Similar to our vendor support, this adds support for linking rust static
libraries to vendor ramdisk cc modules.
A bug fix is also included where a restriction against setting rust_ffi
vendor-specific was not being enforced.
Bug: 179397942
Test: Example modules link, Soong tests pass.
Change-Id: I737cdf0c2f49ab349bcea2a0429e6298ebc1313e
Snapshots storead global sets of modules that should be replaced with
vendor snapshot modules. Move the data instead to a vendor_snapshot
or recovery_snapshot module type that depends on all the modules in
the snapshot, and then have modules that should use the snaphsot
depend on it to query for the set of modules that should be replaced.
Bug: 177098205
Test: vendor_snapshot_test.go
Change-Id: I2826adacfb473e9139b5ea93ba83b8a54cc1a56b
For the platform libc++ STL, remove the
-Wl,--exclude-libs,libunwind_llvm.a argument, which is redundant with
the same argument in deviceGlobalLdflags.
Bug: http://b/153025717
Test: device boots
Change-Id: Idd7791d52f74aab2d5f59419fb75f841fc29a2eb
Memtag_heap adds an ELF note that enables MTE heap tagging in
bionic/scudo. Ignored on non-executables. With diagnostic
(diag:{memtag_heap:true}) enables the SYNC mode, otherwise - ASYNC mode.
Memtag_heap defaults to set (with diag) on cc_test targets, unset
otherwise. Ignored on non MTE-compatible hardware.
Bug: b/135772972
Test: soong tests
Change-Id: I88fd0f159e609e17bd13487749980a1ba02cb91c
In case of VNDK, 'vendor_available: false' had a special meaning that
defines VNDK-private libraries. It is not trivial because not
defining a boolean property means 'false' normally. To avoid the
confusion replace it with the 'vndk.private: true' for VNDK-private
libraries and 'private: true' for LLNDK-private libraries.
All VNDK libraries must define 'vendor_available: true' and may have
'vndk.private: true' if they are VNDK-private.
With this change '(vendor|product)_available: false' is the same as
not defining the property.
LLNDK-private must define 'private: true' instead of
'vendor_available: false'.
Bug: 175768895
Test: build
Change-Id: I57fbca351be317257d95027f3cdcdbbe537eab23
A fake vendor snapshot is a vendor snapshot whose prebuilt binaries and
captured headers are all empty. It's much faster to be built than the
real vendor snapshot, so users can exploit the fake vendor snapshot to
reduce the size of vendor snapshot they need, by installing the fake
snapshot and then inspecting the ninja dependencies.
Bug: 157967325
Test: m dist vendor-fake-snapshot
Change-Id: I5e16e8dbbf9dd5e753cdd471ca73d06984a6cb2c
Replace the vndk_libraries_txt module type with llndk_libraries_txt,
etc. in preparation for making it a new SingletonModule, which will
only work with a single instance of the module type.
Bug: 176904285
Test: m checkbuild
Change-Id: Ie010a9eeee8f5849201aa4ab4eb9b2e7a9cd7d5b
Add the min_sdk_version property to Rust modules so they can declare
a minimum SDK version they support for use with APEX modules.
Test: New Soong test passes.
Bug: 174862583
Change-Id: I2829053a320f50c218783dee5adbeff9cef81e8e
Sometimes, the ordinary cc_library_* modules need test_for property when
they are part of a bigger cc_test. Instead of propagating the test_for
property from cc_test to its dependencies, this change requires the very
dependency which needs access to the private part of an APEX to
explicitly have the test_for property.
Bug: 161575591
Test: m
Change-Id: Ie1ffe9a60cd2ab02d41bbe5a98225a40392470f6
We will have some APEXes having rust binaries and libraries. So, adding
the support for the types of modules.
rust.Module now inherits from android.ApexModuleBase and implements
the android.ApexModule interface.
Bug: 172414324
Test: m
Exempt-From-Owner-Approval: rebased after +2 from the owner
Change-Id: I356ef4c45f782a6460f001e83af96d1710642d80
Relands Ic22603a5c0718b5a21686672a7471f952b4d1017 with a minor
change to track libc++ dependencies for python hosts and after
a fix to an internal genrule that depended on transitively
installed java libraries (ag/13068670).
Soong currently assumes that installed files should depend on
installed files of all transitive dependencies, which results
in extra installed file dependencies through genrules, static
libs, etc.
Annotate dependency tags for dependencies for which the
installed files are necessary such as shared libraries
and JNI libraries.
This avoids extra installed files, and is also a first step
towards genrules using their own copy of tools instead of
the installed copy.
Bug: 124313442
Test: m checkbuild
Test: java.TestBinary
Test: cc.TestInstallSharedLibs
Test: deptag_test.go
Change-Id: I725871249d561428e6f67bba6a7c65b580012b72
Soong currently assumes that installed files should depend on
installed files of all transitive dependencies, which results
in extra installed file dependencies through genrules, static
libs, etc.
Annotate dependency tags for dependencies for which the
installed files are necessary such as shared libraries
and JNI libraries.
This avoids extra installed files, and is also a first step
towards genrules using their own copy of tools instead of
the installed copy.
Bug: 124313442
Test: m checkbuild
Test: java.TestBinary
Test: cc.TestInstallSharedLibs
Test: deptag_test.go
Change-Id: Ic22603a5c0718b5a21686672a7471f952b4d1017
Prepare for using Config when adding singletons by passing
Config to NewTestContext and NewContext instead of to ctx.Register.
This will enable a followup change to store SingletonMakeVarsProviders
registered on the Context in the Config, which is necessary to run
multiple tests in parallel without data races.
Test: all soong tests
Change-Id: Id229629a4e42ff4487d317241673837726c075fc
To make a module available to product variants, it must define
`product_available: true`. `vendor_available: true` will not create
product variants any more.
However, in this CL, we don't change the behavior of
`vendor_available` property. It still creates both variants. After we
update all Android.bp files that need to provide product variants
with `product_available: true`, we may upload the remaining patches.
Bug: 150902910
Test: lunch aosp_arm64-userdebug && m
Change-Id: I0fd5be7bbae2c45d5cab3c3c2ca49f53a9b6f975
Prepare for making the relationship between an llndk_library stubs
module and the cc_library implementation module explicit by
adding an llndk_stubs property. Each cc_library will be updated
to point to its llndk_library, and the llndk_library name will
be changed to make the .llndk suffix explicit. Then the implicit
connection and suffix can be removed.
Bug: 170784825
Test: m checkbuild
Change-Id: I6b0482a3f286ec29b2e928551aa4317749f2b499
In addition to capture test, this adds vendor snapshot usage test to
ensure the snapshots of BOARD_VNDK_VERSION are used correctly.
Bug: 167642944
Test: m nothing
Change-Id: I200c95626479a2b2d982edd7488d816e01376734
We don't need the prebuilt versions. The NDK CRT objects are (now)
built from the platform sources and the only difference is that the
NDK CRT objects also include an ELF note that identifies the NDK
version, which isn't helpful for anything built by the platform.
Add a `crt` property to cc_object that allows CRT objects to identify
themselves. CRT objects, unlike other modules, will have a variant
built per-API level they support, rather than just an SDK variant and
a platform variant. This is needed because new CRT objects will rely
on APIs not available in old libcs and old CRT objects will not
support all the features of a modern one.
Test: treehugger
Bug: http://b/159925977
Change-Id: I6595485fa1bfe0ad4945193d344b863f64eec654
CFI modules can't link against non-CFI static libraries, and vice versa.
So without capturing both CFI and non-CFI static libraries, vendor
modules won't be able to use CFI, which will be a critical security
hole.
This captures both CFI and non-CFI variants of all static libraries for
vendor snapshot, except for those whose cfi are explicitly disabled.
For example, suppose that "libfoo" is defined as follows.
cc_library_static {
name: "libfoo",
vendor_available: true,
}
As it doesn't have cfi disabled, two libraries "libfoo.a" and
"libfoo.cfi.a" will be captured. When installed, vendor snapshot module
for "libfoo" will look like:
vendor_snapshot_static {
name: "libfoo",
src: "libfoo.a",
cfi: {
src: "libfoo.cfi.a",
},
}
The build system will recognize the "cfi" property, and will create both
CFI and non-CFI variant, allowing any modules to link against "libfoo"
safely, no matter whether CFI is enabled or not.
Two clarification:
1) The reason why we don't create separate modules is that DepsMutator
runs before sanitize mutators. CFI and non-CFI variant of a library
should exist in a single module.
2) We can't capture CFI variant if the source module explicitly disables
cfi variant by specifying the following.
sanitize: {
cfi: false,
}
In this case, only non-CFI variant will be created for the vendor
snapshot module.
Bug: 65377115
Test: m dist vendor-snapshot && install && build against snapshot
Change-Id: Idbf3e3205d581800d6093c8d6cf6152374129ba4
Previously, the prebuilt mutators were added by the
cc.RegisterRequiredBuildComponentsForTest() function as a convenience
but unfortunately it lead to some of the mutators being in a different
order in the tests than in the normal build.
This change:
* Extracts the RegisterPrebuiltMutators() call from
cc.RegisterRequiredBuildComponentsForTest()
* Makes sure that the prebuilt mutators are registered before the
visibility gatherer and enforcer mutators.
Bug: 162505935
Test: m nothing
Change-Id: I7d959b558200b502f0a5e4653c41ea01414e142a
Break apart test helpers a bit to make it possible to enable
LinuxBionic in a single test, and add LinuxBionic support to
cc.GatherRequiredDepsForTest.
Test: m nothing
Bug: 160349757
Change-Id: Iace1024c964cee2308c130c945daef9e46c18c66
This allows dependencies on link:shared variant of library modules, and
adds the shared libraries adjacent to the test binary
Test: Manually verified on bionic-unit-tests target
Change-Id: I5d406bf9428664c5ac3d3c5915507b750375debb
This doesn't need to be manually maintained. It briefly did need to be
during the transition from the old prebuilts, but that's long gone.
Test: treehugger
Bug: http://b/113547923
Change-Id: If05633f3cf622ab39e560a3dfcc88f3eb50406bf
Enforce min_sdk_version for every payload dependency of updatable
APEX/APKs.
android.CheckMinSdkVersion() calls ApexModule.ShouldSupportSdkVersion
for every transitive dependency from APEX/APK modules to see if it
meets the min_sdk_version requirements.
The common implementation for apex/android_app is provided in
android/apex.go.
Bug: 145796956
Bug: 152655956
Bug: 153333044
Test: m nothing
Change-Id: I4a947dc94026df7cebd552b6e8ccdb4cc1f67170
Now that tests don't need to specify every path passed to
PathForSource or PathForModuleSrc, remove them from cc.TestConfig.
Test: all soong tests
Change-Id: I90cd7b4dfc49c156afbb0eea9a77159c3e1860fa
This refines the vendor snapshot codes in order to fix logic errors.
- Capture toolchain_library and cc_library_headers correctly.
- Redirect unwind static library correctly.
- Filter out sanitize / coverage / lto by looking at HideFromMake.
- Add binary() function for clear and shorter codes.
- Include test modules.
- Add more tests to prevent further snapshot breakages.
Bug: 157106227
Test: m vendor-snapshot
Test: m nothing for all available targets
Test: EMMA_INSTRUMENT=true EMMA_INSTRUMENT_FRAMEWORK=true \
NATIVE_COVERAGE=true COVERAGE_PATHS="*" m nothing
Change-Id: Id90082b5ab730f928582ad24f022ba410855400e
Merged-In: Id90082b5ab730f928582ad24f022ba410855400e
(cherry picked from commit 4d8d8fec4a)
A follow up change will add a mechanism for a module to register a hook
that is called after any defaults have been applied. That is intended
for use by modules like java_sdk_library that create child modules that
are dependent upon properties that could be supplied by defaults.
Creating those child modules after prebuilts mutators are run will
cause problems if those child modules clash with prebuilts modules.
Moving the prebuilts mutators after the defaults mutators will fix
that.
Tests are currently being run with the mutators in different orders so
this change also cleans that up so they are consistent with the actual
code that is being run.
Bug: 155295806
Test: m checkbuild
Change-Id: I825c6df09058fb3a45db196661959eb332aca2f3
This adds gcov coverage support for Rust device library and binary
modules (including test modules). Support is provided to pass Rust
static library gcno files to CC modules and visa versa.
Additional changes:
* Begin mutator added for Rust modules.
* SuffixInList added to android package.
* CoverageEnabled added to Coverage interface.
* CoverageFiles added to LinkableLibrary interface.
* Fix in coverage mutator for non-CC modules which marked the wrong
variant as the coverage variant.
* Added coverage libraries to the cc.GatherRequiredDepsForTest.
Bug: 146448203
Test: NATIVE_COVERAGE=true COVERAGE_PATHS='*' m -j <rust_module>
Change-Id: If20728bdde42a1dd544a35a40f0d981b80a5835f
Revert submission 1242911-sdk_version_variant
Reason for revert: b/153394225
Reverted Changes:
Ife99745fb:Use libnativewindow for platform variant of libagq...
I1bae84c43:Use libnativewindow for platform variant of androi...
I6e6021ed3:Use stl to depend on libc++
Ife99745fb:Use libnativewindow for platform variant of libRSS...
I2c9f439b9:Fix static dependency on libprotobuf-cpp-lite-ndk
Iff2aff9cf:Set sdk_version for cc_genrules used by modules wi...
I7d72934aa:Add sdk mutator for native modules
Ief378a007:Use sdk variant of Soong modules when LOCAL_SDK_VE...
Bug: 149591340
Change-Id: I798fa902c779469c6382b6699351e5d12bf14785
Fixes: 153394225
Previously, when Q-targeting apexes are bundled-built, they are built
against the latest stubs.
It was because unwinder is linked dynamically in R and APIs are provided
by libc while Q apexes should run on Q where libc doesn't provide those
APIs. To make Q apexes run on Q device, libc++ should be linked with
static unwinder. But, because libc++ with static unwinder may cause problem
on HWASAN build, Q apexes were built against the latest stubs for bundled
build.
However, Q apexes should be built against Q stubs.
Now, only for HWASAN builds, Q apexes are built against the latest stubs
(and native modules are not linked with static unwinder).
Bug: 151912436
Test: TARGET_SANITIZE=hwaddress m
=> Q apexes(media, resolv, ..) are linked with the latest stubs
m
=> Q apexes are linked with Q stubs,
and Q apexes' libc++ is linked with static unwinder
Merged-In: If32f1b547e6d93e3955c7521eec8aef5851f908c
Change-Id: If32f1b547e6d93e3955c7521eec8aef5851f908c
(cherry picked from commit 7406660685)
Exempt-From-Owner-Approval: cp from internal
Change-Id: If32f1b547e6d93e3955c7521eec8aef5851f908c
Compiling native modules against the NDK disables platform features
like ASAN. For anything shipped on the system image there is no
reason to compile against the NDK. Add a new mutator to Soong that
creates a platform and an SDK variant for modules that set
sdk_version, and ignore sdk_version for the platform variant. The
SDK variant will be used for embedding in APKs that may be installed
on older platforms. Apexes use their own variants that enforce
backwards compatibility.
Test: sdk_test.go
Test: TestJNIPackaging
Bug: 149591340
Change-Id: I7d72934aaee2e1326cc0ba5f29f51f14feec4521
The marked library(ies) were available to the APEXes via the hand-written
whitelist in build/soong/apex/apex.go. Trying to remove the whitelist
by adding apex_available property to the Android.bp of the libraries.
Bug: 150999716
Test: m
Change-Id: I91d1b1076733a949ca2a959ba640ce34d0233492
Updates the member snapshot creation code to support multiple os types.
It basically sorts the variants by os type, then applies the code to
optimize the arch properties and then it optimizes the properties that
are common across architectures and extracts any properties that are
common across os types.
The java and cc member types needed to be modified to make the location
of the generated files within the snapshot os type dependent when there
is more than one os type. That was done by adding an OsPrefix() method
to the SdkMemberPropertiesBase which returns the os prefix to use when
there is > 1 os type and otherwise returns an empty string.
Added three tests, one for cc shared libraries, one for cc binary and
one for java header libraries.
Bug: 150451422
Test: m nothing
Change-Id: I08f5fbdd7852b06c9a9a2f1cfdc364338a3d5bac
With Host_supported: true, C++ part of sysprop_library will create host
variant which can be used from host modules. As there are no native
system property support on host, libbase functions will be used instead.
Adding support on host will help reduce code complexity of other
host_supported modules.
Bug: 147708854
Test: m, sysprop_test, manually test host binary
Change-Id: I850d91fea298ef1a0c16c6a7a9ec1aca5cf37e69
Move the NDK modules defined in app_test.go into cc/testing.go in
preparation for using sdk_version: "current" in more tests.
Test: all soong tests
Change-Id: I80bc31225fb4562fce42781219cefbbd6affae06
Vendor snapshot can be captured with "m dist vendor-snapshot". With
vendor snapshot and vndk snapshot, older version of /vendor and newer
version of /system will be able to be built together by setting
BOARD_VNDK_VERSION to past vendor's version.
Only vendor modules under AOSP are to be captured. In detail, modules
under following directories are ignored:
- device/
- vendor/
- hardware/, except for interfaces/, libhardware/, libhardware_legacy/,
and ril/
Test modules (cc_test, etc.) and sanitized modules are also ignored.
Bug: 65377115
Test: m dist vendor-snapshot
Change-Id: If7a2f6de7f36deee936930c0ccf7c47c4a0cebf6
