This refactoring prepares for introduction of bazel prod mode, an
alternative mechanism for mixed builds allowlist handling.
* Decide bazel-mode as close to soong_build main as possible
* BazelContext itself decides whether a module is allowlisted
* Separate bp2build and mixed build allowlist
Test: m nothing, manually verified all modules are mixed build disabled
(via metrics)
Test: USE_BAZEL_ANALYSIS=1 m nothing, manually verified that mixed build
disabled/enabled modules are identical before and after change.
Change-Id: I0f55d8b85000cb4a871a099edc6d7d868d7df509
Previously, there was no way to prevent a module from overriding a
value provided by a defaults. That made it difficult to ensure
consistency across modules, e.g. for modules that use
framework-module-defaults.
This change adds the protected_properties property to defaults modules
which allows a default module to list those properties that should not
be changed by a module applying those defaults.
Properties can either be listed explicitly by name, or it can just be
a single "*" in which case all properties that are set on the defaults
will be protected.
Bug: 230841626
Test: m nothing
Change-Id: Ibb0e482c2856a572437e7818466f41c5493baf33
ModuleBase.generalProperties served the pupose of being a subset
of ModuleBase.customizableProperties. But now with the removal of
the latter, the former is simply a redirection to Module.GetProperties()
Bug: 206961391
Test: m nothing and diff the ninja files
Change-Id: I6dd8b7ba74eb5e7ffb61029b0f9129eec2ccfdaf
- customizableProperties was being used to access all properties,
i.e. basically `GetProperties()`
- generalProperties was a subset of properties,
i.e. `initArchModule()` would only add new arch-specific properties
to `customizableProperties` (and `archProperties`) but not `generalProperties`
This PR sets generalProperties to contain all properties,
which then makes customizableProperties redundant.
And in arch.go, any iteration is done via `archProperties` instead.
Bug: 206961391
Test: m nothing and diff the ninja files
Change-Id: Ieb72b31c0a447fcbf34c92a04f002d7b9d777a86
Since these are not being converted directly, this has two primary
impacts:
* defaults modules will no longer appear as unconverted deps.
* defaults modules do not have to be marked individually, which should
allow all defaults-based soong-config-modules to just convert as
necessary.
Test: bp2build.sh
Change-Id: I44c99d5a51d1887a95c17dfdf956f91af671b2ea
Each conversion required defining a separate mutator, which will each
operate on _all_ modules and requires each to repeat checks whether the
mutator should operator. Instead, we introduce a single mutator and
modules can define a ConvertWithBp2build to implement bp2build
conversion for that module.
Test: bp2build.sh
Bug: 183079158
Change-Id: I99d4b51f441c2903879092c5b56313d606d4338d
base.module = module is redundant in InitDefaultsModule() becase of the preceding initAndroidModuleBase()
minor reformat of initArchModel()
Test: m nothing
Bug: n/a
Change-Id: I16d5a400a33098a81ffbf6c81eba5b13db6debf1
select statements.
This supports defaults from the same or different namespaces, and
transitively defaults as well.
Test: soong unit tests
Test: CI
Change-Id: I99435bacfcfbfe20ad753b8021a1779531d7595a
java_sdk_library modules in builds with AllowMissingDependencies may
be missing defaults modules that cause them to look for api files that
they normally wouldn't need. Move the error to runtime so it doesn't
block the build unless the branch tries to build that module.
Test: prebuilts/build-tools/build-prebuilts.sh in aosp-build-tools
Change-Id: I279b0cd8493779f972c0ac02235967c10b35a5a0
Revert submission 1377717-metalics
Reason for revert: This has broken renderscript_mac target for aosp-master, see b/176909442
Reverted Changes:
I26ac54ca9:Define the standard license_kind rules.
I656486070:Export soong license data to make.
If9d661dfc:Export soong license data to make.
I97943de53:Add ability to declare licenses in soong.
Icaff40171:Rough-in license metadata support to make.
Ib8e538bd0:Add variables for notice deps, license kinds etc.
Change-Id: Iddf5468e0175831ddb642011f2768f87a5e4fcf2
Make sure every exported function or type has a godoc comment.
Also makes minor changes like unexporting functions that are not used
outside the package and fixing minor style warnings.
Bug: 173449605
Test: m checkbuild
Change-Id: I533a595d02035aae8b2b603590be639826d2d4c8
The documentation java_genrule_host states that it creates a single
variant, which would make it work with the single variant fallback
in AddDependency used by the data property, but it actually has a host
and a host-cross windows variant. Modify osMutator to take the
OS-specific enabled properties into account to skip creating variants
that will immediately be disabled so there is a single variant.
Test: m checkbuild
Change-Id: Ic2daab29f4fa3a3797d7a08348fbfcf1036ec5dc
The commonProperties and defaultsVisibilityProperties fields are only
used as containers for default values for properties and only within
the InitDefaultsModule() and so can be removed and replaced with an
empty structure instead.
Test: m checkbuild and TH
Change-Id: Ic5038d6b84b33afdf4859ced08e59871b9cde4a2
Common properties are automatically inherited from a parent module
(i.e. one that calls CreateModule()) to the child module that it
creates. This makes no sense for dist/dists properties so this change
extracts them into their own structure separate to the
commonProperties.
Test: m checkbuild and TreeHugger
Bug: 160448975
Change-Id: Icceb20455e13394dd3b3bce464fb9bb34882d6c3
Previously, the only way for a module type to create modules (other
than defining its own mutator) was to register a LoadHook. However,
that is called before defaults are applied so any properties used in
that hook cannot take advantage of defaults, e.g. java_sdk_library
cannot use defaults to set its sdk_version property and have that
affect its child modules.
This change adds a new SetDefaultableHook() to DefaultableModule to
register a hook that is called after any defaults have been applied.
Also adds some tests to ensure that errors in the visibility property
introduced in a DefaultableHook are reported in the gather phase of
visibility processing.
A follow up change will switch java_sdk_library to use that instead
of the AddLoadHook() mechanism.
Bug: 155295806
Test: m checkapi
Change-Id: I13df3115f9e225f7324b6725eaeb16a78cc2538a
Adds a couple of new methods to manage visibility property instances to
reduce duplication and encapsulate the implementation slightly better.
The AddVisibilityProperty method is exported as it will be needed by
other packages in follow up commits.
Bug: 155295806
Test: m nothing
Change-Id: Ic1a9bb1e151fc6ae65761344fd210b4e4ba74fbc
Product variables structs are generated at runtime to contain only
the properties that apply to the current module. Defaults modules
always contained all product variable properties. Defaults modules
apply their properties to the target module using
proptools.PrependProperties, which prepends structs that have
matching types. Filtered property structs had a different type
and were dropped.
Even after adding filtering to the defaults product variable
properties, defaults modules may contain more property structs
than the target module they are applied to, so the product
variables struct for the defaults module could contain more
fields than the product variables struct for the target module.
Use proptools.PrependMatchingProperties when applying defaults
of product variables instead, which will apply matching properties
across types.
Test: defaults_test.go
Test: variable_test.go
Change-Id: I281bdefef92053457a3b7b65383493a4e7d999df
Previously, it was defaultable only for cc_library. Now, it is
defaultable for all module types.
Bug: 128708192
Test: m
Change-Id: If248f593da6f4b724bf889ccd7f2e077d48069b5
Existing modules, either general one or package ones have a single
visibility property, called visibility in general, and
default_visibility on package, that controls access to that module, or
in the case of package sets the default visibility of all modules in
that package. The property is checked and gathered during the similarly
named phases of visibility processing.
The defaults module will be different as it will have two properties.
The first, visibility, will not affect the visibility of the module, it
only affects the visibility of modules that 'extend' the defaults. So,
it will need checking but not parsing. The second property,
defaults_visibility, will affect the visibility of the module and so
will need both checking and parsing.
The current implementation does not handle those cases because:
1) It does not differentiate between the property that affects the
module and those that do not. It checks and gathers all of them with
the last property gathered overriding the rules for the previous
properties.
2) It relies on overriding methods in MethodBase in order to change the
default behavior for the package module. That works because
packageModule embeds ModuleBase but will not work for
DefaultsModuleBase as it does not embed ModuleBase and instead is
embedded alongside it so attempting to override a method in
MethodBase leads to ambiguity.
This change addresses the issues as follows:
1) It adds a new visibility() []string method to get access to the
primary visibility rules, i.e. the ones that affect the module.
2) It adds two fields, 'visibilityPropertyInfo []visibilityProperty'
to provide information about all the properties that need checking,
and 'primaryVisibilityProperty visibilityProperty' to specify the
property that affects the module.
The PackageFactory() and InitAndroidModule(Module) functions are
modified to initialize the fields. The override of the
visibilityProperties() method for packageModule is removed and the
default implementations of visibilityProperties() and visibility()
on ModuleBase return information from the two new fields.
The InitDefaultsModule is updated to also initialize the two new
fields. It uses nil for primaryVisibilityProperty for now but that
will be changed to return defaults_visibility. It also uses the
commonProperties structure created for the defaults directly instead
of having to search for it through properties().
Changed the visibilityProperty to take a pointer to the property that
can be used to retrieve the value rather than a lambda function.
Bug: 130796911
Test: m nothing
Change-Id: Icadd470a5f692a48ec61de02bf3dfde3e2eea2ef
Changes the InitDefaultsModule method from taking a DefaultableModule
to taking a DefaultsModule in preparation for adding visibility support
to defaults modules.
Bug: 130796911
Test: m nothing
Change-Id: I1d459da1017ae7f2654e7eb275cb424e52d85730
Also, removes unnecessary cast from DefaultableModule to Defaultable.
Bug: 130796911
Test: m nothing
Change-Id: I01d8f5186927215a1aa6b7431558041f427d7381
Add an empty GenerateAndroidBuildActiosn to DefaultsModuleBase
so that every defaults module doesn't need to provide one. This
will also allow adding an implementation in the next patch.
Test: m checkbuild
Change-Id: I13554bdb3a287c2f18e1efab74d4f08a1ba8620c
Also remove an unused field in DefaultsModuleBase.
Test: m nothing
Test: Verify no diffs in ninja files:
<check out clean tree>
m nothing && shasum out/*.ninja | sort -k2 > before
<apply patch>
m nothing && shasum out/*.ninja | sort -k2 > after
diff before after
Bug: 112158820
Change-Id: Id819cea10f7af1603b4e4e1b14c0b49afcd0fecd
Blueprint allows multiple dependencies on the same module after
https://github.com/google/blueprint/pull/210.
Fix defaults, WalkDeps can now find the same defaults module multiple
times.
Fix droiddoc, if the srcs_lib points to a lib module that is
specified multiple times, for example through explicit properties
and implicit default libraries, the srcs would be listed on the
command line multiple times. Move srcs_lib to use its own dependency
tag.
Test: m checkbuild
Change-Id: Ia30ce83be1382820d76bca5046ad18cbffe8af1a
Also adds checks that the dependencies are android.Modules and
are not disabled.
Test: m checkbuild
Change-Id: I05e945f38915d49cd3c0ab72a86576949bc7eff2
InitDefaultsModule and InitDefaultableModule were requiring the
module to be passed in as an argument twice, once as a
android.Module and once as an android.DefaultableMOdule. Use
a type assertion instead.
Test: builds
Change-Id: I57d721e68a4f016e02c17a678af5f2ba25a9a430
Fix mutator registration for tests to allow different tests
in the same package to register different mutators.
Allow tests to track the resulting ModuleBuildParams objects
to use in assertions, and provide helpers for getting them.
For example:
config := android.TestConfig(buildDir)
ctx := android.NewTestContext()
ctx.RegisterModuleType(...)
ctx.MockFileSystem(...)
ctx.ParseBlueprintsFile("Android.bp")
ctx.PrepareBuildActions(config)
ctx.Register()
// Get the Inputs value passed to the javac rule for the foo module
inputs := ctx.ModuleForTests("foo".Rule("javac").Inputs
Test: java_test.go
Change-Id: I10c82967f5f3586d2c176f169906b571ed82fc73
Change module factories from returning a blueprint.Module and a list
of property structs to returning an android.Module, which holds the
list of property structs.
Test: build.ninja identical except for Factory: comment lines
Change-Id: Ica1d823f009db812c518f271a386fbff39c9766f
Blueprint is going to abdicate responsibility for determining the name
of a module. Add a name property, and a method to retreive the name.
Test: build.ninja identical
Change-Id: I09c6f5283cd6e28ad4b04c24c5ab8b00f71ae2ab
BottomUpMutators are going to lose their ctx.Visit* functions in order
to allow parallelizing them, move defaults to a TopDownMutator using
WalkDeps to only visit defaults modules.
Test: no changes to out/soong/build.ninja
Change-Id: I54ba65a7e2ae9503f4d217f63aa9178a7c5341f0
