Add -0 flag to convert files in a zip to stored instead of deflated.
Bug: 69500920
Test: zip2zip_test.go
Change-Id: I6c2b10f3b200a53a3339e3c97a78f65192b309ca
Make the cleanspec & Android.mk runs of kati use much of the same code
and arguments.
Also renames 'Kati' to 'KatiBuild' in many cases, in the the expectation
that we'll have a 'KatiPackage' step in the future.
Use --no_ninja_prelude and move local_pool & _kati_always_build_ into
the combined ninja file. This will reduce the need to re-read makefiles
when Goma is enabled, and it allows us to include more than one
Kati-generated ninja file in the build graph.
Bug: 116968624
Test: build_test on downstream branches
Change-Id: Ibdac689b81f62dc293647fad917d84946f2c3cfa
Add test that cover basic command line usage of soong_zip. -D
is not covered yet as the implementation will be replaced with
one that is also more easily testable in the next patch.
Bug: 116751500
Test: zip_test.go
Change-Id: I5a1bcee74ebc9cb3cf332c36f89bc12c0e807ad2
Move the actual per-product builds out of the main function, combining
the product configuration and build sections. This makes it a lot more
readable.
This ends up saving a lot of FDs -- a -only-config build on aosp with 77
products used to require ~500 FDs, it succeeds with a limit of 150 FDs
now. I'm leaving the code to bump our FD limit though, since 2x the
number of internal products is too close to the 1024 limit for comfort.
Bug: 70370883
Test: prlimit -n150:150 build/soong/build_test.bash -only-config
Change-Id: Ia559beadc19deb8a5b9d50af6e0276e846fd8608
This uses a very large amount of intermediates, but can speed up
subsequent multiproduct_kati runs by not re-reading all the makefiles
unless necessary.
Since we'll no longer have the full build output on every run,
explicitly save away a std_full.log of the log from the last time we ran
Kati.
Test: build/soong/build_test.bash -products aosp_arm -incremental
Change-Id: Iaae580c0e49a2024528617d39b2b477e29d99250
Move some of the more complicated conditional logic out to helper
functions. Use the {{- }} syntax to strip previous whitespace to
allow spacing out the remaning conditionals in the templates.
Test: (cd prebuilts/sdk/current/androidx && pom2bp -regen Android.bp)
Change-Id: I766bd0e1837aa04375f322fbe796d923cd99ecde
Allows specifying make goals when using multiproduct_kati, for example:
$ multiproduct_kati -only-config dump-products
This makes dumping products with multiproduct_kati easier than before.
Test: multiproduct_kati -only-config -products=full,aosp_arm64 -out=/tmp/p dump-products
Change-Id: If526bd2ba1b7bbadcb230c020202ef9e421e1852
merge_zips -stripFile was only considering the name of the file and
ignoring the path. Make it more useful by supporting blueprint style
globs. The previous behavior can be recreated by prefixing with **/.
Bug: 111389216
Test: m checkbuild
Change-Id: I25760fe3f1f77704dd9da9d107d9a38a415d681f
This adds a new status package that merges the running of "actions"
(ninja calls them edges) of multiple tools into one view of the current
state, and gives that to a number of different outputs.
For inputs:
Kati's output parser has been rewritten (and moved) to map onto the
StartAction/FinishAction API. A byproduct of this is that the build
servers should be able to extract errors from Kati better, since they
look like the errors that Ninja used to write.
Ninja is no longer directly connected to the terminal, but its output is
read via the protobuf frontend API, so it's just another tool whose
output becomes merged together.
multiproduct_kati loses its custom status routines, and uses the common
one instead.
For outputs:
The primary output is the ui/terminal.Status type, which along with
ui/terminal.Writer now controls everything about the terminal output.
Today, this doesn't really change any behaviors, but having all terminal
output going through here allows a more complicated (multi-line / full
window) status display in the future.
The tracer acts as an output of the status package, tracing all the
action start / finish events. This replaces reading the .ninja_log file,
so it now properly handles multiple output files from a single action.
A new rotated log file (out/error.log, or out/dist/logs/error.log) just
contains a description of all of the errors that happened during the
current build.
Another new compressed and rotated log file (out/verbose.log.gz, or
out/dist/logs/verbose.log.gz) contains the full verbose (showcommands)
log of every execution run by the build. Since this is now written on
every build, the showcommands argument is now ignored -- if you want to
get the commands run, look at the log file after the build.
Test: m
Test: <built-in tests>
Test: NINJA_ARGS="-t list" m
Test: check the build.trace.gz
Test: check the new log files
Change-Id: If1d8994890d43ef68f65aa10ddd8e6e06dc7013a
manifest property should only be added to aar imports and not jar
imports.
Bug: 110848854
Test: cd prebuilts/sdk/current/support && pom2bp -regen Android.bp
Change-Id: Ifaab81582c87f0af4419f90c3928d0d5d52cec33
When manifest merging in Soong is turned on the modules created
by pom2bp will need to have min_sdk_version specified in order
to prevent manifest_fixer from setting it to the current SDK
level. Read the minSdkVersion attribute out of the
AndroidManifest.xml file inside each .aar file.
Bug: 110848854
Test: cd prebuilts/sdk/current/support && pom2bp -regen Android.bp
Change-Id: Ieaf37ba6eccaf32dc5d3411566335830b1a327ff
This reverts commit 09f4540d66.
Fixes the raw call to net.Listen in the tests to go through the listen()
helper and use the long socket path fallbacks.
Removes the use of timeouts from the tests -- the behaviors being tested
did not rely on timeouts, so removing them will reduce the flakiness if
the build is heavily loading the machine at the same time the test is
running.
Also fixes some potential nil pointer dereferences.
Test: OUT_DIR=<really long> m blueprint_tools
Test: `while .../soong-ui-build-paths/test/test; do sleep 0.01; done` with a build running
Change-Id: I16d44be7517bc415f1c808284088f4ba40df3bfa
This reverts commit c59a92cb1a.
Reason for revert: tests are broken with long OUT_DIRs
They're directly calling net.Listen, and not using the fallback
for long socket names.
Change-Id: Id14cbd499fd9b36c6926b7552d3554340cb0916c
This reverts commit 96c957ae20.
Fixes issues on some machines where the socket in TMPDIR ended up with a
unix domain socket pathname over 107 characters long, which Go will
reject due to underlying limitations in the system calls. If this
happens, we'll fall back to opening the directory, then using
/proc/self/fd/#/<file>, or manually creating a similar symlink in /tmp.
Also fixes some issues on Mac where os.Executable returns the symlink
instead of the underlying file, sending a message over a unix domain
socket will block if the reader isn't reading, and sandboxing was
preventing us from running `ps`.
Test: m blueprint_tools
Test: m blueprint_tools on mac
Change-Id: Ib19ccfe10cb0a79f1476fb1d5cd20ed0495be367
This will allow us to track (and eventually limit) the commands that the
build references via $PATH. These are mostly implicit dependencies on
the host system -- for Linux, we assume something similar to Ubuntu
14.04 with a few extra packages, but this will let us better define
that.
This will not catch uses of tools with absolute paths (/bin/bash, etc),
but most uses shouldn't be relying on absolute path names anyways.
Adds ~400ms on the first startup, ~140ms on subsequent runs, and
overhead of a few ms for every forwarded execution.
Test: m
Test: build/soong/build_test.bash
Test: Add `gcc --version`, TEMPORARY_DISABLE_PATH_RESTRICTIONS=true m
Change-Id: Id68cbb1c8ceef65bbbb10751e83722c7662d2351
When the config loading was changed to using AndroidProducts.mk lists
from soong_ui instead of finding them itself, multiproduct_kati stopped
being able to find all the products. Move the finder initialization
earlier so that we can dump the full list.
Test: build/soong/build_test.bash -only-config
Test: forrest runs of every downstream build_test
Change-Id: I085d40f9008a47b850783499365977a0ff70ac66
protoc dependency files, at least for C++ outputs, uses the form of:
a/b.c \
a/b.h: <dep1> <dep2>...
Ninja will fail the command when it parses a dep file and there's more
than one output file (even though it doesn't care what the output file
name is). So this tool will parse the original file, and output a
version with only a single output file.
Bug: 67329638
Test: NINJA_ARGS="-t deps ...pb.c" m
Test: NINJA_ARGS="-t deps ...srcjar" m
Test: NINJA_ARGS="-t deps ...srcszip" m
Test: Run dep_fixer across all of taimen's dep files, no failures.
Test: Run dep_fixer against the processed files, no changes.
Test: Run androidmk across all of our Android.mk files, inspect the diffs
Change-Id: I4263b7d5faea37285afa6b24dedf5964aa7d19dc
If a static android library lib1 has static_libs: ["lib2"] then the
R.class files for packages in lib2 will be merged into the jar for
lib1. If an app has lib1 in its static_libs it will get the R.class
files from lib2 through lib1, instead of regenerating the R.java
files with numbering that matches the resource table of the app.
Pass transtive static android library dependencies on the aapt2
command line so that aapt2 will always regenerate the R.java
constants for those packages.
Also extract the packages that have R.java files after each aapt2
invocation. This is not necessary for Soong, but is passed to
make to let it force regenerating the packages using
--extra-packages.
Bug: 78300023
Test: m checkbuild
Change-Id: I0f3444af44d2a9f370d1f156c908972f8cc3a1ee
Convert pom2mk to pom2bp that writes out Android.bp files instead
of Android.mk files. pom2mk stays for now until the last users
of it are cleaned up.
Bug: 78300023
Test: cd prebuilts/sdk/current/support && pom2bp -regen Android.mk
Change-Id: I584d63c4228bad32f9e1914b06bde807078d6a55
Add an option to pom2mk to exclude modules by name.
Bug: 78300023
Test: cd prebuilts/sdk/current/support && pom2mk -regen Android.mk -exclude androidx.car_car
Change-Id: I083907ef364384aace524ced81820567f5075d76
pom2mk -regen Android.mk will read the previous arguments out of
Android.mk, rerun pom2mk with those arguments, and write the result
to Android.mk.
Bug: 78300023
Test: cd prebuilts/sdk/current/support && pom2mk -regen Android.mk
Change-Id: Ie8e0f97ae5b87c8078cf8e753489326d80da1896
Specifically, the use case is android-support-car requires some stubs that don't have a Maven pom.
So those stubs can't easily be listed as a dependency in the pom.
However, we do want the dependency to exist when importing to Make and detected by extract_deps.py
Bug: 76692459
Test: m -j blueprint_tools \
&& update_prebuilts.py -s <build_id> \
&& git diff HEAD^ -- fix_dependencies.mk \
&& m -j checkbuild
Change-Id: If546ecf7416580a01bde7b906976ada4b1145253
An upcoming change will stop exporting ProductVariables from Config, so
switch to using existing accessor functions, and add more when they're
missing.
Bug: 76168832
Test: out/soong/build.ninja is identical
Change-Id: Ie0135bdbd2df3258ef3ddb53e5f8fc00aa9b97f7
For easier debugging if there are multiple duplicates
Bug: 76692459
Test: ./update_current.py -x <build-id>
Change-Id: I3079cb4ed1cfd365d792a7b41c9cdb4e7a1e148f
The make javac rule uses [ -s srcjar-list ] to decide whether or
not to run javac. zipsync was putting a trailing "\n" in the
list file, so the file was never empty. There was one case of a
package that contained no source files (so java-source-list was
empty) and had a res directory with an xml file that declared no
resources (so aapt.jar was created but empty). The 1-byte
srcjar-list file caused javac to run and error with:
javac: no source files
Test: m checkbuild
Change-Id: I26b394b66bf81e4f5abbd27e4dc06bee1d9420a8
extract_srcjars.sh uses zipinfo and unzip, which fail with an
error on an empty zip file. Instead of trying to hack around
this (which is hard to make guarantees for since they are
non-hermetic host tools), replace them with a go tool to unzip
a set of zip files into a directory.
Bug: 73885582
Test: m checkbuild
Change-Id: I151fed347ed5196726e36866ffc27bc831799afb
Each Python module will generate a zip file containing source & data
files. The Python binary will collect all its dependencies and use
merge_zips to merge each zip file to create a final .par file.
Test: m -j checkbuild && real examples:
Bug: b/70568913
Change-Id: I9ff232d461d33e1c06026e7dcb5b124bf02c3ce5
Allow native modules to specify use_version_lib, which will make
an android::build::GetBuildNumber() function available. For host
builds, the function will return the build number at the time that
the module was linked. For device modules it will return the
value of the ro.build.version.incremental property.
Bug: 71719137
Test: build_version_test
Test: m build_version_test && touch build/make/core/Makefile build/soong/cc/libbuildversion/tests/build_version_test.cpp && m build_version_test shows different build numbers for binary and library tests.
Change-Id: I6f7d40b7574bb8206866c4e39bad9c710c796e32
Parse the machine-specific symbol tables into a custom symbol table
object and use a single function to find the offset and size of the
symbol in the custom table. Make the functions to convert a
machine-specific symbol table into the custom table also take mocks,
and provide functions to dump mocks from real files. Add tests
that take the mocks and verify they produce the right offset and
size.
Test: cmd/symbol_inject/*_test.go
Change-Id: I25654032b5017dd13a9a1fe29f8b8826ce5bc82b
Some exe files have a .data symbol at the same address as the
soong_build_number symbol. If the .data symbol is after
soong_build_number in the symbol list, symbol_inject would think
the end address was the same as the start address, and use
uint32(-1) as the size.
Use sort.Search to find the first symbol whose section number is
the same as the target symbol, but whose address is higher than
the target symbol.
Test: manual
Change-Id: I51d6e53c6b906222ba68c5cf93be944843e23550
macho symbol table entries are not always in order, which breaks
finding the next symbol to find the size of the target symbol.
Test: build_version_test
Change-Id: I41d1c3c3ff9929694e9ec2b034553d6b7ddef937
The path to the output directory may be arbitrarily long, use
__SBOX_OUT_DIR__ in the list of output files passed to sbox
to avoid expanding it multiple times in the command line.
Fixes:
ninja: fatal: posix_spawn: Argument list too long
09:40:14 ninja failed with: exit status 1
when building libchrome with a long OUT or OUT_DIR_COMMON_BASE.
Bug: 73726635
Test: m checkbuild
Change-Id: I59024b2164287c8e531711afd9273b692ce9c28a
