If ANDROID_QUIET_BUILD environment variable is set to '1', do not show 20
lines of the environment variables. In addition, for the failing step show
only the step name and output, omitting the command proper (the verbose log
as well as error.log still contains it).
If build succeeds, the output of the build itself consists of a single
line:
```
> m androidmk
[100% NN/NN] <last command>
```
When it fails, the output does not contain sometimes very long command
line:
```
> m androidmk
[ 97% NN/MM] test androidmk
FAILED: <step>
--- FAIL: TestEndToEnd (0.01s)
androidmk_test.go:1025: failed testcase 'prebuilt_etc_TARGET_OUT_ETC'
input:
include $(CLEAR_VARS)
LOCAL_MODULE := etc.test1
LOCAL_MODULE_CLASS := ETC
LOCAL_MODULE_PATH := $(TARGET_OUT_ETC)/foo/bar
include $(BUILD_PREBUILT)
expected:
prebuilt_etc {
name: "etc.test1",
filename: "foo/bar",
}
got:
prebuilt_etc {
name: "etc.test1",
filename: "foo/bar",
}
FAIL
17:50:53 ninja failed with: exit status 1
```
[The related change in build/make/envsetup.sh suppresses timing display
when the same variable is set.]
Change-Id: I4d3c72457de031ff58a324c2fe98f4c1d10f8239
Test: treehugger
Stop writing out ninja files, as they become very large, especially when
multiplied by the number of defined products.
Test: treehugger
Change-Id: Id9529d14040acb72a0188e58b5db2911f142071e
Make the cleanspec & Android.mk runs of kati use much of the same code
and arguments.
Also renames 'Kati' to 'KatiBuild' in many cases, in the the expectation
that we'll have a 'KatiPackage' step in the future.
Use --no_ninja_prelude and move local_pool & _kati_always_build_ into
the combined ninja file. This will reduce the need to re-read makefiles
when Goma is enabled, and it allows us to include more than one
Kati-generated ninja file in the build graph.
Bug: 116968624
Test: build_test on downstream branches
Change-Id: Ibdac689b81f62dc293647fad917d84946f2c3cfa
Add test that cover basic command line usage of soong_zip. -D
is not covered yet as the implementation will be replaced with
one that is also more easily testable in the next patch.
Bug: 116751500
Test: zip_test.go
Change-Id: I5a1bcee74ebc9cb3cf332c36f89bc12c0e807ad2
Move the actual per-product builds out of the main function, combining
the product configuration and build sections. This makes it a lot more
readable.
This ends up saving a lot of FDs -- a -only-config build on aosp with 77
products used to require ~500 FDs, it succeeds with a limit of 150 FDs
now. I'm leaving the code to bump our FD limit though, since 2x the
number of internal products is too close to the 1024 limit for comfort.
Bug: 70370883
Test: prlimit -n150:150 build/soong/build_test.bash -only-config
Change-Id: Ia559beadc19deb8a5b9d50af6e0276e846fd8608
This uses a very large amount of intermediates, but can speed up
subsequent multiproduct_kati runs by not re-reading all the makefiles
unless necessary.
Since we'll no longer have the full build output on every run,
explicitly save away a std_full.log of the log from the last time we ran
Kati.
Test: build/soong/build_test.bash -products aosp_arm -incremental
Change-Id: Iaae580c0e49a2024528617d39b2b477e29d99250
Allows specifying make goals when using multiproduct_kati, for example:
$ multiproduct_kati -only-config dump-products
This makes dumping products with multiproduct_kati easier than before.
Test: multiproduct_kati -only-config -products=full,aosp_arm64 -out=/tmp/p dump-products
Change-Id: If526bd2ba1b7bbadcb230c020202ef9e421e1852
This adds a new status package that merges the running of "actions"
(ninja calls them edges) of multiple tools into one view of the current
state, and gives that to a number of different outputs.
For inputs:
Kati's output parser has been rewritten (and moved) to map onto the
StartAction/FinishAction API. A byproduct of this is that the build
servers should be able to extract errors from Kati better, since they
look like the errors that Ninja used to write.
Ninja is no longer directly connected to the terminal, but its output is
read via the protobuf frontend API, so it's just another tool whose
output becomes merged together.
multiproduct_kati loses its custom status routines, and uses the common
one instead.
For outputs:
The primary output is the ui/terminal.Status type, which along with
ui/terminal.Writer now controls everything about the terminal output.
Today, this doesn't really change any behaviors, but having all terminal
output going through here allows a more complicated (multi-line / full
window) status display in the future.
The tracer acts as an output of the status package, tracing all the
action start / finish events. This replaces reading the .ninja_log file,
so it now properly handles multiple output files from a single action.
A new rotated log file (out/error.log, or out/dist/logs/error.log) just
contains a description of all of the errors that happened during the
current build.
Another new compressed and rotated log file (out/verbose.log.gz, or
out/dist/logs/verbose.log.gz) contains the full verbose (showcommands)
log of every execution run by the build. Since this is now written on
every build, the showcommands argument is now ignored -- if you want to
get the commands run, look at the log file after the build.
Test: m
Test: <built-in tests>
Test: NINJA_ARGS="-t list" m
Test: check the build.trace.gz
Test: check the new log files
Change-Id: If1d8994890d43ef68f65aa10ddd8e6e06dc7013a
When the config loading was changed to using AndroidProducts.mk lists
from soong_ui instead of finding them itself, multiproduct_kati stopped
being able to find all the products. Move the finder initialization
earlier so that we can dump the full list.
Test: build/soong/build_test.bash -only-config
Test: forrest runs of every downstream build_test
Change-Id: I085d40f9008a47b850783499365977a0ff70ac66
On large branches (250+ configurations), the open file count can go
over the default 1024 soft limit on Ubuntu. Many systems have increased
that default, but for the ones that haven't, at least opt into the
hard limit until this can be refactored to use fewer open files.
Bug: 70370883
Test: prlimit -n256:4096 build/soong/build_test.bash -only-config
Test: ulimit -Sn 256; build/soong/build_test.bash -only-config (darwin)
Change-Id: I7a952ffc89a0149ab65b04db1523d348daa6ab3e
Instead of throwing it away (though it would also be in soong.log along
with the verbose messages).
Test: build/soong/build_test.bash with ctx.Println added
Change-Id: I64f8b11ab6752a6be8a5934fb41e30439238e331
Instead of deleting artifacts/logs from successful build (unless -keep
is set), and keeping unsuccessful artifacts, keep all logs and remove
all artifacts (unless -keep is set, then we'll compress the artifacts).
If -dist is passed in, we'll put an archive of the logs into the
DIST_DIR. Even compressed, the rest of the artifacts are still a bit too
large to dist (~5.6GB on AOSP).
Test: build/soong/build_test.bash
Test: build/soong/build_test.bash -keep
Test: build/soong/build_test.bash -dist
Change-Id: I87f55978c18c8ff2e517b8271554ba383003742f
This speeds up dumping make variables from ~380ms using make to ~220ms
using ckati. It also means that we're consistently using the same parser
for builds (with the same .KATI_READONLY/etc extensions).
envsetup.sh (lunch) / other scripts still use make, changing those to go
through soong_ui will be a future change.
Test: m clean; m nothing
Test: USE_GOMA=true m nothing
Test: m PRODUCT-aosp_x86-sdk
Test: m APP-Calculator
Test: build/soong/build_test.bash -only-config (on AOSP and internal master)
Change-Id: I6ca554de8de4955fb869001d06d29969b75751cc
This can make it easier to add build/soong/build_test.sh to continuous
build branches to catch new breaks, but where some products are known to
be broken.
Test: build/soong/build_test.bash --skip-products aosp_arm,aosp_arm64
Change-Id: Ib240570b68957077047ca75b78658429cb8c6a49
The Finder runs roughly 200ms faster than findleaves.py in aosp,
and runs roughly 400ms faster in internal master.
Bug: 64363847
Test: m -j
Change-Id: I62db8dacc90871e913576fe2443021fb1749a483
Adds a -dist argument that will use DIST_DIR to save logs.
Also writes a summary of each std.log to stderr on errors, so that the
error is more likely to show up in the error reporting. This output is
prefixed with "> " to differentiate it from the progress reports from
multiproduct_kati itself.
Test: multiproduct_kati -only-config
Test: DIST_DIR=dist build/soong/build_test.bash -dist (introducing errors)
Change-Id: I5005b5f3f200c876bc004dd9b0e01e7b6edf5be2
It now uses the same output style as ninja, overwriting status lines in
smart terminals.
Test: multiproduct_kati
Test: multiproduct_kati | cat
Change-Id: I8db5198ffdc5ebc5503241ac492379753d92978e
Naming directories according to current date. This makes them easier to
parse when using the tool multiple time.
Also considered:
millis := time.Now().UnixNano() / 1000000
name := fmt.Sprintf("multiproduct-%d", millis)
Also considered putting separators in the number, but it makes for too
long of a directory name.
Test: multiproduct_kati
Change-Id: I10ac6754094653abf5bf11b04efc3c44905d3c8d
We can start removing out directories again in multiproduct_kati, since
the opendir bug has been fixed.
Add --color_warnings to the Kati command line. Since this is different
from Make, take this opportunity to reorder the command line to make
more sense. This wasn't done before because kati forces a regen whenever
the command line changes.
Test: USE_SOONG_UI=true m -j blueprint_tools
Change-Id: I5ad03359fbc16db482722946202297c1ae0f2b90
This creates a rotating build.trace.gz in the out directory that can be
loaded with chrome://tracing. It'll include start and end timings for
make/soong/kati/ninja, and it will import and time-correct the ninja log
files.
Test: m -j; load out/build.trace.gz in chrome://tracing
Test: multiproduct_kati -keep; load out/multiproduct*/build.trace.gz
Change-Id: Ic060fa9515eb88d95dbe16712479dae9dffcf626
This is a replacement for build/tools/kati_all_products.sh using the new
Soong ui/build package. It doesn't even attempt to run ninja, and it can
be configured to run only the product config, or only the product config
and Soong.
For AOSP on my machine:
-only-config 1.4s
-only-soong 1m20s
<none> 13m
Test: multiproduct_kati
Change-Id: Ie3e6e7bdf692e46a8b8eb828f437190f8003500b
