These are needed to add staging-mode to some throttled builds. See go/roboleaf-launch-tests for details.
Test: m nothing
Test: build/soong/build_test.bash --bazel-mode-staging
Change-Id: I456ef80fb9c50579a28fba3dbd184d4e4653dde7
This helps with incrementality a lot: the symlink forest must depend on
almost every directory in the source tree so that if a new file is added
or removed from *anywhere*, it is regenerated.
Previously, we couldn't do this without invoking bp2build, which is
quite wasteful because bp2build takes way more time than the symlink
forest creation, even though we do the latter in a very suboptimal way
at the moment.
This means that if a source file is added or removed (which does not
affect globs), we don't pay the cost of bp2build anymore.
Also refactored symlink_forest.go on the side. Too much state was being
passed around in arguments.
This change reimplements aosp/2263423 ; the semantics of not touching an
output file is the exact same as order-only inputs and the latter is a
bit fewer lines of code.
Test: Presubmits.
Change-Id: I565c580df8a01bacf175d56747c3f50743d4a4d4
- the generating rule has `restat=true`, so its output need not have a newer timestamp to prevent it from rerunning on subsequent ninja invocations
- its dependents (so far only bootstrap.ninja's "build build.ninja") already have proper dependencies in the depfile, namely
1. Android.bp.list,
2. entries in Android.bp.list,
3. bazel.list and
4. entries in bazel.list
This change prevents symlink related changes from spuriously retriggering build.ninja
Change-Id: I93f1fea7054dfbfc7c13ece34d2d1f07a81bbe07
Test: manually verifying bazel analysis is triggered only under the right set of CUJs using build/bazel/ci/incremental_build.py
Bug: b/239044236
This is okay because Blueprint already adds the module files to the
.d file of its output, so until now, they were duplicated.
Test: presubmits
Change-Id: I1bb75c5124aadd1703f3d150948dd7540ba772be
Bug: b/255309129
Test: `lunch aosp_x86-userdebug` and `export NINJA_ARGS="-d explain"`
Then do the following:
1) rm -rf out && m bp2build
2) touch bionic/libc && m bp2build
3) ALLOW_MISSING_DEPENDENCIES=true m bp2build
After each step above observe the following two
a)`stat out/soong/soong.environment.used.bp2build | grep Modify`
b)`stat out/soong/bp2build_workspace_marker | grep Modify`
Verified:
step 2 changes only (b) - prior to this CL, it'd change (a) as well
step 3 still changes both (as expected)
Change-Id: I98a94878a14e19043f448b0904fc67d5d1dc9733
Improves some error messages that would have given little/no information
Bug: 254650145
Test: relevant unit tests
Test: Induce errors and check metrics proto
Change-Id: Ife6116af74af6e62c2f8ae8774e53c28178fb8d0
update and create bundle config pb python library
update config.pb file to the source of truth:
google3/third_party/java_src/android_appbundle/bundletool/schemas/proto/config.proto
current config.pb is stale and needs update.
Also, add a python library host soong module config_proto, so that it
can be used by other python code.
BUG: b/240288941
TETS: tested along with primary_train_build_worker that reuse
BundleConfig.pb
Change-Id: I426a5cb7ec42573ed2110494c50813abc0a96296
This is to use bazel to build targets that are being prepared for an
incipient release to the prod mode allowlist.
Bug: 254265047
Test: m nothing
Test: m nothing --bazel-mode-dev
Test: m nothing --bazel-mode-staging
Change-Id: Ic78a59cf51dba83ef1ac26483586560ea9b24aaf
Bug: b/239044089
Test: run build/bazel/ci/incremental_build --bazel-mode com.android.adbd and see the additional metrics in summary.csv
Change-Id: I2c3b9cead2ee43c700a9ad52e669a64aab1499ce
The generated Bazel workspace will only contain api specific targets.
This is feasible since these targets do not have any cross dependencies
with the targets in the bp2build workspace
The advantages of a new mode are
1. Does not pollute bp2build workspace with api targets
2. Does not block api targets with the current allowlist conversion
mechansims in bp2build
(In the future we might want to combine these two workspaces)
A Soong module type will generate a Bazel target if it implements
ApiProvider interface
Test: m apigen
Test: m nothing
Change-Id: I69c57ca6539f932e0ad554ce84a87fb7936fdba0
The logic here has diverged from the logic in bundletool and resulted in
the wrong APEX variant being chosen for a 64bit-only product.
Bug: 246476965
Test: go test .
Change-Id: Ic3b067e98a65146cfa399e7c9b231f397e51c23e
Prior to this `getToc` could return (nil, nil) which caused a crash
later.
Test: m extract_apks && out/host/linux-x86/bin/extract_apks \
-o foo.apks -sdk-version=33 \
-abis=X86_64,X86,ARM64_V8A,ARMEABI_V7A \
-screen-densities=all -extract-single test.apks
where test.apks comes from ag/19673938
Test: vendor/google/modules/ArtGoogle/build-with-prebuilt-art-module.sh droid
with prebuilts in place for cf_x86_64_phone_prebuilt_art-userdebug
chained build on git_master_throttled
Bug: 246562532
Change-Id: Id849371b4dea04f08c07b201c8a466735b5b0994
This environment variable has been out of use for some time. It used to
control Bazel-as-executor, which has been removed from Bazel for several
releases.
Bug: 243077098
Test: Treehugger
Change-Id: I4edfb5f3574c369a16547ea06ba780293c37ecb3
Previous behavior:
- Packge not listed in bp2buildKeepExistingBuildFile:
- Use bp2build generated build file
- Package listed in bp2buildKeepExistingBuildFile:
- Use handcrafted build file even if there were allowlisted bp2build
modules in the same package.
- Package listed in bp2buildKeepExistingBuildFile and a soong module has
a bp2build: { label } attribute:
- Merge the handcrafted and bp2build generated build files
New behavior:
- Packge not listed in bp2buildKeepExistingBuildFile:
- Use bp2build generated build file
- Package listed in bp2buildKeepExistingBuildFile:
- Merge with bp2build generated build file.
Bug: 234167862
Test: ./build/bazel/ci/bp2build.sh
Change-Id: Ifbaf4f8f0f5158b5b2bd6d534eb2311e2e5f399b
This allows "bazel mixed builds prod mode", in additional to reworking
the mechanism in which mixed builds dev mode is enabled.
As a followup, CI scripts will be migrated to use the new flags, as
USE_BAZEL_ANALYSIS=1 is deprecated.
Test: Manually ran --bazel-mode with an allowlist verifying that the
module alone was enabled
Test: Manually verified --bazel-mode and --bazel-mode-dev cause a build
failure
Change-Id: If0d34360e60452f428b05828f4ec7596b7cb619a
This refactoring prepares for introduction of bazel prod mode, an
alternative mechanism for mixed builds allowlist handling.
* Decide bazel-mode as close to soong_build main as possible
* BazelContext itself decides whether a module is allowlisted
* Separate bp2build and mixed build allowlist
Test: m nothing, manually verified all modules are mixed build disabled
(via metrics)
Test: USE_BAZEL_ANALYSIS=1 m nothing, manually verified that mixed build
disabled/enabled modules are identical before and after change.
Change-Id: I0f55d8b85000cb4a871a099edc6d7d868d7df509
deprecated flag that simply adds 5s to a build
the `ctx.Done()` signal handling is unnecessary because of clean-up hooks already in place
Test: m libc
Bug: N/A
Change-Id: Ica12d727264af1e61e97393bc8cbeba9f78cbc83
- Top-level trace for all soong_build runs
- Includes adding Peek() to OncePer because not all soong_build
invocations have GenerateBuildActions run.
- A trace per mutator invocation
Test: m && build/bazel/scripts/print_analysis_metrics.py
Change-Id: Ief5c04630484fb38ec7e3757de45c7dc294d3b3c
This is to generally warn Google devs about lack of LOAS creds.
Given the switch to RBE, lack of LOAS creds will start resulting in build
failures, so adding a warning message ahead of time to all builds. Will
convert this to a build failure after a week.
We need LOAS creds to be able to even fetch the CDPush config file to
determine whether to use RBE in a build a not, which is why I'm making
this a broad error message across builds.
Test: ran "m nothing" build with / without gcert and with / without
"stubby" in $PATH and confirmed appropriate error message.
Bug: b/235985591
Change-Id: I15cbaf372b0a7b79f868a06c7d5ede19b49ae687
On the build servers, LOG_DIR is a subset of DIST_DIR, which encodes the
build number. This means that LOG_DIR is guaranteed to be different for
every build, and we'll never re-use previous soong runs on CI builds.
The current use case (writing out soong metrics) shouldn't care if the
value changes, so pipe the environment variable through, bypassing the
env dep checks. It's not clear if this is the only issue triggering
soong_build re-runs on the build servers, but it's a start.
Test: Change DIST_DIR, soong_build does not re-run.
Change-Id: I59bf117f3fbc0e7f10f0506d3d1ac7564c6a00dc
This was accidentally removed in aosp/2094705. Among other possible
issues, this caused the "used environment variable" file to be omitted
from the depfile of soong_build during mixed builds, which would result
in soong_build not being subsequently retriggered during env var
changes.
Sendng this out as a quickfix, regression test to follow.
Bug: 233774464
Test: Manual `m nothing && USE_BAZEL_ANALYSIS=1 m nothing && m nothing`,
verifying that a rebuild was retriggered in each invocation.
Change-Id: I1d9dbd1bc4696df760ebb9be262bc165c161bb21
This large refactoring has both immense performance implications and
improves mixed builds complexity / usability. Summary:
1. Queueing calls to Bazel is done in a new mutator instead of a full
soong_build pass. Normal soong_build flow is interrupted (via a
functional hook in blueprint) to invoke bazel and parse its response.
2. Implementing mixed build support for additional modules is as simple
as implementing MixedBuildsBuildable. In this interface, define the
request that must be queued to Bazel, and then subsequently define
how to handle the returned bazel cquery metadata.
3. Mixed builds consists of only a single pass. This greatly
improves mixed build performance.
Result:
A 33% runtime improvement on soong analysis phase with mixed builds.
Caveats:
C++ BazelHandler handling still remains a bit of a mess; I did what
I could within this CL's scope, but this may require additional cleanup.
Test: Treehugger
Test: Verified that aosp_arm ninja file is bit-for-bit identical with or
without this change.
Change-Id: I412d9c94d429105f4ebfafc84100d546069e6621
A typo caused one of the two files to be compared to itself if they
both had the same size.
Bug: 228496289
Test: Test_filesHaveSameContents
Change-Id: Ie44f32e3c9b8ef725f0d9933c7e701340036710a
