The RuleBuilder API would not expand Ninja variables because the
variables would be written verbatim to the sandbox manifest file. This
commit allows a rule to specify that the manifest file should be written
in an un-escaped format so that Ninja variables are expanded before
writing the manifest file.
Bug: 286077158
Test: rust sandboxing topic + go test
Change-Id: I1915431f6e24d04d343dacc213c9079674ec8251
Add support to sbox for only writing output files if they are changed
to support enabling restat. Move the clearing of the output directory
into sbox, and when write if changed is enabled delete obsolete output
files without deleting output files that will be replaced.
Enable restat for local metalava rules. Restat for metalava rules
run remotely is still blocked on b/183630617.
Bug: 222095735
Test: TestRuleBuilder_Build
Test: m SystemUI
Change-Id: If8fc47e711f4a6f43947ab69f17cccc8ba6ae61a
Tests were using the same value for OutDir and SoongOutDir, separate
them to allow a test that needs to distinguish between them.
Test: all soong tests
Change-Id: Ibd78758c133a7f07bead3f51b699052676f92fbd
Add RuleBuilderCommand.Validation and RuleBuilderCommand.Validations
that propagate to BuildParams.Validations.
Test: TestRuleBuilder_build, TestRuleBuilder
Change-Id: I9a08bbc073a432fd0b53b87d8948ac0f6afcf637
Order only dependencies that were added to a RuleBuilderCommand were
only propagated to the rule that was created for a missing dependencies
error. Set them on the main rule instead.
Test: TestRuleBuilder_build
Change-Id: I049d1bb921778d18d678439d236f69081927dc70
Deprecated the method to try and prevent any other uses being added.
Bug: 183650682
Test: m nothing
Change-Id: Ia6f43851e5a00c9d96af780e3bd21e03175e1a2f
The lint rule is manually creating a second rsp file because Ninja
only supports on per rule. Move the support into RuleBuilder so
that it can apply the same rewrites that it does to the primary
one.
Test: TestRuleBuilder_Build
Change-Id: Iec250a2d60e74ccf1b4ad085a960fec6867ea559
The current implementation causes inputs listed in an rsp file used with
sbox to be duplicated 3 times in the build.ninja file; once as a
dependency of the rule, once in the rspfile_content field of the rule
with the paths rewritten to be relative to the sandbox, and once in the
rule to write the sbox manifest. When RBE is enabled it also gets a
fourth copy in the list of files to be treated as inputs by rewrapper.
Reduce this to a single copy by using "$in" for the rspfile_content so
that the files only have to be listed in the input dependencies of the
rule, and then add support to sbox to rewrite the rsp file while copying
it into the sandbox, and pass it to rewrapper as well.
Test: m lint-check
Change-Id: I3f46f61119508d39a8bb231c99fc130153fb6f04
Add a test that was dropped in Ic0db961961b186e4ed9b76246881e3f04971825c.
Test: rule_builder_test.go
Change-Id: Idf136919939ad28eb5260dd8d686abe6948f47c7
The methods returns a copy of TestingBuildParams with every usage of a
path that is relative to the temporary test build directory with a path
relative to a notional top. Similar to how PathRelativeToTop does.
Bug: 182885307
Test: m nothing
Change-Id: I6ec20fc52ed76748138f0d48b4df80f765dfcfdc
When RuleBuilder.SandboxInputs() is called configure sbox to copy
all the input files into the sandbox directory and then change the
working directory there when running the command.
Copying input files into the sandbox directory gets tricky when
the input file is the output file from another rule, and could
be at an arbitrary, possibly absolute path based on the value
of OUT_DIR. They will need to be copied to a directory in the
sandbox using the path relative to OUT_DIR.
RSP files need special handling, they need to both be copied into
the sandbox as an input, rewritten to contain paths as seen in the
sandbox, and references to them on the command line need to use
sandbox paths.
Bug: 182612695
Test: rule_builder_test.go
Change-Id: Ic0db961961b186e4ed9b76246881e3f04971825c
Now that rsp files use an explicit path instead of $out.rsp the
unescaped spans and NinjaEscapedCommands() support can be removed
from RuleBuilder.
Bug: 182612695
Test: rule_builder_test.go
Change-Id: I6705151ff0528c59aa1af56ee52c294da15a7a66
Using $out.rsp as the rsp file adds extra complexity around keeping
the $ unescaped. Make callers to FlagWithRspFileInputList provide
an explicit path for the rsp file instead.
Bug: 182612695
Test: rule_builder_test.go
Change-Id: I3f531d80c1efa8a9d09aac0a63790c5b11a9f0c6
This relands I38393900677c5dbe8e72fe06a7dd7d71f3c09f82 after
I8038ed5c6f05c989ac21ec06c4552fb3136b9a7a, which makes the ASAN
variants of libraries have PackagingSpecs so they can be copied
into sandboxed genrules.
Copy tools used by genrules into the sandbox directory. This
ensures correct dependencies on all files used by tools, and
is one step closer to enabling genrules inside unselected
namespaces.
Bug: 124313442
Test: genrule_test.go
Test: rule_builder_test.go
Test: m checkbuild
Change-Id: I57c0d5fc8bba216fac4deb972d0d2098593e8963
Copy tools used by genrules into the sandbox directory. This
ensures correct dependencies on all files used by tools, and
is one step closer to enabling genrules inside unselected
namespaces.
Bug: 124313442
Test: genrule_test.go
Test: rule_builder_test.go
Test: m checkbuild
Change-Id: I38393900677c5dbe8e72fe06a7dd7d71f3c09f82
Enable the RuleBuilder and RuleBuilderCommand methods to access
the BuilderContext by passing it to NewRuleBuilder instead of
RuleBuilder.Build.
Test: genrule_test.go
Test: rule_builder_test.go
Test: m checkbuild
Change-Id: I63e6597e19167393876dc2259d6f521363b7dabc
This relands I3b918a6643cea77199fd39577ef71e34cdeacdb1 with a fix
to create the directory for the output depfile if doesn't exist.
In preparation for more complicated sandboxing that copies tools
and/or inputs into the sandbox directory, make sbox use a textproto
input that describes the commands to be run and the files to copy
in or out of the sandbox.
Bug: 124313442
Test: m checkbuild
Test: rule_builder_test.go
Test: genrule_test.go
Change-Id: I8af00c8c0b25a92f55a5032fcb525715ae8297c2
In preparation for more complicated sandboxing that copies tools
and/or inputs into the sandbox directory, make sbox use a textproto
input that describes the commands to be run and the files to copy
in or out of the sandbox.
Bug: 124313442
Test: m checkbuild
Test: rule_builder_test.go
Test: genrule_test.go
Change-Id: I3b918a6643cea77199fd39577ef71e34cdeacdb1
In preparation for more complicated sandboxing support in sbox, use
a single implementation of the sbox sandboxing by moving genrule to
use RuleBuilder's sbox support instead of creating an sbox rule
directly.
Also move genrule's input list hash support into RuleBuilder.
Test: genrule_test.go
Test: rule_builder_test.go
Change-Id: I292184d02743c7e6887ebbcd232ba565db2ab0cc
Prepare for using Config when adding singletons by passing
Config to NewTestContext and NewContext instead of to ctx.Register.
This will enable a followup change to store SingletonMakeVarsProviders
registered on the Context in the Config, which is necessary to run
multiple tests in parallel without data races.
Test: all soong tests
Change-Id: Id229629a4e42ff4487d317241673837726c075fc
This CL adds symlink_outputs to various locations in Soong that creates
actions that creates symlink outputs, and explicitly mark them as such.
Test: m
Bug: 160568334
Change-Id: I322751bada52a9f49011c74731d84761586e03e7
This reverts commit 323dc60712.
Reason for revert: Possible cause of test instability
Bug: 170513220
Test: soong tests
Change-Id: Iee168e9fbb4210569e6cffcc23e60d111403abb8
Putting t.Parallel() in each test makes them run in parallel.
Additional t.Parallel() could be added to each subtest, although
that requires making a local copy of the loop variable for
table driven tests.
Test: m checkbuild
Change-Id: I5d9869ead441093f4d7c5757f2447385333a95a4
The filesystem object was available through ModuleContext.Fs(), but
gives too much access to the filesystem without enforicing correct
dependencies. In order to support sandboxing the soong_build
process move the filesystem into the Config. The next change will
make it private.
Bug: 146437378
Test: all Soong tests
Change-Id: I5d3ae9108f120fd335b21efd612aefa078378813
Avoid having to pass ModuleFactoryAdaptor to every call to
RegisterModuleType in a test by wrapping RegisterModuleType.
Test: all soong tests
Change-Id: If8847d16487de0479cc3020b728256922b3cadba
sbox will generate a random directory for the output root, and most
tools will encode that directory name in the output target of the
depfile.
So embed the library from dep_fixer into sbox so that it can rewrite the
output filename to a static (reproducible) value. Ninja doesn't care
what that value is, so it's just "outputfile".
Also fix up rule_builder to actually tell sbox about the depfile.
Test: mmma system/iorap; check the contents of:
out/soong/.intermediates/system/iorap/libiorap-binder/android_arm_armv7-a-neon_core_static/gen/aidl/system/iorap/binder/com/google/android/startop/iorap/IIorap.cpp.d
Change-Id: I3640a2e8b0c034f143a35e398a8418a6d621b265
Allow RuleBuilderCommands to use an rspfile with FlagWithRspFileInputList.
This requires being more careful with ninja escaping, as the rspfile
will be $out.rsp, and the value for $out may not be known yet so it
must be inserted as a ninja variable that must not be escaped.
Test: rule_builder_test.go
Change-Id: Ifa91e24a0bb8f0ceeb5c9bfa5689be2a4ff3b9cd
There is no need to create a separate buildDir for each test
file, use TestMain to create a global one for the package.
Test: all soong tests
Change-Id: I435ee7aa88b7e0bb8ccc1ba79f82833a7accf3e9
This essentially allows you to declare that everything in a directory
will be created by the rule, and we'll ensure that your command actually
writes out all of the claimed outputs, and remove any other files that
previously existed in that directory.
Test: built-in tests
Change-Id: I990dce2b3a0d89ebd2736ac1a0cadfb5864c6e73
Allow rules built with RuleBuilder to use depfiles. Ninja only
supports a single depfile with single output. If there are
multiple outputs in a rule, move all but the first to implicit
outputs. If multiple depfiles are specified, use new support
in dep_fixer to combine additional depfiles into the first depfile.
Test: rule_builder_test.go
Change-Id: I7dd4ba7fdf9feaf89b3dd2b7abb0e79006e06018
Add support for TestingModule to return RuleParams for rules created
by the module.
Refactor TestingModule to use helpers, and use the helpers to
implement a similar TestingSingleton.
Use the new functionality to test RuleBuilder's module and singleton
rules.
Test: none
Change-Id: I8348c56ff5086d0c49401f5a00faf7c864e6b6f3
There are no more Make paths being used in Soong now that
dexpreopting and hiddenapi are in Soong. Use the Path types
in the inputs to RuleBuilder, and fix all users of RuleBuilder.
This reapplies I886f803d9a3419a43b2cae412537645f94c5dfbf with
fixes to disable preopt for Soong-only builds when the global
dexpreopt.config doesn't exist.
Test: all soong tests
Test: m checkbuild
Change-Id: I4dae9ecd5de22f062f9478ec8f0747f099cf8190
There are no more Make paths being used in Soong now that
dexpreopting and hiddenapi are in Soong. Use the Path types
in the inputs to RuleBuilder, and fix all users of RuleBuilder.
Test: all soong tests
Test: m checkbuild
Change-Id: I886f803d9a3419a43b2cae412537645f94c5dfbf
Add a RuleBuilderInstalls type for a slice of RuleBuilderInstalls,
and give it a String() method that returns the list of installs
in the format that is convenient for passing to Make.
Test: rule_builder_test.go
Change-Id: I2e9cd9abf4dfb0ad312d0a6662f1567baf9cd222
Temporary marks an output path as a temporary file that is not
necessary after the rule completes, removing it from the result of
Outputs. DeleteTemporaryFiles adds a command to the command line
that deletes all files that have been marked with Temporary.
Test: rule_builder_test.go
Change-Id: Ie509ed800992962747fb287858e148e975eee54a
Add a few convenience methods, document all the methods and add
examples that would show up in the godoc if we were to actually
generate it.
Test: rule_builder_test.go
Change-Id: I270fed605ffec34e6f5b36fde0dc9ca52694b741
Make RuleBuilder.Build take a subset of ModuleContext and
SingletonContext, and dynamically call PathForModuleOut only
if it is available.
Test: rule_builder_test.go
Change-Id: Id825cb75236acf187e9d4a36353a47abcac71927
