Add a ctx parameter to AndroidMkExtraEntriesFunc to allow them to
access providers.
Test: m checkbuild
Change-Id: Id6becc1e425c3c3d8519248f8c0ce80777fac7cc
Merged-In: Id6becc1e425c3c3d8519248f8c0ce80777fac7cc
Previously in order to make use of dist entries with tag properties it
was necessary for each module type to be modified to store the results
of GenerateTaggedDistFiles(module) in the AndroidMkEntry.DistFiles
property. This change generalizes that mechanism to work across all
module types.
This change does improve the behavior of a couple of tests where
previously a dist with tag property was ignored because tagged dist
files were not available now it is used correctly.
Some module types do not implement OutputFileProducer interface and so
they cannot handle dist with tag properties. This change makes it an
error to attempt to do that. That necessitated adding OutputFiles(tag)
method to customModule in queryview_test.go as some of the tests in
that file used dist entries with tag properties.
Follow up changes will remove the code that was made redundant by this.
Test: m nothing
m dist sdk - before and after this change, compare result to
make sure that there are no significant differences.
Bug: 174226317
Change-Id: Ifc54d67db10ce0d0fe8179c05b97a2be2113be4e
Change https://r.android.com/1335521 added tag property to the Dist
struct so that it could be used to select one of a number of different
output files to copy to the dist instead of the single file that the
module type made available for dist. The output files were selected
by passing the tag to OutputFiles(tag).
Module types that wanted to support this new approach had to explicitly
set AndroidMkEntries.DistFiles = GenerateTaggedDistFiles(module).
Unfortunately, doing that had a side effect of changing the behavior of
dist entries without a tag.
That was because the change treated a tag that was not specified, as
being the same as "". So, prior to the change no tag meant use the
default dist file but after it meant use the paths returned by
OutputFiles(""). That changed the behavior of the java.Library type
which affected the behavior of the android_app module type.
Prior to the change the java_library would make the
Library.outputFile available for dist when no tag was specified. After
that change it would make Library.outputFile plus
Library.extraOutputFiles. The latter is usually empty except for
android_app which adds some extra files into there which will now be
copied to the dist. That change may have been intentional but there
was no mention of it in the change or the bug. Even if it wasn't
intentional it may still be beneficial.
Any module type that wants to add support for tags in dist runs the
risk of introducing similar changes in behavior. This change
differentiates between the tag not being set and the tag being set to
"" to avoid that possibility and to make the default behavior
explicit for those module types that have switched.
It does so as follows:
* Adds a DefaultDistTag constant that is used when the tag is not set.
It is a string that is unlikely to be used as an actual tag as it
does not start with a . and uses some special characters.
* The DefaultDistTag is used in MakeDefaultDistFiles(paths) to indicate
that the supplied paths are the default ones and and also in
GenerateTaggedDistFiles() for Dist structures that have no tag
property set.
* The DefaultDistTag is passed to OutputFiles(tag) just in case the
module type has explicitly defined the paths to associate with that
tag in there. If it has then it overrides the legacy behavior. If it
has not then it is just ignored and falls back to using the previous
behavior.
* The java.Library.OutputFiles(tag) method explicitly handles the
DefaultDistTag and returns Library.outputFile for it which restores
the behavior from before the change that added dist.tag support.
* Similar change was made to apexBundle.OutputFiles(tag) in order to
preserve its previous behaviour.
* The customModule used by TestGetDistContributions has been modified
to also preserve its previous behavior after this change.
Test: m nothing
m dist sdk - before and after this change, compare result to
make sure that there are no significant differences.
Test the effect on the apex by following instructions in
http://b/172951145
Bug: 174226317
Change-Id: Ib8f0d9307751cc2ed34e3d9a5538d3c144666f6d
This change adds some additional tests to cover the different
combinations of setting OutputFile and DistFiles properties in the
AndroidMkEntry.
These tests will prevent follow up changes from inadvertently changing
the behavior that some modules rely on.
Test: m nothing
Bug: 174226317
Change-Id: I6ab6f2711a5fa416ea2b84a1e0b8754d525d7a0c
A previous change duplicated the test cases from TestGetDistForGoals()
to test the getDistContributions() method. This change removes the
duplicate tests and leaves a single test to verify that
GetDistForGoals() uses getDistContributions() and
generateDistContributionsForMake() correctly.
Test: m nothing
Bug: 174226317
Change-Id: I545501016b932f9af0d5fda2f452a3a09932d3fb
Previously, the GetDistForGoals(Module) func combined the processing
of the dist properties with generating the make specific rules for
generating that dist. That has a couple of problems:
1. It combines two pieces of functionality into one method which is
bad practice.
2. It makes it hard to test because the make specific output ends up
containing absolute paths to temporary directories created by the
test.
3. It makes switching to a non-make output difficult and fragile as
changing the output will also require changing the tests.
This change adds an intermediate data structure to contain the result
of the dist processing. That processing is done by the new method
getDistContributions(Module) which returns the new intermediate
structure. It also adds generateDistContributionsForMake(..) to
generate the make output. The GetDistForGoals(Module) func uses them to
implement the previous behavior.
It adds identical tests to those in TestGetDistForGoals() but leaves
those tests alone to show that this refactoring does not change the
behavior. Follow up changes will clean up TestGetDistForGoals(). It
also adds a test for generateDistContributionsForMake(..).
Bug: 174226317
Test: m nothing
m dist sdk - before and after this change, compare result to
make sure that there are no significant differences.
Change-Id: I458b7c8e4485bf66d3498f50df85a8d65fc2ee00
Previously, TestGetDistForGoals tested multiple test cases within a
single test so when it failed it was difficult to determine which test
case was the cause. This change runs each test case as its own
nested test.
It also corrects the order of expectedLine and line format parameters
to match the order in the message.
Test: m nothing
Bug: 174226317
Change-Id: I1408ec4125afc5c0b392cd7643dd3f630fe468e5
Prepare for using Config when adding singletons by passing
Config to NewTestContext and NewContext instead of to ctx.Register.
This will enable a followup change to store SingletonMakeVarsProviders
registered on the Context in the Config, which is necessary to run
multiple tests in parallel without data races.
Test: all soong tests
Change-Id: Id229629a4e42ff4487d317241673837726c075fc
This reverts commit 323dc60712.
Reason for revert: Possible cause of test instability
Bug: 170513220
Test: soong tests
Change-Id: Iee168e9fbb4210569e6cffcc23e60d111403abb8
Putting t.Parallel() in each test makes them run in parallel.
Additional t.Parallel() could be added to each subtest, although
that requires making a local copy of the loop variable for
table driven tests.
Test: m checkbuild
Change-Id: I5d9869ead441093f4d7c5757f2447385333a95a4
While AndroidMkEntries' DistFiles were populated from java_library
properly, there was a bug in the conditionals that dropped the tagged
DistFiles.
Fixes b/152834186
Fixes b/161339864
Test: soong tests, m sdk dist (creates out/dist/test.jar with
aosp/1363578)
Signed-off-by: Jingwen Chen <jingwen@google.com>
Change-Id: Id895282256fd367b2f46dcb7a643465fa66c9456
This CL adds "dists" to the base property struct to support multiple
dist file configurations, and generic tag support to dist tagged outputs
of modules.
Fixes: b/152834186
Test: soong tests and `m sdk dist`
Change-Id: I80c86bc9b7b09e671f640a4480c45d438bdd9a2a
Signed-off-by: Jingwen Chen <jingwen@google.com>
The filesystem object was available through ModuleContext.Fs(), but
gives too much access to the filesystem without enforicing correct
dependencies. In order to support sandboxing the soong_build
process move the filesystem into the Config. The next change will
make it private.
Bug: 146437378
Test: all Soong tests
Change-Id: I5d3ae9108f120fd335b21efd612aefa078378813
Avoid having to pass ModuleFactoryAdaptor to every call to
RegisterModuleType in a test by wrapping RegisterModuleType.
Test: all soong tests
Change-Id: If8847d16487de0479cc3020b728256922b3cadba
java.Module is using "Custom" function to write Android.mk.
And if "hostdex" is set to "true", it writes "hostdex" module definition
as well as original module.
As of now, Required/Host_required/Target_required props are filled in
the AndroidMkEntries structure(aosp/939505). But these are not
passed to old AndroidMkData.Custom function.
So, if a java_library declares "hostdex:true" and "required:[...]"
together, "required" is not applied to the "hostdex" variant.
This change copies *Required props from AndroidMkEntries to
AndroidMkData before calling its Custom callback.
Test: m (runs soong unit tests)
Change-Id: I5f85714f721a2a0917ab18072dbea52294c770e7
