Internal sdk members are used by an sdk member but not exported by the
sdk. The exported sdk members are those listed explicitly in one of the
sdk member list properties, e.g. java_header_libs.
The prebuilts of an internal sdk member use a unique name so that they
do not clash with the source module. The use of the module internally
is an implementation detail that must not have any effect outside the
snapshot. Having the same name as the source module could cause it to
override the source module, hence why it needs a unique name.
Similarly, they are marked as private so as to prevent their accidental
use from outside the snapshot.
Bug: 142940300
Test: m nothing
Change-Id: Id5364b410be0592f65666afb3e40e9d3f020251c
Moves the struct to android/sdk.go and abstracts it behind a factory
method and interface. That allows it to be used outside the sdk
package.
This change is in preparation for adding support for module types that
have transitive sdk members.
Bug: 142940300
Test: m nothing
Change-Id: I71e5e0adf839b28a3a0952f82637637887f02688
The implicit dependency from an unversioned sdk member to the snapshot
versions should be excluded from visibility enforcement as it provides
no benefit and would require snapshot members to be visible to their
original source modules which would complicate visibility handling.
Also, corrects a spelling mistake in sdkMemberVersionedDepTag.
Bug: 142940300
Test: m nothing
Change-Id: Ib7ea6a3d3904d042dca0ea12f6b9196d40de970b
By default SdkMemberTypes are only supported on module_exports module
type. Support for sdk module type has to be explicitly specified.
The java_header_libs, native_shared_libs and stubs_sources are
supported on sdk. The latter is required to provide the stubs source
for an API specified in java_header_libs as they should be kept in
sync.
Bug: 146341462
Test: m nothing
Change-Id: I19b9e60792780a797458d4a9e489506602b13144
Previously, adding a new SdkMemberType would require adding a new
sdkMemberListProperty instance to the sdkMemberListProperties as well
as adding a new property into the sdkProperties struct. They are
potential sources of conflict and couple the sdk code with all the
packages that add members to it. This change switched to a
registration model that allows each package to register its sdk
member types decoupling them from the sdk code.
Adds an SdkPropertyName() method to SdkMemberType that specifies the
name of the property to use in the sdk/sdk_snapshot. Also provides
an SdkMemberTypeBase struct to be used by providers of SdkMemberType
implementations.
SdkMemberType instances are registered using the
RegisterSdkMemberType() func which sorts the registered instances
by their SdkPropertyName() to ensure the behavior is consistent and
not affected by order of registration.
When creating a new sdk module a dynamicSdkMemberTypes instance is
created that contains the following:
* A properties struct is created dynamically that contains a field for
each registered SdkMemberType, corresponding to that type's
SdkPropertyName().
* A list of sdkMemberListProperty instances is also created, one for
each registered SdkMemberType.
The dynamicSdkMemberTypes instance is cached using a key that uniquely
identifies the set of registered types just in case new types are
registered after one has been created, e.g. by tests.
Bug: 142918168
Test: m checkbuild
Change-Id: I4bf2bf56a2a49025aa41454048bc1e8ccc6baca2
Parameterized the cc.librarySdkMemberType to allow it to support
both static and shared libraries. Created two instances, one for shared
and one for static libraries. A follow up change will add support for
libraries that can be both.
Added *librarySdkMemberType to nativeMemberInfo as information from
there is needed when generating the snapshot.
Made organizeVariants() func a method of *librarySdkMemberType so that
it can initialize the new field. Moved it to be with all the other
methods of that type.
Added host and device tests for the new module type.
Bug: 142918168
Test: m nothing
Change-Id: I00b1e8424b9d81f7d15edc4883971d10668ec2cc
AndroidMkEntries now returns multiple AndroidMkEntires so that a module
can emit multiple Make modules if needed.
Bug: 128708192
Test: m
Change-Id: I56b6f76d22943b80329951c5acb80a1b932441ad
Add a new java_header_libs property that exports header jars (as
java_libs currently does) and switch java_libs to export implementation
jars instead.
Refactors implementation of the existing library sdk member type so
both properties can be supported from common code as they differ only
on the jar being exported.
Bug: 143678475
Test: m nothing
Change-Id: I04642122f72d083bbdfd3290624f957b71ee8875
Grouping in alphabetical order by package and then by name within the
package should minimize conflicts when making changes.
Bug: 143678475
Test: m conscrypt-module-sdk
Change-Id: Ia7dbcd41ce8b8dd8675a90b1b6868fcaeaf72ee4
Extracts the type specific functionality into the SdkMemberType
interface which has to be implemented by each module type that can
be added as a member of the sdk. It provides functionality to add
the required dependencies for the module type, check to see if a
resolved module is the correct instance and build the snapshot.
The latter was previously part of SdkAware but was moved because
it has to be able to process multiple SdkAware variants so delegating
it to a single instance did not make sense.
The custom code for handling each member type specific property,
e.g. java_libs, has been replaced with common code that processes
a list of sdkMemberListProperty struct which associates the
property (name and getter) with the SdkMemberType and a special
DependencyTag which is passed to the SdkMemberType when it has to add
dependencies.
The DependencyTag contains a reference to the appropriate
sdkMemberListProperty which allows the resolved dependencies to be
grouped by type.
Previously, the dependency collection methods would ignore a module if
it was an unsupported type because they did not have a way of
determining which property it was initially listed in. That meant it
was possible to add say a droidstubs module to the java_libs property
(and because they had the same variants) it would work as if it was
added to the stubs_sources property. Or alternatively, a module of an
unsupported type could be added to any property and it would just be
ignored.
However, the DependencyTag provides information about which property
a resolved module was referenced in and so it can detect when the
resolved module is of the wrong type and report an error. That check
identified a bug in one of the tests where the sdk referenced a
java_import module (which is not allowed in an sdk) instead of a
java_library module (which is allowed). That test was fixed as part
of this.
A list of sdkMemberListProperty structs defines the member properties
supported by the sdk and are processed in order to ensure consistent
behaviour.
The resolved dependencies are grouped by type and each group is then
processed in defined order. Within each type dependencies are grouped
by name and encapsulated behind an SdkMember interface which includes
the name and the list of variants.
The Droidstubs and java.Library types can only support one variant and
will fail if given more.
The processing for the native_shared_libs property has been moved into
the cc/library.go file so the sdk package code should now have no type
specific information in it apart from what is if the list of
sdkMemberListProperty structs.
Bug: 143678475
Test: m conscrypt-module-sdk
Change-Id: I10203594d33dbf53441f655aff124f9ab3538d87
It is easier to extract information out of static build rules than it
is out of custom build rules built using the builder as the former
provides access to the in/out and args separate from the rule whereas
the latter only provides access to in/out.
Also, cleans up some warnings that appear in Intellij.
There is a lot of duplication in the testing code. That will be
resolved in a follow up change.
Bug: 143678475
Test: m conscrypt-module-sdk
Change-Id: I973bc0c90b0affd84487f1b222dd3e6c22c07ec0
Adds stubs_sources property to sdk and unzips the droidstubs srcjar
into the snapshot directory.
Adds an UnzipToSnapshot method to the SnapshotBuilder which creates
a rule that uses zip2zip to repackage the supplied zip content into a
temporary zip file that matches what the required snapshot structure.
e.g. if the supplied zip contains foo/Foo.java and that needs to be in
the snapshot directory java/foo/stubs then it will create a zip that
contains java/foo/stubs/foo/Foo.java.
The temporary zip that is the output of that rule is added to the
zipsToMerge field for merging later.
If the zipsToMerge is empty then the snapshot zip is created as
before. Otherwise, a temporary zip file is created. That is then
merged with the other zip files in zipsToMerge to create the final
snapshot zip.
Adds prebuilt_stubs_sources for use by the generated .bp module.
Bug: 143678475
Test: added conscrypt sdk module and attempted to build it
Change-Id: Ie274263af3a08e36a73c61c0dbf0c341fd6967e2
Adds a phony target for each sdk module that builds the snapshot zip.
Test: built an sdk module from command line and checked the zip was created.
Bug: 143678475
Change-Id: I4599332443b8da9adea0a16f00f569ffbd421602
Prepare for making the image mutator available to all modules and
moving it between the os and arch mutators by moving it into the
android package and using an interface implemented by the module
types to control it.
Bug: 142286466
Test: No unexpected changes to out/soong/build.ninja
Change-Id: I0dcc9c7b5ec80edffade340c367f6ae4da34151b
`m module_sdk dist` produces snapshots of all SDKs in the source tree.
A snapshot is a zip file consists of Android.bp, exported headers,
exported AIDL files, stubs for native libs and jars. The zip file is
expected to be downloaded from the build server and extracted to a
directory (which probably will be
/prebuilts/module_sdks/<module_name>/current).
Bug: 138182343
Test: m (sdk_test.go updated)
Change-Id: Idbe4bc24795fe08f26fc1cf7497028f9d162053a
The snapshot script can now handle native shared libs in an SDK.
Bug: 138182343
Test: create following sdk module:
sdk {
name: "mysdk",
native_shared_libs: ["libc", "libdl"],
}
, then execute `m mysdk` and execute the update_prebuilt-1.sh as
prompted. Following directories are generated under the directory where
mysdk is defined at:
1
├── aidl
├── Android.bp
├── arm64
│ ├── include
│ ├── include_gen
│ └── lib
│ ├── libc.so
│ └── libdl.so
├── include
│ └── bionic
│ └── libc
│ └── include
│ ├── alloca.h
│ ├── android
│ │ ├── api-level.h
<omitted>
Change-Id: Ia1dcc5564c1cd17c6ccf441d06d5995af55db9ee
When an APEX is built with uses_sdks, any depedndency from the APEX to
the outside of the APEX should be from the SDKs that the APEX is built
against.
Bug: 138182343
Test: m
Change-Id: I1c2ffe8d28ccf648d928ea59652c2d0070bf10eb
The arch variants are hardcoded in every module type. Refactor
them out into a Target.Variations() method in preparation for
splitting the arch mutator into two, which will require using
different variations.
Test: m checkbuild
Change-Id: I28ef7cd5168095ac888fe77f04e27f9ad81978c0
`m <sdk_name>` generates two scripts each of which is use to update the
current snapshot of the SDK and to freeze ToT as a new version,
respectively. Executing the scripts will copy necessary files (stub
libraries, AIDL files, etc.) along with Android.bp into the ./<apiver>
directory under the directory where the sdk is defined.
This change also introduces a new module type 'sdk_snapshot' that
represents a snapshot of an SDK. It will be auto-generated by the above
scripts, so developers are not expected to write this manually.
The module type 'sdk' is now used to simply specify the list of modules
that an SDK has.
Finally, this change changes the version separator from '#' to '@'
because '#' confuses Make.
Bug: 138182343
Test: m
Change-Id: Ifcbc3a39a2f6ad5b4f4b200ba55a1ce3281498cf
This change introduces a new module type named 'sdk'. It is a logical
group of prebuilt modules that together provide a context (e.g. APIs)
in which Mainline modules (such as APEXes) are built.
A prebuilt module (e.g. java_import) can join an sdk by adding it to the
sdk module as shown below:
sdk {
name: "mysdk#20",
java_libs: ["myjavalib_mysdk_20"],
}
java_import {
name: "myjavalib_mysdk_20",
srcs: ["myjavalib-v20.jar"],
sdk_member_name: "myjavalib",
}
sdk {
name: "mysdk#21",
java_libs: ["myjavalib_mysdk_21"],
}
java_import {
name: "myjavalib_mysdk_21",
srcs: ["myjavalib-v21.jar"],
sdk_member_name: "myjavalib",
}
java_library {
name: "myjavalib",
srcs: ["**/*/*.java"],
}
An APEX can specify the SDK(s) that it wants to build with via the new
'uses_sdks' property.
apex {
name: "myapex",
java_libs: ["libX", "libY"],
uses_sdks: ["mysdk#20"],
}
With this, libX, libY, and their transitive dependencies are all built
with the version 20 of myjavalib (the first java_import module) instead
of the other one (which is for version 21) and java_library having the
same name (which is for ToT).
Bug: 138182343
Test: m (sdk_test.go added)
Change-Id: I7e14c524a7d6a0d9f575fb20822080f39818c01e
