This patch reworks the approach introduced in
https://r.android.com/1450819. That patch based the decision which
libraries should be added to the manifest <uses-library> tags by the
manifest_fixer on the "shared" status of the library.
That approach is incorrect for two reasons:
- It doesn't make sense to have a non-shared library in class loader
context ("shared" libraries are those specified in
frameworks/base/data/etc/platform.xml, and they are the only ones
that PackageManager knows about).
- It doesn't make sense to add anything but the top-level of the
class loader context tree to the manifest, because this part of the
tree is flattened to a sequence, and PackageManager cannot restore
it to the previous tree shape (there is an information loss).
This patch removes the "shared" bit of information from class loader
context elements and assumes that all libraries that end up in class
loader context are shared. Consequently, only the top-level libraries
should be passed to manifest_fixer.
Test: lunch aosp_cf_x86_phone-userdebug && m
Bug: 132357300
Bug: 168686456
Change-Id: I902690f0f38f1047fa79cf6ccbe956077eceaab0
When adding a subcontext in a class loader context tree, there are two
possible cases: 1) the root of the subcontext is itself a <uses-library>
and should be present as a node in the tree, or 2) the root is not a
<uses-library>, but some of its dependencies are -- in that case they
should be disconnected from the root, and the resulting forrest should
be added at the top-level.
Example:
1) C is a <uses-library>:
A
├── B
└── C
├── D
└── E
└── F
2) C is not a <uses-library>:
A
├── B
├── D
└── E
└── F
Before the patch subcontexts for transitive dependencies were added
before the subcontext for the direct dependency (even if it was a
<uses-library>, resulting in case-2 hierarchy when case-1 should have
been used. Previosuly this didn't matter because class loader context
was a flat set of libraries, but now it matters because class loader
context is a tree.
This patch changes the order in which libraries are added, so that
direct dependencies are added before transitive ones. The context adding
method now accepts an "implicit root" parameter, so that when adding
transitive dependencies it can check if the corresponding direct
dependency is a <uses-library> and already present in the context.
Partially constructed class loader context is now propagated top-down
into aapt.buildActions, so that the method can use existing part of the
context to decide where the missing part should be connected.
Test: lunch aosp_cf_x86_phone-userdebug && m
Bug: 132357300
Change-Id: I649aff9e27494306885a4f4fc90226c399636b57
Nested conditional context doesn't make sense because conditional
context is only needed for compatibility libraries, and those are only
used by apps, and apps are always at the root of class loader context
tree. Therefore, trying to add conditional nested context can only mean
an error somewhere on the way.
Test: lunch aosp_cf_x86_phone-userdebug && m
Bug: 132357300
Change-Id: Iadeaaf89fdb11cb23b107c6fb074b1bc765256be
The android.WriteFile rule takes careful escaping to produce the
right contents. Wrap it in an android.WriteFileRule that handles
the escaping.
Test: compare all android.WriteFile outputs
Change-Id: If71a5843af47a37ca61714e1a1ebb32d08536c31
The old representation consisted of a list of libraries (UsesLibraries),
a list of optional libraries (OptionalUsesLibraries) and a mapping from
library name to its build/install paths (LibraryPaths). The separation
into lists and map was necessary because of special handling of
compatibility libraries, which is now unified with normal libraries.
The new representation is a mapping from target SDK version to a tree
structure ClassLoaderContext. Each node of the tree represents a library
and contains library name, build/install paths and a slice of
subcontexts for dependencies. The same library may occur in the tree
multiple times in case it is a dependency of multiple libraries. The
order in which libraries are added matters (the resulting tree shape may
be different).
Test results have to be updated, as the resulting <uses-library> list is
reodered (previously it was a sorted list of map keys, and now it is
formed by a depth-first preorder traversal of the class loader tree).
Test: lunch aosp_cf_x86_phone-userdebug && m
Bug: 132357300
Bug: 168686456
Change-Id: I11be8cd2967f004fd58753d7c5fb99fed179cd63
This dependency is incorrect and shouldn't exist.
It has been removed in https://r.android.com/1467918
Test: m nothing
Bug: 170710203
Bug: 132357300
Change-Id: If3036437e138b552436f135425e6bd15be043678
construct_context.py is a script that runs at Ninja stage and constructs
class loader context arguments for dex2oat. Previously it accepted lists
of library paths and concatenated them into one class loader context
string. The script also handled the dependency of "android.hidl.manager"
on "android.hidl.base" that is not tracked by the build system and must
be handled in a special way.
Now that class loader context representation is going to change from
flat lists to trees, passing paths to individual libraries as script
arguments is no longer possible, because a list of paths cannot
represent a class loader context tree. Passing the trees in a serialized
form is also inconvenient, because the script would have to parse them,
which would complicate it a lot.
Therefore this patch ports all the concatenation and "android.hidl.base"
handling to Soong. It is not possible to port the remaining script to
Soong because Soong has no information about the targetSdkVersiion of
the dexpreopted apps (it is in the manifest and sometimes in an APK, and
has to be extracted at Ninja time).
Test: construct_context_test.py
Test: new subtests in TestUsesLibs
Test: lunch aosp_cf_x86_phone-userdebug && m
Bug: 132357300
Change-Id: Icdb03cf00d1e27e4cff3844b89bfaec4de502dd7
Mimick the way PackageManager handles it at runtime: do add it to class
loader context for apps with targetSdkVersion < 30, but only if
"android.test.runner" is used. Previously it was not added at all.
Test: lunch aosp_cf_x86_phone-userdebug && m
Bug: 132357300
Change-Id: I4c06635277ab13e21069b9fa0b46eb6a2547dfdd
Also, add tests for compatibility libraries in class loader context.
This CL separates special-case handling of compatibility libraries into
a "fixup" step that is done after class loader context is constructed by
Soong. This allows to handle compatibility libraries and normal
libraries uniformly, which should enable further simplification of class
loader context representation (in subsequent CLs).
Currently the only "fixup" step is removal of libraries from conditional
class loader context if they already are in unconditional context. This
check cannot be done at the time when the libraries are added to
conditional context, because the full uncoditional context is not yet
known at that time. Previously construction of unconditional context was
delayed, now it is no longer delayed and handled in the same way as
unconditional context, and the "fixup" does the filtering.
Test: lunch aosp_cf_x86_phone-userdebug && m
Bug: 132357300
Change-Id: Ie71e9fb2d3d529b5317cd84e09ab3c853017c349
This change removes the properties in GlobalJSONConfig that are used to
hold the unmarshalled []string along with the code to convert them into
ConfiguredJarList as they are no longer necessary because the
ConfiguredJarList.UnmarshalJSON(..) method can handle that automatically.
Bug: 171479578
Test: m nothing
Change-Id: Ie297cd00cb23d12e544d922454868db6fe9eb77c
This reverts commit 323dc60712.
Reason for revert: Possible cause of test instability
Bug: 170513220
Test: soong tests
Change-Id: Iee168e9fbb4210569e6cffcc23e60d111403abb8
Putting t.Parallel() in each test makes them run in parallel.
Additional t.Parallel() could be added to each subtest, although
that requires making a local copy of the loop variable for
table driven tests.
Test: m checkbuild
Change-Id: I5d9869ead441093f4d7c5757f2447385333a95a4
This doesn't apply to compatibility libraries (those added to
conditional class loader context base on the targetSdkVersion in the
manifest), because Soong doesn't know if they are needed or not (the
build rule that parses the manifest runs at Ninja stage).
In the future we may need to relax this and instead of failing the build
to disable dexpreopt in such cases. But currently there are no use cases
that fail.
Also, this patch replaces hardcoded install path with a constant.
Test: lunch aosp_cf_x86_phone-userdebug && m
Bug: 132357300
Change-Id: Ic894bc17e8ffd8ff173111ea09366252001ef3e9
Previously, the patterns in SYSTEM_OTHER_ODEX_FILTER only matched
subpaths of /system. Broaden this to match /<p> as well as /system/<p>.
Because SYSTEM_OTHER_ODEX_FILTER includes system_ext and product apps,
the immediate effect of this is that the odex and vdex files of
apps on those partitions move to system_other for A/B devices.
This makes the product and system_ext partitions smaller, which
in turn makes OTAs smaller.
Bug: 141707536
Test: soong unit tests
Test: (adb shell dumpsys package com.android.stk &&
adb shell dumpsys package com.android.quicksearchbox) | grep -i dexopt -A3;
verify dexpreopt state is 'prebuilt' for both
Test: adb shell find /data/dalvik-cache -name '*QuickSearch*.vdex' | wc -l == 1
Test: adb shell find /data/dalvik-cache -name '*Stk*.vdex' | wc -l == 1
Change-Id: I0cf141014b9ddf32159cff47b0325d9c78b549f2
This doesn't affect the cases with explicitly set `uses_libs` or
`optional_uses_libs`, only the cases when the library implicitly added
to the manifest_fixer by Soong. "org.apache.http.legacy" should be
handled in the same way as "android.test.base", except that they have
been added in different SDK versions.
Test: lunch aosp_cf_x86_phone-userdebug && m
Bug: 132357300
Change-Id: I4fa1f082bfdb67f227f432717731a7e3d790913c
Previously default install path was provided only for comatibility
libraries that are added explicitly via `uses_libs`/`optional_uses_libs`
properties. This didn't take into account compatibility libraries that
are added by Soong when it computes transitive closure of SDK library
dependencies. As a result, install path in such cases remained unknown,
and the corresponding compatibility library was omitted from class
loader context, which caused 'ClassLoaderContext shared library size
mismatch' errors at first boot on device.
Test: lunch aosp_cf_x86_phone-userdebug && m
Bug: 132357300
Change-Id: If661272f46803299c8640f7f5ef161c8217d07e4
Allow default install paths only for compatibility libraries. For other
libraries that are explicitly specified in `uses_libs` and
`optional_uses_libs` unknown install path should be an error.
Bug: 132357300
Test: lunch cf_x86_phone-userdebug && m
Change-Id: I2209c90a939a8aa46c42e13bb42d09c07e4d0895
For some dependencies, like stubs, the SDK library may not be found at
build time (either because the implementation library is not among the
dependencies of the dexpreopted module, or because it's part of a
prebuilt, or because it's missing from the build altogether). In such
cases dexpreopt is useless, because dex2oat does not have access to the
full classpath (unless the &-classpath is used). Therefore do not
dexpreopt in such cases.
Test: lunch aosp_cf_x86_phone-userdebug && m
Bug: 132357300
Change-Id: If289088cfd103011ccb16165e95a97b30fd31b81
Add a new helper SortedIntKeys similar to SortedStringKeys.
Test: lunch aosp_cf_x86_phone-userdebug && m
Change-Id: I08a43ec2cae7d1a82531295aca1a0658e3a0dd6f
Previously only the names were collected, and later used in the
manifest_fixer to add missing <uses-library> entries to the manifest.
Now we also need to collect build-time and on-device paths, to be used
in class loader context for dexpreopt. This commit only collects paths,
but does not pass them to dexpreopt yet.
Test: lunch aosp_cf_x86_phone-userdebug && m
Bug: 132357300
Change-Id: I34b229ee68f16ba215ba03770feadb4d890ec2bf
With the addition of apexes and /system_ext some of the bootclasspath
and system server jars have moved from /system to the new locations.
This has been implemented by using lists of colon-separated strings
called "apex-jar pairs" (although "apex" was misleading as it could
refer to "platform" or "system_ext", not necessarily a real apex).
Using the colon-separated string representation is inconvenient, as it
requires splitting and reassembling the list components many times,
which harms performance and makes error handling difficult. Therefore
this patch refactors the colon-separated lists into a struct that
hides the implementation details.
Test: lunch aosp_cf_x86_phone-userdebug && m
Change-Id: Id248ce639a267076294f4d4d73971da2f2f77208
This allows to reuse SDK version comparison routine from other Python
scripts. With the addition of non-numeric versions comparison has become
more complex, and the deleted shell script did it incorrectly: it used
comparisons like `[[ "S" -lt 28 ]]` which results in "true" as strings
are converted to zero in numeric context. This resulted in adding legacy
libraries to class loader context of apps targeting recent SDK versions.
The error was masked because currently there is only one non-AOSP app
that uses the script (GoogleDialer), and it targets numeric SDK version.
Test: lunch aosp_cf_x86_phone-userdebug && m
Bug: 132357300
Change-Id: I26e752e29b5453fd3e29d5dbfbe4d9df9c0a55b7
There are essentially three different cases: 1) system server dexpreopt,
2) the case when uses-library information is known, and 3) the case when
uses-library information is unknown and the &-classpath hack is used.
This patch reorganizes the code into three branches that correspond to
the above cases.
Test: lunch aosp_cf_x86_phone-userdebug && m
Bug: 132357300
Change-Id: Ife2d01a612e0a608ae1346d7007741498e938bc5
This script belongs with other manifest-related scripts, and the future
plan is to rewrite it in Python and share common functionality with
other scripts.
Test: lunch aosp_cf_x86_phone-userdebug && m
Bug: 132357300
Change-Id: I4b90129e5023ca1a2c818fc160c34b0b7da943ef
Different names of the same field in Make and in Soong resulted in
the field being dropped when unmarshalling the JSON from Make to Soong.
As a result, the list of optional used libraries for Make modules was
always empty.
Test: lunch aosp_cf_x86_phone-userdebug && m
Test: Cherry-pick in internal master and observe that the logcat error
"ClassLoaderContext shared library size mismatch" for GoogleDialer
has disappeared:
terminal-1 $ lunch cf_x86_phone-userdebug && m && launch_cvd
terminal-2 $ adb wait-for-device && adb root \
&& adb logcat | grep 'size mismatch'
(nothing after the change, one error message before the change)
Bug: 132357300
Change-Id: I57820646fa7c1d8af01b2cbc8a3521da450719c0
This is a preliminary CL before fixing on-device paths to DEX jars.
It groups together the inormation about on-host build paths and
on-device install paths to library DEX jars.
This CL changes the structure of module dexpreopt.config files
generated by the build system. Aside of that, no functional changes.
Test: lunch aosp_cf_x86_phone-userdebug && m
Change-Id: I059654be7670f2ba66248d9c49b9694a0591f9c1
The order is non-optimal if some jar X precedes its dependency Y. In
that case dexpreopt will be unable to resolve any rerefences from X to
Y. Raise an error unless the product sets variable
PRODUCT_BROKEN_SUBOPTIMAL_ORDER_OF_SYSTEM_SERVER_JARS to true in the
makefile. This is to prevent regressions in existing products that
currently have correct order.
Test: lunch cf_x86_phone-userdebug && m nothing
Test: lunch aosp_car_arm && m nothing
Bug: 140451054
Change-Id: Iafe8fe0e992deb628e38f2321d4601a4804a3c79
Merged-In: Iafe8fe0e992deb628e38f2321d4601a4804a3c79
(cherry picked from commit fb863c87c4)
Deduplicate code for conditional class loader contexts that depend
on the target SDK version in the manifest.
Test: lunch aosp_cf_phone-userdebug && m
Change-Id: I69d51b212bf502b2659d43f124ea3922f90e1881
This library no longer exists on device and "org.apache.http.legacy"
should be used instead. The error lingered in the code for a while
because the code was not exercised at all. (The only app that sets
EnforceUsesLibraries is GoogleDialer (not in AOSP), and it specifies
"org.apache.http.legacy" explicitly as an optional used library.)
Test: lunch aosp_cf_x86_phone-userdebug && m
Change-Id: I05fa115476315d35a8877fc42bd1c2042f72f2de
The first component is the apex name, or a special name "platform"
if the boot jar is a platform jar rather than a part of some apex.
This is a prerequisite change for moving core-icu4j to a separate
com.android.i18n apex.
Old one-column format is still supported, but all unqualified
components of PRODUCT_BOOT_JARS get "platform:" prepended to them
after reading the product makefiles.
Test: aosp_walleye-userdebug boots
Bug: 138994281
Change-Id: Ic229159fdcdaf6182210a53b63850a389dd786fc
Previously there was a discrepancy between the generated paths for
Soong modules that used "out/soong/system_server_jars" and Make modules
that used "out/system_server_jars". This happened because the default
output directory is $OUT/soong for the normal Soong config and jsut $OUT
for the reduced "null config" created by dexpreopt_gen.
As a result, class loader context for system server jars defined in Make
was referring to nonexistent jars, which caused non-fatal dex2oat errors
(the build was not broken, so the errors remained unnoticed):
Failed to determine oat file name for dex location out/system_server_dexjars/[...]
Could not open dex files from location: out/system_server_dexjars/[...]
Test: aosp_walleye-userdebug boots
Test: cherry-picked in master-arc-dev that has a Make system server jar
arc-services, `lunch lunch cheets_x86-userdebug && m`, check that the
generated dexpreopt.sh for arc-services contains paths starting with
"out/soong/system_server_jars" rather than "out/system_server_jars".
Bug: 140712566
Change-Id: Ia7ea8ac383e32042c31d64971cdc8101ea3068cd
Soong already uses build directory as a part of the generated output
path. Besides, trying to append it second time breaks if the build
directory is an absolute path.
Test: frameworks/rs/build_rs.py (uses absolute build directory path)
Test: walleye-userdebug boots
Bug: 152235239
Change-Id: Ie03c9e688013b9a3e6bc859c936d89c538ded76a
Merged-In: Ie03c9e688013b9a3e6bc859c936d89c538ded76a
(cherry picked from commit f798c3ec32)
The null pointer dereference was caused by trying to get device name
from a config passed to dexpreopt. For Make modules, the config is a
stub that doesn't have a device name. The fix is to use build directory
instead of device name (it is provided both by the full config passed
to Soong modules and by the stub config passed to Make modules).
Test: walleye-userdebug boots.
Test: aosp_bertha_arm-userdebug builds and generates arc-services.odex.
Bug: 152193534
Change-Id: I7adc173646cae6eaee188c6672629a5a942aea06
Merged-In: I7adc173646cae6eaee188c6672629a5a942aea06
(cherry picked from commit 9790f1058b)
