In preparation for allowing the TestContext to enforce an ordering on
the registration of singletons and pre-singletons in the same way as it
does for mutators this defers the registration of them into the
underlying Context.
Bug: 181953909
Test: m nothing
Change-Id: I2d9652122bb6387b6b47ca4761e811885d15c2b6
This change uses the order in which mutators are registered at runtime
to define the order in which mutators must be registered in tests to
improve test reliability and prevent issues like bug 181974714.
Generally, it simply sorts the test mutators into the same order as
used at runtime. However, if the test includes a mutator that is not
used at runtime then it cannot sort them because it does not have
enough information to know where it should appear in that order. So,
instead it simply checks the order and makes sure that it matches.
Allowing relationships between mutators to be explicitly defined, e.g.
mutator X should come after mutator Y but before mutator A would fix
that information gap and allow them to be sorted but that is outside
the scope of this piece of work.
The code here is written generically for a sortableComponent as
follow up changes will sort singletons and pre-singletons in the same
way.
Bug: 181953909
Test: m nothing
Change-Id: Ib7d421f578e25f6dccaaff4f73b69838d1b54b00
This separates the collation of mutators from the registration of them
to allow the test infrastructure to sort the mutator order to match
that used at runtime.
Bug: 181953909
Test: m nothing
Change-Id: I01a073289d44417f327b0815c09eb1c033d464f2
In preparation for following changes that will ensure the order of
registration (and so execution) for mutators, singletons and
pre-singletons in tests match the order in runtime this change creates
the sortableComponent interface to allow those to be sorted in the same
way without having to resort to reflection.
By moving the registration code into each component type this change
also eliminates some unnecessary duplication of that code.
Bug: 181953909
Test: m nothing
Change-Id: I597b461b966c84faaeb13e7dff765f1fadd99981
A lot of existing tests that expect errors to be reported do not check
the returned result. This change treats failures of the error handler
in that situation as fatal.
The default error handler already behaved that way. The others did not.
FixtureExpectsAllErrorsToMatchAPattern uses
CheckErrorsAgainstExpectations and it was safe to just make that func
treat any unmatching errors as fatal as all the existing usages are at
the end of test functions.
FixtureExpectsAtLeastOneErrorMatchingPattern uses the
FailIfNoMatchingErrors function which is used in a number of places
(including CheckErrorsAgainstExpectations) that do not want to treat
a test failure as fatal. So, that was modified to return false if no
matching error was found and the error handler treated that as fatal.
Bug: 181070625
Test: m nothing
Change-Id: I6e4df53f93250348bc050d4ff098134e6314ae30
FixturePreparers is a bad name for a method that creates a collection
of FixturePreparers for a couple of reasons:
* Conventionally it would be used as the name for []FixturePreparer if
it is necessary to add behavior to that.
* There are many different types of collection, particularly when order
matters.
Bug: 181070625
Test: m nothing
Change-Id: I55394ff369375dcac2d7b72e4d803a4818762d36
Adds the test fixture support and converts a few tests to exercise the
code and show how it works.
Bug: 181070625
Test: m nothing
Change-Id: I0a2b40fff93b6041f9aa8c4ef0aba91da1bc8bf3
Add a ctx parameter to AndroidMkExtraEntriesFunc to allow them to
access providers.
Test: m checkbuild
Change-Id: Id6becc1e425c3c3d8519248f8c0ce80777fac7cc
Merged-In: Id6becc1e425c3c3d8519248f8c0ce80777fac7cc
This currently expands all globs, still need to support converting glob
syntax.
Test: go build_conversion_test
Test: GENERATE_BAZEL_FILES=true m nothing
Test: m nothing
Bug: 165114590
Change-Id: If7b26e8e663d17566fad9614ca87a8da1f095284
The previous implementation relied on the implicit registration of Bp2Build mutators, resulting in test non-hermeticity. Refactor bp2build tests to explicitly specify the bp2build mutators under test.
Test: Soong tests
Test: TH
Change-Id: I9b9674bad1ea533b3bd31b07077a9e02c99b4c1d
This CL creates the framework necessary for generating
BazelTargetModules from regular Soong Android modules.
BazelTargetModules are code-generated into Bazel targets in BUILD files.
See the follow-up CL for examples of creating filegroup/genrule
BazelTargetModules.
Test: GENERATE_BAZEL_FILES=true m nothing # creates out/soong/bp2build
with no BUILD files, because there are no BazelTargetModules in the
module graph.
Change-Id: I33a96365bd439043b13af6db9e439592e9983188
Dexpreopt and boot jars package check all require access to dex
implementation jars created for java_library and java_sdk_library. They
were available when building from source but not when building from
prebuilts, even though they are embedded within the .apex files that
are referenced from prebuilt_apex.
This changes adds support to prebuilt_apex to export the dex
implementation jars and updates java_import to use those exported dex
implementation jars.
In a source build dexpreopt/boot jars package check access the apex (or
platform) specific variant of a java_library, e.g. core-oj, from which
it retrieves the dex implementation jar path.
After this change in a prebuilt build dexpreopt/boot jars package check
behave in the same way except in this case they retrieve the dex
implementation jar path from the apex (or platform) specific variant of
the java_import, e.g. core-oj.
The work to export files from a `.apex` file for use by other modules
is performed by a new `deapexer` module type. It is not used directly
in an `Android.bp` file but instead is created implicitly by
`prebuilt_apex`,
In order to do that this contains the following changes:
* Adds a new `dexapexer` module type to handle the exporting of files
from the `.apex` file.
* Adds an exported_java_libs property to prebuilt_apex to specify the
set of libraries whose dex implementation jars need exporting.
* Creates apex specific variants of the libraries listed in the
exported_java_libs property.
* Adds the set of exported files to the ApexInfo to make them available
to the apex specific variants.
* Prevents the prebuilt_apex variants from being merged together as
they will not be compatible.
* Modifies java_import to use the exported file for variants of a
prebuilt_apex.
* Adds a ninja rule to unpack (using deapexer) the contents of the
prebuilt_apex's apex file, verify that the required files are present
and make them available as outputs for other rules to use.
* Some minor refactorings to support these changes.
* Adds tests to cover prebuilt only, prebuilt with source preferred,
and prebuilt preferred with source.
Test: m nothing
Bug: 171061220
Change-Id: Ic9bed81fb65b92f0d59f64c0bce168a9ed44cfac
The build has some implicit dependencies (via the boot jars
configuration) on a number of modules, e.g. core-oj, apache-xml, that
are part of the java boot class path and which are provided by mainline
modules (e.g. art, conscrypt, runtime-i18n) but which are not otherwise
used outside those mainline modules.
As they are not needed outside the mainline modules adding them to
the sdk/module-exports as either java_libs, or java_header_libs would
end up exporting more information than was strictly necessary. This
change adds the java_boot_libs property to allow those modules to be
exported as part of the sdk/module_exports without exposing any
unnecessary information.
Some points to note:
* The java_import has to have a valid file for the src property
otherwise it will be disabled.
* The src property is supposed to reference a jar file but the
java_boot_libs property will make it reference an empty file (not
an empty jar) so that any attempt to use that file as a jar, e.g.
compiling against it, will cause a build failure.
* The name of the file passed to the src property should make it
clear that the file is not intended to be used.
* The test makes sure that only the jar file is copied to the
snapshot.
Test: m nothing
Bug: 171061220
Change-Id: I175331e4c8e3874ab70a67cdc2f76ed1576e41eb
A SingletonModule is halfway between a Singleton and a Module. It has
access to visiting other modules via its GenerateSingletonBuildActions
method, but must be defined in an Android.bp file and can also be
depended on like a module.
Bug: 176904285
Test: singleton_module_test.go
Change-Id: I1b2bfdfb3927c1eabf431c53213cb7c581e33ca4
Store SingletonMakeVarsProviders in the config instead of a global
variable to avoid races between tests running in parallel.
Test: all soong tests
Change-Id: I2ab64f368b5ac673fd985399d4421ed018abc562
Prepare for using Config when adding singletons by passing
Config to NewTestContext and NewContext instead of to ctx.Register.
This will enable a followup change to store SingletonMakeVarsProviders
registered on the Context in the Config, which is necessary to run
multiple tests in parallel without data races.
Test: all soong tests
Change-Id: Id229629a4e42ff4487d317241673837726c075fc
Similarly to Output, we return the list of Rules that have been
generated for TestingModule. This helps debugging failing tests.
Test: m nothing
Change-Id: I3542f4e4632f94fb84208c2e48e629271a373fd4
APEX variants that share the same SDK version and updatability
almost always use identical command line arguments to build but
with different intermediates directories. This causes unnecessary
build time and disk space for duplicated work.
Deduplicate APEX variants that would build identically. Create
aliases from the per-APEX variations to the new shared variations
so that the APEX modules can continue to depend on them via the
APEX name as the variation.
This has one significant change in behavior. Before this change,
if an APEX had two libraries in its direct dependencies and one
of those libraries depended on the other, and the second library
had stubs, then the first library would depend on the implementation
of the second library and not the stubs. After this change, if
the first library is also present in a second APEX but the second
library is not, then the common variant shared between the two
APEXes would use the stubs, not the implementation.
In a correctly configured set of build rules this change will
be irrelevant, because if the compilation worked for the second
APEX using stubs then it will work for the common variant using
stubs. However, if an incorrect change to the build rules is
made this could lead to confusing errors, as a previously-working
common variant could suddenly stop building when a module is added
to a new APEX without its dependencies that require implementation
APIs to compile.
This change reduces the number of modules in an AOSP arm64-userdebug
build by 3% (52242 to 50586), reduces the number of variants of the
libcutils module from 74 to 53, and reduces the number of variants
of the massive libart[d] modules from 44 to 32.
This relands I0529837476a253c32b3dfb98dcccf107427c742c with a fix
to always mark permissions XML files of java_sdk_library modules as
unique per apex since they contain the APEX filename, and a fix
to UpdateUniqueApexVariationsForDeps to check ApexInfo.InApexes
instead of DepIsInSameApex to check if two modules are in the same
apex to account for a module that depends on another in a way that
doesn't normally include the dependency in the APEX (e.g. a libs
property), but the dependency is directly included in the APEX.
Bug: 164216768
Test: go test ./build/soong/apex/...
Change-Id: I2ae170601f764e5b88d0be2e0e6adc84e3a4d9cc
Only print the list of variants of the matching module when
ctx.ModuleForTesting finds the module but not the variant.
Test: all soong tests
Change-Id: I51ffdde4645db39ec1d37ec018e0dea11d74280e
Previously, while sdk tests would pass the sdk code would often fail
in androidmk processing. This change makes the tests more realistic
and will catch the errors earlier.
Bug: 142935992
Test: m nothing
Change-Id: Ifd0b2d7cf24e941c919f6b6e0beb2403a67d4308
This is for use to add dependencies between specific module variants,
without getting the dependencies potentially duplicated as more
variants are created.
Moved genrule tool dependency registration to this phase, to avoid
potential splitting of its dependencies, and for consistency with the
same kind of dependency on dex2oat in https://r.android.com/1205730.
Test: m nothing
Bug: 145934348
Change-Id: I1f9e75354e359cef5f41d14e5016b0a67d7655d7
Some pre arch mutators are hard coded into mutator.go and so could not
share code for registering those mutators between tests and runtime.
This change adds a new HardCodedPreArchMutators(RegisterMutatorFunc)
method to RegistrationContext which allows hard coded mutators to be
registered alongside other build components during init() and testing.
The method is treated as a noop on the InitRegistrationContext and
behaves just like the PreArchMutators(RegisterMutatorFunc) method on
the TestingContext.
Bug: 146540677
Test: m nothing
Change-Id: I6f8b1e2d54d9dc4e86f951ced61d1ee7b0fe4b2e
Make android.AddLoadHook wrap blueprint.AddLoadHook. Also pass
the config object to ParseBlueprintsFiles.
Test: all soong tests
Change-Id: I60c988b717d395f52498ec23ef7c9046d9861a6e
Changes prebuilt_stubs_sources to generate a .srcjar from its input
instead of just exposing the srcs it is given. This ensures that it can
be used as a drop in replacement for a droidstubs module.
Updates the test for prebuilt_stubs_sources to be more representative
of the actual use made of it by sdk snapshot which outputs a directory
not a glob pattern. Added some documentation of the
prebuilts_stubs_sources srcs property to make it clear that it is
supposed to be a set of directories.
Extracts common code from sdk/testing.go for normalizing path/paths
for testing.
Bug: 143678475
Test: m conscrypt-module-sdk conscrypt-module-host-sdk conscrypt-module-test-sdk
unzip those in place of external/conscrypt
build core-current-stubs-source which expects it to provide a .srcjar.
Change-Id: I8204a022557a9b0b45e19eac79ecba98ff95213d
The filesystem object was available through ModuleContext.Fs(), but
gives too much access to the filesystem without enforicing correct
dependencies. In order to support sandboxing the soong_build
process move the filesystem into the Config. The next change will
make it private.
Bug: 146437378
Test: all Soong tests
Change-Id: I5d3ae9108f120fd335b21efd612aefa078378813
AndroidMkEntries now returns multiple AndroidMkEntires so that a module
can emit multiple Make modules if needed.
Bug: 128708192
Test: m
Change-Id: I56b6f76d22943b80329951c5acb80a1b932441ad
Avoid having to pass ModuleFactoryAdaptor to every call to
RegisterModuleType in a test by wrapping RegisterModuleType.
Test: all soong tests
Change-Id: If8847d16487de0479cc3020b728256922b3cadba
Extracted some common code used by visibility_test.go and
neverallow_test.go into a new function CheckErrorsAgainstExpectations
in testing.go.
Bug: 138428610
Test: m nothing
Change-Id: I6996fa52968c387e38b4a67ffa59cd07c2d524e8
Merged-In: Iafbadf12c6ffdc4d9128fcfe7f15792df5cfd020
java.Module is using "Custom" function to write Android.mk.
And if "hostdex" is set to "true", it writes "hostdex" module definition
as well as original module.
As of now, Required/Host_required/Target_required props are filled in
the AndroidMkEntries structure(aosp/939505). But these are not
passed to old AndroidMkData.Custom function.
So, if a java_library declares "hostdex:true" and "required:[...]"
together, "required" is not applied to the "hostdex" variant.
This change copies *Required props from AndroidMkEntries to
AndroidMkData before calling its Custom callback.
Test: m (runs soong unit tests)
Change-Id: I5f85714f721a2a0917ab18072dbea52294c770e7
Allow missing dependency errors to be tested by capturing the
missing dependency error rule instead of the originally requested
rule.
Test: all soong tests
Change-Id: Id2b23b9ee354cdafc44fb9adfaf8fe7bab973478
The new system collects all Android.mk variable assignments using a map
and writes them to io.Writer. Compared to the previous system, which
directly writes all entries to buffers, this new system is more robust
and test-friendly.
Test: Built without prebuilt_etc.go change and diffed the mk output.
Test: prebuilt_etc_test.go
Change-Id: Idd28443d129ff70053295015e69328a8fa3eca47
Creating new modules in a mutator is dangerous, as other mutators
that need to see the new modules may already have run, in this case
the prebuilts mutator. Move SdkLibraryMutator to a LoadHook instead.
Also moves registering the LoadHook mutator to testing.go so it is
registered for all tests.
Test: m checkbuild
Change-Id: I08bd76a0e6205d2ca27861058067a1562c339eed
Allow rules built with RuleBuilder to use depfiles. Ninja only
supports a single depfile with single output. If there are
multiple outputs in a rule, move all but the first to implicit
outputs. If multiple depfiles are specified, use new support
in dep_fixer to combine additional depfiles into the first depfile.
Test: rule_builder_test.go
Change-Id: I7dd4ba7fdf9feaf89b3dd2b7abb0e79006e06018
Add a mutator pass after DepsMutator that visits every property
struct in every module looking for properties that have a tag
`android:"path"`, and automatically add a SourceDepTag dependency
on any module references (":module-name") found. Uses a cache to
store the mapping of property struct type to locations of
properties with the tag.
Test: android/path_properties_test.go
Change-Id: I38c0497843dde4890e9342c3a6f0b402c0720742
Add support for TestingModule to return RuleParams for rules created
by the module.
Refactor TestingModule to use helpers, and use the helpers to
implement a similar TestingSingleton.
Use the new functionality to test RuleBuilder's module and singleton
rules.
Test: none
Change-Id: I8348c56ff5086d0c49401f5a00faf7c864e6b6f3
Currently only java/app.go is affected by package name overrides. When
the var is used, the corresponding module's install APK name is changed
to the overriding name.
Bug: 122957760
Test: app_test.go + TreeHugger
Change-Id: Ie522da3d7280970d740d779cf2694560feae6180
Add methods to TestingModule that return an empty BuildParams instead
of panicking, which can be used to test if a module has a matching
rule. Also add godoc to the TestingModule methods.
Test: m
Change-Id: Iea2ab9be57d3f3f60437041f4e5a7e2100e1fe48
To save space, only the primary arch variant is installed to the
recovery partition. This has been done in the imageMutator by not
creating recovery variant for the non-primary arch.
However, this caused a problem for recover-only module, i.e., recovery:
true. Such module ends up creating no variant for the non-primary arch.
Since every other modules are at least in one image variant, any
dependency fro such module with no image variant can't be satisfied.
In order to solve the problem, archMutator is modified to create only
the primary arch for recovery-only modules.
Bug: 111321972
Test: m -j (TestRecovery added)
Change-Id: Ie32ae06fb094efcfd8531cdf6071139d292d93ab
Debugging when writing tests using TestModule.Outputs is
unnecessarily hard, it panics when an incorrect output path
is given but doesn't provide any help to figure out why.
Follow the pattern used by TestContext.ModuleForTests
and print the list of valid output paths on failure.
Test: m checkbuild
Change-Id: I50e8e2dfc2070bd538d47cf6495a489f727b1564
This mostly reverts commit 178d5fefc0
and mostly reapplies change I6d3e52ef62c4cabe85b9a135a54de0e1a6aab29c .
Bug: 65683273
Test: build/soong/scripts/diff_build_graphs.sh \
--products=aosp_arm \
'build/blueprint:work^ build/soong:work^' \
'build/blueprint:work build/soong:work'
# and see that the only changes were:
# 1. adding some new files
# 2. changing some line numbers
Test: m -j nothing # which runs unit tests
Change-Id: I32baae00277a547fdcdd1c2219fe6625ee0e45d7
Ignore overlay directories that have been selected for enforced RRO
by the product, and pass them to Make instead to be converted to
an auto generated RRO package.
Bug: 69917341
Test: m checkbuild
Change-Id: I8e2677f4c600acdd8dee0869bf4fbc3d5dbc8b44
This reverts commit 63a250a336.
Reason for revert: Some failures:
namespace_test.go:648: dir1/Blueprints:2:4: a namespace must be the first module in the file
such as New Build Breakage: aosp-master/build_test @ 4475274
Change-Id: I1b5db8eb934e51ff22241bfca44199d886b1393b
Bug: 65683273
Test: build/soong/scripts/diff_build_graphs.sh \
--products=aosp_arm \
'build/blueprint:work^ build/soong:work^' \
'build/blueprint:work build/soong:work'
# and see that the only changes were:
# 1. adding some new files
# 2. changing some line numbers
Test: m -j nothing # which runs unit tests
Change-Id: I6d3e52ef62c4cabe85b9a135a54de0e1a6aab29c
Now that android.ModuleContext does not include blueprint.ModuleContext
we can rename android.ModuleContext.ModuleBuild to
android.ModuleContext.Build without colliding with
blueprint.ModuleContext.Build. Leave ModuleBuild as a wrapper around
Build for now to avoid having to update all the users outside
build/soong simultaneously.
Test: m checkbuild
Change-Id: I18eb8cc04faf002049a11d9aac97e9732ff5d638
If sdk jars(android_stubs_current, etc) are compiled using soong java
modules, we have to filter them when running Java build with Turbine.
TODO: provide more unit-tests.
Test: m clean && m -j32; go test java_test
Change-Id: Iad7c241b0e8b0ca760950733f513124b56c84564
Make Rel() on ModuleOutPath and ModuleGenPath return the path
relative to the module out and module gen directories respectively,
and make TestingModule.Output() match against the full relative
path to the module.
Test: java_test.go still passes
Change-Id: Id5b2ec3fdef41d4169b943e68d032fc64a2b6f92
This uses knowledge of transitive dependencies to reorder
linker command line arguments such that if module A depends
on module B, then module A is automatically listed before
module B in the linker command line.
This should mostly remove the need for Android.bp files to
list all of their static dependencies in link order
Bug: 66260943
Test: reorder the entries of static_libs in an Android.bp and see that linking still succeeds
Change-Id: I20f851ab9f2f30031254e4f30023b6140d15d6c3
Add TestArchConfig and NewTestArchContext to create a test context
that will run the arch mutator, which is necessary to test any code
that is inside a ctx.Device() block or similar.
Test: next patch
Change-Id: Ieb1a0326bc27fc18ba88b8d37655a7e0c6870d6c
Fix mutator registration for tests to allow different tests
in the same package to register different mutators.
Allow tests to track the resulting ModuleBuildParams objects
to use in assertions, and provide helpers for getting them.
For example:
config := android.TestConfig(buildDir)
ctx := android.NewTestContext()
ctx.RegisterModuleType(...)
ctx.MockFileSystem(...)
ctx.ParseBlueprintsFile("Android.bp")
ctx.PrepareBuildActions(config)
ctx.Register()
// Get the Inputs value passed to the javac rule for the foo module
inputs := ctx.ModuleForTests("foo".Rule("javac").Inputs
Test: java_test.go
Change-Id: I10c82967f5f3586d2c176f169906b571ed82fc73
