We will need the profile when we generate the primary boot image on
device.
Bug: 203492478
Test: Run `banchan com.android.art x86_64 && m` and see
`$ANDROID_PRODUCT_OUT/apex/com.android.art/etc/boot-image.prof`.
Test: Run `lunch aosp_cf_x86_64_phone-userdebug && m` and see both
`$ANDROID_PRODUCT_OUT/apex/com.android.art/etc/boot-image.prof` and
`$ANDROID_PRODUCT_OUT/system/etc/boot-image.prof`, in different
sizes.
Test: Start Cuttlefish with the built image and see both
`/apex/com.android.art/etc/boot-image.prof` and
`/system/etc/boot-image.prof` on device.
Change-Id: Id879dc49b234133dfbb9563814328661a1f4a6c0
Vendor APEXes do not formally support updates outside of the main OTA
process. We should clarify this at build time.
Test: set vendor apex to updatable, observe failure
Test: apex_test.go
Change-Id: Ife8d242a42415ebf00d7dced72c07cda1fde1839
Previously, could not set an empty string as a value of an attribute;
however, this is necessary in some cases. To not unnecessarily create an
empty string, use string pointers for attributes rather than strings.
Test: go test bp2build tests
Change-Id: I03b3a3567452d455246d22d81f86c317d06b7c39
This CL updates platform_systemserverclasspath,
systemserverclasspath_fragment, and
prebuilt_systemserverclasspath_fragment to write entries for
STANDALONE_SYSTEMSERVER_JARS to systemserverclasspath.pb. A new property
`standalone_contents` is aded to `systemserverclasspath_fragment` and
`prebuilt_systemserverclasspath_fragment` to list the standalone system
server jars in the APEX, and entries will be written to
systemserverclasspath.pb accordingly at build time.
To add more context, these entries will be consumed by derive_classpath
in order to generate an environment variable
PRODUCT_STANDALONE_SYSTEM_SERVER_JARS. The environment variable will
then be comsumed by odrefresh to determine what jars to preopt on early
boot.
Note that the variable should not end with "CLASSPATH" because the list
is not used by runtime as a classpath. It is just a colon-separated list
of jars. System server loads the jars separately with paths hardcoded in
the code.
Bug: 203198541
Test: manual -
1. Add some jars to PRODUCT_STANDALONE_SYSTEM_SERVER_JARS
2. Add some other jars to PRODUCT_APEX_STANDALONE_SYSTEM_SERVER_JARS
and standalone_contents.
3. Build an image.
4. Flash the image to a device.
5. adb shell echo \$STANDALONE_SYSTEMSERVER_JARS
6. See the correct list of jars.
Change-Id: I09a6fd1d3db85c194330da9b751702a9bf069e26
The sh_binary module is not supported the vendor variant. So, even if
there is "vendor: true" in sh_binary module, the image variant is
"image:" instead of "image:vendor.Tiramisu".
But the vendor APEX has vendor variant, so vendor APEX module and
sh_binary module have different variants and the sh_binary cannot be
added to vendor apex.
So the Sh_binaries property is added, and the image variant is removed
at DepsMutator.
Bug: 205065320
Test: make -j40 && sh_binary is added to vendor APEX && install check
Change-Id: I30e2d96a73b45e7b06eff24550542cb010008c41
Perform consistency checks as per http://go/updatable-shared-libraries
These include:
* no attribute can specified can be less than T
* max-device-sdk can't be less than min-device-sdk
* min and max-device-sdk need to be at least the module's
min_sdk_version
* using on-bootclasspath-before implies that the module's
min_sdk_version is at least T or the library has min-device-sdk of at
least T
Test: m nothing
Bug: 191978330
Change-Id: Iaca5cf23fb0bc7e65effb3529c8e829560894c2e
Merged-In: Iaca5cf23fb0bc7e65effb3529c8e829560894c2e
(cherry picked from commit f9e584dd20)
We are expanding PackageManager's supported attributes and this change
enables the developer to define them in the .bp file.
Test: m nothing
Bug: 191978330
Change-Id: I01d579190fb585662086a7fc456f3b33cb89fb57
Merged-In: I01d579190fb585662086a7fc456f3b33cb89fb57
(cherry picked from commit 826863c8e0)
As libsync is NDK/LLNDK, it doesn't need to be aded to allowlist as
apex_available.
Bug: n/a
Test: m
Change-Id: I16cfb258a24bde4def428f1e6277f5d3c95c228c
Move apex module installation rules into Soong by overriding
InstallBypassMake.
Soong installs don't support post install commands, so move the
symlinks into separate rules and add dependencies on them.
This relands If65d283abc86f18ad266da0bf16fe95971a0bf9c with fixes
to install files into $OUT/apex and I606286e971b55d9d1fc4dcd0fbd476962de5fa79
with a fix for reversed logic.
Bug: 204136549
Test: m checkbuild
Change-Id: Ie65c53ebc7911efacdb8e11ba49059448f03c658
Extract and install the primary apk normally, and then unzip the rest
of them as a post install command.
Bug: 204136549
Test: app_set_test.go
Change-Id: I17437ff27f49df6bc91bdbbea6173b46c7d3ec4e
Revert submission 1869814-vapex-multi-config
Bug: 206551398
Reason for revert: DroidMonitor-triggered revert due to breakage https://android-build.googleplex.com/builds/tests/view?invocationId=I55600009996329947&testResultId=TR93527797572038984, bug b/206551398
Reverted Changes:
I0cd9d748d:Adds multi_install_skip_symbol_files field (defaul...
I5912a18e3:Demonstrate multi-installed APEXes.
I0e6881e3a:Load persist props before starting apexd.
I932442ade:Adds a new prop context for choosing between multi...
I754ecc3f7:Allow users to choose between multi-installed vend...
Change-Id: If09bf590e3ad93e14fbf89299f80d497c9604a78
Add scripts to generate java APIs used by Mainline modules. This is
aosp/1879177 with fixed build error that caused by dexdeps analyzing
resource only APKs which doesn't contains any .dex files. Now skip the
error generates in that case in gen_java_usedby_apex.sh
Forrest run:https://android-build.googleplex.com/builds/abtd/run/L38900000951898586
Test: TARGET_BUILD_APPS=com.android.adbd m dist apps_only
Change-Id: Id539cbe1b7306ace69c047f95ffc02265a467511
Multi-installed APEXes share the same apex_name and are installed
at the same time.
Should be set to true for all multi-installed APEXes except the singular
default version within the multi-installed group.
Only the default version can install symbol files in $(PRODUCT_OUT}/apex,
or else conflicting build rules may be created.
Bug: 199290365
Test: see https://r.android.com/1872018
Change-Id: I0cd9d748d7be3a2de40ed14f13bad71912457ddc
Move apex module installation rules into Soong by overriding
InstallBypassMake.
Soong installs don't support post install commands, so move the
symlinks into separate rules and add dependencies on them.
Bug: 204136549
Test: m checkbuild
Change-Id: If65d283abc86f18ad266da0bf16fe95971a0bf9c
* changes:
Rename amod variable in AndroidMkEntries.fillInEntries to base
Make HostToolPath, HostJNIToolPath and sboxPathForToolRel use pathForInstall
Add PathForGoBinary
Remove PathForOutput from InstallPathToOnDevicePath
Use pathForInstall instead of PathForOutput for HostToolPath,
HostJNIToolPath and sboxPathForToolRel so that they internally produce
an InstallPath that can later support being converted to Make install
path.
Bug: 204136549
Test: m checkbuild
Change-Id: Ie16a62641d113873daeec4d1dd4261251bc0d0eb
Add PathForGoBinary that uses pathForInstall to return the install
path of a GoBinaryTool. This will replace various places that used
PathForOutput to reconstruct a path to a Go tool, and will support
moving Go tools to the Make install directory outside of the
PathForOutput directory in a future patch.
Bug: 204136549
Test: m checkbuild
Change-Id: I83a3be9f5c621975540f5ed601a0b9e2611c98b9
This CL fixes a bug that `required` property of apex modules is not
reflected to the generated Android.mk file.
Bug: N/A
Test: m nothing
Change-Id: I36ccf538882f083f9433bd3eb05b3a5127f3822b
A new property indicates a CLI tool to sign the APEX contents. The value
is stored in apexkeys.txt so that releasetool (sign_target_files_apks)
can use it to invoke the tool to re-sign the apex contents.
Bug: 193504286
Test: m out/soong/apexkeys.txt
com.android.virt.apex line has sign_tool value
Change-Id: Ifd472049b75b5b87c1ed320f5e1190ff65ed54f2
Since coverage support was added to bootclasspath_fragment in
https://r.android.com/1684807 and bootclasspath_fragments were
integrated into the ART APEX it is no longer necessary to treat ART
APEXes differently to other APEXes.
Change https://r.android.com/1684807 added coverage support, follow
up changes integrated
Bug: 177892522
Test: m droid
m EMMA_INSTRUMENT=true EMMA_INSTRUMENT_FRAMEWORK=true
Change-Id: I4800a003c7459c4686607e16f4c5bde0be105f16
This WalkDeps loop was expecting the dependencies to be fully filled
out, which isn't necessarily true on AllowMissingDependencies builds,
especially on Mac when the modules may exist, but not be enabled.
This was triggered when make_erofs was added to an apex, but wasn't
enabled on Mac.
It shouldn't be a problem to skip the disabled dependencies, since we'll
have already marked the current module as missing dependencies, which
means it won't actually get built.
Test: `m nothing` on a mac
Change-Id: Icd6d597117be4cde5bff041be3fd47361c54cad9
This CL adds more tests to ensure that dexpreopted files are generated
and APEXes depends on them.
Bug: 201371822
Test: m nothing
Change-Id: I407ad54c55cbca9ef78bbd335e95d4b765e174a0
A prebuilt_apex/apex_set module can make a dex implementation jar
available for use by Make targets but it does not have access to a real
classes implementation jar; the jar in the corresponding sdk is just an
empty file. Exporting that invalid file to Make means that the phony
target created for the module depends on an invalid classes jar which
causes the build to fail.
This change removes the logic that make classes and header jars
available to Make so that building the phony target no longer fails.
Bug: 202521005
Test: m TARGET_PRODUCT=armv8 TARGET_PRODUCT_VARIANT=eng TARGET_BUILD_UNBUNDLED=true SOONG_ALLOW_MISSING_DEPENDENCIES=true core-icu4j
- above was performed in master-art.
Change-Id: If667b36b988e2d331acd85f60f3369778838d034
Previous change that was reverted: https://r.android.com/1835222
An additional test was added that revealed a bug in the previous change
which has been fixed here.
Previously, the behavior of the stub_flags and all_flags properties
was different between S and T. In S they contained paths for the
complete set of stub flags and all the encoded flags. However, in T
they contained filtered sets of flags which if used in S would prevent
build checks from detecting possible inconsistencies. Also, a new
signature_patterns property was added in T that is not supported in S.
This change creates separate properties/files for T and reverts the
behavior of the properties/files that were added in S back to how they
behaved in S. The new properties are called filtered_stub_flags and
filtered_flags.
The S and T properties are tagged with the appropriate
supported_build_releases tag to ensure that they are only output when
specifically targeted.
Bug: 197842263
Test: m nothing
Change-Id: I1ce0a3d6623dabf73e32af1a7457b9b444fc3b7c
Variable PRODUCT_UPDATABLE_SYSTEM_SERVER_JARS was renamed to
PRODUCT_APEX_SYSTEM_SERVER_JARS in https://r.android.com/1779472.
Bug: 191127295
Test: m nothing
Change-Id: I0c8ae839cab443c824760b40d30b4374982010f9
Introduce `commonAttributes` & `fillCommonBp2BuildModuleAttrs used in
CreateBazelTargetModule
Adapt `bp2BuildInfo` to use `commonAttrs` instead of `Name`.
And thus also all downstream users of `CreateBazelTargetModule`.
As initial user, the Soong `required` property will be
translated to Bazel's `data`.
Bug: 198146582, 196091467
Test: build_converstion_test.go:TestCommonBp2BuildModuleAttrs
Test: go test
Test: mixed_{libc,droid}.sh
Change-Id: Ib500e40f7e2cb48c459f1ebe3188962fc41ec124
Previously, the behavior of the stub_flags and all_flags properties
was different between S and T. In S they contained paths for the
complete set of stub flags and all the encoded flags. However, in T
they contained filtered sets of flags which if used in S would prevent
build checks from detecting possible inconsistencies. Also, a new
signature_patterns property was added in T that is not supported in S.
This change creates separate properties/files for T and reverts the
behavior of the properties/files that were added in S back to how they
behaved in S. The new properties are called filtered_stub_flags and
filtered_flags.
The S and T properties are tagged with the appropriate
supported_build_releases tag to ensure that they are only output when
specifically targeted.
Bug: 197842263
Test: m nothing
Change-Id: Iec8b9c539796c507245b69c0aed980fde6d8694f
* changes:
Generate prebuilt_systemserverclasspath_fragment.
Add a new SDK member type java_systemserver_libs.
Add exported_systemserverclasspath_fragments to prebuilt_apex rule.
Add prebuilt_systemserverclasspath_fragment rule.
This is for exporting the contents of systemserverclasspath_fragment for
dexpreopting.
Bug: 194150908
Test: manual - 1. Patch aosp/1818020 and aosp/1834534
2. m SOONG_CONFIG_art_module_source_build=false com.android.art
Change-Id: I7d2d2e02869d8a523f7c0efbbff81706672a95c5
This is the prebuilt side of systemserverclasspath_fragment, currently
for used for dexpreopting.
The change to automactially generate
prebuilt_systemserverclasspath_fragment rules will be in a separate CL.
Bug: 194150908
Test: m nothing
Change-Id: Ibf5322f80f78ac3ca037489f4a279456fe38a23f
Not calling InstallFile when !installable prevents the module not only
from being installed to the partition, but also from being packaged for
a packaging_base. InstallFile already has a routine for not generating
the install rule when the module is not installable. So, the check for
can be safely omitted at the call site.
Bug: 199674764
Test: m com.android.virt. the virt apex has
com.android.runtime.64only.apex in system/apex
Change-Id: I0249f5916496ed136dbf1978e04e2971852de244
It will get more logic in upcoming CLs.
Add a property to DeapexerInfo for the APEX name, for use in error
messages.
Test: m nothing
Bug: 192006406
Change-Id: I957f3df8b34543a38cde38768dac93e78132d672
invalid with a message.
This will allow propagating any error from the deapexer module for
prebuilt APEXes to the location where the dex jars get used. It's only
at those points that we can raise errors about not being able to
extract files from the deapexer modules if they are invalid, and this
way we avoid encoding knowledge there about why they may be invalid.
To keep the refactoring limited it intentionally does not change any of
the existing logic for when dexJarFiles are set or not (non-nil vs nil
prior to this change), although there may be opportunity to use this
for more conditions when dex jars aren't available.
The refactoring is also not extended to
dexpreopt.ClassLoaderContextMap.
Test: m nothing
Bug: 192006406
Change-Id: I68986dccd9a9b3fee4d24caa1947ea17a36caedc
Adds a test case to TestJavaStableSdkVersion for the case where a
module uses sdk_version: "core_platform" but is in the list of modules
that can use the legacy version.
This required storing the lookup map in the Config to allow it to be
customized for the test.
Bug: 180399951
Test: m nothing
Change-Id: I404705c3fd8a559649c6ab2624856cf78f49f85c
This reverts commit 92346c4832.
Reason for revert: Fixed build error.
The build error is fixed by ag/15841934. This CL remains unchanged. This
CL will be submitted AFTER ag/15841934 is submitted.
Bug: 200024131
Test: 1. Patch this CL and ag/15841934 into internal master.
2. sudo vendor/google/build/build_test.bash
Change-Id: I5f2b8357846fc7dda56e25ebe6ffb095e8047ec8
* In builder.go, share common flags in a module.
* This replaces the sharing of cflags/cppflags/asflags in cc.go.
* A unit test in apex_test.go now fails and is commented out.
It is a failing test hidden by old optimization in cc.go.
* In module.go, expand the reference variable $someflags<n>,
or ${someflags<n>} to keep many existing unit tests work as is.
* The build.ninja size was reduced from 8.1GB to 6.2GB,
for aosp_arm64-eng WITH_TIDY=1 USE_RBE=true,
and from 7.5GB to 5.6GB when USE_RBE is 0.
Content of build.ninja is also more readable and searchable.
Read/write build.ninja times are also reduced,
depending on disk I/O speed.
Test: make WITH_TIDY=1
Change-Id: I17f96adf4844136d52e5d40f57a19d9e290162b7
The path to the artifacts will in the form of
/system/framework/oat/<arch>/<encoded-jar-path>@classes.{odex,vdex,art},
where <encoded-jar-path> is the path to the jar file with "/" replaced
by "@". For example,
/system/framework/oat/x86_64/apex@com.android.art@javalib@service-art.jar@classes.odex
There will be a follow-up CL to update ART runtime to recognize
artifacts in that path.
Test: m com.android.art
Bug: 194150908
Change-Id: Ic89fd63c4b1cd565684cead83fc91dae3bc97a4c
Similar to the previous CL, but for jars from prebuilts.
Test: manual - 1. Patch aosp/1818020 and aosp/1810840.
2. m SOONG_CONFIG_art_module_source_build=false com.android.art
Bug: 194150908
Change-Id: Idc0c73a78045a602ad3a91cb5071d291bd611015
Technically, tzdata apex depends on
//system/sepolicy/apex:com.android.tzdata-file_contexts. Builds suceeded
regardless due to bp2build generating a filegroup for all files in a
directory.
This also requires an update to the check in apex/builder.go to address
the fact that outputs (including filegroups) from Bazel in mixed builds
will be in a Bazel out subdirectory. This change also corrects a
potential bug that would not support all subdirectories under
system/sepolicy as golang's path.Match does not treat ** as recursive.
Test: go test apex tests
Test: build/bazel/ci/mixed_droid.sh
Change-Id: I1076d60cf271e4cdd1ea990156ab0a39fcfa6535
Compressed APEX files generated by the build system have the .capex
extension. This CL allows us using those .capex files with their actual
suffix.
Bug: 197258691
Test: manual + unit test added
Change-Id: I79173ef942326b48b5e659f1873d80f12b212339
Bug: 197787336
Test: Create an override_apex that uses a different `prebuilts` than its
base. Observe built contents.
Test: apex_test.go
Change-Id: I7666ed6cfe3f2fa5dd81e5f8c1961477dabbbd3c
These are just out/ and out/soong/ and the old names were quite
confusing.
Test: Presubmits.
Merged-In: I999ca62162062f27e449f83ffb00fa580d4065b8
Merged-In: I2fcd80a9e376a6842a06aa104a9f6f5c5e16f8c7
Change-Id: Ib481d2aac40df8da1b74174dc8ec576c1cb48be0
