Allow install-clean as an alias for installclean and data-clean as
an alias for dataclean.
Test: m install-clean
Change-Id: I9c97d60572a524ad68caecd26d52bfb987468075
As suggested in b/118390303#comment18, let me run
"goma_ctl.py ensure_start" in soong UI.
Bug: 118390303
Test: stop compiler_proxy, and execute following command:
Test: USE_GOMA=true lunch aosp_arm-eng
Test: and confirms compiler_proxy is running.
Change-Id: I859daae6ae2399c5b6bce2fafd874dfdb7c6aae0
Signed-off-by: Yoshisato Yanagisawa <yyanagisawa@google.com>
The idea is that we'd move the installation and packaging tasks over to
it, using data from Soong & the Kati reading Android.mk files.
This would allow us to make more fundamental changes about how we
package things without having to adjust makefiles throughout the tree.
Possible use cases:
* Moving some information from Soong's Android.mk output to a file read
by the packaging step may allow us to read the Android.mk files less
often, speeding up builds.
* Refactoring our current two-stage ASAN builds to run the Kati build
step twice, writing into different object directories, then have a
single packaging step that reads both outputs. Soong already has the
capability of writing out a single ninja file with all the asan
combinations.
* Running two build steps, one building the system-related modules
using a "generic" device configuration, and one building the vendor
modules using a specific device configuration. This could enforce a
GSI/mainline system vs vendor split in a single build invocation.
* If all installation is through this tool, it will be much easier to
track what should no longer be installed on an incremental build,
reducing the need for installclean.
* Changing PRODUCT_PACKAGES should be a much faster operation, which
means we could keep track of local additions to the images. Then
`mma` would be more persistent, instead of installing something once,
then never updating it again.
Eventually we plan on switching from Kati to something Go-based, but
this is a more incremental approach while we clean up everything else.
Currently, this just moves the dist-for-goal handling over to the
packaging step, so that we don't need to read Android.mk files when
DIST_DIR changes, or we switch between dist vs not.
Bug: 116968624
Bug: 117463001
Test: m nothing
Change-Id: Idec5ac6f7c7475397ba0fb65bd3785128a7517df
Make the cleanspec & Android.mk runs of kati use much of the same code
and arguments.
Also renames 'Kati' to 'KatiBuild' in many cases, in the the expectation
that we'll have a 'KatiPackage' step in the future.
Use --no_ninja_prelude and move local_pool & _kati_always_build_ into
the combined ninja file. This will reduce the need to re-read makefiles
when Goma is enabled, and it allows us to include more than one
Kati-generated ninja file in the build graph.
Bug: 116968624
Test: build_test on downstream branches
Change-Id: Ibdac689b81f62dc293647fad917d84946f2c3cfa
Check for the presence of Android.mk or CleanSpec.mk, which
are somewhat common problems.
Bug: 113147143
Test: m (with and without files present)
Change-Id: I31cf60c325e7f6c6fce7aec54712c1cb802055c2
This adds a new status package that merges the running of "actions"
(ninja calls them edges) of multiple tools into one view of the current
state, and gives that to a number of different outputs.
For inputs:
Kati's output parser has been rewritten (and moved) to map onto the
StartAction/FinishAction API. A byproduct of this is that the build
servers should be able to extract errors from Kati better, since they
look like the errors that Ninja used to write.
Ninja is no longer directly connected to the terminal, but its output is
read via the protobuf frontend API, so it's just another tool whose
output becomes merged together.
multiproduct_kati loses its custom status routines, and uses the common
one instead.
For outputs:
The primary output is the ui/terminal.Status type, which along with
ui/terminal.Writer now controls everything about the terminal output.
Today, this doesn't really change any behaviors, but having all terminal
output going through here allows a more complicated (multi-line / full
window) status display in the future.
The tracer acts as an output of the status package, tracing all the
action start / finish events. This replaces reading the .ninja_log file,
so it now properly handles multiple output files from a single action.
A new rotated log file (out/error.log, or out/dist/logs/error.log) just
contains a description of all of the errors that happened during the
current build.
Another new compressed and rotated log file (out/verbose.log.gz, or
out/dist/logs/verbose.log.gz) contains the full verbose (showcommands)
log of every execution run by the build. Since this is now written on
every build, the showcommands argument is now ignored -- if you want to
get the commands run, look at the log file after the build.
Test: m
Test: <built-in tests>
Test: NINJA_ARGS="-t list" m
Test: check the build.trace.gz
Test: check the new log files
Change-Id: If1d8994890d43ef68f65aa10ddd8e6e06dc7013a
This matches the change to blueprint's blueprint_impl.bash:
https://github.com/google/blueprint/pull/213
It allows us to run bpglob during the two bootstrap phases, so we're
never running minibp or the primary builder in a later phase than
normal.
Also removes the dependency on out/soong/build.ninja from the main
phase, since it's never generated by the main phase anymore, and is
tripping the dangling dependency checks.
Bug: 73646380
Test: m nothing
Test: rm frameworks/base/core/java/android/content/pm/dex/ArtManager.java
Test: m nothing (soong re-runs)
Change-Id: Ia3952d015ad6091ad5a841f555acda78c9390e84
This reverts commit 09f4540d66.
Fixes the raw call to net.Listen in the tests to go through the listen()
helper and use the long socket path fallbacks.
Removes the use of timeouts from the tests -- the behaviors being tested
did not rely on timeouts, so removing them will reduce the flakiness if
the build is heavily loading the machine at the same time the test is
running.
Also fixes some potential nil pointer dereferences.
Test: OUT_DIR=<really long> m blueprint_tools
Test: `while .../soong-ui-build-paths/test/test; do sleep 0.01; done` with a build running
Change-Id: I16d44be7517bc415f1c808284088f4ba40df3bfa
This reverts commit c59a92cb1a.
Reason for revert: tests are broken with long OUT_DIRs
They're directly calling net.Listen, and not using the fallback
for long socket names.
Change-Id: Id14cbd499fd9b36c6926b7552d3554340cb0916c
This reverts commit 96c957ae20.
Fixes issues on some machines where the socket in TMPDIR ended up with a
unix domain socket pathname over 107 characters long, which Go will
reject due to underlying limitations in the system calls. If this
happens, we'll fall back to opening the directory, then using
/proc/self/fd/#/<file>, or manually creating a similar symlink in /tmp.
Also fixes some issues on Mac where os.Executable returns the symlink
instead of the underlying file, sending a message over a unix domain
socket will block if the reader isn't reading, and sandboxing was
preventing us from running `ps`.
Test: m blueprint_tools
Test: m blueprint_tools on mac
Change-Id: Ib19ccfe10cb0a79f1476fb1d5cd20ed0495be367
This will allow us to track (and eventually limit) the commands that the
build references via $PATH. These are mostly implicit dependencies on
the host system -- for Linux, we assume something similar to Ubuntu
14.04 with a few extra packages, but this will let us better define
that.
This will not catch uses of tools with absolute paths (/bin/bash, etc),
but most uses shouldn't be relying on absolute path names anyways.
Adds ~400ms on the first startup, ~140ms on subsequent runs, and
overhead of a few ms for every forwarded execution.
Test: m
Test: build/soong/build_test.bash
Test: Add `gcc --version`, TEMPORARY_DISABLE_PATH_RESTRICTIONS=true m
Change-Id: Id68cbb1c8ceef65bbbb10751e83722c7662d2351
This reverts commit fb941913a3.
Reapplies I4933187e8b72f2ef0c32d18ffea756e2c6fa417c with fixes
to disable the check for mac builds, where many modules are
disabled and the check is just going to cause more problems.
Test: m checkbuild
Change-Id: If6712c90ececd5d015fcdcdeefe0c3d4f5590711
Get a list of leaf nodes in the dependency graph
from ninja, and make sure none of them are in the
output directory. This ensures that there are no
rules that depend on a file in the output directory
that doesn't have rule to generate it. The check
will catch a common set of build failures where
a rule to generate a file is deleted (either by
deleting a module in an Android.mk file, or by
modifying the build system incorrectly). These
failures are often not caught by a local incremental
build because the previously built files are still
present in the output directory.
Bug: 36843214
Bug: 68062417
Test: manual
Change-Id: I4933187e8b72f2ef0c32d18ffea756e2c6fa417c
This speeds up dumping make variables from ~380ms using make to ~220ms
using ckati. It also means that we're consistently using the same parser
for builds (with the same .KATI_READONLY/etc extensions).
envsetup.sh (lunch) / other scripts still use make, changing those to go
through soong_ui will be a future change.
Test: m clean; m nothing
Test: USE_GOMA=true m nothing
Test: m PRODUCT-aosp_x86-sdk
Test: m APP-Calculator
Test: build/soong/build_test.bash -only-config (on AOSP and internal master)
Change-Id: I6ca554de8de4955fb869001d06d29969b75751cc
We can call directly into the blueprint bootstrap.bash using values that
soong_ui has already calculated.
Instead of calling into blueprint.bash, build minibp with microfactory,
and directly run ninja. This allows us to get individual tracing data
from each component.
Test: m -j blueprint_tools
Test: m clean; m -j blueprint_tools
Change-Id: I2239943c9a8a3ad6e1a40fa0dc914421f4b5202c
The Finder runs roughly 200ms faster than findleaves.py in aosp,
and runs roughly 400ms faster in internal master.
Bug: 64363847
Test: m -j
Change-Id: I62db8dacc90871e913576fe2443021fb1749a483
This way we only have one way to start a build, which always has logging
/ tracing / etc, even if we don't need Kati.
There's two ways to use this:
As a direct replacement for mkdir out; cd out; ../bootstrap.bash;
./soong -- as long as --skip-make is always passed, we'll never run
Kati, and Soong will run outside of it's "make" mode. This preserves
most of the speed, and allows full user control over the Soong
configuration.
A (experimental, dangerous) way to temporarily bypass the product
variable and kati steps of a build. As long as a user is sure that
nothing has changed from the last build, and they know exactly which
Ninja targets they want to build (which may not be the same as the
arguments normally passed to 'm'), this can lead to shorter build
startup times.
Test: rm -rf out; m --skip-make libc
Test: rm -rf out; m libc; m --skip-make libc
Test: rm -rf out; mkdir out; cd out; ../bootstrap.bash; ./soong libc
Test: build/soong/scripts/build-ndk-prebuilts.sh
Change-Id: Ic0f91167b5779dba3f248a379fbaac67a75a946e
The build now uses a prebuilt javac binary distributed with the
source, checking the host java version is no longer required.
Reapplies Ieef83481d0e6d68371bbd8a422f870ffe2bbb428 after updating
some more manifests to include the prebuilts.
Test: m -j checkbuild
Bug: 62956999
Change-Id: I774dbb75c8ae2ff1a990423a3827c77886e44779
(cherry picked from commit c6f07f00da)
The build now uses a prebuilt javac binary distributed with the
source, checking the host java version is no longer required.
Test: m -j checkbuild
Bug: 62956999
Change-Id: Ieef83481d0e6d68371bbd8a422f870ffe2bbb428
This causes Soong to put the outputs of each genrule into a temporary
location and copy the declared outputs back to the output directory.
This gets the process closer to having an actual sandbox.
Bug: 35562758
Test: make
Change-Id: I8048fbf1a3899a86fb99d71b60669b6633b07b3e
This speeds things up a little bit, but the major win is that we don't
need to recursively call into the build during the auto installclean.
Test: m -j installclean
Test: m -j dataclean
Change-Id: I09ded8dbd8a2015c7848bc0042dfd3adad1b31c9
This way kati won't need to be run as often (either initially, or when
switching products with the same device).
Bug: 35970961
Test: m clean; m -j blueprint_tools; m -j blueprint_tools; m -j blueprint_tools
Test: lunch aosp_arm-eng; m -j blueprint_tools; lunch full-eng; m -j blueprint_tools; <repeat>
Change-Id: Ie9fca3c8f1dd412459ea47c7090c7c5fdb0bcf6e
When kati keeps state around, it has to regenerate the ninja file every
time the state is changed. So move the java version checking into
soong_ui, where we can parallelize it with other operations instead of
only checking it occasionally.
Bug: 35970961
Test: Put java7 in PATH, m -j
Test: Put java8-google in PATH, m -j
Test: Put a space in TOP, m -j
Test: OUT_DIR=<case-preserving fs> m -j
Test: OUT_DIR=<path with space> m -j
Test: DIST_DIR=<path with sapce> m -j
Change-Id: I3245c8dd6d856240d17d54cb05d593dc9df71a27
So that we don't have to load up all the makefile state just to remove
the output directory.
Starting from a completely empty out directory:
kati: 16s
soong_ui: 2.0s
From a minimal out directory (m -j blueprint_tools):
kati: 3.8s
soong_ui: 0.4s
Test: m -j clean
Test: m -j clobber
Change-Id: Ibeec6fbfa29387750342a752a55336caca4b3992
Wrap os/exec.Cmd to use our Context and Config interfaces for automatic
logging and error handling. It also simplifies environment modification
based on the Config's environment.
This also adds sandboxing on Macs using sandbox-exec. A simple profile
is provided that only logs on violations, though multiproduct_kati on
AOSP has no violations. This isn't applied to ninja, only make / soong /
kati to start with. I measured <5% time increase in reading all
makefiles, and no noticable difference when kati doesn't regenerate.
I'd like to spin up a process to dump violation logs into our log file,
but the log reporting changed over the range of Mac versions that we
support, so that's going to be more complicated. Opening Console.app
works in all cases if you're local -- just search/filter for sandbox.
Linux sandboxing will be implemented later -- the sandbox definition is
opaque enough to support a different implementation.
Test: multiproduct_kati on AOSP master on Mac
Change-Id: I7046229333d0dcc8f426a493e0f7380828879f17
Right now this mostly just copies what Make is doing in
build/core/ninja.mk and build/core/soong.mk. The only major feature it
adds is a rotating log file with some verbose logging.
There is one major functional difference -- you cannot override random
Make variables during the Make phase anymore. The environment variable
is set, and if Make uses ?= or the equivalent, it can still use those
variables. We already made this change for Kati, which also loads all of
the same code and actually does the build, so it has been half-removed
for a while.
The only "UI" this implements is what I'll call "Make Emulation" mode --
it's expected that current command lines will continue working, and
we'll explore alternate user interfaces later.
We're still using Make as a wrapper, but all it does is call into this
single Go program, it won't even load the product configuration. Once
this is default, we can start moving individual users over to using this
directly (still in Make emulation mode), skipping the Make wrapper.
Ideas for the future:
* Generating trace files showing time spent in Make/Kati/Soong/Ninja
(also importing ninja traces into the same stream). I had this working
in a previous version of this patch, but removed it to keep the size
down and focus on the current features.
* More intelligent SIGALRM handling, once we fully remove the Make
wrapper (which hides the SIGALRM)
* Reading the experimental binary output stream from Ninja, so that we
can always save the verbose log even if we're not printing it out to
the console
Test: USE_SOONG_UI=true m -j blueprint_tools
Change-Id: I884327b9a8ae24499eb6c56f6e1ad26df1cfa4e4
