Containers generally package the transitive installable
dependencies of their direct dependencies, track them as license
deps.
Bug: 207445310
Test: m checkbuild
Change-Id: Ic8640152cee0e0cfec5e85a1649a8adfd29d517a
* changes:
Fix InstallBypassMake symlink dependencies
Add tests for ctx.InstallFile
Fix OutDir vs SoongOutDir in tests
Fix go vet error
Add missing os.MkdirAll to WriteFileToOutputDir
Use pathtools.WriteFileIfChanged in translateAndroidMk
Call ctx.InstallFile on the primary install file last so that the
primary install file can depend on the extra install files, and so that
the primary install file can be inferred from the last installed file.
Add missing ctx.InstallFile calls for the dexpreopt and hostdex outputs.
Fix the install subdirectory for modules installing to the testcases
directory.
Bug: 204136549
Test: m checkbuild
Change-Id: I7edd7647be27439d3ca0ecc589ca5e89d4ba8474
Move cc module installation rules into Soong by overriding
InstallBypassMake. Update the locations that find host tools
to look in the Make installation directory instead of the Soong
installation directory, which will no longer be used.
The methods that find host tools are also used on go binaries,
so update the config methods that tell Blueprint where to install
go binaries to the Make installation directory too.
Bug: 204136549
Test: m checkbuild
Change-Id: Id172592c195e506102982a4af0084f6d9c68a896
Add PathForGoBinary that uses pathForInstall to return the install
path of a GoBinaryTool. This will replace various places that used
PathForOutput to reconstruct a path to a Go tool, and will support
moving Go tools to the Make install directory outside of the
PathForOutput directory in a future patch.
Bug: 204136549
Test: m checkbuild
Change-Id: I83a3be9f5c621975540f5ed601a0b9e2611c98b9
The next patches will make more InstallPaths use the Make output
directory, which is not inside PathForOutput. Fix the assumption
that the InstallPath is relative to PathForOutput by storing
enough information in the InstallPath to find the on-device path
without PathForOutput.
Bug: 204136549
Test: soong tests
Change-Id: Icb3eeef3f1c72f773f333267f8a7dfc503feacb5
These are: TopFile and GeneratingPrimaryBuilder.
Also re-shuffle the list of flags to make a bit more sense and finish
the rename of BuildDir and NinjaBuildDir to SoongOutDir and OutDir,
respectively.
Test: Presubmits.
Change-Id: I103ff5f09f1c0d16f695a7da5dea13b55028e33e
These are just out/ and out/soong/ and the old names were quite
confusing.
Test: Presubmits.
Merged-In: I999ca62162062f27e449f83ffb00fa580d4065b8
Merged-In: I2fcd80a9e376a6842a06aa104a9f6f5c5e16f8c7
Change-Id: Ib481d2aac40df8da1b74174dc8ec576c1cb48be0
This CL changes the logic in rust/builder.go so that some rustdoc flags
are only applied to external crates. This will allow us to since
warnings and deal with soft-failures in external crates while allowing
us to be more strict with our internal Rust code.
Bug: 195136952
Test: m rustdoc
Change-Id: Icdde304bbbb323cae9657e8f842f58ae79e811ce
Split the x86 host toolchain into glibc and musl variants
Create new musl toolchains that are based on the existing glibc
toolchains, and add the necessary flags for musl compiles.
This relands Ifc02f9e5afa61ff758be98b0c962f3a4b53d0546 with changes
for I46672e3a096b6ea94ff4c10e1c31e8fd010a163c.
Bug: 190084016
Change-Id: Iaa9f7a50ff601155ecd73acc5701a2c226be66dc
Test: TestArchMutator
Create new musl toolchains that are based on the existing glibc
toolchains, and add the necessary flags for musl compiles.
Bug: 190084016
Test: TestArchMutator
Change-Id: Ifc02f9e5afa61ff758be98b0c962f3a4b53d0546
Previously, a module reference in a path property would be parsed into
two parts, the module name and the optional output tag, which defaults
to an empty string if not specified. The output tag would be stored in
a sourceOrOutputDependencyTag which would then be used, along with the
module name to add a dependency on the module.
Later, when the paths were processed the same module reference would be
parsed into the same two parts again and the module name used to find a
matching Module by comparing it against the name returned by either
Module.Name(), ctx.OtherModuleName() or ModuleBase.BaseModuleName().
Once the module had been found then if it supported OutputFilesProducer
then the tag would be passed to its OutputFiles(tag) method. Otherwise,
it would fall back to treating it as SourceFilesProducer.
The problem with that is the module name retrieved from the module in
some way (either directly or through a context name) could be different
to that originally supplied when adding the dependency. e.g.
1. If the original dependency was added onto a source module but there
existed a suitable and preferred prebuilt module then the dependency
onto the source module would have been replaced by the prebuilt
module which has a different name.
2. If the path property included a fully qualified name that included
a qualifying path then it would not match the name retrieved from
the module which would not include the qualifying path.
This change circumvents that whole issue by adding the module name that
was originally used to add the dependency into the DependencyTag. Now
the DependencyTag uniquely identifies the original module/outputTag
pair parsed from the module reference. The pathDepsMutator guarantees
that they are unique as it dedups them before adding the dependencies.
It is possible that calling ExtractSource(s)Deps() would add some
duplicate but if they did they would be identical, i.e. the same
sourceOrOutputDependencyTag would be used to add a dependency onto the
exact same module. In that case it would not matter which of the
dependencies was found as it would still return the same module.
Bug: 193228441
Test: m nothing
Change-Id: I661514a2984818e5c26577411cede53eb57bcd02
PathForModuleSrc calls validatePath in order to convert the supplied
path components into a single path. Unfortunately, that corrupts a
fully qualified module name. So, when given "//namespace:module" it
treats it as a path and replaces "//" with "/". That replacement is
done by a call to filepath.Join().
This change simply concatenates the path components together textually,
using the path separator, to avoid the corruption. That ensures that
a fully qualified module name is preserved and processed properly. If
the path components do not contain a module name then expandOneSrcPath
will call pathForModuleSrc which validates the path so it does not open
up a way to create an invalid path as the validation was unnecessary
anyway.
Bug: 193228441
Test: m nothing
Change-Id: I0bb66feac182b77ce96c8d5d5f17e28ea28d75ba
Previously, modules customized behavior around the handling of
sourceOrOutputDependencyTag by comparing them to android.SourceDepTag
and retrieving the module using something like this:
ctx.GetDirectDepWithTag(m, android.SourceDepTag)
The problem with that is it does not allow an output tag to be
specified and does not handle fully qualified names properly.
This adds the following:
* IsSourceDepTag and IsSourceDepTagWithOutputTag to check whether a
blueprint.DependencyTag is a sourceOrOutputDependencyTag. The latter
also checks that it has the correct output tag.
* GetModuleFromPathDep(ctx, moduleName, outputTag) as a replacement for
ctx.GetDirectDepWithTag(m, android.SourceDepTag).
Replaces usages of:
* t == SourceDepTag with IsSourceDepTagWithOutputTag(t, "")
* ctx.GetDirectDepWithTag(m, android.SourceDepTag) with
GetModuleFromPathDep(ctx, m, "")
It also deprecates the following:
* android.SourcDepTag - as a follow up change needs to modify the
sourceOrOutputDependencyTag will make this useless.
* ExpandSources, ExpandsSources - copies existing deprecated messages
from the implementation to the interface so that they can be seen
by users of that interface.
Bug: 193228441
Test: m nothing
Change-Id: I8c397232b8d7dc1f9702c04ad45ea7819d4631ae
The default partition for RRO is "product/" in Make, but it was
"system/" in Soong. This CL ports the logic from Make to Soong
To implement this, a new function PathForModuleInPartitionInstall is
created that enables callers to provide the relevant partition
Bug: 158407753
Test: from build/soong, ran go test ./java
Change-Id: I05b02eae7fe57189aaad5109c26cccc5823518ef
Appending a Path or Paths to a slice of Paths is simple but appending
an OptionalPath requires conditional logic which makes OptionalPaths
harder to use. This change makes it easy to append the embedded Path,
if any, to a slice of Paths.
Bug: 179354495
Test: m nothing
Change-Id: Ibf80a23043c846162e17c3a98b2590bca653b170
Allow blueprint_go_binary to be used as test data by supporting it in
PathForModuleSrc.
Also make python use GetDirectDepsWithTag instead of VisitDirectDeps
so it doesn't fail on the dependency to a Blueprint (non-Android)
module.
Fixes: 186528269
Test: manual
Change-Id: Ibc1d7caf7bf1fa5db805c3b885a95df4baee0ecf
A module will be installed to /debug_ramdisk if debug_ramdisk is set to
true.
This is a reland of f84e9c05e2, with a fix
that removes /first_stage_ramdisk.
Bug: 184004542
Test: soong test
Change-Id: I739de63cfec6b0fec5a90f7c4741fc4d884d209c
This reverts commit f84e9c05e2.
Because this breaks the usage of boot-debug.img and
vendor_boot-debug.img
Bug: 185970130
Bug: 185990198
Test: make bootimage_debug
Change-Id: I7886c971982faae1d5bc34688643de8d94d6e201
A module will be installed to debug_ramdisk (or
debug_ramdisk/first_stage_ramdisk if recovery as boot is true) if
debug_ramdisk is set to true.
Bug: 184004542
Test: soong test
Change-Id: Ic5a4d27407e506fffa462de2149e0785f11b2ac7
This allows the following cc_library_static targets to build with bp2build:
- libc_freebsd
- libc_freebsd_large_stack
- libc_openbsd_ndk
- libc_gdtoa (* but still fails for mixed builds)
- libc_aeabi
- libc_static_dispatch
- libc_dynamic_dispatch
This also allows a number of other cc_library_static targets to progress further in their builds.
Test: Added unit test
Test: bp2build-sync.py write; bazel build //bionic/...
Change-Id: I71742565c16594448a41a6428a5c993171ec4cb4
Follow I2159cc9d85f388073198eac7456e5bf43e813096 that makes Glob
return a GlobResult.
Bug: 159845846
Test: glob_test.go
Change-Id: Ia771bdbdf1eb668623c4b3f00bf65e0e1e3a55c0
This CL contains the converter for libdl_android, a cc_library that
expands into a cc_shared_library and a regular cc_library.
Test: TH
Test: bp2build; bazel test //build/bazel/tests/...
Change-Id: If70641a538211b0d6b2aac0e4d0d06912318304d
Makes Path.RelativeToTop the source of truth as to what `relative to
top` means.
Uses it in PathRelativeToTop so that it will be tested by the existing
tests that use AssertPathRelativeToTop.
Also adds RelativeToTop() to WritablePaths and Paths.
Bug: 183650682
Test: m droid
Change-Id: I88dc56afd1314e51b4e41795a2448cab4ce8a899
First, the buildDir() method was renamed to getBuildDir() to avoid
clashing with the buildDir field.
Then, a buildDir was added to both `OutputPath` and `InstallPath` but
not to `PhonyPath` as it does not contain any path components. Instead
the `PhonyPath.getBuildDir()` was changed to simply return "".
Bug: 183650682
Test: m droid
Change-Id: I12e1854c829b980c5c01205753c62c00dc0a4774
This CL adds the support for specifying lists of directories in
build/soong/android/bazel.go, which are then written into
out/soong/bp2build/MANIFEST. Using this configuration,
modules/directories can either default to bp2build_available: true or
false, while still retaining the ability to opt-in or out at the module level.
It also ensures that ConvertWithBp2Build returns true iff the module
type has a registered bp2build converter.
Test: go tests
Test: demo.sh full
Test: TreeHugger presubmits for bp2build and mixed builds.
Change-Id: I0e0f6f4b1b2ec045f2f1c338f7084defc5d23a55
If a genrule depends on a module that is disabled, in this case because
it is a device module in a host-only build, it can cause panics when
getPathsFromModuleDep retrieves a nil Path from the disabled module.
Treat disabled modules as missing dependencies.
Test: TestGenruleAllowMissingDependencies
Change-Id: I3c689c6b5505b21eaf7ae7cb93c00f96f438ac17
modules converted with bp2build_available are will also be available to
be used in mixed builds.
Test: build/bazel/scripts/milestone-2/demo.sh full
Test: go tests
Change-Id: I49f16ec3ba5bb11dfed8066af069c27eb04371fb
