoongConfig(ctx)
in order to get access to the GlobalSoongConfig. That required that
some other part of the code had called GetGlobalSoongConfig(ctx) to
initialize the cached value. That was left over from when the boot
image generation was done in a singleton which could not call
GetGlobalSoongConfig(ctx) directly. That is no longer true.
This change switches the uses of GetCachedGlobalSoongConfig(ctx) to
GetGlobalSoongConfig(ctx) and removes the now unnecessary call to
GetGlobalSoongConfig(ctx) from outside the functions.
Bug: 192575099
Test: m nothing
Change-Id: I34b7b1526d072d8b09fda7caa96e381695888e16
Previously, the boot zip file, containing all the boot image files for
all the supported architectures, was only created from source. It was
not created when building from a prebuilt_bootclasspath_fragment. That
lead to build failures when building from ART prebuilts.
This change pulls the boot zip file creation out so that it can be done
for both source and prebuilt bootclasspath_fragment modules as well as
for the platform_bootclasspath module.
Bug: 192575099
Test: m out/target/product/generic_arm64/boot.zip
m SOONG_CONFIG_art_module_source_build=false out/target/product/generic_arm64/boot.zip
- Compare the output of the first command from before the change
with the output from them both after and confirm that when the
ART prebuilts are up to date with the source that there are no
differences.
Change-Id: Ie7dd5e2ca4a865d06fd9ebf87320cf68c4d05bc3
Previously, bootclasspath_fragment modules would only perform hidden
API processing if they provided some stub libraries and fragments. That
was needed because the bootclasspath_fragment modules were added before
Soong supported hidden API processing on all the different modules and
before they all provided the necessary information that hidden API
processing required.
This change stops hidden API being conditional as it is no longer
required as it has been enabled on all existing bootclasspath_fragment
modules.
Bug: 179354495
Test: m nothing
Change-Id: Ibf81a7de63b888a3ebf445528326fa6101fdb1ba
Unless the prebuilt dex jar files are explicitly required to build
system images or dex preopting defer reporting of any missing dex boot
jars from Soong to Ninja.
This will prevent builds that contain prebuilt sdks, containing prebuilt
bootclasspath_fragment modules but without a corresponding apex_set or
prebuilt_apex module from failing even when it is not building against
the prebuilt sdk.
Bug: 179354495
Test: m nothing
Merged-In: Ibde3bf840a7413785cd32bd6cea1c322f90c59af
Change-Id: Ibde3bf840a7413785cd32bd6cea1c322f90c59af
(cherry picked from commit ef083c9556)
Previously, if a bootclasspath_fragment had both a java_sdk_library
module and one of its components in stub_libs properties they would be
treated as separate modules instead of simply different APIs from the
same module. That would result in them both providing stub dex jars to
"hiddenapi list" which would fail because it found duplicate
definitions of the same class.
e.g. Specifying something like this:
api: {
stub_libs: [
"art.module.public.api",
],
},
core_platform_api: {
stub_libs: [
"art.module.public.api.stubs.module_lib",
],
},
would cause "hiddenapi list" to fail because it would have been passed
paths to two dex jars (actually the same dex jar but that does not
matter) each of which defined the same class, e.g. java.lang.Object.
This change treats the "art.module.public.api.stubs.module_lib" and
"art.module.public.api" modules as being the same for the purposes of
hidden API processing.
(cherry picked from commit 3f0290ef79)
Bug: 192446466
Test: m nothing
Merged-In: I9de96337f64f26e24cff040d4bbed9eecc67b1ed
Change-Id: I9e1cb82bea96022faaec98edc0c9ea7eac6204b0
Previously, bootclasspath_fragment modules would only perform hidden
API processing if they provided some stub libraries and fragments. That
was needed because the bootclasspath_fragment modules were added before
Soong supported hidden API processing on all the different modules and
before they all provided the necessary information that hidden API
processing required.
This change stops hidden API being conditional as it is no longer
required as it has been enabled on all existing bootclasspath_fragment
modules.
Bug: 179354495
Test: m nothing
Change-Id: I0cbf11986adff1f2f967b96f86e6bfe0e9b8b1ef
Before this fix, compiling a java_library against sdk_version:
"module_current" can't use the @SystemApi(MODULE_LIBRARIES) provided
by the ART module because the system module "core-current-stubs-system-modules"
contains only the public APIs.
Use the new system module with module lib APIs.
(cherry picked from commit b54f5aa359)
Bug: 183097033
Test: m droid
Merged-In: I274e2710d1ff34e896aa620bfafb4481180c53b5
Change-Id: I374bc4899ef8f60344e37a94ad3cb8492f47fb4d
Previously, if a bootclasspath_fragment had both a java_sdk_library
module and one of its components in stub_libs properties they would be
treated as separate modules instead of simply different APIs from the
same module. That would result in them both providing stub dex jars to
"hiddenapi list" which would fail because it found duplicate
definitions of the same class.
e.g. Specifying something like this:
api: {
stub_libs: [
"art.module.public.api",
],
},
core_platform_api: {
stub_libs: [
"art.module.public.api.stubs.module_lib",
],
},
would cause "hiddenapi list" to fail because it would have been passed
paths to two dex jars (actually the same dex jar but that does not
matter) each of which defined the same class, e.g. java.lang.Object.
This change treats the "art.module.public.api.stubs.module_lib" and
"art.module.public.api" modules as being the same for the purposes of
hidden API processing.
Bug: 192446466
Test: m nothing
Change-Id: I9de96337f64f26e24cff040d4bbed9eecc67b1ed
When generating zip archive with zip2zip wildcard mask is specified.
Bash attempts to resolve wildcard **/*.class. If android build
top directory containts subfolder(s) with .class, bash wildcard
resolution succeeds. Bash passes list of files to zip2zip instead
of actual wildcard. Created archive doesn't contain required files.
Adding quotes to wildcard to prvent that.
Bug: NA
Test: manual - build with coverage enabled
Change-Id: Iebdaa32693fe820f0f79588d61cb89660ea2b611
Sometimes the stem property is set to change both the installed file
name and the name use to filter the configured module list, e.g. when
adding a test library to replace the standard library, e.g. test_foo
instead of foo.
Sometimes it is used just to change the installed file name.
This change uses both to filter the updatable boot jars and not just
the stem.
Bug: 180105615
Test: m nothing
Change-Id: I6c459fc3597b1e4f062bc9a4e52843305b538c5f
The target is used to generate api_versions.xml file used by Android
Lint, point it to the system stubs in prebuilts/sdk/.
Bug: 190665366
Test: m framework-doc-system-stubs
Change-Id: I27fbad9eb1d84792901974674cbd85f0994bc9f1
Before this fix, compiling a java_library against sdk_version:
"module_current" can't use the @SystemApi(MODULE_LIBRARIES) provided
by the ART module because the system module "core-current-stubs-system-modules"
contains only the public APIs.
Use the new system module with module lib APIs.
Bug: 183097033
Test: m droid
Change-Id: I274e2710d1ff34e896aa620bfafb4481180c53b5
srcFiles is passed to Lint, and given it both the srcjars and the
expanded sources from the srcjars confuses it about which files are
generated. Remove srcjars from srcFiles after handling them.
Bug: 192245952
Test: m lint-check
Change-Id: Ic57d1c623f4cac7cd79f1342bac4b51bd2535ac3
Unless the prebuilt dex jar files are explicitly required to build
system images or dex preopting defer reporting of any missing dex boot
jars from Soong to Ninja.
This will prevent builds that contain prebuilt sdks, containing prebuilt
bootclasspath_fragment modules but without a corresponding apex_set or
prebuilt_apex module from failing even when it is not building against
the prebuilt sdk.
Bug: 179354495
Test: m nothing
Change-Id: Ibde3bf840a7413785cd32bd6cea1c322f90c59af
Now, android_app_import can use apk from other modules like genrule.
Bug: 192200378
Test: m com.android.compos
Change-Id: I5823fdb53b6aa20bfd9ec4dd16aafe63e65b6b68
Previously, the stub dex jars for each HiddenAPIScope was created by
merging the stub dex jars provided by each module for that scope. Then
the widest stub dex jars were chosen. So, if module A provided public,
system and test stub dex jars and module B provided only public then
the stub dex jars for each scope would be:
* public -> A,B
* system -> A
* test -> A
So, the widest API scope for which there are stub dex jars is "test"
and so the widest stub dex jars would just come from module A and not
module B. So, when "hiddenapi list" is run for module C which depends
on modules A and B it only gets given stub dex jars for module A which
means that it cannot resolve all the types that C may use which can
lead to incorrect flags being generated.
This change does not merge the stub dex jars from each module together
and instead keeps them separate by module. The widest stub dex jars
list is constructed by asking each module in turn for their widest stub
dex jars. e.g. Given the above example we would have:
Module A:
* public
* system
* test <- widest
Module B:
* public <- widest
So, the widest stub dex jars will be A's test and B's public stub dex
jars.
Bug: 179354495
Test: m out/soong/hiddenapi-flags.csv
- make sure that this does not change the file.
Merged-In: Ib137825ebffe94b2bf220732bae6077f7b7ac6db
Change-Id: Ib137825ebffe94b2bf220732bae6077f7b7ac6db
(cherry picked from commit 280a31aac3)
The widest stub dex jars should include the widest stub dex jars
provided by each module. So, if module A has public, system and test
and module B has only public then the widest stub dex jars should
include module A's test and module B's public stub dex jars. Instead,
they just include module A's test.
That behaviour is needed so that when the "hiddenapi list" tool is run
against a module C that it is passed stub dex jars from both module A
and module B so that any references to the types provided by those APIs
can be resolved.
A follow up change will fix this issue.
Bug: 179354495
Test: m nothing
Merged-In: Ibd31964e8d2a33fa92fbd0b800c9fe054ee359c7
Change-Id: Ibd31964e8d2a33fa92fbd0b800c9fe054ee359c7
(cherry picked from commit d2b1e0ca92)
When generating the stub-flags.csv for a bootclasspath_fragment the
hiddenapi list tool is not given a complete set of all classes and
members. This change causes it to ignore them by passing the new
--fragment option to it.
This does not risk changing the flags as the stub-flags.csv files
created with the --fragment option are compared with the monolithic
out/soong/hiddenapi/hiddenapi-stub-flags.txt file which is not run
with this option to ensure that they match.
Bug: 179354495
Test: m out/soong/hiddenapi-stub-flags.csv
- make sure that this does not change the file.
Merged-In: I890c7374c445759cade4d685f51e81261b7ccea2
Change-Id: I890c7374c445759cade4d685f51e81261b7ccea2
(cherry picked from commit 156b5d3b61)
Previously, the stub dex jars for each HiddenAPIScope was created by
merging the stub dex jars provided by each module for that scope. Then
the widest stub dex jars were chosen. So, if module A provided public,
system and test stub dex jars and module B provided only public then
the stub dex jars for each scope would be:
* public -> A,B
* system -> A
* test -> A
So, the widest API scope for which there are stub dex jars is "test"
and so the widest stub dex jars would just come from module A and not
module B. So, when "hiddenapi list" is run for module C which depends
on modules A and B it only gets given stub dex jars for module A which
means that it cannot resolve all the types that C may use which can
lead to incorrect flags being generated.
This change does not merge the stub dex jars from each module together
and instead keeps them separate by module. The widest stub dex jars
list is constructed by asking each module in turn for their widest stub
dex jars. e.g. Given the above example we would have:
Module A:
* public
* system
* test <- widest
Module B:
* public <- widest
So, the widest stub dex jars will be A's test and B's public stub dex
jars.
Bug: 179354495
Test: m out/soong/hiddenapi-flags.csv
- make sure that this does not change the file.
Change-Id: Ib137825ebffe94b2bf220732bae6077f7b7ac6db
The widest stub dex jars should include the widest stub dex jars
provided by each module. So, if module A has public, system and test
and module B has only public then the widest stub dex jars should
include module A's test and module B's public stub dex jars. Instead,
they just include module A's test.
That behaviour is needed so that when the "hiddenapi list" tool is run
against a module C that it is passed stub dex jars from both module A
and module B so that any references to the types provided by those APIs
can be resolved.
A follow up change will fix this issue.
Bug: 179354495
Test: m nothing
Change-Id: Ibd31964e8d2a33fa92fbd0b800c9fe054ee359c7
When generating the stub-flags.csv for a bootclasspath_fragment the
hiddenapi list tool is not given a complete set of all classes and
members. This change causes it to ignore them by passing the new
--fragment option to it.
This does not risk changing the flags as the stub-flags.csv files
created with the --fragment option are compared with the monolithic
out/soong/hiddenapi/hiddenapi-stub-flags.txt file which is not run
with this option to ensure that they match.
Bug: 179354495
Test: m out/soong/hiddenapi-stub-flags.csv
- make sure that this does not change the file.
Change-Id: I890c7374c445759cade4d685f51e81261b7ccea2
When this file was initially created by extracting the test from the
java_test.go file it was not added to Android.bp file so was not being
built and tested as it should. That lead to a recent change that left
it unable to compile. This change corrects both those issues.
Bug: 186723288
Bug: 179354495
Test: m nothing
Change-Id: I06f32bb572f57b6df3c772f1d9d21fe323fbf353
Previously, hidden API processing could only be done by those
bootclasspath_fragment modules that either did not depend on any other
fragments (e.g. art-bootclasspath-fragment) or only depended on APIs
provided by other fragments (e.g. i18n-bootclasspath-fragment). That
meant that modules like com.android.os.statsd-bootclasspath-fragment
that depended on APIs provided by parts of the platform which are not
yet part of another bootclasspath_fragment could not perform hidden
API processing.
This change adds support for a bootclasspath_fragment to specify the
additional stubs needed to perform hidden API processing. It adds a new
additional_stubs property that can be used to specify the additional
stub libraries.
Most bootclasspath_fragments that need to use the property will need
access to the APIs provided by the android-non-updatable.* libraries.
Rather than have each fragment explicitly specify the correct module
for each scope it treats "android-non-updatable" as if it was a
java_sdk_library that can provide different jars for each scope.
Soong will handle mapping that to the correct android-non-updatable.*
module.
Bug: 179354495
Test: m out/soong/hiddenapi/hiddenapi-flags.csv \
out/soong/hiddenapi/hiddenapi-index.csv \
out/soong/hiddenapi/hiddenapi-stub-flags.txt \
out/soong/hiddenapi/hiddenapi-unsupported.csv
- make sure that this change does not change the contents.
m TARGET_BUILD_APPS=Calendar nothing
Merged-In: Ia8b79830ed0e6d42100de03d76b0c51b7f6c8ade
Change-Id: Ia8b79830ed0e6d42100de03d76b0c51b7f6c8ade
(cherry picked from commit 5cca7c44e5)
Bug: 179354495
Test: m out/soong/hiddenapi/hiddenapi-stub-flags.txt
- check that an error is reported if a modular stub-flags.csv file,
i.e. one created by a fragment is not a subset of the monolithic
file, e.g. because a signature in the modular file has different
flags than it does in the monolithic or is not present there.
Merged-In: I46ebb495cb093a5e3abe7571c49933c845318549
Change-Id: I46ebb495cb093a5e3abe7571c49933c845318549
(cherry picked from commit 2e88097152)
Previously, the func created a rule and returned it for the caller to
create with the appropriate name and description. This change passes
the name and description into the func and causes it to create the rule
itself. The func is also renamed to make it more consistent with the
other similar rules.
Bug: 179354495
Test: m nothing
Merged-In: I2a4455daa8a6090ed5568994b255848d063e1ab2
Change-Id: I2a4455daa8a6090ed5568994b255848d063e1ab2
(cherry picked from commit 4539a37a61)
Lint's NewApi checks currently produce a lot of false positive findings.
The filtered lint database removes information of classes defined by
mainline modules which are the cases that might become a false positive.
This commit updates soong to use this database instead of the normal one
when linting mainline modules.
Test: m lint-check
Fixes: 186478867
Change-Id: Ica646081b9189303c393b36b2f02914d69eee291
Merged-In: Ica646081b9189303c393b36b2f02914d69eee291
Although the hidden API runtime does not support a module-lib API flag
the hidden API processing does need to used them as they are needed by
the "hiddenapi list" tool for any bootclasspath_fragment module whose
contents builds against an sdk_version of "module_current". Without it
the "hiddenapi list" tool could fail to resolve references to classes
provided by other modules which would break the build.
Bug: 179354495
Test: m out/soong/hiddenapi/hiddenapi-flags.csv
- make sure that this change has no effect on the generated flags.
Merged-In: I3ecb80fdaeba0e66d1ee25cb57152ab546d9bfe0
Change-Id: I3ecb80fdaeba0e66d1ee25cb57152ab546d9bfe0
(cherry picked from commit b51db2ed8e)
Previously, the hidden API processing used SdkKind to identify the API
scopes, e.g. public, system, etc. that are of interest for hidden API
processing. Unfortunately, there is a mismatch between the SdkKind and
what hidden API processing needs. e.g. SdkKind includes values that are
not used by hidden API processing and hidden API processing needs
additional API scope specific information not provided by SdkKind. The
apiScope struct used in sdk_library.go is also not a suitable
representation for similar reasons.
This change adds the HiddenAPIScope (following a similar approach as
apiScope) that rectifies that and uses it as a replacement for SdkKind
in most parts of the hidden API processing. The SdkKind is still used
for retrieving information from java_sdk_library[_import] modules.
Follow up changes will extend the HiddenAPIScope with more information.
Bug: 179354495
Test: m out/soong/hiddenapi/hiddenapi-flags.csv
- make sure that this change has no effect on the generated flags.
Merged-In: I97968f58535121652852b8d25217aa288afd2bfd
Change-Id: I97968f58535121652852b8d25217aa288afd2bfd
(cherry picked from commit 31fad800a7)
Previously, hidden API processing could only be done by those
bootclasspath_fragment modules that either did not depend on any other
fragments (e.g. art-bootclasspath-fragment) or only depended on APIs
provided by other fragments (e.g. i18n-bootclasspath-fragment). That
meant that modules like com.android.os.statsd-bootclasspath-fragment
that depended on APIs provided by parts of the platform which are not
yet part of another bootclasspath_fragment could not perform hidden
API processing.
This change adds support for a bootclasspath_fragment to specify the
additional stubs needed to perform hidden API processing. It adds a new
additional_stubs property that can be used to specify the additional
stub libraries.
Most bootclasspath_fragments that need to use the property will need
access to the APIs provided by the android-non-updatable.* libraries.
Rather than have each fragment explicitly specify the correct module
for each scope it treats "android-non-updatable" as if it was a
java_sdk_library that can provide different jars for each scope.
Soong will handle mapping that to the correct android-non-updatable.*
module.
Bug: 179354495
Test: m out/soong/hiddenapi/hiddenapi-flags.csv \
out/soong/hiddenapi/hiddenapi-index.csv \
out/soong/hiddenapi/hiddenapi-stub-flags.txt \
out/soong/hiddenapi/hiddenapi-unsupported.csv
- make sure that this change does not change the contents.
m TARGET_BUILD_APPS=Calendar nothing
Change-Id: Ia8b79830ed0e6d42100de03d76b0c51b7f6c8ade
Bug: 179354495
Test: m out/soong/hiddenapi/hiddenapi-stub-flags.txt
- check that an error is reported if a modular stub-flags.csv file,
i.e. one created by a fragment is not a subset of the monolithic
file, e.g. because a signature in the modular file has different
flags than it does in the monolithic or is not present there.
Change-Id: I46ebb495cb093a5e3abe7571c49933c845318549
Previously, the func created a rule and returned it for the caller to
create with the appropriate name and description. This change passes
the name and description into the func and causes it to create the rule
itself. The func is also renamed to make it more consistent with the
other similar rules.
Bug: 179354495
Test: m nothing
Change-Id: I2a4455daa8a6090ed5568994b255848d063e1ab2
Lint's NewApi checks currently produce a lot of false positive findings.
The filtered lint database removes information of classes defined by
mainline modules which are the cases that might become a false positive.
This commit updates soong to use this database instead of the normal one
when linting mainline modules.
Test: m lint-check
Fixes: 186478867
Change-Id: Ica646081b9189303c393b36b2f02914d69eee291
Although the hidden API runtime does not support a module-lib API flag
the hidden API processing does need to used them as they are needed by
the "hiddenapi list" tool for any bootclasspath_fragment module whose
contents builds against an sdk_version of "module_current". Without it
the "hiddenapi list" tool could fail to resolve references to classes
provided by other modules which would break the build.
Bug: 179354495
Test: m out/soong/hiddenapi/hiddenapi-flags.csv
- make sure that this change has no effect on the generated flags.
Change-Id: I3ecb80fdaeba0e66d1ee25cb57152ab546d9bfe0
Previously, the hidden API processing used SdkKind to identify the API
scopes, e.g. public, system, etc. that are of interest for hidden API
processing. Unfortunately, there is a mismatch between the SdkKind and
what hidden API processing needs. e.g. SdkKind includes values that are
not used by hidden API processing and hidden API processing needs
additional API scope specific information not provided by SdkKind. The
apiScope struct used in sdk_library.go is also not a suitable
representation for similar reasons.
This change adds the HiddenAPIScope (following a similar approach as
apiScope) that rectifies that and uses it as a replacement for SdkKind
in most parts of the hidden API processing. The SdkKind is still used
for retrieving information from java_sdk_library[_import] modules.
Follow up changes will extend the HiddenAPIScope with more information.
Bug: 179354495
Test: m out/soong/hiddenapi/hiddenapi-flags.csv
- make sure that this change has no effect on the generated flags.
Change-Id: I97968f58535121652852b8d25217aa288afd2bfd
Bug: 158843648
Test: check if dexpreopt.config for the module defined in mk file has
DexPreoptImageLocationsOnDevice field
Change-Id: Idb2de398871ff114245393a9dd92b5a1b5c942e7
Merged-In: Idb2de398871ff114245393a9dd92b5a1b5c942e7
(cherry picked from commit e3165c8de3)
Previously, a java_sdk_library with shared_library = true would create
a variation per APEX because it depends on an sdkLibraryXml module
which generates a file containing the APEX name. However, a shared
java_sdk_library_import would create a merged APEX variation. The
inconsistent variations caused failures in sdkDepsReplaceMutator.
This change ensures that both java_sdk_library and
java_sdk_library_import create an APEX specific variation when their
shared_library property is true.
Bug: 190499958
Test: m nothing
- ran the above command after modifying the test to reproduce the
problem and then after fixing to verify that it fixed the problem.
Change-Id: Iee81776a8569db3e871c40cbde14d248dfeb56e4
Previously, a java_sdk_library with shared_library = true would create
a variation per APEX because it depends on an sdkLibraryXml module
which generates a file containing the APEX name. However, a shared
java_sdk_library_import would create a merged APEX variation. The
inconsistent variations caused failures in sdkDepsReplaceMutator.
This change ensures that both java_sdk_library and
java_sdk_library_import create an APEX specific variation when their
shared_library property is true.
Bug: 190499958
Test: m nothing
- ran the above command after modifying the test to reproduce the
problem and then after fixing to verify that it fixed the problem.
Change-Id: Iee81776a8569db3e871c40cbde14d248dfeb56e4
Previously, an sdk snapshot could contain the following:
* A java_sdk_library_import module, e.g. "foo" which creates component
modules "foo.stubs", etc.
* A corresponding versioned module, e.g. "sdk_foo@current" which
created component modules "sdk_foo@current.stubs", etc.
* An internal (to the sdk snapshot) java_import for one of "foo"'s
components, e.g. "sdk_foo.stubs"
* A corresponding versioned module, e.g. "sdk_foo.stubs@current".
That causes a few problems:
1. The "foo.stubs" is duplicated.
2. The names of the components created by the versioned
java_sdk_library_import are invalid, as they append the component's
suffix to the version and not the name before the version.
The latter causes problems when building against prebuilts and fixing
that causes the generated snapshot to be invalid because it contains
duplicate definitions of the "sdk_foo.stubs@current" module. One
explicitly in the Android.bp file and one created by the
"sdk_foo@current" module.
Removing the duplicates from the snapshot causes errors as the name
generated by the snapshot for the component module, i.e.
"sdk_foo.stubs@current" does not match the name generated by the
"sdk_foo@current", i.e. "sdk_foo@current.stubs".
This change fixes them together.
Bug: 179354495
Test: m nothing
Merged-In: I515f235fe21755b5275af12366e96c24c94c0273
Change-Id: I515f235fe21755b5275af12366e96c24c94c0273
(cherry picked from commit a1aa7387f7)
Previously, an sdk snapshot could contain the following:
* A java_sdk_library_import module, e.g. "foo" which creates component
modules "foo.stubs", etc.
* A corresponding versioned module, e.g. "sdk_foo@current" which
created component modules "sdk_foo@current.stubs", etc.
* An internal (to the sdk snapshot) java_import for one of "foo"'s
components, e.g. "sdk_foo.stubs"
* A corresponding versioned module, e.g. "sdk_foo.stubs@current".
That causes a few problems:
1. The "foo.stubs" is duplicated.
2. The names of the components created by the versioned
java_sdk_library_import are invalid, as they append the component's
suffix to the version and not the name before the version.
The latter causes problems when building against prebuilts and fixing
that causes the generated snapshot to be invalid because it contains
duplicate definitions of the "sdk_foo.stubs@current" module. One
explicitly in the Android.bp file and one created by the
"sdk_foo@current" module.
Removing the duplicates from the snapshot causes errors as the name
generated by the snapshot for the component module, i.e.
"sdk_foo.stubs@current" does not match the name generated by the
"sdk_foo@current", i.e. "sdk_foo@current.stubs".
This change fixes them together.
Bug: 179354495
Test: m nothing
Change-Id: I515f235fe21755b5275af12366e96c24c94c0273
The commonSdkLibraryAndImportModule defines the methods that a module
which embeds the commonToSdkLibraryAndImport struct need to provide.
Bug: 179354495
Test: m nothing
Merged-In: I7a469ae03ea5c19922200284da08a9ae38a46751
Change-Id: I7a469ae03ea5c19922200284da08a9ae38a46751
(cherry picked from commit 71b33cca9d)
Adds support for printing a PropertySet that has a property whose value
is an array of structs.
Bug: 179354495
Test: m nothing
m conscrypt-module-sdk
- check generated Android.bp file
Change-Id: I71be04188465610bcbea4d3c9a5e8204171a1eeb
Bug: 158843648
Test: check if dexpreopt.config for the module defined in mk file has
DexPreoptImageLocationsOnDevice field
Change-Id: Idb2de398871ff114245393a9dd92b5a1b5c942e7
The commonSdkLibraryAndImportModule defines the methods that a module
which embeds the commonToSdkLibraryAndImport struct need to provide.
Bug: 179354495
Test: m nothing
Change-Id: I7a469ae03ea5c19922200284da08a9ae38a46751
Added test demonstrates the error case. The bug was that java modules'
ShouldSupportSdkVersion() converts min_sdk_version into effective
version before comparison, which discards "preview" version into
"future" version. That caused a weird case like rejecting with error
"should support "S"" even when it is set to "S".
Bug: n/a
Test: m nothing
Change-Id: Ieb53f0097b2969a8535778b1286dbfa0d4895ad4
Any apex classpath fragment that doesn't generate its own classpaths
proto, must still propagate it's boot jars for the platform classpath
fragment to include for complete CLASSPATH variables on device.
Bug: 191127295
Test: atest CtsClasspathsTestCases derive_classpath_test
Change-Id: I93687f69006741fcd66eb6e04891a4b4bbcc3b47
Prebuilt modules do not provide classesJars containing annotations.
Previously, the monolithic hidden API processing just used classesJars
from all the modules that provided them so when building against
prebuilts would have fewer classesJars than when building against
sources and so would produce different hidden API flags.
This change will generate the monolithic files from both classesJars
and files previously generated from hidden API processing. A fragment
that has performed hidden API processing will contribute its generated
files whereas standalone libraries and fragments which have not
performed hidden API processing will contribute classesJars.
Bug: 177892522
Test: m out/soong/hiddenapi/hiddenapi-flags.csv
m SOONG_CONFIG_art_module_source_build=false out/soong/hiddenapi/hiddenapi-flags.csv
- verify that the files are identical whether built from
source or prebuilts.
Merged-In: I06f3c7df49626bec21a452bc9abf1bb9e7545e5c
Change-Id: I06f3c7df49626bec21a452bc9abf1bb9e7545e5c
(cherry picked from commit d061d40eb6)
Adds a message parameter and allows leading spaces in the expected file
string to allow them to be nicely indented.
Bug: 177892522
Test: m nothing
Merged-In: I33df26610738c48879fa0b8250dc377dd04bb07d
Change-Id: I33df26610738c48879fa0b8250dc377dd04bb07d
(cherry picked from commit 51d7da2c4e)
Use classpath elements in newMonolithicHiddenAPIInfo. That means the
method can collate information from both fragments and libraries rather
than just fragments. So, this change moves the collation of the
classesJars into the method.
Bug: 177892522
Test: m out/soong/hiddenapi/hiddenapi-flags.csv out/soong/hiddenapi/hiddenapi-index.csv
- make sure that this change does not affect the contents.
Merged-In: I7c2a229fab60d02bd211438735a8d7303ed83386
Change-Id: I7c2a229fab60d02bd211438735a8d7303ed83386
(cherry picked from commit 89f570ac44)
Some build configurations do not configure boot jars. In those cases
the boot jars package check fails so should be skipped.
Bug: 177892522
Test: m nothing
lunch fvp_mini && m
Change-Id: I5498a8f5cdfb2fabf5223e94dfcee0e853059d01
Uses the apex relative path to the file as the identifier that is used
to obtain the path to the corresponding file extracted from the apex.
That is instead of a special constructed string id.
Bug: 177892522
Test: m nothing
Merged-In: I5dc77c8fb272bac289b8891d1eac801e541af1f5
Change-Id: I5dc77c8fb272bac289b8891d1eac801e541af1f5
(cherry picked from commit b4bbf2ca10)
Removes the special case in createDeapexerModuleIfNeeded for handling
java libraries and just get the Import and SdkLibraryImport module
types to implement RequiredFilesFromPrebuiltApex instead.
Bug: 177892522
Test: m nothing
Merged-In: I5cc341b5b4168b8eb196f72273a00d498de6856f
Change-Id: I5cc341b5b4168b8eb196f72273a00d498de6856f
(cherry picked from commit fef5500a76)
Prebuilt modules do not provide classesJars containing annotations.
Previously, the monolithic hidden API processing just used classesJars
from all the modules that provided them so when building against
prebuilts would have fewer classesJars than when building against
sources and so would produce different hidden API flags.
This change will generate the monolithic files from both classesJars
and files previously generated from hidden API processing. A fragment
that has performed hidden API processing will contribute its generated
files whereas standalone libraries and fragments which have not
performed hidden API processing will contribute classesJars.
Bug: 177892522
Test: m out/soong/hiddenapi/hiddenapi-flags.csv
m SOONG_CONFIG_art_module_source_build=false out/soong/hiddenapi/hiddenapi-flags.csv
- verify that the files are identical whether built from
source or prebuilts.
Change-Id: I06f3c7df49626bec21a452bc9abf1bb9e7545e5c
Adds a message parameter and allows leading spaces in the expected file
string to allow them to be nicely indented.
Bug: 177892522
Test: m nothing
Change-Id: I33df26610738c48879fa0b8250dc377dd04bb07d
Use classpath elements in newMonolithicHiddenAPIInfo. That means the
method can collate information from both fragments and libraries rather
than just fragments. So, this change moves the collation of the
classesJars into the method.
Bug: 177892522
Test: m out/soong/hiddenapi/hiddenapi-flags.csv out/soong/hiddenapi/hiddenapi-index.csv
- make sure that this change does not affect the contents.
Change-Id: I7c2a229fab60d02bd211438735a8d7303ed83386
The configuration of the bootclasspath, e.g. PRODUCT_BOOT_JARS,
includes libraries that are standalone and libraries that are part of
an APEX. All libraries that are part of an APEX must also be part of a
bootclasspath_fragment. Currently, the libraries and fragments are
handled separately but that is limiting as it does not make it easy to
process all the libraries while treating those from fragments
differently to standalone libraries. That is needed for hidden API
processing as it needs to use classesJars from standalone libraries
but pre-generated flag files from fragments.
This change adds support for ClasspathElements which is represents the
classpath as a whole while differentiating between standalone libraries
and fragments.
Bug: 177892522
Test: m nothing
Merged-In: I7a4adc67164a46079eb8ec0a17fc755044b4949d
Change-Id: I7a4adc67164a46079eb8ec0a17fc755044b4949d
(cherry picked from commit e245b61aa2)
Some modules use -XepDisableAllChecks to disable errorprone.
However, this still causes them to be compiled twice when
RUN_ERROR_PRONE is true. Allow the new enabled property to
be set to false to disable errorprone entirely, so that those
modules are only compiled once.
Bug: 190944875
Test: New unit tests
Change-Id: Ie68695db762fffcaf11bbbcb0509c4fcab73f5c5
Previously, the prebuilt art-bootclasspath-fragment did not provide any
boot image files. That meant it was impossible to build any module that
requires access to those files from prebuilts, e.g. any module that
needs to be dexpreopt-ed.
This change enables that module to retrieve those files from the
prebuilt_apex.
Bug: 177892522
Bug: 189298093
Test: m nothing
m droid SOONG_CONFIG_art_module_source_build=false SKIP_BOOT_JARS_CHECK=true
- the previous command does not work but this change does fix one
of the issues reported.
Merged-In: I1d4d9545172d79282918130df6b9aa55471bffc1
Change-Id: I1d4d9545172d79282918130df6b9aa55471bffc1
(cherry picked from commit 5466a3699c)
Previously, the boot dex jars were only copied to the predefined
locations used by the build from the source art-bootclasspath-fragment
if it was preferred, otherwise no files were copied. That caused build
failures when attempting to build with ART prebuilts. This change
copies the files from prebuilts too.
Bug: 177892522
Bug: 189298093
Test: m nothing
m droid SOONG_CONFIG_art_module_source_build=false SKIP_BOOT_JARS_CHECK=true
- the previous command does not work but this change does fix one
of the issues reported.
Merged-In: I35b37355170546daf6ecac2134d1ca9a73d0e3bc
Change-Id: I35b37355170546daf6ecac2134d1ca9a73d0e3bc
(cherry picked from commit ce918b0278)
This replicates the previous behavior when the boot jars package check
was performed by a singleton. When the singleton was removed and the
check was performed by the platform-bootclasspath the logic to exclude
jacocoagent from the list was lost. This change replaces it.
Bug: 191377804
Test: m EMMA_INSTRUMENT=true EMMA_INSTRUMENT_FRAMEWORK=true check-boot-jars
- fails without this change passes with this change.
Merged-In: If9eae254045bef9a0c0963213721fc12a9f463cb
Change-Id: If9eae254045bef9a0c0963213721fc12a9f463cb
(cherry picked from commit 7f8721618c)
Bug: 177892522
Bug: 189298093
Test: m check-boot-jars
m SOONG_CONFIG_art_module_source_build=false check-boot-jars
- Ran both commands with and without java.lang in the
package_allowed_list.txt
Merged-In: Iba1a881c8f6b6919d5c0c0520eb3073658f3b8d2
Change-Id: Iba1a881c8f6b6919d5c0c0520eb3073658f3b8d2
(cherry picked from commit c8ead41ba9)
Removes some unnecessary logic left over from previous changes.
Bug: 177892522
Test: m nothing
Merged-In: Id11e2ea8a647283af1b152b33757132e44dcd6c3
Change-Id: Id11e2ea8a647283af1b152b33757132e44dcd6c3
(cherry picked from commit 58e7586b3d)
Previously, the rules to perform hidden API encoding were generated
separately to the rules to perform hidden API flag generation. This
change combines them within the (renamed) produceHiddenAPIOutput()
method and makes the paths to the encoded dex files an output of the
generateHiddenAPIBuildActions method alongside the paths to the
generated flag files.
As encoded dex jars are now an output of the produceHiddenAPIOutput()
method which is implemented for both prebuilts and source
bootclasspath_fragment modules that necessitated the prebuilt also
providing paths to encoded dex files. That in turn required updates to
some of the tests to provide dex files from prebuilt_apex modules.
Similarly, as the produceHiddenAPIOutput() method may not be called
for some bootclasspath_fragment modules as they do not yet provide all
the information needed to perform hidden API encoding then it is
necessary to extract the encoded dex files produced by the modules
themselves. That also required a few changes to tests that did not
previously provide dex files.
Bug: 177892522
Test: m com.android.art
- check that this change does not change the contents of the apex
file, i.e. is byte-for-byte identical.
Merged-In: I60996a34d06ed1c87ed244ab3509621999ad86ec
Change-Id: I60996a34d06ed1c87ed244ab3509621999ad86ec
(cherry picked from commit e521881bd4)
The configuration of the bootclasspath, e.g. PRODUCT_BOOT_JARS,
includes libraries that are standalone and libraries that are part of
an APEX. All libraries that are part of an APEX must also be part of a
bootclasspath_fragment. Currently, the libraries and fragments are
handled separately but that is limiting as it does not make it easy to
process all the libraries while treating those from fragments
differently to standalone libraries. That is needed for hidden API
processing as it needs to use classesJars from standalone libraries
but pre-generated flag files from fragments.
This change adds support for ClasspathElements which is represents the
classpath as a whole while differentiating between standalone libraries
and fragments.
Bug: 177892522
Test: m nothing
Change-Id: I7a4adc67164a46079eb8ec0a17fc755044b4949d
Previously, the prebuilt art-bootclasspath-fragment did not provide any
boot image files. That meant it was impossible to build any module that
requires access to those files from prebuilts, e.g. any module that
needs to be dexpreopt-ed.
This change enables that module to retrieve those files from the
prebuilt_apex.
Bug: 177892522
Bug: 189298093
Test: m nothing
m droid SOONG_CONFIG_art_module_source_build=false SKIP_BOOT_JARS_CHECK=true
- the previous command does not work but this change does fix one
of the issues reported.
Change-Id: I1d4d9545172d79282918130df6b9aa55471bffc1
Previously, the boot dex jars were only copied to the predefined
locations used by the build from the source art-bootclasspath-fragment
if it was preferred, otherwise no files were copied. That caused build
failures when attempting to build with ART prebuilts. This change
copies the files from prebuilts too.
Bug: 177892522
Bug: 189298093
Test: m nothing
m droid SOONG_CONFIG_art_module_source_build=false SKIP_BOOT_JARS_CHECK=true
- the previous command does not work but this change does fix one
of the issues reported.
Change-Id: I35b37355170546daf6ecac2134d1ca9a73d0e3bc
This replicates the previous behavior when the boot jars package check
was performed by a singleton. When the singleton was removed and the
check was performed by the platform-bootclasspath the logic to exclude
jacocoagent from the list was lost. This change replaces it.
Bug: 191377804
Test: m EMMA_INSTRUMENT=true EMMA_INSTRUMENT_FRAMEWORK=true check-boot-jars
- fails without this change passes with this change.
Change-Id: If9eae254045bef9a0c0963213721fc12a9f463cb
Uses the apex relative path to the file as the identifier that is used
to obtain the path to the corresponding file extracted from the apex.
That is instead of a special constructed string id.
Bug: 177892522
Test: m nothing
Change-Id: I5dc77c8fb272bac289b8891d1eac801e541af1f5
Removes the special case in createDeapexerModuleIfNeeded for handling
java libraries and just get the Import and SdkLibraryImport module
types to implement RequiredFilesFromPrebuiltApex instead.
Bug: 177892522
Test: m nothing
Change-Id: I5cc341b5b4168b8eb196f72273a00d498de6856f
This must always be true for updatable apexes, but is not necessary
for non-updatable apexes like com.android.i18n.
In a follow up this will be used to figure out whether apex boot jars
should be bundled into platform_bootclasspath.
Bug: 191127295
Test: atest CtsClasspathsTestCases derive_classpath_test
Change-Id: Ib7dc5b057cb24955222fb97f3ff9da079f30ed77
Bug: 177892522
Bug: 189298093
Test: m check-boot-jars
m SOONG_CONFIG_art_module_source_build=false check-boot-jars
- Ran both commands with and without java.lang in the
package_allowed_list.txt
Change-Id: Iba1a881c8f6b6919d5c0c0520eb3073658f3b8d2
Previously, the rules to perform hidden API encoding were generated
separately to the rules to perform hidden API flag generation. This
change combines them within the (renamed) produceHiddenAPIOutput()
method and makes the paths to the encoded dex files an output of the
generateHiddenAPIBuildActions method alongside the paths to the
generated flag files.
As encoded dex jars are now an output of the produceHiddenAPIOutput()
method which is implemented for both prebuilts and source
bootclasspath_fragment modules that necessitated the prebuilt also
providing paths to encoded dex files. That in turn required updates to
some of the tests to provide dex files from prebuilt_apex modules.
Similarly, as the produceHiddenAPIOutput() method may not be called
for some bootclasspath_fragment modules as they do not yet provide all
the information needed to perform hidden API encoding then it is
necessary to extract the encoded dex files produced by the modules
themselves. That also required a few changes to tests that did not
previously provide dex files.
Bug: 177892522
Test: m com.android.art
- check that this change does not change the contents of the apex
file, i.e. is byte-for-byte identical.
Change-Id: I60996a34d06ed1c87ed244ab3509621999ad86ec
Previously, an []android.Module was converted to an []hiddenAPIModule
that was then used to retrieve boot dex jars. That was ok when
obtaining the dex jar files from source modules for
bootclasspath_fragment but does not work well for other use cases as
it would require doing that conversion in multiple places.
This change pushes the use of hiddenAPIModule down to the methods that
retrieve information from it which makes the methods more flexible and
easier to reuse.
Bug: 177892522
Test: m nothing
Change-Id: Ib84aaf03d8f5a63b48232036fe4589646fc23352
Merged-In: Ib84aaf03d8f5a63b48232036fe4589646fc23352
(cherry picked from commit dd5993f6d4)
Previously, copyBootJarsToPredefinedLocations relied on all its
parameters having the same length and the same order. That made it
quite fragile as changes to one of the parameters without corresponding
changes to the other would cause failures. It also combined the
retrieval of the boot dex jars from the modules, handling of missing
boot dex jar files and the generation of the rules to copy the files.
This change separates the retrieval of boot dex jars and handling of
missing files from the copying of those files while at the same time
making the function less fragile by replacing the three ordered
parameters with two maps that shared common keys.
Bug: 179354495
Test: m nothing
Merged-In: Idbcd24a7e8af89f7895a20aeddc58502dcbaad03
Change-Id: Idbcd24a7e8af89f7895a20aeddc58502dcbaad03
(cherry picked from commit 5f148ca7cf)
Previously, when building a framework boot image variant it added an
implicit dependency onto the first file in the primary boot image
variant to ensure that the primary boot image variant files that the
dex2oat command needs have been created. That works when generating
from source as in that case all the files for a boot image variant are
created by a single command. However, it does not work for prebuilts as
each prebuilt file will be copied into the required location by
separate copy commands.
This change adds all the files that the dex2oat command uses implicitly
when building an extension boot image as implicit dependencies.
Bug: 177892522
Test: m SOONG_CONFIG_art_module_source_build=false droid
- the previous command only works in combination with a number of
other build changes.
Merged-In: I183748fd17f8f3003890675b8c6bb9fcab331443
Change-Id: I183748fd17f8f3003890675b8c6bb9fcab331443
(cherry picked from commit bff50e2b80)
This test checks that fragments which are referenced from a
platform_bootclasspath module contribute their hidden API flags to those
used by platform_bootclasspath module. Previously, it was unrealistic
because the bootclasspath_fragment does not belong in an APEX.
This change moves the test from the java package to the apex package to
allow it to be modified to make the bootclasspath_fragment part of an
apex.
Bug: 179354495
Test: m nothing
Merged-In: Icb57f2e1eaea4b14aab5f47f3af7d05ea0555816
Change-Id: Icb57f2e1eaea4b14aab5f47f3af7d05ea0555816
(cherry picked from commit ffa8375f07)
This will export some hidden api related types and fields so they can
be used from outside the java package. This is needed to allow a follow
up change to move the TestPlatformBootclasspath_Fragments from the java
to the apex package.
Bug: 179354495
Test: m nothing
Merged-In: Ib69eea9d79cc83b8e3fc29919a29f071e1ec17b5
Change-Id: Ib69eea9d79cc83b8e3fc29919a29f071e1ec17b5
(cherry picked from commit 524c82c01a)
Previously, if the --header property was not specified then merge_csv
would use a header constructed by sorting all the fields in the input
files. That required that any use of merge_csv which did not already
have headers in the required order would have to explicitly specify the
headers. That made it harder to use merge_csv as a generic tool as each
invocation needed to be aware of what headers were exported in the
output.
This change causes merge_csv to simply use the headers in the order in
which they are encountered in the input files. That removes the need to
specify the --header option when generating the index files.
Bug: 179354495
Test: m out/soong/hiddenapi/hiddenapi-index.csv out/soong/hiddenapi/hiddenapi-unsupported.csv
- make sure that they are not changed by this change.
Merged-In: I420b7d07aea85af6372cd7580a8be5e2cc82a513
Change-Id: I420b7d07aea85af6372cd7580a8be5e2cc82a513
(cherry picked from commit 84c1cdf31f)
Add apex dependencies.
Bug: 188004865
Test: 1. aidegen frameworks/base/apex/appsearch frameworks/base/apex/appsearch/testing frameworks/base/services/tests/servicestests frameworks/base/core/tests/coretests cts/tests/appsearch external/icing vendor/google_testing/integration/tests/scenarios
2. The dependency graph shows it is workable to provide the result to let IDE's [Project structure] to include the service-appsearch as source directory.
Change-Id: Ifd1548f0a86c1c73f8279e8ecea67756aeb1281e
Currently, errorprone is only run if the RUN_ERROR_PRONE
enviornment variable is true. Add a flag that individual
modules can use to always enable errorprone.
In a followup cl, I plan to add another flag that will
force all errorprone checks to be errors, so that modules
can be confident that they're not ignoring any errorprone
checks.
Bug: 190944875
Test: New unit test and manually
Change-Id: Iab0c81642ed22a736add054147829e91a891d179
Previously, an []android.Module was converted to an []hiddenAPIModule
that was then used to retrieve boot dex jars. That was ok when
obtaining the dex jar files from source modules for
bootclasspath_fragment but does not work well for other use cases as
it would require doing that conversion in multiple places.
This change pushes the use of hiddenAPIModule down to the methods that
retrieve information from it which makes the methods more flexible and
easier to reuse.
Bug: 177892522
Test: m nothing
Change-Id: Ib84aaf03d8f5a63b48232036fe4589646fc23352
Always propagate LANG, LC_MESSAGES and PYTHONDONTWRITEBYTECODE
to RBE to get more consistent behavior between local actions and
RBE.
Bug: 182415460
Bug: 190593001
Test: treehugger
Change-Id: I726e6f02fd3ef77e158baf6fde77ffb7247a1375
Merged-In: I726e6f02fd3ef77e158baf6fde77ffb7247a1375
Previously, copyBootJarsToPredefinedLocations relied on all its
parameters having the same length and the same order. That made it
quite fragile as changes to one of the parameters without corresponding
changes to the other would cause failures. It also combined the
retrieval of the boot dex jars from the modules, handling of missing
boot dex jar files and the generation of the rules to copy the files.
This change separates the retrieval of boot dex jars and handling of
missing files from the copying of those files while at the same time
making the function less fragile by replacing the three ordered
parameters with two maps that shared common keys.
Bug: 179354495
Test: m nothing
Change-Id: Idbcd24a7e8af89f7895a20aeddc58502dcbaad03
Previously, when building a framework boot image variant it added an
implicit dependency onto the first file in the primary boot image
variant to ensure that the primary boot image variant files that the
dex2oat command needs have been created. That works when generating
from source as in that case all the files for a boot image variant are
created by a single command. However, it does not work for prebuilts as
each prebuilt file will be copied into the required location by
separate copy commands.
This change adds all the files that the dex2oat command uses implicitly
when building an extension boot image as implicit dependencies.
Bug: 177892522
Test: m SOONG_CONFIG_art_module_source_build=false droid
- the previous command only works in combination with a number of
other build changes.
Change-Id: I183748fd17f8f3003890675b8c6bb9fcab331443
This test checks that fragments which are referenced from a
platform_bootclasspath module contribute their hidden API flags to those
used by platform_bootclasspath module. Previously, it was unrealistic
because the bootclasspath_fragment does not belong in an APEX.
This change moves the test from the java package to the apex package to
allow it to be modified to make the bootclasspath_fragment part of an
apex.
Bug: 179354495
Test: m nothing
Change-Id: Icb57f2e1eaea4b14aab5f47f3af7d05ea0555816
