Rust test binary depending on native libraries would require them under
lib[64] directory so that the test binary can open them with default
rpath values.
Bug: 204562227
Test: presubmit
Change-Id: I029bb32c4c98fba21bd28e579a9df9f184a7f045
NewRustTest will set MultilibBoth true for modules which target
devices, however modules which target both device and host
incorrectly sets MultilibBoth for the host variant. Host tests
can only produce the primary arch target. Therefore, add the
rustTestHostMultilib load hook to set MultilibFirst for the
host variant.
Test: m rust_test module with host_supported: true, check if x86 test
produced.
Change-Id: I5b04b2a2d898823bcf326336d1d28c46945d47f5
Allows defining data binaries and libraries that should be installed
alongside a rust_test module, similar to cc_test.
This refactors cc_test as well so it can define rust_ffi_shared and
rust_binary modules as data.
Bug: 171710847
Test: New Soong tests pass.
Test: Example module installs data appropriately.
Change-Id: I0b56098fb475ec54f9b7a761220d260fe68cbee1
This CL adds support for the MTE memtag_heap sanitizer. This is
controlled via inclusion of an ELF note.
Bug: 170672854
Test: Heap MTE-enabled Rust test binary triggers MTE
Change-Id: I2619818785e86a94667d02b30d102c83456b7925
Adds the require_root property to rust_test modules so that tests can
run as root. Also adds an install base to allow vendor tests to install
to a different path, otherwise installs to 'unrestricted' like cc_test.
Bug: 200602232
Test: test with require_root: true runs as root
Test: test installed to new base directory
Change-Id: Ifa716871ff87471f0c0caff7af558d47db85ccd1
libtest does not need to be linked for every module type, so remove it
from the stdlibs list. Instead, link it only when building benchmarks or
tests.
Bug: 193782599
Test: cd external/rust/crates/; mma
Test: Rust tests still run correctly.
Change-Id: I536be8754da0987e09340744d9ebf668b8e734d0
This currently expands all globs, still need to support converting glob
syntax.
Test: go build_conversion_test
Test: GENERATE_BAZEL_FILES=true m nothing
Test: m nothing
Bug: 165114590
Change-Id: If7b26e8e663d17566fad9614ca87a8da1f095284
Adds the ability to define data files that should be installed alongside
the test.
This also fixes a bug wherein rust_test properties were duplicated.
Bug: 171710847
Test: rust_test module with "data" property installs files to device.
Change-Id: I091489afaf7e76b751a33a28049590d9fb39fe5f
This change allows a test (native, java, rust or python) to be included
in host-unit-tests suite when test option `unit_test` is set to true.
Bug: 172006742
Test: m host-unit-tests
Change-Id: I69d3eb5b51198c549e2e6914ceac3a4fc33c3cf2
Instead of returning a boolean, return an enum value to improve
readability and provide greater flexibility for future modifications.
Bug: 168729404
Test: Soong tests pass
Change-Id: Iddcdae8c34be09e476404382e43d1ea5935bae65
The current state of linkage is that device targets always link
libstd dynamically except for rust_ffi_static which requires a static
libstd linkage. However this prevents producing rust_ffi_static
modules which depend on other Rust libraries as those dependencies
will link libstd dynamically and cause a collision. We also want our
rust_test modules to statically link in libstd as well.
This adds a linkage mutator for rlibs that creates a variant for each
libstd linkage. Dependent modules can then select the variant that
matches their linkage of libstd.
Also fixes an issue where installation paths were being generated for
rlibs and static libs even though they weren't being installed. This broke
when adding the linkage mutator as Make would complain about multiple
targets producing the same output.
Bug: 168729404
Test: rust_ffi_static module with other rustlib dependency can be built.
Change-Id: I955b484bf5809e8fc5517750c7f8df82d3ca8895
Reuses the cc.Stripper logic. Abstracts Stripper to avoid the spreading
of references to the cc package.
rustc requires unstripped libraries (precisely, with the `.rustc`
section) when building dependent targets. Contrary to cc, the output of
a compiler module will remain unstripped and only an extra build rule
will be added. This rule will be referenced at install time (in
baseCompiler.install or androidmk).
This change drastically reduces the size of the installed libraries:
(unstripped, from out/target/product/crosshatch/system)
$ find . -name \*.dylib.so -print0 | du -c --files0-from=-
149996 total
(stripped, with this change)
$ find . -name \*.dylib.so -print0 | du -c --files0-from=-
42380 total
Bug: 153430439
Test: cd external/rust; mma
Change-Id: I94fd8bbcec97e0610aa325d3db4460be84d01734
Device binaries currently are linked statically by default. Instead we
should be linking these dynamic by default. To avoid conflicts when
manually specifying rlib dependencies on modules, we always link libstd
dynamically for all device modules except static libraries.
This removes the "prefer_dynamic" property entirely to avoid confusion.
Bug: 165161105
Test: m profcollectd is built dynamically.
Test: cd external/rust/; mma
Test: cd external/crosvm/; mma
Change-Id: I25ac897040acbcc2d97c791a33e8e01610632272
Adds a test_harness field to Rust test blueprint properties. If this
field is explicitly set to false, do not build the test binary with
`--test`. This is necessary for Rust tests which cannot use the standard
test harness.
Test: atest rustBinderTest
Test: atest --host proc-macro2_tests_test
Change-Id: Icbcb54422cc716348feae56b2d71f013516b0ac0
Adds the rustlibs dependency type which will automatically select
between rlib and dylib based on the type of the library.
Bug: 143217452
Test: cd external/rust; mma
Change-Id: I97faadae98bf957090a32939cfb2d3a10f74a057
This changes the way the output filename is calculated for rust_test
binaries to be more similar to cc_test.
This also removes the option to define multiple test binaries in a
single rust_test module via the TestPerSrc mutator. Now each rust_test
module corresponds to a single test binary.
Bug: 158500462
Test: m -j pin-utils_tests_pin_utils
Test: m -j unicode-xid_device_tests_unicode_xid
Change-Id: I6e0f79dcb4e49fa49d6ebb36abeef67a9eb180a0
Annotate the test config properties with android:"path", and always
use LOCAL_FULL_TEST_CONFIG to pass the path to Make.
Bug: 157621988
Test: manual
Change-Id: I1c020e642f83d994d63c9e9cb56e686086d5acaa
This adds gcov coverage support for Rust device library and binary
modules (including test modules). Support is provided to pass Rust
static library gcno files to CC modules and visa versa.
Additional changes:
* Begin mutator added for Rust modules.
* SuffixInList added to android package.
* CoverageEnabled added to Coverage interface.
* CoverageFiles added to LinkableLibrary interface.
* Fix in coverage mutator for non-CC modules which marked the wrong
variant as the coverage variant.
* Added coverage libraries to the cc.GatherRequiredDepsForTest.
Bug: 146448203
Test: NATIVE_COVERAGE=true COVERAGE_PATHS='*' m -j <rust_module>
Change-Id: If20728bdde42a1dd544a35a40f0d981b80a5835f
* Now the installation directories match those for C/C++ tests:
* The relative_install_path refers to path under nativetest(64).
* Device test files are installed in data/nativetest(64).
* Automatically generated configuration files and copied test binaries
are still in the "testcases" directory.
* Change host test configuration to run test binary files
in testcases/<mutated_module_name>/<arch_type>/<stem_name>
Bug: 140938178
Test: atest --include-subdirs under external/rust/crates
Change-Id: I4b29afb897f4ba8749e87f79857c5b1a959bb2b0
* The RustBinaryTest runner and device test config template
are derived from GTest. Device tests are pushed to /data/local/tmp.
Bug: 140938178
Test: make unicode-xid projects; run atest
Change-Id: Idb4cab7872b48c6e25bc59b85aa6d9dece4383ec
* Rename testBinaryDecorator to testDecorator
* Add TestProperties
* Add install function for testDecorator to install config files
* Add tradefed.AutoGenRustHostTestConfig
* Depend on new build/make/core/rust_host_test_config_template.xml
and new tradefed.testtype.rust.RustBinaryHostTest class
* Add autogenTemplateWithName in tradefed/autogen.go
to generate config files with customized(mutated) executable name.
* Make rust_test module names more robust and easy to use.
* Use crate name instead of source file name as the Stem
for single source file modules, to match original user
specified output file name in Cargo.toml.
* Do not set up test module SubName when Stem is empty
or when the module name already contains Stem suffix.
That happens when TestPerSrcMutator is disabled or when
there is only one source file with renamed output file name.
* In TEST_MAPPING, references to mutated rust_test modules should be
(1) <module_name> for single source file modules without mutation, or
(2) <module_name>_<crate_name> for single source file modules, or
(3) <module_name>_<source_file_base_name> for multi-file modules.
Bug: 140938178
Test: mm in rust projects, check output test file names
Change-Id: Ifdbfa14d5eed4f10b4fb983f82c93bbb9be3f899
* Rust tests are like binary files compiled with --test.
New test.go follows binary.go code patterns and reuses
some code in binary.go.
* Generate one test per source file as testPerSrc in cc/test.go.
The "all tests" variation feature of cc/test.go is not copied yet.
Fix some Stem and SubName settings to make testPerSrc work.
* Move cc.CheckDuplicate to android.CheckDuplicate,
which is now shared by cc and rust.
* Refactor tests in binary_test.go and add new test_test.go.
Bug: 140938178
Test: mm in rust projects, added rust_test and rust_test_host
Change-Id: Ia6fec8b4cf2572fd352ab1938a1f3c7b5cca2212
