This CL changes the logic in rust/builder.go so that some rustdoc flags
are only applied to external crates. This will allow us to since
warnings and deal with soft-failures in external crates while allowing
us to be more strict with our internal Rust code.
Bug: 195136952
Test: m rustdoc
Change-Id: Icdde304bbbb323cae9657e8f842f58ae79e811ce
Split the x86 host toolchain into glibc and musl variants
Create new musl toolchains that are based on the existing glibc
toolchains, and add the necessary flags for musl compiles.
This relands Ifc02f9e5afa61ff758be98b0c962f3a4b53d0546 with changes
for I46672e3a096b6ea94ff4c10e1c31e8fd010a163c.
Bug: 190084016
Change-Id: Iaa9f7a50ff601155ecd73acc5701a2c226be66dc
Test: TestArchMutator
Create new musl toolchains that are based on the existing glibc
toolchains, and add the necessary flags for musl compiles.
Bug: 190084016
Test: TestArchMutator
Change-Id: Ifc02f9e5afa61ff758be98b0c962f3a4b53d0546
Previously, a module reference in a path property would be parsed into
two parts, the module name and the optional output tag, which defaults
to an empty string if not specified. The output tag would be stored in
a sourceOrOutputDependencyTag which would then be used, along with the
module name to add a dependency on the module.
Later, when the paths were processed the same module reference would be
parsed into the same two parts again and the module name used to find a
matching Module by comparing it against the name returned by either
Module.Name(), ctx.OtherModuleName() or ModuleBase.BaseModuleName().
Once the module had been found then if it supported OutputFilesProducer
then the tag would be passed to its OutputFiles(tag) method. Otherwise,
it would fall back to treating it as SourceFilesProducer.
The problem with that is the module name retrieved from the module in
some way (either directly or through a context name) could be different
to that originally supplied when adding the dependency. e.g.
1. If the original dependency was added onto a source module but there
existed a suitable and preferred prebuilt module then the dependency
onto the source module would have been replaced by the prebuilt
module which has a different name.
2. If the path property included a fully qualified name that included
a qualifying path then it would not match the name retrieved from
the module which would not include the qualifying path.
This change circumvents that whole issue by adding the module name that
was originally used to add the dependency into the DependencyTag. Now
the DependencyTag uniquely identifies the original module/outputTag
pair parsed from the module reference. The pathDepsMutator guarantees
that they are unique as it dedups them before adding the dependencies.
It is possible that calling ExtractSource(s)Deps() would add some
duplicate but if they did they would be identical, i.e. the same
sourceOrOutputDependencyTag would be used to add a dependency onto the
exact same module. In that case it would not matter which of the
dependencies was found as it would still return the same module.
Bug: 193228441
Test: m nothing
Change-Id: I661514a2984818e5c26577411cede53eb57bcd02
PathForModuleSrc calls validatePath in order to convert the supplied
path components into a single path. Unfortunately, that corrupts a
fully qualified module name. So, when given "//namespace:module" it
treats it as a path and replaces "//" with "/". That replacement is
done by a call to filepath.Join().
This change simply concatenates the path components together textually,
using the path separator, to avoid the corruption. That ensures that
a fully qualified module name is preserved and processed properly. If
the path components do not contain a module name then expandOneSrcPath
will call pathForModuleSrc which validates the path so it does not open
up a way to create an invalid path as the validation was unnecessary
anyway.
Bug: 193228441
Test: m nothing
Change-Id: I0bb66feac182b77ce96c8d5d5f17e28ea28d75ba
Previously, modules customized behavior around the handling of
sourceOrOutputDependencyTag by comparing them to android.SourceDepTag
and retrieving the module using something like this:
ctx.GetDirectDepWithTag(m, android.SourceDepTag)
The problem with that is it does not allow an output tag to be
specified and does not handle fully qualified names properly.
This adds the following:
* IsSourceDepTag and IsSourceDepTagWithOutputTag to check whether a
blueprint.DependencyTag is a sourceOrOutputDependencyTag. The latter
also checks that it has the correct output tag.
* GetModuleFromPathDep(ctx, moduleName, outputTag) as a replacement for
ctx.GetDirectDepWithTag(m, android.SourceDepTag).
Replaces usages of:
* t == SourceDepTag with IsSourceDepTagWithOutputTag(t, "")
* ctx.GetDirectDepWithTag(m, android.SourceDepTag) with
GetModuleFromPathDep(ctx, m, "")
It also deprecates the following:
* android.SourcDepTag - as a follow up change needs to modify the
sourceOrOutputDependencyTag will make this useless.
* ExpandSources, ExpandsSources - copies existing deprecated messages
from the implementation to the interface so that they can be seen
by users of that interface.
Bug: 193228441
Test: m nothing
Change-Id: I8c397232b8d7dc1f9702c04ad45ea7819d4631ae
The default partition for RRO is "product/" in Make, but it was
"system/" in Soong. This CL ports the logic from Make to Soong
To implement this, a new function PathForModuleInPartitionInstall is
created that enables callers to provide the relevant partition
Bug: 158407753
Test: from build/soong, ran go test ./java
Change-Id: I05b02eae7fe57189aaad5109c26cccc5823518ef
Appending a Path or Paths to a slice of Paths is simple but appending
an OptionalPath requires conditional logic which makes OptionalPaths
harder to use. This change makes it easy to append the embedded Path,
if any, to a slice of Paths.
Bug: 179354495
Test: m nothing
Change-Id: Ibf80a23043c846162e17c3a98b2590bca653b170
Allow blueprint_go_binary to be used as test data by supporting it in
PathForModuleSrc.
Also make python use GetDirectDepsWithTag instead of VisitDirectDeps
so it doesn't fail on the dependency to a Blueprint (non-Android)
module.
Fixes: 186528269
Test: manual
Change-Id: Ibc1d7caf7bf1fa5db805c3b885a95df4baee0ecf
A module will be installed to /debug_ramdisk if debug_ramdisk is set to
true.
This is a reland of f84e9c05e2, with a fix
that removes /first_stage_ramdisk.
Bug: 184004542
Test: soong test
Change-Id: I739de63cfec6b0fec5a90f7c4741fc4d884d209c
This reverts commit f84e9c05e2.
Because this breaks the usage of boot-debug.img and
vendor_boot-debug.img
Bug: 185970130
Bug: 185990198
Test: make bootimage_debug
Change-Id: I7886c971982faae1d5bc34688643de8d94d6e201
A module will be installed to debug_ramdisk (or
debug_ramdisk/first_stage_ramdisk if recovery as boot is true) if
debug_ramdisk is set to true.
Bug: 184004542
Test: soong test
Change-Id: Ic5a4d27407e506fffa462de2149e0785f11b2ac7
This allows the following cc_library_static targets to build with bp2build:
- libc_freebsd
- libc_freebsd_large_stack
- libc_openbsd_ndk
- libc_gdtoa (* but still fails for mixed builds)
- libc_aeabi
- libc_static_dispatch
- libc_dynamic_dispatch
This also allows a number of other cc_library_static targets to progress further in their builds.
Test: Added unit test
Test: bp2build-sync.py write; bazel build //bionic/...
Change-Id: I71742565c16594448a41a6428a5c993171ec4cb4
Follow I2159cc9d85f388073198eac7456e5bf43e813096 that makes Glob
return a GlobResult.
Bug: 159845846
Test: glob_test.go
Change-Id: Ia771bdbdf1eb668623c4b3f00bf65e0e1e3a55c0
This CL contains the converter for libdl_android, a cc_library that
expands into a cc_shared_library and a regular cc_library.
Test: TH
Test: bp2build; bazel test //build/bazel/tests/...
Change-Id: If70641a538211b0d6b2aac0e4d0d06912318304d
Makes Path.RelativeToTop the source of truth as to what `relative to
top` means.
Uses it in PathRelativeToTop so that it will be tested by the existing
tests that use AssertPathRelativeToTop.
Also adds RelativeToTop() to WritablePaths and Paths.
Bug: 183650682
Test: m droid
Change-Id: I88dc56afd1314e51b4e41795a2448cab4ce8a899
First, the buildDir() method was renamed to getBuildDir() to avoid
clashing with the buildDir field.
Then, a buildDir was added to both `OutputPath` and `InstallPath` but
not to `PhonyPath` as it does not contain any path components. Instead
the `PhonyPath.getBuildDir()` was changed to simply return "".
Bug: 183650682
Test: m droid
Change-Id: I12e1854c829b980c5c01205753c62c00dc0a4774
This CL adds the support for specifying lists of directories in
build/soong/android/bazel.go, which are then written into
out/soong/bp2build/MANIFEST. Using this configuration,
modules/directories can either default to bp2build_available: true or
false, while still retaining the ability to opt-in or out at the module level.
It also ensures that ConvertWithBp2Build returns true iff the module
type has a registered bp2build converter.
Test: go tests
Test: demo.sh full
Test: TreeHugger presubmits for bp2build and mixed builds.
Change-Id: I0e0f6f4b1b2ec045f2f1c338f7084defc5d23a55
If a genrule depends on a module that is disabled, in this case because
it is a device module in a host-only build, it can cause panics when
getPathsFromModuleDep retrieves a nil Path from the disabled module.
Treat disabled modules as missing dependencies.
Test: TestGenruleAllowMissingDependencies
Change-Id: I3c689c6b5505b21eaf7ae7cb93c00f96f438ac17
modules converted with bp2build_available are will also be available to
be used in mixed builds.
Test: build/bazel/scripts/milestone-2/demo.sh full
Test: go tests
Change-Id: I49f16ec3ba5bb11dfed8066af069c27eb04371fb
Rename to get consistent ramdisk directory naming in
out/target/product/<name>:
debug_ramdisk
ramdisk
vendor_debug_ramdisk
vendor_ramdisk
Test: build and inspect out/target/product/<name>
Change-Id: Ib86e6509bd910e8c95bcb6e3f7bb639ebbfe3758
Specify that these paths are relative to SrcDir, not relative to a
module's local source directory.
Test: n/a
Change-Id: I9a80f19b2eb3a15e6276e98200796b0680af9ee7
Export information about java dependencies through a Provider
instead of accessing the module directly.
Test: java_test.go
Test: no changes to build.ninja
Change-Id: Ifc5d566bf6f6ebc0ad399e948effaa1ef6a22876
This currently expands all globs, still need to support converting glob
syntax.
Test: go build_conversion_test
Test: GENERATE_BAZEL_FILES=true m nothing
Test: m nothing
Bug: 165114590
Change-Id: If7b26e8e663d17566fad9614ca87a8da1f095284
Extracts out the relevant pieces of ModuleContext into a minimal
interfaces necessary for path handling for Modules. This will allow
reuse in queryview by allowing it to implement only the parts of the
module interface necessary for path expansion in order to properly
handle path properties.
Test: go test soong tests
Change-Id: Iea39a365e5a2ff55071e435fb64f9e6464bbcafd
Splits queryview into queryview and bp2build. The latter runs as a
presingleton (could be converted to a singleton). This prevents needing
to run soong_ui a subsequent time to build the query. Queryview remains
as a separate step to prevent increasing runtime due to this generation
every time Soong runs.
Currently this is running as a presingleton as this gives a translation
of Android.bp files after only LoadHooks have run, no mutators.
Test: go tests
Test: m queryview && bazel query --config=queryview //...
Change-Id: If2ba28c7ef60fbd41f43bda6623d41c8c7d23a1b
This effectively moves execution of Bazel actions outside of soong_build
and alongside ninja execution of the actual ninja files, whether that be
by ninja or by Bazel itself.
This almost allows for mixed builds and Bazel-as-Ninja-executor to
coexist, but requires hacks explained in b/175307058.
Test: Treehugger
Test: lunch aosp_flame && USE_BAZEL_ANALYSIS=1 m libc
Test: lunch aosp_flame && USE_BAZEL=1 USE_BAZEL_ANALYSIS=1 m libc,
though this requires a hack of the main BUILD file. See b/175307058
Change-Id: Ia2f6b0f1057e8cea3809de66d8287f13d84b510c
Export files to install through a depset instead of a list to reduce
the size at each module.
Bug: 124313442
Test: m checkbuild
Change-Id: I6a51c89acc9f0f3a9c3c792d3ef8a7cfd6b8bef2
sbox.textproto files are created when handling genrule. The command
for the genrule and output files are written to this file in the
following format:
commands <
command: "...."
copy_after: <
from: "out/asm-generic/auxvec.h"
to: "out/soong/.intermediates/kernel/msm-4.19/qti_generate_kernel_headers_arm/gen/asm-generic/auxvec.h"
>
copy_after: <
from: "out/asm-generic/bitsperlong.h"
to:
"out/soong/.intermediates/kernel/msm-4.19/qti_generate_kernel_headers_arm/gen/asm-generic/bitsperlong.h"
>
....
>
This file grow by one copy_after entry for each output file.
When generating kenrnel headers where the number of output files are
~1000 we run into problems as the contents of sbox.textproto files
are written to disk by generating a shell script using the following
template: /bin/bash -c 'echo -e "$$0" > $out' $content
If $content is very long as in the case of generating kernel headers we
run into the issue where the command line is so long that the shell
script return E2BIG.
Fix this issue by chuking contents into smaller files and then merge
them as a final step.
Test: Build
Issue: 174444967
Change-Id: I1a74023b4222d19672e4df7edb19810a9cf2136f
... and ramdisk_available modules. If a module is both
vendor_ramdisk_available and ramdisk_available, on a device
that mark recovery_as_boot and move_recovery_resources_to_vendor_boot
simultaneously (and incorrectly),
both will be installed to recovery/root/first_stage_ramdisk. Fix the
path conflict of the two variants by moving the vendor_ramdisk variant
to vendor-ramdisk/first_stage_ramdisk instead.
Also update comments for Vendor_ramdisk_available.
Test: m nothing -j
Bug: 156098440
Change-Id: I2b776b6fd8f5a2c361c0f6a89231e3cebc2646f0
Install to recovery/root/first_stage_ramdisk if
BOARD_MOVE_RECOVERY_RESOURCES_TO_VENDOR_BOOT,
otherwise vendor-ramdisk. In addition, append /system
if not InstallInRoot().
On devices with dedicated recovery partition,
BOARD_MOVE_RECOVERY_RESOURCES_TO_VENDOR_BOOT is not set,
and this installs to the correct place (under $OUT/vendor-ramdisk).
On devices without a dedicated recovery partition:
- To install a module available before switching root
to /first_stage_ramdisk, e.g. a binary under /system/bin,
use recovery{_available} and install the recovery variant
of the module.
- To install a module available after switching root
to /first_stage_ramdisk, e.g. a binary under
/first_stage_ramdisk/system/bin,
use vendor_ramdisk{_available} and install the vendor_ramdisk
variant of the module.
Test: pass
Bug: 156098440
Change-Id: I1af3f8889891a3e58263cda36f0680ce2b480499
Add vendor_ramdisk_available and vendor_ramdisk attribute to
various rules. When a vendor_ramdisk variant of a module is
generated, it is installed to $OUT/vendor-ramdisk.
It is similar to a ramdisk image.
Test: m nothing -j
Change-Id: Ib2d16459f3094dbe21c3bdb7c016cb4b2bf62765
This change introduces the concept of partition dir for InstallPaths.
It's the path to the partition where the InstallPath is rooted at. For
example, it's out/soong/target/product/<device>/<partitoon> for paths
created for device modules. For host modules, it is defined as
out/soong/host/<host_os>-<host_arch>.
The partition dir is obtained using the new PartitionDir() function.
Another change is that a freshly created InstallPath (usually via
PathForModuleInstall) is the result of joining PartitionDir() and the
remaining path elements. For example, PathForModuleInstall(ctx, "foo",
"bar").Rel() now returns "foo/bar". Previously, that call returned the
relative path from config.buildDir() ("out/soong"). This change is in
line with the behavior of other path-creating functions like
PathForModuleSrc where Rel() returns the path relative to the
contextually determined path like the module source directory.
Notice that the Join() call to InstallPath doesn't change
PartitionDir(), while does change the result of Rel().
p := PathForModuleInstall(ctx, "foo", "bar")
p.PartitionDir() is out/soong/host/linux-x86
p.Rel() is foo/bar
q := p.Join(ctx, "baz")
q.PartitionDir() is still out/soong/host/linux-x86
q.Rel() now returns baz
Bug: N/A
Test: m nothing
Change-Id: I916bb1c782a4bfe0fbd4854e349cd2a2a42f56b6
This change fixes some places where host arch is assumed to be x86 to
form a path element like linux-x86. In preparation for non-x86 host
targets, the host arch part is derived from the context.
In addition, InstallForceOS() is refactored so that it can override not
only OsType, but also ArchType. Without this, the paths for the
robolectic modules will be changed from linux-x86 to linux-common, which
breaks several other places where the old paths are expected.
Bug: 134795810
Test: m
Change-Id: Ib38c715948ae546e55021ece82bac1d82e9e5da0
Add a rule to build a zip containing the lint reports from transitive
dependencies for apps, and pass it to Make.
Bug: 153485543
Test: m TARGET_BUILD_APPS=Gallery2 lint-check
Change-Id: I523c09016251377ff89d76084769be7401b95425
"excludes" should be applied both SourceFileProducer and
OutputFileProducer. But we've been missing the latter.
(see android/paths_test.go)
There's one more to note. Previously, the exclusion was done by
modifying slice directly, which caused some problem(b/76179848).
The fix was returning a copy from Srcs() method. But there're still many
implementors which just return internal slices directly.
This change creates a new array when it needs to exclude something from
returned slice.
Bug: n/a
Test: m (soong test added)
Change-Id: I1ba91e490cb55fc243020681667278cdc75f59df
Specifically, make Android.bp.list and soong.variables explicit inputs
While this is not a comprehensive list of all inputs
of this action (as the action depends on all blueprint
files in the source tree), this is closer to the truth.
This is a rollforward CL, which was originally rolled
back, as path validation failed for when OUT_DIR was
an absolute path. Validation has now been relaxed.
Test: Manually verified ninja output, checkbuild approved validation
for aosp-crosshatch, and manually ran frameworks/rs/build_rs.py with
patch fix
Change-Id: I4eb0d517f57336dd54eaa4bd31f46df9e93e6da2
This CL adds "dists" to the base property struct to support multiple
dist file configurations, and generic tag support to dist tagged outputs
of modules.
Fixes: b/152834186
Test: soong tests and `m sdk dist`
Change-Id: I80c86bc9b7b09e671f640a4480c45d438bdd9a2a
Signed-off-by: Jingwen Chen <jingwen@google.com>
While this is not a comprehensive list of all inputs of this action (as the action
depends on all blueprint files in the source tree), this closer to the truth.
Test: Manually verified ninja output, checkbuild approved validation for aosp-crosshatch
Change-Id: I77a0f612afb025232bee7d3ac31257b808991829
Forcing every test to specify every file it wants to pass to
PathForSource or PathForModuleSrc is painful to maintain and
doesn't add any value. Allow tests to reference paths through
PathForSource and PathForModuleSrc without specifying them in
the mock FS.
Test: all soong tests
Change-Id: Ia8a8fd965a338d0645b3721314bf91f50146ad21
Following how NDK also creates its own install path.
Bug: 142935992
Test: cc_sdk_test.go, java_sdk_test.go
Change-Id: I98a3656903f37f6d7c90e6cf609431b2461a6161
FirstUniquePaths is called on some long lists where the O(n^2)
behavior is problematic. Use a map-based implementation for
longer lists.
Test: TestFirstUniqueStrings
Change-Id: I7181aba869e5ccc0f99c2fa7b8f03839f06e4307
pathForInstall will allow code in the android package to get paths
to the install directory.
InstallPaths provides helpers for handling lists of install paths.
Test: m checkbuild
Change-Id: I058201b205bc8bc67f3c1f62952aaaf758c47fd8
Robolectric tests compile against device modules but are installed
and run as host modules. Allow a module to override its install
OS.
Test: TestPathForModuleInstall
Change-Id: Icf37bb3d4cc1222a9b079602c6a5fdb8b51c86ed
In an AOSP aosp_blueline-userdebub build, OutputPath.String was
allocating 802MB of strings in filepath.Join to prepend the
out dir to each path. Allocate the joined string in PathForOutput
instead, which results in ~57MB of new allocations in PathForOutput
but no allocations in OutputPath.String.
Test: all soong tests
Change-Id: Id452e0c46a2aeda71bfac11a227bb6edb8e3523d
Install to recovery/root/first_stage_ramdisk if BOARD_USES_RECOVERY_AS_BOOT,
otherwise ramdisk. In addition, append /system if not InstallInRoot().
Test: pass
Bug: 147347110
Change-Id: Ie5895ac61a3d5d85f5d958a27c7980d6c79d997e
This relands I12a0f907753fefd1997ab8b4ea2ac331234093cf along with
a fix to blueprint for absolute paths.
Store the current working directory and then change to the root
directory so that all file accesses must go through helpers in
the android package that properly track dependencies.
Change-Id: I24ac485677aa102eec1a2521d16820da6ee1ae77
Fixes: 146437378
Test: m checkbuild
Test: m OUT_DIR=/tmp/out nothing
Store the current working directory and then change to the root
directory so that all file accesses must go through helpers in
the android package that properly track dependencies.
Fixes: 146437378
Test: m checkbuild
Change-Id: I12a0f907753fefd1997ab8b4ea2ac331234093cf
Make LoadHookContext embed a new EarlyModuleContext instead of
BaseModuleContext to reduce its API surface in preparation for
moving it to run during parsing instead of mutators.
Test: m checkbuild
Change-Id: I1cd3ff3b636e7e24991a9184d7521903473e505a
Changes prebuilt_stubs_sources to generate a .srcjar from its input
instead of just exposing the srcs it is given. This ensures that it can
be used as a drop in replacement for a droidstubs module.
Updates the test for prebuilt_stubs_sources to be more representative
of the actual use made of it by sdk snapshot which outputs a directory
not a glob pattern. Added some documentation of the
prebuilts_stubs_sources srcs property to make it clear that it is
supposed to be a set of directories.
Extracts common code from sdk/testing.go for normalizing path/paths
for testing.
Bug: 143678475
Test: m conscrypt-module-sdk conscrypt-module-host-sdk conscrypt-module-test-sdk
unzip those in place of external/conscrypt
build core-current-stubs-source which expects it to provide a .srcjar.
Change-Id: I8204a022557a9b0b45e19eac79ecba98ff95213d
Add OutputFileForModule and OutputFilesForModules to get paths from
OutputFileProducers.
Bug: 122332855
Test: m checkbuild
Change-Id: I2e9aeeb55987742077250390cdb804ba22e79442
The filesystem object was available through ModuleContext.Fs(), but
gives too much access to the filesystem without enforicing correct
dependencies. In order to support sandboxing the soong_build
process move the filesystem into the Config. The next change will
make it private.
Bug: 146437378
Test: all Soong tests
Change-Id: I5d3ae9108f120fd335b21efd612aefa078378813
The exported include dirs includes both source and generated
directories (e.g. containing aidl generated headers). The latter are
always arch specific so if they are present they make all the include
directories arch specific.
This change separates the source and generated include dirs so that
the source include dirs (which are probably not arch specific) can be
optimized separately from the arch specific generated include dirs.
The FilterPathList() func was refactored to extract the more general
FilterPathListPredicate() func.
A number of tests needed to be updated to reflect the more optimal
snapshot creation.
Bug: 142918168
Test: m checkbuild
Change-Id: Id1a23d35a45b250ae2168834f9c2a65c86a5fd77
This patch splits the system boot image in two parts:
- The ART boot image. This is the primary boot image that is
included in the ART apex and contains dexpreopted Core Libraries.
- The framweork boot image extension. It depends on the ART boot
image and contains framework libraries.
The third "apex" boot image (used in the JIT-zygote experiment)
remains unchanged; it is a monolithic primary boot image that
contains both libcore and framework libraries.
Dexpreopting of APKs now uses the framework boot image extension
(which in turn pulls in the ART boot image as a dependency).
Test: m
Test: phone boots:
lunch aosp_walleye-userdebug && m \
&& adb reboot bootloader && fastboot flashall -w
Bug: b/119800099
Exempt-From-Owner-Approval: rebased after getting approval.
Change-Id: Ida40dfae8c83bf7c2e737d5c7ea418e1197ad826
Add a ToMakePath() method that returns a new path that points out
out/ instead of out/soong/, and replace the
"$(OUT_DIR)/" + path.RelPathString()
pattern with
path.ToMakePath().String()
Bug: 141877526
Test: m checkbuild
Change-Id: I391b9f2ed78c83a58d905d48355ce9b01d610d16
Create a new type InstallPath that is similar to OutputPath to
differentiate intermediates output paths from installed output
paths.
RelPathString is a poorly defined, undocumented function that is
primarily used to get an install path relative to out/soong to
generate an equivalent install path for Make relative to $(OUT_DIR).
Move it to InstallPath for now, and fix the one remaining user on
OutputPath.
Add a method to create an NDK install path so that ndk_sysroot.go
doesn't have to do it manually with PathForOutput.
Bug: 141877526
Test: m checkbuild
Change-Id: I83c5a0bd1fd6c3dba8d3b6d20d039f64f353ddd5
If InstallInRoot() returns true the module will be installed to
$OUT/root or $OUT/recovery/root.
Bug: 141877526
Test: m checkbuild
Test: no change to build.ninja or Android-${TARGET_PRODUCT}.mk
Test: TestPathForModuleInstall
Change-Id: Id6e435c6019f11eeb5806528fd464dbf220b88d9
* changes:
Introduce inject_bssl_hash library property.
BoringSSL FIPS build - introduce extraLibFlags and use for STL libs.
Allow linker scripts when building objects.
Allow .o files as srcs.
