This change is in preparation for removing testing.T from TestResult.
Bug: 181070625
Test: m nothing
Change-Id: Ib51c7d4e5efdcbe0652df10b66140058a8bfa471
It is no longer necessary to use preparers in a specific order now that
the test infrastructure enforces a consistent registration order.
So, this change:
* Sorts preparers alphabetically to make them easier to maintain.
* Creates a single visiblity preparer for all the visibility mutators.
* Adds PrepareForTestWithPackageModule
Bug: 181070625
Bug: 181953909
Test: m nothing
Change-Id: I9e65dd182be664d8d0d5db7ccc0b63fa315129c8
Adds support for customizing the error handling behavior of test
fixtures and converts a test to use it.
Bug: 181070625
Test: m nothing
Change-Id: I736c41311819d57d8688fc3b0e021dbb50c491c1
Prepare for using Config when adding singletons by passing
Config to NewTestContext and NewContext instead of to ctx.Register.
This will enable a followup change to store SingletonMakeVarsProviders
registered on the Context in the Config, which is necessary to run
multiple tests in parallel without data races.
Test: all soong tests
Change-Id: Id229629a4e42ff4487d317241673837726c075fc
Expands the error to suggest a potential fix, giving the package path
for the module that needs visiblity.
Test: go test soong tests
Bug: 168926331
Change-Id: Ie95dec03f5e2c3190bfaed1f0e5789eeb0ab1878
This reverts commit 323dc60712.
Reason for revert: Possible cause of test instability
Bug: 170513220
Test: soong tests
Change-Id: Iee168e9fbb4210569e6cffcc23e60d111403abb8
Putting t.Parallel() in each test makes them run in parallel.
Additional t.Parallel() could be added to each subtest, although
that requires making a local copy of the loop variable for
table driven tests.
Test: m checkbuild
Change-Id: I5d9869ead441093f4d7c5757f2447385333a95a4
Some mainline modules provide an `sdk` and one or more set of
module_exports. When the snapshots are unpacked into separate prebuilts
directories (one per snapshot) then any dependencies from a member of
one snapshot to a member of another may require the latter to have
additional visibility rules.
Previously, these rules had to be added to each source module. This
change allows additional visibility rules to be specified on the
sdk/module_exports that are added to all the prebuilts in its snapshot.
Bug: 155921753
Bug: 168301990
Test: m nothing
Change-Id: Ia3eacb5749981f04770ae9872a8013e43c5c6ef1
Visibility rules can be 'inherited' in one of two ways. Either from
defaults or from a module that called ctx.CreateModule(...).
Previously, in both cases the inheriting module could only append
additional visibility rules to the end of the inherited rules. That
made it impossible to restrict the visibility by removing or ignore
inherited rules.
The //visibility:override rectifies that by allowing the inheriting
module to ignore all the rules that they would have inherited. It can
only go at the beginning of a list of rules specified in a module but
after defaults are applied it can end up in the middle of a list of
rules. In that case it behaves as if all the rules up to and including
the //visibility:override rule were discarded.
It can be used with //visibility:private to override
//visibility:public and vice versa.
Bug: 155787200
Test: m nothing
Change-Id: I8a9c9c5a1bdceaee387c08864ae2b34629e0d46f
Previously, the only way for a module type to create modules (other
than defining its own mutator) was to register a LoadHook. However,
that is called before defaults are applied so any properties used in
that hook cannot take advantage of defaults, e.g. java_sdk_library
cannot use defaults to set its sdk_version property and have that
affect its child modules.
This change adds a new SetDefaultableHook() to DefaultableModule to
register a hook that is called after any defaults have been applied.
Also adds some tests to ensure that errors in the visibility property
introduced in a DefaultableHook are reported in the gather phase of
visibility processing.
A follow up change will switch java_sdk_library to use that instead
of the AddLoadHook() mechanism.
Bug: 155295806
Test: m checkapi
Change-Id: I13df3115f9e225f7324b6725eaeb16a78cc2538a
While it is invalid to mix //visibility:public with other rules in the
visibility property in a .bp file tt was possible, by overriding
defaults, to have //visibility:public mixed in with other rules in the
effective visibility rules. That caused problems when those effective
rules were used in an sdk snapshot.
This change replaces any set of rules that include //visibility:public
with just the //visibility:public rule. That simplifies those rules,
making them cheaper to process and ensures that the effective rules are
valid in the visibility property.
Adding test support required some refactoring of the
effectiveVisibilityRules(BaseModuleContext, ...) and underlying methods
to take a Config instead of BaseModuleContext as the tests do not have
access to BaseModuleContext.
Bug: 142935992
Test: m nothing - new tests failed without change, work with it
Add dex2oat to art-module-host-exports, build it and check the
generated Android.bp file in the snapshot to ensure the
visibility property for the dex2oat prebuilt does not mix
//visibility:public with other rules.
Change-Id: I08e7f0dcb40838d426fe88fedf69eae27b77473c
When both prebuilt and source versions of a module are present in the
build an implicit dependency is added from source -> prebuilt. This
change excludes that dependency from visibility enforcement as it
provides no value and would otherwise require an sdk snapshot to
rewrite the visibility of the generated prebuilt modules which would
be complicated.
The rewriting would include:
* Detecting //visibility:public and just passing that straight through.
* Detecting //visibility:private and replacing that with the location
of the source.
* Otherwise, adding the location of the source to the visibility
property.
This adds a general mechanism to allow any dependency to be excluded
from visibility enforcement by simply using a tag that implements
the ExcludeFromVisibilityEnforcementTag interface.
Bug: 142940300
Test: m nothing
Change-Id: I0668ff5aa798152d17faf3aac1bb8eff8d6350c3
The filesystem object was available through ModuleContext.Fs(), but
gives too much access to the filesystem without enforicing correct
dependencies. In order to support sandboxing the soong_build
process move the filesystem into the Config. The next change will
make it private.
Bug: 146437378
Test: all Soong tests
Change-Id: I5d3ae9108f120fd335b21efd612aefa078378813
Exports visibility and package mutator registration functions so they
can be used in sdk testing. Updates sdk test to support visibility and
package modules.
Adds EffectiveVisibility(...)[]string function to make the effective
visibility rules available to sdk snapshot creation.
Extracts compositeRule.Strings() []string from compositeRule.String()
method so that it can be used by above func.
Adds visibility property to sdk snapshot and prebuilt modules along
with a test to ensure it works properly.
Adds dir parameter to CheckSnapshot so that it can check the snapshot
generated for a non-root package. That is required in order to ensure
that visibility of :__subpackages__ on a source module in package
<pkg> is resolved to an effective visibility of
//<pkg>:__subpackages__ on its corresponding prebuilt.
Test: m conscrypt-module-sdk
Bug: 143678475
Change-Id: Icaacac5b9c04726d28e6fec93e49715ac45df7f4
Avoid having to pass ModuleFactoryAdaptor to every call to
RegisterModuleType in a test by wrapping RegisterModuleType.
Test: all soong tests
Change-Id: If8847d16487de0479cc3020b728256922b3cadba
Extracted some common code used by visibility_test.go and
neverallow_test.go into a new function CheckErrorsAgainstExpectations
in testing.go.
Bug: 138428610
Test: m nothing
Change-Id: I6996fa52968c387e38b4a67ffa59cd07c2d524e8
Merged-In: Iafbadf12c6ffdc4d9128fcfe7f15792df5cfd020
Enhances the visibility mechanism to use the default_visibility
property of the closest ancestor package that has the property
specified.
Bug: 133290645
Test: m droid
Change-Id: I7248e9034a73894ac8d514f913316438c4d7c079
Adds a package module type with a default_visibility property. The
package module type can only be specified once per package.
Bug: 133290645
Test: m droid
Change-Id: Ibb2fb499c9ea88ecaa662d3cd2cbde478e4b9a4b
There is no need to create a separate buildDir for each test
file, use TestMain to create a global one for the package.
Test: all soong tests
Change-Id: I435ee7aa88b7e0bb8ccc1ba79f82833a7accf3e9
Add an empty GenerateAndroidBuildActiosn to DefaultsModuleBase
so that every defaults module doesn't need to provide one. This
will also allow adding an implementation in the next patch.
Test: m checkbuild
Change-Id: I13554bdb3a287c2f18e1efab74d4f08a1ba8620c
However only allow it when they are merged from different defaults.
Extend the tests to cover that and other cases with visibilities in
defaults.
Also avoid dumping the whole visibility spec in the error message when a
visibility check fails, because it gets noisy for long visibility lists, and
can be confusing when //visibility:public gets merged with other visibility
rules.
Test: Soong self test
Bug: 112158820
Bug: 130796911
Change-Id: I242513975a3f824b9ea2eab5b94b194b9af2481b
Implementation uploaded for review. Includes unit tests but does not
yet handle prebuilts, that will come in a future change once some
more general issues with prebuilts and namespaces is resolved.
See README.md#Visibility for details of what this does and how to use
it.
Bug: 112158820
Test: add visibility rules for core library modules, make core-tests
Change-Id: I8ec980554398ad6f2d42043ce518f811a35da679
