Vendor snapshot can be captured with "m dist vendor-snapshot". With
vendor snapshot and vndk snapshot, older version of /vendor and newer
version of /system will be able to be built together by setting
BOARD_VNDK_VERSION to past vendor's version.
Only vendor modules under AOSP are to be captured. In detail, modules
under following directories are ignored:
- device/
- vendor/
- hardware/, except for interfaces/, libhardware/, libhardware_legacy/,
and ril/
Test modules (cc_test, etc.) and sanitized modules are also ignored.
Bug: 65377115
Test: m dist vendor-snapshot
Change-Id: If7a2f6de7f36deee936930c0ccf7c47c4a0cebf6
This is the 1st part of the CL. It adds support to enable compilation
of line coverage instrumented binaries. For more details please refer
to the design doc: go/android-line-coverage-doc
Bug: b/147604881
Test: Code works successfully on Taimen devices
Change-Id: I07745c1438b611041ed032dd4b7788cb50130845
Moves the struct to android/sdk.go and abstracts it behind a factory
method and interface. That allows it to be used outside the sdk
package.
This change is in preparation for adding support for module types that
have transitive sdk members.
Bug: 142940300
Test: m nothing
Change-Id: I71e5e0adf839b28a3a0952f82637637887f02688
This is preparation for enhancing the versioning tranformer to support
applying per property transformations. Specifically, to allow
properties to reference other libraries within the sdk.
Bug: 142940300
Test: m nothing
Change-Id: I99cdff4b407763ed395ff358d8110a63c6cf5589
In an AOSP aosp_blueline-userdebub build, OutputPath.String was
allocating 802MB of strings in filepath.Join to prepend the
out dir to each path. Allocate the joined string in PathForOutput
instead, which results in ~57MB of new allocations in PathForOutput
but no allocations in OutputPath.String.
Test: all soong tests
Change-Id: Id452e0c46a2aeda71bfac11a227bb6edb8e3523d
This is to support enabling scudo only for non-svelte configs.
Also, add exclude_static_libs to allow removing the jemalloc libs.
Bug: 137795072
Test: Verified that a svelte and non-svelte config can use this method
Test: to properly choose between scudo and jemalloc.
Change-Id: Iec6bfe159f8491138e93dde1d225a8c874c7ce31
This CL adds RBE support to javac, r8, and d8 rules which is only
enabled if respective environment variables are set.
Test: an aosp_crosshatch build with and without the new variables.
Change-Id: Ic82f3627944f6a5ee7b9f3228170c2709b1bfcb8
The value format that sdk_version (and min_sdk_version, etc.) can have
has consistently evolved and is quite complicated. Furthermore, with the
Mainline module effort, we are expected to have more sdk_versions like
'module-app-current', 'module-lib-current', etc.
The goal of this change is to abstract the various sdk versions, which
are currently represented in string and is parsed in various places,
into a type called sdkSpec, so that adding new sdk veresions becomes
easier than before.
The sdk_version string is now parsed in only one place 'SdkSpecFrom', in
which it is converted into the sdkSpec struct. The struct type provides
several methods that again converts sdkSpec into context-specific
information such as the effective version number, etc.
Bug: 146757305
Bug: 147879031
Test: m
Change-Id: I252f3706544f00ea71c61c23460f07561dd28ab0
Create a highmem pool based on the total RAM and the number of CPUs,
with an override via the NINJA_HIGHMEM_NUM_JOBS variable. Put
metalava into the highmem pool.
Ninja does not support nested pools, and when goma or RBE is enabled
the maximum ninja parallelism is set very high with local jobs in a
local pool. When both the local pool and highmem pool are enabled,
the total number of local jobs will be as high as the sum of the sizes
of the two pools. Keep the highmem pool limited to 1/16th of the
local pool when remote builds are enabled to try to minimize the
effect while still limiting highmem jobs.
Fixes: 142644983
Test: m nothing, examine pools
Test: m USE_GOMA=true nothing, examine pools
Change-Id: Id79f11f44948992960ac34ecf831dacbe21bd332
* changes:
Pass desired size proptools.FilterPropertyStructSharded
Do a better job removing tags from arch structs
Split the runtime arch property structs into 3
proptools.FilterPropertyStructSharded now takes a desired max size
of the name.
Fixes: 146234651
Test: all soong tests
Change-Id: Ifa10039e5f55a5d0f4a35172983d43f33af88e93
Remove more android struct tags from runtime created arch structs
to reduce the size of their names, which hit the 64kB limit in
runtime.StructOf if they are too long.
Bug: 146234651
Test: m checkbuild
Change-Id: I6362765275b93c8932eb0b1abbcb4be47031d9b1
Install to recovery/root/first_stage_ramdisk if BOARD_USES_RECOVERY_AS_BOOT,
otherwise ramdisk. In addition, append /system if not InstallInRoot().
Test: pass
Bug: 147347110
Change-Id: Ie5895ac61a3d5d85f5d958a27c7980d6c79d997e
Instead of creating a runtime generated struct type:
struct {
Arch struct {
Arm struct {
Armv7-a struct {
...
}
}
...
}
Multilib struct {
Lib32 struct {
...
}
...
}
Target struct {
Android struct {
...
}
...
}
}
Replace it with a top-level struct of empty interfaces:
type archPropRoot struct {
Arch, Multilib, Target interface{}
}
And then embed nil pointers to smaller structs inside it:
struct {
Arm struct {
Armv7-a struct {
...
}
}
...
}
This reduces the maximum number of times the archecture specific
properties are embedded in a runtime generated struct from 139
to 97, which makes it easier to avoid hitting the runtime generated
struct name size limit of 64kB.
Bug: 146234651
Test: all soong tests
Change-Id: I901c434ac9a1d99c74fc2370c5e6803b3682dc73
This is for use to add dependencies between specific module variants,
without getting the dependencies potentially duplicated as more
variants are created.
Moved genrule tool dependency registration to this phase, to avoid
potential splitting of its dependencies, and for consistency with the
same kind of dependency on dex2oat in https://r.android.com/1205730.
Test: m nothing
Bug: 145934348
Change-Id: I1f9e75354e359cef5f41d14e5016b0a67d7655d7
AAPT2 ignores assets in overlay resource inputs, so separate rules are
required to extract and merge assets from dependencies.
Test: app_test.go
Test: Added assets to Settings-core for testing
Test: Confirmed Settings.apk contains them with this change.
Fixes: 146655310
Change-Id: Iab8bc61b719541dae64f0e3502bc9cb45a353687
Now that ninja uses lstat so that we can get the mtime of the symlink
itself, it's safe to use a real input here rather than an order only
input. This matches how our other install rules work for host files.
Symlinks should be quick to recreate, so I'm not copying the logic to do
order-only dependencies for the device.
Bug: 128577186
Bug: 145278193
Bug: 135515543
Test: m out/target/product/walleye/apex/com.android.art.debug/javalib/arm/boot.art
rm out/soong/host/linux-x86/bin/dex2oatd64
m out/target/product/walleye/apex/com.android.art.debug/javalib/arm/boot.art
Change-Id: Ief5ec752ce0d0216aeecd8e904afc59f3f08ed7d
This means everything that goes into apexes need to be
explicitly labeled to be available for apex.
Whitelist the current offenders. This list should be
trimmed down.
Bug: 147364041
Test: m
Test: multiproduct_kati -only-soong
Exempt-From-Owner-Approval: cherry-pick from internal
Change-Id: I837299c6a15d46f8a5ba544b613776b1cc27d7b8
Merged-In: I837299c6a15d46f8a5ba544b613776b1cc27d7b8
(cherry picked from commit 93488cbb10d4882845abb732f8e53714f0982031)
When both prebuilt and source versions of a module are present in the
build an implicit dependency is added from source -> prebuilt. This
change excludes that dependency from visibility enforcement as it
provides no value and would otherwise require an sdk snapshot to
rewrite the visibility of the generated prebuilt modules which would
be complicated.
The rewriting would include:
* Detecting //visibility:public and just passing that straight through.
* Detecting //visibility:private and replacing that with the location
of the source.
* Otherwise, adding the location of the source to the visibility
property.
This adds a general mechanism to allow any dependency to be excluded
from visibility enforcement by simply using a tag that implements
the ExcludeFromVisibilityEnforcementTag interface.
Bug: 142940300
Test: m nothing
Change-Id: I0668ff5aa798152d17faf3aac1bb8eff8d6350c3
Some pre arch mutators are hard coded into mutator.go and so could not
share code for registering those mutators between tests and runtime.
This change adds a new HardCodedPreArchMutators(RegisterMutatorFunc)
method to RegistrationContext which allows hard coded mutators to be
registered alongside other build components during init() and testing.
The method is treated as a noop on the InitRegistrationContext and
behaves just like the PreArchMutators(RegisterMutatorFunc) method on
the TestingContext.
Bug: 146540677
Test: m nothing
Change-Id: I6f8b1e2d54d9dc4e86f951ced61d1ee7b0fe4b2e
This relands I12a0f907753fefd1997ab8b4ea2ac331234093cf along with
a fix to blueprint for absolute paths.
Store the current working directory and then change to the root
directory so that all file accesses must go through helpers in
the android package that properly track dependencies.
Change-Id: I24ac485677aa102eec1a2521d16820da6ee1ae77
Fixes: 146437378
Test: m checkbuild
Test: m OUT_DIR=/tmp/out nothing
