Makes it clear that disabling a module is something that should be
avoided if possible.
Test: m soong_docs
Change-Id: Ief11e705f049edfd53b2af66bdf753f24d32aa71
Product variables structs are generated at runtime to contain only
the properties that apply to the current module. Defaults modules
always contained all product variable properties. Defaults modules
apply their properties to the target module using
proptools.PrependProperties, which prepends structs that have
matching types. Filtered property structs had a different type
and were dropped.
Even after adding filtering to the defaults product variable
properties, defaults modules may contain more property structs
than the target module they are applied to, so the product
variables struct for the defaults module could contain more
fields than the product variables struct for the target module.
Use proptools.PrependMatchingProperties when applying defaults
of product variables instead, which will apply matching properties
across types.
Test: defaults_test.go
Test: variable_test.go
Change-Id: I281bdefef92053457a3b7b65383493a4e7d999df
The zero value check was being done by using reflect.DeepEqual on a
field from the default product variables, but this results in
comparison against a random type when the product variables struct
for the module has been filtered down. Luckily this will always
fail false, which just removed and optimization but left the
behavior correct.
Use reflect.IsZero instead, which is both faster and correct.
Test: variable_test.go
Change-Id: Ieaaa590c2788ca39230e6695397e8ba8d1c6c103
This implements four modules (static/shared/header libraries, and
binaries) for vendor snapshot. These modules will override source
modules if BOARD_VNDK_VERSION != current.
Bug: 65377115
Test: 1) VNDK_SNAPSHOT_BUILD_ARTIFACTS=true m dist vndk vendor-snapshot
Test: 2) install snapshot under source tree
Test: 3) set BOARD_VNDK_VERSION and boot cuttlefish
Change-Id: I24ddb4c3aa6abeab60bbfd31bcbd8753e2592dc5
Vendor snapshot can be captured with "m dist vendor-snapshot". With
vendor snapshot and vndk snapshot, older version of /vendor and newer
version of /system will be able to be built together by setting
BOARD_VNDK_VERSION to past vendor's version.
Only vendor modules under AOSP are to be captured. In detail, modules
under following directories are ignored:
- device/
- vendor/
- hardware/, except for interfaces/, libhardware/, libhardware_legacy/,
and ril/
Test modules (cc_test, etc.) and sanitized modules are also ignored.
Bug: 65377115
Test: m dist vendor-snapshot
Change-Id: If7a2f6de7f36deee936930c0ccf7c47c4a0cebf6
Create a highmem pool based on the total RAM and the number of CPUs,
with an override via the NINJA_HIGHMEM_NUM_JOBS variable. Put
metalava into the highmem pool.
Ninja does not support nested pools, and when goma or RBE is enabled
the maximum ninja parallelism is set very high with local jobs in a
local pool. When both the local pool and highmem pool are enabled,
the total number of local jobs will be as high as the sum of the sizes
of the two pools. Keep the highmem pool limited to 1/16th of the
local pool when remote builds are enabled to try to minimize the
effect while still limiting highmem jobs.
Fixes: 142644983
Test: m nothing, examine pools
Test: m USE_GOMA=true nothing, examine pools
Change-Id: Id79f11f44948992960ac34ecf831dacbe21bd332
Now that ninja uses lstat so that we can get the mtime of the symlink
itself, it's safe to use a real input here rather than an order only
input. This matches how our other install rules work for host files.
Symlinks should be quick to recreate, so I'm not copying the logic to do
order-only dependencies for the device.
Bug: 128577186
Bug: 145278193
Bug: 135515543
Test: m out/target/product/walleye/apex/com.android.art.debug/javalib/arm/boot.art
rm out/soong/host/linux-x86/bin/dex2oatd64
m out/target/product/walleye/apex/com.android.art.debug/javalib/arm/boot.art
Change-Id: Ief5ec752ce0d0216aeecd8e904afc59f3f08ed7d
This relands I12a0f907753fefd1997ab8b4ea2ac331234093cf along with
a fix to blueprint for absolute paths.
Store the current working directory and then change to the root
directory so that all file accesses must go through helpers in
the android package that properly track dependencies.
Change-Id: I24ac485677aa102eec1a2521d16820da6ee1ae77
Fixes: 146437378
Test: m checkbuild
Test: m OUT_DIR=/tmp/out nothing
Store the current working directory and then change to the root
directory so that all file accesses must go through helpers in
the android package that properly track dependencies.
Fixes: 146437378
Test: m checkbuild
Change-Id: I12a0f907753fefd1997ab8b4ea2ac331234093cf
Make LoadHookContext embed a new EarlyModuleContext instead of
BaseModuleContext to reduce its API surface in preparation for
moving it to run during parsing instead of mutators.
Test: m checkbuild
Change-Id: I1cd3ff3b636e7e24991a9184d7521903473e505a
Add OutputFileForModule and OutputFilesForModules to get paths from
OutputFileProducers.
Bug: 122332855
Test: m checkbuild
Change-Id: I2e9aeeb55987742077250390cdb804ba22e79442
Run the imageMutator between osMutator and archMutator so that
different arch variants can be set for the different partitions.
Bug: 142286466
Test: m checkbuild
Change-Id: I65d05714b75aa462bf9816da60fdc2deda4de593
Merged-In: I65d05714b75aa462bf9816da60fdc2deda4de593
(cherry picked from commit 9c8f687584)
Adds HostSupported() method to ModuleBase for use by sdk. Adds
host_supported/device_supported to all prebuilt modules and the
sdk snapshot (where necessary).
Adds TestHostSnapshot to verify the behavior is correct.
Bug: 143678475
Test: m nothing
Change-Id: I8b4d097e46d5804f62cb8f651a83069299a3e639
This build rule is specific to platform APEXes.
For non-platform APEXes, MakeAsSystemExt() is not applied.
This fixes the cases of "soc_specific: true" apexes which fails to
build.
Bug: 139053989
Test: m nothing (soong tests)
Change-Id: I98d0257499647ab41cdaa62a3671d89addbdf833
Exempt-From-Owner-Approval: got +1 before rebasing
Prepare for making the image mutator available to all modules and
moving it between the os and arch mutators by moving it into the
android package and using an interface implemented by the module
types to control it.
Bug: 142286466
Test: No unexpected changes to out/soong/build.ninja
Change-Id: I0dcc9c7b5ec80edffade340c367f6ae4da34151b
If some apex module can be installed for both flattened and unflattened,
flattened apex should be installed to system_ext partition.
So add MakeAsSystemExt func to change the partition from system to
system_ext.
Bug: 139053989
Test: m -j
Change-Id: I3e3430413a9045d96130af99e249567b1a26ed7e
Split the archMutator into two mutators, osMutator to create
android/linux/darwin variants, and archMutator to then further
split them into arm/arm64, etc. When combined with alias
variants in Blueprint this will allow us to depend on the
"android" variant without having to know what architectures
were used to build it.
Test: m checkbuild
Change-Id: I0f51d60fc440cf5ae503904ce7849ec797af5fe2
Create a new type InstallPath that is similar to OutputPath to
differentiate intermediates output paths from installed output
paths.
RelPathString is a poorly defined, undocumented function that is
primarily used to get an install path relative to out/soong to
generate an equivalent install path for Make relative to $(OUT_DIR).
Move it to InstallPath for now, and fix the one remaining user on
OutputPath.
Add a method to create an NDK install path so that ndk_sysroot.go
doesn't have to do it manually with PathForOutput.
Bug: 141877526
Test: m checkbuild
Change-Id: I83c5a0bd1fd6c3dba8d3b6d20d039f64f353ddd5
If InstallInRoot() returns true the module will be installed to
$OUT/root or $OUT/recovery/root.
Bug: 141877526
Test: m checkbuild
Test: no change to build.ninja or Android-${TARGET_PRODUCT}.mk
Test: TestPathForModuleInstall
Change-Id: Id6e435c6019f11eeb5806528fd464dbf220b88d9
Remove the distinction between pctx.StaticRule and
pctx.AndroidStaticRule so that all of the local rules correctly
get assigned to the localPool. Also put Module and Singleton
rules into the localPool.
Test: compare out/soong/build.ninja
Change-Id: Id2bb38eff3c7209340fe55bc9006f00bd3661d81
For each module, take the default product variable properties and
create a new type that contains only the properties that exist in
the current module. This will provide better errors when attemping
to set product variable properties that will never get used for
a module, and fixes errors when a module attempts to use a product
variable that also contains properties that don't apply to the
current module.
Fixes: 79249983
Test: TestProductVariables
Test: m checkbuild
Change-Id: I4dc24f7781b8ce798651cfc8bf3563005a92c13d
"apex_vndk" is a variant of "apex" module.
apex_vndk {
name: "com.android.vndk",
..
}
This rule is used to produce a VNDK APEX per vndk version.
It supports automatic inclusion of vndk libs.
If "vndk_version" property is set, the prebuilt vndk libs of
the version will be included in the apex bundle.
apex_vndk {
name: "com.android.vndk.v29"
vndk_version: "29",
...
}
Otherwise, platform's vndk version is used.
This will replace /system/{lib}/vndk-{ver} and vndk-sp-{ver}.
Bug: 134357236
Bug: 139772411
Test: m com.android.vndk
Change-Id: Ib5c86e625839389670d13c683a7427198ef6852f
This will check if direct deps of android.Module type is "Enabled()".
Previously, this is checked only if a module calls VisitDeps*()
functions in GenerateAndroidBuildActions().
Most modules call VisitDeps*() in GenerateAndroidBuildActions(),
but some modules don't. For example, "apex" module calls
WalkDepsBlueprint() or VisitDirectDepsBlueprint() since it
exceptionally depends on non-android.Module modules.
Therefore, when an apex module depends on disabled(enabled:false) module,
build fails with panic, which is fixed by this change.
Test: m # runs soong tests
Change-Id: I81c5c148bbd51a253d2904690eb76ae7b6df1a0f
java_import can be included in apex via 'java_libs' property.
Bug: 139175488
Test: m (apex_test.go updated)
Change-Id: I3680a47cdac93b0cb2d41da8df3f8defa2bbe670
Allow modules to mark themselves as InstallBypassMake, which will
cause android.PathForModuleInstall to return a path in $OUT_DIR
instead of $OUT_DIR/soong. This can be used for modules that
can handle installation to the final location on their own. The
main blocker for most modules is support for the "required" property,
which requires adding dependencies on the installed location of
other modules.
Bug: 122332855
Test: m checkbuild
Change-Id: I85238d937ff30335167d4b3fec79bbefc734b5e1
Existing modules, either general one or package ones have a single
visibility property, called visibility in general, and
default_visibility on package, that controls access to that module, or
in the case of package sets the default visibility of all modules in
that package. The property is checked and gathered during the similarly
named phases of visibility processing.
The defaults module will be different as it will have two properties.
The first, visibility, will not affect the visibility of the module, it
only affects the visibility of modules that 'extend' the defaults. So,
it will need checking but not parsing. The second property,
defaults_visibility, will affect the visibility of the module and so
will need both checking and parsing.
The current implementation does not handle those cases because:
1) It does not differentiate between the property that affects the
module and those that do not. It checks and gathers all of them with
the last property gathered overriding the rules for the previous
properties.
2) It relies on overriding methods in MethodBase in order to change the
default behavior for the package module. That works because
packageModule embeds ModuleBase but will not work for
DefaultsModuleBase as it does not embed ModuleBase and instead is
embedded alongside it so attempting to override a method in
MethodBase leads to ambiguity.
This change addresses the issues as follows:
1) It adds a new visibility() []string method to get access to the
primary visibility rules, i.e. the ones that affect the module.
2) It adds two fields, 'visibilityPropertyInfo []visibilityProperty'
to provide information about all the properties that need checking,
and 'primaryVisibilityProperty visibilityProperty' to specify the
property that affects the module.
The PackageFactory() and InitAndroidModule(Module) functions are
modified to initialize the fields. The override of the
visibilityProperties() method for packageModule is removed and the
default implementations of visibilityProperties() and visibility()
on ModuleBase return information from the two new fields.
The InitDefaultsModule is updated to also initialize the two new
fields. It uses nil for primaryVisibilityProperty for now but that
will be changed to return defaults_visibility. It also uses the
commonProperties structure created for the defaults directly instead
of having to search for it through properties().
Changed the visibilityProperty to take a pointer to the property that
can be used to retrieve the value rather than a lambda function.
Bug: 130796911
Test: m nothing
Change-Id: Icadd470a5f692a48ec61de02bf3dfde3e2eea2ef
Add a String() method to android.Module for use in debugging. Store
the name and variations of the module as they are mutated.
Test: TestModuleString
Bug: 136473661
Change-Id: I74e393703dcfc96ed4e21ac4a4419a7858b59216
