This reverts commit b018b83664.
Reason for revert: Builds will start failing now since the gcert change is about to go in.
Change-Id: I81d36ce6bf4f7a9bc120b34d411f2cb4ec64e5eb
This required the following:
- Adding Platform_base_sdk_extension_version to default soong.variables
- Teaching the symlink tree creation code to understand symlinks
- Making finder.go follow symlinks when requested
Adding yet another knob is unfortunate, but I can't allow that
unconditionally because the Android code base contains a number of
symlinks giving rise to infinite directory trees because they point back
to their parent and this seemed preferable to adding complicated logic
like "follow symlink but if only its fully resolved version does not
point under the source tree".
I could be convinced about the latter, though.
Test: Presubmits.
Change-Id: I453f6b7e5334771f5832c700db00f9d24ed1d82f
Now that we are ready to rollout gcert, adding a warning that builds
will fail if gcert doesn't exist. Doing this only for builds with
ANDROID_BUILD_ENVIRONMENT_CONFIG=googler.
Test: Ran a build without gcert and USE_RBE=true and it printed the
warning.
Bug: b/229743321
Change-Id: I616a4a534ab277873ac7e19baecb78620f07854c
These can take a minute or more of build time, and currently hold up
other processing. We could move to a parallel compression scheme to
speed them up, but it's simpler just to background them and continue the
build, waiting to make sure they've finished before exiting.
Testing this on git_master/flame-userdebug:
This brings a local no-op `m nothing dist` build from 2m1s to 1m39s,
even though most of that time is still spent waiting on these (since
there is very little else happening in a `nothing` build when Soong and
Kati don't need to run).
Running `touch art/Android.mk; m nothing dist` (so the above, but with
Kati) goes from 3m39s to 2m2s. We spent 9 seconds at the end waiting for
these to finish.
CI cases that almost always run Kati plus some number of other actions
are likely to completely hide the time taken to dist these files.
Bug: 229932999
Test: Check $DIST_DIR, files still exist
Change-Id: I1fb78d7c4d5103d72b5d71d9277dea0d452f8968
If we didn't need to run soong_build during the current run, we still
try to load the soong metrics. But in the case of `dist`, that's in a
directory that is not guaranteed to persist between runs.
Make loading the soong metrics optional if the file does not exist. Also
fixes a variable shadowing issue that meant we never passed it into
ctx.Metrics.
Test: treehugger
Change-Id: Ic836282f4d13e91daa0e7241ad7c488de3293d8b
This allows us to track how much time is spent in Clang.
Test: TOOLCHAIN_RUSAGE_OUTPUT=/tmp/rusage.txt m
Change-Id: Ib2961904f363bc59bd9d928bb055a96740cb9f17
Tracks the time to call the expconfigfetcher and whether it updated the
config file or not.
Test:
Ran a build with a "regular" user and verified the metrics indicated
NO_CONFIG and no config file was created.
Ran a build with an "experiment" user and verified the metrics indicated
CONFIG and a googler.json config file was created.
Bug: http://b/227186589
Change-Id: I030e9497c369459ae98c0c4f7765aef6de4c601f
Currently, mk2rbc/rbcrun aren't built in certain phases
of the build, which causes the Starlark product configuration
to fail when using get_build_var if a regular build hasn't
been run before.
Bug: 226677850
Test: Manually
Change-Id: If85608eef63be25fddc4d916c82247c13eb0195f
Metrics are added to a materialized protobuf soong_build_metrics.pb
Recorded events have scoped names and recorded runtimes.
For example, mixedbuilds includes the following events:
mixedbuilds.prepare
mixedbuilds.analyze.write_files
mixedbuild (this is a total of all mixedbuild events)
Test: Manually verified materialized protos for mixedbuild, bp2build,
and legacy build.
Change-Id: I2e72d4502c0373bee0279bb1320b2e4dd586129c
Dumping of RBE metrics should only happen when reproxy was started.
Reproxy is started only when Soong is run in make / build mode and not
in dumpvars mode.
Doc: https://docs.google.com/document/d/1Iqhu5QgozB_rA9fucMHO6X4U6A8e8qFtZyub9j83ICQ/edit#
Test: Ran a build with / without RBE. No metrics dumped during lunch
without RBE and metrics dumping worked as expected with RBE.
Bug: b/197213143
Change-Id: Ic3403331e1f4ac2c7c72fd9169aa7b82a7545c75
This is to ensure that we don't default to using
application_default_creds when it is not set and rather
"RBE_use_google_prod_creds" variable is set. This is necessary to
rollout RBE gcert auth.
Bug: b/224446621
Change-Id: I51e3f1aefadf282240b8f861efafde6b9b61d305
Use EXPERIMENTAL_USE_OPENJDK17_TOOLCHAIN=true to build with OpenJDK 17
while still targeting java language version 11.
Bug: 219098645
Test: m EXPERIMENTAL_USE_OPENJDK17_TOOLCHAIN=true
Change-Id: I89fb04ecde4dbd1e102098f316692624dd67f8a2
Combined with roboleaf CI changes to pass this flag and subsequent
pipeline changes, this will allow basic mkfile metrics to be
dashboarded, which will help track mk2bp progress.
Bug: 217764943
Test: manual; verified mk_metrics.pb is generated iff --mk-metrics is
specified, used printproto on result
Change-Id: I348994b4d7e3479d0dc04de0276b94a702aac95b
To support using google prod credentials for Google developers, we need
to be able to make an RPC call to exchange credentials. This RPC call
needs to be issued via stubby and hence allowlisting the stubby binary.
dwillemsen@ also pointed out that this should be less effective for
other tools running within the build since network access is disabled
for the other tools anyway via sandboxing.
Bug: b/222484146
Change-Id: I29aec9576e86b9ed3051df7943404abd478c549b
Having soong generate a list of makefiles for mk2rbc
to look through is much faster than having mk2rbc search
itself. Profiling the readLinesFromeFile() function that
reads the list of makefiles shows it takes on the order
of 200 microseconds, much faster than the ~5 seconds
it takes for mk2rbc to search the tree itself.
This CL also allows include statements that are prefixed
with a variable. The concern with this was that there
would be a lot of load statemnts emitted for generic
include statements, causing the generated code to look
ugly, and converting and loading all those files could
cause performance issues. On the performance issues
front, there's already a check that it doesn't result
in over 150 potentially included files. We can lower
that number if necessary, but it's probably good for now.
On the generated code front, while it's true that it's
ugly, it's better to have working but ugly generated
code than refusing to generate anything working at all.
To ensure the soong finder step isn't slowed down due
to having to find a bunch of new makefiles, I profiled
the combination of newSourceFinder and FindSources in main.go:
Baseline incremental:
338.011634ms
340.853335ms
348.541762ms
333.229644ms
349.124824ms
Baseline clean:
1.003836419s
1.006203912s
996.193648ms
1.031005604s
1.03691152s
Modified incremental:
349.029285ms
349.264496ms
351.774948ms
337.63187ms
359.425306ms
Modified clean:
1.028238704s
1.053103506s
1.032757506s
1.016631201s
1.04288108s
So we can see the times are barely affected by this change.
Fixes: 213508006
Test: go test
Change-Id: Iab18bfb127ba3b7e63f2c01f69064805a8398764
CI builds are doing m installclean between them;
which is not causing the system_dlkm to clean
it's build.prop and it is stuck to the first CI
build when feature landed causing ota signing
test to fail.
Local reproduction using:
m installclean && m -j96 && m dist
validate_target_files out/dist/*target_files-*.zip
Bug: 217507332
Test: Local verification, TH & Forrest
Signed-off-by: Ramji Jiyani <ramjiyani@google.com>
Change-Id: I97f2011a61252d3cb798af0fab99221b754328ca
The expfetcher binary (added in
https://critique.corp.google.com/cl/424076941), can fetch experiments
configuration from CDPush and load them into Soong as part of its
startup. If the binary exists, then we use it to fetch experiments
config and put them in the out directory so that those env variables can
be loaded by Soong during startup and inturn control whether RBE should
be enabled or not.
Design doc: go/rbe-android-dev-gradual-rollout
Test:
1. time lunch aosp_bramble-userdebug (first lunch when "out" dir doesn't
exist) - https://paste.googleplex.com/5824218777255936 - took ~9s and
ran with RBE enabled.
2. time lunch aosp_bramble-userdebug (when "out" dir already exists) - https://paste.googleplex.com/6485045129773056 -
took ~3.5s and ran with RBE enabled.
3. time lunch aosp_bramble-userdebug (when
"vendor/google/tools/soong/expfetcher" doesn't exist) - https://paste.googleplex.com/6103083353374720 - took 6.5s
and not RBE enabled.
Bug: b/215181607
Change-Id: Ie3c085498c59929119534aa98863566eecb8e4eb
When the environment variable config file is loaded after config object
is initialized, we end up loading the USE_RBE variable in the config
file after the code to start reproxy process is run. This causes a
problem when USE_RBE variable itself is set in the config files. To
avoid this, I've moved the config file loading code to be within the
config package, this makes the main.go file cleaner too.
Test:
Ran a build with USE_RBE:true set in the config json file. The build
fails without this change and succeeds with this change.
Bug: b/209486170
Change-Id: Iab3957b64f4b5456a861057d16ad318f4f78e0cb
For example, new metrics at HEAD highlight that 99 of 1379 total
cc_library_static modules are converted.
Test: m bp2build, printproto
Change-Id: I6cc4227124e9a130b75911f3e40e6585d731d00a
Reproxy should be respecting the -j value set by the user and not be
doing excessive local executions assuming the whole machine is available
to it. The local_resource_fraction flag is a way to ensure reproxy
consumes CPU only upto the -j value specified by the user.
Test:
1. Ran with `USE_RBE=true m -j 10 nothing` and local_resource_fraction
was set to 0.14 on a 72-core workstation.
2. Ran with `USE_RBE=true m nothing` and local_resource_fraction was set
to 1.0 on a 72-core machine.
Bug: b/207296459
Change-Id: I118bc10109f5a55df7a6c1ecd79499320055f2ed
Colin and Jin opined that we shouldn't change production in order to
make debugging easier. I originally thought it's better to have one
fewer knob but I don't have very strong feelings about it and their line
of reasoning makes total sense.
Test: Presubmits.
Change-Id: Id8a914aebbeffec6e8f860157c13f81093194f14
This behavior is enabled by setting the environment variable
SOONG_UNBUFFERED_OUTPUT=1 .
This is not the default behavior because only one process can be running
in the console pool and this would thus result in a loss of parallelism
if multiple soong_build invocations are needed.
Changing the value of this environment variable does not result in a
rebuild, since it does not affect the build outputs.
Test: Presubmits.
Change-Id: I49d15eb145966bd805f0a47b46866285203b122a
[ 0% 0/5 ] generating Soong docs at out/soong/docs/soong_build.html
0:03 analyzing Android.bp files and generating ninja file at out/soong/build.ninja
0:03 converting Android.bp files to BUILD files at out/soong/bp2build
0:03 generating the Soong module graph at out/soong/module-graph.json
0:03 generating the Soong module graph as a Bazel workspace at out/soong/queryview
0:03 generating Soong docs at out/soong/docs/soong_build.html
Test: m soong_docs json-module-graph bp2build queryview nothing
Change-Id: I33abb8828ead9ef999ffa1a6c9c4b016957c6dd1
It's built explicitly by Microfactory but is under out/ and as such, it
would be normally flagged as a file in out/ that doesn't have a
generating rule.
Previously, a no-op rule was added to the Ninja file to prevent this
from happening, but there is no good reason to have two mechanisms to
exempt files under out/ from that check.
Test: Presubmits.
Change-Id: I37fc458ecc5f5734cd81bce2f4894063658df38f
Move cc module installation rules into Soong by overriding
InstallBypassMake. Update the locations that find host tools
to look in the Make installation directory instead of the Soong
installation directory, which will no longer be used.
The methods that find host tools are also used on go binaries,
so update the config methods that tell Blueprint where to install
go binaries to the Make installation directory too.
Bug: 204136549
Test: m checkbuild
Change-Id: Id172592c195e506102982a4af0084f6d9c68a896
The bpglob changes in build/blueprint submitted together with this
change make it necessary.
Test: Presubmits.
Change-Id: I3d19761ec1a199c2f77693a882f8744ce404c6de
It's better not to have state hidden in dotfiles (or rather,
dotdirectories) if we can help.
It's questionable whether the "linux-x86" path segment makes sense since
soong_build only ever runs on one operating system, but I didn't want to
rock the boat now.
Drive-by fixed some quoting fixes in rbc-run. Notably, I didn't wrap
`$@` into double quotes because I don't know whether the lack of double
quotes was intended or not.
Also drive-by fixed the fact that "out/soong" was added twice to the
directory name of bpglob. This turned out not to be a problem because
bpglob doesn't need to be explicitly built: if it's needed, it's
declared as an input of the glob files so it'll be built automatically
(at the cost of the first "null build" not actually being a null build)
Test: Presubmits.
Change-Id: I710d8d16cd8212059a0ca1ee95378505303eed83
ToolDir is going to become unstable when switching between KatiEnabled
and Soong-only builds while the duplication between out/soong/host and
out/host is resolved. bpglob gets executed very early during bootstrap,
before the primary builder has run to update the paths to match the
current configuration. Move it into SoongOutDir() so that its path
is more stable.
Moving bpglob causes incremental build issues, so add a bootstrapEpoch
constant that can be changed when making incompatible changes and will
wipe bootstrap intermediates.
Bug: 204136549
Test: m nothing
Change-Id: I7b1bd1ebfe1209d11db691b3ee00873ef92658cd
It was the same as SoongNinjaFile, except it used
shared.JoinPath instead of filepath.Join, which
doesn't matter here because the second argument
is never an absolute path.
Test: Presubmits
Change-Id: I95e64a8b8971bd168a1dc6670ae80f4d336045b5
1. Don't upload if the uploader binary is not present.
Bug: b/193703183
Test: Run the following tests locally:
1. run "go test ." in build/soong/ui/build
2. create vendor/google/misc/metrics_uploader_prebuilt/metrics_uploader.sh
and run m nothing to ensure metrics_uploader.sh was called
3. remove the file created in step 2 then run m nothing and ensure it
doesn't attempt uploading
Change-Id: I081a5510b3f30480720c3e7dd235623c805fa7a4
This was reverted unnecessarily along with the change that actually
broke the build.
Previously, the sdk snapshot was assumed to be generated for the
current build system. This change adds support for the
SOONG_SDK_SNAPSHOT_TARGET_BUILD_RELEASE environment variable which can
be used to select the target build release in which the generated
snapshot will be used.
At the moment this will only affect the properties that are output but
if/when it becomes necessary it can also be used to control more
aspects of the snapshots such as supported member types or even
members.
This change does not modify any properties that are build release
specific. That will come in following changes. However, it does add a
test that targets build release S which defines a baseline for
properties that will be affected in following changes. That baseline
makes it easier to see the effect of those follow up changes.
Bug: 197842263
Test: m nothing
Change-Id: If4b452237f105382550d2842c8010249afbc7432
Previously, the sdk snapshot was assumed to be generated for the
current build system. This change adds support for the
SOONG_SDK_SNAPSHOT_TARGET_BUILD_RELEASE environment variable which can
be used to select the target build release in which the generated
snapshot will be used.
At the moment this will only affect the properties that are output but
if/when it becomes necessary it can also be used to control more
aspects of the snapshots such as supported member types or even
members.
This change does not modify any properties that are build release
specific. That will come in following changes. However, it does add a
test that targets build release S which defines a baseline for
properties that will be affected in following changes. That baseline
makes it easier to see the effect of those follow up changes.
Bug: 197842263
Test: m nothing
Change-Id: I5cfde5e9e86af522b0d5030d301e116b0233fd62
If SOONG_UI_ANSI_OUTPUT is set to a true value force the simple status
output to keep ANSI codes. This will allow buildbots to collect logs
with ANSI codes in them. Smart status output is not affected as it
always keeps ANSI codes.
Bug: 147310922
Test: manual
Change-Id: I0b78ceebb65125b8e8dafb4787816fb679d3eb3e
Make smart status output automatically disable table mode when the
window size is not available.
Bug: 147310922
Test: status_test.go
Change-Id: Ic57e1efd742e869bb84b6a86b3014335f5a65d39
`m product-graph` runs a "non-full" build, which skips
some steps to improve performance. One of the steps
it skips is making a .installable_files file. Soong
reads this file and removes any files that were removed
from the list in this file. It errored out if the file
didn't exist. Make soong less strict about the presence
of this file, because if it doesn't exist, there shouldn't
be any installed files to remove either.
Fixes: 168105598
Test: rm -rf out/, m product-graph
Change-Id: I366f7b09d87911f9660d4e08c2d2f097cc04800f
- Remove useValidations: whenever it was used, it was turned on, so
there was no point in keeping that knob
- Use the new soong_build invocation name constants
Test: Presubmits.
Change-Id: Ia3e8928d30d3de1e0adaa741111771304e56b139
They were a bit repetitive.
In addition, make the environment checks more correct; they could
probably use an integration test or two to make sure that when the
environment changes, exactly those outputs are rebuilt that need to be,
but for now, this is an improvement already.
Test: Presubmits.
Change-Id: Idd79b81ca6975d57d00e5bf4699d266152505ff8
This makes soong_ui the only place where soong_build is invoked, thus
greatly simplifying the conceptual model of the build.
It comes with the slight limitation that now soong_docs (and queryview
and the JSON module graph) are not Make targets anymore, but I suppose
that's an acceptable loss.
The only place where someone depended on soong_docs from a Makefile is
removed in a separate change.
Test: Presubmits.
Change-Id: I3f9ac327725c15d84de725d05e3cdde1da3dcbe2
Its value is a function of the call site, so it doesn't make a lot of
sense to plumb it through the configuration.
Test: Presubmits.
Change-Id: If928b34de075969fd42932212ce9187808cbdf86
It used to be invoked from out/soong/build.ninja, which required two
soong_build invocations one after the other (ne to generate
out/soong/build.ninja, one to generate the queryview workspace). This
was slower and required some shell-quoted-in-ninja-quoted-in-Go .
Test: Presubmits.
Change-Id: Idda79c067606663b66e9f94626fa24f3b5af4114
This includes the JSON graph generator and bp2build.
Before:
GENERATE_BAZEL_FILES=1 m nothing
GENERATE_JSON_MODULE_GRAPH=1 m nothing
Now:
m json-module-graph
m bp2build
They can now also be combined with other targets or each other.
The longer-term goal is to run "m queryview" and "m soong_docs" using
the same infrastructure. There are two alternate approaches:
1. Call soong_build from within the main Ninja invocation. This requires
two sequential soong_build invocations and is thus slower.
2. Do everything requested in the same soong_build invocation. This
would be faster, but one AFAIU can't tell Ninja that multiple possible
actions can build the same output so that doesn't work.
(1) is somewhat more desirable because soong_docs seems to be built
from build/make/core/main.mk ; I assume that that can be worked around
although I haven't checked where the output of "m soong_docs" goes.
Test: Presubmits.
Change-Id: If5ba36490d9f3f60733e6d6be9286eb2b67c3ff5
The only case for this was Blueprint itself at build/blueprint, but with
that being a part of Soong, this special case is not necessary anymore.
Test: Presubmits.
Change-Id: Icc51cd80bd43f936a97018061cfbf76fc385e4c3
It was confusing because bootstrapping uses two configurations: the
"global" config and the special-cased bootstrap one.
This change merges them.
Test: Presubmits.
Change-Id: I82b482cbe28a343ab6991374b2a28667e1a06b48
These are: TopFile and GeneratingPrimaryBuilder.
Also re-shuffle the list of flags to make a bit more sense and finish
the rename of BuildDir and NinjaBuildDir to SoongOutDir and OutDir,
respectively.
Test: Presubmits.
Change-Id: I103ff5f09f1c0d16f695a7da5dea13b55028e33e
The dangling rules check was running `ninja checkbuild -t targets rule`.
This apparently worked fine with glibc, but is failing when ninja is
compiled with musl. Musl's getopt_long is leaving "checkbuild" in argv
when calling ninja's ToolTargets, resulting in:
ninja: error: unknown target tool mode 'checkbuild'
Remove the extraneous checkbuild argument.
Bug: 190084016
Test: m checkbuild
Change-Id: I61b6475a5f7cb9d3d47232057ecfdc798864dd81
Before, we piggybacked on the implementation of regular soong_build and
wrote a fake build.ninja file to satisfy Ninja.
Now, instead, the JSON module graph is a a separate action in the Ninja
output file. This has the pleasant side effect that one can flip back
and forth between generating the JSON file and regular Soong without
loss of incrementality.
Side cleanup: write .d files in a slightly cleaner way.
Test: Presubmits.
Change-Id: Ia853383567b9dd31c53f3bdf56cfc8d517b498ec
These are just out/ and out/soong/ and the old names were quite
confusing.
Test: Presubmits.
Merged-In: I999ca62162062f27e449f83ffb00fa580d4065b8
Merged-In: I2fcd80a9e376a6842a06aa104a9f6f5c5e16f8c7
Change-Id: Ib481d2aac40df8da1b74174dc8ec576c1cb48be0
The following files are forked:
- build-globs.ninja
- The glob list files
- .d files for the glob list files
- The output file (build.ninja or the bp2build marker file)
This makes bp2build and soong_build not overwrite each other's files
they need for proper incrementality.
Test: Presubmits.
Change-Id: I69d192cbd36ecd9677f46f3fa095dfce6f872227
In particular, Bazel sometimes creates directories whose files cannot be deleted.
Test: m clean used to fail after b build //system/timezone/apex:com.android.tzdata, but now it works
Test: Added integration test which fails without this change
Change-Id: I08c8feed21c31ec187fe40be513f7eb4865c8ac3
This is done by moving SetupSignals() to its own little package.
There are a number of tiny little utility packages for soong_ui we might
be better of merging, but that's for another change (maybe)
Test: Presubmits.
Change-Id: I07b0ca98bfb8884ef4223d665e632183b9896a0d
This serves to not link parts of soong_ui (and eventually soong_build)
into a separate, weird binary. This is in turn good because they contain
any number of global variables and no one really thought about what
happens when two instances are executing at the same time in the same
address space.
This comes with a slight performance hit: 5 aosp_* projects build 152
seconds instead of 146. I suppose this is a price worth paying for a
clean design?
Test: presubmits.
Change-Id: I5623dcab2290f0fc392dd2ede597b9794a3d2a4e
Major operations:
* Fix the go_package entries to be consistent, as the new tool
complains when it doesn't have a '/'.
* Regenerate with the new protoc-gen-go tool.
* github.com/golang/protobuf -> google.golang.org/protobuf
* proto.[Un]MarshalText -> prototext.[Un]Marshal
Change-Id: Ie1147bd2457fafb66ba555461b3bf14f0561a25d
Allows the builder of an sdk snapshot to specify a Soong config
variable that can be used to control whether the snapshot's prebuilts
are used or not.
Bug: 193523070
Test: m nothing
Change-Id: Ib09500ba61befc1202dff61dc06847c730ba9253
Currently within metrics we cannot distinguish between Bazel-involved
configurations:
Bazel as Ninja vs Ninja as Ninja builds
Bazel mixed builds vs non-mixed builds
Add these to the build configuration in order to distinguish between and
track them independently.
Test: go soong tests
Test: USE_BAZEL_ANALYSIS=1 m nothing and verify out/soong_metrics
Bug: 193672397
Change-Id: I94ce56c1a98a76d929598d9fe3070df16ffa1376
Previously we ensured the kati marker exists in kati-enabled builds, but
did not ensure the kati marker didn't exist in non-kati-enabled builds,
resulting in soong thinking kati would run after it when it would not.
Also change the condition to only create the kati_enabled marker if we
don't skip kati or kati ninja.
Bug: 189187214
Test: m nothing && soong_ui --make-mode --soong-only && verify
kati_enabled marker is gone
Change-Id: If196b194b6aee38e9d4135889a4a4048ee5add82
The source tree will eventually be made ReadOnly, and recipes that write
directly to the source tree will fail. Use a pattern-match approach on
the results of stdout/stderr to provide hints to the user in such a
scenario.
If multiple patterns are found in raw output, print error hint
corresponding to first pattern match. first pattern match is chosen
since the failing function will be at the top of the stack, and hence
will be logged first
Test: Wrote a unit test to assert errorhint is added to output.
Wrote an integration test that writes to a file in the source tree
1. When source_tree is RO, the recipe fails and an error hint is printed
to stdout
2. When source tree is RW, the recipe succeeds and no error hint is
printed
Bug: 174726238
Change-Id: Id67b48f8094cdf8a571c239ae469d60464a1e89c
This CL adds generateJsonModuleGraph bazelBuildMode and ensures that it
returns Soong early, before Kati and Soong metrics collection begin
(which causes errors, since they're looking for files that Soong in json
dump mode did not write).
Test: TH
Test: rm -rf out && SOONG_DUMP_JSON_MODULE_GRAPH=/tmp/soong.json m nothing
Change-Id: I264eadb3b3b0cd6b6e7a65adc7b39bb1c01ca136
--skip-config can be combined with --soong-only to skip creating
soong.variables from Make, allowing a custom soong.varibles.
Test: manual
Change-Id: Iee9bfa4efeed801339e7c3c1e4807709485e701a
1. Initialize an empty glob file for .bootstrap/build.ninja. Initializing
in soong_ui (and not soong_build) prevents inadvertently creating the
file inside the source tree
2. Remove soong-build-globs.ninja, which is not used during the build
Bug: 187194795
Test: Ran the following command locally for the target
art-target-arm:git_master-art
```
. ./build/envsetup.sh && lunch armv8-eng &&
art/tools/buildbot-build.sh --target
```
Change-Id: Ibe6eeff65ea1ab25136642299e9878d0da1cac42
The previous --skip-kati flag could be interpreted as "do not run kati
to re-generate ninja file". Add a more specific flag for the "soong
only" build use-case, where we do not load the kati-generated ninja
files at all.
Bug: 189187214
Test: build/soong/soong_ui.bash \
--make-mode \
--soong-only
--skip-soong-tests \
TARGET_PRODUCT=mainline_sdk \
SOONG_ALLOW_MISSING_DEPENDENCIES=true \
SOONG_SDK_SNAPSHOT_VERSION=unversioned \
SOONG_SDK_SNAPSHOT_USE_SRCJAR=true \
out/soong/mainline-sdks/art-module-sdk.zip
Change-Id: I91abbd28af517d4b550ebc6d88fd64947caf9545
Merged-In: I91abbd28af517d4b550ebc6d88fd64947caf9545
(cherry picked from commit 546de4a1f3)
- Rename the "BuildX" variables to "RunX"
- Remove redundant comments
- Inline all the "what to do" based on config in build.go
- Inline some constants only used in one place
Bug: 189187214
Test: m nothing
Test: build/soong/build_test.bash
Change-Id: I111a69e642212d7938d4971283545e0d9acbb01a
Merged-In: I111a69e642212d7938d4971283545e0d9acbb01a
(cherry picked from commit d274ea9196)
The following two Make vars control RO/RW access to the source tree
1. BUILD_BROKEN_SRC_DIR_IS_WRITABLE
2. BUILD_BROKEN_SRC_DIR_RW_ALLOWLIST
By default, (1) will be truthy.
- this ensures that this CL is a non breaking change across all products
- different products can opt in to set is as "false"
Bug: 174726238
Test: from build/soong dir, ran go test ./ui/build
Change-Id: I4d55ac74f02b2a73194d31506a9010162620b25a
I6dca478f356f56a8aee1e457d71439272351390b replaced calling
build/blueprint/bootstrap.bash with running minibp directly,
but didn't propagate the EMPTY_NINJA_FILE environment variable
to minibp. Since everything that uses EMPTY_NINJA_FILE is
executed directly from soong_ui now, replace the EMPTY_NINJA_FILE
environment variable with a config bool and pass it to minibp.
Bug: 189148777
Test: build/soong/build_test.bash --dist --incremental --shard-count=300 --shard=1 && du out/multiproduct
Change-Id: I4d64275ce02c5d68948012f71ac4dc3795af9e85
This CL fixes a typo in writeFakeNinjaFile to correctly write
a fake out/soong/build.ninja and its depfile. It also modifies bootstrap
phase to *not* run the main soong build phase (which takes more than a
minute) if GENERATE_BAZEL_FILES=1.
This change has the side effect that `GENERATE_BAZEL_FILES=1 m nothing`
no longer generates the real build.ninja, which is fine because one
shouldn't be using GENERATE_BAZEL_FILES=1 for that anyway (or, use
USE_BAZEL_ANALYSIS=1). This change has no effect on mixed builds.
Time on a change to Soong or any Android.bp files:
Before: bp2build_workspace_marker (~20 seconds) + build.ninja (1 min)
After: bp2build_workspace_marker (~20 seconds)
Time on the second of two consecutive `b build //bionic/...`: 2.070s
Test: TH
Test: Soong integration tests
Change-Id: I43720641815994caba97b8d165d7c3fc254cbd06
SOONG_SDK_SNAPSHOT_VERSION=current will generate unversioned and
versioned prebuilts and a versioned snapshot module. This is the
default behavior. The zip file containing the generated snapshot will
be <sdk name>-current.zip.
SOONG_SDK_SNAPSHOT_VERSION=unversioned will generate unversioned
prebuilts only and the zip file containing the generated snapshot will
be <sdk name>.zip.
SOONG_SDK_SNAPSHOT_VERSION=<number> will generate versioned prebuilts
and a versioned snapshot module only. The zip file containing the
generated snapshot will be <sdk name>-<number>.zip.
Bug: 157884619
Test: m nothing
m SOONG_SDK_SNAPSHOT_VERSION=current art-module-sdk
- check that the generated Android.bp file has not changed
from the default.
m SOONG_SDK_SNAPSHOT_VERSION=none art-module-sdk
- check that the generated Android.bp file does not contain
versioned modules.
m SOONG_SDK_SNAPSHOT_VERSION=2 art-module-sdk
- check that the generated Android.bp file only contains
version 2 of each module.
Change-Id: I087e9d7d3ad110508a3d6a39bca50cbb46b3ce82
Installclean is used in some build server builds when switching between
different TARGET_BUILD_APPS, remove the symbols directory so it doesn't
accumulate old symbols files.
Bug: 186507256
Test: m && m installclean && m
Change-Id: I316703cd0985ee555959a6dcdb39d5a702ab0332
This refactors bazel-build mode determination logic in soong_ui so it's
clearer which of three possible modes are being used in a given
invocation (NO_BAZEL, GENERATE_BUILD_FILES, or MIXED_BUILDS).
Test: bootstrap tests
Change-Id: I41d2baebf8d560c2cc42db8daa8b936101d453e3
It now handles adding .bp files and changing globs.
In order to do this, depfiles are now written separately from RunBlueprint.
This is necessary due to the confluence of a number of seemingly
unrelated factors:
1. The glob filelist dependencies are discovered in globSingleton
2. Singletons need to be registered because otherwise singleton module
types panic
3. Singletons don't work because they require mutators bp2build does not
run
Due to (1), we would need to run the glob singleton. However, due to (2)
and (3), we can't run singletons and have to run Blueprint with
StopBeforeGeneratingBuildActions, which is when the build actions
writing glob files would be generated. So what happens is:
1. When bp2build is run, the glob singleton is disabled
2. At the end of bp2build, the list of glob files is artifically added
to the depfile of the workspace marker file
3. When build.ninja is generated, the Ninja file containing the glob
list file is written by the now-active glob singleton
Test: Presubmits.
Change-Id: I3c5898d8c57c554a93520276c64a952afc912dbe
This is done by setting the INTEGRATED_BP2BUILD environment variable
when invoking the build.
Even though the name of the marker file insinuates that a Bazel
workspace is already created, this is not the case yet.
An issue that remains is that a .d file is not written for the marker
file so it won't be rebuilt if a .bp file changes. Fixing this requires
delicate surgery because writing the .d file is the result of delicate
interplay between Soong and Blueprint.
There are also a number of semi-related fixes:
- The name of soong.environment.{used,available} is now on the command
line of soong_build (soong_docs is still special cased because its
command line in the Ninja file is taken from the os.Args of
soong_build so it's not trivial to remove the --{available,used}_env
from it
- bp2build writes a separate soong.environment.used file
- I had to call SetAllowMissingDependencies() separately when creating
the android.Context for bp2build so that bp2build runs in the
integration tests (it was not obvious how not to do this)
- Fixed a number of integration tests where a command with an expected
exit code of 1 was used as the last one in a test case, thereby
breaking the test suite
Test: Presubmits.
Change-Id: Ibeb61c26022cf801dcb98505b4039151b3409873
This is so that the way soong_build is invoked is simpler, which is in
turn useful so that it can be invoked multiple times within a single
build, which in turn will be used to invoke bp2build routinely (as
opposed to manually when needed)
Test: Presubmits.
Change-Id: Iddaebb05ff7bcedc0db8273192bb31284b739920
The output from bootstrap would contain the a one-line summary of RBE
download / upload stats.
Bug: b/183007125
Change-Id: I90082a8433504e40bbf92992c3c8d1d656c49429
This variable tells reproxy the number of times an action that
mismatches between local and remote-executions should be run remotely to
determine if the action is inherently non-deterministic.
An action is considered non-deterministic if the number of unique output
digests we get from the remote-run is > 1.
Bug: b/178842439
Change-Id: I0d50eed29b801be67a7ede9b25ce7f4535980f05
It's replaced with a flag in bootstrap.Args .
Test: "m nothing" (presubmits take a full workday these days)
Change-Id: Ia0bfa2091013e389890e583c559006077806af99
This requires linking Blueprint into soong_ui. It lets us avoid the
complicated dance of Ninja files and shell scripts: now the information
as to how soong_build is built is passed directly to Blueprint using a
struct that contains all the information the command line arguments used
to contain.
The ability to run Blueprint from the command line is kept (for now).
Some variables in bootstrap/command.go needed public accessor functions
because soong_build reads them. This will be disentangled by moving the
flag parsing to soong_build.
The presence of the flag definitions in Blueprint means that soong_ui
now also accepts them. This is not a problem in practice because they
are ignored and because soong_ui itself is hidden behind a few layers of
shell scripts.
Test: Presubmits + the new bootstrap_test.sh .
Change-Id: I6dca478f356f56a8aee1e457d71439272351390b
This lets us not leak $PATH to soong_build. It was only needed for
Darwin tests anyway.
Test: Will ask jingwen@ who has a Mac.
Change-Id: I4647e41275b323fe6283580f8f92718c6229f23e
- Incorporate BAZEL_* variables in soong.environment.available
- Set SOONG_DELVE when requested
Test: Manual.
Change-Id: I3ac675f4876220b788cc48d288b402ac6016c37b
This is exclusively used by tests so it's awful, but Darwin builds are
currently broken so let's unbreak them first then start thinking.
Test: "m nothing" on Linux (I don't have access to a mac OS machine)
Change-Id: I1ea9ca71a5aff36a3454282a4c87ad368138baaa
This reverts commit 6e49493dac.
FULL_BUILD is not set during the config stage, so this never calls
cleanOldInstalledFiles.
Bug: 168105598
Bug: 182008128
Test: manual
Change-Id: I58a54f167763cdb77b3c1bd4f18f519fcaf8751a
This sandboxes Soong's tests better.
Setting "TOP" is slightly ugly, but doing it properly would conflict
with aosp/1609218.
Test: Manual ("m nothing")
Change-Id: Ie3d3cd17f116a5fe0ad25c670fc5ed9c33f8123b
This works by setting the SOONG_UI_DELVE= environment variable to the
port on which soong_ui should accept a Delve connection on.
This is achieved by reusing the Delve execution logic between soong_ui
and soong_build.
Test: Manual.
Change-Id: Id2c1d4b6faac1a4a3918c91030ce2239f7daf54f
Rename to get consistent ramdisk directory naming in
out/target/product/<name>:
debug_ramdisk
ramdisk
vendor_debug_ramdisk
vendor_ramdisk
Test: build and inspect out/target/product/<name>
Change-Id: Ib86e6509bd910e8c95bcb6e3f7bb639ebbfe3758
This lets one avoid any decisions as to when to chdir there during its
execution and leads to better sandboxing because the pwd doesn't leak to
init() functions anymore.
Test: Manual.
Change-Id: I1560da8ed3a621249426f9e8908aa890c21e13ba
TestSendLog sometimes hangs on the buildbot, although it has never
been reproduced locally. The cause appears to be a unix domain
packet that was sent but never received. Skip the test in short
mode for now, which will leave it manually runnable but not run
it as part of the build.
Fixes: 120596545
Test: m nothing
Change-Id: I3e6bc9b5f1d9c15dc9a7294d98cbd917d0637c44
Also delete the now-unnecessary soong_env binary.
Test: Manually. Also checked what happens when a used environment
variable changes.
Change-Id: Ib393e7f444e94819198c6cce4bcd8719d9fd9441
bp2build is a Soong mode that returns as soon as the BUILD files are generated. This causes it not generate the build.ninja file, which the Ninja process executing soong_build itself expects to produce as an output. If there isn't an existing build.ninja file generated from a previous build, GENERATE_BAZEL_FILES=true m nothing will fail.
This CL generates the expected files as a workaround, and also makes GENERATE_BAZEL_FILES=true skip the Kati/Ninja steps in soong_ui since they aren't needed.
Test: rm -rf out/ && GENERATE_BAZEL_FILES=true m nothing && m libc
Fixes: 178683777
Change-Id: I2515ef7961682d2be5f096ed24831cc185165a67
This error message it currently being
logged to stdout which goes to build.log file . We want it to be logged to
build_error.log file instead so that downstream systems that need to run
based on the error message will continue to work.
Test: Tested by running `m toybox` and ensuring that FAILED: prefix is
at the beginning of the line.
Bug: b/177221705
Change-Id: Ie0c9acee2739acf149384e33804b5fca3273c24f
Therefore, no need to remove vendor-ramdisk-debug.cpio.lz4
for installclean as it will not be installed to $OUT dir.
Bug: None
Test: make vendorbootimage_debug
Change-Id: Ib7fb9931c55a9bb24e5ca8c4a80bd72f7233c57f
There are few build targets that don't generate an installed file list,
e.g. product-graph. Skip the old installed file cleanup step so that the
func doesn't complain about a lack of the list file.
Fixes: 168105598
Test: m product-graph
Change-Id: Ib7dce6b801979bb565b74d6355143bac23b84fe6
To measure the MaxRSS memory correctly, read the proc status file
under /proc/<pid>/status and extract the MaxRSS value from it. The
implementation is only available for Linux based distributions.
Bug: b/169453825
Test: go test
Change-Id: I32e3068fee7447f9ef5dfb5a8d8dcb6934e0af23
The metrics.go had missing comments and also did minor code refactoring
to be more in golang best practices.
Bug: b/172917718
Test: m nothing.
Change-Id: Id63e4af3f27b582fc13ef3f988ac5c8707fb9adf
No needed to define soong_metrics_proto since it is defined in
the Android.bp file.
Bug: b/172917718
Test: m nothing
Change-Id: Ib5f4cd6d06c08660803cf070da544e9c2d1dce1f
The setup_tools metrics has been missing since day one and is
needed to track down slowness of setting up the build system.
Bug: b/175706305
Test: m nothing and ran the printproto command to check that the
setup_tools field has been set.
Change-Id: Idc8a38fa830e0a906170feeede63435715eaa05b
The event.go code was refactored to follow the best practices
of golang code style.
Bug: b/172918681
Test: go test ./ui/metrics
Change-Id: Ic57d7cd576a9b146530ae37f03f4f5679d6cffef
Bazel is executed several times during the execution of soong_build.
For each bazel execution, generate a profile and save under the
BAZEL_METRICS_DIR which is defined in soong_ui.
Bug: b/174479924
Test: * USE_BAZEL_ANALYSIS=1 USE_BAZEL=1 m nothing and checked
if the cquery and graph build bazel profiles were generated.
* Verified that the generated bazel profiles were uploaded
to the local dev metrics pipeline.
Change-Id: I3d20204484dc6c5a1525a5d3eec1d62cfb33535b
Also get Bazel to write real files there (not symlinks) so that the DIST_DIR can be independent.
Test: Manually using e.g. DIST_DIR=/tmp/foo USE_BAZEL=1 m dist
Change-Id: I39d5219500864c9ecc85f356a028e9b5bf2607f4
The upload functionality now supports directories to be uploaded
for metrics purpose.
Bug: b/174479728
Test: Wrote unit test case.
Change-Id: I6906be4c1b7fd76ddf6ff7b94e48fe1c4209c59d
Code refactoring has been done for logs directory logic code since
the bazel metrics directory depends on the log directory. For builds
that did not specify a dist directory, the log directory is under
out directory. With dist, the logs directory is under <dist dir>/logs.
This matters for Android CI builds where the metrics files are
placed under logs directory. With this change, the bazel metrics
directory and corresponding files will be under <dist dir>/logs
directory for Android CI builds.
Bug: b/174479728
Test: * USE_BAZEL=1 m nothing (bazel_metrics dir in out dir)
* m nothing (bazel_metrics dir deleted)
* DIST_DIR=/tmp/build USE_BAZEL=1 m nothing dist (bazel_metrics
is in /tmp/build/logs directory)
Change-Id: Ic9e1ff49a1964fcaaf801bde2c19f33597ca1db4
The existing --skip-make flag disables both the config step and the kati
step in the build. Add support for a --skip-kati flag that skips just
the kati step, and refactor things so that the logic is shared between
these two.
Bug: 174315599
Test: TARGET_PRODUCT=aosp_arm64 soong_ui --make-mode --skip-kati;
(verify soong.variables is regenerated)
Change-Id: I75b1910fc1c12fcda130e37b7bc4c050131c7b33
On top of improving the comments, I also refactored the status checker
to simplify and clarify its use case to be a ninja stuckness checker,
since it doesn't appear to have other purposes.
Test: TH presubmit
Bug: b/173474588
Change-Id: I2cf51a1ebf16071a24a1c13c06c7b1adf60256de
This CL also removes --warn_real_to_phony and --warn_phony_looks_real,
since --werror_real_to_phony and --wrror_phony_looks_real are already
specified.
Test: treehugger
Bug: 173474588
Change-Id: Icbb0f53182d1b912c62f8044f52bb79d985bf868
This removes the need to source bazelenv.sh for USE_BAZEL_ANALYSIS, and
unifies mixed builds to use the checked in tools/bazel and bazelrc.
It also unifies all bazel-related output to be in out/bazel.
Without aosp/1502095, this change still requires toplevel_output_directories to be an empty
list, otherwise there'll be this error:
ERROR: Directories specified with toplevel_output_directories should be
ignored and can not be used as sources.
Test: With aosp/1441774: rm -rf out/ && lunch aosp_cf_x86_auto && USE_BAZEL_ANALYSIS=1 m libc && prebuilts/build-tools/linux-x86/bin/ninja -f out/combined-aosp_cf_x86_auto.ninja -t commands libc | grep bazel-out | wc -l # 2 results
Change-Id: I69b217ec88da531415792bb6e04b6a194ca4718d
This patch adds information behind the Bazel USE_BAZEL=1 execution
pipeline.
Test: m
Bug: 173474588
Change-Id: I54bdd26fb14c8a371de0922d193419112e8c3ece
Ensures that Bazel and Ninja are using the same binaries from PATH, such
as `sort` from the linked bug.
Test: USE_BAZEL=1 m
Test: rm out/soong/apex/depsinfo/new-allowed-deps.txt && USE_BAZEL=1 m
Bug: 161074854
Fixes: 161074854
Change-Id: Icc3e717e6d3cfcecfe90f0fb3a94a86485a11918
break and default statements are not needed inside of a switch
statement.
Bug: b/173028918
Test: USE_BAZEL m nothing
Change-Id: I14aa8cbae3a9b3c859f147c5134600f1e75c6a89
Added a tracer named "bazel" in runBazel function to capture topline
metrics when running bazel.
Bug: b/173028918
Test: * USE_BAZEL=1 m nothing and checked soong_metrics file using
printproto command to verify that bazel topline metrics
were captured.
Change-Id: I5cb0728a4da48545dc701cc79627c318d5d9a29d
Generate the bazel profile file that contains the metrics of
executing the ninja build phase of Soong.
Bug: b/173028918
Test: * m nothing and check out dir that there is no bazel_metrics dir.
* USE_BAZEL=1 m nothing and checked
out/bazel_metrics/build_bazel_profile.gz existed.
* m nothing and checked out/bazel_metrics does not exist.
Change-Id: I797d1eecf5c2c260ade8b55dc69c237bfd0fcbd4
$OUT/bazel_metrics directory is created in order to dump the
set of bazel profile files being created from a single build
execution. The directory is created from soong_ui.
Bug: b/173028918
Test: * m nothing and check out dir that there is no bazel_metrics dir.
* USE_BAZEL=1 and checked out/bazel_metrics was created.
* Ran m nothing and verified that out/bazel_metrics directory is
deleted to ensure no metrics is uploaded or collected from the
pipeline.
Change-Id: I1d3c2471065fae6931f35cef7f0f35fd84f76bef
The UseBazel() function will be used in several places to perform
different functionality such as setting up the metrics path.
Bug: b/173028918
Test: m nothing
Change-Id: Ie94073b8f0552ec7528e1cc2f3be74b693dc3135
This ensures that the lunch repo rule always reads the right Ninja file.
Test: USE_BAZEL=1 m
Test: m
Change-Id: I7f670dd538f46c4dae5ea537b857ff04520b60e7
This ensures that USE_BAZEL=1 mode has the same directory structure
under out/ as it does without USE_BAZEL=1.
Test: Manually verified building USE_BAZEL=1 aosp_flame with droid and
libc
Change-Id: I27e810772d1bf04bd7930ea122217b93d2fd48b4
Collect the resource information of each executed process in soong_ui
for metrics analysis.
Bug: b/169453825
Test: m nothing; "lunch 1" && m
Change-Id: I8c7fe019111921c4c59174d133b85439ec825885
This was caught while running the soong_build docs action under Bazel as
ninja executor. Since the config file is not an explicit input to the
action, it's not present in Bazel's execution root during action
execution time, leading to a missing file error. To fix it, add the file
as an input to the action, if it's configured in product variables.
New soong_build statement:
build out/soong/docs/soong_build.html: s.writedocs.soongDocs $
out/.module_paths/Android.bp.list out/soong/soong.variables $
out/soong/dexpreopt.config | out/soong/.bootstrap/bin/soong_build
outDir = out/soong/docs
Test: m
Test: USE_BAZEL=1 m
Bug: 161958189
Fixes: 161958189
Change-Id: I2bf264e848bb29ac91f4196fbe9c4ecf3cea8a2c
