Attempting to reduce the number of different spellings we have for
"product services" partition in the codebase.
Bug: 112431447
Test: m
Change-Id: I0a393a1d625e7ea3217d28735a4db709bce32395
Merged-In: I0a393a1d625e7ea3217d28735a4db709bce32395
Setting this will cause our invocation of ninja to fail. Even if we
fixed that, it's likely to run into other differences during the build.
Fixes: 112443729
Test: POSIXLY_CORRECT=1 m nothing
Change-Id: I0315955c9fd9536cc6cb0d7c700eed207f35cc80
lsof is used by goma to find its proxy daemon
ps is used on Mac instead of pstree in soong_ui
Test: none
Change-Id: Ifed7d09d604c00b7eebac1488a6f4658788d6e33
du is used by build/make/tools/releasetools/build_image.py
paste is used by system/core/rootdir/update_and_install_ld_config.mk
xxd is used by device/generic/goldfish/tools/mk_qemu_image.sh
Test: none
Change-Id: I707668578d1babe1b149c2c3f989e5f8be37d897
Buildbot parses failure messages that look like ninja errors, but this
error doesn't look like a ninja error. We used to output this via
stderr, which buildbot would fall back to, but that had synchronization
issues between stderr and stdout.
So switch this over to use the status API, marking this action as failed
when necessary, which will display a ninja-like error that buildbot can
parse.
Bug: 112007097
Test: add dangling dep, look at output.
Change-Id: Ib2bbba4373ea22ac01af8aa6bbf295296a93e94d
--warn_real_to_phony will print a warning any time that a non-PHONY rule
depends on a PHONY rule. Since PHONY rules are always considered dirty
this would force rebuilds on every incremental build. Real rules should
always depend on rules that have real outputs.
--warn_phony_looks_real will print a warning any time that a PHONY rule
has an output that looks like a file (has as / in it). This is can cause
confusion for users if it's not a real file, and it shouldn't be marked
as PHONY if it will be run every time (since that will slow down
incremental builds).
Test: run build_test on downstream branches, see few warnings
Change-Id: Id135c85c991976be33cd48a34eba0caaff1eda2c
All of the existing devices that have problems with this are setting
BUILD_BROKEN_DUP_RULES to true. Switch the behavior to default this to
an error.
Bug: 77611511
Test: check logs of all downstream build_test targets
Test: attempt to add an overriden command to hikey960 (uses default)
Change-Id: Ia83089f035925cf0c9883a1f593ae2da89fee568
Ninja now knows how to write directly to a file (or in our case, a named
pipe). This works around an issue we were seeing on Mac, where Go would
just hang after 50-2000 proto messages. It's also just a simpler
solution.
Bug: 111544015
Test: `m` with updated ninja on both Linux & Mac
Change-Id: Ic91920d83a6d2ea0b79e82b467e2423d78189f12
I've noticed a few instances of interleaved status messages in between
lines in a terminal/Writer.Print call on our build servers. Since
there's a lock protecting everything we write, I've got to assume this
is a stdout vs stderr problem. Ninja had always been outputing to
stdout, except for error messages, which are now marked with FAILED:
like failed actions.
Test: m blueprint_tools
Test: m missing
Change-Id: Idf8320d40694abf212c902c63a9703e4440ffb7a
The extra `defer os.Remove(fifo)` was sometimes racing with the next
instance of ninja, removing the file in between when it was re-created
and used. Since we're always removing the file before creating it, it's
safe to just remove that.
The error message for this failure wasn't all that good either, so move
so use the status Print/Error calls inside the goroutine instead of the
logging ones.
Test: `build/soong/build_test.bash -only-soong` repeatedly
Change-Id: Icfeb6b68802093bd3a07d3e46046ef7d1a89d4a1
This adds a new status package that merges the running of "actions"
(ninja calls them edges) of multiple tools into one view of the current
state, and gives that to a number of different outputs.
For inputs:
Kati's output parser has been rewritten (and moved) to map onto the
StartAction/FinishAction API. A byproduct of this is that the build
servers should be able to extract errors from Kati better, since they
look like the errors that Ninja used to write.
Ninja is no longer directly connected to the terminal, but its output is
read via the protobuf frontend API, so it's just another tool whose
output becomes merged together.
multiproduct_kati loses its custom status routines, and uses the common
one instead.
For outputs:
The primary output is the ui/terminal.Status type, which along with
ui/terminal.Writer now controls everything about the terminal output.
Today, this doesn't really change any behaviors, but having all terminal
output going through here allows a more complicated (multi-line / full
window) status display in the future.
The tracer acts as an output of the status package, tracing all the
action start / finish events. This replaces reading the .ninja_log file,
so it now properly handles multiple output files from a single action.
A new rotated log file (out/error.log, or out/dist/logs/error.log) just
contains a description of all of the errors that happened during the
current build.
Another new compressed and rotated log file (out/verbose.log.gz, or
out/dist/logs/verbose.log.gz) contains the full verbose (showcommands)
log of every execution run by the build. Since this is now written on
every build, the showcommands argument is now ignored -- if you want to
get the commands run, look at the log file after the build.
Test: m
Test: <built-in tests>
Test: NINJA_ARGS="-t list" m
Test: check the build.trace.gz
Test: check the new log files
Change-Id: If1d8994890d43ef68f65aa10ddd8e6e06dc7013a
Using ANDROID_BUILD_TOP and other envsetup.sh varialbes is already
forbidden in makefiles, but some tools run by the build (like
hidl-gen) will use it if it is set. Since they are set by envsetup.sh,
and sourcing envsetup.sh before building is optional, unset them inside
the build to get consistent behavior.
Bug: 79250545
Test: m checkbuild
Change-Id: I3e7d9f01390ccdc34c49115f2f15cd7542d9974b
Make the dangling rules list sorted and unique in order to avoid
very long lists when a dangling rule is referenced many times.
Also prettify the output by indenting the list and printing
"stopping" instead of a blank line for the fatal.
Test: m checkbuild
Change-Id: I8f7c27ae39b59f506b529d9995d90b0d6b9835d1
This matches the change to blueprint's blueprint_impl.bash:
https://github.com/google/blueprint/pull/213
It allows us to run bpglob during the two bootstrap phases, so we're
never running minibp or the primary builder in a later phase than
normal.
Also removes the dependency on out/soong/build.ninja from the main
phase, since it's never generated by the main phase anymore, and is
tripping the dangling dependency checks.
Bug: 73646380
Test: m nothing
Test: rm frameworks/base/core/java/android/content/pm/dex/ArtManager.java
Test: m nothing (soong re-runs)
Change-Id: Ia3952d015ad6091ad5a841f555acda78c9390e84
There are no users of these, other than the PDK, which is already
exempted.
Test: m nothing
Test: Check for warnings in downstream build_test logs
Test: Check for warnings in last two days of continuous build logs
Change-Id: I7c7d0068e928e591355c39d22635af86b8f43f1b
Remove support for compiling with javac from OpenJDK8.
We still target 1.8 by default, and OpenJDK8 prebuilts are still
required for the bootclasspath and running robolectric.
Bug: 38418220
Test: m java
Change-Id: I5686deb0ae4f9927192a039d08adc0117b2605dd
This is useful when determining which devices are setting which values
from the logs, cross-referencing where warnings still occur.
Test: look at out/soong.log
Change-Id: I3e3f0e4c8cbd9ce621b03f5163eff2cccfa8c424
Use the OpenJDK9 javac to run ErrorProne by adding it to
-processorpath and using -Xplugin:ErrorProne.
Bug: 69485063
Test: m RUN_ERROR_PRONE=true javac-check
Change-Id: I0496006b71b70766ef16d57753cbcf037897799c
We've turned off suffix rules with .SUFFIXES, but make them explicit
errors.
Test: build_test on downstream branches
Change-Id: I682ee3eb3a8f1451cd7e16f1e1d59afca5d21a26
pkill and sleep are used in
device/generic/goldfish/tools/emulator_boot_test.sh
pgrep is used by GOMA
bc and pwd are used by kernel builds
Test: none
Change-Id: If7004255b4776fa4409fdd4b0aa6d6617b471317
atree was using the host's strip tool during sdk generation, so expose
the prebuilt for use instead.
`id` was used with a test running minijail0 during the build
`sha1sum` is used by development/build/tools/mk_sdk_repo_xml.sh
`rmdir` was being used to remove some tmp files
Test: m PRODUCT-sdk_arm64-sdk dist sdk_repo
Test: Run other builds through forrest
Change-Id: I49c756a3e9497c0bbd9030754e6aa193a2d989a4
This reverts commit 09f4540d66.
Fixes the raw call to net.Listen in the tests to go through the listen()
helper and use the long socket path fallbacks.
Removes the use of timeouts from the tests -- the behaviors being tested
did not rely on timeouts, so removing them will reduce the flakiness if
the build is heavily loading the machine at the same time the test is
running.
Also fixes some potential nil pointer dereferences.
Test: OUT_DIR=<really long> m blueprint_tools
Test: `while .../soong-ui-build-paths/test/test; do sleep 0.01; done` with a build running
Change-Id: I16d44be7517bc415f1c808284088f4ba40df3bfa
This reverts commit c59a92cb1a.
Reason for revert: tests are broken with long OUT_DIRs
They're directly calling net.Listen, and not using the fallback
for long socket names.
Change-Id: Id14cbd499fd9b36c6926b7552d3554340cb0916c
This reverts commit 96c957ae20.
Fixes issues on some machines where the socket in TMPDIR ended up with a
unix domain socket pathname over 107 characters long, which Go will
reject due to underlying limitations in the system calls. If this
happens, we'll fall back to opening the directory, then using
/proc/self/fd/#/<file>, or manually creating a similar symlink in /tmp.
Also fixes some issues on Mac where os.Executable returns the symlink
instead of the underlying file, sending a message over a unix domain
socket will block if the reader isn't reading, and sandboxing was
preventing us from running `ps`.
Test: m blueprint_tools
Test: m blueprint_tools on mac
Change-Id: Ib19ccfe10cb0a79f1476fb1d5cd20ed0495be367
This will allow us to track (and eventually limit) the commands that the
build references via $PATH. These are mostly implicit dependencies on
the host system -- for Linux, we assume something similar to Ubuntu
14.04 with a few extra packages, but this will let us better define
that.
This will not catch uses of tools with absolute paths (/bin/bash, etc),
but most uses shouldn't be relying on absolute path names anyways.
Adds ~400ms on the first startup, ~140ms on subsequent runs, and
overhead of a few ms for every forwarded execution.
Test: m
Test: build/soong/build_test.bash
Test: Add `gcc --version`, TEMPORARY_DISABLE_PATH_RESTRICTIONS=true m
Change-Id: Id68cbb1c8ceef65bbbb10751e83722c7662d2351
Some tests make their temporary directories readonly. If they fail or
crash before cleaning up, they could leave these readonly directories
behind with files in them. os.RemoveAll fails with an error in this
case, and we can't start the build until they're removed.
Test: `m blueprint_tools` to run the new go tests
Change-Id: I761f96579e96167ebfd98c6cca59765bd50536ec
So that we can see where the time is going. Also removes the obsolete
ASAN_OPTIONS, which moved to kati, but I forgot to update this instance.
Test: m nothing; check out/soong.log
Change-Id: I0c4066bad20fc2dc22b389f4c973d10dca554ee3
The find commands used to locate the BoardConfig.mk can't be optimized
by Kati, so we're currently spending ~125ms three times during every
build (dumpvars, cleanspec, and the main kati run). Preserve the value
of TARGET_DEVICE_DIR from the dumpvars run so that we only need to run
the find commands once.
Bug: 78020936
Test: out/build-taimen.ninja is identical
Test: out/soong.log shows that we're not running these finds again
Change-Id: Iee56b454c3661de2b58c161169218ecaf2135398
I got a report of a user exporting CDPATH in their shell and causing
strange issues in the build. We should never need this value (and it
probably shouldn't be exported from the shell either -- that was their
workaround).
NDK_ROOT causes issues with Android.mk files thinking that they're
building with the ndk (like external/googletest/googletest/Android.mk).
Bug: 78933670
Test: CDPATH=. NDK_ROOT=test m; check out/soong.log
Change-Id: Icce43d7e31ed5e5e1fb7a4e37fd4dfbf421af4b1
Many board still have this problem, but if we can switch some over,
we'll prevent global problems and have the ability to clean boards up
one-by-one.
Bug: 77611511
Test: lunch aosp_arm-eng; m nothing
Test: lunch aosp_marlin-eng; m nothing
Test: build_test on all downstream branches
Change-Id: I78bee44adde2059d01188658b9050927748d2028
Some people have run into issues where /tmp is on a smaller partition
than their main source tree, and if it fills up (or only has a few GB
free), their builds can start failing.
There may also be a subset of people whose /tmp may be slower than their
out directory -- if they put their src and out trees on a SSD, but keep
/tmp on a spinning HDD.
Bug: 71755844
Test: check out/soong.log for TMPDIR
Test: do a build, watch out/soong/.temp
Change-Id: Ib749ec736ad0f6c8ce7453861a91b3e99ddbd92d
If Kati ever wrote a line over 64k characters, the scanner in soong_ui
would error, and Kati would hang trying to write into the pipe. Now if
the Scanner errors out, fall back to copying directly from the pipe to
the output.
Test: Add $(warning $(shell find frameworks)), does not hang
Change-Id: I86412ad2f53f2fe3cbda901ee673abb904d56d3c
Soong_UI will update timestamp to build_date.txt, and export variables
to kati/ninja.
Test: m -j32
Bug: b/70351683
Change-Id: I153897afdf2d3f39a32d757d4c3ae7515caea52d
We were previously setting GOROOT to "prebuilts/go/linux-x86" during the
ninja executions when we were running Soong. But we can also run Soong
during the main ninja execution, were GOROOT was unset. When the GOROOT
was unset, the default GOROOT in our Go installation is
"./prebuilts/go/linux-x86" (note the extra ./).
This would cause g.bootstrap.goRoot to change between some soong runs,
causing us to rebuild all go programs (and anything depending on them)
more often than necessary.
So instead, keep GOROOT undefined when running Soong. Everything that
matters is using runtime.GOROOT(), which will fall back to the default.
Continue setting $GOROOT for bootstrap.bash, otherwise it fails when
there is no system provided go binary. What we give bootstrap.bash
doesn't really matter, since we don't actually use the blueprint wrapper
in Android.
Test: m blueprint_tools; touch bionic/libc/tzcode/new.c;
m blueprint_tools <doesn't rebuild everything>
Change-Id: I82f30c7c3b5d25e5cbf28fe37a97fdb776c4a164
This ensures that the current locale supports UTF-8, and that we're
getting a consistent (but still supported by the system) locale for
every configuration except user-facing messages. This should eliminate
any reproducibility problems around sorting, formatting, etc for all
built products, while still showing localized error messages where
available.
Bug: 71573630
Test: LANG=es_ES LANGUAGE=es: m (check env in soong.log)
Change-Id: If33311899eaed8c44573113ee35c5a71cee503a0
