These are just out/ and out/soong/ and the old names were quite
confusing.
Test: Presubmits.
Merged-In: I999ca62162062f27e449f83ffb00fa580d4065b8
Merged-In: I2fcd80a9e376a6842a06aa104a9f6f5c5e16f8c7
Change-Id: Ib481d2aac40df8da1b74174dc8ec576c1cb48be0
The source of truth for what jars are in BOOTCLASSPATH and
SYSTEMSERVERCLASSPATH is make; adding a classpath fragment in soong
with a new jar in the contents without having it declared in make
is wrong (excluding test apexes).
Bug: 191369843
Test: m nothing
Change-Id: Ifd313776ee7ad206031244534ed3870126e4f835
1. Added a new product variable Platform_sdk_version_or_codename;
2. This variable is used to support the logic in the Android.bp file
when either the Platform_sdk_version or the Platform_sdk_codename is
used.
Bug: 195986342
Test: m CtsThemeHostTestCases (the module where the product variable is
used)
Test: TreeHugger
Change-Id: I6b952ce47fd4adc280aa3c7ef4185487558af9bc
Split the x86 host toolchain into glibc and musl variants
Create new musl toolchains that are based on the existing glibc
toolchains, and add the necessary flags for musl compiles.
This relands Ifc02f9e5afa61ff758be98b0c962f3a4b53d0546 with changes
for I46672e3a096b6ea94ff4c10e1c31e8fd010a163c.
Bug: 190084016
Change-Id: Iaa9f7a50ff601155ecd73acc5701a2c226be66dc
Test: TestArchMutator
Create new musl toolchains that are based on the existing glibc
toolchains, and add the necessary flags for musl compiles.
Bug: 190084016
Test: TestArchMutator
Change-Id: Ifc02f9e5afa61ff758be98b0c962f3a4b53d0546
Note that ART apex boot jars and core-icu4j are exceptions here as they
are not part of ApexBootJars. ART apex boot jars are defined in their
own variable, while core-icu4j is treated as a regular non-updatable
boot jar.
Bug: 191127295
Test: atest CtsClasspathsTestCases
Change-Id: I3cea3d82ef521655a1a5ffa8cae2258ab9d08bfc
Replace the android.BuildOs constant with Config.BuildOS so that it
can vary based on the product config.
Bug: 190084016
Test: all Soong tests
Change-Id: Ia67f872d8b2ab788747a22e3a9659dc21c9775cd
Bug: 188179858
Test: compare dexpreopt_config.zip files from
1. TARGET_BUILD_UNBUNDLED_IMAGE=true m dexpreopt_config_zip
2. m dexpreopt_config_zip
(note that m clean should run between steps)
Change-Id: I36a6e8b10b9922cc5522accaf90af1aa05049a86
Previously, copyBootJarsToPredefinedLocations relied on all its
parameters having the same length and the same order. That made it
quite fragile as changes to one of the parameters without corresponding
changes to the other would cause failures. It also combined the
retrieval of the boot dex jars from the modules, handling of missing
boot dex jar files and the generation of the rules to copy the files.
This change separates the retrieval of boot dex jars and handling of
missing files from the copying of those files while at the same time
making the function less fragile by replacing the three ordered
parameters with two maps that shared common keys.
Bug: 179354495
Test: m nothing
Change-Id: Idbcd24a7e8af89f7895a20aeddc58502dcbaad03
To avoid duplicates on *CLASSPATH environ variables at runtime, remove
split entries from platform-*classpath, i.e. all updatable jars that
have their own classpath fragments should not appear in the
platform-*classpath's classpaths.proto config.
Bug: 180105615
Test: m && launch_cvd; atest CtsClasspathsTestCases
Change-Id: Id2759ab8e106cc183e695bf3509a6ab60ab0ef2a
Merged-In: Id2759ab8e106cc183e695bf3509a6ab60ab0ef2a
- Adds all required details for bootclasspath_fragment to implement
classpath_fragment.
- Keeps the actual boot jars in platform-bootclasspath to begin with.
- Makes sure to put the file in apex/etc/classpath on device. Note that
for platform versions of classpath fragment AndroidMkEntries perform
the installation, while for APEXes it must be plumbed via apex.go.
Bug: 180105615
Test: m && launch_cvd; atest CtsClasspathsTestCases
Change-Id: I6101ebdf5b8bcbe95c0b7ce21f3f67a2685aef50
This is unused and doesn't work with our current API review process
anyway (un-drafting an API won't be flagged for API council review).
Test: treehugger
Bug: None
Change-Id: I6d8fcc9885b82dac5ada7772d9e3fb9101524ece
Before this change, exclude paths disabled sanitization of targets that
would otherwise be enabled by SanitizeDevice product variable (aka
SANITIZE_TARGET).
With this change, in addition to the above logic, exclude path disables
sanitization of targets that would otherwise be enabled by the
corresponding include path.
Effectively, this change disables sanitization of targets that are
covered by *both* include and exclude paths.
Test: build/soong/cc/cc_test.go
Bug: b/184976817
Change-Id: I96f1e2a808d88b352b92b7490fa1df5c010314c3
Properly plumb the available environment to the configuration instead of
going through the global variable originalEnv.
Test: Presubmit.
Change-Id: Ia1ea753d5e72c02a0dcaa4c0b43bd6e24fc47cec
This patch adds a variable to indicate to check if the target has the
flag PRODUCT_SET_DEBUGFS_RESTRICTIONS enabled.
Bug: 184381659
Test: make with/without PRODUCT_SET_DEBUGFS_RESTRICTIONS set
Change-Id: Ic14a3759b155ed4e16048d62fcd990f4ba7c906a
This CL adds the support for specifying lists of directories in
build/soong/android/bazel.go, which are then written into
out/soong/bp2build/MANIFEST. Using this configuration,
modules/directories can either default to bp2build_available: true or
false, while still retaining the ability to opt-in or out at the module level.
It also ensures that ConvertWithBp2Build returns true iff the module
type has a registered bp2build converter.
Test: go tests
Test: demo.sh full
Test: TreeHugger presubmits for bp2build and mixed builds.
Change-Id: I0e0f6f4b1b2ec045f2f1c338f7084defc5d23a55
PlatformSepolicyVersion and BoardSepolicyVers haven't assigned correctly
so far. Below is the reason why it hasn't been discovered yet.
DeviceConfig.PlatformSepolicyVersion() was added to support mixed
sepolicy build (setting BOARD_SEPOLICY_VERS and building vendor sepolicy
with old plat policy files). Soong compares PlatformSepolicyVersion()
and BoardSepolicyVers(), and used old vendor sources if both are
different. Back then, the only place where such logic played a role was
selinux contexts. Test codes were running as intended: after setting
BOARD_SEPOLICY_VERS the context files were built against old policies.
But there were two mistakes:
1) PlatformSepolicyVersion() was not added to soong_config.mk, so it was
always empty.
2) BOARD_SEPOLICY_VERS was set to default in system/sepolicy/Android.mk,
which was processed after soong_config. So if BOARD_SEPOLICY_VERS was
not set in BoardConfig.mk, BoardSepolicyVers() was empty, not
PLATFORM_SEPOLICY_VERSION.
And there were no issues as Soong only checked equality.
To fix the issue correctly, this commit adds the variable
PlatformSepolicyVersion, and then handles BoardSepolicyVers correctly by
returning PlatformSepolicyVersion if it's empty.
Test: set BOARD_SEPOLICY_VERS and see vendor_file_contexts changes
Change-Id: Ie55827f47d2903e9739eccacc3874d354d5c9f2d
Remove the references to the android package in remotexec so that
the android package can reference the remoteexec package. This
will allow RuleBuilder to integrate directly with remoteexec.
Bug: 182612695
Test: m checkbuild
Change-Id: I15be5ef126d8aacbd605518638f341daf6f31bb3
This requires linking Blueprint into soong_ui. It lets us avoid the
complicated dance of Ninja files and shell scripts: now the information
as to how soong_build is built is passed directly to Blueprint using a
struct that contains all the information the command line arguments used
to contain.
The ability to run Blueprint from the command line is kept (for now).
Some variables in bootstrap/command.go needed public accessor functions
because soong_build reads them. This will be disentangled by moving the
flag parsing to soong_build.
The presence of the flag definitions in Blueprint means that soong_ui
now also accepts them. This is not a problem in practice because they
are ignored and because soong_ui itself is hidden behind a few layers of
shell scripts.
Test: Presubmits + the new bootstrap_test.sh .
Change-Id: I6dca478f356f56a8aee1e457d71439272351390b
Calling ExistentPathForSource from a PackageVarContext has to fall
back to a less optimal glob dependency implementation that adds the
file to out/soong/build.ninja.d. Checking for "frameworks/base"
adds the directory to build.ninja.d, resulting in any writes to that
directory potentially causing a regeneration. Check for
"frameworks/base/Android.bp", which will already cause a regeneration
if its timestamp changes and therefore not increase regenerations.
Bug: 158342713
Test: m nothing && touch frameworks/base/foo && m nothing
Change-Id: Iac7ac0445dbaa365c90e9a012f1f32020afc6c08
The end goal of this exercise is to remove all mutable global state so
that multiple Blueprint instances can be run in the same process.
Test: Presubmit.
Change-Id: Idb34b0920f2c7d92efb9328ce8a78b7306f89571
This lets us not leak $PATH to soong_build. It was only needed for
Darwin tests anyway.
Test: Will ask jingwen@ who has a Mac.
Change-Id: I4647e41275b323fe6283580f8f92718c6229f23e
The old error message was wrong because this message is emitted
specifically when a non-hermetic tool is not found.
Test: Manual ("m nothing")
Change-Id: I857c1c2bb059aff894e8bd3dd0c09b030c82035d
aosp/1609473 broke this by making originalEnv empty unless
InitEnvironment() is called, which doesn't happen in tests.
Bug: 181835672
Test: "m nothing" on Linux and Darwin.
Change-Id: I33f9cce65a9151e620e1dddafb62d4c599ed2cac
Adds the test fixture support and converts a few tests to exercise the
code and show how it works.
Bug: 181070625
Test: m nothing
Change-Id: I0a2b40fff93b6041f9aa8c4ef0aba91da1bc8bf3
