This change adds support for dexpreopting standalone system server
jars from prebuilts.
Bug: 203198541
Test: -
1. Add a standalone system server jar (e.g., by patching
aosp/1906158)
2. Build and drop a module SDK and an APEX.
3. Build a system image from prebuilts.
4. See the odex and vdex files generated in
$ANDROID_PRODUCT_OUT/system/framework/oat/
Change-Id: I8f4eaed10a1053cd560b8583efa12dc495f58db1
... in preparation for adding the support for custom canned fs config
Bug: 209971551
Test: m nothing
Change-Id: I7f2576ff99c65bdb6c9ce4ace61bc783eea2f0d4
The ART AOT exemption only applies to Q/R/S, so module jars that have
min_sdk T+ do not need to follow the module package restriction, even if
they are part of a Q/R/S module (but not loaded on Q/R/S).
Relax the restriction to only apply to jars that have min_sdk before T.
Bug: 208773835
Test: m (runs apex tests)
Change-Id: I2c3ad8984ca05ad763bf6162bd478f93ab4ee650
Inidividual boot or system server jars may have higher min_sdk_version
than the contianing apex, since the runtime respects the values of
min/max_sdk_version; e.g. runtime would not load a boot jar with
higher min_sdk_version. This allows shipping new boot jars via apexes
that target older platforms.
Bug: 190818041
Test: presubmit
Change-Id: I08ec0b4463a17bc8265b948fe09da55eb4e52ac3
Without these errors, the last encountered deapexer would silently be
used. However with PRODUCT_INSTALL_APEXES there will only be deapexer
for installable APEXes, and we can assume only a single installable
APEX exists for each APEX variant, so make it an error if it isn't the
case.
Corresponding to http://ag/15156931.
Test: m nothing SOONG_CONFIG_art_module_source_build=true
Test: m nothing SOONG_CONFIG_art_module_source_build=false
Test: m nothing SOONG_CONFIG_art_module_source_build=false
with installable:true for the com.android.art.debug prebuilt APEX -
check that it fails with an "ambiguous duplicate deapexer" error
Bug: 192006406
Bug: 192542393
Change-Id: I44566fd26b12f82a8a67fe4a69e56303460756d0
We will need the profile when we generate the primary boot image on
device.
Bug: 203492478
Test: Run `banchan com.android.art x86_64 && m` and see
`$ANDROID_PRODUCT_OUT/apex/com.android.art/etc/boot-image.prof`.
Test: Run `lunch aosp_cf_x86_64_phone-userdebug && m` and see both
`$ANDROID_PRODUCT_OUT/apex/com.android.art/etc/boot-image.prof` and
`$ANDROID_PRODUCT_OUT/system/etc/boot-image.prof`, in different
sizes.
Test: Start Cuttlefish with the built image and see both
`/apex/com.android.art/etc/boot-image.prof` and
`/system/etc/boot-image.prof` on device.
Change-Id: Id879dc49b234133dfbb9563814328661a1f4a6c0
Vendor APEXes do not formally support updates outside of the main OTA
process. We should clarify this at build time.
Test: set vendor apex to updatable, observe failure
Test: apex_test.go
Change-Id: Ife8d242a42415ebf00d7dced72c07cda1fde1839
The sh_binary module is not supported the vendor variant. So, even if
there is "vendor: true" in sh_binary module, the image variant is
"image:" instead of "image:vendor.Tiramisu".
But the vendor APEX has vendor variant, so vendor APEX module and
sh_binary module have different variants and the sh_binary cannot be
added to vendor apex.
So the Sh_binaries property is added, and the image variant is removed
at DepsMutator.
Bug: 205065320
Test: make -j40 && sh_binary is added to vendor APEX && install check
Change-Id: I30e2d96a73b45e7b06eff24550542cb010008c41
Perform consistency checks as per http://go/updatable-shared-libraries
These include:
* no attribute can specified can be less than T
* max-device-sdk can't be less than min-device-sdk
* min and max-device-sdk need to be at least the module's
min_sdk_version
* using on-bootclasspath-before implies that the module's
min_sdk_version is at least T or the library has min-device-sdk of at
least T
Test: m nothing
Bug: 191978330
Change-Id: Iaca5cf23fb0bc7e65effb3529c8e829560894c2e
Merged-In: Iaca5cf23fb0bc7e65effb3529c8e829560894c2e
(cherry picked from commit f9e584dd20)
We are expanding PackageManager's supported attributes and this change
enables the developer to define them in the .bp file.
Test: m nothing
Bug: 191978330
Change-Id: I01d579190fb585662086a7fc456f3b33cb89fb57
Merged-In: I01d579190fb585662086a7fc456f3b33cb89fb57
(cherry picked from commit 826863c8e0)
This CL fixes a bug that `required` property of apex modules is not
reflected to the generated Android.mk file.
Bug: N/A
Test: m nothing
Change-Id: I36ccf538882f083f9433bd3eb05b3a5127f3822b
A new property indicates a CLI tool to sign the APEX contents. The value
is stored in apexkeys.txt so that releasetool (sign_target_files_apks)
can use it to invoke the tool to re-sign the apex contents.
Bug: 193504286
Test: m out/soong/apexkeys.txt
com.android.virt.apex line has sign_tool value
Change-Id: Ifd472049b75b5b87c1ed320f5e1190ff65ed54f2
This CL adds more tests to ensure that dexpreopted files are generated
and APEXes depends on them.
Bug: 201371822
Test: m nothing
Change-Id: I407ad54c55cbca9ef78bbd335e95d4b765e174a0
Previous change that was reverted: https://r.android.com/1835222
An additional test was added that revealed a bug in the previous change
which has been fixed here.
Previously, the behavior of the stub_flags and all_flags properties
was different between S and T. In S they contained paths for the
complete set of stub flags and all the encoded flags. However, in T
they contained filtered sets of flags which if used in S would prevent
build checks from detecting possible inconsistencies. Also, a new
signature_patterns property was added in T that is not supported in S.
This change creates separate properties/files for T and reverts the
behavior of the properties/files that were added in S back to how they
behaved in S. The new properties are called filtered_stub_flags and
filtered_flags.
The S and T properties are tagged with the appropriate
supported_build_releases tag to ensure that they are only output when
specifically targeted.
Bug: 197842263
Test: m nothing
Change-Id: I1ce0a3d6623dabf73e32af1a7457b9b444fc3b7c
Previously, the behavior of the stub_flags and all_flags properties
was different between S and T. In S they contained paths for the
complete set of stub flags and all the encoded flags. However, in T
they contained filtered sets of flags which if used in S would prevent
build checks from detecting possible inconsistencies. Also, a new
signature_patterns property was added in T that is not supported in S.
This change creates separate properties/files for T and reverts the
behavior of the properties/files that were added in S back to how they
behaved in S. The new properties are called filtered_stub_flags and
filtered_flags.
The S and T properties are tagged with the appropriate
supported_build_releases tag to ensure that they are only output when
specifically targeted.
Bug: 197842263
Test: m nothing
Change-Id: Iec8b9c539796c507245b69c0aed980fde6d8694f
It will get more logic in upcoming CLs.
Add a property to DeapexerInfo for the APEX name, for use in error
messages.
Test: m nothing
Bug: 192006406
Change-Id: I957f3df8b34543a38cde38768dac93e78132d672
invalid with a message.
This will allow propagating any error from the deapexer module for
prebuilt APEXes to the location where the dex jars get used. It's only
at those points that we can raise errors about not being able to
extract files from the deapexer modules if they are invalid, and this
way we avoid encoding knowledge there about why they may be invalid.
To keep the refactoring limited it intentionally does not change any of
the existing logic for when dexJarFiles are set or not (non-nil vs nil
prior to this change), although there may be opportunity to use this
for more conditions when dex jars aren't available.
The refactoring is also not extended to
dexpreopt.ClassLoaderContextMap.
Test: m nothing
Bug: 192006406
Change-Id: I68986dccd9a9b3fee4d24caa1947ea17a36caedc
Adds a test case to TestJavaStableSdkVersion for the case where a
module uses sdk_version: "core_platform" but is in the list of modules
that can use the legacy version.
This required storing the lookup map in the Config to allow it to be
customized for the test.
Bug: 180399951
Test: m nothing
Change-Id: I404705c3fd8a559649c6ab2624856cf78f49f85c
* In builder.go, share common flags in a module.
* This replaces the sharing of cflags/cppflags/asflags in cc.go.
* A unit test in apex_test.go now fails and is commented out.
It is a failing test hidden by old optimization in cc.go.
* In module.go, expand the reference variable $someflags<n>,
or ${someflags<n>} to keep many existing unit tests work as is.
* The build.ninja size was reduced from 8.1GB to 6.2GB,
for aosp_arm64-eng WITH_TIDY=1 USE_RBE=true,
and from 7.5GB to 5.6GB when USE_RBE is 0.
Content of build.ninja is also more readable and searchable.
Read/write build.ninja times are also reduced,
depending on disk I/O speed.
Test: make WITH_TIDY=1
Change-Id: I17f96adf4844136d52e5d40f57a19d9e290162b7
Compressed APEX files generated by the build system have the .capex
extension. This CL allows us using those .capex files with their actual
suffix.
Bug: 197258691
Test: manual + unit test added
Change-Id: I79173ef942326b48b5e659f1873d80f12b212339
Bug: 197787336
Test: Create an override_apex that uses a different `prebuilts` than its
base. Observe built contents.
Test: apex_test.go
Change-Id: I7666ed6cfe3f2fa5dd81e5f8c1961477dabbbd3c
These are just out/ and out/soong/ and the old names were quite
confusing.
Test: Presubmits.
Merged-In: I999ca62162062f27e449f83ffb00fa580d4065b8
Merged-In: I2fcd80a9e376a6842a06aa104a9f6f5c5e16f8c7
Change-Id: Ib481d2aac40df8da1b74174dc8ec576c1cb48be0
To support different variable bpfs file between mainline module and
non-updatable module(e.g. Android GO). Make bpfs properties overridable.
Test: m
Bug: 190523685
Change-Id: I4c63e35f74230de94b21f3ceb2beb90f0f9ddb11
Soong checks that every module part of a bootclass_fragment provides a
dex boot jar file, even if the module is not a dependency of vendor.img
Using AllowMissingDepdencies() to skip this check allows vendors to be
more aggressive in removing projects from their source tree
Test: In build/soong, run go test ./...
Test: m nothing
Bug: 196306898
Bug: 192616764
Change-Id: I78b062afdc19a6a3251aa8552230f3fcf334b6fb
