Create a topdown mutator to walk the deps of updatable apexes. If a dep
is lintable, set its strictUpdatabilityLinting to true
Creating a new mutator after apexInfoMutator makes it easy to maintain
an allowlist (e.g. override_apex does not require an entry in the
allowlist, its canonical name can be retrieved using ApexVariationName())
Test: In build/soong/, go test ./apex
Test: TH
Bug: 182349282
Change-Id: I1b390b0e3a8fb20754ce50c6b253d68d2b3f263b
Even though a vendor APEX sets use_vndk_as_stable:true it was possible
to include a VNDK lib by directly depending on it with
native_shared_libs.
But it's contradictory to have a VNDK lib while declaring not to include
VNDK libs. It was missing since pruning dependencies on VNDK libs was
done only for transitive deps.
Added a check to reject this.
Bug: 216847402
Test: m nothing(running soong tests)
Change-Id: I8d79a434b1bfe8e563cf8968fa76830b0e582f66
Bug: 214466457
Bug: 207551677
Test: b build //build/bazel/examples/apex/minimal:build.bazel.examples.apex.minimal
Test: b test //build/bazel/tests/apex:build.bazel.examples.apex.minimal_apex
Test: b test //build/bazel/tests/apex:build.bazel.examples.apex.minimal_capex
Change-Id: I6bf12c1b0c52d4486968bb430a67a3c3110766db
This is needed to allow the Android Go versions of modules
(com.google.android.go.*) to select a different compression toggle than
their non-Go (com.google.android.*) conterparts. go/go-updatability
Bug: 203024418
Test: Preloaded go variants on wembley, booted Android.
Change-Id: Ic96aff5fafb65fbd08e8a69d47c994532e27819e
Merged-In: Ic96aff5fafb65fbd08e8a69d47c994532e27819e
(cherry picked from commit 2c4a96375a)
Discourage jarjaring code where there are alternatives with
better system health implications.
Test: m
Bug: 215233995
Change-Id: I1b076d00e1ad6aa32b41da6bda1033978b5e829d
Currently, the bpf module netd.o (source system/netd/bpf_progs/netd.c)
will be built to /system/etc/bpf/netd.o. In Android T, it will be moved
to mainline module com.android.tethering.
The expected behavior is:
- In T device, it uses the netd.o in mainline module.
- In pre-T devices, it uses the original netd, built from platform.
However, netd.o will be double loaded if the tethering module is
installed in Pre-T devices. Because:
1. bpf in apex is packed into /apex/MAINLINE_MODULE/etc/bpf/
2. bpf in platform is packed into /system/etc/bpf/
3. bpfloader in pre-T loads ANY bpf modules under
/apex/com.android.tethering/etc/bpf/ and /system/etc/bpf/.
We can't change the behavior of bpfloader in pre-T devices. We can't
delete the /system/etc/bpf/netd.o from pre-T devices. Both of them are
not mainline modules. So the mainlined netd.o needs to be packed into a
folder other than /apex/com.android.tethering/etc/bpf/ or
/system/etc/bpf/.
This commit adds a tag 'sub_dir' for bpf module. The installation path
of bpf modules will be:
- /system/etc/bpf/SUB_DIR/ (for platform code)
- /apex/MAINLINE_MODULE/etc/bpf/SUB_DIR/ (for mainline module)
Bug: 202086915
Test: add test in apex_test.go and build
Change-Id: Icc6619768ab006de9f86620a7df1bb2853eaba13
After this change, `bootImageConfig.installDirOnDevice` can be set to a
path outside of the APEX, in which case, the boot image will not be
installed in the APEX. Instead, it will be installed to the given path
by Make.
This is a no-op change. Current behavior is not affected.
Bug: 211973309
Test: m nothing
Test: -
1. m com.android.art
2. See the boot image still being installed in the ART APEX.
Test: -
1. Change `installDirOnDevice` of the ART boot image config to
`system/framework`.
2. See the boot image being installed in `/system/framework/<arch>`.
Change-Id: Ib13b17cc9e94dc5754c9b51b04df3307323b8783
The property is used to customize uid/gid/mode/capabilities of files in
an APEX.
Bug: 209971551
Test: m
Change-Id: I484e46ff819a5266c1e8046dae337e18ef3fefea
Each conversion required defining a separate mutator, which will each
operate on _all_ modules and requires each to repeat checks whether the
mutator should operator. Instead, we introduce a single mutator and
modules can define a ConvertWithBp2build to implement bp2build
conversion for that module.
Test: bp2build.sh
Bug: 183079158
Change-Id: I99d4b51f441c2903879092c5b56313d606d4338d
The ART AOT exemption only applies to Q/R/S, so module jars that have
min_sdk T+ do not need to follow the module package restriction, even if
they are part of a Q/R/S module (but not loaded on Q/R/S).
Relax the restriction to only apply to jars that have min_sdk before T.
Bug: 208773835
Test: m (runs apex tests)
Change-Id: I2c3ad8984ca05ad763bf6162bd478f93ab4ee650
apex.binaries accepts a list of module names, which should be resolved to
their fully qualified labels. Bazel treats string_list and label_list
attributes differently, most notably with the latter adding dependency edges.
Test: apex_conversion_test.go
Bug: 209743852
Change-Id: Iafdc5c728e8658cce0e99d42f32e7bb6fe2f3168
This is configured from Make by setting up Darwin+Arm64 as a HOST_CROSS
target (which is largely true, as binaries can't be executed on X86_64
machines). On the Soong side, it's a bit blurier, as we don't current
have any other users that are the same OS but not natively executable
(Linux/musl is executable, Windows/x86 is a different OS).
Instead of requiring cc_binary/etc to become multi-architecture-aware
and using something like common_first/MultiTarget, this defaults all
non-multi-architecture-aware modules to be built with both
architectures. It then adds a dependency with the
DarwinUniversalVariantTag so that supporting modules can get the outputs
of the other variant.
Cc uses that dependency tag to run lipo on shared libraries and binaries
so that the output of the x86_64 variant is actually a fat binary
including both architectures.
Bug: 203607969
Test: build sdk-repo targets on a Mac
Change-Id: Icbddb0a177c0ba19d3e0d11f8cf568e0d1ea3245
This is to help following refactor for individual modules to have their
own version of checking where needed.
For example, apk in apex may want to enforce it's own version of
CheckMinSdkVersion.
Bug: 205923322
Test: presubmit
Change-Id: Ia2fad6c52af39e21f65385bcb283f1e3adab5548
The new property is used to mimic some of the build behaviors that
currently are applied only when an APEX is `updatable: true`. This
property is helpful to minimize the sudden impact (e.g. change in size)
when an APEX becomes updatable.
Currently, the behavior that this property mimics is the disabling of
the size optimization.
Bug: 207336449
Test: m
Change-Id: I500306afa1221625fda3e89a8d12d5d341791a1f
We will need the profile when we generate the primary boot image on
device.
Bug: 203492478
Test: Run `banchan com.android.art x86_64 && m` and see
`$ANDROID_PRODUCT_OUT/apex/com.android.art/etc/boot-image.prof`.
Test: Run `lunch aosp_cf_x86_64_phone-userdebug && m` and see both
`$ANDROID_PRODUCT_OUT/apex/com.android.art/etc/boot-image.prof` and
`$ANDROID_PRODUCT_OUT/system/etc/boot-image.prof`, in different
sizes.
Test: Start Cuttlefish with the built image and see both
`/apex/com.android.art/etc/boot-image.prof` and
`/system/etc/boot-image.prof` on device.
Change-Id: Id879dc49b234133dfbb9563814328661a1f4a6c0
Vendor APEXes do not formally support updates outside of the main OTA
process. We should clarify this at build time.
Test: set vendor apex to updatable, observe failure
Test: apex_test.go
Change-Id: Ife8d242a42415ebf00d7dced72c07cda1fde1839
Previously, could not set an empty string as a value of an attribute;
however, this is necessary in some cases. To not unnecessarily create an
empty string, use string pointers for attributes rather than strings.
Test: go test bp2build tests
Change-Id: I03b3a3567452d455246d22d81f86c317d06b7c39
The sh_binary module is not supported the vendor variant. So, even if
there is "vendor: true" in sh_binary module, the image variant is
"image:" instead of "image:vendor.Tiramisu".
But the vendor APEX has vendor variant, so vendor APEX module and
sh_binary module have different variants and the sh_binary cannot be
added to vendor apex.
So the Sh_binaries property is added, and the image variant is removed
at DepsMutator.
Bug: 205065320
Test: make -j40 && sh_binary is added to vendor APEX && install check
Change-Id: I30e2d96a73b45e7b06eff24550542cb010008c41
As libsync is NDK/LLNDK, it doesn't need to be aded to allowlist as
apex_available.
Bug: n/a
Test: m
Change-Id: I16cfb258a24bde4def428f1e6277f5d3c95c228c
Move apex module installation rules into Soong by overriding
InstallBypassMake.
Soong installs don't support post install commands, so move the
symlinks into separate rules and add dependencies on them.
This relands If65d283abc86f18ad266da0bf16fe95971a0bf9c with fixes
to install files into $OUT/apex and I606286e971b55d9d1fc4dcd0fbd476962de5fa79
with a fix for reversed logic.
Bug: 204136549
Test: m checkbuild
Change-Id: Ie65c53ebc7911efacdb8e11ba49059448f03c658
Revert submission 1869814-vapex-multi-config
Bug: 206551398
Reason for revert: DroidMonitor-triggered revert due to breakage https://android-build.googleplex.com/builds/tests/view?invocationId=I55600009996329947&testResultId=TR93527797572038984, bug b/206551398
Reverted Changes:
I0cd9d748d:Adds multi_install_skip_symbol_files field (defaul...
I5912a18e3:Demonstrate multi-installed APEXes.
I0e6881e3a:Load persist props before starting apexd.
I932442ade:Adds a new prop context for choosing between multi...
I754ecc3f7:Allow users to choose between multi-installed vend...
Change-Id: If09bf590e3ad93e14fbf89299f80d497c9604a78
Add scripts to generate java APIs used by Mainline modules. This is
aosp/1879177 with fixed build error that caused by dexdeps analyzing
resource only APKs which doesn't contains any .dex files. Now skip the
error generates in that case in gen_java_usedby_apex.sh
Forrest run:https://android-build.googleplex.com/builds/abtd/run/L38900000951898586
Test: TARGET_BUILD_APPS=com.android.adbd m dist apps_only
Change-Id: Id539cbe1b7306ace69c047f95ffc02265a467511
Multi-installed APEXes share the same apex_name and are installed
at the same time.
Should be set to true for all multi-installed APEXes except the singular
default version within the multi-installed group.
Only the default version can install symbol files in $(PRODUCT_OUT}/apex,
or else conflicting build rules may be created.
Bug: 199290365
Test: see https://r.android.com/1872018
Change-Id: I0cd9d748d7be3a2de40ed14f13bad71912457ddc
Move apex module installation rules into Soong by overriding
InstallBypassMake.
Soong installs don't support post install commands, so move the
symlinks into separate rules and add dependencies on them.
Bug: 204136549
Test: m checkbuild
Change-Id: If65d283abc86f18ad266da0bf16fe95971a0bf9c
* changes:
Rename amod variable in AndroidMkEntries.fillInEntries to base
Make HostToolPath, HostJNIToolPath and sboxPathForToolRel use pathForInstall
Add PathForGoBinary
Remove PathForOutput from InstallPathToOnDevicePath
Add PathForGoBinary that uses pathForInstall to return the install
path of a GoBinaryTool. This will replace various places that used
PathForOutput to reconstruct a path to a Go tool, and will support
moving Go tools to the Make install directory outside of the
PathForOutput directory in a future patch.
Bug: 204136549
Test: m checkbuild
Change-Id: I83a3be9f5c621975540f5ed601a0b9e2611c98b9
A new property indicates a CLI tool to sign the APEX contents. The value
is stored in apexkeys.txt so that releasetool (sign_target_files_apks)
can use it to invoke the tool to re-sign the apex contents.
Bug: 193504286
Test: m out/soong/apexkeys.txt
com.android.virt.apex line has sign_tool value
Change-Id: Ifd472049b75b5b87c1ed320f5e1190ff65ed54f2
Since coverage support was added to bootclasspath_fragment in
https://r.android.com/1684807 and bootclasspath_fragments were
integrated into the ART APEX it is no longer necessary to treat ART
APEXes differently to other APEXes.
Change https://r.android.com/1684807 added coverage support, follow
up changes integrated
Bug: 177892522
Test: m droid
m EMMA_INSTRUMENT=true EMMA_INSTRUMENT_FRAMEWORK=true
Change-Id: I4800a003c7459c4686607e16f4c5bde0be105f16
