zeus: Time for tequila!

This reverts commit b787c3ed18.

Android.bp

@@ -0,0 +1,8 @@
+//
+// Copyright (C) 2022-2023 The LineageOS Project
+//
+// SPDX-License-Identifier: Apache-2.0
+//
+
+soong_namespace {
+}

Android.mk

@@ -0,0 +1,11 @@
+#
+# Copyright (C) 2022-2023 The LineageOS Project
+#
+# SPDX-License-Identifier: Apache-2.0
+#
+
+LOCAL_PATH := $(call my-dir)
+
+ifeq ($(TARGET_DEVICE),zeus)
+include $(call all-makefiles-under,$(LOCAL_PATH))
+endif

AndroidProducts.mk

@@ -0,0 +1,8 @@
+#
+# Copyright (C) 2022-2023 The LineageOS Project
+#
+# SPDX-License-Identifier: Apache-2.0
+#
+
+PRODUCT_MAKEFILES := \
+    $(LOCAL_DIR)/tequila_zeus.mk

BoardConfig.mk

@@ -0,0 +1,35 @@
+#
+# Copyright (C) 2022-2023 The LineageOS Project
+#
+# SPDX-License-Identifier: Apache-2.0
+#
+
+# Inherit from xiaomi sm8450-common
+include device/xiaomi/sm8450-common/BoardConfigCommon.mk
+
+# Inherit from the proprietary version
+include vendor/xiaomi/zeus/BoardConfigVendor.mk
+
+DEVICE_PATH := device/xiaomi/zeus
+
+# Kernel
+device_second_stage_modules := \
+    goodix_fod.ko \
+    qcom_pm8008-regulator.ko \
+    fts_touch_spi.ko \
+    aw8697-haptic.ko
+
+device_vendor_dlkm_exclusive_modules := \
+    cs35l41_dlkm.ko
+
+BOARD_VENDOR_RAMDISK_RECOVERY_KERNEL_MODULES_LOAD += $(device_second_stage_modules)
+BOARD_VENDOR_KERNEL_MODULES_LOAD += $(device_second_stage_modules) $(device_vendor_dlkm_exclusive_modules)
+
+BOOT_KERNEL_MODULES += $(device_second_stage_modules)
+
+# Properties
+TARGET_SYSTEM_PROP += $(DEVICE_PATH)/properties/system.prop
+TARGET_VENDOR_PROP += $(DEVICE_PATH)/properties/vendor.prop
+
+# Screen density
+TARGET_SCREEN_DENSITY := 560

README.md

@@ -0,0 +1,24 @@
+Copyright (C) 2022-2023 The LineageOS Project
+
+Device configuration for Xiaomi 12 Pro
+=========================================
+
+The Xiaomi 12 Pro (codenamed _"zeus"_) is a high-end smartphone from Xiaomi.
+
+It was globally released in March 2022.
+
+## Device specifications
+
+Basic   | Spec Sheet
+-------:|:-------------------------
+Platform | Snapdragon® 8 Gen 1 (SM8450)
+RAM & Storage | 8GB/128GB, 8GB/256GB, 12GB/256GB (LPDDR5 RAM, UFS 3.1 storage)
+Shipped Android Version | 12
+Battery | Non-removable, 4600 mAh
+Display | 6.73″, LTPO 120Hz, 3200x1440 (522 ppi)
+Rear camera | 50MP wide angle, 50MP ultra wide-angle, 50MP telephoto
+Front camera | 32MP in-display
+
+## Device picture
+
+![Xiaomi 12 Pro](https://i01.appmifile.com/v1/MI_18455B3E4DA706226CF7535A58E875F0267/pms_1646293765.11623978.png "Xiaomi 12 Pro in blue")

board-info.txt

@@ -0,0 +1 @@
+require board=taro|zeus

device.mk

@@ -0,0 +1,31 @@
+#
+# Copyright (C) 2022-2023 The LineageOS Project
+#
+# SPDX-License-Identifier: Apache-2.0
+#
+
+# Inherit from xiaomi sm8450-common
+$(call inherit-product, device/xiaomi/sm8450-common/common.mk)
+
+# Inherit from the proprietary version
+$(call inherit-product, vendor/xiaomi/zeus/zeus-vendor.mk)
+
+# Overlay
+PRODUCT_PACKAGES += \
+    ApertureResZeus \
+    FrameworksResZeus \
+    SettingsProviderResZeus \
+    SettingsResZeus \
+    SystemUIResZeus \
+    WifiResZeus
+
+# Sensors
+PRODUCT_PACKAGES += \
+    sensors.xiaomi
+
+PRODUCT_COPY_FILES += \
+    $(LOCAL_PATH)/sensors/hals.conf:$(TARGET_COPY_OUT_VENDOR)/etc/sensors/hals.conf
+
+# Soong namespaces
+PRODUCT_SOONG_NAMESPACES += \
+    $(LOCAL_PATH)

extract-files.sh

@@ -0,0 +1,38 @@
+#!/bin/bash
+#
+# Copyright (C) 2016 The CyanogenMod Project
+# Copyright (C) 2017-2020 The LineageOS Project
+#
+# SPDX-License-Identifier: Apache-2.0
+#
+
+function blob_fixup() {
+    case "${1}" in
+        vendor/etc/camera/zeus_enhance_motiontuning.xml|vendor/etc/camera/zeus_motiontuning.xml)
+            sed -i 's/xml=version/xml version/g' "${2}"
+            ;;
+        vendor/etc/camera/pureShot_parameter.xml|vendor/etc/camera/pureView_parameter.xml)
+            sed -i 's/=\([0-9]\+\)>/="\1">/g' "${2}"
+            ;;
+        vendor/etc/init/hw/init.batterysecret.rc)
+            sed -i 's/on charger/on property:init.svc.vendor.charger=running/g' "${2}"
+            ;;
+        vendor/lib/hw/vendor.xiaomi.sensor.citsensorservice@2.0-impl.so|vendor/lib64/hw/vendor.xiaomi.sensor.citsensorservice@2.0-impl.so)
+            sed -i 's/_ZN13DisplayConfig10ClientImpl13ClientImplGetENSt3__112basic_stringIcNS1_11char_traitsIcEENS1_9allocatorIcEEEEPNS_14ConfigCallbackE/_ZN13DisplayConfig10ClientImpl4InitENSt3__112basic_stringIcNS1_11char_traitsIcEENS1_9allocatorIcEEEEPNS_14ConfigCallbackE\x0\x0\x0\x0\x0\x0\x0\x0\x0\x0/g' "${2}"
+            ;;
+    esac
+}
+
+# If we're being sourced by the common script that we called,
+# stop right here. No need to go down the rabbit hole.
+if [ "${BASH_SOURCE[0]}" != "${0}" ]; then
+    return
+fi
+
+set -e
+
+export DEVICE=zeus
+export DEVICE_COMMON=sm8450-common
+export VENDOR=xiaomi
+
+"./../../${VENDOR}/${DEVICE_COMMON}/extract-files.sh" "$@"

overlay/ApertureResZeus/Android.bp

@@ -0,0 +1,10 @@
+//
+// Copyright (C) 2023 The LineageOS Project
+//
+// SPDX-License-Identifier: Apache-2.0
+//
+
+runtime_resource_overlay {
+    name: "ApertureResZeus",
+    device_specific: true,
+}

overlay/ApertureResZeus/AndroidManifest.xml

@@ -0,0 +1,10 @@
+<!--
+     Copyright (C) 2023 The LineageOS Project
+     SPDX-License-Identifier: Apache-2.0
+-->
+<manifest xmlns:android="http://schemas.android.com/apk/res/android"
+    package="org.lineageos.aperture.overlay.zeus">
+    <overlay android:targetPackage="org.lineageos.aperture"
+                   android:isStatic="true"
+                   android:priority="700"/>
+</manifest>

overlay/ApertureResZeus/res/values/config.xml

@@ -0,0 +1,44 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     SPDX-FileCopyrightText: 2023 The LineageOS Project
+     SPDX-License-Identifier: Apache-2.0
+-->
+<resources>
+    <!-- Enable auxiliary cameras selector. -->
+    <bool name="config_enableAuxCameras">true</bool>
+
+    <!-- List of ID of auxiliary cameras that must be ignored by the app. -->
+    <string-array name="config_ignoredAuxCameraIds">
+        <item>6</item>
+    </string-array>
+
+    <!-- An array of triplets made of (camera ID, qualities, framerates).
+         These video modes will be added to the available
+         quality/framerate combinations of a camera device.
+         Make sure the device is able to handle those configurations
+         and maintain a stable framerate at any condition.
+         Note that you can't add video qualities that aren't
+         exposed by the camera, only new framerates.
+         Valid values of resolution are:
+          - "sd" (480p)
+          - "hd" (720p)
+          - "fhd" (1080p)
+          - "uhd" (2160p)
+         Valid values of framerate are:
+          - "24"
+          - "30"
+          - "60"
+          - "120"
+         Example:
+             <string-array name="config_additionalVideoConfigurations">
+                 <item>0</item> <item>sd|hd|fhd</item> <item>60|120</item>
+                 <item>1</item> <item>sd|hd|fhd</item> <item>60</item>
+             </string-array>
+    -->
+    <string-array name="config_additionalVideoConfigurations">
+        <item>0</item> <item>sd|hd|fhd|uhd</item> <item>60</item>
+        <item>1</item> <item>sd|hd|fhd</item>     <item>60</item>
+        <item>2</item> <item>sd|hd|fhd|uhd</item> <item>60</item>
+        <item>3</item> <item>sd|hd|fhd|uhd</item> <item>60</item>
+    </string-array>
+</resources>

overlay/Frameworks/Android.bp

@@ -0,0 +1,10 @@
+//
+// Copyright (C) 2022 The LineageOS Project
+//
+// SPDX-License-Identifier: Apache-2.0
+//
+
+runtime_resource_overlay {
+    name: "FrameworksResZeus",
+    device_specific: true,
+}

overlay/Frameworks/AndroidManifest.xml

@@ -0,0 +1,10 @@
+<!--
+     Copyright (C) 2022 The LineageOS Project
+     SPDX-License-Identifier: Apache-2.0
+-->
+<manifest xmlns:android="http://schemas.android.com/apk/res/android"
+    package="android.overlay.zeus">
+    <overlay android:targetPackage="android"
+                   android:isStatic="true"
+                   android:priority="700"/>
+</manifest>

overlay/Frameworks/res/values/config.xml

@@ -0,0 +1,434 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     Copyright (C) 2024 The LineageOS Project
+     SPDX-License-Identifier: Apache-2.0
+-->
+<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
+    <integer name="config_udfps_illumination_transition_ms">0</integer>
+
+    <!-- Minimum screen brightness setting allowed by power manager.
+         -2 is invalid so setting will resort to int value specified above.
+         Set this to 0.0 to allow screen to go to minimal brightness.
+         The user is forbidden from setting the brightness below this level. -->
+    <item format="float" name="config_screenBrightnessSettingMinimumFloat" type="dimen">0.002197534</item>
+
+    <!-- Maximum screen brightness allowed by the power manager.
+         -2 is invalid so setting will resort to int value specified above.
+         Set this to 1.0 for maximum brightness range.
+         The user is forbidden from setting the brightness above this level. -->
+    <item format="float" name="config_screenBrightnessSettingMaximumFloat" type="dimen">1</item>
+
+    <!-- Default screen brightness setting set.
+         -2 is invalid so setting will resort to int value specified above.
+         Must be in the range specified by minimum and maximum. -->
+    <item format="float" name="config_screenBrightnessSettingDefaultFloat" type="dimen">0.07496032</item>
+
+    <!-- Stability requirements in milliseconds for accepting a new brightness level.  This is used
+         for debouncing the light sensor.  Different constants are used to debounce the light sensor
+         when adapting to brighter or darker environments.  This parameter controls how quickly
+         brightness changes occur in response to an observed change in light level that exceeds the
+         hysteresis threshold. -->
+    <integer name="config_autoBrightnessBrighteningLightDebounce">1000</integer>
+    <integer name="config_autoBrightnessDarkeningLightDebounce">1000</integer>
+
+    <!-- The maximum range of gamma adjustment possible using the screen
+         auto-brightness adjustment setting. -->
+    <fraction name="config_autoBrightnessAdjustmentMaxGamma">100.0%</fraction>
+    <item name="config_screenBrightnessDimFloat" type="dimen">0.002197534</item>
+
+    <!-- Array of light sensor lux values to define our levels for auto backlight brightness support.
+         The N entries of this array define N + 1 control points as follows:
+         (1-based arrays)
+
+         Point 1:            (0, value[1]):             lux <= 0
+         Point 2:     (level[1], value[2]):  0        < lux <= level[1]
+         Point 3:     (level[2], value[3]):  level[2] < lux <= level[3]
+         ...
+         Point N+1: (level[N], value[N+1]):  level[N] < lux
+
+         The control points must be strictly increasing.  Each control point
+         corresponds to an entry in the brightness backlight values arrays.
+         For example, if lux == level[1] (first element of the levels array)
+         then the brightness will be determined by value[2] (second element
+         of the brightness values array).
+
+         Spline interpolation is used to determine the auto-brightness
+         backlight values for lux levels between these control points.
+
+         Must be overridden in platform specific overlays -->
+    <integer-array name="config_autoBrightnessLevels">
+        <item>1</item>
+        <item>2</item>
+        <item>4</item>
+        <item>6</item>
+        <item>8</item>
+        <item>10</item>
+        <item>15</item>
+        <item>20</item>
+        <item>25</item>
+        <item>30</item>
+        <item>35</item>
+        <item>40</item>
+        <item>45</item>
+        <item>50</item>
+        <item>55</item>
+        <item>60</item>
+        <item>65</item>
+        <item>70</item>
+        <item>75</item>
+        <item>80</item>
+        <item>85</item>
+        <item>90</item>
+        <item>95</item>
+        <item>100</item>
+        <item>120</item>
+        <item>140</item>
+        <item>160</item>
+        <item>180</item>
+        <item>200</item>
+        <item>220</item>
+        <item>240</item>
+        <item>260</item>
+        <item>280</item>
+        <item>300</item>
+        <item>320</item>
+        <item>340</item>
+        <item>360</item>
+        <item>380</item>
+        <item>400</item>
+        <item>420</item>
+        <item>440</item>
+        <item>460</item>
+        <item>480</item>
+        <item>500</item>
+        <item>700</item>
+        <item>900</item>
+        <item>1100</item>
+        <item>1300</item>
+        <item>1500</item>
+        <item>1700</item>
+        <item>1900</item>
+        <item>2000</item>
+        <item>2500</item>
+        <item>3000</item>
+        <item>3500</item>
+        <item>4000</item>
+        <item>4500</item>
+        <item>5000</item>
+        <item>5500</item>
+        <item>6000</item>
+        <item>6500</item>
+        <item>7000</item>
+        <item>7500</item>
+        <item>8000</item>
+        <item>8500</item>
+        <item>9000</item>
+        <item>9500</item>
+        <item>10000</item>
+        <item>10500</item>
+        <item>11000</item>
+        <item>11500</item>
+        <item>12000</item>
+        <item>12500</item>
+        <item>13000</item>
+        <item>13500</item>
+        <item>14000</item>
+        <item>14500</item>
+        <item>15000</item>
+        <item>16000</item>
+        <item>17000</item>
+        <item>18000</item>
+        <item>19000</item>
+        <item>20000</item>
+        <item>21000</item>
+        <item>22000</item>
+        <item>23000</item>
+        <item>24000</item>
+        <item>25000</item>
+        <item>26000</item>
+        <item>27000</item>
+        <item>28000</item>
+        <item>29000</item>
+        <item>30000</item>
+        <item>35000</item>
+        <item>40000</item>
+        <item>45000</item>
+        <item>50000</item>
+        <item>55000</item>
+        <item>60000</item>
+        <item>65000</item>
+        <item>70000</item>
+        <item>75000</item>
+        <item>80000</item>
+        <item>85000</item>
+        <item>90000</item>
+        <item>95000</item>
+        <item>100000</item>
+    </integer-array>
+
+    <!-- Array of output values for LCD backlight corresponding to the lux values
+         in the config_autoBrightnessLevels array.  This array should have size one greater
+         than the size of the config_autoBrightnessLevels array.
+         The brightness values must be between 0 and 255 and be non-decreasing.
+         This must be overridden in platform specific overlays -->
+    <integer-array name="config_autoBrightnessLcdBacklightValues" />
+
+    <!-- Array of desired screen brightness in nits corresponding to the lux values
+         in the config_autoBrightnessLevels array. The display brightness is defined as the measured
+         brightness of an all-white image.
+
+         If this is defined then:
+            - config_autoBrightnessLcdBacklightValues should not be defined
+            - config_screenBrightnessNits must be defined
+            - config_screenBrightnessBacklight must be defined
+
+         This array should have size one greater than the size of the config_autoBrightnessLevels
+         array. The brightness values must be non-negative and non-decreasing. This must be
+         overridden in platform specific overlays -->
+    <array name="config_autoBrightnessDisplayValuesNits">
+        <item>3.9</item>
+        <item>4.6</item>
+        <item>5.3</item>
+        <item>17.6</item>
+        <item>24.3</item>
+        <item>29.7</item>
+        <item>34.0</item>
+        <item>46.0</item>
+        <item>59.0</item>
+        <item>76.0</item>
+        <item>81.0</item>
+        <item>82.0</item>
+        <item>82.0</item>
+        <item>82.0</item>
+        <item>83.0</item>
+        <item>83.0</item>
+        <item>83.0</item>
+        <item>84.0</item>
+        <item>84.0</item>
+        <item>85.0</item>
+        <item>85.0</item>
+        <item>85.0</item>
+        <item>85.0</item>
+        <item>86.0</item>
+        <item>86.0</item>
+        <item>87.0</item>
+        <item>89.0</item>
+        <item>90.0</item>
+        <item>91.0</item>
+        <item>93.0</item>
+        <item>94.0</item>
+        <item>96.0</item>
+        <item>97.0</item>
+        <item>99.0</item>
+        <item>100.0</item>
+        <item>101.0</item>
+        <item>104.0</item>
+        <item>105.0</item>
+        <item>106.0</item>
+        <item>108.0</item>
+        <item>109.0</item>
+        <item>111.0</item>
+        <item>112.0</item>
+        <item>114.0</item>
+        <item>116.0</item>
+        <item>137.0</item>
+        <item>157.0</item>
+        <item>180.0</item>
+        <item>205.0</item>
+        <item>226.0</item>
+        <item>257.0</item>
+        <item>280.0</item>
+        <item>295.0</item>
+        <item>369.0</item>
+        <item>400.0</item>
+        <item>416.7</item>
+        <item>433.3</item>
+        <item>450.0</item>
+        <item>466.7</item>
+        <item>483.3</item>
+        <item>500.0</item>
+        <item>512.5</item>
+        <item>525.0</item>
+        <item>537.5</item>
+        <item>550.0</item>
+        <item>562.5</item>
+        <item>575.0</item>
+        <item>587.5</item>
+        <item>600.0</item>
+        <item>610.0</item>
+        <item>620.0</item>
+        <item>630.0</item>
+        <item>640.0</item>
+        <item>650.0</item>
+        <item>660.0</item>
+        <item>670.0</item>
+        <item>680.0</item>
+        <item>690.0</item>
+        <item>700.0</item>
+        <item>705.0</item>
+        <item>710.0</item>
+        <item>715.0</item>
+        <item>720.0</item>
+        <item>725.0</item>
+        <item>730.0</item>
+        <item>735.0</item>
+        <item>740.0</item>
+        <item>745.0</item>
+        <item>750.0</item>
+        <item>755.0</item>
+        <item>760.0</item>
+        <item>765.0</item>
+        <item>770.0</item>
+        <item>775.0</item>
+        <item>800.0</item>
+        <item>816.7</item>
+        <item>833.3</item>
+        <item>850.0</item>
+        <item>866.7</item>
+        <item>883.3</item>
+        <item>900.0</item>
+        <item>914.3</item>
+        <item>928.6</item>
+        <item>942.9</item>
+        <item>957.1</item>
+        <item>971.4</item>
+        <item>985.7</item>
+        <item>1000.0</item>
+    </array>
+
+    <!-- An array describing the screen's backlight values corresponding to the brightness
+         values in the config_screenBrightnessNits array.
+
+         This array should be equal in size to config_screenBrightnessBacklight. -->
+    <integer-array name="config_screenBrightnessBacklight">
+        <item>1</item>
+        <item>255</item>
+    </integer-array>
+
+    <!-- An array of floats describing the screen brightness in nits corresponding to the backlight
+         values in the config_screenBrightnessBacklight array.  On OLED displays these  values
+         should be measured with an all white image while the display is in the fully on state.
+         Note that this value should *not* reflect the maximum brightness value for any high
+         brightness modes but only the maximum brightness value obtainable in a sustainable manner.
+
+         This array should be equal in size to config_screenBrightnessBacklight -->
+    <array name="config_screenBrightnessNits">
+        <item>3.9</item>
+        <item>1000.0</item>
+    </array>
+
+    <!-- Array of ambient lux threshold values. This is used for determining hysteresis constraint
+         values by calculating the index to use for lookup and then setting the constraint value
+         to the corresponding value of the array. The new brightening hysteresis constraint value
+         is the n-th element of config_ambientBrighteningThresholds, and the new darkening
+         hysteresis constraint value is the n-th element of config_ambientDarkeningThresholds.
+
+         The (zero-based) index is calculated as follows: (MAX is the largest index of the array)
+         condition                       calculated index
+         value < level[0]                0
+         level[n] <= value < level[n+1]  n+1
+         level[MAX] <= value             MAX+1 -->
+    <integer-array name="config_ambientThresholdLevels">
+        <item>2</item>
+        <item>10</item>
+        <item>30</item>
+        <item>100</item>
+        <item>800</item>
+        <item>2000</item>
+        <item>4000</item>
+    </integer-array>
+
+    <!-- Array of hysteresis constraint values for brightening, represented as tenths of a
+         percent. The length of this array is assumed to be one greater than
+         config_ambientThresholdLevels. The brightening threshold is calculated as
+         lux * (1.0f + CONSTRAINT_VALUE). When the current lux is higher than this threshold,
+         the screen brightness is recalculated. See the config_ambientThresholdLevels
+         description for how the constraint value is chosen. -->
+    <integer-array name="config_ambientBrighteningThresholds">
+        <item>2</item>
+        <item>6</item>
+        <item>10</item>
+        <item>30</item>
+        <item>100</item>
+        <item>400</item>
+        <item>600</item>
+        <item>1000</item>
+    </integer-array>
+
+    <!-- Array of hysteresis constraint values for darkening, represented as tenths of a
+         percent. The length of this array is assumed to be one greater than
+         config_ambientThresholdLevels. The darkening threshold is calculated as
+         lux * (1.0f - CONSTRAINT_VALUE). When the current lux is lower than this threshold,
+         the screen brightness is recalculated. See the config_ambientThresholdLevels
+         description for how the constraint value is chosen. -->
+    <integer-array name="config_ambientDarkeningThresholds">
+        <item>800</item>
+        <item>800</item>
+        <item>500</item>
+        <item>500</item>
+        <item>500</item>
+        <item>500</item>
+        <item>500</item>
+        <item>500</item>
+    </integer-array>
+
+    <!-- Type of the udfps long press sensor. Empty if long press is not supported. -->
+    <string name="config_dozeUdfpsLongPressSensorType" translatable="false">org.lineageos.sensor.udfps</string>
+
+    <!-- The bounding path of the cutout region of the main built-in display.
+         Must either be empty if there is no cutout region, or a string that is parsable by
+         {@link android.util.PathParser}.
+
+         The path is assumed to be specified in display coordinates with pixel units and in
+         the display's native orientation, with the origin of the coordinate system at the
+         center top of the display. Optionally, you can append either `@left` or `@right` to the
+         end of the path string, in order to change the path origin to either the top left,
+         or top right of the display.
+
+         To facilitate writing device-independent emulation overlays, the marker `@dp` can be
+         appended after the path string to interpret coordinates in dp instead of px units.
+         Note that a physical cutout should be configured in pixels for the best results.
+
+         If the display supports multiple resolutions, please define the path config based on the
+         highest resolution so that it can be scaled correctly in each resolution.
+
+         Example for a 10px x 10px square top-center cutout:
+                <string ...>M -5,0 L -5,10 L 5,10 L 5,0 Z</string>
+         Example for a 10dp x 10dp square top-center cutout:
+                <string ...>M -5,0 L -5,10 L 5,10 L 5,0 Z @dp</string>
+
+         @see https://www.w3.org/TR/SVG/paths.html#PathData
+         -->
+    <string name="config_mainBuiltInDisplayCutout" translatable="false">M 0,0 H -42 V 108 H 42 V 0 H 0 Z</string>
+
+    <!-- The default refresh rate for a given device. Change this value to set a higher default
+         refresh rate. If the hardware composer on the device supports display modes with a higher
+         refresh rate than the default value specified here, the framework may use those higher
+         refresh rate modes if an app chooses one by setting preferredDisplayModeId or calling
+         setFrameRate().
+         If a non-zero value is set for config_defaultPeakRefreshRate, then
+         config_defaultRefreshRate may be set to 0, in which case the value set for
+         config_defaultPeakRefreshRate will act as the default frame rate. -->
+    <integer name="config_defaultRefreshRate">0</integer>
+
+    <!-- The default peak refresh rate for a given device. Change this value if you want to prevent
+         the framework from using higher refresh rates, even if display modes with higher refresh
+         rates are available from hardware composer. Only has an effect if the value is
+         non-zero. -->
+    <integer name="config_defaultPeakRefreshRate">120</integer>
+
+    <!-- List of biometric sensors on the device, in decreasing strength. Consumed by AuthService
+         when registering authenticators with BiometricService. Format must be ID:Modality:Strength,
+         where: IDs are unique per device, Modality as defined in BiometricAuthenticator.java,
+         and Strength as defined in Authenticators.java -->
+    <string-array name="config_biometric_sensors" translatable="false">
+        <item>0:2:15</item>
+    </string-array>
+
+    <!-- The properties of a UDFPS sensor in pixels, in the order listed below: -->
+    <integer-array name="config_udfps_sensor_props" translatable="false">
+        <item>720</item>
+        <item>2480</item>
+        <item>134</item>
+    </integer-array>
+</resources>

overlay/Frameworks/res/values/dimens.xml

@@ -0,0 +1,14 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     Copyright (C) 2024 The LineageOS Project
+     SPDX-License-Identifier: Apache-2.0
+-->
+<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
+    <!-- Radius of the software rounded corners at the top of the display in its natural
+        orientation. If zero, the value of rounded_corner_radius is used. -->
+    <dimen name="rounded_corner_radius_top">120.0px</dimen>
+
+    <!-- Radius of the software rounded corners at the bottom of the display in its natural
+        orientation. If zero, the value of rounded_corner_radius is used. -->
+    <dimen name="rounded_corner_radius_bottom">111.0px</dimen>
+</resources>

overlay/Frameworks/res/xml/power_profile.xml

@@ -0,0 +1,210 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     Copyright (C) 2024 The LineageOS Project
+     SPDX-License-Identifier: Apache-2.0
+-->
+<device name="Android">
+    <item name="none">0</item>
+
+    <!-- Additional power used when screen is turned on at minimum brightness -->
+    <item name="screen.on">91.36</item>
+
+    <!-- Additional power used when screen is at maximum brightness, compared to
+         screen at minimum brightness -->
+    <item name="screen.full">227.8</item>
+    <array name="cpu.clusters.cores">
+        <value>4</value>
+        <value>3</value>
+        <value>1</value>
+    </array>
+
+    <!-- Different CPU speeds as reported in
+         /sys/devices/system/cpu/cpu0/cpufreq/stats/scaling_available_frequencies -->
+    <array name="cpu.core_speeds.cluster0">
+        <value>307200</value>
+        <value>403200</value>
+        <value>518400</value>
+        <value>614400</value>
+        <value>729600</value>
+        <value>844800</value>
+        <value>960000</value>
+        <value>1075200</value>
+        <value>1171200</value>
+        <value>1267200</value>
+        <value>1363200</value>
+        <value>1478400</value>
+        <value>1574400</value>
+        <value>1689600</value>
+        <value>1785600</value>
+    </array>
+
+    <!-- Additional power used by a CPU from cluster 0 when running at different
+         speeds. Currently this measurement also includes cluster cost. -->
+    <array name="cpu.core_power.cluster0">
+        <value>62.47</value>
+        <value>62.72</value>
+        <value>65.70</value>
+        <value>65.57</value>
+        <value>68.14</value>
+        <value>70.69</value>
+        <value>74.22</value>
+        <value>78.68</value>
+        <value>81.59</value>
+        <value>87.35</value>
+        <value>89.96</value>
+        <value>97.87</value>
+        <value>105.87</value>
+        <value>113.65</value>
+        <value>121.24</value>
+    </array>
+
+    <!-- Different CPU speeds as reported in
+         /sys/devices/system/cpu/cpu4/cpufreq/stats/scaling_available_frequencies -->
+    <array name="cpu.core_speeds.cluster1">
+        <value>633600</value>
+        <value>768000</value>
+        <value>883200</value>
+        <value>998400</value>
+        <value>1113600</value>
+        <value>1209600</value>
+        <value>1324800</value>
+        <value>1440000</value>
+        <value>1555200</value>
+        <value>1651200</value>
+        <value>1766400</value>
+        <value>1881600</value>
+        <value>1996800</value>
+        <value>2112000</value>
+        <value>2227200</value>
+        <value>2342400</value>
+        <value>2419200</value>
+    </array>
+
+    <!-- Additional power used by a CPU from cluster 1 when running at different
+         speeds. Currently this measurement also includes cluster cost. -->
+    <array name="cpu.core_power.cluster1">
+        <value>85.49</value>
+        <value>91.78</value>
+        <value>97.56</value>
+        <value>112.64</value>
+        <value>116.75</value>
+        <value>128.44</value>
+        <value>142.80</value>
+        <value>154.45</value>
+        <value>169.96</value>
+        <value>185.33</value>
+        <value>211.81</value>
+        <value>238.82</value>
+        <value>285.39</value>
+        <value>321.98</value>
+        <value>357.27</value>
+        <value>401.79</value>
+        <value>445.00</value>
+    </array>
+    <array name="cpu.core_speeds.cluster2">
+        <value>806400</value>
+        <value>940800</value>
+        <value>1056000</value>
+        <value>1171200</value>
+        <value>1286400</value>
+        <value>1401600</value>
+        <value>1497600</value>
+        <value>1612800</value>
+        <value>1728000</value>
+        <value>1843200</value>
+        <value>1958400</value>
+        <value>2054400</value>
+        <value>2169600</value>
+        <value>2284800</value>
+        <value>2400000</value>
+        <value>2515200</value>
+        <value>2630400</value>
+        <value>2726400</value>
+        <value>2822400</value>
+        <value>2841600</value>
+    </array>
+    <array name="cpu.core_power.cluster2">
+        <value>124.12</value>
+        <value>138.76</value>
+        <value>154.78</value>
+        <value>170.76</value>
+        <value>184.48</value>
+        <value>204.09</value>
+        <value>224.36</value>
+        <value>246.84</value>
+        <value>271.87</value>
+        <value>296.94</value>
+        <value>342.70</value>
+        <value>368.80</value>
+        <value>422.59</value>
+        <value>468.96</value>
+        <value>523.99</value>
+        <value>585.21</value>
+        <value>664.22</value>
+        <value>728.44</value>
+        <value>818.93</value>
+        <value>832.35</value>
+    </array>
+
+  <!-- Additional power consumption by CPU excluding cluster and core when
+       running -->
+    <item name="cpu.active">23.2</item>
+
+  <!-- Current when CPU is idle -->
+    <item name="cpu.idle">8.13</item>
+
+    <!-- Power consumption when CPU is suspended -->
+    <item name="cpu.suspend">0</item>
+
+  <!-- This is the battery capacity in mAh (measured at nominal voltage) -->
+    <item name="battery.capacity">4600</item>
+    <item name="wifi.on">1.24</item>
+    <item name="wifi.active">180.37</item>
+    <item name="wifi.scan">41.25</item>
+    <item name="dsp.audio">23.43</item>
+    <item name="dsp.video">78.01</item>
+    <item name="camera.flashlight">150</item>
+    <item name="camera.avg">883.04</item>
+    <item name="gps.on">6.16</item>
+    <item name="radio.active">465.355</item>
+    <item name="radio.scanning">27.08</item>
+    <array name="radio.on">
+        <value>22.17</value>
+        <value>8</value>
+    </array>
+    <item name="modem.controller.idle">6</item>
+    <item name="modem.controller.rx">180</item>
+    <item name="modem.controller.tx">186</item>
+    <item name="modem.controller.voltage">3700</item>
+
+  <!-- Memory bandwidth power values in mA at the rail. There must be one value
+       for each bucket defined in the device tree. -->
+    <array name="memory.bandwidths">
+        <value>17</value>
+    </array>
+
+  <!-- Idle Receive current for wifi radio in mA. 0 by default-->
+    <item name="wifi.controller.idle">1</item>
+
+  <!-- Rx current for wifi radio in mA. 0 by default-->
+    <item name="wifi.controller.rx">176</item>
+
+  <!-- Tx current for wifi radio in mA. 0 by default-->
+    <item name="wifi.controller.tx">200</item>
+    <array name="wifi.controller.tx_levels">
+        <value>1</value>
+    </array>
+
+  <!-- Operating volatage for wifi radio in mV. 0 by default-->
+    <item name="wifi.controller.voltage">3700</item>
+    <array name="wifi.batchedscan">
+        <value>.0001</value>
+        <value>.001</value>
+        <value>.01</value>
+        <value>.1</value>
+        <value>1</value>
+    </array>
+    <item name="bluetooth.active">63.83</item>
+    <item name="bluetooth.on">0.7</item>
+    <item name="bluetooth.controller.voltage">3700</item>
+</device>

overlay/Settings/Android.bp

@@ -0,0 +1,10 @@
+//
+// Copyright (C) 2022 The LineageOS Project
+//
+// SPDX-License-Identifier: Apache-2.0
+//
+
+runtime_resource_overlay {
+    name: "SettingsResZeus",
+    device_specific: true,
+}

overlay/Settings/AndroidManifest.xml

@@ -0,0 +1,10 @@
+<!--
+     Copyright (C) 2022 The LineageOS Project
+     SPDX-License-Identifier: Apache-2.0
+-->
+<manifest xmlns:android="http://schemas.android.com/apk/res/android"
+    package="com.android.settings.overlay.zeus">
+    <overlay android:targetPackage="com.android.settings"
+                   android:isStatic="true"
+                   android:priority="700"/>
+</manifest>

overlay/Settings/res/values/lineage_config.xml

@@ -0,0 +1,12 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     Copyright (C) 2023 The LineageOS Project
+     SPDX-License-Identifier: Apache-2.0
+-->
+<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
+    <!-- Whether to show peak refresh rate in display settings -->
+    <bool name="config_show_peak_refresh_rate_switch">true</bool>
+
+    <!-- Whether to show min refresh rate in display settings -->
+    <bool name="config_show_min_refresh_rate_switch">true</bool>
+</resources>

overlay/SettingsProvider/Android.bp

@@ -0,0 +1,10 @@
+//
+// Copyright (C) 2023 The LineageOS Project
+//
+// SPDX-License-Identifier: Apache-2.0
+//
+
+runtime_resource_overlay {
+    name: "SettingsProviderResZeus",
+    device_specific: true
+}

overlay/SettingsProvider/AndroidManifest.xml

@@ -0,0 +1,10 @@
+<!--
+     Copyright (C) 2022 The LineageOS Project
+     SPDX-License-Identifier: Apache-2.0
+-->
+<manifest xmlns:android="http://schemas.android.com/apk/res/android"
+    package="com.android.providers.settings.overlay.zeus">
+    <overlay android:targetPackage="com.android.providers.settings"
+                   android:isStatic="true"
+                   android:priority="700"/>
+</manifest>

overlay/SettingsProvider/res/values/defaults.xml

@@ -0,0 +1,9 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     Copyright (C) 2023 The LineageOS Project
+     SPDX-License-Identifier: Apache-2.0
+-->
+<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
+    <!-- Default for Settings.Global.DEVICE_NAME $1=MODEL-->
+    <string name="def_device_name_simple">Xiaomi 12 Pro</string>
+</resources>

overlay/SystemUI/Android.bp

@@ -0,0 +1,10 @@
+//
+// Copyright (C) 2022 The LineageOS Project
+//
+// SPDX-License-Identifier: Apache-2.0
+//
+
+runtime_resource_overlay {
+    name: "SystemUIResZeus",
+    device_specific: true,
+}

overlay/SystemUI/AndroidManifest.xml

@@ -0,0 +1,10 @@
+<!--
+     Copyright (C) 2022 The LineageOS Project
+     SPDX-License-Identifier: Apache-2.0
+-->
+<manifest xmlns:android="http://schemas.android.com/apk/res/android"
+    package="com.android.systemui.overlay.zeus">
+    <overlay android:targetPackage="com.android.systemui"
+                   android:isStatic="true"
+                   android:priority="700"/>
+</manifest>

overlay/SystemUI/res/values/config.xml

@@ -0,0 +1,9 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     Copyright (C) 2023 The LineageOS Project
+     SPDX-License-Identifier: Apache-2.0
+-->
+<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
+    <!-- The radius of the enrollment progress bar, in dp -->
+    <integer name="config_udfpsEnrollProgressBar" translatable="false">139</integer>
+</resources>

overlay/SystemUI/res/values/dimens.xml

@@ -0,0 +1,8 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     Copyright (C) 2023 The LineageOS Project
+     SPDX-License-Identifier: Apache-2.0
+-->
+<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
+    <dimen name="rounded_corner_content_padding">52.0px</dimen>
+</resources>

overlay/Wifi/Android.bp

@@ -0,0 +1,10 @@
+//
+// Copyright (C) 2023 The LineageOS Project
+//
+// SPDX-License-Identifier: Apache-2.0
+//
+
+runtime_resource_overlay {
+    name: "WifiResZeus",
+    device_specific: true
+}

overlay/Wifi/AndroidManifest.xml

@@ -0,0 +1,11 @@
+<!--
+     Copyright (C) 2022 The LineageOS Project
+     SPDX-License-Identifier: Apache-2.0
+-->
+<manifest xmlns:android="http://schemas.android.com/apk/res/android"
+    package="com.android.wifi.resources.overlay.zeus">
+    <overlay android:targetPackage="com.android.wifi.resources"
+                   android:targetName="WifiCustomization"
+                   android:isStatic="true"
+                   android:priority="700"/>
+</manifest>

overlay/Wifi/res/values/config.xml

@@ -0,0 +1,9 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     Copyright (C) 2023 The LineageOS Project
+     SPDX-License-Identifier: Apache-2.0
+-->
+<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
+    <!-- Do not translate. Default access point SSID used for tethering -->
+    <string name="wifi_tether_configure_ssid_default" translatable="false">Xiaomi 12 Pro</string>
+</resources>

properties/system.prop

@@ -0,0 +1,2 @@
+# Xiaomi
+ro.product.mod_device=zeus_global

properties/vendor.prop

@@ -0,0 +1,2 @@
+# Sensors
+ro.vendor.sensors.notifier.light_sensors=5,33171089

proprietary-firmware.txt

@@ -0,0 +1,23 @@
+## All proprietary files from this list, unless pinned and noted otherwise,
+## are from zeus V816.0.4.0.ULBMIXM
+
+abl.img;AB
+aop.img;AB
+aop_config.img;AB
+bluetooth.img;AB
+cpucp.img;AB
+devcfg.img;AB
+dsp.img;AB
+featenabler.img;AB
+hyp.img;AB
+imagefv.img;AB
+keymaster.img;AB
+modem.img;AB
+qupfw.img;AB
+shrm.img;AB
+tz.img;AB
+uefi.img;AB
+uefisecapp.img;AB
+xbl.img;AB
+xbl_config.img;AB
+xbl_ramdump.img;AB

sensors/hals.conf

@@ -0,0 +1,4 @@
+sensors.ultrasoundproximity.so
+sensors.ssc.so
+sensors.touch.detect.so
+sensors.xiaomi.so

setup-makefiles.sh

@@ -0,0 +1,15 @@
+#!/bin/bash
+#
+# Copyright (C) 2016 The CyanogenMod Project
+# Copyright (C) 2017-2020 The LineageOS Project
+#
+# SPDX-License-Identifier: Apache-2.0
+#
+
+set -e
+
+export DEVICE=zeus
+export DEVICE_COMMON=sm8450-common
+export VENDOR=xiaomi
+
+"./../../${VENDOR}/${DEVICE_COMMON}/setup-makefiles.sh" "$@"

tequila_zeus.mk

@@ -0,0 +1,29 @@
+#
+# Copyright (C) 2022-2024 The LineageOS Project
+#
+# SPDX-License-Identifier: Apache-2.0
+#
+
+# Inherit from zeus device
+$(call inherit-product, device/xiaomi/zeus/device.mk)
+
+# Inherit from common tequila configuration
+$(call inherit-product, vendor/tequila/config/common_full_phone.mk)
+
+PRODUCT_NAME := tequila_zeus
+PRODUCT_DEVICE := zeus
+PRODUCT_MANUFACTURER := Xiaomi
+PRODUCT_BRAND := Xiaomi
+PRODUCT_MODEL := 2201122G
+
+PRODUCT_SYSTEM_NAME := zeus_global
+PRODUCT_SYSTEM_DEVICE := zeus
+
+PRODUCT_BUILD_PROP_OVERRIDES += \
+    PRIVATE_BUILD_DESC="zeus_global-user 14 UKQ1.230917.001 V816.0.4.0.ULBMIXM release-keys" \
+    TARGET_DEVICE=$(PRODUCT_SYSTEM_DEVICE) \
+    TARGET_PRODUCT=$(PRODUCT_SYSTEM_NAME)
+
+BUILD_FINGERPRINT := Xiaomi/zeus_global/zeus:14/UKQ1.230917.001/V816.0.4.0.ULBMIXM:user/release-keys
+
+PRODUCT_GMS_CLIENTID_BASE := android-xiaomi