In several places we check for a returned phandle value to be valid,
for that it must not be 0 or "-1".
Wrap this check in a static inline function in dtc.h, and use ~0U instead
of -1 on the way, to keep everything in the unsigned realm.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Message-Id: <20210618172030.9684-4-andre.przywara@arm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
With -Wsign-compare, compilers warn about a mismatching signedness
in comparisons in code using the "reservednum" variable.
There is obviously little sense in having a negative number of reserved
memory entries, so let's make this variable and all its users unsigned.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Message-Id: <20210611171040.25524-6-andre.przywara@arm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Logic is similar to strcmp_suffix in <kernel>/drivers/of/property.c with
the exception that strends allows string length to equal suffix length.
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Message-Id: <20210504035944.8453-3-ilya.lipnitskiy@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
With -Wsign-compare, compilers warn about a mismatching signedness in
comparisons in various parts of dtc.
Many variables are using signed types unnecessarily, as we never use
negative value in them.
Change their types to be unsigned, to prevent issues with comparisons.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Message-Id: <20201012161948.23994-7-andre.przywara@arm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Because of the convention of packed representations in property layouts,
it's not uncommon to have integer values in properties which aren't
naturally aligned. Thus, there are several places in the dtc code where we
cast a potentially unaligned byte pointer into an integer pointer and load
it directly. On a number of architectures (including sparc64 and arm) this
won't work and will cause a fault. In some cases it may be trapped and
emulated by the kernel, but not always.
Therefore, replace such direct unaligned reads with a helper which will
handle unaligned data reads (a variant on the fdtXX_ld() functions already
used in libfdt).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Replace instances of GPLv2 or later boilerplate with SPDX tags.
Signed-off-by: Rob Herring <robh@kernel.org>
Message-Id: <20190620211944.9378-2-robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The YAML output fails for overlays and when symbol generation are enabled
due to missing markers in the generated properties.
Add type markers when generating properties under '__symbols__' and
'__fixups__' nodes as well as target-path properties. As a side effect of
append_to_property() changes, this also sets type markers in
'__local_fixups__' node properties.
Signed-off-by: Rob Herring <robh@kernel.org>
Message-Id: <20190517202804.9084-1-robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Provide the new command-line option:
--annotate (abbreviated -T)
--annotate provides one or more filenames and line numbers indicating
the origin of a given line. The filename is expressed relative the the
filename provided on the command line. Nothing is printed for overlays,
etc.
-T can be repeated giving more verbose annotations. These consist of
one or more tuples of: filename, starting line, starting column, ending
line ending column. The full path is given for the file name.
Overlays, etc are annotated with <no-file>:<no-line>.
The verbose annotations may be too verbose for normal use.
There are numerous changes in srcpos.c to provide the relative filenames
(variables initial_path, initial_pathlen and initial_cpp, new functions
set_initial_path and shorten_to_initial_path, and changes in
srcfile_push and srcpos_set_line). The change in srcpos_set_line takes
care of the case where cpp is used as a preprocessor. In that case the
initial file name is not the one provided on the command line but the
one found at the beginnning of the cpp output.
shorten_to_initial_path only returns a string if it has some shortening
to do. Otherwise it returns NULL and relies on the caller to use the
initial string. This simplifies memory management, by making clear to
the caller whether a new string is allocated.
The new functions srcpos_string_comment, srcpos_string_first, and
srcpos_string_last print the annotations. srcpos_string_comment is
recursive to print a list of source file positions.
Various changes are sprinkled throughout treesource.c to print the
annotations.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Extend the parser to record positions, in build_node,
build_node_delete, and build_property.
srcpos structures are added to the property and node types, and to the
parameter lists of the above functions that construct these types.
Nodes and properties that are created by the compiler rather than from
parsing source code have NULL as the srcpos value.
merge_nodes, defined in livetree.c, uses srcpos_extend to combine
multiple positions, resulting in a list of positions. srcpos_extend
is defined in srcpos.c. New elements are added at the end. This
requires the srcpos type, define in srcpos.h, to be a list structure
with a next field. This next field is initialized to NULL in
srcpos.h, in the macro YYLLOC_DEFAULT invoked implicitly by the
generated parser code.
Another change to srcpos.c is to make srcpos_copy always do a full
copy, including a copy of the file substructure. This is required
because when dtc is used on the output of cpp, the successive detected
file names overwrite the file name in the file structure. The next
field does not need to be deep copied, because it is always NULL when
srcpos_copy is called; an assert checks for this. File names are only
updated in uncopied position structures.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This reverts commit baa1d2cf78.
Turns out this introduced memory badness. valgrind picks it up on
x86, but it straight out SEGVs on x86.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Extend the parser to record positions, in build_node, build_node_delete,
and build_property.
srcpos structures are added to the property and node types, and to the
parameter lists of the above functions that construct these types.
Nodes and properties that are created by the compiler rather than from
parsing source code have NULL as the srcpos value.
merge_nodes, defined in livetree.c, uses srcpos_extend to combine
multiple positions, resulting in a list of positions. srcpos_extend is
defined in srcpos.c. New elements are added at the end. The srcpos
type, define in srcpos.h, is now a list structure with a next field.
Another change to srcpos.c is to make srcpos_copy always do a full copy,
including a copy of the file substructure. This is required because
when dtc is used on the output of cpp, the successive detected file
names overwrite the file name in the file structure. The next field
does not need to be deep copied, because it is only updated in newly
copied positions and the positions to which it points have also been
copied. File names are only updated in uncopied position structures.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
YAML encoded DT is useful for validation of DTs using binding schemas.
The YAML encoding is an intermediate format used for validation and
is therefore subject to change as needed. The YAML output is dependent
on DTS input with type information preserved.
Signed-off-by: Grant Likely <grant.likely@arm.com>
[robh: make YAML support optional, build fixes, Travis CI test,
preserve type information in paths and phandles]
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Make type_marker_length available to other users of TYPE_* markers.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since commit 32b9c61307 "Preserve datatype markers when emitting dts
format", we no longer try to guess the value type. Instead, we reuse
the type of the datatype markers when they are present, if the type
is either TYPE_UINT* or TYPE_STRING.
This causes 'dtc -I fs' to crash:
Starting program: /root/dtc -q -f -O dts -I fs /proc/device-tree
/dts-v1/;
/ {
Program received signal SIGSEGV, Segmentation fault.
__strlen_power8 () at ../sysdeps/powerpc/powerpc64/power8/strlen.S:47
47 ld r12,0(r4) /* Load doubleword from memory. */
(gdb) bt
#0 __strlen_power8 () at ../sysdeps/powerpc/powerpc64/power8/strlen.S:47
#1 0x00007ffff7de3d10 in __GI__IO_fputs (str=<optimized out>,
fp=<optimized out>) at iofputs.c:33
#2 0x000000001000c7a0 in write_propval (prop=0x100525e0,
f=0x7ffff7f718a0 <_IO_2_1_stdout_>) at treesource.c:245
The offending line is:
fprintf(f, "%s", delim_start[emit_type]);
where emit_type is TYPE_BLOB and:
static const char *delim_start[] = {
[TYPE_UINT8] = "[",
[TYPE_UINT16] = "/bits/ 16 <",
[TYPE_UINT32] = "<",
[TYPE_UINT64] = "/bits/ 64 <",
[TYPE_STRING] = "",
};
/* Data blobs */
enum markertype {
TYPE_NONE,
REF_PHANDLE,
REF_PATH,
LABEL,
TYPE_UINT8,
TYPE_UINT16,
TYPE_UINT32,
TYPE_UINT64,
TYPE_BLOB,
TYPE_STRING,
};
Because TYPE_BLOB < TYPE_STRING and delim_start[] is a static array,
delim_start[emit_type] is 0x0. The glibc usually prints out "(null)"
when one passes 0x0 to %s, but it seems to call fputs() internally if
the format is exactly "%s", hence the crash.
TYPE_BLOB basically means the data comes from a file and we don't know
its type. We don't care for the former, and the latter is TYPE_NONE.
So let's drop TYPE_BLOB completely and use TYPE_NONE instead when reading
the file. Then, try to guess the data type at emission time, like the
code already does for refs and labels.
Instead of adding yet another check for TYPE_NONE, an helper is introduced
to check if the data marker has type information, ie, >= TYPE_UINT8.
Fixes: 32b9c61307
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If datatype markers are present in the property value, use them to
output the data in the correct format instead of trying to guess the
datatype. This also will preserve data grouping, such as in an
interrupts list.
This is a step forward for preserving and using datatype information
when processing DTS/DTB files. Schema validation tools can use the
datatype information to make sure a DT is correctly formed and
intepreted.
Signed-off-by: Grant Likely <grant.likely@arm.com>
[robh: rework marker handling and fix label output]
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The current code throws away all the data type and grouping information
when parsing the DTS source file, which makes it difficult to
reconstruct the data format when emitting a format that can express data
types (ie. dts and yaml). Use the marker structure to mark the beginning
of each integer array block (<> and []), and the datatype contained in
each (8, 16, 32 & 64 bit widths).
Signed-off-by: Grant Likely <grant.likely@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[robh: s/MARKER_/TYPE_/]
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
A number of platforms have a need to reduce the number of DT nodes,
mostly because of two similar constraints: the size of the DT blob, and
the time it takes to parse it.
As the DT is used in more and more SoCs, and by more projects, some
constraints start to appear in bootloaders running from SRAM with an
order of magnitude of 10kB. A typical DT is in the same order of
magnitude, so any effort to reduce the blob size is welcome in such an
environment.
Some platforms also want to reach very fast boot time, and the time it
takes to parse a typical DT starts to be noticeable.
Both of these issues can be mitigated by reducing the number of nodes in
the DT. The biggest provider of nodes is usually the pin controller and
its subnodes, usually one for each valid pin configuration in a given
SoC.
Obviously, a single, fixed, set of these nodes will be used by a given
board, so we can introduce a node property that will tell the DT
compiler to drop the nodes when they are not referenced in the tree, and
as such wouldn't be useful in the targetted system.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Commit 737b2df3, "overlay: Add syntactic sugar version of overlays"
introduced an empty rule for "devicetree" that created ambiguities in
the grammar and causes the following warning:
BISON dtc-parser.tab.c
dtc-parser.y: warning: 3 shift/reduce conflicts [-Wconflicts-sr]
Fix the grammar by explicitly testing for the condition the
new overlay grammar wants to use. This means duplicating a very small
amount of grammar processing code, but the alternative seems to be a
more invasive reorganization of the devicetree rule. Better to fix it
this way now and save the reorg for a separate patch.
Signed-off-by: Grant Likely <grant.likely@arm.com>
Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Every remaining usage of strneq() is, in fact, incorrect. They're trying
to check that the first n characters of one string exactly match another
string. But, they fall into the classic trap of strncmp() on which
strneq() is based. If n is less than the length of the second string, they
only check that the first string matches the start of the second, not the
whole of it.
To fix this, remove strneq() and replace it with a strprefixeq() function
which does what we want here.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
nodename_from_path() in flattree.c uses strneq() to test that one
string starts with another. This is, in fact, the only correct usage
of strneq() in the entire tree. To make things harder to confuse, add
a strstarts() function for this purpose.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In a number of places, dtc and associated tools and test code use
leading _ characters on identifiers to flag them as "internal", an
idiom taken from the Linux kernel. This is a bad idea in a userspace
program, because identifiers with a leading _ are reserved for the C
library / system.
In some cases, the extra _ served no real purpose, so simply drop it. In
others move to the end of the identifier, which is a convention we're free
to use for our own purposes.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
For simple overlays that use a single target there exists a
simpler syntax version.
&foo { }; generates an overlay with a single target at foo.
Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Many common bindings follow the same pattern of client properties
containing a phandle and N arg cells where N is defined in the provider
with a '#<specifier>-cells' property such as:
intc0: interrupt-controller@0 {
#interrupt-cells = <3>;
};
intc1: interrupt-controller@1 {
#interrupt-cells = <2>;
};
node {
interrupts-extended = <&intc0 1 2 3>, <&intc1 4 5>;
};
Add checks for properties following this pattern.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2a42b14 "dtc: check.c fix compile error" changed a format string using
%lx which wasn't correct for all platforms. Unfortunately it changed it to
%zx, which is wrong for a different set of platforms (and only right on
the others by accident). The parameter we're formatting here is uint64_t,
not size_t, so we need to use the PRIx64 macro from <inttypes.h> to get
this right.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add PCI bridge and device node checks. We identify PCI bridges with
'device_type = "pci"' as only PCI bridges should set that property. For
bridges, check that node name is pci or pcie, ranges and bus-range are
present, and #address-cells and #size-cells are correct.
For devices, check the reg property fields are correct for the first
element (the config address). Check that the unit address is formatted
corectly based on the reg property. Device unit addresses are in the
form DD or DD,F where DD is the device 0-0x1f and F is the function 0-7.
Also, check that the bus number is within the expected range defined by
bridge's bus-ranges.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Rob Herring <robh@kernel.org>
[dwg: Added a missing check dependency]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We have a number of explicit __GNUC__ conditionals to tell if we want to
use some gcc extensions for extra warnings. This cleans this up to use
a single conditional, defining convenience macros for those attributes.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
struct fdt_reserve_entry is defined in fdt.h to exactly mirror the
in-memory layout of a reserve entry in the flattened tree. Since that is
always big-endian, it uses fdt64_t elements, which have sparse annotations
marking them as not native endian.
However, in dtc, we also use struct fdt_reserve_entry inside struct
reserve_info, and use it with native endian values. This will cause sparse
errors.
This stops this abuse, making struct reserve_info have its own native
endian fields for the same information.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
For example:
src/arm/at91-ariag25.dtb: Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name
If output is to stdout then the prefix is "<stdout>: ".
This helps to direct the developer to where to look when multiple files are
being compiled in parallel.
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
struct boot_info is named that for historical reasons, and isn't
particularly meaningful. Essentially it contains all the information -
in "live" form from a single dts or dtb file. As we move towards support
for dynamic dt overlays, that name will become increasingly bad.
So, in preparation, rename it to dt_info. At the same time rename the
'the_boot_info' global to 'parser_output' since that's its actual purpose.
Unfortunately we do need the global unless we switch to bison's re-entrant
parser extensions, which would introduce its own complications.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch enable the generation of symbols & local fixup information
for trees compiled with the -@ (--symbols) option.
Using this patch labels in the tree and their users emit information
in __symbols__ and __local_fixups__ nodes.
The __fixups__ node make possible the dynamic resolution of phandle
references which are present in the plugin tree but lie in the
tree that are applying the overlay against.
Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There is one condition that need cat the dtb files
into one dtb.img which can support several boards
use same SoC platform.
And the original dtb file size is not aligned to any base.
This may cause "Synchronous Abort" when load from a unligned
address on some SoC machine, such as ARM.
So this patch implement the -a <aligned number> option to
pad zero at the end of dtb files and make the dtb size aligned
to <aligned number>.
Then, the aligned dtbs can cat together and load without "Synchronous
Abort".
Signed-off-by: Tim Wang <timwang@asrmicro.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
1) No variadic macros in the form "args..."; this is a GCC extension.
2) No empty struct initializers. In any case, there is very little to win:
{ } vs. { 0 }.
Signed-off-by: Andrei Errapart <andrei@errapartengineering.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Building on a RHEL6 system produced the following -Wshadow warnings in
fstree.c, util.c and checks.c:
cc1: warnings being treated as errors
checks.c: In function 'parse_checks_option':
checks.c:709: error: declaration of 'optarg' shadows a global
declaration
/usr/include/getopt.h:59: error: shadowed declaration is here
make[1]: *** [checks.o] Error 1
make[1]: *** Waiting for unfinished jobs....
make[1]: *** Waiting for unfinished jobs....
cc1: warnings being treated as errors
fstree.c: In function 'read_fstree':
fstree.c:40: error: declaration of 'tmpnam' shadows a global
declaration
/usr/include/stdio.h:208: error: shadowed declaration is here
make[1]: *** [fstree.o] Error 1
cc1: warnings being treated as errors
util.c: In function 'xstrdup':
util.c:42: error: declaration of 'dup' shadows a global declaration
/usr/include/unistd.h:528: error: shadowed declaration is here
Fix all of these -Wshadow warnings by using slightly different variable
names which won't collide with anything else.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
We already use the C99 bool type from stdbool.h in a few places. However
there are many other places we represent boolean values as plain ints.
This patch changes that.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
I want to use this in more places, so put it in util.h rather than
copying & pasting it into another file.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The previous definition of for_each_*() would always include the very
first object within the list, irrespective of whether it was marked
deleted, since the deleted flag was not checked on the first object,
but only on any "next" object.
Fix for_each_*() to check the deleted flag in the loop body every
iteration to correct this.
Incidentally, this change is why commit 45013d8 dtc: "Add ability to
delete nodes and properties" only caused two "make checkm" failures;
only two tests actually use multiple labels on the same property or
node. With this current change applied, but commit 317a5d9 "dtc: zero
out new label objects" reverted, "make checkm" fails 29 times; i.e.
for every test that uses any labels at all.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
dtc currently allows the contents of properties to be changed, and the
contents of nodes to be added to. There are situations where removing
properties or nodes may be useful. This change implements the following
syntax to do that:
/ {
/delete-property/ propname;
/delete-node/ nodename;
};
or:
/delete-node/ &noderef;
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
This patch adds -W and -E options to dtc which allow toggling on and off
of the various built in semantic checks on the tree.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently each of the semantic checks in checks.c has a "level" between
IGNORE and ERROR. This single level makes it awkward to implement the
semantics we want for toggling the checks on the command line.
This patch reworks the code to instead have separate boolean flags for
warning and error. At present having both flags set will have the same
effect as having just the error flag set, but this can change in the
future.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This function deals with appending integers of various sizes (8, 16
32, and 64 bit currently). It handles endianess conversions. If the
integer will not fit in the requested number of bits of storage it
will have it's high bits ignored.
This patch also rewrites data_append_cell and data_append_addr to use
data_append_integer.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
This patch adds a "dtdiff" script to do a useful form diff of two
device trees. This automatically converts the tree to dts form (if
it's not already) and uses a new "-s" option in dtc to "sort" the
tree. That is, it sorts the reserve entries, it sorts the properties
within each node by name, and it sorts nodes by name within their
parent.
This gives a pretty sensible diff between the trees, which will ignore
semantically null internal rearrangements (directly diffing the dts
files can give a lot of noise due to the order changes).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch allows the following construct:
/ {
property-a = "old";
property-b = "does not change";
};
/ {
property-a = "changed";
property-c = "new";
node-a {
};
};
Where the later device tree overrides the properties found in the
earlier tree. This is useful for laying down a template device tree
in an include file and modifying it for a specific board without having
to clone the entire tree.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
At present, both the grammar and our internal data structures mean
that there can be only one label on a node or property. This is a
fairly arbitrary constraint, given that any number of value labels can
appear at the same point, and that in C you can have any number of
labels on the same statement.
This is pretty much a non-issue now, but it may become important with
some of the extensions that Grant and I have in mind. It's not that
hard to change, so this patch does so, allowing an arbitrary number of
labels on any given node or property. As usual a testcase is added
too.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Currently, nothing will stop you from re-using the same label string
multiple times in a dts, e.g.:
/ {
samelabel: prop1 = "foo";
samelabel: prop2 = "bar";
};
or
/ {
samelabel: prop1 = "foo";
samelabel: subnode {
};
};
When using node references by label, this could lead to confusing
results (with no warning), and in -Oasm mode will result in output
which the assembler will complain about (since it too will have
duplicate labels).
This patch, therefore, adds code to checks.c to give errors if you
attempt to re-use the same label. It treats all labels (node,
property, and value) as residing in the same namespace, since the
assembler will treat them so for -Oasm mode.
Testcases for the new code are also added.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently, when in -Idts -Odtb or -Ifs -Odtb modes, dtc always
defaults to using 0 as the value for the boot_cpuid_phys header field.
That's correct quite often, but there are some systems where there is
no CPU with hardware ID of 0, or where we don't want to use the CPU
with hardware ID 0 at all (e.g. for AMP-style partitioning). The only
way to override this default currently, is with the -b command line
option.
This patch improves dtc to instead base the default boot_cpuid_phys
value on the reg property of the first listed subnode of /cpus. This
means that dtc will get boot_cpuid_phys correct by default in a
greater proportion of cases (since the boot cpu is usually listed
first, and this way at least the boot_cpuid_phys default will match
some existing cpu node). If the node doesn't exist or has an invalid
'reg' property (missing or not 4 bytes in length), then
boot_cpuid_phys is set to 0.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch cleans up our handling of input files, particularly dts
source files, but also (to an extent) other input files such as those
used by /incbin/ and those used in -I dtb and -I fs modes.
We eliminate the current clunky mechanism which combines search paths
(which we don't actually use at present) with the open relative to
current source file behaviour, which we do.
Instead there's a single srcfile_relative_open() entry point for
callers which opens a new input file relative to the current source
file (which the srcpos code tracks internally). It doesn't currently
do search paths, but we can add that later without messing with the
callers, by drawing the search path from a global (which makes sense
anyway, rather than shuffling it around the rest of the processing
code).
That suffices for non-dts input files. For the actual dts files,
srcfile_push() and srcfile_pop() wrappers open the file while also
keeping track of it as the current source file for future opens.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently, the Linux kernel, libfdt and dtc, when using flattened
device trees encode a node's phandle into a property named
"linux,phandle". The ePAPR specification, however - aiming as it is
to not be a Linux specific spec - requires that phandles be encoded in
a property named simply "phandle".
This patch adds support for this newer approach to dtc and libfdt.
Specifically:
- fdt_get_phandle() will now return the correct phandle if it
is supplied in either of these properties
- fdt_node_offset_by_phandle() will correctly find a node with
the given phandle encoded in either property.
- By default, when auto-generating phandles, dtc will encode
it into both properties for maximum compatibility. A new -H
option allows either only old-style or only new-style
properties to be generated.
- If phandle properties are explicitly supplied in the dts
file, dtc will not auto-generate ones in the alternate format.
- If both properties are supplied, dtc will check that they
have the same value.
- Some existing testcases are updated to use a mix of old and
new-style phandles, partially testing the changes.
- A new phandle_format test further tests the libfdt support,
and the -H option.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Now that we have a util.[ch] file shared between dtc and
convert-dtsv0, move some functions which are currently duplicated in
the two to util files. Specifically we move the die(), xmalloc() and
xrealloc() functions.
While we're at it, add standard double-include protection to util.h
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Many places in dtc use strdup(), but none of them actually check the
return value to see if the implied allocation succeeded. This is a
potential bug, which we fix in the patch below by replacing strdup()
with an xstrdup() which in analogy to xmalloc() will quit with a fatal
error if the allocation fails.
I felt the introduciton of util.[ch] was a better choice
for utility oriented code than directly using srcpos.c
for the new string function.
This patch is a re-factoring of Dave Gibson's similar patch.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
